Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb8 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
AER is not backed by a real request, hence we should not incorrectly
assume that when failing to send a nvme command, it is a normal request
but rather check if this is an aer and if so complete the aer (similar
to the normal completion path).
Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add NVMe request completion trace in nvme_complete_batch_req() because
nvme:nvme_complete_req tracepoint is missing in case of request batched
completion.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Controller deletion/reset, immediately followed by or concurrent with
a reconnect, is hard failing the connect attempt resulting in a
complete loss of connectivity to the controller.
In the connect request, fabrics looks for an existing controller with
the same address components and aborts the connect if a controller
already exists and the duplicate connect option isn't set. The match
routine filters out controllers that are dead or dying, so they don't
interfere with the new connect request.
When NVME_CTRL_DELETING_NOIO was added, it missed updating the state
filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this
new state, it's seen as a live controller and fails the connect request.
Correct by adding the DELETING_NIO state to the match checks.
Fixes: ecca390e80 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.
The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free
In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.
This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)
So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.
Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.
Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=k0IZ
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
If command prep fails, current handling will orphan subsequent requests
in the list. Consider a simple example:
rqlist = [ 1 -> 2 ]
When prep for request '1' fails, it will be appended to the
'requeue_list', leaving request '2' disconnected from the original
rqlist and no longer tracked. Meanwhile, rqlist is still pointing to the
failed request '1' and will attempt to submit the unprepped command.
Fix this by updating the rqlist accordingly using the request list
helper functions.
Fixes: d62cbcf62f ("nvme: add support for mq_ops->queue_rqs()")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220105170518.3181469-5-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the 'iopolicy' sysfs attribute can be set at runtime, most
storage arrays prefer to use the 'round-robin' iopolicy per default.
We can use udev rules to set this, but is getting rather unwieldy
for rebranded arrays as we would have to update the udev rules
anytime a new array shows up, leading to the same mess we currently
have in multipathd for configuring the RDAC arrays.
Hence this patch adds a module parameter 'iopolicy' to allow the
admin to switch the default, and to do away with the need for a
udev rule here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The variable 'ctrl' became useless since the code using it was dropped
from nvme_setup_cmd() in the commit 292ddf67bbd5 ("nvme: increment
request genctr on completion"). Fix it to get rid of this compilation
warning in the nvme-5.17 branch:
drivers/nvme/host/core.c: In function ‘nvme_setup_cmd’:
drivers/nvme/host/core.c:993:20: warning: unused variable ‘ctrl’ [-Wunused-variable]
struct nvme_ctrl *ctrl = nvme_req(req)->ctrl;
^~~~
Fixes: 292ddf67bbd5 ("nvme: increment request genctr on completion")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme request generation counter is intended to catch duplicate
completions. Incrementing the counter on submission means duplicates can
only be caught if the request tag is reallocated and dispatched prior to
the driver observing the corrupted CQE. Incrementing on completion
removes this window, making it possible to detect duplicate completions
in consecutive entries.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently applications have a hard time figuring out which
nvme-over-fabrics arguments are supported for any given kernel;
the ioctl will return an error code on failure, and the application
has to guess whether this was due to an invalid argument or due
to a connection or controller error.
With this patch applications can read a list of supported
arguments by simply reading from /dev/nvme-fabrics, allowing
them to validate the connection string.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This enables the block layer to send us a full plug list of requests
that need submitting. The block layer guarantees that they all belong
to the same queue, but we do have to check the hardware queue mapping
for each request.
If errors are encountered, leave them in the passed in list. Then the
block layer will handle them individually.
This is good for about a 4% improvement in peak performance, taking us
from 9.6M to 10M IOPS/core.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a nvme_prep_rq() helper to setup a command, and nvme_queue_rq() is
adapted to use this helper.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We'll need it for batched submit as well. Since we now have a copy
helper, get rid of the nvme_submit_cmd() wrapper.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A crash happens when trying to disconnect a reconnecting ctrl:
1) The network was cut off when the connection was just established,
scan work hang there waiting for some IOs complete. Those I/Os were
retried because we return BLK_STS_RESOURCE to blk in reconnecting.
2) After a while, I tried to disconnect this connection. This
procedure also hangs because it tried to obtain ctrl->scan_lock.
It should be noted that now we have switched the controller state
to NVME_CTRL_DELETING.
3) In nvme_check_ready(), we always return true when ctrl->state is
NVME_CTRL_DELETING, so those retrying I/Os were issued to the bottom
device which was already freed.
To fix this, when ctrl->state is NVME_CTRL_DELETING, issue cmd to bottom
device only when queue state is live. If not, return host path error to
the block layer
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Set ana_log_size to 0 when ana_log_buf is freed to make sure
nvme_mpath_init_identify will do the right thing when retrying
after an earlier failure.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The write pointer in NVMe ZNS is invalid for a zone in zone state full.
The same also holds true for ZAC/ZBC.
The current behavior for NVMe is to simply propagate the wp reported by
the drive, even for full zones. Since the wp is invalid for a full zone,
the wp reported by the drive may be any value.
The way that the sd_zbc driver handles a full zone is to always report
the wp as zone start + zone len, regardless of what the drive reported.
null_blk also follows this convention.
Do the same for NVMe, so that a BLKREPORTZONE ioctl reports the write
pointer for a full zone in a consistent way, regardless of the interface
of the underlying zoned block device.
blkzone report before patch:
start: 0x000040000, len 0x040000, cap 0x03e000, wptr 0xfffffffffffbfff8
reset:0 non-seq:0, zcond:14(fu) [type: 2(SEQ_WRITE_REQUIRED)]
blkzone report after patch:
start: 0x000040000, len 0x040000, cap 0x03e000, wptr 0x040000 reset:0
non-seq:0, zcond:14(fu) [type: 2(SEQ_WRITE_REQUIRED)]
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The only fabrics target that supports metadata handling through the
separate integrity buffer is RDMA. It is currently usable only if the
size is 8B per block and formatted for protection information. If an
rdma target were to export a namespace with a different format (ex:
4k+64B), the driver will not be able to submit valid read/write commands
for that namespace.
Suppress setting the metadata feature in the namespace so that the
gendisk capacity will be set to 0. This will prevent read/write access
through the block stack, but will continue to allow ioctl passthrough
commands.
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The driver assigned nvme handle isn't persistent across reboots, so is
not enough information to match up where the collisions are occuring.
Add the subsys nqn string to the output so that it can more easily be
identified later.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215099
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now. Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the disk attached to the request_queue instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Write Zeroes sets PRACT when block integrity is enabled (as it should),
but neglects to also set the reftag which is expected by reads. This
causes protection errors on reads.
Fix this by setting the reftag for type 1 and 2 (for type 3, reads will
not check the reftag).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This particular Kioxia device times out and aborts I/O during any load,
but it's more easily observable with discards (fstrim).
The device gets to a state that is also not possible to use
"nvme set-feature" to disable APST.
Booting with nvme_core.default_ps_max_latency=0 solves the issue.
We had a dozen or so of these devices behaving this same way in
customer environments.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Release the page frag cache when tearing down the io queues
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If maxh2cdata < r2t_length then driver will form multiple
H2CData PDUs, validate R2T PDU in nvme_tcp_handle_r2t() to
reuse nvme_tcp_setup_h2c_data_pdu().
Also set req->state to NVME_TCP_SEND_H2C_PDU in
nvme_tcp_setup_h2c_data_pdu().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=1GPi
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
NVMe uses one atomic flag to check if quiesce is needed. If quiesce is
started, the helper returns immediately. This way is wrong, since we
have to wait until quiesce is done.
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=HiWU
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- paride driver cleanups (Christoph)
- Remove cryptoloop support (Christoph)
- null_blk poll support (me)
- Now that add_disk() supports proper error handling, add it to various
drivers (Luis)
- Make ataflop actually work again (Michael)
- s390 dasd fixes (Stefan, Heiko)
- nbd fixes (Yu, Ye)
- Remove redundant wq flush in mtip32xx (Christophe)
- NVMe updates
- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)
- support the current discovery subsystem entry (Hannes Reinecke)
- use flex_array_size and struct_size (Len Baker)
- bcache fixes (Christoph, Coly, Chao, Lin, Qing)
- MD updates (Christoph, Guoqing, Xiao)
- Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)
* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
null_blk: Fix handling of submit_queues and poll_queues attributes
block: ataflop: Fix warning comparing pointer to 0
bcache: replace snprintf in show functions with sysfs_emit
bcache: move uapi header bcache.h to bcache code directory
nvmet: use flex_array_size and struct_size
nvmet: register discovery subsystem as 'current'
nvmet: switch check for subsystem type
nvme: add new discovery log page entry definitions
block: ataflop: more blk-mq refactoring fixes
block: remove support for cryptoloop and the xor transfer
mtd: add add_disk() error handling
rnbd: add error handling support for add_disk()
um/drivers/ubd_kern: add error handling support for add_disk()
m68k/emu/nfblock: add error handling support for add_disk()
xen-blkfront: add error handling support for add_disk()
bcache: add error handling support for add_disk()
dm: add add_disk() error handling
block: aoe: fixup coccinelle warnings
nvmet: use struct_size over open coded arithmetic
nvme: drop scan_lock and always kick requeue list when removing namespaces
...
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
In an effort to avoid open-coded arithmetic in the kernel [1], use the
flex_array_size() and struct_size() helpers instead of an open-coded
calculation.
[1] https://github.com/KSPP/linux/issues/160
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ddgst is of type __le32, &req->ddgst + req->offset
increases &req->ddgst by 4 * req->offset, fix this by
type casting &req->ddgst to u8 *.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With commit db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq
context") r2t and response PDU can get processed while send function
is executing.
Current data digest send code uses req->offset after kernel_sendmsg(),
this creates a race condition where req->offset gets reset before it
is used in send function.
This can happen in two cases -
1. Target sends r2t PDU which resets req->offset.
2. Target send response PDU which completes the req and then req is
used for a new command, nvme_tcp_setup_cmd_pdu() resets req->offset.
Fix this by storing req->offset in a local variable and using
this local variable after kernel_sendmsg().
Fixes: db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq context")
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We should not access request members after the last send, even to
determine if indeed it was the last data payload send. The reason is
that a completion could have arrived and trigger a new execution of the
request which overridden these members. This was fixed by commit
825619b09a ("nvme-tcp: fix possible use-after-completion").
Commit e371af033c broke that assumption again to address cases where
multiple r2t pdus are sent per request. To fix it, we need to record the
request data_sent and data_len and after the payload network send we
reference these counters to determine weather we should advance the
request iterator.
Fixes: e371af033c ("nvme-tcp: fix incorrect h2cdata pdu offset accounting")
Reported-by: Keith Busch <kbusch@kernel.org>
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When reading the partition table on initial scan hits an I/O error the
I/O will hang with the scan_mutex held:
[<0>] do_read_cache_page+0x49b/0x790
[<0>] read_part_sector+0x39/0xe0
[<0>] read_lba+0xf9/0x1d0
[<0>] efi_partition+0xf1/0x7f0
[<0>] bdev_disk_changed+0x1ee/0x550
[<0>] blkdev_get_whole+0x81/0x90
[<0>] blkdev_get_by_dev+0x128/0x2e0
[<0>] device_add_disk+0x377/0x3c0
[<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core]
[<0>] nvme_alloc_ns+0x417/0x950 [nvme_core]
[<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core]
[<0>] nvme_scan_work+0x168/0x310 [nvme_core]
[<0>] process_one_work+0x231/0x420
and trying to delete the controller will deadlock as it tries to grab
the scan mutex:
[<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core]
[<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core]
[<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core]
As we're now properly ordering the namespace list there is no need to
hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore.
And we always need to kick the requeue list as the path will be marked
as unusable and I/O will be requeued _without_ a current path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The host memory doorbell and event buffers need to be initialized on
each reset so the driver doesn't observe stale values from the previous
instantiation.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case that icdoff is not zero or mandatory keyed sgls are not
supported by the NVMe/RDMA target, we'll go to error flow but we'll
return 0 to the caller. Fix it by returning an appropriate error code.
Fixes: c66e2998c8 ("nvme-rdma: centralize controller setup sequence")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Since we now can tell for sure when a disk was added, move
setting the bit NVME_NSHEAD_DISK_LIVE only when we did
add the disk successfully.
Nothing to do here as the cleanup is done elsewhere. We take
care and use test_and_set_bit() because it is protects against
two nvme paths simultaneously calling device_add_disk() on the
same namespace head.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With discovery controllers supporting unique subsystem NQNs the
actual subsystem NQN might be different from that one passed in
via the connect args. So add a helper to display the resulting
subsystem NQN.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a connect option 'discovery' to specify that the connection
should be made to a discovery controller, not a normal I/O controller.
With discovery controllers supporting unique subsystem NQNs we
cannot easily distinguish by the subsystem NQN if this should be
a discovery connection, but we need this information to blank out
options not supported by discovery controllers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With unique discovery controller NQNs we cannot distinguish the
subsystem type by the NQN alone, but need to check the subsystem
type, too.
So expose the subsystem type in a new sysfs attribute 'subsystype'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Corrent limit of 1024 isn't valid for some of the RDMA based ctrls. In
case the target expose a cap of larger amount of entries (e.g. 1024),
the initiator may fail to create a QP with this size. Thus limit to a
value that works for all RDMA adapters.
Future general solution should use RDMA/core API to calculate this size
according to device capabilities and number of WRs needed per NVMe IO
request.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe FC don't have support for map queues, unlike the PCI, RDMA and TCP
transports. Add a ->map_queues callout for the LLDDs to provide such
functionality.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When fast_io_fail_tmo is set I/O will be aborted while recovery is
still ongoing. This causes MD to set the namespace to failed, and
no futher I/O will be submitted to that namespace.
However, once the recovery succeeds and the namespace becomes
operational again the NVMe subsystem doesn't send a notification,
so MD cannot automatically reinstate operation and requires
manual interaction.
This patch will send a KOBJ_CHANGE uevent per multipathed namespace
once the underlying controller transitions to LIVE, allowing an automatic
MD reassembly with these udev rules:
/etc/udev/rules.d/65-md-auto-re-add.rules:
SUBSYSTEM!="block", GOTO="md_end"
ACTION!="change", GOTO="md_end"
ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
PROGRAM="/sbin/md_raid_auto_readd.sh $devnode"
LABEL="md_end"
/sbin/md_raid_auto_readd.sh:
MDADM=/sbin/mdadm
DEVNAME=$1
export $(${MDADM} --examine --export ${DEVNAME})
if [ -z "${MD_UUID}" ]; then
exit 1
fi
UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID})
MD_DEVNAME=${UUID_LINK##*/}
export $(${MDADM} --detail --export /dev/${MD_DEVNAME})
if [ -z "${MD_METADATA}" ] ; then
exit 1
fi
if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then
echo "${MD_DEVNAME}: array not degraded, nothing to do"
exit 0
fi
MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state)
if [ ${MD_STATE} != "clean" ] ; then
echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add"
exit 1
fi
MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE"
if [ ${!MD_VARNAME} = "spare" ] ; then
${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME}
fi
Changes to v2:
- Add udev rules example to description
Changes to v1:
- use disk_uevent() as suggested by hch
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The current blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() always
stops and starts the queue unconditionally. And there can be concurrent
quiesce/unquiesce coming from different unrelated code paths, so
unquiesce may come unexpectedly and start queue too early.
Prepare for supporting concurrent quiesce/unquiesce from multiple
contexts, so that we can address the above issue.
NVMe has very complicated quiesce/unquiesce use pattern, add one atomic
bit for makeiing sure that blk-mq quiece/unquiesce is always called in
pair.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014081710.1871747-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig