wbc_account_io() does a very specific job - try to see which cgroup is
actually dirtying an inode and transfer its ownership to the majority
dirtier if needed. The name is too generic and confusing. Let's
rename it to something more specific.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
btrfs is going to use css_put() and wbc helpers to improve cgroup
writeback support. Add dummy css_get() definition and export wbc
helpers to prepare for module and !CONFIG_CGROUP builds.
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, running into a shrink list that contains dentries from different
filesystems can cause several unpleasant things for shrink_dcache_parent()
and for umount(2).
The first problem is that there's a window during shrink_dentry_list() between
__dentry_kill() takes a victim out and dropping reference to its parent. During
that window the parent looks like a genuine busy dentry. shrink_dcache_parent()
(or, worse yet, shrink_dcache_for_umount()) coming at that time will see no
eviction candidates and no indication that it needs to wait for some
shrink_dentry_list() to proceed further.
That applies for any shrink list that might intersect with the subtree we are
trying to shrink; the only reason it does not blow on umount(2) in the mainline
is that we unregister the memory shrinker before hitting shrink_dcache_for_umount().
Another problem happens if something in a mixed-filesystem shrink list gets
be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for
the stuck shrinker to get around to our dentries.
Solution:
1) have shrink_dentry_list() decrement the parent's refcount and
make sure it's on a shrink list (ours unless it already had been on some
other) before calling __dentry_kill(). That eliminates the window when
shrink_dcache_parent() would've blown past the entire subtree without
noticing anything with zero refcount not on shrink lists.
2) when shrink_dcache_parent() has found no eviction candidates,
but some dentries are still sitting on shrink lists, rather than
repeating the scan in hope that shrinkers have progressed, scan looking
for something on shrink lists with zero refcount. If such a thing is
found, grab rcu_read_lock() and stop the scan, with caller locking
it for eviction, dropping out of RCU and doing __dentry_kill(), with
the same treatment for parent as shrink_dentry_list() would do.
Note that right now mixed-filesystem shrink lists do not occur, so this
is not a mainline bug. Howevere, there's a bunch of uses for such
beasts (e.g. the "try and evict everything we can out of given page"
patches; there are potential uses in mount-related code, considerably
simplifying the life in fs/namespace.c, etc.)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.
Two particular errors have been observed when extending a file:
1. The final extent is larger than it should be, having been rounded up
to a multiple of the block size.
B. The final extent is not shorter than it should be, due to not having
been updated when the file's information length was increased.
[JK: simplified udf_do_extend_final_block(), fixed up some types]
Fixes: 2c948b3f86 ("udf: Avoid IO in udf_clear_inode")
CC: stable@vger.kernel.org
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.com
Signed-off-by: Jan Kara <jack@suse.cz>
Fix sparse warning:
fs/nfsd/nfsctl.c:1221:22: warning:
symbol '__get_nfsdfs_client' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix sparse warnings:
fs/nfsd/nfs4state.c:1908:6: warning: symbol 'drop_client' was not declared. Should it be static?
fs/nfsd/nfs4state.c:2518:6: warning: symbol 'force_expire_client' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is done through IORING_OP_RECVMSG. This opcode uses the same
sqe->msg_flags that IORING_OP_SENDMSG added, and we pass in the
msghdr struct in the sqe->addr field as well.
We use MSG_DONTWAIT to force an inline fast path if recvmsg() doesn't
block, and punt to async execution if it would have.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is done through IORING_OP_SENDMSG. There's a new sqe->msg_flags
for the flags argument, and the msghdr struct is passed in the
sqe->addr field.
We use MSG_DONTWAIT to force an inline fast path if sendmsg() doesn't
block, and punt to async execution if it would have.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull x865 kdump updates from Thomas Gleixner:
"Yet more kexec/kdump updates:
- Properly support kexec when AMD's memory encryption (SME) is
enabled
- Pass reserved e820 ranges to the kexec kernel so both PCI and SME
can work"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active
x86/kexec: Set the C-bit in the identity map page table when SEV is active
x86/kexec: Do not map kexec area as decrypted when SEV is active
x86/crash: Add e820 reserved ranges to kdump kernel's e820 table
x86/mm: Rework ioremap resource mapping determination
x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED
x86/mm: Create a workarea in the kernel for SME early encryption
x86/mm: Identify the end of the kernel area to be reserved
Pull perf updates from Ingo Molnar:
"The main changes in this cycle on the kernel side were:
- CPU PMU and uncore driver updates to Intel Snow Ridge, IceLake,
KabyLake, AmberLake and WhiskeyLake CPUs.
- Rework the MSR probing infrastructure to make it more robust, make
it work better on virtualized systems and to better expose it on
sysfs.
- Rework PMU attributes group support based on the feedback from
Greg. The core sysfs patch that adds sysfs_update_groups() was
acked by Greg.
There's a lot of perf tooling changes as well, all around the place:
- vendor updates to Intel, cs-etm (ARM), ARM64, s390,
- various enhancements to Intel PT tooling support:
- Improve CBR (Core to Bus Ratio) packets support.
- Export power and ptwrite events to sqlite and postgresql.
- Add support for decoding PEBS via PT packets.
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically
- Allow using time ranges
- lots of updates to perf pmu, perf stat, perf trace, eBPF support,
perf record, perf diff, etc. - please see the shortlog and Git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (252 commits)
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools build: Check if gettid() is available before providing helper
perf jvmti: Address gcc string overflow warning for strncpy()
perf python: Remove -fstack-protector-strong if clang doesn't have it
perf annotate TUI browser: Do not use member from variable within its own initialization
perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64
perf evsel: Do not rely on errno values for precise_ip fallback
perf thread: Allow references to thread objects after machine__exit()
perf header: Assign proper ff->ph in perf_event__synthesize_features()
tools arch kvm: Sync kvm headers with the kernel sources
perf script: Allow specifying the files to process guest samples
perf tools metric: Don't include duration_time in group
perf list: Avoid extra : for --raw metrics
perf vendor events intel: Metric fixes for SKX/CLX
perf tools: Fix typos / broken sentences
perf jevents: Add support for Hisi hip08 L3C PMU aliasing
perf jevents: Add support for Hisi hip08 HHA PMU aliasing
perf jevents: Add support for Hisi hip08 DDRC PMU aliasing
perf pmu: Support more complex PMU event aliasing
perf diff: Documentation -c cycles option
...
-----BEGIN PGP SIGNATURE-----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=VSYT
-----END PGP SIGNATURE-----
Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"This is the main block updates for 5.3. Nothing earth shattering or
major in here, just fixes, additions, and improvements all over the
map. This contains:
- Series of documentation fixes (Bart)
- Optimization of the blk-mq ctx get/put (Bart)
- null_blk removal race condition fix (Bob)
- req/bio_op() cleanups (Chaitanya)
- Series cleaning up the segment accounting, and request/bio mapping
(Christoph)
- Series cleaning up the page getting/putting for bios (Christoph)
- block cgroup cleanups and moving it to where it is used (Christoph)
- block cgroup fixes (Tejun)
- Series of fixes and improvements to bcache, most notably a write
deadlock fix (Coly)
- blk-iolatency STS_AGAIN and accounting fixes (Dennis)
- Series of improvements and fixes to BFQ (Douglas, Paolo)
- debugfs_create() return value check removal for drbd (Greg)
- Use struct_size(), where appropriate (Gustavo)
- Two lighnvm fixes (Heiner, Geert)
- MD fixes, including a read balance and corruption fix (Guoqing,
Marcos, Xiao, Yufen)
- block opal shadow mbr additions (Jonas, Revanth)
- sbitmap compare-and-exhange improvemnts (Pavel)
- Fix for potential bio->bi_size overflow (Ming)
- NVMe pull requests:
- improved PCIe suspent support (Keith Busch)
- error injection support for the admin queue (Akinobu Mita)
- Fibre Channel discovery improvements (James Smart)
- tracing improvements including nvmetc tracing support (Minwoo Im)
- misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya
Kulkarni)"
- Various little fixes and improvements to drivers and core"
* tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits)
blk-iolatency: fix STS_AGAIN handling
block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES
blk-mq: simplify blk_mq_make_request()
blk-mq: remove blk_mq_put_ctx()
sbitmap: Replace cmpxchg with xchg
block: fix .bi_size overflow
block: sed-opal: check size of shadow mbr
block: sed-opal: ioctl for writing to shadow mbr
block: sed-opal: add ioctl for done-mark of shadow mbr
block: never take page references for ITER_BVEC
direct-io: use bio_release_pages in dio_bio_complete
block_dev: use bio_release_pages in bio_unmap_user
block_dev: use bio_release_pages in blkdev_bio_end_io
iomap: use bio_release_pages in iomap_dio_bio_end_io
block: use bio_release_pages in bio_map_user_iov
block: use bio_release_pages in bio_unmap_user
block: optionally mark pages dirty in bio_release_pages
block: move the BIO_NO_PAGE_REF check into bio_release_pages
block: skd_main.c: Remove call to memset after dma_alloc_coherent
block: mtip32xx: Remove call to memset after dma_alloc_coherent
...
There's a subtle unit conversion error when we increment the INUMBERS
cursor at the end of xfs_inumbers_walk. If there's an inode chunk at
the very end of the AG /and/ the AG size is a perfect power of two, the
startino of that last chunk (which is in units of AG inodes) will be 63
less than (1 << agino_log). If we add XFS_INODES_PER_CHUNK to the
startino, we end up with a startino that's larger than (1 << agino_log)
and when we convert that back to fs inode units we'll rip off that upper
bit and wind up back at the start of the AG.
Fix this by converting to units of fs inodes before adding
XFS_INODES_PER_CHUNK so that we'll harmlessly end up pointing to the
next AG.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When triggering an nfs_xdr_status trace point, record the task ID
and XID of the failing RPC to better pinpoint the problem.
This feels like a bit of a layering violation.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add missing symbolic flag names and display flags variables in
hexadecimal to improve observability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For improved readability, add nfs_show_status() call-sites in the
generic NFS trace points so that the symbolic status code name is
displayed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed that NFS status values stopped working again.
trace_print_symbols_seq() takes an unsigned long. Passing a negative
errno or negative NFSERR value just confuses it, and since we're
using C macros here and not static inline functions, all bets are
off due to implicit type conversion.
Straight-line the calling conventions so that error codes are stored
in the trace record as positive values in an unsigned long field,
mapped to symbolic as an unsigned long, and displayed as a negative
value, to continue to enable grepping on "error=-".
It's often the case that an error value that is positive is a byte
count but when it's negative, it's an error (e.g. nfs4_write). Fix
those cases so that the value that is eventually stored in the
error field is a positive NFS status or errno, or zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
The pstore_mkfile() function is passed a pointer to a struct
pstore_record. On success it consumes this 'record' pointer and
references it from the created inode.
On failure, however, it may or may not free the record. There are even
two different code paths which return -ENOMEM -- one of which does and
the other doesn't free the record.
Make the behaviour deterministic by never consuming and freeing the
record when returning failure, allowing the caller to do the cleanup
consistently.
Signed-off-by: Norbert Manthey <nmanthey@amazon.de>
Link: https://lore.kernel.org/r/1562331960-26198-1-git-send-email-nmanthey@amazon.de
Fixes: 83f70f0769 ("pstore: Do not duplicate record metadata")
Fixes: 1dfff7dd67 ("pstore: Pass record contents instead of copying")
Cc: stable@vger.kernel.org
[kees: also move "private" allocation location, rename inode cleanup label]
Signed-off-by: Kees Cook <keescook@chromium.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
When you try to run an upstream kernel on an old ARM-based Chromebook
you'll find that console-ramoops doesn't work.
Old ARM-based Chromebooks, before <https://crrev.com/c/439792>
("ramoops: support upstream {console,pmsg,ftrace}-size properties")
used to create a "ramoops" node at the top level that looked like:
/ {
ramoops {
compatible = "ramoops";
reg = <...>;
record-size = <...>;
dump-oops;
};
};
...and these Chromebooks assumed that the downstream kernel would make
console_size / pmsg_size match the record size. The above ramoops
node was added by the firmware so it's not easy to make any changes.
Let's match the expected behavior, but only for those using the old
backward-compatible way of working where ramoops is right under the
root node.
NOTE: if there are some out-of-tree devices that had ramoops at the
top level, left everything but the record size as 0, and somehow
doesn't want this behavior, we can try to add more conditions here.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
Probable cut&paste typo - use the correct field size.
(Not currently a practical problem since these two fields have the same
size, but we should fix it anyway.)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
-----BEGIN PGP SIGNATURE-----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=Push
-----END PGP SIGNATURE-----
Merge tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
Pull x86 AVX512 status update from Ingo Molnar:
"This adds a new ABI that the main scheduler probably doesn't want to
deal with but HPC job schedulers might want to use: the
AVX512_elapsed_ms field in the new /proc/<pid>/arch_status task status
file, which allows the user-space job scheduler to cluster such tasks,
to avoid turbo frequency drops"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/filesystems/proc.txt: Add arch_status file
x86/process: Add AVX-512 usage elapsed time to /proc/pid/arch_status
proc: Add /proc/<pid>/arch_status
Pull scheduler updates from Ingo Molnar:
- Remove the unused per rq load array and all its infrastructure, by
Dietmar Eggemann.
- Add utilization clamping support by Patrick Bellasi. This is a
refinement of the energy aware scheduling framework with support for
boosting of interactive and capping of background workloads: to make
sure critical GUI threads get maximum frequency ASAP, and to make
sure background processing doesn't unnecessarily move to cpufreq
governor to higher frequencies and less energy efficient CPU modes.
- Add the bare minimum of tracepoints required for LISA EAS regression
testing, by Qais Yousef - which allows automated testing of various
power management features, including energy aware scheduling.
- Restructure the former tsk_nr_cpus_allowed() facility that the -rt
kernel used to modify the scheduler's CPU affinity logic such as
migrate_disable() - introduce the task->cpus_ptr value instead of
taking the address of &task->cpus_allowed directly - by Sebastian
Andrzej Siewior.
- Misc optimizations, fixes, cleanups and small enhancements - see the
Git log for details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/uclamp: Add uclamp support to energy_compute()
sched/uclamp: Add uclamp_util_with()
sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks
sched/uclamp: Set default clamps for RT tasks
sched/uclamp: Reset uclamp values on RESET_ON_FORK
sched/uclamp: Extend sched_setattr() to support utilization clamping
sched/core: Allow sched_setattr() to use the current policy
sched/uclamp: Add system default clamps
sched/uclamp: Enforce last task's UCLAMP_MAX
sched/uclamp: Add bucket local max tracking
sched/uclamp: Add CPU's clamp buckets refcounting
sched/fair: Rename weighted_cpuload() to cpu_runnable_load()
sched/debug: Export the newly added tracepoints
sched/debug: Add sched_overutilized tracepoint
sched/debug: Add new tracepoint to track PELT at se level
sched/debug: Add new tracepoints to track PELT at rq level
sched/debug: Add a new sched_trace_*() helper functions
sched/autogroup: Make autogroup_path() always available
sched/wait: Deduplicate code with do-while
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle are:
- rwsem scalability improvements, phase #2, by Waiman Long, which are
rather impressive:
"On a 2-socket 40-core 80-thread Skylake system with 40 reader
and writer locking threads, the min/mean/max locking operations
done in a 5-second testing window before the patchset were:
40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810
40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255
After the patchset, they became:
40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741
40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098"
There's a lot of changes to the locking implementation that makes
it similar to qrwlock, including owner handoff for more fair
locking.
Another microbenchmark shows how across the spectrum the
improvements are:
"With a locking microbenchmark running on 5.1 based kernel, the
total locking rates (in kops/s) on a 2-socket Skylake system
with equal numbers of readers and writers (mixed) before and
after this patchset were:
# of Threads Before Patch After Patch
------------ ------------ -----------
2 2,618 4,193
4 1,202 3,726
8 802 3,622
16 729 3,359
32 319 2,826
64 102 2,744"
The changes are extensive and the patch-set has been through
several iterations addressing various locking workloads. There
might be more regressions, but unless they are pathological I
believe we want to use this new implementation as the baseline
going forward.
- jump-label optimizations by Daniel Bristot de Oliveira: the primary
motivation was to remove IPI disturbance of isolated RT-workload
CPUs, which resulted in the implementation of batched jump-label
updates. Beyond the improvement of the real-time characteristics
kernel, in one test this patchset improved static key update
overhead from 57 msecs to just 1.4 msecs - which is a nice speedup
as well.
- atomic64_t cross-arch type cleanups by Mark Rutland: over the last
~10 years of atomic64_t existence the various types used by the
APIs only had to be self-consistent within each architecture -
which means they became wildly inconsistent across architectures.
Mark puts and end to this by reworking all the atomic64
implementations to use 's64' as the base type for atomic64_t, and
to ensure that this type is consistently used for parameters and
return values in the API, avoiding further problems in this area.
- A large set of small improvements to lockdep by Yuyang Du: type
cleanups, output cleanups, function return type and othr cleanups
all around the place.
- A set of percpu ops cleanups and fixes by Peter Zijlstra.
- Misc other changes - please see the Git log for more details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
locking/lockdep: increase size of counters for lockdep statistics
locking/atomics: Use sed(1) instead of non-standard head(1) option
locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING
x86/jump_label: Make tp_vec_nr static
x86/percpu: Optimize raw_cpu_xchg()
x86/percpu, sched/fair: Avoid local_clock()
x86/percpu, x86/irq: Relax {set,get}_irq_regs()
x86/percpu: Relax smp_processor_id()
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
locking/rwsem: Guard against making count negative
locking/rwsem: Adaptive disabling of reader optimistic spinning
locking/rwsem: Enable time-based spinning on reader-owned rwsem
locking/rwsem: Make rwsem->owner an atomic_long_t
locking/rwsem: Enable readers spinning on writer
locking/rwsem: Clarify usage of owner's nonspinaable bit
locking/rwsem: Wake up almost all readers in wait queue
locking/rwsem: More optimal RT task handling of null owner
locking/rwsem: Always release wait_lock before waking up tasks
locking/rwsem: Implement lock handoff to prevent lock starvation
locking/rwsem: Make rwsem_spin_on_owner() return owner state
...
If an orphan has child orphans (xattrs), and due
to a commit the parent orpahn cannot get free()'ed immediately,
put also all child orphans on the erase list.
Otherwise UBIFS will free() them only upon unmount and we
waste memory.
Fixes: 988bec4131 ("ubifs: orphan: Handle xattrs like files")
Signed-off-by: Richard Weinberger <richard@nod.at>
O_TMPFILE files can change their link count back to non-zero.
This corner case needs to get addressed in the orphans subsystem
too.
Fixes: 474b93704f ("ubifs: Implement O_TMPFILE")
Reported-by: Lars Persson <lists@bofh.nu>
Signed-off-by: Richard Weinberger <richard@nod.at>
zstd shows a good compression rate and is faster than lzo,
also on slow ARM cores.
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Michele Dionisio <michele.dionisio@gmail.com>
[rw: rewrote commit message]
Signed-off-by: Richard Weinberger <richard@nod.at>
HMACs can only be generated on the system the UBIFS image is running on.
To support offline signed images we add a PKCS#7 signature to the UBIFS
image which can be created by mkfs.ubifs.
Both the master node and the superblock need to be authenticated, during
normal runtime both are protected with HMACs. For offline signature
support however only a single signature is desired. We add a signature
covering the superblock node directly behind it. To protect the master
node a hash of the master node is added to the superblock which is used
when the master node doesn't contain a HMAC.
Transition to a read/write filesystem is also supported. During
transition first the master node is rewritten with a HMAC (implicitly,
it is written anyway as the FS is marked dirty). Afterwards the
superblock is rewritten with a HMAC. Once after the image has been
mounted read/write it is HMAC only, the signature is no longer required
or even present on the filesystem.
In an offline signed image the master node is authenticated by the
superblock. In a transition to r/w we have to make sure that the master
node is rewritten before the superblock node. In this case the master
node gets a HMAC and its authenticity no longer depends on the
superblock node. There are some cases in which the current code first
writes the superblock node though, so with this patch writing of the
superblock node is delayed until the master node is written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
In ubifs_log_start_commit, the value of c->lhead_offs is zero or set
to zero by code bellow.
/* Switch to the next log LEB */
if (c->lhead_offs) {
c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum);
ubifs_assert(c->lhead_lnum != c->ltail_lnum);
c->lhead_offs = 0;
}
The value of 'len' can not exceed 'max_len' which assigned value by
code bellow.
max_len = UBIFS_CS_NODE_SZ + c->jhead_cnt * UBIFS_REF_NODE_SZ;
The value of c->lhead_offs changed by code bellow and cannot exceed
'max_len'.
c->lhead_offs += len;
if (c->lhead_offs == c->leb_size) {
c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum);
c->lhead_offs = 0;
}
Usually, the size of PEB is between 64KB and 256KB. So the value of
c->lhead_offs is far less than c->leb_size. The check
'if (c->lhead_offs == c->leb_size)' could never to be true.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
"Not a CS node" makes more sense than "Node a CS node".
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
cbuf's size can be simply assigned.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Commit c877154d30 fixed an uninitialized variable and optimized
the function to not call tnc_next() in the first iteration of the
loop. While this seemed perfectly legit and wise, it turned out to
be illegal.
If the lookup function does not find an exact match it will rewind
the cursor by 1.
The rewinded cursor will not match the name hash we are looking for
and this results in a spurious -ENOENT.
So we need to move to the next entry in case of an non-exact match,
but not if the match was exact.
While we are here, update the documentation to avoid further confusion.
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c877154d30 ("ubifs: Fix uninitialized variable in search_dh_cookie()")
Fixes: 781f675e2d ("ubifs: Fix unlink code wrt. double hash lookups")
Signed-off-by: Richard Weinberger <richard@nod.at>
Commit e450f4d1a5 ("ceph: pass inclusive lend parameter to
filemap_write_and_wait_range()") fixed the end offset parameter used to
call filemap_write_and_wait_range and invalidate_inode_pages2_range.
Unfortunately it missed truncate_inode_pages_range, introducing a
regression that is easily detected by xfstest generic/130.
The problem is that when doing direct IO it is possible that an extra page
is truncated from the page cache when the end offset is page aligned.
This can cause data loss if that page hasn't been sync'ed to the OSDs.
While there, change code to use PAGE_ALIGN macro instead.
Cc: stable@vger.kernel.org
Fixes: e450f4d1a5 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_drop_inode() implementation is not any different from the generic
function, thus there's no point in keeping it around.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Having granularity set to 1us results in having inode timestamps with a
accurancy different from the fuse client (i.e. atime, ctime and mtime will
always end with '000'). This patch normalizes this behaviour and sets the
granularity to 1.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This list item remained from when we had safe and unsafe replies
(commit vs ack). It has since become a private list item for use by
clients.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The convention with xattrs is to not store the termination with string
data, given that it returns the length. This is how setfattr/getfattr
operate.
Most of ceph's virtual xattr routines use snprintf to plop the string
directly into the destination buffer, but snprintf always NULL
terminates the string. This means that if we send the kernel a buffer
that is the exact length needed to hold the string, it'll end up
truncated.
Add a ceph_fmt_xattr helper function to format the string into an
on-stack buffer that should always be large enough to hold the whole
thing and then memcpy the result into the destination buffer. If it does
turn out that the formatted string won't fit in the on-stack buffer,
then return -E2BIG and do a WARN_ONCE().
Change over most of the virtual xattr routines to use the new helper. A
couple of the xattrs are sourced from strings however, and it's
difficult to know how long they'll be. Just have those memcpy the result
in place after verifying the length.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The getxattr manpage states that we should return ERANGE if the
destination buffer size is too small to hold the value.
ceph_vxattrcb_layout does this internally, but we should be doing
this for all vxattrs.
Fix the only caller of getxattr_cb to check the returned size
against the buffer length and return -ERANGE if it doesn't fit.
Drop the same check in ceph_vxattrcb_layout and just rely on the
caller to handle it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The getxattr_cb functions return size_t, which is unsigned and then
cast that value to int and then ssize_t before returning it. While all
of this works, it relies on implicit casting rules for signed/unsigned
conversions.
Change getxattr_cb to return ssize_t to better conform with what the
caller actually wants. Also, remove some suspicious casts.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Client uses this flag to tell mds if there is more cap snap need to
flush. It's mainly for the case that client needs to re-send cap/snap
flushes after mds failover, but CEPH_CAP_ANY_FILE_WR on corresponding
inodes are all released before mds failover.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We don't set SB_I_VERSION on ceph since we need to manage it ourselves,
so we must increment it whenever we update the file times.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
handle_cap_export() may add placeholder caps to session that is in
opening state. These caps' session pointer become wild after session get
unregistered.
The fix is not to unregister session in opening state during mds failovers,
just let client to reconnect later when mds is recovered.
Link: https://tracker.ceph.com/issues/40190
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
get_quota_realm() enters infinite loop if quota inode has no caps.
This can happen after client gets evicted.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When creating new file/directory, use security_dentry_init_security() to
prepare selinux context for the new inode, then send openc/mkdir request
to MDS, together with selinux xattr.
security_dentry_init_security() only supports single security module and
only selinux has dentry_init_security hook. So only selinux is supported
for now. We can add support for other security modules once kernel has a
generic version of dentry_init_security()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Also rename ceph_release_acls_info() to ceph_release_acl_sec_ctx().
And move their definitions to different files. This is preparation
for security label support.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
change1: fix below warning reported by coccicheck
/fs/ceph/export.c:371:33-39: WARNING: PTR_ERR_OR_ZERO can be used
change2: typecasted PTR_ERR_OR_ZERO to long as dout expecting long
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should call __ceph_dentry_dir_lease_touch() under dentry->d_lock.
Besides, ceph_dentry(dentry) can be NULL when called by LOOKUP_RCU
d_revalidate()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
d_name_cmp() and update_dentry_lease() lock and unlock dentry->d_lock
respectively. Dentry may get renamed between them. The fix is moving
the dentry name compare into update_dentry_lease().
This patch introduce two version of update_dentry_lease(). One version
is for the case that parent inode is locked. It does not need to check
parent/target inode and dentry name. Another version is for the case
that parent inode is not locked. It checks parent/target inode and
dentry name after locking dentry->d_lock.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic64_set() primitive.
Replace the barrier with an smp_mb().
Fixes: fdd4e15838 ("ceph: rework dcache readdir")
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The vxattr value incorrectly places a "09" prefix to the nanoseconds
field, instead of providing it as a zero-pad width specifier after '%'.
Fixes: 3489b42a72 ("ceph: fix three bugs, two in ceph_vxattrcb_file_layout()")
Link: https://tracker.ceph.com/issues/39943
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_listxattr() now calculates the length of vxattrs dynamically, so
these helpers, which incorrectly ignore vxattr.exists_cb(), can be
removed.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_listxattr() incorrectly returns a length based on the static
ceph_vxattrs_name_size() value, which only takes into account whether
vxattrs are hidden, ignoring vxattr.exists_cb().
When filling the xattr buffer ceph_listxattr() checks VXATTR_FLAG_HIDDEN
and vxattr.exists_cb(). If both are false, we return an incorrect
(oversize) length.
Fix this behaviour by always calculating the vxattrs length at runtime,
taking both vxattr.hidden and vxattr.exists_cb() into account.
This bug is only exposed with the new "ceph.snap.btime" vxattr, as all
other vxattrs with a non-null exists_cb also carry VXATTR_FLAG_HIDDEN.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
MDS InodeStat v3 wire structures include a trailing snapshot creation
time member. Unmarshall this and retain it for a future vxattr.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
.name_size should use the same string as .name.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The problem is that if ceph_mdsc_build_path() fails then we set "path"
to NULL and the "pathlen" variable is uninitialized. Then we call
ceph_mdsc_free_path(path, pathlen) to clean up. Since "path" is NULL,
the function is a no-op but Smatch and UBSan still complain that
"pathlen" is uninitialized.
This patch doesn't change run time, it just silence the warnings.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When a file/directory is already present in debugfs, and it is attempted
to be created again, be more specific about what file/directory is being
created and where it is trying to be created to give a bit more help to
developers to figure out the problem.
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20190706154256.GA2683@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will be helpful as we improve handling of special file types.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can cut the number of roundtrips on open (may also
help some rename cases as well) by returning the inode
number in the SMB2 open request itself instead of
querying it afterwards via a query FILE_INTERNAL_INFO.
This should significantly improve the performance of
posix open.
Add SMB2_CREATE_QUERY_ON_DISK_ID create context request
on open calls so that when server supports this we
can save a roundtrip for QUERY_INFO on every open.
Follow on patch will add the response processing for
SMB2_CREATE_QUERY_ON_DISK_ID context and optimize
smb2_open_file to avoid the extra network roundtrip
on every posix open. This patch adds the context on
SMB2/SMB3 open requests.
Signed-off-by: Steve French <stfrench@microsoft.com>
Since in theory a server could respond with compressed read
responses even if not requested on read request (assuming that
a compression negcontext is sent in negotiate protocol) - do
not send compression information during negotiate protocol
unless the user asks for compression explicitly (compression
is experimental), and add a mount warning that compression
is experimental.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is a special ACE used by some servers to allow the mode
bits to be stored. This can be especially helpful in scenarios
in which the client is trusted, and access checking on the
client vs the POSIX mode bits is sufficient.
Add mount option to allow enabling this behavior.
Follow on patch will add support for chmod and queryinfo
(stat) by retrieving the POSIX mode bits from the special
ACE, SID: S-1-5-88-3
See e.g.
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The 'NFS' style symlinks (see MS-FSCC 2.1.2.4) were not
being queried properly in query_symlink. Fix this.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is a race condition with how we send (or supress and don't send)
smb echos that will cause the client to incorrectly think the
server is unresponsive and thus needs to be reconnected.
Summary of the race condition:
1) Daisy chaining scheduling creates a gap.
2) If traffic comes unfortunate shortly after
the last echo, the planned echo is suppressed.
3) Due to the gap, the next echo transmission is delayed
until after the timeout, which is set hard to twice
the echo interval.
This is fixed by changing the timeouts from 2 to three times the echo interval.
Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
not just if CONFIG_CIFS_DEBUG2 is enabled.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change return from int to void of convert_ace_to_cifs_ace as it never
fails.
fixes below issue reported by coccicheck
fs/cifs/cifssmb.c:3606:7-9: Unneeded variable: "rc". Return "0" on line
3620
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Field ia_valid is being debugged with the field name iavalid, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Trivial cleanup. Will make future multichannel code smaller
as well.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 ACL support is needed for many use cases now and should not be
ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL
ifdef so ACL support is always built into cifs.ko
Signed-off-by: Steve French <stfrench@microsoft.com>
If we mount the same share twice, we check the flags to see if the
second mount matches the earlier mount, but we left some flags out.
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix mount options comparison when serverino option is turned off later
in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs
mounts.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilove@microsoft.com>
If "max_credits" is overridden from its default by specifying
it on the smb3 mount then display it in /proc/mounts
Signed-off-by: Steve French <stfrench@microsoft.com>
When using multidialect negotiate (default or specifying vers=3.0 which
allows any smb3 dialect), fix how we check for an existing server session.
Before this fix if you mounted a second time to the same server (e.g. a
different share on the same server) we would only reuse the existing smb
session if a single dialect were requested (e.g. specifying vers=2.1 or vers=3.0
or vers=3.1.1 on the mount command). If a default mount (e.g. not
specifying vers=) is done then would always create a new socket connection
and SMB3 (or SMB3.1.1) session each time we connect to a different share
on the same server rather than reusing the existing one.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB3.1.1 GCM performs much better than the older CCM default:
more than twice as fast in the write patch (copy to the Samba
server on localhost for example) and 80% faster on the read
patch (copy from the server).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
GCM is faster. Request it during negotiate protocol.
Followon patch will add callouts to GCM crypto
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag,
so no need to do that again from its callers. Drop it.
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Use kmemdup rather than duplicating its implementation
This was reported by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The kernel test robot found a regression of xfs/054 in the conversion of
bulkstat to use the new iwalk infrastructure -- if a caller set *lastip
= 128 and invoked FSBULKSTAT_SINGLE, the bstat info would be for inode
128, but *lastip would be increased by the kernel to 129.
FSBULKSTAT_SINGLE never incremented lastip before, so it's incorrect to
make such an update to the internal lastino value now.
Fixes: 2810bd6840 ("xfs: convert bulkstat to new iwalk infrastructure")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Don't bail out before cleaning up a new allocation if the wait for
searching for a matching nfs client is interrupted. Memory leaks.
Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com
Fixes: 950a578c61 ("NFS: make nfs_match_client killable")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The NFS protocol doesn't support deduplication, so turn it off again.
Fixes: ce96e888fe ("Fix nfs4.2 return -EINVAL when do dedupe operation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
On the NFS client there is no low-impact way to determine the nfs4
lease time or whether the lease is expired, so add these to mountstats
with times displayed in seconds.
If the lease is not expired, display lease_expired=0. Otherwise,
display lease_expired=seconds_since_expired, similar to 'age:' line
in mountstats.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Now that the VM promises never to recurse back into the filesystem
layer on writeback, remove all the GFP_NOFS references etc from
the generic writeback code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
With NFSv4.1, different network connections need to be explicitly
bound to a session. During session startup, this is not possible
so only a single connection must be used for session startup.
So add a task flag to disable the default round-robin choice of
connections (when nconnect > 1) and force the use of a single
connection.
Then use that flag on all requests for session management - for
consistence, include NFSv4.0 management (SETCLIENTID) and session
destruction
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the user specifies -onconnect=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the pNFS data server
as well. The connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the user specifies the -onconn=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the server. The
connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow the user to specify that the client should use multiple connections
to the server. For the moment, this functionality will be limited to
TCP and to NFSv4.x (x>0).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In order to identify containers to the NFS client, we add a per-net
sysfs attribute that udev can fill with the appropriate identifier.
The identifier could be a unique hostname, but in most cases it
will probably be a persisted uuid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the client detects that close-to-open cache consistency has been
violated, and that the file or directory has been changed on the
server, then do a cache invalidation when we're done working with
the file.
The reason we don't do an immediate cache invalidation is that we
want to avoid performance problems due to false positives. Also,
note that we cannot guarantee cache consistency in this situation
even if we do invalidate the cache.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes: ce4ef7c0a8 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When mapping the NFSv4 context to an open mode and access mode,
we need to treat the FMODE_EXEC flag differently. For the open
mode, FMODE_EXEC means we need read share access. For the access
mode checking, we need to verify that the user actually has
execute access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull vfs fixlet from Al Viro:
"Fix bogus default y in Kconfig (VALIDATE_FS_PARSER)
That thing should not be turned on by default, especially since it's
not quiet in case it finds no problems. Geert has sent the obvious fix
quite a few times, but it fell through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: VALIDATE_FS_PARSER should default to n
failures on high-memory machines and fixing the DRC over RDMA.
-----BEGIN PGP SIGNATURE-----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=f2gw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two more quick bugfixes for nfsd: fixing a regression causing mount
failures on high-memory machines and fixing the DRC over RDMA"
* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix overflow causing non-working mounts on 1 TB machines
svcrdma: Ignore source port when computing DRC hash
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and xfs.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and ext4.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The xattr scrubber functions use the temporary memory buffer either for
storing bitmaps or for testing if attribute value extraction works. The
bitmap code always zeroes what it needs and the value extraction sets
the buffer contents, so it's not necessary to waste CPU time zeroing on
allocation.
Note that while we never read the contents that the attr value
extraction function sets, we do need to call it to check the remote
attribute header and CRCs to check for corruption.
A flame graph analysis showed that we were spending 7% of a xfs_scrub
run (the whole program, not just the attr scrubber itself) allocating
and zeroing 64k segments needlessly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In examining a flame graph of time spent running xfs_scrub on various
filesystems, I noticed that we spent nearly 7% of the total runtime on
allocating a zeroed 65k buffer for every SCRUB_TYPE_XATTR invocation.
We do this even if none of the attribute values were anywhere near 64k
in size, even if there were no attribute blocks to check space on, and
even if it just turns out there are no attributes at all.
Therefore, rearrange the xattr buffer setup code to support reallocating
with a bigger buffer and redistribute the callers of that function so
that we only allocate memory just prior to needing it, and only allocate
as much as we need. If we can't get memory with the ILOCK held we'll
bail out with EDEADLOCK which will allocate the maximum memory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move the code that allocates memory buffers for the extended attribute
scrub code into a separate function so we can reduce memory allocations
in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the open-coded attribute buffer pointer calculations with helper
functions to make it more obvious what we're doing with our freeform
memory allocation w.r.t. either storing xattr values or computing btree
block free space.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're iterating all the attributes using the built-in xattr
iterator, we can use the seen_enough variable to pass error codes back
to the main scrub function instead of flattening them into 0/1. This
will be used in a more exciting fashion in upcoming patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Currently if the allocation of roots or tmp_ulist fails the error handling
does not free up the allocation of path causing a memory leak. Fix this and
other similar leaks by moving the call of btrfs_free_path from label out
to label out_free_ulist.
Kudos to David Sterba for spotting the issue in my original fix and suggesting
the correct way to fix the leak and Anand Jain for spotting a double free
issue.
Addresses-Coverity: ("Resource leak")
Fixes: 5911c8fe05 ("btrfs: fiemap: preallocate ulists for btrfs_check_shared")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser
tables are vaguely sane. It was set to default to 'Y' for the moment to
catch errors in upcoming fs conversion development.
Make sure it is not enabled by default in the final release of v5.1.
Fixes: 31d921c7fb ("vfs: Add configuration parser helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Fix xarray entry association for mixed mappings
-----BEGIN PGP SIGNATURE-----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=NNXl
-----END PGP SIGNATURE-----
Merge tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fix from Dan Williams:
"A single dax fix that has been soaking awaiting other fixes under
discussion to join it. As it is getting late in the cycle lets proceed
with this fix and save follow-on changes for post-v5.3-rc1.
- Fix xarray entry association for mixed mappings"
* tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix xarray entry association for mixed mappings
When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.
This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.
But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.
Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.
Commit ae62c16e10 ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.
Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org
Fixes: bfe4037e72 ("aio: implement IOCB_CMD_POLL")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com
Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com
Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No point having two call sites (earlier in init_rootfs() from
mnt_init() in case we are going to use shmem-style rootfs,
later from do_basic_setup() unconditionally), along with the
logics in shmem_init() itself to make the second call a no-op...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
init_mount_tree() can get to rootfs_fs_type directly and that simplifies
a lot of things. We don't need to register it, we don't need to look
it up *and* we don't need to bother with preventing subsequent userland
mounts. That's the way we should've done that from the very beginning.
There is a user-visible change, namely the disappearance of "rootfs"
from /proc/filesystems. Note that it's been unmountable all along
and it didn't show up in /proc/mounts; however, it *is* a user-visible
change and theoretically some script might've been using its presence
in /proc/filesystems to tell 2.4.11+ from earlier kernels.
*IF* any complaints about behaviour change do show up, we could fake
it in /proc/filesystems. I very much doubt we'll have to, though.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only thing done by the latter is making ramfs visible
to mount(2); we don't need it there - rootfs is separate
and, in fact, made visible to mount(2) in the same init_rootfs().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the openpromfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the efivarfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
[AV: get rid of efivarfs_sb nonsense - it has never been used]
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Matthew Garrett <matthew.garrett@nebula.com>
cc: Jeremy Kerr <jk@ozlabs.org>
cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
cc: linux-efi@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the configfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the binfmt_misc filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is just two functions, put it in root-tree.c since it involves root
items.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have code for data and metadata reservations for delalloc. There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file. inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move this into transaction.c with the rest of the transaction related
code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These belong with the delayed refs related code, not in extent-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Simplification. No point passing the tree variable when it can be
evaluated from inode. The tests now use the io_tree from btrfs_inode as
opposed to creating one.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a new bulk ireq flag that enables userspace to ask us for a
special inode number instead of interpreting @ino as a literal inode
number. This enables us to query the root inode easily.
The reason for adding the ability to query specifically the root
directory inode is that certain programs (xfsdump and xfsrestore) want
to confirm when they've been pointed to the root directory. The
userspace code assumes the root directory is always the first result
from calling bulkstat with lastino == 0, but this isn't true if the
(initial btree roots + initial AGFL + inode alignment padding) is itself
long enough to be allocated to new inodes if all of those blocks should
happen to be free at the same time. Rather than make userspace guess
at internal filesystem state, we provide a direct query.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new xfs_bulk_ireq flag to constrain the iteration to a single AG.
If the passed-in startino value is zero then we start with the first
inode in the AG that the user passes in; otherwise, we iterate only
within the same AG as the passed-in inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Stephen writes:
After merging the driver-core tree, today's linux-next build (x86_64
allmodconfig) produced this warning:
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_debugfs_init':
fs/orangefs/orangefs-debugfs.c:193:1: warning: label 'out' defined but not used [-Wunused-label]
out:
^~~
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_kernel_debug_init':
fs/orangefs/orangefs-debugfs.c:204:17: warning: unused variable 'ret' [-Wunused-variable]
struct dentry *ret;
^~~
Fix this up and change the return type of the function to void as it can
not fail, which cleans up some more code and variables as well.
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f095adba36 ("orangefs: no need to check return value of debugfs_create functions")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen writes:
After merging the driver-core tree, today's linux-next build (arm
multi_v7_defconfig) produced this warning:
fs/ubifs/debug.c: In function 'dbg_debugfs_init_fs':
fs/ubifs/debug.c:2812:6: warning: unused variable 'err' [-Wunused-variable]
int err, n;
^~~
So fix this up properly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new "v5" inode group structure that fixes the alignment
and padding problems of the existing structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Introduce a new version of the in-core bulkstat structure that supports
our new v5 format features. This structure also fills the gaps in the
previous structure. We leave wiring up the ioctls for the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rename the bulkstat functions to 'fsbulkstat' so that they match the
ioctl names. We will be introducing a new set of bulkstat/inumbers
ioctls soon, and it will be important to keep the names straight.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove xfs_bstat_t, xfs_fsop_bulkreq_t, xfs_inogrp_t, and similarly
named compat typedefs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Decode the implementation ID and display in nfsd/clients/#/info. It may
be help identify the client. It won't be used otherwise.
(When this went into the protocol, I thought the implementation ID would
be a slippery slope towards implementation-specific workarounds as with
the http user-agent. But I guess I was wrong, the risk seems pretty low
now.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 clients are automatically expired and all their locks removed if
they don't contact the server for a certain amount of time (the lease
period, 90 seconds by default).
There can still be situations where that's not enough, so allow
userspace to force expiry by writing "expire\n" to the new
nfsd/client/#/ctl file.
(The generic "ctl" name is because I expect we may want to allow other
operations on clients in the future.)
The write will not return until the client is expired and all of its
locks and other state removed.
The fault injection code also provides a way of expiring clients, but it
fails if there are any in-progress RPC's referencing the client. Also,
its method of selecting a client to expire is a little more
primitive--it uses an IP address, which can't always uniquely specify an
NFSv4 client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a nfsd/clients/#/opens file to list some information about all the
opens held by the given client, including open modes, device numbers,
inode numbers, and open owners.
Open owners are totally opaque but seem to sometimes have some useful
ascii strings included, so passing through printable ascii characters
and escaping the rest seems useful while still being machine-readable.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add ip address, full client-provided identifier, and minor version.
There's much more that could possibly be useful but this is a start.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm exposing some information about NFS clients in pseudofiles. I
expect to eventually have simple tools to help read those pseudofiles.
But it's also helpful if the raw files are human-readable to the extent
possible. It aids debugging and makes them usable on systems that don't
have the latest nfs-utils.
A minor challenge there is opaque client-generated protocol objects like
state owners and client identifiers. Some clients generate those to
include handy information in plain ascii. But they may also include
arbitrary byte sequences.
I think the simplest approach is to limit to isprint(c) && isascii(c)
and escape everything else.
That means you can just cat the file and get something that looks OK.
Also, I'm trying to keep these files legal YAML, which requires them to
UTF-8, and this is a simple way to guarantee that.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rpc_copy_addr() copies only the IP address and misses any port numbers.
It seems potentially useful to keep the port number around too.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want clientid's on the wire to be randomized for reasons explained in
ebd7c72c63 "nfsd: randomize SETCLIENTID reply to help distinguish
servers". But I'd rather have mostly small integers for the clients/
directory.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep a second reference count which is what is really used to decide
when to free the client's memory.
Next I'm going to add an nfsd/clients/ directory with a subdirectory for
each NFSv4 client. File objects under nfsd/clients/ will hold these
references.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename this to a more descriptive name: it counts the number of
in-progress rpc's referencing this client.
Next I'm going to add a second refcount with a slightly different use.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep around one internal mount of the nfsd filesystem so that we can add
stuff to it when clients come and go, regardless of whether anyone has
it mounted.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The failure to unregister the shrinker results will result in corruption
when the nfsd_net is freed.
Also clean up the drc_slab while we're here.
Reported-by: syzbot+83a43746cebef3508b49@syzkaller.appspotmail.com
Fixes: db17b61765c2 ("nfsd4: drc containerization")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit bf8d909705 "nfsd: Decode and send 64bit time values" fixed the
code without updating the comment.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 95582b0083 "vfs: change inode times to use struct
timespec64" there are spots in the NFSv4 decoding where we decode the
protocol into a struct timeval and then convert that into a timeval64.
That's unnecesary in the NFSv4 case since the on-the-wire protocol also
uses 64-bit values. So just fix up our code to use timeval64 everywhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix sparse warnings:
fs/lockd/clntproc.c:57:6: warning: symbol 'nlmclnt_put_lockowner' was not declared. Should it be static?
fs/lockd/svclock.c:409:35: warning: symbol 'nlmsvc_lock_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After the update to use nlm_lockowners for the NLM server, there are no
more users of lm_compare_owner and lm_owner_key.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use the pid of lockd instead of the remote lock's svid for the fl_pid for
local POSIX locks. This allows proper enumeration of which local process
owns which lock. The svid is meaningless to local lock readers.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the NLM server allocates an nlm_lockowner for fl_owner, there's
no need for special hashing or comparison.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do as the NLM client: allocate and track a struct nlm_lockowner for use as
the fl_owner for locks created by the NLM sever. This allows us to keep
the svid within this structure for matching locks, and will allow us to
track the pid of lockd in a future patch. It should also allow easier
reference of the nlm_host in conflicting locks, and simplify lock hashing
and comparison.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields@redhat.com: fix type of some error returns]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nlm_lockowner structure that the client uses to track locks is
generally useful to the server as well. Very similar functions to handle
allocation and tracking of the nlm_lockowner will follow. Rename the client
functions for clarity.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After 89a26b3d29 "nfsd: split DRC global spinlock into per-bucket
locks", there is no longer a single global spinlock to protect these
stats.
So, really we need to fix that. For now, at least fix the comment.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd duplicate reply cache should not be shared between network
namespaces.
The most straightforward way to fix this is just to move every global in
the code to per-net-namespace memory, so that's what we do.
Still todo: sort out which members of nfsd_stats should be global and
which per-net-namespace.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since commit 10a68cdf10 (nfsd: fix performance-limiting session
calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with
1 TB of memory cannot be mounted anymore. The mount just hangs on the
client.
The gist of commit 10a68cdf10 is the change below.
-avail = clamp_t(int, avail, slotsize, avail/3);
+avail = clamp_t(int, avail, slotsize, total_avail/3);
Here are the macros.
#define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <)
#define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi)
`total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts
the values to `int`, which for 32-bit integers can only hold values
−2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1).
`avail` (in the function signature) is just 65536, so that no overflow
was happening. Before the commit the assignment would result in 21845,
and `num = 4`.
When using `total_avail`, it is causing the assignment to be
18446744072226137429 (printed as %lu), and `num` is then 4164608182.
My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the
server thinks there is no memory available any more for this client.
Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long`
fixes the issue.
Now, `avail = 65536` (before commit 10a68cdf10 `avail = 21845`), but
`num = 4` remains the same.
Fixes: c54f24e338 (nfsd: fix performance-limiting session calculation)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change return types of below functions as they never fails
xfs_log_mount_cancel
xlog_recover_cancel
xlog_recover_cancel_intents
fix below issue reported by coccicheck
fs/xfs/xfs_log_recover.c:4886:7-12: Unneeded variable: "error". Return
"0" on line 4926
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a pwork destroy function that uses polling instead of
uninterruptible sleep to wait for work items to finish so that we can
touch the softlockup watchdog. IOWs, gross hack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleanup allows the return value of the functions to be made void,
as no logic should care if these files succeed or not.
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152120.GA17450@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152204.GA17511@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo