The only user of tlb_flush_leaf is a particularly hairy corner of the
Arm short-descriptor code, which wants a synchronous invalidation to
minimise the races inherent in trying to split a large page mapping.
This is already far enough into "here be dragons" territory that no
sensible caller should ever hit it, and thus it really doesn't need
optimising. Although using tlb_flush_walk there may technically be
more heavyweight than needed, it does the job and saves everyone else
having to carry around useless baggage.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/9844ab0c5cb3da8b2f89c6c2da16941910702b41.1606324115.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the ARM page tables are always allocated by GFP_ATOMIC parameter,
but the iommu_ops->map() function has been added a gfp_t parameter by
commit 781ca2de89 ("iommu: Add gfp parameter to iommu_ops::map"),
thus io_pgtable_ops->map() should use the gfp parameter passed from
iommu_ops->map() to allocate page pages, which can avoid wasting the
memory allocators atomic pools for some non-atomic contexts.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/3093df4cb95497aaf713fca623ce4ecebb197c2e.1591930156.git.baolin.wang@linux.alibaba.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add an entry for r8a77961 in soc_rcar_gen3[] list so that we dont
enable iommu unconditionally.
Fixes: 17fe161816 ("iommu/renesas: Add support for r8a77961")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1594722055-9298-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
gcc warns because the only reference to ipmmu_find_group
is inside of an #ifdef:
drivers/iommu/ipmmu-vmsa.c:878:28: error: 'ipmmu_find_group' defined but not used [-Werror=unused-function]
Change the #ifdef to an equivalent IS_ENABLED().
Fixes: 6580c8a784 ("iommu/renesas: Convert to probe/release_device() call-backs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://lore.kernel.org/r/20200508220224.688985-1-arnd@arndb.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Renesas IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-28-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
TTBR1 values have so far been redundant since no users implement any
support for split address spaces. Crucially, though, one of the main
reasons for wanting to do so is to be able to manage each half entirely
independently, e.g. context-switching one set of mappings without
disturbing the other. Thus it seems unlikely that tying two tables
together in a single io_pgtable_cfg would ever be particularly desirable
or useful.
Streamline the configs to just a single conceptual TTBR value
representing the allocated table. This paves the way for future users to
support split address spaces by simply allocating a table and dealing
with the detailed TTBRn logistics themselves.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Drop change to ttbr value]
Signed-off-by: Will Deacon <will@kernel.org>
Since we will have changed memory mapping of the IPMMU in the future,
this patch adds a utlb_offset_base into struct ipmmu_features
for IMUCTR and IMUASID registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_utlb_reg() and
ipmmu_imu{asid,ctr}_write() for "uTLB" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
this patch uses ipmmu_features values instead of a macro to
calculate context registers offset. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_ctx_{reg,read,write}()
for MMU "context" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support different registers memory mapping hardware easily
in the future, this patch tidies up the register definitions
as below:
- Add comments to state to which SoCs or SoC families they apply
- Add categories about MMU "context" and uTLB registers
No change behavior.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support different registers memory mapping hardware easily
in the future, this patch removes all unused register
definitions.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Between VMSAv8-64 and the various 32-bit formats, there is either one
64-bit MAIR or a pair of 32-bit MAIR0/MAIR1 or NMRR/PMRR registers.
As such, keeping two 64-bit values in io_pgtable_cfg has always been
overkill.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As platform_get_irq() now prints an error when the interrupt does not
exist, calling it gratuitously causes scary messages like:
ipmmu-vmsa e6740000.mmu: IRQ index 0 not found
Fix this by moving the call to platform_get_irq() down, where the
existence of the interrupt is mandatory.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a gfp_t parameter to the iommu_ops::map function.
Remove the needless locking in the AMD iommu driver.
The iommu_ops::map function (or the iommu_map function which calls it)
was always supposed to be sleepable (according to Joerg's comment in
this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so
should probably have had a "might_sleep()" since it was written. However
currently the dma-iommu api can call iommu_map in an atomic context,
which it shouldn't do. This doesn't cause any problems because any iommu
driver which uses the dma-iommu api uses gfp_atomic in it's
iommu_ops::map function. But doing this wastes the memory allocators
atomic pools.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
According to the Hardware Manual Errata for Rev. 1.50 of April 10, 2019,
cache snoop transactions for page table walk requests are not supported
on R-Car Gen3.
Hence, this patch removes setting these fields in the IMTTBCR register,
since it will have no effect, and adds comments to the register bit
definitions, to make it clear they apply to R-Car Gen2 only.
Signed-off-by: Hai Nguyen Pham <hai.pham.ud@renesas.com>
[geert: Reword, add comments]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the recently added IMTTBCR_SL0_TWOBIT_* definitions up, to make
sure all IMTTBCR register bit definitions are sorted by decreasing bit
index. Add comments to make it clear that they exist on R-Car Gen3
only.
Fixes: c295f504fb ("iommu/ipmmu-vmsa: Allow two bit SL0")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update the io-pgtable ->unmap() function to take an iommu_iotlb_gather
pointer as an argument, and update the callers as appropriate.
Signed-off-by: Will Deacon <will@kernel.org>
The ->tlb_add_flush() callback in the io-pgtable API now looks a bit
silly:
- It takes a size and a granule, which are always the same
- It takes a 'bool leaf', which is always true
- It only ever flushes a single page
With that in mind, replace it with an optional ->tlb_add_page() callback
that drops the useless parameters.
Signed-off-by: Will Deacon <will@kernel.org>
Hook up ->tlb_flush_walk() and ->tlb_flush_leaf() in drivers using the
io-pgtable API so that we can start making use of them in the page-table
code. For now, they can just wrap the implementations of ->tlb_add_flush
and ->tlb_sync pending future optimisation in each driver.
Signed-off-by: Will Deacon <will@kernel.org>
To allow IOMMU drivers to batch up TLB flushing operations and postpone
them until ->iotlb_sync() is called, extend the prototypes for the
->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to
the current iommu_iotlb_gather structure.
All affected IOMMU drivers are updated, but there should be no
functional change since the extra parameter is ignored for now.
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for TLB flush gathering in the IOMMU API, rename the
iommu_gather_ops structure in io-pgtable to iommu_flush_ops, which
better describes its purpose and avoids the potential for confusion
between different levels of the API.
$ find linux/ -type f -name '*.[ch]' | xargs sed -i 's/gather_ops/flush_ops/g'
Signed-off-by: Will Deacon <will@kernel.org>
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just
an indication of whether or not the page-table walker for the IOMMU is
coherent with the CPU caches. Since cache coherency is more than just a
quirk, replace the flag with its own field in the io_pgtable_cfg
structure.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
During PSCI system suspend, R-Car Gen3 SoCs are powered down, and all
IPMMU state is lost. Hence after s2ram, devices wired behind an IPMMU,
and configured to use it, will see their DMA operations hang.
To fix this, restore all IPMMU contexts, and re-enable all active
micro-TLBs during system resume.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ipmmu_domain_init_context() takes care of (1) initializing the software
domain, and (2) initializing the hardware context for the domain.
Extract the code to initialize the hardware context into a new subroutine
ipmmu_domain_setup_context(), to prepare for later reuse.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The maximum number of micro-TLBs per IPMMU instance is not fixed, but
depends on the SoC type. Hence move it from struct ipmmu_vmsa_device to
struct ipmmu_features, and set up the correct value for both R-Car Gen2
and Gen3 SoCs.
Note that currently no code uses this value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make the IPMMU_CTX_MAX constant unsigned, to match the type of
ipmmu_features.number_of_contexts.
This allows to use plain min() instead of type-casting min_t().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On R-Car Gen3, the faulting virtual address is a 40-bit address, and
comprised of two registers. Read the upper address part, and combine
both parts, when running on a 64-bit system.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As of commit 7af9a5fdb9 ("iommu/ipmmu-vmsa: Use
iommu_device_sysfs_add()/remove()"), IOMMU devices show up under
/sys/class/iommu/, but their "devices" subdirectories are empty.
Likewise, devices tied to an IOMMU do not have an "iommu" backlink.
Make sure all links are created, on both arm32 and arm64.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move io-pgtable.h to include/linux/ and export alloc_io_pgtable_ops
and free_io_pgtable_ops. This enables drivers outside drivers/iommu/ to
use the page table library. Specifically, some ARM Mali GPUs use the
ARM page table formats.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config IPMMU_VMSA
drivers/iommu/Kconfig: bool "Renesas VMSA-compatible IPMMU"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid adding copy and pasted strcmp codes in the future,
this patch adds an array "rcar_gen3_slave_whitelist" to check
whether the device can work with the IPMMU or not.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some R-Car Gen3 SoCs has hardware restrictions on the IPMMU. So,
to check whether this R-Car Gen3 SoC can use the IPMMU correctly,
this patch modifies the ipmmu_slave_whitelist().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Yoshihiro Shimoda