This change allows the use of the driver with ACPI via PRP0001
and remove an example of an anti pattern I'm trying to remove from IIO.
Also adjust includes to reflect this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-8-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Also use device_get_match_data() rather than devicetree only version.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200910173242.621168-7-jic23@kernel.org
Given that an ACPI binding must start with 3 or 4 capitals,
this cannot represent a valid binding.
It seems unlikely anything out there is using it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Maury Anderson <maury.anderson@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-6-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Whilst this driver has an ACPI binding, it is not of a form
that is valid under ACPI so will be dropped shortly.
Also switch to device_get_match_data() and switch headers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Maury Anderson <maury.anderson@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-5-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Drop them to remove this restriction.
Also switch headers to reflect this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20200910173242.621168-4-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Drop them to remove this restriction.
Also switch of.h for mod_devicetable.h include given use of
struct of_device_id which is defined in that header.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-3-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Drop them to remove this restriction.
Also added mod_devicetable.h include given use of struct of_device_id
which is defined in that header.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Phil Reid <preid@eletromag.com.au>
Link: https://lore.kernel.org/r/20200910173242.621168-2-jic23@kernel.org
I'd like to be enable W=1 for all IIO builds as it catches real issues as well
as more minor documentation issues such as this (also good to fix though!)
drivers/iio/imu/adis16400.c:183: warning: Function parameter or member 'avail_scan_mask' not described in 'adis16400_state'
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200913132115.800131-2-jic23@kernel.org
Currently the iio_buffer_{alloc,free}_sysfs_and_mask() take 'indio_dev' as
primary argument. This change splits the main logic into a private function
that takes an IIO buffer as primary argument.
That way, the functions can be extended to configure the sysfs for multiple
buffers.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200917125951.861-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use only one line for the closing bracket of the last entry and the
opening bracket for the next one to keep the style across the whole
array consistent. Also add a "sentinel" comment to the last entry and
remove the comma to ensure that there won't be any entry after it.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200915192621.13202-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We should probably print what the expected chip-ID is. We already have
that information available, based on the device specified via
device-tree.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916083128.73729-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These docs are both suffering from being out of date, and from being
superceeded by the documentation in Documentation/driver-api/iio
Note the inkern.txt drop is left for now as this is an area not
well covered by the more recent documentation outside staging.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200905174721.216452-5-jic23@kernel.org
There are no remaining light drivers in staging/iio.
The content of this file are either included in the non staging
ABI docs, or don't seem to be used in any current driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200905174721.216452-4-jic23@kernel.org
These seem to be up to date but never moved out of staging when the driver
did. Hence let us move them out now.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Cc: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20200905174721.216452-3-jic23@kernel.org
Whilst there is some useful info in here, it can be easily
obtained from datasheets. Some of the info should perhaps
be incorporated into a device tree bindings doc.
As this didn't move out of staging with the driver, I'm suggesting
we just drop it. We don't generally carry per driver documentation
with the exception of non standard ABI which is not the case here.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Roland Stigge <stigge@antcom.de>
Link: https://lore.kernel.org/r/20200905174721.216452-2-jic23@kernel.org
Drop `adis_setup_buffer_and_trigger()`. All users were updated to use
the devm version of this function. This avoids having almost the same
code repeated.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-11-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-10-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-9-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-8-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-7-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-6-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-5-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC in S5Pv210 does not have ADC phy registers in separate block for
which syscon would be needed. Remove this requirement to fix dtbs_check
warnings like:
arch/arm/boot/dts/s5pv210-fascinate4g.dt.yaml: adc@e1700000: 'samsung,syscon-phandle' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200910161933.9156-2-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC in S3C/S5P/Exynos SoCs can be used also for handling touch
screen. In such case the second interrupt is required. This second
interrupt can be anyway provided, even without touch screens. This
fixes dtbs_check warnings like:
arch/arm/boot/dts/s5pv210-aquila.dt.yaml: adc@e1700000: interrupts: [[23], [24]] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/r/20200910161933.9156-1-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Conversion from txt to yaml. The binding documents that
as not all boards will make use of the ADC channels via a consumer
driver. It does no harm however, so we will leave it as required.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: David Lechner <david@lechnology.com>
Cc: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20200830161154.3201-3-jic23@kernel.org
Simple binding conversion from txt to yaml.
Only addition was #io-channel-cells to allow for potential consumers
of the channels on this device.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20200830161154.3201-2-jic23@kernel.org
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock.
The lock protect the state of the device from potential concurrent writes.
The device is configured via a sequence of SPI writes, and this lock is
meant to prevent the start of another sequence before another one has
finished.
This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916092731.77220-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state from potential concurrent write
accesses from userspace. The write operation requires an SPI write, then
toggling of a GPIO, so the lock aims to protect the sanity of the entire
sequence of operation.
This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916092535.76527-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock. The lock protects against potential races when
reading the CR reg and then updating, so that the state of pm_runtime
is consistent between the two operations.
This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/20200916092349.75647-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend support to read/write byte data from/to the device using
debugfs iio interface.
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910180450.29696-4-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include 'interrupts' property and provide a suitable example for using
a GPIO interrupt line.
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Link: https://lore.kernel.org/r/20200910180450.29696-3-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Provide a way for continuous data capture by setting up buffer support. The
data ready signal exposed at the SYNC pin of the ADXRS290 is exploited as
a hardware interrupt which triggers to fill the buffer.
Triggered buffer setup was tested with both hardware trigger (DATA_RDY) and
software triggers (sysfs-trig & hrtimer).
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910180450.29696-2-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of devm_add_action_or_reset() hook to switch device into STANDBY
mode during standard resource unwinding. The patch includes a helper
function, in the form of adxrs290_set_mode(), to realise driving the
device into STANDBY mode.
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910122711.16670-1-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Conversion of error paths to dev_err_probe() dropped one return
statement. The driver will continue to probe if getting booster
regulator fails.
Fixes: ce30eeb613 ("iio: adc: stm32: Simplify with dev_err_probe()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1599727927-7776-1-git-send-email-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We found some sensors which are much slower (20% at room temperature)
than nominal. According to the data sheet, up to 27% is possible. Now I
add 33% to the nominal time out, hopefully this is enough.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200909154439.10308-1-ceggers@arri.de
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since object temperature might be different than the sensor temperature
the infrared sensors should provide an interface to inject ambient
temperature. This was in past done via write to ambient temperature
interface (in_temp_ambient_raw), but I think most people did not know
about it. This solution introduces a new iio type of the CALIBAMBIENT
which is hopefully more descriptive and more explicit about the purpose
and capabilities of the sensors.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200906210231.383976-1-cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hartmut Knaack was an active reviewer and contributor to the IIO
subsystem and drivers. However his last message on LKML is from
October 2015.
In thanks for Hartmut's effort, move him name to the Credits.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio <linux-iio@vger.kernel.org>
Link: https://lore.kernel.org/r/20200903181926.5606-2-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Emails to Beniamin Bia bounce with no such address so remove him from
maintainers. After this removal, many entries for Analog Devices Inc
IIO drivers look exactly the same so consolidate them.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio <linux-iio@vger.kernel.org>
Link: https://lore.kernel.org/r/20200903181926.5606-1-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On one board I found that:
probe of 5-0028 returned 1 after 259547 usecs
While some of this time is attributable to the pile of i2c transfers
that we do at probe time, the lion's share (over 200 ms) is sitting
waiting in the polling loop in sx9310_init_compensation() waiting for
the hardware to indicate that it's done.
There's no reason to block probe of all other devices on our probe.
Turn on async probe.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Link: https://lore.kernel.org/r/20200901081920.v2.1.Id02b2f451b3eed71ddd580f4b8b44b3e33e84970@changeid
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There seems no reason to allow for compile-testing on ARM only, so
remove this restriction.
Build-tested with allyesconfig on x86.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200904170416.16061-1-alex.dewar90@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are few blank lines that split structure definitions
with their users. Remove them to increase readability.
While here, update copyright year.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver is quite likely used only on ACPI based platforms and
rarely build with CONFIG_ACPI=n. Even though, the few dozens of bytes
is better than ugly ifdeffery and inclusion of heavy header.
As a result, replace acpi.h with mod_devicetable.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron