Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
Every caller has a readily available vfio_device pointer, use that instead
of passing in a generic struct device. The struct vfio_device already
contains the group we need so this avoids complexity, extra refcountings,
and a confusing lifecycle model.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The next patch wants the vfio_device instead. There is no reason to store
a pointer here since we can container_of back to the vfio_device.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
All callers have a struct vfio_device trivially available, pass it in
directly and avoid calling the expensive vfio_group_get_from_dev().
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
clock_delta is declared as unsigned long in various places. However,
the clock sync delta can be negative. This would add a huge positive
offset in clock_sync_global where clock_delta is added to clk.eitod
which is a 72 bit integer. Declare it as signed long to fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use a helper to set driver_override to the reduce amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last useful member in this struct is the supported_type_groups, move
it to the mdev_driver and delete mdev_parent_ops.
Replace it with mdev_driver as an argument to mdev_register_device()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-33-hch@lst.de
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
cleanup the s390's use of the timer API
- del_timer() contains timer_pending() condition
- mod_timer(timer, expires) is equivalent to:
del_timer(timer);
timer->expires = expires;
add_timer(timer);
If the timer is inactive it will be activated, using add_timer() on
condition !timer_pending(&private->timer) is redundant.
Just cleanup, no logic change.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.
Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Protected virtualization guests have to use shared pages for airq
notifier bit vectors and summary bytes or bits, thus these need to be
allocated as DMA coherent memory. Commit b50623e5db ("s390/airq: use
DMA memory for adapter interrupts") took care of the notifier bit
vectors, but omitted to take care of the summary bytes/bits.
In practice this omission is not a big deal, because the summary ain't
necessarily allocated here, but can be supplied by the driver. Currently
all the I/O we have for SE guests is virtio-ccw, and virtio-ccw uses a
self-allocated array of summary indicators.
Let us cover all our bases nevertheless!
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This helps to avoid several merge conflicts later.
* fixes:
s390/extable: fix exception table sorting
s390/ftrace: fix arch_ftrace_get_regs implementation
s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call.
Fixes: 32ef938815 ("s390/cio: Add support for FCES status notification")
Cc: stable@vger.kernel.org
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All callers of set_buf_states() are already making sure that 'count'
is not 0. So don't check it an additional time.
Note that our own code also doesn't _require_ the count to be sane
(ie. we can't overrun an array or similar). So worst case HW would
simply reject the SQBS operation and report an error.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The callers know what type of queue they want to work with. Introduce
type-specific variants to add buffers on an {Input,Output} queue, so
that we can avoid some function parameters and the de-muxing into
type-specific hot paths.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The callers know what type of queue they want to inspect. Introduce
type-specific variants to inspect an {Input,Output} queue, so that we
can avoid one function parameter and some conditional branches in the
hot paths.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
qdio_handle_activate_check() tries to re-use one of the queue-specific
handlers to report that the ACTIVATE ccw has been terminated. But the
logic to select that handler is overly complex - in practice both
qdio drivers have at least one Input Queue, so we never take the other
paths.
Make things more obvious by removing this unused code, and clearly
spelling out that we re-use the Input Handler for generic error
reporting. This also paves the way for a world without queue-specific
error handlers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
qdio_handle_activate_check() re-uses a queue-specific handler to report
that the ACTIVATE ccw has been terminated. It uses either the first
input or output queue, so we can hard-code q->nr as 0. Also don't
access the q->irq_ptr parent pointer, we already have a pointer to
the qdio_irq.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The qdio_irq contains only two fields that are directly exposed to the
HW (ccw and qib). And only the ccw needs to reside in 31-bit memory. So
allocate it separately, and remove the GFP_DMA constraint from the
qdio_irq allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fetch the individual CIWs when we actually need them, rather than
fetching both of them in qdio_setup_irq() and then needing to cache
them inside the qdio_irq.
Also deal with the error when a CIW is not available, instead of
silently dropping this error condition in qdio_setup_irq()'s caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
commit fa1a8c23eb ("s390: cio: Delay uevents for subchannels")
introduced suppression of uevents for a subchannel until after it is
clear that the subchannel would not be unregistered again
immediately. This was done to avoid uevents being generated for I/O
subchannels with no valid device, which can happen on LPAR.
However, this also has some drawbacks: All subchannel drivers need to
manually remove the uevent suppression and generate an ADD uevent as
soon as they are sure that the subchannel will stay around. This misses
out on all uevents that are not the initial ADD uevent that would be
generated while uevents are suppressed; for example, all subchannels
were missing the BIND uevent.
As uevents being generated even for I/O subchannels without an
operational device turned out to be not as bad as missing uevents and
complicating the code flow, let's remove uevent suppression for
subchannels.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
[cohuck@redhat.com: modified changelog]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20211122103756.352463-2-vneethv@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the coccicheck warnings:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/1634280655-4908-1-git-send-email-wangqing@vivo.com
[hca@linux.ibm.com: fix indentation]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Add support for ftrace with direct call and ftrace direct call samples.
- Add support for kernel command lines longer than current 896 bytes and
make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX
FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F
DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq
wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U
IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR
3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE
QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ==
=k0Ab
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for ftrace with direct call and ftrace direct call
samples.
- Add support for kernel command lines longer than current 896 bytes
and make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and
strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]
* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
s390: make command line configurable
s390: support command lines longer than 896 bytes
s390/kexec_file: move kernel image size check
s390/pci: add s390_iommu_aperture kernel parameter
s390/spinlock: remove incorrect kernel doc indicator
s390/string: use generic strlcpy
s390/string: use generic strrchr
s390/ap: function rework based on compiler warning
s390/cio: make ccw_device_dma_* more robust
s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
s390/hmcdrv: fix kernel doc comments
s390/ap: new module option ap.useirq
s390/cpumf: Allow multiple processes to access /dev/hwc
s390/bitops: return true/false (not 1/0) from bool functions
s390: add support for BEAR enhancement facility
s390: introduce nospec_uses_trampoline()
s390: rename last_break to pgm_last_break
s390/ptrace: add last_break member to pt_regs
s390/sclp: sort out physical vs virtual pointers usage
s390/setup: convert start and end initrd pointers to virtual
...
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=AsTx
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
* tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits)
vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()
vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions
vfio/ccw: Use functions for alloc/free of the vfio_ccw_private
vfio/ccw: Remove unneeded GFP_DMA
vfio: Use cdev_device_add() instead of device_create()
vfio: Use a refcount_t instead of a kref in the vfio_group
vfio: Don't leak a group reference if the group already exists
vfio: Do not open code the group list search in vfio_create_group()
vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier()
vfio/pci: Add OpRegion 2.0+ Extended VBT support.
vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER
vfio/iommu_type1: remove the "external" domain
vfio/iommu_type1: initialize pgsize_bitmap in ->open
vfio/spapr_tce: reject mediated devices
vfio: clean up the check for mediated device in vfio_iommu_type1
vfio: remove the unused mdev iommu hook
vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h>
vfio: remove unused method from vfio_iommu_driver_ops
vfio: simplify iommu group allocation for mediated devices
vfio: remove the iommudata hack for noiommu groups
...
This is a more complicated conversion because vfio_ccw is sharing the
vfio_device between both the mdev_device, its vfio_device and the
css_driver.
The mdev is a singleton, and the reason for this sharing is so the extra
css_driver function callbacks to be delivered to the vfio_device
implementation.
This keeps things as they are, with the css_driver allocating the
singleton, not the mdev_driver.
Embed the vfio_device in the vfio_ccw_private and instantiate it as a
vfio_device when the mdev probes. The drvdata of both the css_device and
the mdev_device point at the private, and container_of is used to get it
back from the vfio_device.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mdev_device should only be used in functions assigned to ops callbacks,
interior functions should use the struct vfio_ccw_private instead of
repeatedly trying to get it from the mdev.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Makes the code easier to understand what is memory lifecycle and what is
other stuff.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since the ccw_io_region was split out of the private the allocation no
longer needs the GFP_DMA. Remove it.
Reported-by: Christoph Hellwig <hch@infradead.org>
Fixes: c98e16b2fa ("s390/cio: Convert ccw_io_region to pointer")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since commit 48720ba568 ("virtio/s390: use DMA memory for ccw I/O and
classic notifiers") we were supposed to make sure that
virtio_ccw_release_dev() completes before the ccw device and the
attached dma pool are torn down, but unfortunately we did not. Before
that commit it used to be OK to delay cleaning up the memory allocated
by virtio-ccw indefinitely (which isn't really intuitive for guys used
to destruction happens in reverse construction order), but now we
trigger a BUG_ON if the genpool is destroyed before all memory allocated
from it is deallocated. Which brings down the guest. We can observe this
problem, when unregister_virtio_device() does not give up the last
reference to the virtio_device (e.g. because a virtio-scsi attached scsi
disk got removed without previously unmounting its previously mounted
partition).
To make sure that the genpool is only destroyed after all the necessary
freeing is done let us take a reference on the ccw device on each
ccw_device_dma_zalloc() and give it up on each ccw_device_dma_free().
Actually there are multiple approaches to fixing the problem at hand
that can work. The upside of this one is that it is the safest one while
remaining simple. We don't crash the guest even if the driver does not
pair allocations and frees. The downside is the reference counting
overhead, that the reference counting for ccw devices becomes more
complex, in a sense that we need to pair the calls to the aforementioned
functions for it to be correct, and that if we happen to leak, we leak
more than necessary (the whole ccw device instead of just the genpool).
Some alternatives to this approach are taking a reference in
virtio_ccw_online() and giving it up in virtio_ccw_release_dev() or
making sure virtio_ccw_release_dev() completes its work before
virtio_ccw_remove() returns. The downside of these approaches is that
these are less safe against programming errors.
Cc: <stable@vger.kernel.org> # v5.3
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48720ba568 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers")
Reported-by: bfu@redhat.com
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio.ko no longer needs to care about how the QAOBs are allocated,
from its perspective they are merely another parameter to do_QDIO().
So for a start, shift the cache into the only qdio driver that uses
QAOBs (ie. qeth). Here there's further opportunity to optimize its
usage in the future - eg. make it per-{device, TX queue}, or only
compile it when the driver is built with CQ/QAOB support.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cdev->online for the purge function must not be checked for the
non-IO subchannel type. Make sure that we are deriving the cdev only
from sch-type SUBCHANNEL_TYPE_IO.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The cio_ignore list is used to create and maintain the list of devices
which is to be ignored by Linux. During boot-time, this list is adjusted
and accommodate all the devices which are configured on the HMC
interface. Once these devices are accessible, they are then available to
Linux and set online.
cio_ignore purge function should align with this functionality. But
currently, the subchannel associated with the offline-devices are not
unregistered during purge. Add an explicit subchannel-unregister function
in the purge_fn callback.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently when removing a device from cio_ignore list, we trigger a
path-verification for all the subchannels available in the system. This
could lead to path-verification requests on subchannels with an online
device, which could cause unwanted delay. Instead of all the
subchannels, trigger the path-verifications to those without an online
device.
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 0b9902c1fc ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.
Fixes: b41b554c1e ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix topology update on cpu hotplug, so notifiers see expected masks. This bug
was uncovered with SCHED_CORE support.
- Fix stack unwinding so that the correct number of entries are omitted like
expected by common code. This fixes KCSAN selftests.
- Add kmemleak annotation to stack_alloc to avoid false positive kmemleak
warnings.
- Avoid layering violation in common I/O code and don't unregister subchannel
from child-drivers.
- Remove xpram device driver for which no real use case exists since the kernel
is 64 bit only. Also all hypervisors got required support removed in the
meantime, which means the xpram device driver is dead code.
- Fix -ENODEV handling of clp_get_state in our PCI code.
- Enable KFENCE in debug defconfig.
- Cleanup hugetlbfs s390 specific Kconfig dependency.
- Quite a lot of trivial fixes to get rid of "W=1" warnings, and and other
simple cleanups.
-----BEGIN PGP SIGNATURE-----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=fpJz
-----END PGP SIGNATURE-----
Merge tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"Except for the xpram device driver removal it is all about fixes and
cleanups.
- Fix topology update on cpu hotplug, so notifiers see expected
masks. This bug was uncovered with SCHED_CORE support.
- Fix stack unwinding so that the correct number of entries are
omitted like expected by common code. This fixes KCSAN selftests.
- Add kmemleak annotation to stack_alloc to avoid false positive
kmemleak warnings.
- Avoid layering violation in common I/O code and don't unregister
subchannel from child-drivers.
- Remove xpram device driver for which no real use case exists since
the kernel is 64 bit only. Also all hypervisors got required
support removed in the meantime, which means the xpram device
driver is dead code.
- Fix -ENODEV handling of clp_get_state in our PCI code.
- Enable KFENCE in debug defconfig.
- Cleanup hugetlbfs s390 specific Kconfig dependency.
- Quite a lot of trivial fixes to get rid of "W=1" warnings, and and
other simple cleanups"
* tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
hugetlbfs: s390 is always 64bit
s390/ftrace: remove incorrect __va usage
s390/zcrypt: remove incorrect kernel doc indicators
scsi: zfcp: fix kernel doc comments
s390/sclp: add __nonstring annotation
s390/hmcdrv_ftp: fix kernel doc comment
s390: remove xpram device driver
s390/pci: read clp_list_pci_req only once
s390/pci: fix clp_get_state() handling of -ENODEV
s390/cio: fix kernel doc comment
s390/ctrlchar: fix kernel doc comment
s390/con3270: use proper type for tasklet function
s390/cpum_cf: move array from header to C file
s390/mm: fix kernel doc comments
s390/topology: fix topology information when calling cpu hotplug notifiers
s390/unwind: use current_frame_address() to unwind current task
s390/configs: enable CONFIG_KFENCE in debug_defconfig
s390/entry: make oklabel within CHKSTG macro local
s390: add kmemleak annotation in stack_alloc()
s390/cio: dont unregister subchannel from child-drivers
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching
to support future vendor provided vfio-pci variants (Yishai Hadas,
Max Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first
open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy,
Yishai Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=nzK7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
The devices owned by the parent-driver (css) was getting unregistered
from the io-subchannel driver is clearly a layering violation.
Remove the subchannel unregistration from the child-drivers.
This also means, if the device connected to the subchannel is not
operational, or not accessible, the subchannel will not be unregistered.
Instead the CIO layer will allow valid subchannels without any operational
devices in sysfs. And the userspace tooling might need to be modified to
optimally handle this new situation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Neither of the two drivers provides any SLIB parameter data, so get rid
of the dead code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move all QIB-related code into qdio_setup_qib(), and slightly re-order
it according to the order of the struct's fields. This makes it easier
to understand what the QIB actually looks like before we send it to HW.
Also get rid of the qebsm_possible() helper - as 31-bit support is long
gone, the comment doesn't make any sense. And while removing some stale
QIB-related comment, also move the clearing of the QDR into its proper
place.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Prefer dev_info() over a raw printk. This also adds the device and
driver names into the output, so that we have:
Before:
qdio: 0.0.17c0 ZFCP on SC 17 using [...]
After:
zfcp 0.0.17c0: qdio: ZFCP on SC 17 using [...]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Push the sync check from qdio_inspect_queue() down into the two
get_*_buffer_frontier() code paths, where we actually need the sync to
look at the current queue state. This lets us avoid the check when we
know that there is no work on the queue (ie. when q->nr_buf_used is 0).
While at it introduce the qdio_sync_*_queue() helpers, so that we can
avoid the branch on q->is_input_q when we already know the queue type.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Don't bother with translating the SIGA-related capability bits into
our own internal format, just cache the full qdioac1 field instead.
Also adjust the helper macros so that they take a qdio_irq argument
and can be used everywhere, instead of taking a qdio_q and then
internally dereferencing the parent pointer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The queue processing is fully decoupled from any preceding interrupt,
so we're no longer making any use of the sync-after-IRQ HW capabilities.
And as SIGA-sync is a legacy feature, there's also not much point in
re-designing the driver & qdio-layer code just so that we can
potentially avoid a few syncs. So just remove all the leftover code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Clean up yet another path where HW wants an absolute address, and we've
been implicitly relying on V=R.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Linus Torvalds