Commit Graph

74 Commits

Author SHA1 Message Date
Anup Patel 6f1e9e946f RISC-V: Move setup_vm() to mm/init.c
The setup_vm() is responsible for setting up initial page table hence
should be placed in mm/init.c.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-21 11:26:31 +05:30
Anup Patel 0651c263c8 RISC-V: Move setup_bootmem() to mm/init.c
The setup_bootmem() mainly populates memblocks and does early memory
reservations. The right location for this function is mm/init.c. It
calls setup_initrd() so we move that as well.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
2019-02-21 11:25:49 +05:30
Anup Patel 680f9b8e6c RISC-V: Setup init_mm before parse_early_param()
We should setup init_mm before doing parse_early_param() in setup_arch()
to be consistent with setup_arch() of other architectures such as x86,
ARM, and ARM64.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-21 10:31:48 +05:30
Johan Hovold e1b1381b31
riscv: use pr_info and friends
Use the pr_info and pr_err macros instead of printk with explicit log
levels.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11 15:35:11 -08:00
Guo Ren 28198c4639
riscv: fixup max_low_pfn with PFN_DOWN.
max_low_pfn should be pfn_size not byte_size.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <mao_han@c-sky.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 17:51:53 -08:00
Paul Walmsley 8fd6e05c74
arch: riscv: support kernel command line forcing when no DTB passed
CONFIG_CMDLINE_FORCE doesn't work on RISC-V when no DTB is passed into
the kernel.  This is because the code that forces the kernel command
line only runs if a valid DTB is present at boot.  During debugging,
it's useful to have the ability to force kernel command lines even
when no DTB is present.  This patch adds support for doing so.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07 08:08:00 -08:00
Anup Patel 7ba12bb676
RISC-V: Remove EARLY_PRINTK support
The EARLY_PRINTK using SBI console calls is not required
any more because we now have RISC-V SBI support in generic
earlycon framework.

Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-17 10:23:46 -08:00
Palmer Dabbelt d26c4bbf99
RISC-V: SMP cleanup and new features
This patch series now has evolved to contain several related changes.

1. Updated the assorted cleanup series by Palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html

2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.

3. Included Anup's cleanup and IPI stat patch.

All the patch series have been combined to avoid conflicts as a lot of
common code is changed different patch sets. Atish has mostly addressed
review comments and fixed checkpatch errors from Palmer's and Anup's
series.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:41:43 -07:00
Atish Patra f99fb607fb
RISC-V: Use Linux logical CPU number instead of hartid
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Atish Patra 6825c7a80f
RISC-V: Add logical CPU indexing for RISC-V
Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.

Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Zong Li 51858aaf9b
RISC-V: Use swiotlb on RV64 only
Only RV64 supports swiotlb. On RV32, it don't select the SWIOTLB.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Atish Patra ef1f225874
RISCV: Fix end PFN for low memory
Use memblock_end_of_DRAM which provides correct last low memory
PFN. Without that, DMA32 region becomes empty resulting in zero
pages being allocated for DMA32.

This patch is based on earlier patch from palmer which never
merged into 4.19. I just edited the commit text to make more
sense.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-02 12:50:01 -07:00
Guenter Roeck e866d3e84e
riscv: Do not overwrite initrd_start and initrd_end
setup_initrd() overwrites initrd_start and initrd_end if __initramfs_size
is larger than 0, which is always true even if there is no embedded
initramfs. This prevents booting qemu with "-initrd" parameter.
Overwriting initrd_start and initrd_end is not necessary since
__initramfs_start and __initramfs_size are used directly in
populate_rootfs() to load the built-in initramfs, so just drop
that code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-09-04 17:04:50 -07:00
Palmer Dabbelt 5b5c2a2c44
RISC-V: Add early printk support via the SBI console
This code lives entirely within the RISC-V arch code.  I've left it
within an "#ifdef CONFIG_EARLY_PRINTK" despite always having
EARLY_PRINTK support on RISC-V just in case someone wants to remove
it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13 08:31:30 -07:00
Rob Herring f67f10b8a6
riscv: remove unnecessary of_platform_populate call
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 14:12:38 -07:00
Christoph Hellwig 10314e09d0 riscv: add swiotlb support
All RISC-V platforms today lack an IOMMU. However, legacy PCI devices
sometimes require DMA-memory to be in the low 32 bits.  To make this work,
we enable the software-based bounce buffers from swiotlb.  They only impose
overhead when the device in question cannot address the full 64-bit address
space, so a perfect fit.

This patch assumes that DMA is coherent with the processor and the PCI
bus.  It also assumes that the processor and devices share a common
address space. This is true for all RISC-V platforms so far.

[changelog stolen from an earlier patch by Palmer Dabbelt that did the
 more complicated swiotlb wireup before the recent consolidation]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-19 08:46:26 +02:00
Michael Clark 8b08f50152
Rename sbi_save to parse_dtb to improve code readability
The sbi_ prefix would seem to indicate an SBI interface, and save is not
very specific. After applying this patch, reading head.S makes more sense.

Signed-off-by: Michael Clark <michaeljclark@mac.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-02-20 10:56:26 -08:00
Christoph Hellwig 5ec9c4ff04
riscv: add ZONE_DMA32
This patch allows devices that require memory that can be addressed
using 32-bit addresses to work easily on RISC-V systems.  The newly
improved dma-direct ops will tap into this pool automatically for
32-bit addressing.

Based on an earlier patch from Wesley W. Terpstra.

CC: Wesley W. Terpstra <terpstra@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-30 19:14:27 -08:00
Palmer Dabbelt 5d44bf2065
RISC-V: Remove mem_end command line processing
This is just some cruft left over from before the port converted to
device tree.  The right way to handle memory regions is to specify them
in the device tree, which BBL (our simplest bootloader) is already
capable of doing.  This patch simply removes the cruft.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-30 19:09:53 -08:00
Michael Clark 3e076a7e04
RISC-V: Remove duplicate command-line parsing logic
builtin_cmdline handling is present in drivers/of/fdt.c so the
duplicate logic in arch/riscv/setup.c results in duplication of
the builtin command line. e.g. CONFIG_CMDLINE="root=/dev/vda ro"
gets appended twice and gives "root=/dev/vda ro root=/dev/vda ro"

Before this patch:

[    0.000000] Kernel command line: root=/dev/vda ro root=/dev/vda ro

After this patch:

[    0.000000] Kernel command line: root=/dev/vda ro

Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-30 19:09:52 -08:00
Palmer Dabbelt 27b0174525
RISC-V: Remove unused CONFIG_HVC_RISCV_SBI code
This is code that probably should never have made it into the kernel in
the first place: it depends on a driver that hadn't been reviewed yet.
During the HVC_SBI_RISCV review process a better way of doing this was
suggested, but that means this code is defunct.  It's compile-time
disabled in 4.15 because the driver isn't in, so I think it's safe to
just remove this for now.

CC: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-12-11 07:51:09 -08:00
Olof Johansson 24948b7ec0 RISC-V: Export some expected symbols for modules
These are the ones needed by current allmodconfig, so add them instead
of everything other architectures are exporting -- the rest can be
added on demand later if needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30 10:01:10 -08:00
Olof Johansson 83e7b8769a RISC-V: move empty_zero_page definition to C and export it
Needed by some modules (exported by other architectures).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30 10:01:10 -08:00
Palmer Dabbelt 76d2a0493a RISC-V: Init and Halt Code
This contains the various __init C functions, the initial assembly
kernel entry point, and the code to reset the system.  When a file was
init-related this patch contains the entire file.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26 15:26:44 -07:00