The function tegra_gpio_debuginit() just calls debugfs_create_file()
and given that there is already a stub function implemented for
debugfs_create_file() when CONFIG_DEBUG_FS is not enabled, there is
no need for the function tegra_gpio_debuginit() and so remove it.
Finally, use a space and not a tab between the #ifdef and
CONFIG_DEBUG_FS.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- add include/linux/gpio.h to .gitignore in /tools
- improve and simplify code in the em driver
- simplify code in max732x by using devm helpers (including the new
devm_i2c_new_dummy_device())
- fix SPDX header for madera
- remove checking of return values of debugfs routines in gpio-mockup
-----BEGIN PGP SIGNATURE-----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=55gk
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.3-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio: updates for v5.3
- add include/linux/gpio.h to .gitignore in /tools
- improve and simplify code in the em driver
- simplify code in max732x by using devm helpers (including the new
devm_i2c_new_dummy_device())
- fix SPDX header for madera
- remove checking of return values of debugfs routines in gpio-mockup
The siox driver is hardcoding a default type of
IRQ_TYPE_EDGE_RISING to the irq helper, but this should only
be applicable to old boardfiles and odd device tree irqchips
with just onecell irq (no flags). I doubt this is the case
with the siox, I think all consumers specify the flags they
use in the device tree.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_remove() was called on the errorpath if
gpiochip_add() failed: this is wrong, if the chip failed
to add it is not there so it should not be removed.
Fixes: be8c8facc7 ("gpio: new driver to work with a 8x12 siox")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip.
For chained irqchips this is a pretty straight-forward
conversion.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It is fine to ignore the return value (and encouraged),
so no need to cast away the return value, you will not get
a build warning at all.
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It is fine to ignore the return value (and encouraged), so need to cast
away the return value, you will not get a build warning at all.
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sort the definitions for the individual GPIO drivers
in the Makefile by object file name. Align all entries
while we're at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reduce driver init boilerplate by using the new
module_siox_driver() macro.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add more helper macros for trivial driver init cases, similar to the
already existing module_platform_driver() or module_i2c_driver().
This helps to reduce driver init boilerplate.
Signed-off-by: Enrico Weigelt <info@metux.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
this driver deserves a bit more cleanup, to get rid of the global
variable giu_base, which makes it single-instance-only.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
don't need the temporary variable "dev", directly use &pdev->dev
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We already have the struct device* pointer in a local variable,
so we can write this a bit shorter.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A tab sneaked in, where it shouldn't be.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Improve readability a bit by commenting #if/#else/#endif statements
with the checked preprocessor symbols.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pointer to the struct platform_device in the driver's private
data struct is never used and therefore can be dropped.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Bamvor Jian Zhang <bamv2005@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Bartosz: removed one more check for debugfs return value]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
GPL-2.0-only is the preferred way of expressing v2 of the GPL, so switch
to that and remove some redundant copyright notices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We already have an array named "parents" so instead
of letting one point to the other, simply allocate a
dynamic array to hold the parents, just one if desired
and drop the number of members in gpio_irq_chip by
1. Rename gpiochip to gc in the process.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We now have two APIs for registering GPIOLIB_IRQCHIP, this is not
working and creating confusion. Add a TODO item to fix it up.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip.
For chained irqchips this is a pretty straight-forward
conversion.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If an edge interrupt triggers while entering idle just before we save
GPIO datain register to saved_datain, the triggered GPIO will not be
noticed on wake-up. This is because the saved_datain and GPIO datain
are the same on wake-up in omap_gpio_unidle(). Let's fix this by
ignoring any pending edge interrupts for saved_datain.
This issue affects only idle states where the GPIO module internal
wake-up path is operational. For deeper idle states where the GPIO
module gets powered off, Linux generic wakeirqs must be used for
the padconf wake-up events with pinctrl-single driver. For examples,
please see "interrupts-extended" dts usage in many drivers.
This issue can be somewhat easily reproduced by pinging an idle system
with smsc911x Ethernet interface configured IRQ_TYPE_EDGE_FALLING. At
some point the smsc911x interrupts will just stop triggering. Also if
WLCORE WLAN is used with EDGE interrupt like it's documentation specifies,
we can see lost interrupts without this patch.
Note that in the long run we may be able to cancel entering idle by
returning an error in gpio_omap_cpu_notifier() on pending interrupts.
But let's fix the bug first.
Also note that because of the recent clean-up efforts this patch does
not apply directly to older kernels. This does fix a long term issue
though, and can be backported as needed.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The FMC subsystem was created in 2012 with the ambition to
drive development of drivers for this hardware upstream.
The current implementation has architectural flaws and would
need to be revamped using real hardware to something that can
reuse existing kernel abstractions in the subsystems for e.g.
I2C, FPGA and GPIO.
We have concluded that for the mainline kernel it will be
better to delete the subsystem and start over with a clean
slate when/if an active maintainer steps up.
For details see:
https://lkml.org/lkml/2018/10/29/534
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Cc: Pat Riehecky <riehecky@fnal.gov>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irq_startup() method returns an unsigned int, but in __irq_startup()
it is assigned to an int. However, nothing checks for errors, so any
error that is returned is ignored.
Remove the check for GPIO-input mode and the error return.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We must never alter the register tables; these are read-only as far
as the driver is concerned. Constify these tables.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use local variables to store the base iomem address and regs table
pointer like omap_gpio_init_context() does. Not only does this make
the function neater, it also avoids unnecessary reloads of the same
data multiple times.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When a GPIO block has the set/clear dataout registers implemented, it
also has the normal dataout register implemented. Reading this register
reads the current GPIO output state, and writing it sets the GPIOs to
the explicit state. This is the behaviour that we want when saving and
restoring the context, so use the dataout register exclusively.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
omap_set_gpio_irqenable() calls two helpers that are almost the same
apart from whether they set or clear bits. We can consolidate these:
- in the set/clear bit register case, we can perform the operation on
our saved context copy and write the appropriate set/clear register.
- otherwise, we can use our read-modify-write helper and invert enable
if irqenable_inv is set.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This function open-codes an exclusive-or bitwise operation using an
if() statement and explicitly setting or clearing the bit. Instead,
use an exclusive-or operation instead, and simplify the function.
We can combine the preprocessor conditional using IS_ENABLED() and
gain some additional compilation coverage.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We already have a read-modify-write helper, but there's more that can
be done with a read-modify-write helper if it returned the new value.
Modify the existing helper to return the new value, and arrange for
it to take one less argument by having the caller compute the register
address.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
bank->level_mask is merely the bitwise or of the level detection
context which we have already read in this function. Rather than
repeating additional reads, compute it from the values already
read.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One of the reasons for set_multiple() to exist is to allow multiple
GPIOs on the same chip to be changed simultaneously - see commit
5f42424354 ("gpiolib: allow simultaneous setting of multiple GPIO
outputs"):
- Simultaneous glitch-free setting of multiple pins on any kind of
parallel bus attached to GPIOs provided they all reside on the
same chip and bank.
In order for this to work, we should not use the atomic set/clear
registers, but instead read-modify-write the dataout register. We
already take the spinlock to ensure that happens atomically, so
move the code into the set_multiple() function and kill the two
helper functions.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no reason to have helper functions to read the datain and
dataout registers when they are only used in one location. Simplify
this code to make it more readable.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
omap_gpio_get() calls omap_get_gpio_datain() or omap_get_gpio_dataout()
to read the GPIO state. These two functions are only called from this
method, so they don't add much value. Move their contents into
omap_gpio_get() method and simplify.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Architectures are single-copy atomic, which means that simply reading
a register is an inherently atomic operation. There is no need to
take a spinlock here.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move these two functions to live beside the rest of the gpio chip
implementation, rather than in the middle of the irq chip
implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irq_ack method does not fit our hardware requirements. Edge
interrupts must be cleared before we handle them, and level interrupts
must be cleared after handling them.
We handle the interrupt clearance in our interrupt handler for edge IRQs
and in the unmask method for level IRQs.
Replace the irq_ack method with the no-op method from the dummy irq
chip.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The edge interrupt handling was effectively:
isr = ISR_reg & enabled;
if (bank->level_mask)
level_mask = bank->level_mask & enabled;
else
level_mask = 0;
edge = isr & ~level_mask;
When bank->level_mask is zero, level_mask will be computed as zero
anyway, so the if() statement is redundant. We are then left with:
isr = ISR_reg & enabled;
level_mask = bank->level_mask & enabled;
edge = isr & ~level_mask;
This can be simplified further to:
isr = ISR_reg & enabled;
edge = isr & ~bank->level_mask;
since the second mask with 'enabled' is redundant.
Improve the associated comment as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit c4791bc6e3 ("gpio: omap: drop omap_gpio_list") removed the
list head and addition to the list head of each gpio bank, but failed
to remove the list_del() call and the node inside struct gpio_bank.
Remove these too.
Fixes: c4791bc6e3 ("gpio: omap: drop omap_gpio_list")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 384ebe1c28 ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e8998 ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.
This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.
Fixes: 4e962e8998 ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Documentation states:
NOTE: There must be a correlation between the wake-up enable and
interrupt-enable registers. If a GPIO pin has a wake-up configured
on it, it must also have the corresponding interrupt enabled (on
one of the two interrupt lines).
Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt. This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.
If we do any clearing, clear between the interrupt enable/disable and
trigger setting.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The stmmac driver currently ignores the GPIO flags which are passed via
devicetree because it operates with legacy GPIO numbers instead of GPIO
descriptors. stmmac assumes that the GPIO is "active HIGH" by default.
This can be overwritten by setting "snps,reset-active-low" to make the
reset line "active LOW".
Recent Amlogic SoCs (G12A which includes S905X2 and S905D2 as well as
G12B which includes S922X) use GPIOZ_14 or GPIOZ_15 for the PHY reset
line. These GPIOs are special because they are marked as "3.3V input
tolerant open drain" pins which means they can only drive the pin output
LOW (to reset the PHY) or to switch to input mode (to take the PHY out
of reset).
The GPIO subsystem already supports this with the GPIO_OPEN_DRAIN and
GPIO_OPEN_SOURCE flags in the devicetree bindings.
Add the stmmac PHY reset line specific active low parsing to gpiolib-of
so stmmac can be ported to GPIO descriptors while being backwards
compatible with device trees which use the "old" way of specifying the
polarity.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Keeping the irq_chip definition static shares it with multiple instances
of the altera gpiochip in the system. This is bad and now we get this
warning from gpiolib core:
"detected irqchip that is shared with multiple gpiochips: please fix the
driver."
Hence, move the irq_chip definition from being driver static into the
struct altera_gpio_chips. So a unique irq_chip is used for each gpiochip
instance.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver was using the OF GPIO helper API, but barely used any of its
features and it cost more code than it saved. Also, the OF GPIO code is
now deprecated. Convert it to use a more standard setup and use devm
APIs for initialization to avoid the need for a remove function.
Our rationale for this change is that we are using the Xilinx GPIO with
resources injected using the MFD core rather than on the device tree
itself. Using platform rather than OF-specific resources allows this to
work for free.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jon Hunter