Commit Graph

985 Commits

Author SHA1 Message Date
Alan Stern a6ff6e7a9d usb-storage: alauda: Fix uninit-value in alauda_check_media()
Syzbot got KMSAN to complain about access to an uninitialized value in
the alauda subdriver of usb-storage:

BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0
drivers/usb/storage/alauda.c:1137
CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x191/0x1f0 lib/dump_stack.c:113
  kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108
  __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250
  alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460

The problem is that alauda_check_media() doesn't verify that its USB
transfer succeeded before trying to use the received data.  What
should happen if the transfer fails isn't entirely clear, but a
reasonably conservative approach is to pretend that no media is
present.

A similar problem exists in a usb_stor_dbg() call in
alauda_get_media_status().  In this case, when an error occurs the
call is redundant, because usb_stor_ctrl_transfer() already will print
a debugging message.

Finally, unrelated to the uninitialized memory access, is the fact
that alauda_check_media() performs DMA to a buffer on the stack.
Fortunately usb-storage provides a general purpose DMA-able buffer for
uses like this.  We'll use it instead.

Reported-and-tested-by: syzbot+e7d46eb426883fb97efd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000007d25ff059457342d@google.com/T/
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: e80b0fade0 ("[PATCH] USB Storage: add alauda support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/693d5d5e-f09b-42d0-8ed9-1f96cd30bcce@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:57:16 +02:00
Maxime Bizon a398d5eac6 usb-storage: fix deadlock when a scsi command timeouts more than once
With faulty usb-storage devices, read/write can timeout, in that case
the SCSI layer will abort and re-issue the command. USB storage has no
internal timeout, it relies on SCSI layer aborting commands via
.eh_abort_handler() for non those responsive devices.

After two consecutive timeouts of the same command, SCSI layer calls
.eh_device_reset_handler(), without calling .eh_abort_handler() first.

With usb-storage, this causes a deadlock:

  -> .eh_device_reset_handler
    -> device_reset
      -> mutex_lock(&(us->dev_mutex));

mutex already by usb_stor_control_thread(), which is waiting for
command completion:

  -> usb_stor_control_thread (mutex taken here)
    -> usb_stor_invoke_transport
      -> usb_stor_Bulk_transport
        -> usb_stor_bulk_srb
	  -> usb_stor_bulk_transfer_sglist
	    -> usb_sg_wait

Make sure we cancel any pending command in .eh_device_reset_handler()
to avoid this.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13 18:53:03 +09:00
Linus Torvalds b68ee1c613 SCSI misc on 20230426
Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
 mpi3mr, hisi_sas, arcmsr).  The major core change is the
 constification of the host templates (which touches everything) along
 with other minor fixups and clean ups.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZEmJACYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU4FAP0WYhFC
 rkbY203/+ErUuwvOKum0VwJKUowCaUD0MBwScAD+Ok/NWobmjdXUBbPUbvVkr+hE
 8B/xs9hodX+1fVJcVG0=
 =fS/j
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
  mpi3mr, hisi_sas, arcmsr).

  The major core change is the constification of the host templates
  (which touches everything) along with other minor fixups and clean
  ups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
  scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()
  scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately
  scsi: cxlflash: s/semahpore/semaphore/
  scsi: lpfc: Silence an incorrect device output
  scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation
  scsi: scsi_debug: Fix missing error code in scsi_debug_init()
  scsi: hisi_sas: Work around build failure in suspend function
  scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
  scsi: mpt3sas: Fix an issue when driver is being removed
  scsi: mpt3sas: Remove HBA BIOS version in the kernel log
  scsi: target: core: Fix invalid memory access
  scsi: scsi_debug: Drop sdebug_queue
  scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts
  scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store()
  scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued()
  scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll()
  scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd
  scsi: scsi_debug: Use scsi_block_requests() to block queues
  scsi: scsi_debug: Protect block_unblock_all_queues() with mutex
  scsi: scsi_debug: Change shost list lock to a mutex
  ...
2023-04-26 15:39:25 -07:00
Bart Van Assche 04d1fa4346 scsi: usb: uas: Declare two host templates and host template pointers const
Improve source code documentation by constifying host templates that are
not modified.

Acked-by: Alan Stern <stern@rowland.harvard.edu> (for usb-storage)
Acked-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-81-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-24 19:20:00 -04:00
Yaroslav Furman a37eb61b6e uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
Just like other JMicron JMS5xx enclosures, it chokes on report-opcodes,
let's avoid them.

Signed-off-by: Yaroslav Furman <yaro330@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230312090745.47962-1-yaro330@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16 12:44:17 +01:00
Kees Cook ce33e64c17 USB: ene_usb6250: Allocate enough memory for full object
The allocation of PageBuffer is 512 bytes in size, but the dereferencing
of struct ms_bootblock_idi (also size 512) happens at a calculated offset
within the allocation, which means the object could potentially extend
beyond the end of the allocation. Avoid this case by just allocating
enough space to catch any accesses beyond the end. Seen with GCC 13:

../drivers/usb/storage/ene_ub6250.c: In function 'ms_lib_process_bootblock':
../drivers/usb/storage/ene_ub6250.c:1050:44: warning: array subscript 'struct ms_bootblock_idi[0]' is partly outside array bounds of 'unsigned char[512]' [-Warray-bounds=]
 1050 |                         if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF)
      |                                            ^~
../include/uapi/linux/byteorder/little_endian.h:37:51: note: in definition of macro '__le16_to_cpu'
   37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
      |                                                   ^
../drivers/usb/storage/ene_ub6250.c:1050:29: note: in expansion of macro 'le16_to_cpu'
 1050 |                         if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF)
      |                             ^~~~~~~~~~~
In file included from ../drivers/usb/storage/ene_ub6250.c:5:
In function 'kmalloc',
    inlined from 'ms_lib_process_bootblock' at ../drivers/usb/storage/ene_ub6250.c:942:15:
../include/linux/slab.h:580:24: note: at offset [256, 512] into object of size 512 allocated by 'kmalloc_trace'
  580 |                 return kmalloc_trace(
      |                        ^~~~~~~~~~~~~~
  581 |                                 kmalloc_caches[kmalloc_type(flags)][index],
      |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  582 |                                 flags, size);
      |                                 ~~~~~~~~~~~~

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230204183546.never.849-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06 13:46:42 +01:00
Juhyung Park dbd24ec17b usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210
The commit e00b488e81 ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS")
blacklists UAS for all of RTL9210 enclosures.

The RTL9210 controller was advertised with UAS since its release back in
2019 and was shipped with a lot of enclosure products with different
firmware combinations.

Blacklist UAS only for HIKSEMI MD202.

This should hopefully be replaced with more robust method than just
comparing strings.  But with limited information [1] provided thus far
(dmesg when the device is plugged in, which includes manufacturer and
product, but no lsusb -v to compare against), this is the best we can do
for now.

[1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com

Fixes: e00b488e81 ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS")
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hongling Zeng <zenghongling@kylinos.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17 16:37:04 +01:00
Jiasheng Jiang c35ca10f53 usb: storage: Add check for kcalloc
As kcalloc may return NULL pointer, the return value should
be checked and return error if fails as same as the ones in
alauda_read_map.

Fixes: e80b0fade0 ("[PATCH] USB Storage: add alauda support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08 16:43:12 +01:00
Linus Torvalds d3dcbe24a0 USB/Thunderbolt changes for 6.1-rc1
Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
 
 Nothing major in here, lots of little things with new devices supported
 and updates for a few drivers.  Highlights include:
 	- thunderbolt/USB4 devices supported a bit better than before,
 	  and some new ids to enable new hardware devices
 	- USB gadget uvc updates for newer video formats and better v4l
 	  integration (the v4l portions were acked by those maintainers)
 	- typec updates for tiny issues and more typec drivers for new
 	  chips.
 	- xhci tiny updates for minor issues
 	- big usb-serial ftdi_sio driver update to handle new devices
 	  better
 	- lots of tiny dwc3 fixes and updates for the IP block that is
 	  showing up everywhere these days
 	- dts updates for new devices being supported
 	- other tiny janitorial and cleanups fixes for lots of different
 	  USB drivers.  Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BN9g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yljdgCdH4Fev4Nvf2Nokfv0q0krcRB3YpUAn1aZfpb/
 EbgxsxhPnTJg+mmXyLms
 =IxUy
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.

  Nothing major in here, lots of little things with new devices
  supported and updates for a few drivers. Highlights include:

   - thunderbolt/USB4 devices supported a bit better than before, and
     some new ids to enable new hardware devices

   - USB gadget uvc updates for newer video formats and better v4l
     integration (the v4l portions were acked by those maintainers)

   - typec updates for tiny issues and more typec drivers for new chips.

   - xhci tiny updates for minor issues

   - big usb-serial ftdi_sio driver update to handle new devices better

   - lots of tiny dwc3 fixes and updates for the IP block that is
     showing up everywhere these days

   - dts updates for new devices being supported

   - other tiny janitorial and cleanups fixes for lots of different USB
     drivers. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: gadget: uvc: don't put item still in use
  usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
  usb: host: ehci-exynos: switch to using gpiod API
  Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
  dt-bindings: usb: Convert FOTG210 to dt schema
  usb: mtu3: fix failed runtime suspend in host only mode
  USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
  usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
  usb: typec: Replace custom implementation of device_match_fwnode()
  usb: typec: ucsi: Don't warn on probe deferral
  usb: add quirks for Lenovo OneLink+ Dock
  MAINTAINERS: switch dwc3 to Thinh
  usb: idmouse: fix an uninit-value in idmouse_open
  USB: PHY: JZ4770: Switch to use dev_err_probe() helper
  usb: phy: generic: Switch to use dev_err_probe() helper
  usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
  usb: cdns3: remove dead code
  usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
  usb: musb: sunxi: Switch to use dev_err_probe() helper
  ...
2022-10-07 16:48:26 -07:00
Linus Torvalds 62e6e5940c SCSI misc on 20221007
Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
 mpt3sas, target); the biggest change (from my biased viewpoint) being
 that the mpi3mr now attached to the SAS transport class, making it the
 first fusion type device to do so.  Beyond the usual bug fixing and
 security class reworks, there aren't a huge number of core changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY0B74yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishW2NAP9CPp2R
 7NRmSyxcyVYvtCNUW3WxXh65Gn+KgArmg8XucgEAhUBX1fSjOzpERWEU+UaXitbE
 Rb+FbjxSc5YxR+nJ/Qc=
 =0Wlp
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
  mpt3sas, target). The biggest change (from my biased viewpoint) being
  that the mpi3mr now attached to the SAS transport class, making it the
  first fusion type device to do so.

  Beyond the usual bug fixing and security class reworks, there aren't a
  huge number of core changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
  scsi: mpi3mr: Remove unnecessary cast
  scsi: stex: Properly zero out the passthrough command structure
  scsi: mpi3mr: Update driver version to 8.2.0.3.0
  scsi: mpi3mr: Fix scheduling while atomic type bug
  scsi: mpi3mr: Scan the devices during resume time
  scsi: mpi3mr: Free enclosure objects during driver unload
  scsi: mpi3mr: Handle 0xF003 Fault Code
  scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
  scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
  scsi: mpi3mr: Support new power management framework
  scsi: mpi3mr: Update mpi3 header files
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
  scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
  scsi: core: Add I/O timeout count for SCSI device
  scsi: qedf: Populate sysfs attributes for vport
  scsi: pm8001: Replace one-element array with flexible-array member
  scsi: 3w-xxxx: Replace one-element array with flexible-array member
  scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
  ...
2022-10-07 12:33:18 -07:00
Hongling Zeng 0fb9703a3e uas: ignore UAS for Thinkplus chips
The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence
performance and trigger kernel panic on several platforms with the
following error message:

[   39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled
               endpoint or incorrect stream ring
[   39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000
               1b000000 05038000

[  720.545894][13] Workqueue: usb_hub_wq hub_event
[  720.550971][13]  ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880
                    26cb80000
[  720.559673][13]  ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880
                    26cb80000
[  720.568374][13]  ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880
                    26ca880f8
[  720.577076][13] Call Trace:
[  720.580201][13]  [<ffffffff8186ae25>] schedule+0x35/0x80
[  720.586137][13]  [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10
[  720.593623][13]  [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0
[  720.601012][13]  [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40
[  720.607141][13]  [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290

Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27 10:50:29 +02:00
Hongling Zeng e00b488e81 usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
The UAS mode of Hiksemi USB_HDD is reported to fail to work on several
platforms with the following error message, then after re-connecting the
device will be offlined and not working at all.

[  592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
                   inflight: CMD
[  592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
                   04 00 00
[  592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
                   inflight: CMD
[  592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
                   00 08 00

These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27 10:50:27 +02:00
Hongling Zeng a625a4b880 uas: add no-uas quirk for Hiksemi usb_disk
The UAS mode of Hiksemi is reported to fail to work on several platforms
with the following error message, then after re-connecting the device will
be offlined and not working at all.

[  592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
                   inflight: CMD
[  592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
                   04 00 00
[  592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
                   inflight: CMD
[  592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
                   00 08 00

These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27 10:50:24 +02:00
sunghwan jung ad5dbfc123 Revert "usb: storage: Add quirk for Samsung Fit flash"
This reverts commit 86d92f5465,
which fix the timeout issue for "Samsung Fit Flash".

But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.

 # hdparm -t /dev/sda (without the quirk)
 Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec

 # hdparm -t /dev/sda (with the quirk)
 Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec

The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.

We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.

Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22 15:52:31 +02:00
Mike Christie f1d0d5c9fe scsi: uas: Drop DID_TARGET_FAILURE use
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it results
    in entering SCSI error handling.

It looks like the driver wanted a hard failure so this swaps it with
DID_BAD_TARGET which gives us that behavior. The error looks like it's for
a case where the target did not support a TMF we wanted to use (maybe not a
bad target but disappointing so close enough).

Link: https://lore.kernel.org/r/20220812010027.8251-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-06 22:05:58 -04:00
Greg Kroah-Hartman a956f91247 Merge 6.0-rc4 into usb-next
We need the USB fixes in here and this resolves the merge issue in:
	drivers/usb/dwc3/gadget.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05 08:03:23 +02:00
Hu Xiaoying c61feaee68 usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
USB external storage device(0x0b05:1932), use gnome-disk-utility tools
to test usb write  < 30MB/s.
if does not to load module of uas for this device, can increase the
write speed from 20MB/s to >40MB/s.

Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn>
Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 16:06:52 +02:00
Wolfram Sang b7db5733a5 usb: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210116.7517-1-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19 11:08:54 +02:00
Witold Lipieta 2aa48857ad usb-storage: Add ignore-residue quirk for NXP PN7462AU
This is USB mass storage primary boot loader for code download on
NXP PN7462AU.

Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com>
Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18 17:18:05 +02:00
Xiang wangx 274a12ea40 USB: storage: Fix typo in comment
Delete the redundant word 'the'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220620104243.4979-1-wangxiang@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21 16:39:42 +02:00
Vincent Mailhol dcd2e49b55 usb: remove third argument of usb_maxpacket()
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).

N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.

CC: Duncan Sands <duncan.sands@free.fr>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Olav Kongas <ok@artecdesign.ee>
CC: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23 10:33:53 +02:00
Lin Ma b92ffb1edd USB: storage: karma: fix rio_karma_init return
The function rio_karam_init() should return -ENOMEM instead of
value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails.

Similarly, it should return -EIO when rio_karma_send_command() fails.

Fixes: dfe0d3ba20 ("USB Storage: add rio karma eject support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21 19:03:26 +02:00
Lin Ma ba6df3ea68 usb-storage: isd200: fix initFunction error return
The initFunction is called when probing a new device, its call relation
is like:

USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> isd200_init_info()

That is, the error return of the initFunction should tell USB core what
happened instead of using custom error code like ISD200_ERROR.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022110.3757-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21 19:02:42 +02:00
Lin Ma 1abf67983a usb-storage: shuttle_usbat: fix initFunction error return
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_usbat_cd() or init_usbat_flash() -> init_usbat()

That is, the error return of the initFunction should tell USB core what
happened instead of using constant or error code like
USB_STOR_TRANSPORT_FAILED.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022115.3773-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21 19:02:40 +02:00
Lin Ma 17b2fb9c23 usb-storage: alauda: fix initFunction error return
The initFunction is called when probing a new device, its call relation
is like:

USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_alauda()

That is, the error return of the initFunction should tell USB core what
happened instead of using error code like USB_STOR_TRANSPORT_ERROR.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022058.3741-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21 19:02:37 +02:00
Linus Torvalds 710f5d627a USB/Thunderbolt patches for 5.18-rc1
Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
 
 Nothing major in here, just lots of little improvements and cleanups and
 new device support.  Highlights are:
 	- list iterator fixups for when we walk past the end of the list
 	  (a common problem that was cut/pasted in almost all USB gadget
 	  drivers)
 	- xen USB driver "hardening" for malicious hosts
 	- xhci driver updates and fixes for more hardware types
 	- xhci debug cable fixes to make it actually work again
 	- usb gadget audio driver improvements
 	- usb gadget storage fixes to work with OS-X
 	- lots of other small usb gadget fixes and updates
 	- USB DWC3 driver improvements for more hardware types
 	- Lots of other small USB driver improvements
 	- DTS updates for some USB platforms
 
 Note, the DTS updates will have a merge conflict in your tree.  The
 fixup should be simple, but if not, I can provide a merged tree if
 needed.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYj7qpQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylRsQCcCryYifAvE2gHaNfI4B01JRWk7gQAoLNiUgvl
 l+srEAXgIVueDhmDxy5P
 =/Ppv
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 5.18-rc1.

  Nothing major in here, just lots of little improvements and cleanups
  and new device support. Highlights are:

   - list iterator fixups for when we walk past the end of the list (a
     common problem that was cut/pasted in almost all USB gadget
     drivers)

   - xen USB driver "hardening" for malicious hosts

   - xhci driver updates and fixes for more hardware types

   - xhci debug cable fixes to make it actually work again

   - usb gadget audio driver improvements

   - usb gadget storage fixes to work with OS-X

   - lots of other small usb gadget fixes and updates

   - USB DWC3 driver improvements for more hardware types

   - Lots of other small USB driver improvements

   - DTS updates for some USB platforms

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
  dt-bindings: usb: mtk-xhci: add compatible for mt8186
  usb: dwc3: Issue core soft reset before enabling run/stop
  usb: gadget: Makefile: remove ccflags-y
  USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
  usb: gadget: eliminate anonymous module_init & module_exit
  usb: usbip: eliminate anonymous module_init & module_exit
  xen/usb: harden xen_hcd against malicious backends
  usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  usb: dwc3: gadget: move cmd_endtransfer to extra function
  usb: dwc3: gadget: ep_queue simplify isoc start condition
  xen/usb: don't use arbitrary_virt_to_machine()
  usb: isp1760: remove redundant max_packet() macro
  usb: oxu210hp-hcd: remove redundant call to max_packet() macro
  usb: common: usb-conn-gpio: Make VBUS supply completely optional
  USB: storage: ums-realtek: fix error code in rts51x_read_mem()
  usb: early: xhci-dbc: Fix xdbc number parsing
  usb: early: xhci-dbc: Remove duplicate keep parsing
  x86/tsc: Be consistent about use_tsc_delay()
  usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
  ...
2022-03-26 13:08:25 -07:00
Linus Torvalds 6f2689a766 SCSI misc on 20220324
This series consists of the usual driver updates (qla2xxx, pm8001,
 libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
 and bug fixes.  The high blast radius core update is the removal of
 write same, which affects block and several non-SCSI devices.  The
 other big change, which is more local, is the removal of the SCSI
 pointer.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
 6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
 Ec1HDuUCE18H1H2QAh0=
 =/Ty9
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...
2022-03-24 19:37:53 -07:00
Alan Stern 1892bf9067 USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent
hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes.  This
is not safe; it presumes a particular bit ordering and it assumes the
compiler will not insert padding, neither of which is guaranteed.

This patch fixes the problem by changing the structures to simple u8
values, with the bitfields replaced by bitmask constants.

CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18 12:54:24 +01:00
Dan Carpenter b07cabb836 USB: storage: ums-realtek: fix error code in rts51x_read_mem()
The rts51x_read_mem() function should return negative error codes.
Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3)
which is treated as success by the callers.

Fixes: 065e60964e ("ums_realtek: do not use stack memory for DMA")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304073504.GA26464@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-15 18:21:25 +01:00
Christoph Hellwig ce70fd9a55 scsi: core: Remove the cmd field from struct scsi_request
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage.  Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs.  On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.

Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:49 -05:00
Bart Van Assche 5dfcf1ad93 scsi: usb: Stop using the SCSI pointer
Set scsi_host_template.cmd_size instead of using the SCSI pointer for
storing driver-private data. Change the type of the argument of
uas_add_work() from struct uas_cmd_info * into struct scsi_cmnd * because
it is easier to convert a SCSI command pointer into a uas_cmd_info pointer
than the other way around.

This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-46-bvanassche@acm.org
Cc: linux-usb@vger.kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22 21:11:07 -05:00
Bart Van Assche 53555fb7bc scsi: Remove drivers/scsi/scsi.h
The following two header files have the same file name: include/scsi/scsi.h
and drivers/scsi/scsi.h. This is confusing. Remove the latter since the
following note was added in drivers/scsi/scsi.h in 2004:

"NOTE: this file only contains compatibility glue for old drivers. All
these wrappers will be removed sooner or later. For new code please use
the interfaces declared in the headers in include/scsi/"

Link: https://lore.kernel.org/r/20220218195117.25689-7-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22 21:11:02 -05:00
Sebastian Andrzej Siewior 23fe075519 scsi: usb: storage: Complete the SCSI request directly
The USB storage driver can complete its requests directly from a kernel
thread. Use scsi_done_direct() to avoid waking ksoftirqd.

Link: https://lore.kernel.org/r/20220201210954.570896-3-sebastian@breakpoint.cc
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07 23:14:15 -05:00
Alan Stern 5b67b31503 usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge
Two people have reported (and mentioned numerous other reports on the
web) that VIA's VL817 USB-SATA bridge does not work with the uas
driver.  Typical log messages are:

[ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00
[ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[ 3606.328584] scsi host14: uas_eh_device_reset_handler success

Surprisingly, the devices do seem to work okay for some other people.
The cause of the differing behaviors is not known.

In the hope of getting the devices to work for the most users, even at
the possible cost of degraded performance for some, this patch adds an
unusual_devs entry for the VL817 to block it from binding to the uas
driver by default.  Users will be able to override this entry by means
of a module parameter, if they want.

CC: <stable@vger.kernel.org>
Reported-by: DocMAX <mail@vacharakis.de>
Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-25 18:42:52 +01:00
Linus Torvalds 57ea81971b USB/Thunderbolt changes for 5.17-rc1
Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1.
 
 Nothing major in here, just lots of little updates and cleanups.  These
 include:
 	- some USB header fixes picked from Ingo's header-splitup work
 	- more USB4/Thunderbolt hardware support added
 	- USB gadget driver updates and additions
 	- USB typec additions (includes some acpi changes, which were
 	  acked by the ACPI maintainer)
 	- core USB fixes as found by syzbot that were too late for
 	  5.16-final
 	- USB dwc3 driver updates
 	- USB dwc2 driver updates
 	- platform_get_irq() conversions of some USB drivers
 	- other minor USB driver updates and additions
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd66Tg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynH2wCfetT95966ZMICGDmdwZpEBBYCO1wAn2v9Pwd2
 CeXrMLdaOr9WkV2P6mE5
 =K4Jh
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for
  5.17-rc1.

  Nothing major in here, just lots of little updates and cleanups. These
  include:

   - some USB header fixes picked from Ingo's header-splitup work

   - more USB4/Thunderbolt hardware support added

   - USB gadget driver updates and additions

   - USB typec additions (includes some acpi changes, which were acked
     by the ACPI maintainer)

   - core USB fixes as found by syzbot that were too late for 5.16-final

   - USB dwc3 driver updates

   - USB dwc2 driver updates

   - platform_get_irq() conversions of some USB drivers

   - other minor USB driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
  docs: ABI: fixed formatting in configfs-usb-gadget-uac2
  usb: gadget: u_audio: Subdevice 0 for capture ctls
  usb: gadget: u_audio: fix calculations for small bInterval
  usb: dwc2: gadget: initialize max_speed from params
  usb: dwc2: do not gate off the hardware if it does not support clock gating
  usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
  headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
  USB: common: debug: add needed kernel.h include
  headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
  headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
  headers/prep: usb: gadget: Fix namespace collision
  USB: core: Fix bug in resuming hub's handling of wakeup requests
  USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
  usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
  usb: gadget: clear related members when goto fail
  usb: gadget: don't release an existing dev->buf
  usb: dwc2: Simplify a bitmap declaration
  usb: Remove usb_for_each_port()
  usb: typec: port-mapper: Convert to the component framework
  usb: Link the ports to the connectors they are attached to
  ...
2022-01-12 11:27:57 -08:00
luo penghao 3254a73fb2 usb-storage: Remove redundant assignments
The assignments in these two places will be overwritten, so they
should be deleted.

The clang_analyzer complains as follows:

drivers/usb/storage/sierra_ms.c:

Value stored to 'retries' is never read
Value stored to 'result' is never read

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211230063819.586428-1-luo.penghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 12:10:17 +01:00
Christoph Hellwig f3fa33acca block: remove the ->rq_disk field in struct request
Just use the disk attached to the request_queue instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:41:29 -07:00
Linus Torvalds fe91c4725a SCSI misc on 20211105
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
 target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
 fixes.  Notable core changes are the removal of scsi->tag which caused
 some churn in obsolete drivers and a sweep through all drivers to call
 scsi_done() directly instead of scsi->done() which removes a pointer
 indirection from the hot path and a move to register core sysfs files
 earlier, which means they're available to KOBJ_ADD processing, which
 necessitates switching all drivers to using attribute groups.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
 vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
 RG8vBdpxMudlvxAPi/A=
 =BSFz
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...
2021-11-05 08:42:02 -07:00
James Buren 05c8f1b67e usb-storage: Add compatibility quirk flags for iODD 2531/2541
These drive enclosures have firmware bugs that make it impossible to mount
a new virtual ISO image after Linux ejects the old one if the device is
locked by Linux. Windows bypasses this problem by the fact that they do
not lock the device. Add a quirk to disable device locking for these
drive enclosures.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Buren <braewoods+lkml@braewoods.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18 17:05:34 +02:00
Bart Van Assche 01e570feba scsi: usb: Switch to attribute groups
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.

Link: https://lore.kernel.org/r/20211012233558.4066756-46-bvanassche@acm.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:45:59 -04:00
Bart Van Assche af049dfd0b scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions
The DEF_SCSI_QCMD() macro passes the addresses of the SCSI host lock and
also that of the scsi_done function to the queuecommand_lck() function
implementations. Remove the 'scsi_done' argument since its address is
now a constant and instead call 'scsi_done' directly from inside the
queuecommand_lck() functions.

Link: https://lore.kernel.org/r/20211007204618.2196847-14-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:32:16 -04:00
Bart Van Assche 46c97948e9 scsi: usb: Call scsi_done() directly
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.

Link: https://lore.kernel.org/r/20211007204618.2196847-10-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:31:43 -04:00
Ondrej Zary b55d37ef6b usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 16:37:52 +02:00
Julian Sikorski ce1c42b4da Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
Further testing has revealed that LaCie Rugged USB3-FW does work with
uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled.

Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/
Cc: stable <stable@vger.kernel.org>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 16:37:26 +02:00
Linus Torvalds a9c9a6f741 SCSI misc on 20210902
This series consists of the usual driver updates (ufs, qla2xxx,
 target, smartpqi, lpfc, mpt3sas).  The core change causing the most
 churn was replacing the command request field request with a macro,
 allowing us to offset map to it and remove the redundant field; the
 same was also done for the tag field.  The most impactful change is
 the final removal of scsi_ioctl, which has been deprecated for over a
 decade.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
 4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
 hC3BUEW8f2LLnujWanQ=
 =lC5o
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, qla2xxx,
  target, smartpqi, lpfc, mpt3sas).

  The core change causing the most churn was replacing the command
  request field request with a macro, allowing us to offset map to it
  and remove the redundant field; the same was also done for the tag
  field.

  The most impactful change is the final removal of scsi_ioctl, which
  has been deprecated for over a decade"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
  scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
  scsi: ufs: ufs-exynos: Fix static checker warning
  scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
  scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
  scsi: lpfc: Copyright updates for 14.0.0.1 patches
  scsi: lpfc: Update lpfc version to 14.0.0.1
  scsi: lpfc: Add bsg support for retrieving adapter cmf data
  scsi: lpfc: Add cmf_info sysfs entry
  scsi: lpfc: Add debugfs support for cm framework buffers
  scsi: lpfc: Add support for maintaining the cm statistics buffer
  scsi: lpfc: Add rx monitoring statistics
  scsi: lpfc: Add support for the CM framework
  scsi: lpfc: Add cmfsync WQE support
  scsi: lpfc: Add support for cm enablement buffer
  scsi: lpfc: Add cm statistics buffer support
  scsi: lpfc: Add EDC ELS support
  scsi: lpfc: Expand FPIN and RDF receive logging
  scsi: lpfc: Add MIB feature enablement support
  scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
  scsi: fc: Add EDC ELS definition
  ...
2021-09-02 15:09:46 -07:00
Bart Van Assche 9c4a6d5281 scsi: usb-storage: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-52-bvanassche@acm.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:42 -04:00
Julian Sikorski 6abf2fe6b4 USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start

Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21 09:15:45 +02:00
Hannes Reinecke 464a00c9e0 scsi: core: Kill DRIVER_SENSE
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().

Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.

[mkp: fix zeroday srp warning]

Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fix
2021-05-31 22:48:21 -04:00
Colin Ian King 95dbac94da usb: storage: datafab: remove redundant assignment of variable result
The variable result is being assigned with a value that is
never read, the assignment is redundant and can be removed.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210420113818.378478-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22 10:52:10 +02:00
Alan Stern 546aa0e4ea usb-storage: Add quirk to defeat Kindle's automatic unload
Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE.  It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command.  The reason for this
behavior isn't clear, although it's not hard to make some guesses.

At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).

To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set.  This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.

Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices.  However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval.  Changing the driver's
behavior is safer and has minimal overhead.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17 21:30:15 +01:00