filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop". Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).
So let's just return bool ("should we keep going?") - it's less confusing
that way. The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
do something for everything in directory, until we run into problem
and
find an entry in directory and do something to it.
The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.
"true means stop" would be more natural for the second group; "true
means keep going" - for the first one. I tried both variants and
the things like
if allocation failed
something = -ENOMEM;
return true;
just looked unnatural and asking for trouble.
[folded suggestion from Matthew Wilcox <willy@infradead.org>]
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With all implementations converted to ->dirty_folio, we can stop calling
this fallback method and remove it entirely.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.
Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire
that method up for the missing instances.
[hch@lst.de: ecryptfs: add a ->set_page_dirty cludge]
Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
crypt_stat memory itself is allocated when inode is created, in
ecryptfs_alloc_inode, which returns NULL on failure and is handled
by callers, which would prevent us getting to this point. It then
calls ecryptfs_init_crypt_stat which allocates crypt_stat->tfm
checking for and likewise handling allocation failure. Finally,
crypt_stat->flags has ECRYPTFS_STRUCT_INITIALIZED merged into it
in ecryptfs_init_crypt_stat as well.
Simply put, the conditions that the BUG_ON checks for will never
be triggered, as to even get to this function, the relevant conditions
will have already been fulfilled (or the inode allocation would fail in
the first place and thus no call to this function or those above it).
Cc: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-50-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 2c2a7552dd.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true. As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.
Cc: Aditya Pakki <pakki001@umn.edu>
Fixes: 2c2a7552dd ("ecryptfs: replace BUG_ON with error handling code")
Cc: stable <stable@vger.kernel.org>
Acked-by: Tyler Hicks <code@tyhicks.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-49-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- W=1 compiler warning cleanups
- Mutex initialization simplification
- Protect against NULL pointer exception during mount
-----BEGIN PGP SIGNATURE-----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=aHZx
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-5.13-rc1-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs updates from Tyler Hicks:
"Code cleanups and a bug fix
- W=1 compiler warning cleanups
- Mutex initialization simplification
- Protect against NULL pointer exception during mount"
* tag 'ecryptfs-5.13-rc1-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: fix kernel panic with null dev_name
ecryptfs: remove unused helpers
ecryptfs: Fix typo in message
eCryptfs: Use DEFINE_MUTEX() for mutex lock
ecryptfs: keystore: Fix some kernel-doc issues and demote non-conformant headers
ecryptfs: inode: Help out nearly-there header and demote non-conformant ones
ecryptfs: mmap: Help out one function header and demote other abuses
ecryptfs: crypto: Supply some missing param descriptions and demote abuses
ecryptfs: miscdev: File headers are not good kernel-doc candidates
ecryptfs: main: Demote a bunch of non-conformant kernel-doc headers
ecryptfs: messaging: Add missing param descriptions and demote abuses
ecryptfs: super: Fix formatting, naming and kernel-doc abuses
ecryptfs: file: Demote kernel-doc abuses
ecryptfs: kthread: Demote file header and provide description for 'cred'
ecryptfs: dentry: File headers are not good candidates for kernel-doc
ecryptfs: debug: Demote a couple of kernel-doc abuses
ecryptfs: read_write: File headers do not make good candidates for kernel-doc
ecryptfs: use DEFINE_MUTEX() for mutex lock
eCryptfs: add a semicolon
Pull exryptfs updates from Al Viro:
"The interesting part here is (ecryptfs) lock_parent() fixes - its
treatment of ->d_parent had been very wrong.
The rest is trivial cleanups"
* 'work.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs: ecryptfs_dentry_info->crypt_stat is never used
ecryptfs: get rid of unused accessors
ecryptfs: saner API for lock_parent()
ecryptfs: get rid of pointless dget/dput in ->symlink() and ->link()
When mounting eCryptfs, a null "dev_name" argument to ecryptfs_mount()
causes a kernel panic if the parsed options are valid. The easiest way to
reproduce this is to call mount() from userspace with an existing
eCryptfs mount's options and a "source" argument of 0.
Error out if "dev_name" is null in ecryptfs_mount()
Fixes: 237fead619 ("[PATCH] ecryptfs: fs/Makefile and fs/Kconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/keystore.c:25: warning: Incorrect use of kernel-doc format: * request_key returned an error instead of a valid key address;
fs/ecryptfs/keystore.c:30: warning: Function parameter or member 'err_code' not described in 'process_request_key_err'
fs/ecryptfs/keystore.c:30: warning: expecting prototype for eCryptfs(). Prototype was for process_request_key_err() instead
fs/ecryptfs/keystore.c:558: warning: Function parameter or member 'auth_tok_key' not described in 'ecryptfs_find_auth_tok_for_sig'
fs/ecryptfs/keystore.c:558: warning: Function parameter or member 'mount_crypt_stat' not described in 'ecryptfs_find_auth_tok_for_sig'
fs/ecryptfs/keystore.c:558: warning: Excess function parameter 'crypt_stat' description in 'ecryptfs_find_auth_tok_for_sig'
fs/ecryptfs/keystore.c:584: warning: cannot understand function prototype: 'struct ecryptfs_write_tag_70_packet_silly_stack '
fs/ecryptfs/keystore.c:622: warning: Function parameter or member 'dest' not described in 'ecryptfs_write_tag_70_packet'
fs/ecryptfs/keystore.c:622: warning: Function parameter or member 'remaining_bytes' not described in 'ecryptfs_write_tag_70_packet'
fs/ecryptfs/keystore.c:622: warning: Function parameter or member 'packet_size' not described in 'ecryptfs_write_tag_70_packet'
fs/ecryptfs/keystore.c:622: warning: Function parameter or member 'mount_crypt_stat' not described in 'ecryptfs_write_tag_70_packet'
fs/ecryptfs/keystore.c:622: warning: Function parameter or member 'filename_size' not described in 'ecryptfs_write_tag_70_packet'
fs/ecryptfs/keystore.c:622: warning: expecting prototype for write_tag_70_packet(). Prototype was for ecryptfs_write_tag_70_packet() instead
fs/ecryptfs/keystore.c:895: warning: expecting prototype for parse_tag_70_packet(). Prototype was for ecryptfs_parse_tag_70_packet() instead
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mhalcrow@us.ibm.com>
Cc: "Michael C. Thompson" <mcthomps@us.ibm.com>
Cc: "Trevor S. Highland" <trevor.highland@gmail.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/inode.c:27: warning: Function parameter or member 'dentry' not described in 'lock_parent'
fs/ecryptfs/inode.c:27: warning: Function parameter or member 'lower_dentry' not described in 'lock_parent'
fs/ecryptfs/inode.c:27: warning: Function parameter or member 'lower_dir' not described in 'lock_parent'
fs/ecryptfs/inode.c:27: warning: expecting prototype for eCryptfs(). Prototype was for lock_parent() instead
fs/ecryptfs/inode.c:211: warning: Function parameter or member 'ecryptfs_dentry' not described in 'ecryptfs_initialize_file'
fs/ecryptfs/inode.c:211: warning: Function parameter or member 'ecryptfs_inode' not described in 'ecryptfs_initialize_file'
fs/ecryptfs/inode.c:258: warning: Function parameter or member 'mnt_userns' not described in 'ecryptfs_create'
fs/ecryptfs/inode.c:258: warning: Function parameter or member 'directory_inode' not described in 'ecryptfs_create'
fs/ecryptfs/inode.c:258: warning: Function parameter or member 'ecryptfs_dentry' not described in 'ecryptfs_create'
fs/ecryptfs/inode.c:258: warning: Function parameter or member 'excl' not described in 'ecryptfs_create'
fs/ecryptfs/inode.c:258: warning: Excess function parameter 'dir' description in 'ecryptfs_create'
fs/ecryptfs/inode.c:258: warning: Excess function parameter 'dentry' description in 'ecryptfs_create'
fs/ecryptfs/inode.c:320: warning: Function parameter or member 'dentry' not described in 'ecryptfs_lookup_interpose'
fs/ecryptfs/inode.c:320: warning: Function parameter or member 'lower_dentry' not described in 'ecryptfs_lookup_interpose'
fs/ecryptfs/inode.c:887: warning: Function parameter or member 'mnt_userns' not described in 'ecryptfs_setattr'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: "Michael C. Thompsion" <mcthomps@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/mmap.c:26: warning: Incorrect use of kernel-doc format: * ecryptfs_get_locked_page
fs/ecryptfs/mmap.c:34: warning: Function parameter or member 'inode' not described in 'ecryptfs_get_locked_page'
fs/ecryptfs/mmap.c:34: warning: Function parameter or member 'index' not described in 'ecryptfs_get_locked_page'
fs/ecryptfs/mmap.c:34: warning: expecting prototype for eCryptfs(). Prototype was for ecryptfs_get_locked_page() instead
fs/ecryptfs/mmap.c:52: warning: Function parameter or member 'wbc' not described in 'ecryptfs_writepage'
fs/ecryptfs/mmap.c:98: warning: Incorrect use of kernel-doc format: * ecryptfs_copy_up_encrypted_with_header
fs/ecryptfs/mmap.c:110: warning: Function parameter or member 'page' not described in 'ecryptfs_copy_up_encrypted_with_header'
fs/ecryptfs/mmap.c:110: warning: Function parameter or member 'crypt_stat' not described in 'ecryptfs_copy_up_encrypted_with_header'
fs/ecryptfs/mmap.c:110: warning: expecting prototype for Header Extent(). Prototype was for ecryptfs_copy_up_encrypted_with_header() instead
fs/ecryptfs/mmap.c:233: warning: wrong kernel-doc identifier on line:
fs/ecryptfs/mmap.c:379: warning: Function parameter or member 'ecryptfs_inode' not described in 'ecryptfs_write_inode_size_to_header'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/crypto.c:29: warning: expecting prototype for eCryptfs(). Prototype was for DECRYPT() instead
fs/ecryptfs/crypto.c:360: warning: Function parameter or member 'crypt_stat' not described in 'lower_offset_for_page'
fs/ecryptfs/crypto.c:360: warning: Function parameter or member 'page' not described in 'lower_offset_for_page'
fs/ecryptfs/crypto.c:637: warning: Function parameter or member 'crypt_stat' not described in 'ecryptfs_compute_root_iv'
fs/ecryptfs/crypto.c:1386: warning: Function parameter or member 'ecryptfs_dentry' not described in 'ecryptfs_read_metadata'
fs/ecryptfs/crypto.c:1463: warning: Function parameter or member 'filename' not described in 'ecryptfs_encrypt_filename'
fs/ecryptfs/crypto.c:1463: warning: Function parameter or member 'mount_crypt_stat' not described in 'ecryptfs_encrypt_filename'
fs/ecryptfs/crypto.c:1897: warning: Function parameter or member 'encoded_name_size' not described in 'ecryptfs_encrypt_and_encode_filename'
fs/ecryptfs/crypto.c:1897: warning: Function parameter or member 'mount_crypt_stat' not described in 'ecryptfs_encrypt_and_encode_filename'
fs/ecryptfs/crypto.c:1897: warning: Function parameter or member 'name_size' not described in 'ecryptfs_encrypt_and_encode_filename'
fs/ecryptfs/crypto.c:1897: warning: Excess function parameter 'crypt_stat' description in 'ecryptfs_encrypt_and_encode_filename'
fs/ecryptfs/crypto.c:1897: warning: Excess function parameter 'length' description in 'ecryptfs_encrypt_and_encode_filename'
fs/ecryptfs/crypto.c:2006: warning: Function parameter or member 'sb' not described in 'ecryptfs_decode_and_decrypt_filename'
fs/ecryptfs/crypto.c:2006: warning: Excess function parameter 'ecryptfs_dir_dentry' description in 'ecryptfs_decode_and_decrypt_filename'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: "Michael C. Thompson" <mcthomps@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[tyhicks: Fix typo in ecryptfs_encrypt_and_encode_filename() func docs]
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Supply description for the 'daemon' param too.
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/miscdev.c:19: warning: cannot understand function prototype: 'atomic_t ecryptfs_num_miscdev_opens; '
fs/ecryptfs/miscdev.c:323: warning: Function parameter or member 'daemon' not described in 'ecryptfs_miscdev_response'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mhalcrow@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/main.c:28: warning: Incorrect use of kernel-doc format: * Module parameter that defines the ecryptfs_verbosity level.
fs/ecryptfs/main.c:30: warning: cannot understand function prototype: 'int ecryptfs_verbosity = 0; '
fs/ecryptfs/main.c:40: warning: cannot understand function prototype: 'unsigned int ecryptfs_message_buf_len = ECRYPTFS_DEFAULT_MSG_CTX_ELEMS; '
fs/ecryptfs/main.c:52: warning: cannot understand function prototype: 'signed long ecryptfs_message_wait_timeout = ECRYPTFS_MAX_MSG_CTX_TTL / HZ; '
fs/ecryptfs/main.c:65: warning: cannot understand function prototype: 'unsigned int ecryptfs_number_of_users = ECRYPTFS_DEFAULT_NUM_USERS; '
fs/ecryptfs/main.c:106: warning: Function parameter or member 'dentry' not described in 'ecryptfs_init_lower_file'
fs/ecryptfs/main.c:106: warning: Function parameter or member 'lower_file' not described in 'ecryptfs_init_lower_file'
fs/ecryptfs/main.c:106: warning: Excess function parameter 'ecryptfs_dentry' description in 'ecryptfs_init_lower_file'
fs/ecryptfs/main.c:244: warning: Function parameter or member 'sbi' not described in 'ecryptfs_parse_options'
fs/ecryptfs/main.c:244: warning: Excess function parameter 'sb' description in 'ecryptfs_parse_options'
fs/ecryptfs/main.c:478: warning: Function parameter or member 'fs_type' not described in 'ecryptfs_mount'
fs/ecryptfs/main.c:478: warning: Function parameter or member 'flags' not described in 'ecryptfs_mount'
fs/ecryptfs/main.c:478: warning: expecting prototype for ecryptfs_get_sb(). Prototype was for ecryptfs_mount() instead
fs/ecryptfs/main.c:645: warning: Function parameter or member 'vptr' not described in 'inode_info_init_once'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: "Michael C. Thompson" <mcthomps@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[tyhicks: Correct the function documentation for ecryptfs_mount()]
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/messaging.c:15: warning: Function parameter or member 'ecryptfs_msg_ctx_free_list' not described in 'LIST_HEAD'
fs/ecryptfs/messaging.c:15: warning: expecting prototype for eCryptfs(). Prototype was for LIST_HEAD() instead
fs/ecryptfs/messaging.c:157: warning: Function parameter or member 'daemon' not described in 'ecryptfs_exorcise_daemon'
fs/ecryptfs/messaging.c:207: warning: Function parameter or member 'daemon' not described in 'ecryptfs_process_response'
fs/ecryptfs/messaging.c:207: warning: expecting prototype for ecryptfs_process_reponse(). Prototype was for ecryptfs_process_response() instead
fs/ecryptfs/messaging.c:262: warning: Function parameter or member 'msg_type' not described in 'ecryptfs_send_message_locked'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Michael A. Halcrow" <mhalcrow@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/super.c:22: warning: cannot understand function prototype: 'struct kmem_cache *ecryptfs_inode_info_cache; '
fs/ecryptfs/super.c:91: warning: Function parameter or member 'dentry' not described in 'ecryptfs_statfs'
fs/ecryptfs/super.c:91: warning: Excess function parameter 'sb' description in 'ecryptfs_statfs'
fs/ecryptfs/super.c:120: warning: Function parameter or member 'inode' not described in 'ecryptfs_evict_inode'
fs/ecryptfs/super.c:133: warning: Function parameter or member 'm' not described in 'ecryptfs_show_options'
fs/ecryptfs/super.c:133: warning: Function parameter or member 'root' not described in 'ecryptfs_show_options'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: "Michael C. Thompson" <mcthomps@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/file.c:23: warning: Incorrect use of kernel-doc format: * ecryptfs_read_update_atime
fs/ecryptfs/file.c:34: warning: Function parameter or member 'iocb' not described in 'ecryptfs_read_update_atime'
fs/ecryptfs/file.c:34: warning: Function parameter or member 'to' not described in 'ecryptfs_read_update_atime'
fs/ecryptfs/file.c:34: warning: expecting prototype for eCryptfs(). Prototype was for ecryptfs_read_update_atime() instead
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mhalcrow@us.ibm.com>
Cc: "Michael C. Thompson" <mcthomps@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/kthread.c:16: warning: cannot understand function prototype: 'struct ecryptfs_open_req '
fs/ecryptfs/kthread.c:120: warning: Function parameter or member 'cred' not described in 'ecryptfs_privileged_open'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/dentry.c:19: warning: Incorrect use of kernel-doc format: * ecryptfs_d_revalidate - revalidate an ecryptfs dentry
fs/ecryptfs/dentry.c:32: warning: Function parameter or member 'dentry' not described in 'ecryptfs_d_revalidate'
fs/ecryptfs/dentry.c:32: warning: Function parameter or member 'flags' not described in 'ecryptfs_d_revalidate'
fs/ecryptfs/dentry.c:32: warning: expecting prototype for eCryptfs(). Prototype was for ecryptfs_d_revalidate() instead
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/debug.c:13: warning: Incorrect use of kernel-doc format: * ecryptfs_dump_auth_tok - debug function to print auth toks
fs/ecryptfs/debug.c:19: warning: Function parameter or member 'auth_tok' not described in 'ecryptfs_dump_auth_tok'
fs/ecryptfs/debug.c:19: warning: expecting prototype for eCryptfs(). Prototype was for ecryptfs_dump_auth_tok() instead
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Provide missing param description for 'page_index' too.
Fixes the following W=1 kernel build warning(s):
fs/ecryptfs/read_write.c:16: warning: Incorrect use of kernel-doc format: * ecryptfs_write_lower
fs/ecryptfs/read_write.c:29: warning: Function parameter or member 'ecryptfs_inode' not described in 'ecryptfs_write_lower'
fs/ecryptfs/read_write.c:29: warning: Function parameter or member 'data' not described in 'ecryptfs_write_lower'
fs/ecryptfs/read_write.c:29: warning: Function parameter or member 'offset' not described in 'ecryptfs_write_lower'
fs/ecryptfs/read_write.c:29: warning: Function parameter or member 'size' not described in 'ecryptfs_write_lower'
fs/ecryptfs/read_write.c:29: warning: expecting prototype for eCryptfs(). Prototype was for ecryptfs_write_lower() instead
fs/ecryptfs/read_write.c:248: warning: Function parameter or member 'page_index' not described in 'ecryptfs_read_lower_page_segment'
Cc: Tyler Hicks <code@tyhicks.com>
Cc: "Michael A. Halcrow" <mahalcro@us.ibm.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBzdS0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDdAIAIpKH/tAHhH7s7QH
m5ewgE8foP7M5Ue9fp3+JmbtaYSzhCAMcKhqGtat/zk5PvA9AoYCDXrTetfYtBHh
LUOmhL9hcKItNobfkYBok6BiFjGUEL3HMqz5w+MUsMwnXIc4RXqfJmsQ932z9Kxf
yDwe6ehIzJVrQLI/C0mTamYRHu2aiZ1VWzhKuT493rLeg0R2odCCIClPN+/QvCwb
8/sk6l1c8eOUYYMUzKFZifaZGb12qDjRt4pZmk51aMTzg0WCpElJG+7Uqr4QQhZP
p6xeNuUQq6WwxtlDkmo79Uzkrurb5tN2/hZ1RcJhs3EdHfpR0MjIyH3Znnb31gnu
39VjHhg=
=4KP/
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rc7' into ecryptfs/next
Required to pick up idmapped mount changes which changed some function
parameters.
Switch all users of lock_parent() to the approach used by ->unlink()
and ->rmdir() - instead of playing with dget_parent() of underlying
dentry of child,
* start with ecryptfs dentry of child.
* find underlying dentries for that dentry and its parent
(which is stable, since the parent directory in upper layer is
held at least shared). No need to pin them, they are already pinned
by ecryptfs dentries.
* lock the inode of undelying directory of parent
* check if it's the parent of underlying dentry of child.
->d_parent of underlying dentry of child might be unstable. However,
result of its comparison with underlying dentry of parent *is* stable now.
Turn that into replacement of lock_parent(), convert the existing callers
of lock_parent() to that, along with ecryptfs_unlink() and ecryptfs_rmdir().
Callers need only the underlying dentry of child and inode of underlying
dentry of parent, so lock_parent() passes those to the caller now.
Note that underlying directory is locked in any case, success or failure.
That approach does not need a primitive for unlocking - we hadn't grabbed
any dentry references, so all we need is to unlock the underlying directory
inode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
calls in ->unlink(), ->rmdir() and ->rename() make sense - we want
to prevent the underlying dentries going negative there. In
->symlink() and ->link() they are absolutely pointless.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Function like macros should have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
[tyhicks: Remove the trailing semicolin from the macro's definition, as
suggested by Joe Perches]
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Prior to commit 7c03e2cda4 ("vfs: move cap_convert_nscap() call into
vfs_setxattr()") the translation of nscap->rootid did not take stacked
filesystems (overlayfs and ecryptfs) into account.
That patch fixed the overlay case, but made the ecryptfs case worse.
Restore old the behavior for ecryptfs that existed before the overlayfs
fix. This does not fix ecryptfs's handling of complex user namespace
setups, but it does make sure existing setups don't regress.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tyler Hicks <code@tyhicks.com>
Fixes: 7c03e2cda4 ("vfs: move cap_convert_nscap() call into vfs_setxattr()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Prevent ecryptfs from being mounted on top of idmapped mounts.
Stacking filesystems need to be prevented from being mounted on top of
idmapped mounts until they have have been converted to handle this.
Link: https://lore.kernel.org/r/20210121131959.646623-28-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The various vfs_*() helpers are called by filesystems or by the vfs
itself to perform core operations such as create, link, mkdir, mknod, rename,
rmdir, tmpfile and unlink. Enable them to handle idmapped mounts. If the
inode is accessed through an idmapped mount map it into the
mount's user namespace and pass it down. Afterwards the checks and
operations are identical to non-idmapped mounts. If the initial user
namespace is passed nothing changes so non-idmapped mounts will see
identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-15-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
In order to handle idmapped mounts we will extend the vfs rename helper
to take two new arguments in follow up patches. Since this operations
already takes a bunch of arguments add a simple struct renamedata and
make the current helper use it before we extend it.
Link: https://lore.kernel.org/r/20210121131959.646623-14-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.
Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Linus Torvalds