Commit Graph

31 Commits

Author SHA1 Message Date
Michal Kazior 9936194437 ath10k: sanitize tx ring index access properly
The tx ring index was immediately trimmed with a
bitmask. This discarded the 0xFFFFFFFF error case
(which theoretically can happen when a device is
abruptly disconnected) and led to using an invalid
tx ring index. This could lead to memory
corruption.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-07-15 11:19:45 +03:00
Michal Kazior 08b8aa0931 ath10k: abort incomplete scatter-gather pci tx properly
This prevents leaving incomplete scatter-gather
transfer on CE rings which can lead firmware to
crash.

Reported-By: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27 12:32:10 +03:00
Michal Kazior 25d0dbcbd5 ath10k: split ce initialization and allocation
Definitions by which copy engine structure are
allocated do not change so it doesn't make much
sense to re-create those structures each time
device is booted (e.g. due to firmware recovery).

This should decrease chance of memory allocation
failures.

While at it remove per_transfer_context pointer
indirection. The array has been trailing the copy
engine ringbuffer structure anyway. This also
saves pointer size worth of bytes for each copy
engine ringbuffer.

Reported-By: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28 14:32:10 +02:00
Michal Kazior 68c03249f3 ath10k: convert pci_alloc_consistent() to dma_alloc_coherent()
This allows to use GFP_KERNEL allocation. This
should decrease chance of allocation failure, e.g.
during firmware recovery.

Reported-By: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28 14:32:01 +02:00
Michal Kazior a16942e630 ath10k: bypass htc for htt tx path
Going through full htc tx path for htt tx is a
waste of resources. By skipping it it's possible
to easily submit scatter-gather to the pci hif for
reduced host cpu load and improved performance.

The new approach uses dma pool to store the
following metadata for each tx request:
 * msdu fragment list
 * htc header
 * htt tx command

The htt tx command contains a msdu prefetch.
Instead of copying it original mapped msdu address
is used to submit a second scatter-gather item to
hif to make a complete htt tx command.

The htt tx command itself hands over dma mapped
pointers to msdus and completion of the command
itself doesn't mean the frame has been sent and
can be unmapped/freed. This is why htc tx
completion is skipped for htt tx as all tx related
resources are freed upon htt tx completion
indication event (which also implicitly means htt
tx command itself was completed).

Since now each htt tx request effectively consists
of 2 copy engine items CE_HTT_H2T_MSG_SRC_NENTRIES
is updated to allow maximum of
TARGET_10X_NUM_MSDU_DESC msdus being queued. This
keeps the tx path resource management simple.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28 11:59:17 +02:00
Michal Kazior 726346fc71 ath10k: replace send_head() with tx_sg()
PCI is capable of handling scatter-gather lists.
This can be used to avoid copying memory.

Change the name of the callback while at to
reflect its purpose.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28 11:59:06 +02:00
Michal Kazior 5d1aa94680 ath10k: defer irq registration until hif start()
It's impossible to rely on disable_irq() and/or CE
interrupt masking with legacy shared interrupts.
Other devices sharing the same irq line may assert
it while ath10k is doing something that requires
no interrupts.

Irq handlers are now registered after all
preparations are complete so spurious/foreign
interrupts won't do any harm. The handlers are
unregistered when no interrupts are required (i.e.
during driver teardown).

This also removes the ability to receive FW early
indication (since interrupts are not registered
until early boot is complete). This is not mission
critical (it's more of a hint that early boot
failed due to unexpected FW crash) and will be
re-added in a follow up patch.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-27 16:45:32 +02:00
Michal Kazior 98563d5aaf ath10k: re-arrange PCI init code
This patch moves irq registering after necessary
structures have been allocated and initialized.
This should prevent interrupts from causing
tasklet access invalid memory pointers.

Reported-By: Ben Greear <greearb@candelatech.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12 20:06:46 +02:00
Michal Kazior 28642f4281 ath10k: propagate ath10k_ce_disable_interrupts() errors
This shouldn't be silenced. This will be necessary
for PCI init code reordering.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12 20:06:45 +02:00
Michal Kazior 1d34902192 ath10k: fix ath10k_ce_init() failpath
Make sure to put target back to sleep. This was a
minor issue as it didn't really matter if we put
target back to sleep at this point. It just looked
wrong.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12 20:06:45 +02:00
Michal Kazior 93e0daa0ee ath10k: make sure to mask all CE irqs
CE error interrupts were not disabled. This could
lead to invalid memory accesses / memory
corruption.

Also make sure CE watermark interrupts are also
disabled.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12 20:06:45 +02:00
Michal Kazior fad6ed7867 ath10k: remove ar_pci->ce_count
It wasn't really useful to have it to begin with.
This makes it a little simpler to re-arrange PCI
init code as some function depended on
ar_pci->ce_count being set.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12 20:06:44 +02:00
Michal Kazior 60f85bea25 ath10k: fix FW crashes on heavy TX on 10.1.389 AP FW
10.1.389 firmware has some differences in
calculation of number of outstanding HTT TX
completions. This led to FW crashes of 10.1.389
while main firmware branch was unnaffected.

The patch makes sure ath10k doesn't queue up more
MSDUs than it should.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-21 16:41:19 +03:00
Michal Kazior 3efcb3b40c ath10k: remove num_sends_allowed
The value provided by num_sends_allowed is now
derived from CE source ringbuffer state.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07 15:28:02 +03:00
Michal Kazior 2e761b5a52 ath10k: remove ce_sendlist_send
It is completely pointless to keep this function
around. It doesn't do anything different than
ce_send except it introduces more overhead.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07 15:28:02 +03:00
Kalle Valo e9bb0aa39b ath10k: delete struct ce_sendlist
struct ce_sendlist is useless as we always add just one buffer onto it.
And most importantly, it's ugly as it doesn't use skb properly.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-12 19:20:30 +03:00
Kalle Valo 24cfade11e ath10k: add boot debug messages to pci.c and ce.c
To unify all boot related debug messages into one debug
level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-12 18:21:37 +03:00
Michal Kazior 5440ce2537 ath10k: prevent CE from looping indefinitely
The double while() could end up running forever.
Inner while() would complete very fast. However
the completion processing could take enough time
for more completions to flow in. In that case the
outer while() would not terminate and run again,
and again. This could happen especially on a slow
host system.

This could lead to a system freeze during heavy
traffic. Note: this doesn't solve all known
starvation issues yet.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-08 17:59:32 +03:00
Kalle Valo e9780367b0 ath10k: simplify ath10k_ce_init() wake up handling
ath10k_ce_init() and the functions it calls wakeup
the chip multiple times. Simplify that to call
ath10k_pci_wake() only once. This also makes it
easier to add error handling when wakeup fails.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-03 09:49:08 +03:00
Kalle Valo 3aebe54b1c ath10k: convert ath10k_pci_wake() to return
We should not try to access hw if wakeup fails so add
proper error checking for that. Also add the timeout lenght
to the warning message.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-03 09:49:08 +03:00
Kalle Valo a40d3e420d ath10k: clean up ath10k_ce_completed_send_next_nolock()
The error handling was just weird, simplify it.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-03 09:49:07 +03:00
Michal Kazior d21fb959d1 ath10k: rename ce_ring_state to ath10k_ce_ring
The new naming makes more sense.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-01 09:28:47 +03:00
Michal Kazior 2aa3911573 ath10k: rename ce_state to ath10k_ce_pipe
The new naming makes more sense.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-01 09:27:50 +03:00
Michal Kazior 774c7e8c2b ath10k: remove ce_op_state
It was only written to and never read back. No use
to keep it around.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-01 09:27:49 +03:00
Michal Kazior 39e4086a73 ath10k: use inline ce_state structure
Simplifies memory managament of ce_state.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-01 09:21:45 +03:00
Michal Kazior ba7ee55f8c ath10k: print errcode when CE ring setup fails
This makes it possible to see the reason why the
setup fails. It also adheres to code style of
error checking in ath drivers.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14 18:00:01 +03:00
Janusz Dziedzic 9c5ae6915d ath10k: check allocation errors in CE
Handle pci_alloc_consistent(), kmalloc()
errors in copy engine module.
Found during code review.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-13 17:39:01 +03:00
Bartosz Markowski 57a8930aec ath10k: Remove qca98xx hw1.0 support
Since the firmware support is no longer available for hw1.0,
drop all code (especially workarounds) for those units.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-12 17:21:38 +03:00
Michal Kazior 432358ed1d ath10k: prevent using invalid ringbuffer indexes
If the device is removed and hotplug fails
ioread32() will return 0xFFFFFFFF. In that case
reading ringbuffer during device bringup led to
out-of-bounds addressing of a ringbuffer array
that in turn led to a paging failure.

This could be reproduced by the following:
 * boot without acpi/prevent hotplug from working
 * insert and manually detect (pci rescan) the device
 * remove the device physically
 * load ath10k driver
 * kernel crashed

Ringbuffer index reading is now protected by using
an appropriate mask to prevent addressing an
invalid array index.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-02 09:37:28 +03:00
Michal Kazior cba4ca7553 ath10k: fix typo in define name
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-07-30 18:01:16 +03:00
Kalle Valo 5e3dd157d7 ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices
Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices.
A major difference from ath9k is that there's now a firmware and
that's why we had to implement a new driver.

The wiki page for the driver is:

http://wireless.kernel.org/en/users/Drivers/ath10k

The driver has had many authors, they are listed here alphabetically:

Bartosz Markowski <bartosz.markowski@tieto.com>
Janusz Dziedzic <janusz.dziedzic@tieto.com>
Kalle Valo <kvalo@qca.qualcomm.com>
Marek Kwaczynski <marek.kwaczynski@tieto.com>
Marek Puzyniak <marek.puzyniak@tieto.com>
Michal Kazior <michal.kazior@tieto.com>
Sujith Manoharan <c_manoha@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00