add_delayed_ref_head implements the logic to both initialize a head_ref
structure as well as perform the necessary operations to add it to the
delayed ref machinery. This has resulted in a very cumebrsome interface
with loads of parameters and code, which at first glance, looks very
unwieldy. Begin untangling it by first extracting the initialization
only code in its own function. It's more or less verbatim copy of the
first part of add_delayed_ref_head.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the initialization part and the critical section code have been
split it's a lot easier to open code add_delayed_data_ref. Do so in the
following manner:
1. The common init function is put immediately after memory-to-be-initialized
is allocated, followed by the specific data ref initialization.
2. The only piece of code that remains in the critical section is
insert_delayed_ref call.
3. Tracing and memory freeing code is moved outside of the critical
section.
No functional changes, just an overall shorter critical section.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the initialization part and the critical section code have been
split it's a lot easier to open code add_delayed_tree_ref. Do so in the
following manner:
1. The comming init code is put immediately after memory-to-be-initialized
is allocated, followed by the ref-specific member initialization.
2. The only piece of code that remains in the critical section is
insert_delayed_ref call.
3. Tracing and memory freeing code is put outside of the critical
section as well.
The only real change here is an overall shorter critical section when
dealing with delayed tree refs. From functional point of view - the code
is unchanged.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the newly introduced helper and remove the duplicate code. No
functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the newly introduced common helper. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
THe majority of the init code for struct btrfs_delayed_ref_node is
duplicated in add_delayed_data_ref and add_delayed_tree_ref. Factor out
the common bits in init_delayed_ref_common. This function is going to be
used in future patches to clean that up. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not good to overwrite -ENOMEM using -EINVAL when failing from mount
option parsing, so just return original error code.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info is always available from the context so we don't need to
store it in the structure.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging quota rescan race, some times btrfs rescan could account
some old (committed) leaf and then re-account newly committed leaf
in next generation.
This race needs extra transid to locate, so add @transid for
trace_btrfs_qgroup_account_extent() for such debug.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Trivial fix to spelling mistake of function name in btrfs_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is used in only one place and devid argument is always
passed 0. So just remove it, similarly to how it was removed in the
userspace code.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Origin trace_qgroup_update_counters() only records qgroup id and its
reference count change.
It's good enough to debug qgroup accounting change, but when rescan race
is involved, it's pretty hard to distinguish which modification belongs
to which rescan.
So add old_rfer and old_excl trace output to help distinguishing
different rescan instance.
(Different rescan instance should reset its qgroup->rfer to 0)
For trace event parameter, it just changes from u64 qgroup_id to struct
btrfs_qgroup *qgroup, so number of parameters is not changed at all.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's used only in inode.c so makes no sense to have it exported. Also
move the definition of btrfs_delalloc_work to inode.c since it's used
only this file.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When allocating a delalloc work we are always setting the delayed_iput
to 0. So remove the delay_iput member of btrfs_delalloc_work, as a
result also remove it as a parameter from btrfs_alloc_delalloc_work
since it's not used anymore.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0 so remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ rename to start_delalloc_inodes ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0, so just remove it and collapse the constant value
to the only function we are passing it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This parameter was introduced alongside the function in
eb73c1b7ce ("Btrfs: introduce per-subvolume delalloc inode list") to
avoid deadlocks since this function was used in the transaction commit
path. However, commit 8d875f95da ("btrfs: disable strict file flushes
for renames and truncates") removed that usage, rendering the parameter
obsolete.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_shrink_device, before btrfs_search_slot, path->reada is set to
READA_FORWARD. But I think READA_BACK is correct.
Since:
1. key.offset is set to (u64)-1
2. after btrfs_search_slot, btrfs_previous_item is called
So, for readahead previous items, READA_BACK is the correct one.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will add the following trace events:
1) btrfs_remove_block_group
For btrfs_remove_block_group() function.
Triggered when a block group is really removed.
2) btrfs_add_unused_block_group
Triggered which block group is added to unused_bgs list.
3) btrfs_skip_unused_block_group
Triggered which unused block group is not deleted.
These trace events is pretty handy to debug case related to block group
auto remove.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info can be extracted from btrfs_block_group_cache, and all
btrfs_block_group_cache is created by btrfs_create_block_group_cache()
with fs_info initialized, no need to worry about NULL pointer
dereference.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the commit c6100a4b4e ("Btrfs: replace tree->mapping with
tree->private_data"), parameter fs_info in alloc_reloc_control is
not used. So remove it.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new member struct btrfs_raid_attr::mindev_error so that
btrfs_raid_array can maintain the error code to return if the minimum
number of devices condition is not met while trying to delete a device
in the given raid. And so we can drop btrfs_raid_mindev_error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new member struct btrfs_raid_attr::bg_flag so that
btrfs_raid_array can maintain the bit map flag of the raid type, and
so we can drop btrfs_raid_group.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new member struct btrfs_raid_attr::raid_name so that
btrfs_raid_array can maintain the name of the raid type, and so we can
drop btrfs_raid_type_names.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pretty handy if we can get the debug output for locking status of
an extent buffer, specially for race condition related debugging.
So add the following output for btrfs_print_tree() and
btrfs_print_leaf():
- refs
- write_locks (as w:%d)
- read_locks (as r:%d)
- blocking_writers (as bw:%d)
- blocking_readers (as br:%d)
- spinning_writers (as sw:%d)
- spinning_readers (as sr:%d)
- lock_owner
- current->pid
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
The helper is quite simple and I'd like to see the locking in the
caller.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While the spinlock does not cause problems, using the mutex is more
correct and consistent with others. The global status of balance is eg.
checked from btrfs_pause_balance or btrfs_cancel_balance with mutex.
Resuming balance happens during mount or ro->rw remount. In the former
case, no other user of the balance_ctl exists, in the latter, balance
cannot run until the ro/rw transition is finished.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter controls locking of the stats part but we can lock it
unconditionally, as this only happens once when balance starts. This is
not performance critical.
Add the prefix for an exported function.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Balance cannot be started on a read-only filesystem and will have to
finish/exit before eg. going to read-only via remount.
In case the filesystem is forcibly set to read-only after an error,
balance will finish anyway and if the cancel call is too fast it will
just wait for that to happen.
The last case is when the balance is paused after mount but it's
read-only and cancelling would want to delete the item. The test is
moved after the check if balance is running at all, as it looks more
logical to report "no balance running" instead of "read-only
filesystem".
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently fs_info::balance_running is 0 or 1 and does not use the
semantics of atomics. The pause and cancel check for 0, that can happen
only after __btrfs_balance exits for whatever reason.
Parallel calls to balance ioctl may enter btrfs_ioctl_balance multiple
times but will block on the balance_mutex that protects the
fs_info::flags bit.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mutual exclusion of device add/rm and balance was done by the volume
mutex up to version 3.7. The commit 5ac00addc7 ("Btrfs: disallow
mutually exclusive admin operations from user mode") added a bit that
essentially tracked the same information.
The status bit has an advantage over a mutex that it can be set without
restrictions of function context, so it started to be used in the
mount-time resuming of balance or device replace.
But we don't really need to track the same information in two ways.
1) After the previous cleanups, the main ioctl handlers for
add/del/resize copy the EXCL_OP bit next to the volume mutex, here
it's clearly safe.
2) Resuming balance during mount or after rw remount will set only the
EXCL_OP bit and the volume_mutex is held in the kernel thread that
calls btrfs_balance.
3) Resuming device replace during mount or after rw remount is done
after balance and is excluded by the EXCL_OP bit. It does not take
the volume_mutex at all and completely relies on the EXCL_OP bit.
4) The resuming of balance and dev-replace cannot hapen at the same time
as the ioctls cannot be started in parallel. Nevertheless, a crafted
image could trigger that and a warning is printed.
5) Balance is normally excluded by EXCL_OP and also uses own mutex to
protect against concurrent access to its status data. There's some
trickery to maintain the right lock nesting in case we need to
reexamine the status in btrfs_ioctl_balance. The volume_mutex is
removed and the unlock/lock sequence is left in place as we might
expect other waiters to proceed.
6) Similar to 5, the unlock/lock sequence is kept in
btrfs_cancel_balance to allow waiters to continue.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The volume mutex does not protect against anything in this case, the
comment about scrub is right but not related to locking and looks
confusing. The comment in btrfs_find_device_missing_or_by_path is wrong
and confusing too.
The device_list_mutex is not held here to protect device lookup, but in
this case device replace cannot run in parallel with device removal (due
to exclusive op protection), so we don't need further locking here.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function __cancel_balance name is confusing with the cancel
operation of balance and it really resets the state of balance back to
zero. The unset_balance_control helper is called only from one place and
simple enough to be inlined.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace a WARN_ON with a proper check and message in case something goes
really wrong and resumed balance cannot set up its exclusive status.
The check is a user friendly assertion, I don't expect to ever happen
under normal circumstances.
Also document that the paused balance starts here and owns the exclusive
op status.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The device replace is paused by unmount or read only remount, and
resumed on next mount or write remount.
The exclusive status should be checked properly as it's a global
invariant and we must not allow 2 operations run. In this case, the
balance can be also paused and resumed under same conditions. It's
always checked first so dev-replace could see the EXCL_OP already taken,
BUT, the ioctl would never let start both at the same time.
Replace the WARN_ON with message and return 0, indicating no error as
this is purely theoretical and the user will be informed. Resolving that
manually should be possible by waiting for the other operation to finish
or cancel the paused state.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move locking and unlocking next to the BTRFS_FS_EXCL_OP bit manipulation
so it's obvious that the two happen at the same time.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function logically belongs there and there's only a single caller,
no need to export it. No code changes.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function will be used outside of volumes.c, the allocation
btrfs_alloc_device is also exported.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparatory cleanup that will make clear that the only
successful way out of btrfs_init_dev_replace_tgtdev will also set the
device_out to a valid pointer. With this guarantee, the callers can be
simplified.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is called once and is fairly small, we can merge it with
the caller.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function uses fs_info::fs_devices number of time, however we
declare and use it only at the end, instead do it in the beginning of
the function and use it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_device() declares struct list_head *head pointer and used only once,
instead just use it directly.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_open_devices() is un-exported drop __ prefix and rename it to
open_fs_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_close_devices() is un-exported, drop the __ prefix and rename it
to close_fs_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_open_devices() declares struct list_head *head, however head is
used only once, instead use btrfs_fs_devices::devices directly.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_fs_devices::list is the list of BTRFS fsid in the kernel, a generic
name 'list' makes it's search very difficult, rename it to fs_list.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov