When dumping classes by parent, kernel would return classes twice:
| # tc qdisc add dev lo root prio
| # tc class show dev lo
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| # tc class show dev lo parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
This comes from qdisc_match_from_root() potentially returning the root
qdisc itself if its handle matched. Though in that case, root's classes
were already dumped a few lines above.
Fixes: cb395b2010 ("net: sched: optimize class dumps")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl_rx() and rtl_tx() are called only if the respective bits are set
in the interrupt status register. Under high load NAPI may not be
able to process all data (work_done == budget) and it will schedule
subsequent calls to the poll callback.
rtl_ack_events() however resets the bits in the interrupt status
register, therefore subsequent calls to rtl8169_poll() won't call
rtl_rx() and rtl_tx() - chip interrupts are still disabled.
Fix this by calling rtl_rx() and rtl_tx() independent of the bits
set in the interrupt status register. Both functions will detect
if there's nothing to do for them.
Fixes: da78dbff2e ("r8169: remove work from irq handler.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a general protection fault, caused by accessing the contents
of a flip_done completion object that has already been freed. It occurs
due to the preemption of a non-blocking commit worker thread W by
another commit thread X. X continues to clear its atomic state at the
end, destroying the CRTC commit object that W still needs. Switching
back to W and accessing the commit objects then leads to bad results.
Worker W becomes preemptable when waiting for flip_done to complete. At
this point, a frequently occurring commit thread X can take over. Here's
an example where W is a worker thread that flips on both CRTCs, and X
does a legacy cursor update on both CRTCs:
...
1. W does flip work
2. W runs commit_hw_done()
3. W waits for flip_done on CRTC 1
4. > flip_done for CRTC 1 completes
5. W finishes waiting for CRTC 1
6. W waits for flip_done on CRTC 2
7. > Preempted by X
8. > flip_done for CRTC 2 completes
9. X atomic_check: hw_done and flip_done are complete on all CRTCs
10. X updates cursor on both CRTCs
11. X destroys atomic state
12. X done
13. > Switch back to W
14. W waits for flip_done on CRTC 2
15. W raises general protection fault
The error looks like so:
general protection fault: 0000 [#1] PREEMPT SMP PTI
**snip**
Call Trace:
lock_acquire+0xa2/0x1b0
_raw_spin_lock_irq+0x39/0x70
wait_for_completion_timeout+0x31/0x130
drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper]
amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu]
commit_tail+0x3d/0x70 [drm_kms_helper]
process_one_work+0x212/0x650
worker_thread+0x49/0x420
kthread+0xfb/0x130
ret_from_fork+0x3a/0x50
Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O)
gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm(O) drm(O)
Note that i915 has this issue masked, since hw_done is signaled after
waiting for flip_done. Doing so will block the cursor update from
happening until hw_done is signaled, preventing the cursor commit from
destroying the state.
v2: The reference on the commit object needs to be obtained before
hw_done() is signaled, since that's the point where another commit
is allowed to modify the state. Assuming that the
new_crtc_state->commit object still exists within flip_done() is
incorrect.
Fix by getting a reference in setup_commit(), and releasing it
during default_clear().
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
Steffen Klassert says:
====================
pull request (net): ipsec 2018-10-18
1) Free the xfrm interface gro_cells when deleting the
interface, otherwise we leak it. From Li RongQing.
2) net/core/flow.c does not exist anymore, so remove it
from the MAINTAINERS file.
3) Fix a slab-out-of-bounds in _decode_session6.
From Alexei Starovoitov.
4) Fix RCU protection when policies inserted into
thei bydst lists. From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).
More importantly, this patch fixes one issue introduced in a22c4d7e34
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.
Fixes: a22c4d7e34 ("block: re-add discard_granularity and alignment checks")
Cc: stable@vger.kernel.org
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fscache_set_key() can incur an out-of-bounds read, reported by KASAN:
BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x5b3/0x680 [fscache]
Read of size 4 at addr ffff88084ff056d4 by task mount.nfs/32615
and also reported by syzbot at https://lkml.org/lkml/2018/7/8/236
BUG: KASAN: slab-out-of-bounds in fscache_set_key fs/fscache/cookie.c:120 [inline]
BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x7a9/0x880 fs/fscache/cookie.c:171
Read of size 4 at addr ffff8801d3cc8bb4 by task syz-executor907/4466
This happens for any index_key_len which is not divisible by 4 and is
larger than the size of the inline key, because the code allocates exactly
index_key_len for the key buffer, but the hashing loop is stepping through
it 4 bytes (u32) at a time in the buf[] array.
Fix this by calculating how many u32 buffers we'll need by using
DIV_ROUND_UP, and then using kcalloc() to allocate a precleared allocation
buffer to hold the index_key, then using that same count as the hashing
index limit.
Fixes: ec0328e46d ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The inline key in struct rxrpc_cookie is insufficiently initialized,
zeroing only 3 of the 4 slots, therefore an index_key_len between 13 and 15
bytes will end up hashing uninitialized memory because the memcpy only
partially fills the last buf[] element.
Fix this by clearing fscache_cookie objects on allocation rather than using
the slab constructor to initialise them. We're going to pretty much fill
in the entire struct anyway, so bringing it into our dcache writably
shouldn't incur much overhead.
This removes the need to do clearance in fscache_set_key() (where we aren't
doing it correctly anyway).
Also, we don't need to set cookie->key_len in fscache_set_key() as we
already did it in the only caller, so remove that.
Fixes: ec0328e46d ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Reported-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent. Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc. So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.
The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.
Cc: stable@vger.kernel.org
Fixes: 9ae326a690 (CacheFiles: A cache that backs onto a mounted filesystem)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case. What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages". No, mremap() obviously just _moves_ the page from one page
table location to another.
That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.
As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).
This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using non-GPL licenses for our documentation is rather problematic,
as it can directly include other files, which generally are GPLv2
licensed and thus not compatible.
Remove this license now that the only user (idr.rst) is gone to avoid
people semi-accidentally using it again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew writes:
"IDA/IDR fixes for 4.19
I have two tiny fixes, one for the IDA test-suite and one for the IDR
documentation license."
* 'ida-fixes-4.19-rc8' of git://git.infradead.org/users/willy/linux-dax:
idr: Change documentation license
test_ida: Fix lockdep warning
- Stop fallbacking to kallsyms for vDSO symbols lookup, this wasn't
being really used and is not valid in arches such as Sparc, where
user and kernel space don't share the address space, relying only on
cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
- Align cpu map synthesized events properly, fixing SIGBUS in
CPUs like Sparc (David Miller)
- Fix use of alternatives to find JDIR (Jarod Wilson)
- Store ids for events with their own cpus when synthesizing user
level event details (scale, unit, etc) events, fixing a crash
when recording a PMU event with a cpumask defined (Jiri Olsa)
- Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)
- Fix detection of tracefs path in systems without tracefs, where
that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)
- Pass build flags to traceevent build, allowing using alternative
flags in distro packages, RPM, for instance (Jiri Olsa)
- Fix 'perf report' crash on invalid inline debug information (Milian Wolff)
- Synch kvm uapi copies (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW8eytQAKCRCyPKLppCJ+
Jz94AP9Ra7FFmnMuffimP5pIkUacfqkLXPG3Lymxa8+pm0FH6gD/cWUZCxNdchBN
v4zFXT1i9iR2YCKu8/1iijVx2wtpZQw=
=Dh50
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.19-20181017' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Stop falling back to kallsyms for vDSO symbols lookup, this wasn't
being really used and is not valid in arches such as Sparc, where
user and kernel space don't share the address space, relying only on
cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
- Align CPU map synthesized events properly, fixing SIGBUS in
CPUs like Sparc (David Miller)
- Fix use of alternatives to find JDIR (Jarod Wilson)
- Store IDs for events with their own CPUs when synthesizing user
level event details (scale, unit, etc) events, fixing a crash
when recording a PMU event with a cpumask defined (Jiri Olsa)
- Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)
- Fix detection of tracefs path in systems without tracefs, where
that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)
- Pass build flags to traceevent build, allowing using alternative
flags in distro packages, RPM, for instance (Jiri Olsa)
- Fix 'perf report' crash on invalid inline debug information (Milian Wolff)
- Synch KVM UAPI copies (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the skb space ends in an unresolved entry while dumping we'll miss
some unresolved entries. The reason is due to zeroing the entry counter
between dumping resolved and unresolved mfc entries. We should just
keep counting until the whole table is dumped and zero when we move to
the next as we have a separate table counter.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 8fb472c09b ("ipmr: improve hash scalability")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot_vlant_wait_for_completion() function is very similar to the
ocelot_mact_wait_for_completion(). It seemed to have be copied but the
comment was not updated, so let's fix it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp data size should be calculated by subtracting data chunk header's
length from chunk_hdr->length, not just data header.
Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 713a98d90c ("virtio-net: serialize tx routine during reset")
introduces netif_tx_disable() after netif_device_detach() in order to
avoid use-after-free of tx queues. However, there are two issues.
1) Its operation is redundant with netif_device_detach() in case the
interface is running.
2) In case of the interface is not running before suspending and
resuming, the tx does not get resumed by netif_device_attach().
This results in losing network connectivity.
It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for
serializing tx routine during reset. This also preserves the symmetry
of netif_device_detach() and netif_device_attach().
Fixes commit 713a98d90c ("virtio-net: serialize tx routine during reset")
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix size mismatch of tracepoint array
- Have preemptirq test module use same clock source of the selftest
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW8eRhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkEgAP4vscLVMSYBTUuDNXX0+l8FVdrpPagL
1tjTJpTUfG3QLQEA9XOl8vR/Yy/BywcU7K2R3zGbo7Qh6AgpWl2pJcmsGQk=
=XS5E
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: Two fixes for 4.19
This fixes two bugs:
- Fix size mismatch of tracepoint array
- Have preemptirq test module use same clock source of the selftest"
* tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
tracepoint: Fix tracepoint array element size mismatch
The commit eb63f2964d ("udp6: add missing checks on edumux packet
processing") used the same return code convention of the ipv4 counterpart,
but ipv6 uses the opposite one: positive values means resubmit.
This change addresses the issue, using positive return value for
resubmitting. Also update the related comment, which was broken, too.
Fixes: eb63f2964d ("udp6: add missing checks on edumux packet processing")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the switch driver (e.g., mlxsw_spectrum) determines it needs to
flash a new firmware version it resets the ASIC after the flashing
process. The bus driver (e.g., mlxsw_pci) then registers itself again
with mlxsw_core which means (among other things) that the device
registers itself again with the hwmon subsystem again.
Since the device was registered with the hwmon subsystem using
devm_hwmon_device_register_with_groups(), then the old hwmon device
(registered before the flashing) was never unregistered and was
referencing stale data, resulting in a use-after free.
Fix by removing reliance on device managed APIs in mlxsw_hwmon_init().
Fixes: c86d62cc41 ("mlxsw: spectrum: Reset FW after flash")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sctp_wait_for_connect is called to wait for connect ready
for sp->strm_interleave in sctp_sendmsg_to_asoc, a panic could
be triggered if cpu is scheduled out and the new asoc is freed
elsewhere, as it will return err and later the asoc gets freed
again in sctp_sendmsg.
[ 285.840764] list_del corruption, ffff9f0f7b284078->next is LIST_POISON1 (dead000000000100)
[ 285.843590] WARNING: CPU: 1 PID: 8861 at lib/list_debug.c:47 __list_del_entry_valid+0x50/0xa0
[ 285.846193] Kernel panic - not syncing: panic_on_warn set ...
[ 285.846193]
[ 285.848206] CPU: 1 PID: 8861 Comm: sctp_ndata Kdump: loaded Not tainted 4.19.0-rc7.label #584
[ 285.850559] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 285.852164] Call Trace:
...
[ 285.872210] ? __list_del_entry_valid+0x50/0xa0
[ 285.872894] sctp_association_free+0x42/0x2d0 [sctp]
[ 285.873612] sctp_sendmsg+0x5a4/0x6b0 [sctp]
[ 285.874236] sock_sendmsg+0x30/0x40
[ 285.874741] ___sys_sendmsg+0x27a/0x290
[ 285.875304] ? __switch_to_asm+0x34/0x70
[ 285.875872] ? __switch_to_asm+0x40/0x70
[ 285.876438] ? ptep_set_access_flags+0x2a/0x30
[ 285.877083] ? do_wp_page+0x151/0x540
[ 285.877614] __sys_sendmsg+0x58/0xa0
[ 285.878138] do_syscall_64+0x55/0x180
[ 285.878669] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is a similar issue with the one fixed in Commit ca3af4dd28
("sctp: do not free asoc when it is already dead in sctp_sendmsg").
But this one can't be fixed by returning -ESRCH for the dead asoc
in sctp_wait_for_connect, as it will break sctp_connect's return
value to users.
This patch is to simply set err to -ESRCH before it returns to
sctp_sendmsg when any err is returned by sctp_wait_for_connect
for sp->strm_interleave, so that no asoc would be freed due to
this.
When users see this error, they will know the packet hasn't been
sent. And it also makes sense to not free asoc because waiting
connect fails, like the second call for sctp_wait_for_connect in
sctp_sendmsg_to_asoc.
Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported an use-after-free involving sctp_id2asoc. Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:
CPU 1 CPU 2
(working on socket 1) (working on socket 2)
sctp_association_destroy
sctp_id2asoc
spin lock
grab the asoc from idr
spin unlock
spin lock
remove asoc from idr
spin unlock
free(asoc)
if asoc->base.sk != sk ... [*]
This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).
We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.
Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to d49c88d767 ("r8169: Enable MSI-X on RTL8106e") after
e9d0ba506ea8 ("PCI: Reprogram bridge prefetch registers on resume")
we can safely assume that this also fixes the root cause of
the issue worked around by 7c53a72245 ("r8169: don't use MSI-X on
RTL8168g"). So let's revert it.
Fixes: 7c53a72245 ("r8169: don't use MSI-X on RTL8168g")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pid_task() dereferences rcu protected tasks array.
But there is no rcu_read_lock() in shutdown_umh() routine so that
rcu_read_lock() is needed.
get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock()
then calls pid_task(). if task isn't NULL, it increases reference count
of task.
test commands:
%modprobe bpfilter
%modprobe -rv bpfilter
splat looks like:
[15102.030932] =============================
[15102.030957] WARNING: suspicious RCU usage
[15102.030985] 4.19.0-rc7+ #21 Not tainted
[15102.031010] -----------------------------
[15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage!
[15102.031063]
other info that might help us debug this:
[15102.031332]
rcu_scheduler_active = 2, debug_locks = 1
[15102.031363] 1 lock held by modprobe/1570:
[15102.031389] #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter]
[15102.031552]
stack backtrace:
[15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21
[15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[15102.031628] Call Trace:
[15102.031676] dump_stack+0xc9/0x16b
[15102.031723] ? show_regs_print_info+0x5/0x5
[15102.031801] ? lockdep_rcu_suspicious+0x117/0x160
[15102.031855] pid_task+0x134/0x160
[15102.031900] ? find_vpid+0xf0/0xf0
[15102.032017] shutdown_umh.constprop.1+0x1e/0x53 [bpfilter]
[15102.032055] stop_umh+0x46/0x52 [bpfilter]
[15102.032092] __x64_sys_delete_module+0x47e/0x570
[ ... ]
Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
pin_index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue
'ops->pin_config' [r] (local cap)
Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch complains that "val" would be uninitialized if kstrtoul() fails.
Fixes: 9a08862a5d ("vDSO for sparc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang currently warns:
drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
~~~~~~~~~~~~~~ ^ ~~
1 warning generated.
The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.
Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.
Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio says:
====================
geneve, vxlan: Don't set exceptions if skb->len < mtu
This series fixes the exception abuse described in 2/2, and 1/2
is just a preparatory change to make 2/2 less ugly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We shouldn't abuse exceptions: if the destination MTU is already higher
than what we're transmitting, no exception should be created.
Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f15ca723c1 ("net: don't call update_pmtu unconditionally") avoids
that we try updating PMTU for a non-existent destination, but didn't clean
up cases where the check was already explicit. Drop those redundant checks.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
First, the trap number for 32-bit syscalls is 0x10.
Also, only negate the return value when syscall error is indicated by
the carry bit being set.
Signed-off-by: David S. Miller <davem@davemloft.net>
The preemptirq_delay_test module is used for the ftrace selftest code that
tests the latency tracers. The problem is that it uses ktime for the delay
loop, and then checks the tracer to see if the delay loop is caught, but the
tracer uses trace_clock_local() which uses various different other clocks to
measure the latency. As ktime uses the clock cycles, and the code then
converts that to nanoseconds, it causes rounding errors, and the preemptirq
latency tests are failing due to being off by 1 (it expects to see a delay
of 500000 us, but the delay is only 499999 us). This is happening due to a
rounding error in the ktime (which is totally legit). The purpose of the
test is to see if it can catch the delay, not to test the accuracy between
trace_clock_local() and ktime_get(). Best to use apples to apples, and have
the delay loop use the same clock as the latency tracer does.
Cc: stable@vger.kernel.org
Fixes: f96e8577da ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit 46e0c9be20 ("kernel: tracepoints: add support for relative
references") changes the layout of the __tracepoint_ptrs section on
architectures supporting relative references. However, it does so
without turning struct tracepoint * const into const int elsewhere in
the tracepoint code, which has the following side-effect:
Setting mod->num_tracepoints is done in by module.c:
mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs",
sizeof(*mod->tracepoints_ptrs),
&mod->num_tracepoints);
Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size
(rather than sizeof(int)), num_tracepoints is erroneously set to half the
size it should be on 64-bit arch. So a module with an odd number of
tracepoints misses the last tracepoint due to effect of integer
division.
So in the module going notifier:
for_each_tracepoint_range(mod->tracepoints_ptrs,
mod->tracepoints_ptrs + mod->num_tracepoints,
tp_module_going_check_quiescent, NULL);
the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually
evaluates to something within the bounds of the array, but miss the
last tracepoint if the number of tracepoints is odd on 64-bit arch.
Fix this by introducing a new typedef: tracepoint_ptr_t, which
is either "const int" on architectures that have PREL32 relocations,
or "struct tracepoint * const" on architectures that does not have
this feature.
Also provide a new tracepoint_ptr_defer() static inline to
encapsulate deferencing this type rather than duplicate code and
ugly idefs within the for_each_tracepoint_range() implementation.
This issue appears in 4.19-rc kernels, and should ideally be fixed
before the end of the rc cycle.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
num can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn:
potential spectre issue 'fsg_opts->common->luns' [r] (local cap)
Fix this by sanitizing num before using it to index
fsg_opts->common->luns
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felipe Balbi <felipe.balbi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David reports that:
<quote>
Perf has this hack where it uses the kernel symbol map as a backup when
a symbol can't be found in the user's symbol table(s).
This causes problems because the tests driving this code path use
machine__kernel_ip(), and that is completely meaningless on Sparc. On
sparc64 the kernel and user live in physically separate virtual address
spaces, rather than a shared one. And the kernel lives at a virtual
address that overlaps common userspace addresses. So this test passes
almost all the time when a user symbol lookup fails.
The consequence of this is that, if the unfound user virtual address in
the sample doesn't match up to a kernel symbol either, we trigger things
like this code in builtin-top.c:
if (al.sym == NULL && al.map != NULL) {
const char *msg = "Kernel samples will not be resolved.\n";
/*
* As we do lazy loading of symtabs we only will know if the
* specified vmlinux file is invalid when we actually have a
* hit in kernel space and then try to load it. So if we get
* here and there are _no_ symbols in the DSO backing the
* kernel map, bail out.
*
* We may never get here, for instance, if we use -K/
* --hide-kernel-symbols, even if the user specifies an
* invalid --vmlinux ;-)
*/
if (!machine->kptr_restrict_warned && !top->vmlinux_warned &&
__map__is_kernel(al.map) && map__has_symbols(al.map)) {
if (symbol_conf.vmlinux_name) {
char serr[256];
dso__strerror_load(al.map->dso, serr, sizeof(serr));
ui__warning("The %s file can't be used: %s\n%s",
symbol_conf.vmlinux_name, serr, msg);
} else {
ui__warning("A vmlinux file was not found.\n%s",
msg);
}
if (use_browser <= 0)
sleep(5);
top->vmlinux_warned = true;
}
}
When I fire up a compilation on sparc, this triggers immediately.
I'm trying to figure out what the "backup to kernel map" code is
accomplishing.
I see some language in the current code and in the changes that have
happened in this area talking about vdso. Does that really happen?
The vdso is mapped into userspace virtual addresses, not kernel ones.
More history. This didn't cause problems on sparc some time ago,
because the kernel IP check used to be "ip < 0" :-) Sparc kernel
addresses are not negative. But now with machine__kernel_ip(), which
works using the symbol table determined kernel address range, it does
trigger.
What it all boils down to is that on architectures like sparc,
machine__kernel_ip() should always return false in this scenerio, and
therefore this kind of logic:
if (cpumode == PERF_RECORD_MISC_USER && machine &&
mg != &machine->kmaps &&
machine__kernel_ip(machine, al->addr)) {
is basically invalid. PERF_RECORD_MISC_USER implies no kernel address
can possibly match for the sample/event in question (no matter how
hard you try!) :-)
</>
So, I thought something had changed and in the past we would somehow
find that address in the kallsyms, but I couldn't find anything to back
that up, the patch introducing this is over a decade old, lots of things
changed, so I was just thinking I was missing something.
I tried a gtod busy loop to generate vdso activity and added a 'perf
probe' at that branch, on x86_64 to see if it ever gets hit:
Made thread__find_map() noinline, as 'perf probe' in lines of inline
functions seems to not be working, only at function start. (Masami?)
# perf probe -x ~/bin/perf -L thread__find_map:57
<thread__find_map@/home/acme/git/perf/tools/perf/util/event.c:57>
57 if (cpumode == PERF_RECORD_MISC_USER && machine &&
58 mg != &machine->kmaps &&
59 machine__kernel_ip(machine, al->addr)) {
60 mg = &machine->kmaps;
61 load_map = true;
62 goto try_again;
}
} else {
/*
* Kernel maps might be changed when loading
* symbols so loading
* must be done prior to using kernel maps.
*/
69 if (load_map)
70 map__load(al->map);
71 al->addr = al->map->map_ip(al->map, al->addr);
# perf probe -x ~/bin/perf thread__find_map:60
Added new event:
probe_perf:thread__find_map (on thread__find_map:60 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:thread__find_map -aR sleep 1
#
Then used this to see if, system wide, those probe points were being hit:
# perf trace -e *perf:thread*/max-stack=8/
^C[root@jouet ~]#
No hits when running 'perf top' and:
# cat gtod.c
#include <sys/time.h>
int main(void)
{
struct timeval tv;
while (1)
gettimeofday(&tv, 0);
return 0;
}
[root@jouet c]# ./gtod
^C
Pressed 'P' in 'perf top' and the [vdso] samples are there:
62.84% [vdso] [.] __vdso_gettimeofday
8.13% gtod [.] main
7.51% [vdso] [.] 0x0000000000000914
5.78% [vdso] [.] 0x0000000000000917
5.43% gtod [.] _init
2.71% [vdso] [.] 0x000000000000092d
0.35% [kernel] [k] native_io_delay
0.33% libc-2.26.so [.] __memmove_avx_unaligned_erms
0.20% [vdso] [.] 0x000000000000091d
0.17% [i2c_i801] [k] i801_access
0.06% firefox [.] free
0.06% libglib-2.0.so.0.5400.3 [.] g_source_iter_next
0.05% [vdso] [.] 0x0000000000000919
0.05% libpthread-2.26.so [.] __pthread_mutex_lock
0.05% libpixman-1.so.0.34.0 [.] 0x000000000006d3a7
0.04% [kernel] [k] entry_SYSCALL_64_trampoline
0.04% libxul.so [.] style::dom_apis::query_selector_slow
0.04% [kernel] [k] module_get_kallsym
0.04% firefox [.] malloc
0.04% [vdso] [.] 0x0000000000000910
I added a 'perf probe' to thread__find_map:69, and that surely got tons
of hits, i.e. for every map found, just to make sure the 'perf probe'
command was really working.
In the process I noticed a bug, we're only have records for '[vdso]' for
pre-existing commands, i.e. ones that are running when we start 'perf top',
when we will generate the PERF_RECORD_MMAP by looking at /perf/PID/maps.
I.e. like this, for preexisting processes with a vdso map, again,
tracing for all the system, only pre-existing processes get a [vdso] map
(when having one):
[root@jouet ~]# perf probe -x ~/bin/perf __machine__addnew_vdso
Added new event:
probe_perf:__machine__addnew_vdso (on __machine__addnew_vdso in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:__machine__addnew_vdso -aR sleep 1
[root@jouet ~]# perf trace -e probe_perf:__machine__addnew_vdso/max-stack=8/
0.000 probe_perf:__machine__addnew_vdso:(568eb3)
__machine__addnew_vdso (/home/acme/bin/perf)
map__new (/home/acme/bin/perf)
machine__process_mmap2_event (/home/acme/bin/perf)
machine__process_event (/home/acme/bin/perf)
perf_event__process (/home/acme/bin/perf)
perf_tool__process_synth_event (/home/acme/bin/perf)
perf_event__synthesize_mmap_events (/home/acme/bin/perf)
__event__synthesize_thread (/home/acme/bin/perf)
The kernel is generating a PERF_RECORD_MMAP for vDSOs, but somehow
'perf top' is not getting those records while 'perf record' is:
# perf record ~acme/c/gtod
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.076 MB perf.data (1499 samples) ]
# perf report -D | grep PERF_RECORD_MMAP2
71293612401913 0x11b48 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x400000(0x1000) @ 0 fd:02 1137 541179306]: r-xp /home/acme/c/gtod
71293612419012 0x11be0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a2783000(0x227000) @ 0 fd:00 3146370 854107250]: r-xp /usr/lib64/ld-2.26.so
71293612432110 0x11c50 [0x60]: PERF_RECORD_MMAP2 25484/25484: [0x7ffcdb53a000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
71293612509944 0x11cb0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a23cd000(0x3b6000) @ 0 fd:00 3149723 262067164]: r-xp /usr/lib64/libc-2.26.so
#
# perf script | grep vdso | head
gtod 25484 71293.612768: 2485554 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.613576: 2149343 cycles:ppp: 7ffcdb53a917 [unknown] ([vdso])
gtod 25484 71293.614274: 1814652 cycles:ppp: 7ffcdb53aca8 __vdso_gettimeofday+0x98 ([vdso])
gtod 25484 71293.614862: 1669070 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615404: 1451589 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615999: 1269941 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.616405: 1177946 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.616775: 1121290 cycles:ppp: 7ffcdb53ac47 __vdso_gettimeofday+0x37 ([vdso])
gtod 25484 71293.617150: 1037721 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.617478: 994526 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
#
The patch is the obvious one and with it we also continue to resolve
vdso symbols for pre-existing processes in 'perf top' and for all
processes in 'perf record' + 'perf report/script'.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David Miller <davem@davemloft.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cs7skq9pp0kjypiju6o7trse@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Helge writes:
"parisc fix:
Fix an unitialized variable usage in the parisc unwind code."
* 'parisc-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix uninitialized variable usage in unwind.c
and generating noise.
-----BEGIN PGP SIGNATURE-----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=Vt/u
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Stephen writes:
"clk fixes for v4.19-rc8
One fix for the Allwinner A10 SoC's audio PLL that wasn't properly
set and generating noise."
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: sun4i: Set VCO and PLL bias current to lowest setting
Booting an i486 with "no387 nofxsr" ends with with the following crash:
math_emulate: 0060:c101987d
Kernel panic - not syncing: Math emulation needed in kernel
on the first context switch in user land.
The reason is that copy_fpregs_to_fpstate() tries FNSAVE which does not work
as the FPU is turned off.
This bug was introduced in:
f1c8cd0176 ("x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active")
Add a check for X86_FEATURE_FPU before trying to save FPU registers (we
have such a check in switch_fpu_finish() already).
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: f1c8cd0176 ("x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active")
Link: http://lkml.kernel.org/r/20181016202525.29437-4-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
c5bedc6847 ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")
introduced the 'fpu' variable at top of __restore_xstate_sig(),
which now shadows the other definition:
arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one
arch/x86/kernel/fpu/signal.c:271:20: originally declared here
Remove the shadowed definition of 'fpu', as the two definitions are the same.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c5bedc6847 ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")
Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
16561f27f9 ("x86/entry: Add some paranoid entry/exit CR3 handling comments")
... added some comments. This improves them a bit:
- When I first read the new comments, it was unclear to me whether
they were referring to the case where paranoid_entry interrupted
other entry code or where paranoid_entry was itself interrupted.
Clarify it.
- Remove the EBX comment. We no longer use EBX as a SWAPGS
indicator.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c47daa1888dc2298e7e1d3f82bd76b776ea33393.1539542111.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Even if not on an entry stack, the CS's high bits must be
initialized because they are unconditionally evaluated in
PARANOID_EXIT_TO_KERNEL_MODE.
Failing to do so broke the boot on Galileo Gen2 and IOT2000 boards.
[ bp: Make the commit message tone passive and impartial. ]
Fixes: b92a165df1 ("x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrea Arcangeli <aarcange@redhat.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Brian Gerst <brgerst@gmail.com>
CC: Dave Hansen <dave.hansen@intel.com>
CC: David Laight <David.Laight@aculab.com>
CC: Denys Vlasenko <dvlasenk@redhat.com>
CC: Eduardo Valentin <eduval@amazon.com>
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@kernel.org>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Josh Poimboeuf <jpoimboe@redhat.com>
CC: Juergen Gross <jgross@suse.com>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Will Deacon <will.deacon@arm.com>
CC: aliguori@amazon.com
CC: daniel.gruss@iaik.tugraz.at
CC: hughd@google.com
CC: keescook@google.com
CC: linux-mm <linux-mm@kvack.org>
CC: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/f271c747-1714-5a5b-a71f-ae189a093b8d@siemens.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the extra user build flags are propagated to libtraceevent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: "Herton R. Krzesinski" <herton@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Link: http://lkml.kernel.org/r/20181016150614.21260-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the function name for an inline frame is invalid, we must not try
to demangle this symbol, otherwise we crash with:
#0 0x0000555555895c01 in bfd_demangle ()
#1 0x0000555555823262 in demangle_sym (dso=0x555555d92b90, elf_name=0x0, kmodule=0) at util/symbol-elf.c:215
#2 dso__demangle_sym (dso=dso@entry=0x555555d92b90, kmodule=<optimized out>, kmodule@entry=0, elf_name=elf_name@entry=0x0) at util/symbol-elf.c:400
#3 0x00005555557fef4b in new_inline_sym (funcname=0x0, base_sym=0x555555d92b90, dso=0x555555d92b90) at util/srcline.c:89
#4 inline_list__append_dso_a2l (dso=dso@entry=0x555555c7bb00, node=node@entry=0x555555e31810, sym=sym@entry=0x555555d92b90) at util/srcline.c:264
#5 0x00005555557ff27f in addr2line (dso_name=dso_name@entry=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf", addr=addr@entry=2888, file=file@entry=0x0,
line=line@entry=0x0, dso=dso@entry=0x555555c7bb00, unwind_inlines=unwind_inlines@entry=true, node=0x555555e31810, sym=0x555555d92b90) at util/srcline.c:313
#6 0x00005555557ffe7c in addr2inlines (sym=0x555555d92b90, dso=0x555555c7bb00, addr=2888, dso_name=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf")
at util/srcline.c:358
So instead handle the case where we get invalid function names for
inlined frames and use a fallback '??' function name instead.
While this crash was originally reported by Hadrien for rust code, I can
now also reproduce it with trivial C++ code. Indeed, it seems like
libbfd fails to interpret the debug information for the inline frame
symbol name:
$ addr2line -e /home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf -if b48
main
/usr/include/c++/8.2.1/complex:610
??
/usr/include/c++/8.2.1/complex:618
??
/usr/include/c++/8.2.1/complex:675
??
/usr/include/c++/8.2.1/complex:685
main
/home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39
I've reported this bug upstream and also attached a patch there which
should fix this issue:
https://sourceware.org/bugzilla/show_bug.cgi?id=23715
Reported-by: Hadrien Grasland <grasland@lal.in2p3.fr>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a64489c56c ("perf report: Find the inline stack for a given address")
[ The above 'Fixes:' cset is where originally the problem was
introduced, i.e. using a2l->funcname without checking if it is NULL,
but this current patch fixes the current codebase, i.e. multiple csets
were applied after a64489c56c before the problem was reported by Hadrien ]
Link: http://lkml.kernel.org/r/20180926135207.30263-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to rfc7496 section 4.3 or 4.4:
sprstat_policy: This parameter indicates for which PR-SCTP policy
the user wants the information. It is an error to use
SCTP_PR_SCTP_NONE in sprstat_policy. If SCTP_PR_SCTP_ALL is used,
the counters provided are aggregated over all supported policies.
We change to dump pr_assoc and pr_stream all status by SCTP_PR_SCTP_ALL
instead, and return error for SCTP_PR_SCTP_NONE, as it also said "It is
an error to use SCTP_PR_SCTP_NONE in sprstat_policy. "
Fixes: 826d253d57 ("sctp: add SCTP_PR_ASSOC_STATUS on sctp sockopt")
Fixes: d229d48d18 ("sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David writes:
"Sparc fixes
1) Revert the %pOF change, it causes regressions.
2) Wire up io_pgetevents().
3) Fix perf events on single-PCR sparc64 cpus.
4) Do proper perf event throttling like arm and x86."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Revert "sparc: Convert to using %pOFn instead of device_node.name"
sparc64: Set %l4 properly on trap return after handling signals.
sparc64: Make proc_id signed.
sparc: Throttle perf events properly.
sparc: Fix single-pcr perf event counter management.
sparc: Wire up io_pgetevents system call.
sunvdc: Remove VLA usage
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlvFDJkUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXO0Gw/9HZWNjxZuiBeJfC0D+CYLn9Tkj4Ym
3bUzc44+f2F+B5irzWZS19btX3WzqRGjmplMnVoVCGkABPx1I2jUH88WiUSgAi0R
rqnZD7rHhtGVdKh97cqcF9imt10RE5myxpaArG9V9Cr8G8EEZXaYGMRZ7hGc05o9
i9ZotSQSirSAfEUkVNmiA0ek74TWHYOc8SgALNzMmzTFcy3K2qRT7vPEMAa406gW
s/8XFWkFhiYmSivk0Nzgc4yOKKBNAzRC63ssl9k8u0ztJvc2HSy/tR+b1bDoIK2k
TY0bc5UVl/X/YrRTx8M7Mzr9KNRSO3hugEzDyq8B55myxI++TFRgc4OWqa976lH8
J51kvf+TEh5jDvo+3nHMUJj1DQM6ZIJy8mGrEWahabLaxbiYvWzuh9FkNZDOiy4/
B0sUskoKoaih02oHOuOuSmVe8nhJ+HYA6ENk+sGfEKjColGNUGpHulQhXK1FYX6w
62drdcp599u8QCtYqzIEgV4nGrEKw3SyBaM5sb2dcN7l2najr0qQwDzzLVxVLWu6
lMV1ulqUZNU1SF/VlpHwn4yvdOV89ENoghJrbNzcrFfIuETl/D3y7udn37woi6GC
COPb/MimsKFrHa36dxAJHhbUjZRn6JYVaM+Nt39kn9b+mvlGDUGQlrQXTyuNqC8T
yxk/9NEmd83hDuM=
=fQ6g
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181015' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Paul writes:
"SELinux fixes for v4.19
We've got one SELinux "fix" that I'd like to get into v4.19 if
possible. I'm using double quotes on "fix" as this is just an update
to the MAINTAINERS file and not a code change. From my perspective,
MAINTAINERS updates generally don't warrant inclusion during the -rcX
phase, but this is a change to the mailing list location so it seemed
prudent to get this in before v4.19 is released"
* tag 'selinux-pr-20181015' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
MAINTAINERS: update the SELinux mailing list location
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The size of the resulting cpu map can be smaller than a multiple of
sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event
will not be aligned properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: 6c872901af ("perf cpu_map: Add cpu_map event synthesize function")
Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Phil Sutter