Commit Graph

25733 Commits

Author SHA1 Message Date
Linus Torvalds 3e0777b8fa Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manually
Some manual fixups required due to clashes with the PF_FREEZE cleanups.
2005-06-27 14:47:31 -07:00
Alan Stern 0ed0c0c48c [PATCH] USB: usbcore: inverted test for resuming interfaces
This one-liner fixes a test for interfaces that are already resumed.

It would be nice if this could get into 2.6.12, but it's not critical
since it only affects people doing selective (runtime) suspend/resume.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:05 -07:00
David Brownell 822e14ac22 [PATCH] USB: resolve ethernet gadget build glitch on pxa
This fixes a build error on pxa25x processes with pxa2xx_udc and

        CONFIG_USB_ETH=m
        # CONFIG_USB_ETH_RNDIS is not set

The error is because on that CPU there's no status transfer support
except with RNDIS.  Workaround, enable the RNDIS support too.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:04 -07:00
David Brownell e3bc8b4e00 [PATCH] USB: usbnet debug message fix
One debug message won't print the right value; OSDL bugid 4545.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:04 -07:00
Matthew Dharm 86dbde9cbd [PATCH] USB Storage: retry hard errors
This patch started life as as527, and was rediffed by me.

Since the IDE interface doesn't convey much information about types of
errors, many USB-IDE adapters report all low-level errors with SK = 0x04,
which is supposed to be used only for non-recoverable errors.  As a result
the SCSI midlayer doesn't retry the command.  But quite often a retry
would succeed, whereas an unnecessary retry doesn't really hurt anything.

This patch uses a recently-implemented flag to tell the SCSI midlayer that
such hardware errors should be retried.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:03 -07:00
Matthew Dharm 4d07ef762f [PATCH] USB Storage: port reset on transport error
This patch causes a port reset whenever there's a transport error or abort.
If that fails it reverts back to doing a mass-storage device reset.  It
started life as as497 and was rediffed by me.

This makes error recovery a lot quicker and more reliable.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:03 -07:00
Matthew Dharm 5203ad4413 [PATCH] USB Storage: endpoint toggles and reset delays
This patch does two things to help reset recovery.  It started life as
as496 and was rediffed by me.

First, the patch checks the result of a CLEAR_HALT request and doesn't reset the
endpoint's data toggle unless the request succeeded.

Second, it reduces the timeout for a device reset from 20 seconds to 5
seconds.

If all goes well, then I've finally figured quilt out and this patch should
apply cleanly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:02 -07:00
Domen Puncer 01205a0e60 [PATCH] USB: usblp: 2x up() in usblp_read
up(&usblp->sem) was called twice in a row in this code path.

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:02 -07:00
Vincent Vanackere c11372da33 [PATCH] USB: fix atiremote input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
> On Sun, Apr 10, 2005 at 07:21:28PM +0600, Viktor A. Danilov wrote:
> >
> > PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
> > REASON: `dev` - field not filled...
> > SOLUTION: in linux/drivers/usb/input/aiptek.c write
> >       aiptek->inputdev.dev = &intf->dev;
> > before calling
> >       input_register_device(&aiptek->inputdev);

The following (tested) patch fixes the exact same issue with the ATI
Remote input driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:02 -07:00
Kiril Jovchev 1636787794 [PATCH] USB: add support for Creative WebCam mini to stv680 driver
Added support for Creative WebCam Go Mini.
Camera has STV680 chip and just different Product ID(0x4007) and Vendor ID (0x041e).

Signed-off-by: Kiril Jovchev <jovchev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:01 -07:00
C. Adam Oldham 2c45b6feb3 [PATCH] USB: Fix race condition in usblp_write
Initialize status fields in the read and write urbs to prevent a race
condition with open/read/close - open/write/close sequences.

Fixes bug #4432 at bugzilla.kernel.org

Signed-off-by: Adam Oldham <oldhamca@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:01 -07:00
David Brownell 77078570ab [PATCH] USB: ehci-hcd - fix page pointer allocation in itd_patch()
The itd_patch() function is responsible for allocating entries in the
buffer page pointer list of the iTD.  Particularly, a new page pointer
is needed every time when buffer data crosses a page boundary.

However, there is a bug in the allocation logic: the function does not
allocate a new entry when the current transaction is the first
transaction in the iTD (as indicated by first!=0).

The consequence is that, when the data of the first transaction begins
somewhere at the end of a page so that it actually does cross the page
boundary, no new page pointer is allocated.  This means that the data
at the end of the first transaction (beyond the page boundary) will be
accessed by the HC using the second page pointer, which is zero.
Furthermore, the first page pointer will be later overwritten by the
page pointers of the other transactions, which will garble it because
the value is or-ed into the iTD field.

All this particular check (for !first) does is cause incorrect
behaviour, so it should be entirely removed (and with it the variable
first that is not used for anything else).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:00 -07:00
Alan Stern e07fefa6b2 [PATCH] USB UHCI: Detect invalid ports
This patch changes the way uhci-hcd detects valid ports.  The
specification doesn't mention any way to find out how many ports a
controller has, so the driver has to use some heuristics, reading the port
status and control register and deciding whether the value makes sense.
With this patch the driver will recognize a typical failure mode (all bits
set to one) for nonexistent ports and won't assume there are always at
least 2 ports -- such an assumption seems silly if the heuristics have
already shown that the ports don't exist.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:00 -07:00
David Brownell 486e2df6ce [PATCH] USB gadget: drain rndis response queue on disconnect
Drain the rndis response queue on disconnect.  This fixes a problem
in which an rndis response left in the queue from a previous session
could cause a subsequent session to fail.

Signed-off-by: Andy Lowe <alowe@mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:44:00 -07:00
David Brownell 45e45ab45c [PATCH] USB: fix drivers/usb/gadget/ether.c compile error
This fixes a compile glitch with CONFIG_USB_ETH_RNDIS disabled, and
replaces some inline #ifdeffery (and other code) with inline functions
which can evaluate to constants.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:59 -07:00
Alan Stern 391eca9d88 [PATCH] USB: dummy_hcd: add suspend/resume support
This patch adds support to dummy_hcd for suspending and resuming the root
hub and the emulated platform devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:59 -07:00
Alan Stern cc095b0b5b [PATCH] USB: dummy_hcd: sparse cleanups
This patch fixes the byte-ordering issue for setup packets in the
dummy_hcd driver and cleans up a few things that sparse -Wbitwise
dislikes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:59 -07:00
Duncan Sands f070693009 [PATCH] USB: usbatm kcalloc cleanup
you seem to have applied the original, not the new improved one with
whiter teeth that uses kcalloc instead of kmalloc + memset.  Here's a
patch that goes on top of the one you applied.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:58 -07:00
Andrew Morton 843c944fb8 [PATCH] USB: fix usbatm gcc-2.95.x bug
Work around the gcc-2.95.x macro expansion bug.

Cc: Duncan Sands <baldrick@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:58 -07:00
Duncan Sands 65412e48e2 [PATCH] USB ATM: avoid oops on bind failure; plug memory leak
Zero the entire instance, not just the struct usbatm_data head.
Make sure the just allocated urb is freed if we fail to allocate
a buffer.  Based on a patch by Stanislaw W. Gruszka.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:58 -07:00
Duncan Sands e20d6645f7 [PATCH] USB ATM: reduce log spamming
Reduce the number of "unknown vpi/vci" debug messages to (usually) at most
one per-urb, rather than one per-cell.  This is only an issue when (a) many
packets come in but no connection is open; and (b) CONFIG_USB_DEBUG is set.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:57 -07:00
Duncan Sands 86699e3592 [PATCH] USB ATM: bits and bobs
Makefile and Kconfig entries for the new drivers.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:57 -07:00
Duncan Sands 0bb3cf37df [PATCH] USB ATM: generic DSL modem driver xusbatm
Doesn't do any firmware loading etc, just transmission and reception.
The user needs to take care of modem initialization, and load the
module with parameters giving the endpoints to use and so forth.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:57 -07:00
Duncan Sands 1b0e614652 [PATCH] USB ATM: driver for the Conexant AccessRunner chipset cxacru
Driver for modems based on the Conexant AccessRunner chipset.
Original patch by Josep Comas, much reworked by Roman Kagan.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:56 -07:00
Duncan Sands 48da7267ff [PATCH] USB ATM: port speedtch to new usbatm core
Port the speedtch driver to the new usbatm core.  The code is much
the same as before, just reorganized, though I threw in some minor
improvements (a new module parameter for choosing the altsetting,
more robust urb failure handling, ...) while I was there.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:56 -07:00
Andrew Morton 9574507c98 [PATCH] USB: fix speedtch.c merge with next patch.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:55 -07:00
Duncan Sands c59bba75fa [PATCH] USB ATM: new usbatm core
Rework the core usbatm code: minidrivers (i.e. drivers for particular
modems) now register themselves with the usbatm core, supplying methods
for binding/unbinding etc.  The design was inspired by usb-serial and
usbnet.  At the same time, more common code from the speedtch and
cxacru (patch 3/5) drivers was generalized and moved into the core.  The
transmission and reception parts have been unified and simplified.  Since
this is a major change and I don't like underscores in file names,
usb_atm.[ch] has been renamed usbatm.[ch].

Many thanks to Roman Kagan, who did a lot of the coding.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:55 -07:00
David Brownell d49d431744 [PATCH] USB: misc ehci updates
Various minor EHCI updates

   * Dump some more info in the debug dumps, notably the product
     description (e.g. chip vendor), BIOS handhake flags, and
     debug port status (when it's not managed by the HCD).

   * Minor updates to the BIOS handoff code:  always flag the HCD
     as owned by Linux (in case BIOS doesn't grab it "early"),
     and on the buggy-BIOS path always match the "early handoff"
     code and forcibly disable SMI IRQs.

   * For the disabled 64bit DMA support, there's now a constant
     to use for the mask; use it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:55 -07:00
David Brownell 9198769363 [PATCH] USB: pxa2xx_udc updates
This has several small updates to the px2xx UDC driver:

  * small fixes from Eugeny S. Mints <emints@ru.mvista.com>
     - local_irq_save() around potential endpoint disable race
     - fix handling of enqueue to OUT endpoints (potential oops)
  * add shutdown() method to disable any D+ pullup
  * rename methods accessing raw signals, referencing the signals
  * describes itself as for "pxa25x", since pxa27x is different

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:54 -07:00
David Brownell 988199fe34 [PATCH] USB: goku_udc updates (sparse, SETUP api change)
Sparse updates; and the API change for SETUP packets being in USB byteorder.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:54 -07:00
David Brownell 320f34595c [PATCH] USB: net2280 updates (sparse, SETUP api change)
This is mostly "sparse" related updates, one of which was a missing
le32_to_cpu() should have affected big-endian hardware.

Notable is the API change:  setup packets are now provided in USB
byte order.  This affects only big-endian hardware, and the gadget
drivers have been updated in a separate patch.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:54 -07:00
David Brownell 1bbc169621 [PATCH] USB: gadget driver updates (SETUP api change)
This updates most of the gadget framework to expect SETUP packets use
USB byteorder (matching the annotation in <linux/usb_ch9.h> and usage
in the host side stack):

  - definition in <linux/usb_gadget.h>
  - gadget drivers:  Ethernet/RNDIS, serial/ACM, file_storage, gadgetfs.
  - dummy_hcd

It also includes some other similar changes as suggested by "sparse",
which was used to detect byteorder bugs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:53 -07:00
David Brownell 028b271b68 [PATCH] USB: Kconfig fixes for usb/gadget
This prevents gadget drivers from being selected when no controller has
been selected, by adding an additional boolean and depending on it.
It's mostly to help "allmodconfig".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:53 -07:00
Florian Echtler 4244f72436 [PATCH] USB: upgrade of the idmouse driver
Signed-off-by: Florian Echtler  <echtler@fs.tum.de>
Signed-off-by: Andreas Deresch <aderesch@fs.tum.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:53 -07:00
Alan Stern 685eb93f08 [PATCH] USB dummy_hcd: Use root-hub interrupts instead of polling
This patch makes the dummy_hcd driver use emulated root-hub interrupts
instead of polling.  It's in the spirit of similar changes being made to
the other HCDs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:52 -07:00
Alan Stern f1c39fad7d [PATCH] USB dummy_hcd: Centralize link state computations
This patch adds to the dummy_hcd driver a new routine for keeping track of
all changes in the state of the emulated USB link.  The logic is now kept
in one spot instead of spread around, and it's easier to verify and
update the code.  The behavior of the port features has been corrected in
a few respects as well (for instance, if the POWER feature is clear then
none of the other features can be set).

Also added is support for the (relatively new) _connect() and
_disconnect() calls of the Gadget API.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:52 -07:00
Alan Stern d9b762510c [PATCH] USB dummy_hcd: Use separate pdevs for HC and UDC
This patch makes the dummy_hcd driver create separate platform devices for
the emulated host controller and emulated device controller.  This gives a
more accurate simulation and will permit testing of situations where only
one of the two devices is suspended.

This also changes the name of the host controller platform device to match
the name of the driver.  That way the normal platform bus probe mechanism
will handle binding the driver to the device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:52 -07:00
Alan Stern c2db8b5e56 [PATCH] USB: dummy_hcd: USB_PORT_FEAT changed to USB_PORT_STAT
This patch makes some cosmetic changes to dummy_hcd:

	Minor alterations of comments and whitespace.

	Replace USB_PORT_FEAT_xxx with USB_PORT_STAT_xxx.  This is
	appropriate as the values are stored in a status variable
	and they aren't feature indices.  Also it allows the
	elimination of a bunch of awkward bit shift operations.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:51 -07:00
Alan Stern 5742b0c950 [PATCH] USB dummy_hcd: Partial OTG emulation
Partial OTG support for dummy_hcd, mostly as a framework for further work.
It emulates the new OTG flags in the host and peripheral frameworks, if
that option is configured.  But it's incomplete:

  - Resetting the peripheral needs to clear the OTG state bits;
    a second enumeration won't work correctly.

  - This stops modeling HNP right when roles should switch the first time.
    It should probably disconnect, then set the usb_bus.is_b_host and
    usb_gadget.is_a_peripheral flags; then it'd enumerate almost normally,
    except for the role reversal.  Roles could then switch a second time,
    back to "normal" (with those flags cleared).

  - SRP should be modeled as "resume from port-unpowered", which is
    a state that usbcore doesn't yet use.

HNP can be triggered by enabling the OTG whitelist and configuring a
gadget driver that's not in that list; or by configuring Gadget Zero
to identify itself as the HNP test device.

Sent-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:51 -07:00
David Brownell 65111084c6 [PATCH] USB: more omap_udc updates (dma and omap1710)
More omap_udc updates:

  * OMAP 1710 updates
      - new UDC bit for clearing endpoint toggle, affecting CLEAR_HALT
      - new OTG bits affecting wakeup
  * Fix the bug Vladimir noted, that IN-DMA transfer code path kicks in
    for under 1024 bytes (not "up to 1024 bytes")
  * Handle transceiver setup more intelligently
      - use transceiver whenever one's available; this can be handy
        for GPIO based, loopback, or transceiverless configs
      - cleanup correctly after the "unrecognized HMC" case
  * DMA performance tweaks
      - allow burst/pack for memory access
      - use 16 bit DMA access most of the time on TIPB
  * Add workarounds for some DMA errata (not observed "in the wild"):
      - DMA CSAC/CDAC reads returning zero
      - RX/TX DMA config registers bit 12 always reads as zero (TI patch)
  * More "sparse" warnings removed, notably "changing" the SETUP packet
    to return data in USB byteorder (an API change, null effect on OMAP
    except for these warnings).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:50 -07:00
David Brownell 907cba35f7 [PATCH] USB: ethernet gadget updates (mostly cleanup)
Some cleanup for the the Ethernet part of the Ethernet/RNDIS gadget driver:

  - Remove remnants of ancient endpoint init logic; this is simpler, clearer

  - Save a smidgeon of space in the object file

  - Get rid of some #ifdeffery, mostly by using some newish inlines

  - Reset more driver state as part of USB reset

  - Remove a needless wrapper around an RNDIS call

  - Improve and comment the status interrupt handling:
      * RNDIS sometimes needs to queue these transfers (rarely in normal
        cases, but reproducibly while Windows was deadlocking its USB stack)
      * Mark requests as busy/not

  - Enable the SET_NETDEV_DEV() call; sysfs seems to behave sanely now

This is a net shrink of source code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:50 -07:00
David Brownell 340600ab4c [PATCH] USB: rndis updates (mostly cleanup)
Some bugfixes and lots of cleanup (net code shrink):

  - On reset, force the RNDIS state machine its initial state

  - Hook up the RNDIS (outgoing) filters to the CDC mechanism

  - Lots of cleanup:
     * Eliminate duplicate copy of OID table;
     * Unify handlying of the OID "query" response data pointer;
     * Reduce code duplication for calculating query response lengths;
     * Remove some checks for "can't happen" errors;
     * Get rid of debugging #ifdefs by making the debug flag an integer level

Most of the patch, by volume, relates to those query response cleanups.
It incidentally shaves off a few hundred bytes of object code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:50 -07:00
Alan Stern 247f310563 [PATCH] USB HCDs: no longer need to register root hub
This patch changes the host controller drivers; they no longer need to
register their root hubs because usbcore will take care of it for them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:49 -07:00
Alan Stern 8ec8d20b21 [PATCH] usbcore: register root hub in usb_add_hcd
This patch makes usbcore automatically allocate and register the root hub
device for a new host controller when the controller is registered.  This
way the HCDs don't all have to include the same boilerplate code.  As a
pleasant side benefit, the register_root_hub routine can now be made
static and not EXPORTed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:49 -07:00
Alan Stern bc96c0ad1e [PATCH] ohci-omap, sl811, dummy: remove hub_set_power_budget
This patch changes the HCDs that used the old hub_set_power_budget call,
making them use the new hcd->power_budget field instead.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:49 -07:00
Alan Stern 2532178a68 [PATCH] UHCI: Don't store device pointer in QH or TD
This patch simplifies the uhci-hcd driver by removing the device pointer
currently stored in the QH and TD structures.  Those pointers weren't
being used for anything other than to increment the device's reference
count, which is unnecessary since the device is used only when an URB
completes, and outstanding URBs take their own reference to the device.
As a useful side effect, this change means that uhci-hcd no longer needs
to have the root-hub device available in the start routine.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:48 -07:00
Alan Stern 7d35b92985 [PATCH] usbcore: Remove hub_set_power_budget
This patch removes the hub_set_power_budget routine, which was used by a
couple of HCDs to indicate that the root hub was running on battery power.
In its place is a new field added to struct usb_hcd, which HCDs can set
before the root hub is registered.  Special-case code in the hub driver
knows to look at this field when configuring a root hub.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:48 -07:00
Colin Leroy f58f97fa9d [PATCH] USB: check for device in zd1201_resume
My patch adding PM support for zd1201 didn't check for the device on
resume, which can oops if the device has been removed.

This patch fixes it.

Signed-off-by: Colin Leroy <colin@colino.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:47 -07:00
Colin Leroy a3c900bb8c [PATCH] USB: PM support for zd1201
This patch enables power management (suspend, resume) support for zd1201.
It fixes problems after wakeup for me, but these problems did not appear
everytime without this patch.  it's a bit empirical, based on what the
usbnet does, so maybe not correct...  Maybe someone can give it a look
before it's applied.

Signed-off-by: Colin Leroy <colin@colino.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:47 -07:00
Greg Kroah-Hartman 507ca9bc04 [PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.
This removes a lot of racy and buggy code by trying to check the status of the urb.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:47 -07:00
David Brownell f4df0e334a [PATCH] USB: add reboot notifier to ohci
Adds a reboot notifier to OHCI, mostly to benefit kexec; plus
minor #include tweaks.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:46 -07:00
David Brownell ff7c79e4f3 [PATCH] USB: usbtest updates
Updates to "usbtest" driver:

  * Improve some diagnostics.  One path that never generated diagnostics
    before should now generate two ... unless you hit a GCC bug that
    all my compilers seem to have, go figure.

  * Add suspend/resume support, so this behaves when the Linux host
    being used for testing suspends.

  * Don't test the "zero byte ep0 read" case unless real-world relevance
    for the testing is is irrelevant.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:46 -07:00
Oliver Neukum 884b600f63 [PATCH] USB: fix acm trouble with terminals
This patch fixes lost LF when ACM device is used with getty/login/bash,
in case of a modem which takes calls.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:45 -07:00
Alan Stern d5926ae7a8 [PATCH] usbcore support for root-hub IRQ instead of polling
This is a revised version of an earlier patch to add support to usbcore
for driving root hubs by interrupts rather than polling.

There's a temporary flag added to struct usb_hcd, marking devices whose
drivers are aware of the new mechanism.  By default that flag doesn't get
set so drivers will continue to see the same polling behavior as before.
This way we can convert the HCDs one by one to use interrupt-based event
reporting, and the temporary flag can be removed when they're all done.

Also included is a small change to the hcd_disable_endpoint routine.
Although endpoints normally shouldn't be disabled while a controller is
suspended, it's legal to do so when the controller's driver is being
rmmod'ed.

Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs
where the root hub's port-change interrupts are level-triggered rather
than edge-triggered.  The callback is invoked each time khubd has finished
processing a root hub, to let the HCD know that the interrupt can safely
be re-enabled.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:45 -07:00
Alan Stern 02597d2dee [PATCH] USB UHCI: Add shutdown method
After all the discussion you might not be interested in this still, but
nevertheless here it is.  This patch adds a shutdown method to the
uhci-hcd driver.  Its prerequisite is the patch you wrote adding shutdown
support for PCI.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:45 -07:00
Alan Stern c074b416b9 [PATCH] USB UHCI: improved reset handling
This patch improves the strategy uhci-hcd uses for performing controller
resets and checking whether they are needed.

	The HCRESET command doesn't affect the Suspend, Resume,
	or Reset bits in the port status & control registers, so
	the driver must clear them by itself.  This means the
	code to figure out how many ports there are has to be moved
	to an earlier spot in the driver.

	The R/WC bits in the USBLEGSUP register can be set by the
	hardware even in the absence of BIOS meddling with legacy
	support features.  Hence it's not a good idea to check them
	while trying to determine whether the BIOS has altered the
	controller's state.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:44 -07:00
Alan Stern 6c1b445c22 [PATCH] USB UHCI: Use root-hub IRQs while suspended
This patch, which has as478b as a prerequisite, enables the uhci-hcd
driver to take advantage of root-hub IRQs rather than polling during the
time it is suspended.  (Unfortunately the hardware doesn't support
port-change interrupts while the controller is running.)  It also turns
off the driver's private timer while the controller is suspended, as it
isn't needed then.  The combined elimination of polling interrupts and
timer interrupts ought to be enough to allow some systems to save a
noticeable amount of power while they are otherwise idle.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:44 -07:00
Alan Stern 4daaa87c8f [PATCH] USB UHCI: Fix up loose ends
This patch tidies up a few loose ends left by the preceding patches.
It indicates the controller supports remote wakeup whenever the PM
capability is present -- which shouldn't cause any harm if the
assumption turns out to be wrong.  It refuses to suspend the
controller if the root hub is still active, and it refuses to resume
the root hub if the controller is suspended.  It adds checks for a
dead controller in several spots, and it adds memory barriers as
needed to insure that I/O operations are completed before moving on.

Actually I'm not certain the last part is being done correctly.  With
code like this:

	outw(..., ...);
	mb();
	udelay(5);

do we know for certain that the outw() will complete _before_ the
delay begins?  If not, how should this be written?

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:44 -07:00
Alan Stern a8bed8b6be [PATCH] USB UHCI: Add root-hub suspend/resume support
This patch implements (finally!) separate suspend and resume routines
for the root hub and the controller in the UHCI driver.  It also
changes the sequence used to reset the controller during initial
probing, so as to preserve the existing state during a Resume-From-Disk.
(This new sequence is what should be used in the PCI Quirks code for
early USB handoffs, incidentally.)  Lastly it adds a notion of the
controller being "inaccessible" while in a PCI low-power state, when
normal I/O operations shouldn't be allowed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:43 -07:00
Alan Stern c8f4fe4358 [PATCH] USB UHCI: Add root hub states
This patch starts making some serious changes to the UHCI driver.
There's a set of private states for the root hub, and the internal
routines for suspending and resuming work completely differently, with
transitions based on the new states.  Now the driver distinguishes
between a privately auto-stopped state and a publicly suspended state,
and it will properly suspend controllers with broken resume-detect
interrupts instead of resetting them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:43 -07:00
Alan Stern f5946f8220 [PATCH] USB UHCI: Minor improvements
This patch makes a few small improvements in the UHCI driver.  Some
code is moved between different source files and a more useful pointer
is passed to a callback routine.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:43 -07:00
Alan Stern 014e73c99a [PATCH] USB UHCI: subroutine reordering
This patch moves a few subroutines around in the uhci-hcd source file.
Nothing else is changed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:42 -07:00
David Brownell 72ebddb59a [PATCH] USB: turn a user mode driver error into a hard error
This patch turns a user mode driver error into a hard error, and updates
the relevant diagnostic slightly to help troubleshooting.  gphoto was
known to have this problem, hopefully it is now fixed (they have had
plenty of warning...)

This had been left as a soft error to give various user mode drivers a
change to be properly fixed, with the statement that starting in about
2.6.10 it would be changed.  It had been mostly safe as a soft error ...
but that can not be guaranteed.  Now that a year has passed, it's time to
really insist that the user mode drivers finally fix their relevant bugs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:42 -07:00
Olav Kongas 589a0083a3 [PATCH] USB: Fix oops at rmmod after failed probe in isp116x-hcd
This patch fixes an oops triggered at rmmod of isp116x-hcd
after the probe() has failed.

Also, it extends the error message printed, if the driver
cannot detect "Chip's Clock Ready" after a software reset.
As Ian Campbell recently reported, this happens if the
chip's H_WAKEUP pin is not pulled low during software reset.
Several people have already had this issue, hence the update
to the error message.

Also, extend the error message about the failed clock
detection after the software reset.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
2005-06-27 14:43:42 -07:00
Olav Kongas 4808a1c026 [PATCH] USB: Add isp116x-hcd USB host controller driver
This patch provides an "isp116x-hcd" driver for Philips'
ISP1160/ISP1161 USB host controllers.

The driver:
 - is relatively small, meant for use on embedded platforms.
 - runs usbtests 1-14 without problems for days.
 - has been in use by 6-7 different people on ARM and PPC platforms,
   running a range of devices including USB hubs.
 - supports suspend/resume of both the platform device and the root hub;
   supports remote wakeup of the root hub (but NOT the platform device)
   by USB devices.
 - does NOT support ISO transfers (nobody has asked for them).
 - is PIO-only.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:42 -07:00
David Brownell 313980c927 [PATCH] USB: omap_udc updates (mostly cleanups)
Various USB patches, mostly for portability:

  - Fifo mode 1 didn't work previously (oopsed), so now it's fixed and
    (why not) defines even more endpoints for composite devices.

  - OMAP 1710 doesn't have an internal transceiver.

  - Small PM update:  if the USB link is suspended, don't disconnect on
    entry to deep sleep.

  - Be more correct about handling zero length control reads.  OMAP
    seems to mis-handle that protocol peculiarity though; best avoided.

  - Platform device resources (for UDC and OTG controllers) now use
    physical addresses, so /proc/iomem is more consistent.

  - Minor cleanups, notably (by volume) for "sparse" NULL warnings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2005-06-27 14:43:41 -07:00
Alan Stern d794ac7ae3 [PATCH] USB: g_file_storage: export "stall" parameter
This patch changes the g_file_storage driver to make the "stall" module
parameter generally available; currently it is available only if the
testing version of the module has been configured.  It also fixes a typo
in a comment -- thanks, Pat!

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:40 -07:00
Alan Stern 76f4af8efc [PATCH] USB: g_file_storage: Consolidate min()s
This patch simplifies the g_file_storage driver by consolidating a bunch
of min() calculations at a single spot.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:40 -07:00
YOSHIFUJI Hideaki ae0a97bfda [PATCH] NETDEV: fix receiving multicast frames.
Some USB ethernet drivers did not accept multicast frames appropriately.
IPv6 did not work with those drivers without this patch.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-06-27 00:44:08 -04:00
YOSHIFUJI Hideaki e8d997952b [PATCH] NETDEV: Elecom (Laneed) LD-USBL/TX support.
Elecom (Laneed) LD-USBL/TX support.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-06-27 00:44:08 -04:00
Jeff Garzik 5696c1944a Merge /spare/repo/linux-2.6/ 2005-06-26 23:38:58 -04:00
Christoph Lameter 3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Adrian Bunk 4749f32da9 [PATCH] better USB_MON dependencies
This makes the USB_MON less confusing.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 10:04:15 -07:00
Andrew Morton 790a19cd57 [PATCH] pwc-uncompress warning fix
drivers/usb/media/pwc/pwc-uncompress.c: In function `pwc_decompress':
drivers/usb/media/pwc/pwc-uncompress.c:140: warning: unreachable code at beginning of switch statement

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:35 -07:00
Christoph Hellwig 5f45f1a78f [PATCH] remove duplicate get_dentry functions in various places
Various filesystem drivers have grown a get_dentry() function that's a
duplicate of lookup_one_len, except that it doesn't take a maximum length
argument and doesn't check for \0 or / in the passed in filename.

Switch all these places to use lookup_one_len.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:20 -07:00
Stelian Pop 479f6ea85e [PATCH] USB: fix hid core to return proper error code from probe
Drivers need to return -ENODEV when they can't bind to a device.
Anything else stops the "bind a device to a driver" search.

From: Stelian Pop <stelian@popies.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-22 23:01:09 -07:00
Greg Kroah-Hartman 4893e9d1cf [PATCH] USB: fix show_modalias() function due to attribute change
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:27:35 -07:00
Yani Ioannou 060b8845e6 [PATCH] Driver Core: drivers/usb/input/aiptek.c - drivers/zorro/zorro-sysfs.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
Yani Ioannou 10523b3b82 [PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
Alan Stern f409661877 [PATCH] usbcore: Don't call device_release_driver recursively
This patch fixes usb_driver_release_interface() to make it avoid calling
device_release_driver() recursively, i.e., when invoked from within the
disconnect routine for the same device.  The patch applies to your
"driver" tree.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:29 -07:00
Patrick Mochel 273971bade [PATCH] usb: klist_node_attached() fix
The original code looks like this:

        /* if interface was already added, bind now; else let
         * the future device_add() bind it, bypassing probe()
         */
        if (!list_empty (&dev->bus_list))
                device_bind_driver(dev);

IOW, it's checking to see if the device is attached to the bus or not
and binding the driver if it is. It's checking the device's bus list,
which will only appear empty when the device has been initialized, but
not added. It depends way too much on the driver model internals, but it
seems to be the only way to do the weird crap they want to do with
interfaces.

When I converted it to use klists, I accidentally inverted the logic,
which led to bad things happening. This patch returns the check to its
orginal value.

From: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:28 -07:00
gregkh@suse.de ff710710ea [PATCH] USB: fix build warning in usb core as pointed out by Andrew.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:26 -07:00
mochel@digitalimplant.org d4a7537122 [PATCH] Fix up USB to use klist_node_attached() instead of list_empty() on lists that will go away.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:17 -07:00
mochel@digitalimplant.org 6034a080f9 [PATCH] Use driver_for_each_device() instead of manually walking list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:13 -07:00
Mark M. Hoffman 5cebfb759c [PATCH] USB: trivial error path fix
Trivial fix to USB class-creation error path; please apply.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:09 -07:00
gregkh@suse.de 56b2293595 [PATCH] class: convert drivers/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:09 -07:00
gregkh@suse.de 8561b10f6e [PATCH] USB: move the usb hcd code to use the new class code.
This moves a kref into the main hcd structure, which detaches it from
the class device structure.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:07 -07:00
Dmitry Torokhov 8d790d7408 [PATCH] make driver's name be const char *
Driver core:
  change driver's, bus's, class's and platform device's names
  to be const char * so one can use
            const char *drv_name = "asdfg";
  when initializing structures.
  Also kill couple of whitespaces.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:01 -07:00
James Bottomley 3237ee78fc merge by hand (fix up qla_os.c merge error) 2005-06-17 18:42:23 -05:00
Jeff Garzik 68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik 94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik 8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
Oliver Neukum 58125f95c6 [PATCH] fix for kaweth broken by changes in the networking layer
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-16 09:02:59 -07:00
David Brownell c22fa3acbc [PATCH] spin longer for ehci port reset completion
This makes the EHCI driver spin a bit longer before concluding that the
port reset failed.  "Obviously safe."

It allows some devices to enumerate that previously didn't.  We've seen
a bunch of these problem reports recently, this will make some go away.

As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI
controllers seem to take forever to finish port resets and produce
"port N reset error -110" type errors.  Spinning a bit longer helps.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13 08:20:41 -07:00
Alan Cox c0105338eb [PATCH] pwc bug fix
The pwc chainsaw session left some setups not working.  There is a
sanity check on compression buffers that simply isn't right any more as
we never allocate one.

This doesn't address the email and other changes.  I'll do those
tomorrow if I get time, but it is the minimal fix for the code and basic
feature set.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-12 21:05:57 -07:00
Ian Abbott 76854ceac3 [PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc
ftdi_sio: Avoid losing bytes at tty-ldisc.

This patch was originally developed by Daniel Smertnig.  I
(Ian Abbott) made a few changes.  It has been tested by both
Daniel and I, at least for raw, non-canonical receive data
processing.

Here is Daniel's original description of the patch:

===
During a project in which I was using a FTDI 232BM to
transmit data at relative high speeds (625kBit/s), I
noticed a problem where data was lost even if flow
control was enabled: The FTDI-Driver receives 512 Bytes
of data over USB at a time, which consists of 8 64-Byte
packets. Subtracting the 2 bytes of status information
included in each packet this gives 496 "real" data
bytes per read.

This data is passed (indirectly, via the flip buffers)
to the tty line discipline which takes care of
throttling when there the free buffer space reaches
TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver
processes up to 496 bytes at a time, throttling won't
happen in time and the line discipline will discard the
remaining bytes.

To avoid this the patch passes data in 62-byte blocks
to the tty layer and checks the available space in the
ldisc-buffers. If there isn't enough free space,
processing the rest of the data is delayed using a
workqueue.

Note: The original problem should be easily
reproducible with a userspace program which does slow &
small reads.
===

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-09 01:38:15 -07:00
Dmitry Torokhov e5119885f0 Input: wacom - fix formatting in accordance to CodingStyle
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-06 02:28:29 -05:00
Ping Cheng b2f86369e3 Input: Wacom driver update
- add support for Cintiq 21UX
       - fix a Graphire bug
       - merge wacom_intuos3_irq into wacom_intuos_irq

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-06 02:25:50 -05:00
Stephane VOLTZ 5388054697 Input: add driver for Acecad Flair USB tablets
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-06 02:22:37 -05:00
Dmitry Torokhov 3c241f8337 Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-06 02:21:03 -05:00
David Brownell f4d340cf86 [PATCH] USB: resolve Zaurus problem
This "obvious" one-liner is needed to recognize Zaurus SL 6000;
it just checks two GUIDs not just one.

OSDL bugids #4512 and #4545 seem to be duplicates of this report.

From: Gerald Skerbitz <gsker@tcfreenet.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:16:17 -07:00
Craig Shelley 39a66b8d22 [PATCH] USB: CP2101 Add support for flow control
Added support to get/set flow control line levels using TIOCMGET and
TIOCMSET.
Added support for RTSCTS hardware flow control.
cp2101_get_config and cp2101_set_config modified to support long request
strings, required for configuring flow control.

Signed-off-by: Craig Shelley craig@microtron.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:30 -07:00
Phil Dibowitz 1724757e5a [PATCH] USB Storage: Add unusual_devs for Trumpion Voice Recorder
The original entry of this patch was submitted by Filippo Bardelli
<filibard@libero.it>, with cleanups and patch-ification by me.

This corrects the subclass that the device reports.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:30 -07:00
Paulo Marques 77ddecc3c0 [PATCH] USB: make MODALIAS code a bit smaller devices
This patch makes the code to provide modalias in sysfs for usb devices
56 bytes smaller in i386, while making it clear that the first part of
the modalias string is the same no matter what the device class is.

Signed-Off-By: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:29 -07:00
Matthias Urlichs 58cfe9113e [PATCH] USB: add Option Card driver
This patch adds a new driver for "Option" cards.  This is a GSM data card,
controlled by three "serial ports" which are connected via an OHCI adapter,
all located on an oversized PC-Card.  It's sold by several GSM service
providers.

Traditionally, this card has been accessed via the standard serial driver
and appropriate vendor= and product= options.  However, testing has
revealed several problems with this approach, including hung data transfers
and lost data blocks when receiving.

Therefore, I've written a separate driver.

Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:29 -07:00
Greg Kroah-Hartman 4871d3be13 [PATCH] USB: add Vernier devices to HID blacklist
They aren't really HID devices.

Damm microsoft HID driver, that thing has caused more companies to have
to do this kind of hack...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:29 -07:00
Lonnie Mendez dc1d1003e8 [PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist table
This patch adds the DeLorme Earthmate lt-20 productid to the hid
blacklist table.  This patch ensures the lt-20 can be claimed by the
appropriate driver (cypress_m8).

Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid
blacklist table.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:28 -07:00
Ping Cheng 5ce0482e18 [PATCH] USB: add new wacom device to usb hid-core list
- add Intuos3 and Cintiq 21UX

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:28 -07:00
Adrian Bunk d7771a33bf [PATCH] USB: remove drivers/usb/media/pwc/ChangeLog
This patch removes the outdated ChangeLog file for this driver.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:28 -07:00
Dmitry Torokhov 9d54329799 Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-01 02:37:23 -05:00
Greg Kroah-Hartman 06299db3e7 [PATCH] USB: fix usb-serial generic initialization
At module load time, if a generic device is found, the tty information
for the device is not set up properly (as the tty structures aren't initialized
yet.)  This can cause big problems for things like udev.  This patch fixes this.

Thanks to Kay Sievers for the original patch for this problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:59 -07:00
Ian Abbott 47900743a5 [PATCH] USB: ftdi_sio: new PID for ELV UM100
ftdi_sio: Add PID for "ELV USB Module UM100".
PID sent by Armin Laugher.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:59 -07:00
David Brownell c6de2b64eb [PATCH] USB: add sl811_cs support
This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by
wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver.

This CF card is especially useful for PDAs, which currently tend to have
no other solution for USB host capability.

From: Botond Botyanszki <boti@rocketmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:58 -07:00
David Brownell 1e9a47b62f [PATCH] USB: sl811-hcd fixes
Various fixes to the sl811-hcd driver:

  * Fix small glitches that crept in during recent evolution of usbcore's hcd
    glue layer, coupling endpoint state records to usbcore and active urbs.
    (As noted by folk whose boards weren't stuck on 2.6.9 kernels...)

  * Cope with various system-specific issues:
      - Some configurations (e.g. a CF-card uses this chip) have iospace
        addresses for the two registers, rather than memory mapped ones.
      - Some configurations do interesting things with IRQs; maybe the
        line is shared, or it doesn't support level triggering.
      - Not all boards can drive the chip reset line in software.

  * Address a potential race during unlinking.

  * Tweak probe/remove section info to handle the case where this segment
    of a platform bus is hotpluggable (e.g. CF card).  (The basic problem
    is that CONFIG_HOTPLUG is global, which is wrong since not all busses
    can hotplug even on hotplug-friendly systems...)  Also export the
    driver, so that the CF driver can depend on it.

Also removed some annoying end-of-line whitespace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:58 -07:00
Adam Kropelin bef3768d8f Input: HID items of width 32 (bits) or greater are incorrectly extracted
due to a masking bug in hid-core.c:extract(). This patch fixes it
       up by forcing the mask to be 64 bits wide.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:30:08 -05:00
Dmitry Torokhov 65cde54b8b Input: remove user counters from drivers/usb/input since input
core takes care of calling open and close methods only
       when needed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:29:38 -05:00
Dmitry Torokhov 8baf9ed400 Input: mtouchusb was indented with spaces instead of tabs, pass
through Lindent and adjust results.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:29:08 -05:00
Dmitry Torokhov 05f091ab4c Input: whitespace fixes in drivers/usb/input
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:29:01 -05:00
Vojtech Pavlik 71387bd77f Input: Fix a warning in hid-core.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:28:14 -05:00
Vojtech Pavlik 854561b019 Input: Make hid-core issue a SET_IDLE request before GET_REPORT, like
Windows does. This should make life easier for devices that were
       tested with Windows only.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:28:00 -05:00
Hans-Christian Egtvedt 8608471262 Input: Add driver for ITM Touch USB touchscreens.
From: Hans-Christian Egtvedt <hc@mivu.no>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:27:45 -05:00
Dave Jones dcefb396c2 [PATCH] Fix up pwc driver compilation.
The neutering of the pwc driver was incomplete. It still references
some now-dead files..

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 10:36:27 -07:00
Al Viro 3dcefbc9d6 [PATCH] zd1201 fixes
In netdev-2.6 we need to update zd1201.c since we don't have
driver/net/wireless/ieee802_11.h anymore.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
2005-05-27 22:23:04 -04:00
Alan Cox 88c1834633 [PATCH] remove non-cleanroom pwc driver compression
The original pwc author raised some questions about the reverse
engineering of the decompressor algorithms used in the pwc driver.
Having done some detailed investigation it appears those concerns that
clean room policy was not followed are reasonable.  I've also had a
friendly discussion with Philips to ask their view on this.

This removes the problem items of code which reduces the pwc
functionality in the kernel a little but leaves all the framework for
setup that will be needed for decompressors in user space (where they
eventually belong).  This change set is designed to be the minimal risk
change set given that 2.6.12 is hopefully close to hand, with a view to
merging the much updated pwc code in 2.6.13 series kernels.

Someone else can then redo the decompressors properly (clean room) in
user space.

Note that while its easy to say that it should have been caught earlier,
but the violation was really only obvious to someone who had access to
both the proprietary source and the 'GPL' source.
2005-05-27 07:45:21 -07:00
David Woodhouse 0e15850200 [PATCH] Speedtouch resync after lost signal.
There's a bigger Speedtouch update coming your way after 2.6.12 but in
the meantime, let's at least make it automatically resync if the DSL
signal is lost.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-25 10:13:43 -07:00
Greg KH 360b52b089 [PATCH] USB: add modalias sysfs file for usb devices
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-16 21:44:26 -07:00
Lonnie Mendez 25b6f08e3f [PATCH] USB: cypress_m8: add support for the DeLorme Earthmate lt-20
This patch adds support for the DeLorme Earthmate lt-20 to the
cypress_m8 driver.  The device was tested and found to be compatible
with the cypress_m8 driver.  This is a resend with the complete patch
which properly compiles.

Adds support for the DeLorme Earthmate lt-20 to the cypress_m8 driver.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-16 21:44:26 -07:00
David Brownell 4756ae5b52 [PATCH] USB: ehci suspend must stop timer
Force the EHCI watchdog timer off during suspend, in case for some
reason it was still running after the root hub suspended.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-16 21:44:25 -07:00
David Brownell 80615f8153 [PATCH] USB: usbnet driver fixes
Updates to the usbnet driver:

 - Remove a warning when built with Zaurus support but not CDC Ethernet;
   just moves an #ifdef to cover more code

 - Two tweaks to the pseudo-MDLM support:
    * correctly handle _either_ of the two GUIDs
    * ignore a padding bit that doesn't seem necessary

 - Remove ID for one Motorola phone that uses the MDLM stuff.

It also updates the Kconfig helptext to make it clearer that the "Zaurus"
configuration option supports an increasing (sigh) family of nonstandard
peripheral protocols.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-16 21:44:25 -07:00
Lonnie Mendez 3cb4a4f739 [PATCH] USB cypress_m8: update kernel driver with current source
Fixed problem where setting or retreiving the serial config would fail
with EPIPE.  Removed CRTS toggling so the driver behaves more like other
usbserial adapters.  Issued new interval of 1ms instead of the default
bInterval.  As a result, transfer speed has been substantially
increased.  From avg. 850bps to avg. 3300bps.  Also added new module
parameter 'interval' to tweak the interval in case this change causes
problems for someone.  Cleaned up code and formatting issues so source
is more readable.  Replaced the C++ style comments.  Various other code
cleanups.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:52 -07:00
Steven Cole 093cf723b2 [PATCH] USB: Spelling fixes for drivers/usb.
Here are some spelling corrections for drivers/usb.

cancelation -> cancellation
succesful -> successful
cancelation -> cancellation
decriptor -> descriptor
Initalize -> Initialize
wierd -> weird
Protocoll -> Protocol
occured -> occurred
successfull -> successful
Procesing -> Processing
devide -> divide
Isochronuous -> Isochronous
noticable -> noticeable
Basicly -> Basically
transfering -> transferring
intialize -> initialize
Incomming -> Incoming
additionnal -> additional
asume -> assume
Unfortunatly -> Unfortunately
retreive -> retrieve
tranceiver -> transceiver
Compatiblity -> Compatibility
Incorprated -> Incorporated
existance -> existence
Ununsual -> Unusual

Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:52 -07:00
Phil Dibowitz 7b1cbebaa7 [PATCH] USB: unusual_devs entry for Minolta Dimage Z10
This patch adds an unusual_devs entry for the Minolta Dimage Z10.
Originally reported by Vilisas <vilisas@xxx.lt>

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:51 -07:00
Vivian Bregier 8af60be9a7 [PATCH] USB: unusual_devs.h: atmel snd1 storage
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:51 -07:00
Ian Abbott 5e54f91d8d [PATCH] USB: ftdi_sio redundant macro removal
[ftdi_sio] Replaced redundant INTERFACE_A and INTERFACE_B macros with
the equivalent PIT_SIOA and PIT_SIOB macros.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:50 -07:00
Ian Abbott 6f92872cc8 [PATCH] USB: VID/PID updates for ftdi_sio driver
Some VID/PID updates for the ftdi_sio driver:

* The "Gude Analog- und Digitalsysteme GmbH" entries were missing from
  the "combined" table.
* Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from
  4n-galaxy.de.
* Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to
  FTDI_RM_CANVIEW_PID.
* Added VID/PID for serial converter in Mobility Electronics EasiDock
  USB 200 (mentioned by Gregory Schmitt).
* Added PID for Active Robots USB comms board (mentioned by John Koch).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
2005-05-03 23:31:50 -07:00
Andrea Arcangeli b9ab0746a5 [PATCH] USB: new usbnet device id
On Thu, Apr 14, 2005 at 11:06:21PM +0400, Sergey Vlasov wrote:
> http://thread.gmane.org/gmane.linux.usb.devel/32977
>
> (see "[PATCH] N/3 cdc acm errors").
>
> You also need this driver core fix:
>
> http://thread.gmane.org/gmane.linux.usb.devel/33132

I reproduced the same oops while trying to execute at+mode=99, it would
be nice to get these fix merged since I believe it's still needed to
connect the laptop over gprs (something I didn't test yet).

This further patch will allow you to connect via usbnet, Greg could you
apply? Thanks!

Signed-off-by: Andrea Arcangeli <andrea@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:50 -07:00
Greg KH 3b86b2028c [PATCH] USB: add a driver for the AirPrime CDMA Wireless PC card.
Easier than trying to use the generic usb-serial driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:49 -07:00
David Brownell 56c1e26d75 [PATCH] USB: ehci power fixes
Miscellaneous updates for EHCI.

 - Mostly updates the power switching on EHCI controllers.  One routine
   centralizes the "power on/off all ports" logic, and the capability to
   do that is reported more correctly.

 - Courtesy Colin Leroy, a patch to always power up ports after resumes
   which didn't keep a USB device suspended.  The reset-everything logic
   powers down those ports (on some hardware) so something needs to turn
   them back on.

 - Minor tweaks/bugfixes for the debug port support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:49 -07:00
Matthew Dharm e2e66446e0 [PATCH] USB Storage: fix compile error
This patch fixes a compiler error caused by a missing prototype.  It should
apply directly to Greg KH's usb-2.6.git tree.

Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:31:49 -07:00
Al Viro 5330e9273e [PATCH] size_t portability fixes - drivers/usb
size_t is zu, ssize_t is zd...

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-26 11:26:53 -07:00
Al Viro 9727d04aa6 [PATCH] pegasus NULL noise removal
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-26 07:43:41 -07:00
Patrick Boettcher 9719b0c298 [PATCH] USB: Fix for ati_remote
when stealing code from ati_remote for a GPL-driver of my usbradio (because of
its neat usb int transfers) I found out, that the inbuf is freed twice.

I don't have the ati-remote, so I don't know it is a problem at all, but it
looks strange to me anyway. Also I don't know if it has been fixed already in
newer kernel versions.


From: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-23 13:16:15 -07:00
David Brownell f3fae6ed6a [PATCH] USB: better usbnet zaurus/mdlm/... fix
This is a somewhat more comprehensive fix for the problem of devices
like the newer Zaurii ... or in this case some Motorola cell phones.

To recap, the problem's root cause is that these devices aren't using
standard USB class specifications for their network links, and so far
we've had to add lots of device-specific driver entries.  The vendor
fix abuses the CDC MDLM descriptors (they _could_ have conformed to
the spec, but didn't) and defines a "Belcarra firmware" pseudo-class.

This patch recognizes that pseudo-class by the GUIDs in those descriptors,
and handles the devices that just use the Zaurus framing.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:02 -07:00
David Hollis 7ea13c9c0e [PATCH] usbnet: Convert ASIX code to use new status infrastructure
Modify the ASIX USB Ethernet code to make use of the new status
infrastructure in usbnet.

Additionally, add a link_reset() handler to the struct usbnet
structure to provide a generic means for a driver to perform link
reset tasks such as a determining link speed and setting
device flags accordingly.


Signed-off-by: David Hollis <dhollis@davehollis.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:02 -07:00
Roman Kagan fb3b4ebc0b [PATCH] USB: MODALIAS change for bcdDevice
The patch below adjusts the MODALIAS generated by the usb hotplug
function to match the proposed change to scripts/mod/file2alias.c.

Signed-off-by: Roman Kagan <rkagan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:01 -07:00
Adrian Bunk 2e0a6b8cd2 [PATCH] USB: drivers/usb/net/zd1201.c: make some code static
This patch makes some needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:01 -07:00
Adrian Bunk 2c47e7f378 [PATCH] USB: drivers/usb/media/pwc/: make code static
This patch makes needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:00 -07:00
Adrian Bunk 7107627b04 [PATCH] USB: drivers/usb/media/sn9c102_core.c: make 2 functions static
This patch makes two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:00 -07:00
Adrian Bunk be5e3383a9 [PATCH] USB: drivers/usb/input/usbkbd.c: make a function static
This patch makes a needlessly global function static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:07:00 -07:00
Thomas Winischhofer cef11127ea [PATCH] USB: new SiS device id
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:06:59 -07:00
Greg KH 35ecc486a3 [PATCH] USB: fix up the HP49G+ Calculator USB Serial driver
Fix compiler warnings, and remove unneeded #includes

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:06:59 -07:00
Arthur Huillet 36045fb77c [PATCH] USB: add HP49G+ Calculator USB Serial support
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:06:59 -07:00
Sven Anderson 35f4a0c441 [PATCH] USB: clean up all iPod models in unusual_devs.h
Phil Dibowitz wrote:
> 1. You're adding product IDs 1202, 1203, 1204, and 1205. 1203 was
> already there, but you remove it, OK, but 1205 is already there, so
> you'll need to fix that.

I was not removing 1203, it's just the extension of the bcd range. You are 
right about 1205, as I wrote, it was a patch against 2.6.11.7. Attached is 
a patch against 2.6.12-rc2.

> 2. I'm OK with the full bcd range if Apple is changing it on firmware
> revs... fine, but it's bcd, not hex... 0x9999 =)

I just copied from other entries. There're a lot 0xffffs in unusual_dev.h, 
so I assumed it is correct. I changed it to 0x9999.

> 3. It's rather obnoxious to take the original submitter's credit away.

I didn't remove it, I changed it to "based on...". Because I changed 
something (the range) in his entry, I thought it is the best to take the 
responsibility but keep the origin. Anyway, in the new patch I did it in a 
different way.

> 4. Your /proc/bus/usb/devices shows 1204, but I see no evidence 1202 is
> really an iPod.

I don't have an old iPod mini, but you find a lot of evidence here:

http://www.google.com/search?q=0x1202+ipod

Especially this one:

http://www.qbik.ch/usb/devices/showdescr.php?id=2737

> It also looks like 1205's entry is getting mangled, but I haven't
> attempted to apply the patch, so I'm not sure.

No, the patch was ok, but I agree it looks strange. It's not very 
readable, because I cannot tell diff to work blockwise instead of 
linewise. Because of the similarity of the entries, diff splits and merges 
them. Anyway, the new patch "looks" better. ;-)

Signed-off-by: Sven Anderson <sven-linux@anderson.de>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:06:58 -07:00
Hideaki YOSHIFUJI 275cfdf412 [PATCH] USB: compilation failure on usb/image/microtek.c
maybe typo?

Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:06:58 -07:00
Linus Torvalds 9f6c6fc505 Merge with kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/
for 13 driver core, sysfs, and debugfs fixes.
2005-04-19 13:14:28 -07:00
kay.sievers@vrfy.org 089d42b013 [PATCH] kobject/hotplug split - usb cris
kobject_add() and kobject_del() don't emit hotplug events anymore.
We need to do it ourselves now.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 21:57:37 -07:00
Viktor A. Danilov e838a0d4d5 [PATCH] USB: fix AIPTEK input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
REASON: `dev` - field not filled...
SOLUTION: in linux/drivers/usb/input/aiptek.c write
	aiptek->inputdev.dev = &intf->dev;
before calling
	input_register_device(&aiptek->inputdev);

From: "Viktor A. Danilov" <__die@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/input/aiptek.c
===================================================================
2005-04-18 17:39:35 -07:00
David Brownell 6cdee106e7 [PATCH] usb gadget: ethernet/rndis updates
Updates to the Ethernet/RNDIS gadget driver (mostly for RNDIS):

  - Fix brown-paper bag goof with RNDIS packet TX ... the wrong length
    field got set, so Windows would ignore data packets it received.

  - More consistent handling of CDC output filters (but not yet hooking
    things up so RNDIS uses the mechanism).

  - Zerocopy RX for RNDIS packets too (saving CPU cycles).

  - Use the pre-allocated interrupt/status request and buffer, rather
    than allocating and freeing one of each every few seconds (which
    could fail).

  - Some more "sparse" tweaks, making both dual-speed and single-speed
    configurations happier.

  - RNDIS speeds are reported in units of 100bps, not bps.

Plus two minor cleanups (whitespace, messaging).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:34 -07:00
Jesper Juhl 1bc3c9e1e4 [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL
Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*,
there's no need to check a pointer for NULL before calling kfree() on it.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/class/audio.c
===================================================================
2005-04-18 17:39:34 -07:00
Jesper Juhl 6fd19f4b55 [PATCH] usb: kfree() cleanups in drivers/usb/core/devio.c
Checking for NULL before calling kfree() is redundant. This patch removes
these redundant checks and also makes a few tiny whitespace changes.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:33 -07:00
Peter Favrholdt acbb36f116 [PATCH] USB: pl2303 new vendor/model ids
Please accept the attached patch which adds the vendorid 0x0745 and
modelid 0x0001 (ID 0745:0001) "Syntech Information Co., Ltd."

The device is an USB IR cradle for a barcode scanner (CPT-8001C) from
Cipherlab.


From: Peter Favrholdt <pfavr@mip.sdu.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -u kernel-source-2.6.11/drivers/usb/serial/pl2303.c ../kernel-source-2.6.11/drivers/usb/serial/pl2303.c
2005-04-18 17:39:32 -07:00
Flavio Leitner 97bb13ec5b [PATCH] pl2303 - status line
I'm attaching a patch to fix status when using Siemens X65
mobile. This mobile use first byte instead of normal UART_STATE
byte.


From: Flavio Leitner <fbl@conectiva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/serial/pl2303.c
===================================================================
2005-04-18 17:39:31 -07:00
Flavio Leitner 6fdd8e8e33 [PATCH] pl2303 - unplug device.
It's possible to unplug usb device and do tiocmset() and tiocmget() without
valid interface in pl2303 module.

The patch below check this and return -ENODEV if interface was removed.

From: Flavio Leitner <fbl@conectiva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -purN linux-05-04-11/drivers/usb/serial/pl2303.c linux-05-04-11.usb/drivers/usb/serial/pl2303.c
2005-04-18 17:39:31 -07:00
Alan Stern 8835f66573 [PATCH] USB: USB API documentation modification
In response to complaints about excessive latency in the uhci-hcd driver
I'm planning to convert it to a top-half/bottom-half design.  It turns out
that to do this, the USB API has to be modified slightly since the driver
will not be able to meet one of the guarantees in the current API.  This
patch changes some kerneldoc, specifying the weaker guarantee.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:30 -07:00
David Brownell 0e4987639a [PATCH] USB: OHCI on Compaq Aramada 7400
This adds a quirk to the OHCI driver that lets it work with an old
Compaq implementation.  It also removes some needless strings from
the non-debug version of the driver.

Signed-off-by: Chris Clayton <chris_clayton@f1internet.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:30 -07:00
David Brownell a2fe20129e [PATCH] USB: usbnet and zaurus zl-5600
Hmm, another case of a Zaurus ROM not telling the expected conformance lie;
this patch handles the lies told by the SL5600.

From: bender647@gmail.com
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:29 -07:00
Thomas Winischhofer 7ab7c34c90 [PATCH] USB: new SIS device id
the attached patch adds another USB device ID to the list. Seems the
device is known under multiple IDs.

Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:28 -07:00
felix@derklecks.de d6427cf7ea [PATCH] USB Storage unusual_dev.h 07c4:a10b Datafab Systems, Inc.
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/storage/unusual_devs.h
===================================================================
2005-04-18 17:39:28 -07:00
Phil Dibowitz e4334fa4c5 [PATCH] Fix GO_SLOW delay
This patch changes the delay for the US_FL_GO_SLOW patch from 110us to 125.
Some delays need this extra delay includign Jan De Luyck's drive which spawned
the original increase from 110 to 110us. 125 is a microframe, so this delay
seems to make sense more than just be a random delay (thanks to David Brownell
for pointing that out after my original patch).

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/storage/transport.c
===================================================================
2005-04-18 17:39:27 -07:00
akpm@osdl.org 403a98176a [PATCH] USB: usbnet printk warning fix
On ppc64:

drivers/usb/net/usbnet.c: In function `skb_return':
drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3)
drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/usb/net/usbnet.c~usbnet-printk-warning-fix drivers/usb/net/usbnet.c
2005-04-18 17:39:27 -07:00
Christopher Li 668a9541a5 [PATCH] USB: bug fix in usbdevfs
I am sorry that the last patch about 32 bit compat ioctl on
64 bit kernel actually breaks the usbdevfs. That is on the current
BK tree. I am retarded. 

Here is the patch to fix it. Tested with USB hard disk and webcam
in both 32bit compatible mode and native 64bit mode.

Again, sorry about that.


From: Christopher Li <chrisl@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:26 -07:00
David Brownell a81e7ecca3 [PATCH] USB: revert "fix" to usb_set_interface()
This reverts a recent change to usb_set_interface().  The change worked
around a quirk in certain devices, but doing this in usbcore creates
needless regressions for other devices.  More appropriate fixes won't
put such handling in usbcore.

Basically it's tricky to do a full software reset of USB device state, since
the devices don't all act the same.  This adds a note to the kerneldoc for
the usb_reset_configuration() call to highlight the quirk this was working
around:  endpoint data toggles not being reset.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:25 -07:00
Nishanth Aravamudan 45f23f189c [PATCH] USB: usb/digi_acceleport: correct wait-queue state
First patch incorrectly changed state of the wait-queue usage to
TASK_UNINTERRUPTIBLE. Reverted to TASK_INTERRUPTIBLE.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:25 -07:00
Greg KH 6d5e8254bf [PATCH] USB: fix up some sparse warnings about static functions that aren't static.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/core/usb.h
===================================================================
2005-04-18 17:39:24 -07:00
Pavel Machek ba9d35fb01 [PATCH] USB: fix up remaining pm_message_t usages
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:24 -07:00
David Brownell 9a5d3e98dd [PATCH] USB: hcd suspend uses pm_message_t
This patch includes minor "sparse -Wbitwise" updates for the PCI based
HCDs.  Almost all of them involve just changing the second parameter of the
suspend() method to a pm_message_t ...  the others relate to how the EHCI
code walks in-memory data structures.  (There's a minor bug fixed there too
...  affecting the big-endian sysfs async schedule dump.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/core/hcd.h
===================================================================
2005-04-18 17:39:23 -07:00
David Brownell 27d72e8572 [PATCH] usb suspend updates (interface suspend)
This is the first of a few installments of PM API updates to match the
recent switch to "pm_message_t".  This installment primarily affects
USB device drivers (for USB interfaces), and it changes the handful of
drivers which currently implement suspend methods:

    - <linux/usb.h> and usbcore, signature change

    - Some drivers only changed the signature, net effect this just
      shuts up "sparse -Wbitwise":
	* hid-core
	* stir4200

    - Two network drivers did that, and also grew slightly more
      featureful suspend code ... they now properly shut down
      their activities.  (As should stir4200...)
	* pegasus
	* usbnet

Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks
to me like it's missing a request to turn it on, vs just configuring it.
The ASIX code in usbnet also has WOL hooks that are ready to use; untested.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/net/irda/stir4200.c
===================================================================
2005-04-18 17:39:22 -07:00
David Brownell c6053ecffb [PATCH] usb resume fixes
This has a variety of updates to the shared suspend/resume code for
PCI based USB host controllers.

    - Cope with pm_message_t replacing the target system state.
      This is actually a loss of functionality; PCI D1 and D2
      states will no longer be used, and it's no longer knowable
      that D3cold is on the way so power will be lost.

    - Most importantly, some of the resume paths are reworked and
      cleaned up.  They're now an exact mirror of suspend paths,
      and more care is taken to ensure the hardware is reactivated
      before the hardware re-enables interrupts.

Plus comment and diagnostic cleanups; there are some nasty cases here 
especially combined with swsusp, now they're somewhat commented.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/usb/core/hcd-pci.c~usb-resume-fixes drivers/usb/core/hcd-pci.c
2005-04-18 17:39:22 -07:00
Larry Battraw 115c1ce524 [PATCH] USB: visor Tapwave Zodiac support patch
Here's a tiny patch to add support for the Tapwave Zodiac (for
2.6.11.6).  I've been meaning to send it in for a while but kept
upgrading my kernel and losing the changes :-)  I own the device and it
works fine with the latest pilot-link beta.

From: Larry Battraw <lbattraw@insightbb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:20 -07:00
gregkh@suse.de ac21e9ff08 [PATCH] USB: add new visor id for Treo 650
Thanks to Jamieson Becker <jamie@jamiebecker.com> for the info

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -Naur -X dontdiff-osdl tmp/linux-2.6.12-rc2/drivers/usb/serial/visor.h linux-2.6/drivers/usb/serial/visor.h
2005-04-18 17:39:20 -07:00
2bc474c364 [PATCH] kill old EH constants
Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:33:41 -05:00
0db7157ca4 [PATCH] kill old EH constants
Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16 20:14:52 -05:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00