The most significant changes at this cycle are the Sound Open Firmware
support from Intel for the common DSP framework along with its support
for Intel platforms. It's a door opened to a real "free" firmware (in
the sense of FOSS), and other parties show interests in it.
In addition to SOF, we've got a bunch of updates and fixes as usual.
Some highlights are below.
ALSA core:
- Cleanups and fixes in ALSA timer code to cover some races spotted
by syzkaller
- Cleanups and fixes in ALSA sequencer code to cover some races,
again unsurprisingly, spotted by syzkaller
- Optimize the common page allocation helper with alloc_pages_exact()
ASoC:
- Add SOF core support, as well as Intel SOF platform support
- Generic card driver improvements: support for MCLK/sample rate
ratio and pin switches
- A big set of improvements to TLV320AIC32x4 drivers
- New drivers for Freescale audio mixers, several Intel machines,
several Mediatek machines, Meson G12A, Spreadtrum compressed audio
and DMA devices
HD-audio:
- A few Realtek codec fixes for reducing pop noises
- Quirks for Chromebooks
- Workaround for faulty connection report on AMD/Nvidia HDMI
Others:
- A quirk for Focusrite Scarlett Solo USB-audio
- Add support for MOTU 8pre FireWire
- 24bit sample format support in aloop
- GUS patch format support (finally, over a decade) in native
emux synth code
-----BEGIN PGP SIGNATURE-----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=0tyg
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The most significant changes at this cycle are the Sound Open Firmware
support from Intel for the common DSP framework along with its support
for Intel platforms. It's a door opened to a real "free" firmware (in
the sense of FOSS), and other parties show interests in it.
In addition to SOF, we've got a bunch of updates and fixes as usual.
Some highlights are below.
ALSA core:
- Cleanups and fixes in ALSA timer code to cover some races spotted
by syzkaller
- Cleanups and fixes in ALSA sequencer code to cover some races,
again unsurprisingly, spotted by syzkaller
- Optimize the common page allocation helper with alloc_pages_exact()
ASoC:
- Add SOF core support, as well as Intel SOF platform support
- Generic card driver improvements: support for MCLK/sample rate
ratio and pin switches
- A big set of improvements to TLV320AIC32x4 drivers
- New drivers for Freescale audio mixers, several Intel machines,
several Mediatek machines, Meson G12A, Spreadtrum compressed audio
and DMA devices
HD-audio:
- A few Realtek codec fixes for reducing pop noises
- Quirks for Chromebooks
- Workaround for faulty connection report on AMD/Nvidia HDMI
Others:
- A quirk for Focusrite Scarlett Solo USB-audio
- Add support for MOTU 8pre FireWire
- 24bit sample format support in aloop
- GUS patch format support (finally, over a decade) in native emux
synth code"
* tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits)
ASoC: SOF: Fix unused variable warnings
ALSA: line6: toneport: Fix broken usage of timer for delayed execution
ALSA: aica: Fix a long-time build breakage
ALSA: hda/realtek - Support low power consumption for ALC256
ASoC: stm32: i2s: update pcm hardware constraints
ASoC: codec: hdac_hdmi: no checking monitor in hw_params
ASoC: mediatek: mt6358: save PGA for mixer control
ASoC: mediatek: mt6358: save output volume for mixer controls
ASoC: mediatek: mt6358: initialize setting when ramping volume
ASoC: SOF: core: fix undefined nocodec reference
ASoC: SOF: xtensa: fix undefined references
ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly
ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)
ALSA: hda/intel: add CometLake PCI IDs
ALSA: hda/realtek - Support low power consumption for ALC295
ASoC: rockchip: Fix an uninitialized variable compile warning
ASoC: SOF: Fix a compile warning with CONFIG_PCI=n
ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n
ASoC: sound/soc/sof/: fix kconfig dependency warning
ASoC: stm32: spdifrx: change trace level on iec control
...
The line6 toneport driver has code for some delayed initialization,
and this hits the kernel Oops because mutex and other sleepable
functions are used in the timer callback. Fix the abuse by a delayed
work instead so that everything works gracefully.
Reported-by: syzbot+a07d0142e74fdd595cfb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXNHNRQAKCRBiEGxRG/Sl
26r7AP0QapMWbN0YFvn5/TzIrkMBxz4ZXpWmCWtzpIkJRldAOAEAuhw8HgXPXZOQ
cn4VO+1zq5VBvJW+QqjqRXr0G6DaYAw=
=UVPc
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"LED core fixes and improvements:
- avoid races with workqueue
- Kconfig: pedantic cleanup
- small fixes for Flash class description
leds-lt3593:
- remove unneeded assignment in lt3593_led_probe
- drop pdata handling code
leds-blinkm:
- clean up double assignment to data->i2c_addr
leds-pca955x, leds-pca963x:
- revert ACPI support, as it turned out that there is no evidence
of officially registered ACPI IDs for these devices.
- make use of device property API
leds-as3645a:
- switch to fwnode property API
LED related addition to ACPI documentation:
- document how to refer to LEDs from remote nodes
LED related fix to ALSA line6/toneport driver:
- avoid polluting led_* namespace
And lm3532 driver relocation from MFD to LED subsystem, accompanied by
various improvements and optimizations; it entails also a change in
omap4-droid4-xt894.dts:
- leds: lm3532: Introduce the lm3532 LED driver
- mfd: ti-lmu: Remove LM3532 backlight driver references
- ARM: dts: omap4-droid4: Update backlight dt properties
- dt: lm3532: Add lm3532 dt doc and update ti_lmu doc"
* tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: avoid races with workqueue
ALSA: line6: Avoid polluting led_* namespace
leds: lm3532: Introduce the lm3532 LED driver
mfd: ti-lmu: Remove LM3532 backlight driver references
ARM: dts: omap4-droid4: Update backlight dt properties
dt: lm3532: Add lm3532 dt doc and update ti_lmu doc
leds: Small fixes for Flash class description
leds: blinkm: clean up double assignment to data->i2c_addr
leds: pca963x: Make use of device property API
leds: pca955x: Make use of device property API
leds: lt3593: Remove unneeded assignment in lt3593_led_probe
leds: lt3593: drop pdata handling code
leds: pca955x: Revert "Add ACPI support"
leds: pca963x: Revert "Add ACPI support"
drivers: leds: Kconfig: pedantic cleanups
ACPI: Document how to refer to LEDs from remote nodes
leds: as3645a: Switch to fwnode property API
The line6 driver uses a lot of USB buffers off of the stack, which is
not allowed on many systems, causing the driver to crash on some of
them. Fix this up by dynamically allocating the buffers with kmalloc()
which allows for proper DMA-able memory.
Reported-by: Christo Gouws <gouws.christo@gmail.com>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Christo Gouws <gouws.christo@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
led_colors clashes with the array of the same name being added
to the LED class. Do the following amendments to fix this issue
and the other prospective one.
led_colors -> toneport_led_colors
led_init_vals -> toneport_led_init_vals
Fixes: f44edd7b2b ("ALSA: line6/toneport: Implement LED controls via LED class")
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Pull the PCM suspend improvement / cleanup.
This moves the most of snd_pcm_suspend*() calls into PCM's own device
PM ops. There should be no change from the functionality POV.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of snd_pcm_suspend_all() & co became superfluous since we
call it in the PCM PM ops. Let's remove them.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fix checks if snd_card_register() fails, and if so logs the error
via dev_err() consistent with other patches.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The get_seconds() function is deprecated because it truncates the
timestamp to 32 bits, so all users should change to ktime_get_seconds()
or ktime_get_real_seconds().
The firmware interface for passing the timestamp is also limited to
32 bits, so this patch only has the cosmetic effect of avoiding the
old interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sending MIDI messages to a PODxt through the USB connection shows
"usb_submit_urb failed" in dmesg and the message is not received by
the POD.
The error is caused because in the funcion send_midi_async() in midi.c
there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt
USB descriptor shows that this endpoint it's an interrupt endpoint.
Patch tested with PODxt only.
[ The bug has been present from the very beginning in the staging
driver time, but Fixes below points to the commit moving to sound/
directory so that the fix can be cleanly applied -- tiwai ]
Fixes: 61864d844c ("ALSA: move line6 usb driver into sound/usb")
Signed-off-by: Fabián Inostroza <fabianinostroza@udec.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
=5KBY
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Back-merge for applying the timer API conversion patch for line6
driver that conflicts with the recent fix in upstream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pulling the EP validity checks in USB audio drivers.
It also adds a new helper in USB core, which was acked by Greg.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few other places calling usb_submit_urb() with the URB
composed from the fixed endpoint without validation. For avoiding the
spurious kernel warnings, add the sanity checks to appropriate
places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As syzkaller spotted, currently line6 drivers submit a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 24 at drivers/usb/core/urb.c:449
usb_submit_urb+0xf8a/0x11d0
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
line6_start_listen+0x55f/0x9e0 sound/usb/line6/driver.c:82
line6_init_cap_control sound/usb/line6/driver.c:690
line6_probe+0x7c9/0x1310 sound/usb/line6/driver.c:764
podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
....
This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While line6_probe() may kick off URB for a control MIDI endpoint, the
function doesn't clean up it properly at its error path. This results
in a leftover URB action that is eventually triggered later and causes
an Oops like:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619
RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76
Call Trace:
<IRQ>
line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326
__usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845
dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965
call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281
....
Since the whole clean-up procedure is done in line6_disconnect()
callback, we can simply call it in the error path instead of
open-coding the whole again. It'll fix such an issue automagically.
The bug was spotted by syzkaller.
Fixes: eedd0e95d3 ("ALSA: line6: Don't forget to call driver's destructor at error path")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When podhd_init() failed with the acquiring a ctrl i/f, the line6
helper still calls the disconnect callback that eventually calls again
usb_driver_release_interface() with the NULL intf.
Put the proper NULL check before calling it for avoiding an Oops.
Fixes: fc90172ba2 ("ALSA: line6: Claim pod x3 usb data interface")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error path in podhd_init() tries to clear the pending timer, while
the timer object is initialized at the end of init sequence, thus it
may hit the uninitialized object, as spotted by syzkaller:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted
4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
__lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237
podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299
line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783
podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
....
For addressing it, assure the initializations of timer and work by
moving them to the beginning of podhd_init().
Fixes: 790869dacc ("ALSA: line6: Add support for POD X3")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only passed to a const argument of the
function snd_pcm_set_ops in the file referencing them. Also, add const
to the declaration in the headers.
Structures found using Coccinelle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for the Line6 POD HD500X multi effect processor for playback
and capture (in/out audio) through USB.
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove Initialization from POD HD500X because it's not needed.
Every time the device is connected dmesg gives the following output:
"receive length failed (error -11)".
To solve this problem, another flags is introduced
(LINE6_CAP_CONTROL_INFO) and it is only used for PODX3 in: sysfs
entries, call podhd_startup_finalize(pod) and disconnection.
With this patch the error disappear.
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for the Line6 POD HD500X multi effect processor for
playback and capture (in/out audio) through USB.
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In kernel APIs of ALSA control interface, drivers can create a control
element set by a call of snd_ctl_new1() with a template. This template
is known to have const qualifier in general cases.
This commit adds the qualifier to template array, for safer program and
runtime. Application of this change moves the symbol from .data section
to .rodata section.
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_kcontrol_new strcutures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const too.
Done using Coccinelle:
@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};
@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)
@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p
@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While not all line6 devices currently support PCM, it causes no
harm to 'have it prepared'.
This also fixes toneport, which only has PCM - in which case
we previously skipped the USB transfer properties detection completely.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit f6a0dd107a.
The commit caused a regression on LINE6 Transport that has no control
caps. Although reverting the commit may result back in a spurious
error message for some device again, it's the simplest regression fix,
hence it's taken as is at first. The further code fix will follow
later.
Fixes: f6a0dd107a ("ALSA: line6: Only determine control port properties if needed")
Reported-by: Igor Zinovev <zinigor@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi,
we can constify the definitions.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Userspace apps have to claim USB interfaces before using endpoints in
them (drivers/usb/core/devio.c:checkintf()). It's a lock mechanism so
that two "drivers" don't steal data from each other. Kernel drivers don't
have to claim interfaces to work - but they should, to lock out userspace.
While there, fix line6_properties struct to match checkpatch.pl.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error checking here is messed up so we could end up dereferencing
-EFAULT.
Fixes: a16039cbf1 ('ALSA: line6: Add hwdep interface to access the POD control messages')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit c039aaa77a was incomplete,
missing part of the setup for Live. This makes also audio input work,
in addition to audio output.
Fixes: c039aaa77a
Reported-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, usb-line6 module exports an array of MIDI manufacturer ID and
usb-pod module uses it. However, the declaration is not the definition in
common header. The difference is explicit length of array. Although
compiler calculates it and everything goes well, it's better to use the
same representation between definition and declaration.
This commit fills the length of array for usb-line6 module. As a small
good sub-effect, this commit suppress below warnings from static analysis
by sparse v0.5.0.
sound/usb/line6/driver.c:274:43: error: cannot size expression
sound/usb/line6/driver.c:275:16: error: cannot size expression
sound/usb/line6/driver.c:276:16: error: cannot size expression
sound/usb/line6/driver.c:277:16: error: cannot size expression
Fixes: 705ececd1c ("Staging: add line6 usb driver")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/usb/line6/driver.c:484:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
CC: Andrej Krutak <dev@andree.sk>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We must do it this way, because e.g. POD X3 won't play any sound unless
the host listens on the bulk EP, so we cannot export it only via libusb.
The driver currently doesn't use the bulk EP messages in other way,
in future it could e.g. sense/modify volume(s).
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only initialize PCM for POD HD devices that support it.
No POD HD seems to support MIDI, thus drop the initialization.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This includes audio in/out and basic initialization via control EP (emulates
what original driver does). The initialization is done similarly to original
POD, firmware and serial IDs are read and exported via sysfs.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not all PODs use MIDI via USB data interface, thus allow avoiding
that code and instead using direct processing.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
POD X3 can initialize similarly to older PODs, but it doesn't have the MIDI
interface. Instead, configuration is done via proprietary bulk EP messages.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
E.g. POD X3 seems to require playback data to be sent to it to generate
capture data. Otherwise the device stalls and doesn't send any more capture
data until it's reset.
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Splits max_packet_size to max_packet_size_in/out (e.g. for
different channel counts).
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This has two parts:
* intervals_per_second setup
(high speed needs 8000, instead of 1000)
* iso_buffers setup (count of iso buffers depends on
USB speed, 2 is not enough for high speed)
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds