Specification states that DDI_CLK_SEL needs to be mapped to MG clock
even if MG do not exist on EHL, this will ungate those DDIs.
BSpec: 20845
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730175121.16413-1-jose.souza@intel.com
Until Icelake, each engine had its own set of 64 MOCS registers. In
order to simplify, Tigerlake moves to only 64 Global MOCS registers,
which are no longer part of the engine context. Since these registers
are now global, they also only need to be initialized once.
>From Gen12 onwards, MOCS must specify the target cache (3:2) and LRU
management (5:4) fields and cannot be programmed to 'use the value from
Private PAT', because these fields are no longer part of the PPAT. Also
cacheability control (1:0) field has changed, 00 no longer means 'use
controls from page table', but uncacheable (UC).
v2 (Lucas):
- Move the changes to the fault registers to a separate commit - the
old ones overlap with the range used by the new global MOCS
(requested by Daniele)
v3 (Lucas):
- Clarify comment about setting the unused entries to the same value
of index 0, that is the invalid entry (requested by Daniele)
- Move changes to DONE_REG and ERROR_GEN6 to a separate commit
(requested by Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-5-lucas.demarchi@intel.com
The MOCS table is published as part of bspec, and versioned. Entries
are supposed to never be modified, but new ones can be added. Adding
entries increases table version. The patch includes version 1 entries.
Two of the 3 legacy entries used for gen9 are no longer expected to work.
Although we are changing the gen11 table, those changes are supposed to
be backward compatible since we are only touching previously undefined
entries.
v2: Add the missing entries in 49-51 range and replace "HW reserved"
terminology to what it actually is: L1 is implicitly enabled
(from Daniele)
v3: Use a different table for Tiger Lake since entries 0 and 1 are not
the same (from Daniele)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-4-lucas.demarchi@intel.com
The fault registers moved to another offset. The old location is now
taken by the global MOCS registers, to be added in a follow up change.
Based on previous patches by Michel Thierry <michel.thierry@intel.com>.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-2-lucas.demarchi@intel.com
The register we write are not WOPCM regs but uC ones related to how
GuC and HuC are going to use the WOPCM, so it makes logical sense
for them to be programmed as part of uc_init_hw. The WOPCM map on the
other side is not uC-specific (although that is our main use-case), so
keep that separate.
v2: move write_and_verify to uncore, fix log, re-use err_out tag,
add intel_wopcm_guc_base, fix log
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-2-daniele.ceraolospurio@intel.com
When coming out of S3/S4 we sanitize and re-init the HW, which includes
enabling communication during uc_init_hw. We therefore don't want to do
that again in uc_resume and can just tell GuC to reload its state.
v2: split uc_resume and uc_runtime_resume to match the suspend
functions and to better differentiate the expected state in the 2
scenarios (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-1-daniele.ceraolospurio@intel.com
Teach igt_spinner to only use our internal structs, decoupling the
interface from the GEM contexts. This makes it easier to avoid
requiring ce->gem_context back references for kernel_context that may
have them in future.
v2: Lift engine lock to verify_wa() caller.
v3: Less than v2, but more so
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731081126.9139-1-chris@chris-wilson.co.uk
My plan for the future is to have kernel contexts not to have a GEM
context backpointer (as they will not belong to any GEM context). In a
few places, we use ce->gem_context to simply obtain the i915 backpointer,
for which we can use ce->engine->i915 instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730163441.16477-1-chris@chris-wilson.co.uk
Fix build breakage:
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_selftest.h:125:1: error: unknown type name ‘bool’
125 | bool __igt_timeout(unsigned long timeout, const char *fmt, ...);
| ^~~~
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730181759.26162-1-lucas.demarchi@intel.com
Add hotdplug detection for all ports on TGP. icp_hpd_detection_setup()
is refactored to be shared with TGP.
While we increase the number of pins, add a BUILD_BUG_ON() to avoid
going over the number of bits allowed.
v2: use BITS_PER_TYPE and correct type for BUILD_BUG_ON() check
(requested by Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725234813.27179-2-lucas.demarchi@intel.com
Track the currently bound address space used by the HW context. Minor
conversions to use the local intel_context.vm are made, leaving behind
some more surgery required to make intel_context the primary through the
selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730143209.4549-2-chris@chris-wilson.co.uk
We only use the init_context vfunc once while recording the default
context state, and we use the same sequence in each backend (eliding
steps that do not apply). Remove the vfunc for simplicity and
de-duplication.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729113720.24830-1-chris@chris-wilson.co.uk
Throw out our local hacks of header tests now that the more generic
kbuild versions are upstream.
At least for now, continue to keep the header tests behind
CONFIG_DRM_I915_WERROR=y knob.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729140847.18557-1-jani.nikula@intel.com
HuC is usually not a critical component, so we can safely ignore
firmware load or authentication failures unless HuC was explicitly
requested by the user.
v2: add convenient way to disable loading (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729112612.37476-1-michal.wajdeczko@intel.com
As the gen6_ppgtt may refer back to the GGTT for their page-directory
slots, make sure those __i915_vm_release are completed prior to shutting
down the GGTT.
Fixes: b32fa81115 ("drm/i915/gtt: Defer address space cleanup to an RCU worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729132412.23380-1-chris@chris-wilson.co.uk
Smatch spotted that we test at the start of hang_fini for a valid (h->gt
is only set after a request is created) but then used it regardless
later on.
v2: Alternatively, we do not need to check as we now always prime h->gt
in hang_init()
References: cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729085944.2179-1-chris@chris-wilson.co.uk
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:194: warning: Function parameter or member 'i915' not described in 'intel_uc_fw_fetch'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:194: warning: Excess function parameter 'dev_priv' description in 'intel_uc_fw_fetch'
Fixes: 97dee74bb3 ("drm/i915/uc: Reorder params in intel_uc_fw_fetch")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190727101055.5300-1-chris@chris-wilson.co.uk
In GEN 12 PORT_C DDI clk_off bit is not equally distanced to A/B,
it's at offset 24. Similarly TC port (5/6) clk off bits are at
offset 22/23. Extend the macros to cover the additional ports.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-4-lucas.demarchi@intel.com
Bit definitions for port-select got changed for TRANS_CLK_SEL &
TRANS_DDI_FUNC_CTL registers in TGL.
v2 (Lucas):
- Nuke TRANS_DDI_PORT_NONE since it's 0: we are already clearing
{TGL_,}TRANS_DDI_PORT_MASK (suggested by Ville)
- Also cover haswell_get_ddi_port_state() in intel_display.c that was
missing
- Define macros using the _SHIFT macros so we don't lose other users
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-3-lucas.demarchi@intel.com
According to the spec when initializing the display in TGL we should not
set PORT_CL_DW12 for the Aux channel of the combo PHYs. We will re-use the
power well hooks from ICL so only set this register on gen < 12.
v2: Generalize check for gen 12 (suggested by José)
v3: Rebase after enum phy introduction
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-2-lucas.demarchi@intel.com
According to Firmware layout definition, RSA signature is located
after CSS header and uCode so actual RSA offset in the blob can be
easily calculated when needed (and we need it only once).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-3-michal.wajdeczko@intel.com
According to Firmware layout definition, uCode is located right
after CSS header, so ucode offset is always same as header size.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-2-michal.wajdeczko@intel.com
According to Firmware layout definition, CSS header is located
in front of the firmware blob, so header offset is always 0.
Similarly, size of the CSS header is constant and currently
used version is exactly 128.
While here, move type/status enums up and keep them together.
v2: use sizeof consistently (Daniele), update commit message
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-1-michal.wajdeczko@intel.com
Modifying a remote context requires careful serialisation with requests
on that context, and that serialisation requires us to take their
timeline->mutex. Make it so.
Note that while struct_mutex rules, we can't create more than one
request in parallel, but that age is soon coming to an end.
v2: Though it doesn't affect the current users, contexts may share
timelines so check if we already hold the right mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725131447.27515-1-chris@chris-wilson.co.uk
We are already storing runtime value of log level in private
field, so there is no need to modify modparam.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725205106.36148-1-michal.wajdeczko@intel.com
for_each_engine_masked caches the engine mask but what does the caller
know.
Cache it explicitly for clarity and while at it correct the type to match.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725125056.11942-1-tvrtko.ursulin@linux.intel.com
Smatch warning that the loop may be empty causing us to check err before
it had been set. Ensure that it is initialised to 0, just in case.
v2: Refactor the inner loop for better scooping and clarity
Fixes: a9877da2d6 ("drm/i915/oa: Reconfigure contexts on the fly")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726131458.8310-1-chris@chris-wilson.co.uk
guc->stage_desc_pool is required as part of the init parameters and
there is no reason we have to init them after HuC. This fixes a NULL
ptr dereference due to guc->stage_desc_pool not being set (no fixes
tag since GuC submission can't be enabled yet).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725174655.24382-1-daniele.ceraolospurio@intel.com
All intel_uc_fw_* functions are taking uc_fw as first param
except intel_uc_fw_fetch() which is taking i915. Fix that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725210314.21188-1-michal.wajdeczko@intel.com
Currently we use the engine->active.lock to ensure that the request is
not retired as we capture the data. However, we only need to ensure that
the vma are not removed prior to use acquiring their contents, and
since we have already relinquished our stop-machine protection, we
assume that the user will not be overwriting the contents before we are
able to record them.
In order to capture the vma outside of the spinlock, we acquire a
reference and mark the vma as active to prevent it from being unbound.
However, since it is tricky allocate an entry in the fence tree (doing
so would require taking a mutex) while inside the engine spinlock, we
use an atomic bit and special case the handling for i915_active_wait.
The core benefit is that we can use some non-atomic methods for mapping
the device pages, we can remove the slow compression phase out of atomic
context (i.e. stop antagonising the nmi-watchdog), and no we longer need
large reserves of atomic pages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111215
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725223843.8971-1-chris@chris-wilson.co.uk
Generic uc firmware layout definitions are unlikely to change and
are separate to other GuC specific definitions.
v2: reordered
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-3-michal.wajdeczko@intel.com
Sphinx was rendering firmware layout as html table, but since
we want to add sizes relations switch to plain text graphics.
v2: also update text and do it before move (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-2-michal.wajdeczko@intel.com
The way we load the firmwares is the same for both GuC and HuC, the only
difference is in the wopcm destination address and the dma flags, so we
easily can move the logic to a common function and pass in offset and
flags. The only other difference in the uplaod path are some the extra
steps that guc does before and after the xfer, but those don't require
the guc fw to be pinned in ggtt and can safely be performed before
calling the uc_upload function.
Note that this patch re-introduces the dma xfer wait for guc loading that
was removed with "drm/i915/guc: Propagate the fw xfer timeout". This is
not going to slow us down on a successful load (the dma has to complete
before fw init can start), but could slightly increase the timeout in case
of a fw init error.
v2: use _fw variants for uncore accesses (Chris), fix guc_fw status on
failed wait.
v3: use dev_err and print DMA_CTRL (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-9-daniele.ceraolospurio@intel.com
The gt is our new central structure for uc-related code, so we can use
that instead of jumping back to i915 via the fw object. Since we have it
in the upload function it is easy to pass it through the lower levels of
the xfer process instead of continuosly jumping via uc_fw->uc->gt, which
will also make things a bit cleaner for the next patch.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-8-daniele.ceraolospurio@intel.com
The binary is perma-pinned and the rsa is not going to change, so copy
it only once and not on every load.
v2: onion unwind (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-7-daniele.ceraolospurio@intel.com
The way we copy the RSA is the same for GuC and HuC, so we can move the
logic in a common function. this will also make any update needed for
local memory easier.
v2: return the number of copied bytes and check it (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-6-daniele.ceraolospurio@intel.com
We currently track fetch and load status separately, but the 2 are
actually sequential in the uc lifetime (fetch must complete before we
can attempt the load!). Unifying the 2 variables we can better follow
the sequential states and improve our trackng of the uC state.
Also, sprinkle some GEM_BUG_ON to make sure we transition correctly
between states.
v2: rename states, add the running state (Michal), drop some logs in
the fetch path (Michal, Chris)
v3: re-rename states, extend early status check to all helpers (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-5-daniele.ceraolospurio@intel.com
Instead of having 2 identical functions for GuC and HuC firmware
selection, we can unify the selection logic and just use different lists
based on FW type.
Note that the revid is not relevant for current blobs, but the upcoming
CML will be identified as CFL rev 5, so by considering the revid we're
ready for that.
v2: rework blob list defs (Michal), add order check (Chris), fuse GuC
and HuC lists into one.
v3: remove difference between no uC HW and no uC FW, simplify related
selection code, check the whole fw list (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-4-daniele.ceraolospurio@intel.com
There are 2 issues around handling of missing uC support:
- We treat lack of uC HW and lack of uC FW definition as 2 different
cases, but both of them mean that we don't support the uC on the
platform we're running on.
- We rely on the modparam to decide if we can take uC paths or not, but
we don't sanitize it if it is set incorrectly on platform with no uC
support.
To fix both of them, unify the 2 cases in a single one and sanitize the
modparam on invalid configuration (after printing an error message).
The log has been adapted as well, since the user doesn't care why we
don't support GuC/HuC (no HW or no FW), just that we do not. Developers
can easily find the answer based on the platform, so we can simplify the
log.
Correcting the modparam has been preferred over failing the load since
this is what we usually do for non-supported feature (e.g. the now gone
enable_ppgtt would fall back to the highest supported PPGTT mode if the
selected one was not available).
Note that this patch purposely doesn't change the behavior for platforms
that do have uC support, in which case we will still fail if enable_guc
is set and the firmware is not available on the system.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-3-daniele.ceraolospurio@intel.com
We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC
and HAS_HUC, with only 1 exception. Since our HW always has either
both uC or neither of them, just replace all the checks with a unified
HAS_UC.
v2: use HAS_GT_UC (Michal)
v3: fix comment (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com
All the GuC objects are perma-pinned, so their offset can't change at
runtime. We can therefore set (and log!) the parameters only once during
boot.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724085849.18047-1-chris@chris-wilson.co.uk
Fix botched refactoring of the code that uncorrectly split a check on a
bool, treating it as a u32.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 84b1ca2f0e ("drm/i915/uc: prefer intel_gt over i915 in GuC/HuC paths")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723153733.19401-1-daniele.ceraolospurio@intel.com
If the system is already idle, omit the GEM_TRACE saying we are about to
wait for idle. It looks confusing in the logs to see a continual stream
of wait-for-idle, as one immediately assumes it is stuck in a loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091218.5886-1-chris@chris-wilson.co.uk
The microcontrollers are part of GT so it makes logical sense to have
them sanitized at the same time. This also fixed an issue with our
status tracking where the FW load status is not reset around
hibernation.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-2-chris@chris-wilson.co.uk
This was the last place in gt/uc that was still using I915_READ
with the global dev_priv.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-1-chris@chris-wilson.co.uk
To identify the HDCP capability of the display connected to CI
systems, we need to add the hdcp capability probing in i915_display_info.
This will also help to populate the HDCP capability of the CI systems
to CI H/W logs maintained at https://intel-gfx-ci.01.org/hardware/.
It will facilitate to determine the kms_content_protection behavior on
a particular CI system.
v2: Reused the intel_hdcp_info() in i915_hdcp_sink_capability_show(). [Ram]
Shifted intel_hdcp_info() to the end of intel_dp_info. [Ram]
v3: used seq_puts() instead of seq_pritnf(). [Ram]
Cc: daniel.vetter@intel.com
Cc: ramalingam.c@intel.com
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719055513.2089-1-anshuman.gupta@intel.com
Trust that we now have adequate protection over the low level structures
via the engine->active.lock to allow ourselves to capture the GPU error
state without the heavy hammer of stop_machine(). Sadly this does mean
that we have to forgo some of the lesser used information (not derived
from the active state) that is not controlled by the active locks. This
includes the list of buffers in the ppGTT and pinned globally in the
GGTT. Originally this was used to manually verify relocations, but
hasn't been required for sometime and modern mesa now has the habit of
ensuring that all interesting buffers within a batch are captured in their
entirety (that are the auxiliary state buffers, but not the textures).
A useful side-effect is that this allows us to restore error capturing
for Braswell and Broxton.
v2: Use pagevec for a typical arbitrary number of preallocated pages
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722222847.24178-1-chris@chris-wilson.co.uk
Prior to freeing the struct, call the fini function to cleanup the
common members. Currently this only calls the debug functions to mark
the structs as destroyed, but may be extended to real work in future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-2-chris@chris-wilson.co.uk
Remove the outer layer cleanup of engine stubs; as i915_drv itself no
longer tries to preallocate and so is not responsible for either the
allocation or free. By the time we call the cleanup function, we already
have cleaned up the engines.
v2: Lack of symmetry between mmio_probe and mmio_release for handling
the error cleanup. engine->destroy() is a compound function that is
called earlier in the normal release as it ties together other bits of
state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-6-chris@chris-wilson.co.uk
The top-level page directory for 36b is a single entry, not multiple
like 32b. Fix up the rounding on the calculation of the size of the top
level so that we populate the 4th level correctly for 36b.
Reported-by: Jose Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 1eda701eac ("drm/i915/gtt: Recursive cleanup for gen8")
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719130737.5835-1-chris@chris-wilson.co.uk
nouveau:
- bugfixes + TU116 enabling (minor iteration):w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs: fb pitch setup
... plus a new panel quirk
-----BEGIN PGP SIGNATURE-----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=s190
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave is back in shape, but now family got it so I'm doing the pull.
Two things worthy of note:
- nouveau feature pull was way too late, Dave&me decided to not take
that, so Ben spun up a pull with just the fixes.
- after some chatting with the arm display maintainers we decided to
change a bit how that's maintained, for more oversight/review and
cross vendor collab.
More details below:
nouveau:
- bugfixes
- TU116 enabling (minor iteration) :w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs:
- fb pitch setup
core:
- a new panel quirk
- misc fixes"
* tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits)
drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug
drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP
drm/nouveau: fix memory leak in nouveau_conn_reset()
drm/nouveau/dmem: missing mutex_lock in error path
drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau/i2c: Enable i2c pads & busses during preinit
drm/nouveau/disp/tu102-: wire up scdc parameter setter
drm/nouveau/core: recognise TU116 chipset
drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes
drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89.
drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq
drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers
drm/amd/display: Force uclk to max for every state
drm/amdkfd: Remove GWS from process during uninit
drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface
drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware
...
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/icl_dsi.c: In function 'gen11_dsi_set_transcoder_timings':
drivers/gpu/drm/i915/display/icl_dsi.c:768:6: warning:
variable 'hfront_porch' set but not used [-Wunused-but-set-variable]
It is never used and can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719015136.103988-1-yuehaibing@huawei.com
When __gen8_ppgtt_alloc fails without allocating anything
we should not try to call __gen8_ppgtt_clear as there is
nothing to clear and underlying code will complain with:
[ 157.861645] gen8_pd_range:881 GEM_BUG_ON(start >= end)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719153322.10464-1-michal.wajdeczko@intel.com
Since the underlying __gen8_ppgtt_clear takes the shifted address, we
must remember to provide it with the shifted original start address.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719131524.827-1-chris@chris-wilson.co.uk
This reverts commit f774f09649.
If GuC firmware is not present on the filesystem driver crashes the
machine on boot.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190719094845.6242-2-tvrtko.ursulin@linux.intel.com
Access to 0xb100 - 0xb3ff mmio range is controlled by the MCR selector
which only affects CPU MMIO. Therefore these registers cannot be realiably
read with MI_SRM from the command streamer so skip their verification.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-5-tvrtko.ursulin@linux.intel.com
A couple issues were present in this code:
1.
fls() usage was incorrect causing off by one in subslice mask lookup,
which in other words means subslice mask of all zeroes is always used
(subslice mask of a slice which is not present, or even out of bounds
array access), rendering the checks in wa_init_mcr either futile or
random.
2.
Condition in WARN_ON was not correct. It is doing a bitwise and operation
between a positive (present subslices) and negative mask (disabled L3
banks).
This means that with corrected fls() usage the assert would always
incorrectly fail.
We could fix this by inverting the fuse bits in the check, but instead do
one better and improve the code so it not only asserts, but finds the
first common index between the two masks and only warns if no such index
can be found.
v2:
* Simplify check for logic and redability.
* Improve commentary explaining what is really happening ie. what the
assert is really trying to check and why.
v3:
* Find first common index instead of just asserting.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: fe864b76c2 ("drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-4-tvrtko.ursulin@linux.intel.com
Instead of re-calculating the MCR selector in read_subslice_reg do the
rwm on its existing value and restore it when done.
This consolidates MCR programming to one place for cnl+, and avoids
re-calculating its default value on older platforms during hangcheck.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-3-tvrtko.ursulin@linux.intel.com
fls returns bit positions starting from one for the lsb and the MCR
register expects zero based (sub)slice addressing.
Incorrent MCR programming can have the effect of directing MMIO reads of
registers in the 0xb100-0xb3ff range to invalid subslice returning zeroes
instead of actual content.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1e40d4aea5 ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-2-tvrtko.ursulin@linux.intel.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_sprite.c: In function 'g4x_sprite_check_scaling':
drivers/gpu/drm/i915/display/intel_sprite.c:1494:13: warning:
variable 'src_y' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719024100.64738-1-yuehaibing@huawei.com
As we unwind the requests for a preemption event, we return a virtual
request back to its original virtual engine (so that it is available for
execution on any of its siblings). In the process, this means that its
breadcrumb should no longer be associated with the original physical
engine, and so we are forced to decouple it. Previously, as the request
could not complete without our awareness, we would move it to the next
real engine without any danger. However, preempt-to-busy allowed for
requests to continue on the HW and complete in the background as we
unwound, which meant that we could end up retiring the request before
fixing up the breadcrumb link.
[51679.517943] INFO: trying to register non-static key.
[51679.517956] the code is fine but needs lockdep annotation.
[51679.517960] turning off the locking correctness validator.
[51679.517966] CPU: 0 PID: 3270 Comm: kworker/u8:0 Tainted: G U 5.2.0+ #717
[51679.517971] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[51679.518012] Workqueue: i915 retire_work_handler [i915]
[51679.518017] Call Trace:
[51679.518026] dump_stack+0x67/0x90
[51679.518031] register_lock_class+0x52c/0x540
[51679.518038] ? find_held_lock+0x2d/0x90
[51679.518042] __lock_acquire+0x68/0x1800
[51679.518047] ? find_held_lock+0x2d/0x90
[51679.518073] ? __i915_sw_fence_complete+0xff/0x1c0 [i915]
[51679.518079] lock_acquire+0x90/0x170
[51679.518105] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518112] _raw_spin_lock+0x27/0x40
[51679.518138] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518165] i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518199] i915_request_retire+0x43f/0x530 [i915]
[51679.518232] retire_requests+0x4d/0x60 [i915]
[51679.518263] i915_retire_requests+0xdf/0x1f0 [i915]
[51679.518294] retire_work_handler+0x4c/0x60 [i915]
[51679.518301] process_one_work+0x22c/0x5c0
[51679.518307] worker_thread+0x37/0x390
[51679.518311] ? process_one_work+0x5c0/0x5c0
[51679.518316] kthread+0x116/0x130
[51679.518320] ? kthread_create_on_node+0x40/0x40
[51679.518325] ret_from_fork+0x24/0x30
[51679.520177] ------------[ cut here ]------------
[51679.520189] list_del corruption, ffff88883675e2f0->next is LIST_POISON1 (dead000000000100)
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-4-chris@chris-wilson.co.uk
drm-next-5.3-2019-07-18:
amdgpu:
- Navi DC fix for secondary adapters
- Fix Navi flickering with high res panels
- Navi SMU fixes
- Vega20 SMU fixes
- Fixes for audio hotplug on HG systems
- Fix for potential integer overflows on large buffer
migrations
- debugfs fixes for umr
- Various other small fixes
amdkfd:
- Apply noretry setting consistently
- Fix hang in eviction
- Properly clean up GWS on uninit
UAPI:
- clarify a comment on ctx priority
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718211525.3374-1-alexander.deucher@amd.com
Appears to be fixed by "flcn/gp102-: improve implementation of
bind_context() on SEC2/GSP".
Tested on GP10[24678] and GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
fixes bogus values userspace gets from hwmon while the GPU is powered down
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
were simply missing the boiler plate and got caught up in the global update.
Fixes: 96ac6d4351 (treewide: Add SPDX license identifier - Kbuild)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.
Fixes: b24413180f (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:
commit 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")
We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.
This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!
So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Marc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing
graphics/compute bring-up.
Each subsystem was compared with traces, along with various tests to check
that things generally work as they should, and appears compatible enough
with the current TU117 code to enable support.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel
clocks even where they shouldn't be. This leads to a high resolution HDMI
displays, connected via a DVI->HDMI adapter, to fail on the original NV50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Previously center scaling would get scaling applied to it (when it was
only supposed to center the image), and aspect-corrected scaling did not
always correctly pick whether to reduce width or height for a particular
combination of inputs/outputs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Higher layers tend to add a lot of modes not actually in the EDID, such
as the standard DMT modes. Changing this would be extremely intrusive to
everyone, so just force the scaler more often. There are no practical
cases we're aware of where a LVDS/eDP panel has multiple resolutions
exposed, and i915 already does it this way.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fix a crash or broken depth testing in all OpenGL applications that use the
depth buffer on MCP89 (GeForce 320M) seen on a MacBook Pro Late 2010.
The bug is tracked in https://bugs.freedesktop.org/show_bug.cgi?id=108500
Signed-off-by: Timo Wiren <timo.wiren@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A single 32-bit PSR2 training pattern field follows the sixteen element
array of PSR table entries in the VBT spec. But, we incorrectly define
this PSR2 field for each of the PSR table entries. As a result, the PSR1
training pattern duration for any panel_type != 0 will be parsed
incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb
version >= 226 will also be wrong.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org #v5.2
Fixes: 88a0d9606a ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: François Guerraz <kubrick@fgv6.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717223451.2595-1-dhinakaran.pandiyan@intel.com
[WHY] dc sw clock implementation of navi10 and raven are not exact the
same. dcccg, dchub reference clock initialization is done after dc calls
vbios dispcontroller_init table. for raven family, before
dispcontroller_init is called by dc, the ref clk values are referred
by sw clock implementation and program asic register using wrong
values. this causes dchub pstate error. This need provide valid ref
clk values. for navi10, since dispcontroller_init is not called,
dchubbub_global_timer_enable = 0, hubbub2_get_dchub_ref_freq will
hit aeert. this need remove hubbub2_get_dchub_ref_freq from this
location and move to dcn20_init_hw.
[HOW] for all asic, initialize dccg, dchub ref clk with data from
vbios firmware table by default. for raven asic family, use these data
from vbios, for asic which support sw dccg component, like navi10,
read ref clk by sw dccg functions and update the ref clk.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dpm sensor function already does this for us. This fixes
the freq*_input files with the new SMU implementation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Workaround for now to avoid underflow.
The uclk switch time should really be bumped up to 404, but doing so
would expose p-state hang issues for higher bandwidth display
configurations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As recently disovered by forcing big-core (!llc) machines to use the GTT
paths, we need our full GTT write flush before manipulating the GTT PTE
or else the writes may be directed to the wrong page.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145407.21352-2-chris@chris-wilson.co.uk
On VLV/CHV there is some kind of linkage between the cdclk frequency
and the DP link frequency. The spec says:
"For DP audio configuration, cdclk frequency shall be set to
meet the following requirements:
DP Link Frequency(MHz) | Cdclk frequency(MHz)
270 | 320 or higher
162 | 200 or higher"
I suspect that would more accurately be expressed as
"cdclk >= DP link clock", and in any case we can express it like
that in the code because of the limited set of cdclk (200, 266,
320, 400 MHz) and link frequencies (162 and 270 MHz) we support.
Without this we can end up in a situation where the cdclk
is too low and enabling DP audio will kill the pipe. Happens
eg. with 2560x1440 modes where the 266MHz cdclk is sufficient
to pump the pixels (241.5 MHz dotclock) but is too low for
the DP audio due to the link frequency being 270 MHz.
v2: Spell out the cdclk and link frequencies we actually support
Cc: stable@vger.kernel.org
Tested-by: Stefan Gottwald <gottwald@igel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson