The ACPICA's strategy with respect to the handling of memory mappings
associated with memory operation regions is to avoid mapping the
entire region at once which may be problematic at least in principle
(for example, it may lead to conflicts with overlapping mappings
having different attributes created by drivers). It may also be
wasteful, because memory opregions on some systems take up vast
chunks of address space while the fields in those regions actually
accessed by AML are sparsely distributed.
For this reason, a one-page "window" is mapped for a given opregion
on the first memory access through it and if that "window" does not
cover an address range accessed through that opregion subsequently,
it is unmapped and a new "window" is mapped to replace it. Next,
if the new "window" is not sufficient to acess memory through the
opregion in question in the future, it will be replaced with yet
another "window" and so on. That may lead to a suboptimal sequence
of memory mapping and unmapping operations, for example if two fields
in one opregion separated from each other by a sufficiently wide
chunk of unused address space are accessed in an alternating pattern.
The situation may still be suboptimal if the deferred unmapping
introduced previously is supported by the OS layer. For instance,
the alternating memory access pattern mentioned above may produce
a relatively long list of mappings to release with substantial
duplication among the entries in it, which could be avoided if
acpi_ex_system_memory_space_handler() did not release the mapping
used by it previously as soon as the current access was not covered
by it.
In order to improve that, modify acpi_ex_system_memory_space_handler()
to preserve all of the memory mappings created by it until the memory
regions associated with them go away.
Accordingly, update acpi_ev_system_memory_region_setup() to unmap all
memory associated with memory opregions that go away.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiang Li <xiang.z.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2c2eefa827bd37297f5f9ca4b263fcba829aaf3f
Link: https://github.com/acpica/acpica/commit/2c2eefa8
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4b0e043386c7e698bea9e862f60a388647f56622
Previously, there was a mixup where _NIG required one parameter and
_NIH required zero parameters. This changes swaps these parameter
requirements. Now this change requires _NIH to be called with one
parameter and _NIG requires zero.
Link: https://github.com/acpica/acpica/commit/4b0e0433
Reported-by: Paul A Lohr <paul.a.lohr@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3244c1eeba9f9fb9ccedb875f7923a3d85e0c6aa
The status chekcs are used to to avoid NULL pointer dereference on
field objects
Link: https://github.com/acpica/acpica/commit/3244c1ee
Reported-by: Kurt Kennett <kurt_kennett@hotmail.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cd66d0a50fdc9cc4dcd998e08e7aa3c4154bea2d
Disassembler is intended to emit existing ASL code as-is. Therefore,
error messages emitted during disassembly should be ignored or
handled in a way such that the disassembler can continue to parse the
AML. This change ignores AE_ALREADY_EXISTS errors during the deferred
Op parsing for create operators in order to complete parsing ASL
termlists.
Link: https://github.com/acpica/acpica/commit/cd66d0a5
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8296a24f33984c26a61103c590b049de3c9b61ff
This commit cleans up the code by moving the global definition out of
dbhistry.c to acglobal.h.
Link: https://github.com/acpica/acpica/commit/8296a24f
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0ebacf12b8ca66ce6d3fce4d349b3f2448da18cb
A linux-based static analyzer (sparse) caught this as a warning.
Making this variable static will result in better optimizations and
ensure that this variable does not get used outside of this file.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
[ek: commit message]
Link: https://github.com/acpica/acpica/commit/0ebacf12
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica:
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some
dead code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu).
-----BEGIN PGP SIGNATURE-----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=kQmH
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal
Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some dead
code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu)"
* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPICA: Update version to 20200214
ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
ACPI: EC: Consolidate event handler installation code
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
acpi/x86: add a kernel parameter to disable ACPI BGRT
x86/acpi: make "asmlinkage" part first thing in the function definition
ACPI: list_for_each_safe() -> list_for_each_entry_safe()
ACPI: video: remove redundant assignments to variable result
ACPI: OSL: Add missing __acquires/__releases annotations
ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
ACPI / AC: Cleanup DMI quirk table
ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
ACPI: EC: Simplify acpi_ec_add()
ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
ACPI: EC: Avoid passing redundant argument to functions
ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
...
* acpica:
ACPICA: Update version to 20200214
ACPICA: Fix a couple of typos
ACPICA: use acpi_size instead of u32 for prefix_path_length
ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32
ACPICA: cast the result of the pointer difference to u32
ACPICA: Table Manager: Update comments in a function header
ACPICA: Enable sleep button on ACPI legacy wake
ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events.
ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree
ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
This is the result of squashing the following ACPICA commit ID's:
6803997e5b4f3635cea6610b51ff69e29d251de3
f31cdf8bfda22fe265c1a176d0e33d311c82a7f7
This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.
Link: https://github.com/acpica/acpica/commit/f31cdf8b
Link: https://github.com/acpica/acpica/commit/6803997e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This contains changes for the following ACPICA commit ID's:
8f99a6ccd3b8e5c3d3d68c53fdbb054c2477eeb4
d30647af53abd334cbcf6362387464ea647bac9e
d3c5fb4cf5b2880d789c987eb847fc3de3774abc
On 32-bit, the provided sprintf() is non-functional: with a size of
ACPI_UINT32_MAX, String + Size will wrap, meaning End < Start, and
acpi_ut_bound_string_output() will never output anything as a result.
The symptom we saw of this was acpixtract failing to output anything.
Link: https://github.com/acpica/acpica/commit/8f99a6cc
Link: https://github.com/acpica/acpica/commit/d30647af
Link: https://github.com/acpica/acpica/commit/d3c5fb4c
Signed-off-by: MSathieu <18145111+MSathieu@users.noreply.github.com>
Signed-off-by: John Levon <john.levon@joyent.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 825c53661cacc7e3dab4844588201846143bd1b7
This variable was re-defined in a file specific to acpiexec. Remove
the redundant declaration and move the initialize to the debugger.
Patch based on suggestions by David Seifert and Benjamin Berg.
Link: https://github.com/acpica/acpica/commit/825c5366
Reported-by: David Seifert <soap@gentoo.org>
Reported-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 811e69a59cb4189ebf8b882eba74c881f598a239
The former was proposed during specification discussions but it was
dropped. This keyword was introduced to the ACPICA code base by
mistake so this commit changes the keyword representing Platform
Communication Channel to be PCC.
Link: https://github.com/acpica/acpica/commit/811e69a5
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The check carried out by acpi_any_gpe_status_set() is not precise enough
for the suspend-to-idle implementation in Linux and in some cases it is
necessary make it skip one GPE (specifically, the EC GPE) from the check
to prevent a race condition leading to a premature system resume from
occurring.
For this reason, redefine acpi_any_gpe_status_set() to take the number
of a GPE to skip as an argument.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629
Tested-by: Ondřej Caletka <ondrej@caletka.cz>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") overlooked the fact that fixed events can wake
up the system too and broke RTC wakeup from suspend-to-idle as a
result.
Fix this issue by checking the fixed events in acpi_s2idle_wake() in
addition to checking wakeup GPEs and break out of the suspend-to-idle
loop if the status bits of any enabled fixed events are set then.
Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Squashed ACPICA commit e93a53d4d312a83a3ec72aa9cfb12d781b4fefca
and df52c574572344cd9095b66a0f580d51249deb2a
Submitted by: ehaouas@noos.fr
Link: https://github.com/acpica/acpica/commit/e93a53d4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
strlen() returns a size_t, so use acpi_size instead of u32 for
prefix_path_length.
ACPICA commit 0f64c317e769a63679442404421da1d5bd61068a
Link: https://github.com/acpica/acpica/commit/0f64c317
Signed-off-by: Sven Barth <sb@miray.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d216e4c8d886d7fb82697948c4fee8a5777a1a5a
Link: https://github.com/acpica/acpica/commit/d216e4c8
Signed-off-by: Sven Barth <sb@miray.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Altnatively we could declare aml_length as acpi_size, but then one
would need to cast at the assignment for method_obj->method.aml_length
ACPICA commit 72805936603fcf84e98f1b89bf99b5101af27fb8
Link: https://github.com/acpica/acpica/commit/72805936
Signed-off-by: Sven Barth <sb@miray.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update acpi_get_table_header to remove text stating that the caller
must unmap any returned memory.
ACPICA commit 4f3a235cf0044b2d91958b1f99b4ca824c63f948
Link: https://github.com/acpica/acpica/commit/4f3a235c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 9383f5b01091e432c05f802a57edc20d329eec1f
Hibernation (S4) is triggered in a guest when it recieves a sleep
trigger from the hypervisor. When the guest resumes from this power
state, it does not see the sleep_enabled bit. In otherwords, the sleep
button is not enabled on waking from an S4 state. This causes
subsequent invocation of sleep state to fail in the guest.
Fix this problem by enabling the sleep button in ACPI legacy wake.
Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
Reviewed-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
[ ek: changelog]
Link: https://github.com/acpica/acpica/commit/9383f5b0
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit af4462c6f41ebc9bf63b5370818c5fd96524e7a9
Link: https://github.com/acpica/acpica/commit/af4462c6
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5d160cc86cca440eac7055f981e48bc14d4eb9f7
This decouples cv_init_file_tree from acpi_gbl_output_file and allows
it to be called independently of acpi_os_redirect_output()
Link: https://github.com/acpica/acpica/commit/5d160cc8
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3ba6fa55a4a32d8b6fc28f9f285506ea0e359296
These parameters can be computed inside of the function from the
Table parameter.
Link: https://github.com/acpica/acpica/commit/3ba6fa55
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a new helper function, acpi_any_gpe_status_set(), for
checking the status bits of all enabled GPEs in one go.
It is needed to distinguish spurious SCIs from genuine ones when
deciding whether or not to wake up the system from suspend-to-idle.
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8b9c69d0984067051ffbe8526f871448ead6a26b
Link: https://github.com/acpica/acpica/commit/8b9c69d0
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 79a466b64e6af36cc83102f05915e56cb7dd89ab
According to table 19-419 of the ACPI 6.3 specification, buffer_fields
created using the ASL create_field() Operator have been treated as
integers if the buffer_field is small enough to fit inside of an ASL
integer (32-bits or 64-bits depending on the definition block
revision). If they are larger, buffer fields are treated as ASL
Buffer objects. However, this is not true for other AML interpreter
implementations.
It has been discovered that other AML interpreters always treat
buffer fields created by create_field() as a buffer regardless of the
length of the buffer field.
More specifically, the Microsoft AML interpreter always treats buffer
fields created by the create_field() operator as buffer. ACPICA
currently does this only when the field size is larger than the
maximum integer width. This causes problems with AML code shipped in
Microsoft Surface devices.
More details:
The control methods in these devices determine the success of an ASL
control method execution by examining the type resulting from storing
a buffer field created by a create_field() operator. On success, a
Buffer object is expected, on failure an Integer containing an error
code. This buffer object is created with a dynamic size via the
create_field() operator. Due to the difference in behavior, Buffer
values of small size are however converted to Integers and thus
interpreted by the control method as having failed, whereas in
reality it succeeded. Below is an example of a control method called
TEST that illustrates this behavior.
Method (CBUF) // Create a Buffer field
{
/*
* Depending on the value of RAND, ACPICA interpreter will treat
* BF00 as an integer or buffer.
*/
create_field (BUFF, 0, RAND, BF00)
return (BF00)
}
Method (TEST)
{
/*
* Storing the value returned by CBUF to local0 will result in
* implicit type conversion outlined in the ACPI specification.
*
* ACPICA will treat local0 like an ASL integer if RAND is less
* than or equal to 64 or 32 (depending on the definition_block
* revision). If RAND is greater, it will be treated like an ASL
* buffer. Other implementations treat local0 like an ASL buffer
* regardless of the value of RAND.
*/
local0 = CBUF()
/*
* object_type of 0x03 represents an ASL Buffer
*/
if (object_type (Local0) != 0x03)
{
// Error on ACPICA if RAND is small enough
}
else
{
/*
* Success on APICA if RAND is large enough
* Other implementations always take this path because local0
* is always treated as a buffer.
*/
}
}
This change prohibits the previously mentioned integer conversion to
match other AML interpreter implementations (Microsoft) that do not
conform to the ACPI specification.
Link: https://github.com/acpica/acpica/commit/79a466b6
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 29cc8dbc5463a93625bed87d7550a8bed8913bf4
create_buffer_field is a deferred op that is typically processed in
load pass 2. However, disassembly of control method contents walk the
parse tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are
processed in a later walk. This is a problem when there is a control
method that has the same name as the AML_CREATE object. In this case,
any use of the name segment will be detected as a method call rather
than a reference to a buffer field. If this is detected as a method
call, it can result in a mal-formed parse tree if the control methods
have parameters.
This change in processing AML_CREATE ops earlier solves this issue by
inserting the named object in the ACPI namespace so that references
to this name would be detected as a name string rather than a method
call.
Link: https://github.com/acpica/acpica/commit/29cc8dbc
Reported-by: Elia Geretto <elia.f.geretto@gmail.com>
Tested-by: Elia Geretto <elia.f.geretto@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7aa72c5fdf75c5b80adf758980e06bcafb7f8670
There is a spelling mistake in an error message. Fix it.
Link: https://github.com/acpica/acpica/commit/7aa72c5f
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1b7228072f254a5b02625586ff7d561757b7fc2d
By removing leading whitespaces, the conversion computes the
correct number of elements in a given buffer or field encoding
that contains leading whitespaces.
Link: https://github.com/acpica/acpica/commit/1b722807
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 367b363edc5fa1f93bbc14e4a1e05f34fef765a2
acpiexec allows a user to provide a file that indicates values to
initialize named objects during table load with the -fi option. This
can provide more accurate simulation by setting named objects to
values found during OS runtime.
Previously, this option only supported integer objects. This change
adds user initialization support for field units, strings, buffers,
and packages.
Link: https://github.com/acpica/acpica/commit/367b363e
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d509afa88e9415f13a3283c38ce9ee034634ae24
Since field unit data output from the debugger are now surrounded by
braces '{', support has been added to acpi_db_get_next_token to recognize
strings beginning with this character as a ACPI_TYPE_FIELD_UNIT.
Link: https://github.com/acpica/acpica/commit/d509afa8
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 76ca57291d007d33087982a4b28cd1ee9bcd37a6
This helps differentiate the type of named objects between field
units and buffers. In other words, without this symbol, it would be
difficult to tell whether a particular named object is a buffer or a
field unit.
Link: https://github.com/acpica/acpica/commit/76ca5729
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpiexec, this can be invoked by typing "fields" followed by a
number representing the address space ID of that field.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit fb18935fcf940c5854a055975c6b9ee31f0e1a5a
Link: https://github.com/acpica/acpica/commit/fb18935f
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d1716a829d19be23277d9157c575a03b9abb7457
For unloading an ACPI table, it is necessary to provide the index of
the table. The method intended for dynamically loading or hotplug
addition of tables, acpi_load_table(), should provide this information
via an optional pointer to the loaded table index.
This patch fixes the table unload function of acpi_configfs.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: d06c47e3dd ("ACPI: configfs: Resolve objects on host-directed table loads")
Link: https://github.com/acpica/acpica/commit/d1716a82
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c69369cd9cf0134e1aac516e97d612947daa8dc2
Unload a table via the table_index.
Link: https://github.com/acpica/acpica/commit/c69369cd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 54b3aefb5de860306951c8c3339b1c37dcdf1b39
V8.0.1: Fixed all "dead assignment" warnings.
Link: https://github.com/acpica/acpica/commit/54b3aefb
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7bc16c650317001bc82d4bae227b888a49c51f5e
Avoid possible overflow from get_tick_count. Also, cast math
using ACPI_100NSEC_PER_MSEC to uint64.
Link: https://github.com/acpica/acpica/commit/7bc16c65
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1f08279b3eb13f17004159c28c391a390cd68feb
Changes/fixes From Clang V5.0.1. Mostly "set but never read"
warnings.
Link: https://github.com/acpica/acpica/commit/1f08279b
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA code in the kernel to upstream revision 20190816
including:
* Internal limits change to support larger systems (Bob Moore).
* Macros clean up (Bob Moore).
* printf format string fixes (Bob Moore).
* Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore).
* Tools improvements (Bob Moore, Colin Ian King).
* Windows _OSI support fixes (Jung-uk Kim).
- Improve memory hot-add support in the ACPI HMAT handling code (Dan
Williams, Keith Busch).
- Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to
save and restore private registers during system-wide suspend and
resume on systems with the Lynxpoint PCH (Jarkko Nikula).
- Convert the ACPI documentation related to LEDs to ReST (Sakari
Ailus).
- Fix assorted issues and make assorted minor improvements in the
ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey
Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang,
YueHaibing).
-----BEGIN PGP SIGNATURE-----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=2Tf0
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include an ACPICA update (to upstream revision 20190816),
improvements of support for memory hot-add in the HMAT handling code
and some assorted fixes and cleanups.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20190816
including:
* Internal limits change to support larger systems (Bob Moore).
* Macros clean up (Bob Moore).
* printf format string fixes (Bob Moore).
* Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore).
* Tools improvements (Bob Moore, Colin Ian King).
* Windows _OSI support fixes (Jung-uk Kim).
- Improve memory hot-add support in the ACPI HMAT handling code (Dan
Williams, Keith Busch).
- Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to
save and restore private registers during system-wide suspend and
resume on systems with the Lynxpoint PCH (Jarkko Nikula).
- Convert the ACPI documentation related to LEDs to ReST (Sakari
Ailus).
- Fix assorted issues and make assorted minor improvements in the
ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey
Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang,
YueHaibing)"
* tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
ACPI / PCI: fix acpi_pci_irq_enable() memory leak
ACPI: custom_method: fix memory leaks
ACPI: thermal: Remove redundant acpi_has_method() calls
ACPI / CPPC: do not require the _PSD method
ACPI: SBS: remove unused const variable 'SMBUS_PEC'
ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint
ACPI/PCI: Remove surplus parentheses from a return statement
ACPICA: Update version to 20190816.
ACPICA: Add "Windows 2019" string to _OSI support.
ACPICA: Differentiate Windows 8.1 from Windows 8.
ACPICA: Fully deploy ACPI_PRINTF_LIKE macro
ACPICA: iASL,acpi_dump: Improve y/n query
ACPICA: Fix issues with arg types within printf format strings
ACPICA: Macros: remove pointer math on a null pointer
ACPICA: Increase total number of possible Owner IDs
ACPICA: Debugger: remove redundant assignment on obj_desc
Documentation: ACPI: DSD: Convert LED documentation to ReST
ACPI / APEI: Release resources if gen_pool_add() fails
HMAT: Skip publishing target info for nodes with no online memory
HMAT: Register attributes for memory hot add
...
ACPICA commit 32fffb242800b0202986e86d9b0e16f88a23de66
Link: https://github.com/acpica/acpica/commit/32fffb24
Signed-off-by: Jung-uk Kim <jkim@free_BSD.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 66db7b38f61e63f11e48a0ea993d92b12e0a17ca
Link: https://github.com/acpica/acpica/commit/66db7b38
Signed-off-by: Jung-uk Kim <jkim@free_BSD.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d06def132a8852d02c9c7fee60f17b2011066e8e
Macro was not being used across all "printf-like" functions.
Also, clean up all calls to such functions now that they are
analyzed by the compiler (gcc). Both in 32-bit mode and 64-bit
mode.
Link: https://github.com/acpica/acpica/commit/d06def13
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1f1652dad88b9d767767bc1f7eb4f7d99e6b5324
From 255 to 4095 possible IDs.
Link: https://github.com/acpica/acpica/commit/1f1652da
Reported-by: Hedi Berriche <hedi.berriche @hpe.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f530f1acb3128136ad97c715fdaebbbeff283ee2
Pointer obj_desc is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Link: https://github.com/acpica/acpica/commit/f530f1ac
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases it is useful to know whether or not the
acpi_ev_detect_gpe() called by acpi_dispatch_gpe() has found
the GPE to be active, so return the return value of it (whose
data type is u32) from latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
ACPICA commit c7ef9f3526765bed8930825dda1eed1a274b9668
Use the common internal "initialize objects" interface
Affects:
Load()
load_table()
acpi_load_table
Link: https://github.com/acpica/acpica/commit/c7ef9f35
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit c522ad0637 ("ACPICA: Update table load object
initialization") as it causes systems to hang on attempts to load
OEM ACPI tables.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c7ef9f3526765bed8930825dda1eed1a274b9668
Use the common internal "initialize objects" interface
Affects:
Load()
load_table()
acpi_load_table
Link: https://github.com/acpica/acpica/commit/c7ef9f35
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 106c72a97f5ca972f29956e5e9a0429b8c4a2723
1) Do not allow the objects to be initialized twice
2) Only package objects require a deferred initialization
3) Cleanup initialization output
Link: https://github.com/acpica/acpica/commit/106c72a9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1ca34b1a7b960ef321eae5dcddfff77707c88aef
There have been several places that have been calling functions
regarding module level code blocks. This change removes all old
vestiges in the codebase. This is dead code.
Link: https://github.com/acpica/acpica/commit/1ca34b1a
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 76658f55d8cc498a763bdb92f8e0d934822a129c
For the objects that are created by default (_GPE, _SB_, etc)
there is no need to use the heavyweight ns_lookup function.
Instead, simply create each object and link it in as the namespace
is built.
Link: https://github.com/acpica/acpica/commit/76658f55
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI GPEs (other than the EC one) can be enabled in two situations.
First, the GPEs with existing _Lxx and _Exx methods are enabled
implicitly by ACPICA during system initialization. Second, the
GPEs without these methods (like GPEs listed by _PRW objects for
wakeup devices) need to be enabled directly by the code that is
going to use them (e.g. ACPI power management or device drivers).
In the former case, if the status of a given GPE is set to start
with, its handler method (either _Lxx or _Exx) needs to be invoked
to take care of the events (possibly) signaled before the GPE was
enabled. In the latter case, however, the first caller of
acpi_enable_gpe() for a given GPE should not be expected to care
about any events that might be signaled through it earlier. In
that case, it is better to clear the status of the GPE before
enabling it, to prevent stale events from triggering unwanted
actions (like spurious system resume, for example).
For this reason, modify acpi_ev_add_gpe_reference() to take an
additional boolean argument indicating whether or not the GPE
status needs to be cleared when its reference counter changes from
zero to one and make acpi_enable_gpe() pass TRUE to it through
that new argument.
Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Reported-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an ACPI SSDT overlay is loaded after built-in tables
have been loaded e.g. via configfs or efivar_ssdt_load()
it is necessary to rewalk the namespace to resolve
references. Without this, relative and absolute paths
like ^PCI0.SBUS or \_SB.PCI0.SBUS are not resolved
correctly.
Make configfs loads use the same method as efivar_ssdt_load().
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica:
ACPICA: Update version to 20190405
ACPICA: Namespace: add check to avoid null pointer dereference
ACPICA: Update version to 20190329
ACPICA: utilities: fix spelling of PCC to platform_comm_channel
ACPICA: Rename nameseg length macro/define for clarity
ACPICA: Rename nameseg compare macro for clarity
ACPICA: Rename nameseg copy macro for clarity
Revert commit c8b1917c89 ("ACPICA: Clear status of GPEs before
enabling them") that causes problems with Thunderbolt controllers
to occur if a dock device is connected at init time (the xhci_hcd
and thunderbolt modules crash which prevents peripherals connected
through them from working).
Commit c8b1917c89 effectively causes commit ecc1165b8b ("ACPICA:
Dispatch active GPEs at init time") to get undone, so the problem
addressed by commit ecc1165b8b appears again as a result of it.
Fixes: c8b1917c89 ("ACPICA: Clear status of GPEs before enabling them")
Link: https://lore.kernel.org/lkml/s5hy33siofw.wl-tiwai@suse.de/T/#u
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1132943
Reported-by: Michael Hirmke <opensuse@mike.franken.de>
Reported-by: Takashi Iwai <tiwai@suse.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7586a625f9c34c3169efd88470192bf63119e31a
Some ACPICA userspace tools call acpi_ut_subsystem_shutdown() during
cleanup and dereference a null pointer when cleaning up the
namespace.
Link: https://github.com/acpica/acpica/commit/7586a625
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5e5c349e73982aea5d9f74416c0b2eea1b0767a1
Link: https://github.com/acpica/acpica/commit/5e5c349e
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d
ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE
This clarifies that this is the length of an individual
nameseg, not the length of a generic namestring/namepath.
Improves understanding of the code.
Link: https://github.com/acpica/acpica/commit/24870bd9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5
ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG
This clarifies (1) this is a compare on 4-byte namesegs, not
a generic compare. Improves understanding of the code.
Link: https://github.com/acpica/acpica/commit/92ec0935
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 19c18d3157945d1b8b64a826f0a8e848b7dbb127
ACPI_MOVE_NAME changed to ACPI_COPY_NAMESEG
This clarifies (1) this is a copy operation, and
(2) it operates on ACPI name_segs.
Improves understanding of the code.
Link: https://github.com/acpica/acpica/commit/19c18d31
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b233720031a480abd438f2e9c643080929d144c3
ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.
During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.
Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.
A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.
Link: https://github.com/acpica/acpica/commit/b2337200
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475
Fixes: 4abb951b73 ("ACPICA: AML interpreter: add region addresses in global list during initialization")
Reported-by: Michael J Gruber <mjg@fedoraproject.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing
ACPI IRQs during suspend/resume") was added to stop clearing event
status bits unconditionally in the system-wide suspend and resume
paths. This was done because of an issue with a laptop lid appaering
to be closed even when it was used to wake up the system from suspend
(see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which
happened because event status bits were cleared unconditionally on
system resume. Though this change fixed the issue in the resume path,
it introduced regressions in a few suspend paths.
First regression was reported and fixed in the S5 entry path by commit
fa85015c0d ("ACPICA: Clear status of all events when entering S5").
Next regression was reported and fixed for all legacy sleep paths by
commit f317c7dc12 ("ACPICA: Clear status of all events when entering
sleep states"). However, there still is a suspend-to-idle regression,
since suspend-to-idle does not follow the legacy sleep paths.
In the suspend-to-idle case, wakeup is enabled as part of device
suspend. If the status bits of wakeup GPEs are set when they are
enabled, it causes a premature system wakeup to occur.
To address that problem, partially revert commit 18996f2db9 to
restore GPE status bits clearing before the GPE is enabled in
acpi_ev_enable_gpe().
Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Signed-off-by: Furquan Shaikh <furquan@google.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 205ac8fc721073f1e609df963b14ef2237aeba73
Link: https://github.com/acpica/acpica/commit/205ac8fc
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit a4849944e80f97970e99843f4975850753584a4e
This change adds PCC operation region support in the AML interpreter
and a default handler for acpiexec. According to the specification,
the PCC operation region performs a transaction when the COMD field
is written. This allows ASL to write data to other fields before
sending the data.
In order to accommodate this protocol, a temorary buffer is added
to the regionfield object to accumulate writes. If any offset that
spans COMD is written, the temporary buffer is sent to the PCC
operation region handler to be processed.
This change also renames the PCC keyword to platform_comm_channel.
Link: https://github.com/acpica/acpica/commit/a4849944
Reviewed-by: Kyle Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0015e2491bda996ddb9d56bfa4ee39644acbb22b
Link: https://github.com/acpica/acpica/commit/0015e249
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2efd616e5b1c960f407763e6782f7dc259ea55df
Attempting to improve error messages to clarify that errors
are bubbled up from the original error, possibly across nested
methods.
Link: https://github.com/acpica/acpica/commit/2efd616e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 349dd29335d6928f883bc95c614a0edd033141bb
- Fault on Field Units
- Some restructuring
- General cleanup of dbtest module
Link: https://github.com/acpica/acpica/commit/349dd293
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 387c850c5d49d09d7c2e70b2711e584ad83956a1
Nothing can be done with such a region. Just emit a warning so as
not to abort a table load or running method.
Link: https://github.com/acpica/acpica/commit/387c850c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 47f5607c204719d9239a12b889df725225098c8f
Module-level code refers to executable ASL code that runs during
table load. This is typically used in ASL to declare named objects
based on a condition evaluated during table load like so:
definition_block(...)
{
opreation_region (OPR1, system_memory, ...)
Field (OPR1)
{
FLD1, 8 /* Assume that FLD1's value is 0x1 */
}
/* The if statement below is referred to as module-level code */
If (FLD1)
{
/* Declare DEV1 conditionally */
Device (DEV1) {...}
}
Device (DEV2)
{
...
}
}
In legacy module-level code, the execution of the If statement
was deferred after other modules were loaded. The order of
code execution for the table above is the following:
1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Load DEV2 to the ACPI Namespace
4.) Execute If (FLD1) and load DEV1 if the condition is true
This legacy approach can be problematic for tables that look like the
following:
definition_block(...)
{
opreation_region (OPR1, system_memory, ...)
Field (OPR1)
{
FLD1, 8 /* Assume that FLD1's value is 0x1 */
}
/* The if statement below is referred to as module-level code */
If (FLD1)
{
/* Declare DEV1 conditionally */
Device (DEV1) {...}
}
Scope (DEV1)
{
/* Add objects DEV1's scope */
Name (OBJ1, 0x1234)
}
}
When loading this in the legacy approach, Scope DEV1 gets evaluated
before the If statement. The following is the order of execution:
1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Add OBJ1 under DEV1's scope -- ERROR. DEV1 does not exist
4.) Execute If (FLD1) and load DEV1 if the condition is true
The legacy approach can never succeed for tables like this due to the
deferral of the module-level code. Due to this limitation, a new
module-level code was developed. This new approach exeutes if
statements in the order that they appear in the definition block.
With this approach, the order of execution for the above defintion
block is as follows:
1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Execute If (FLD1) and load DEV1 because the condition is true
4.) Add OBJ1 under DEV1's scope.
Since DEV1 is loaded in the namespace in step 3, step 4 executes
successfully.
This change removes support for the legacy module-level code
execution. From this point onward, the new module-level code
execution will be the official approach.
Link: https://github.com/acpica/acpica/commit/47f5607c
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No need for the array of structs of function pointers when we can just
call the handfull of functions directly.
This could be further cleaned up if acpi_gbl_reduced_hardware was defined
true in the ACPI_REDUCED_HARDWARE case, but that's material for the next
round.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 62f4f98e941d86e41969bf2ab5a93b8dc94dc49e
The update includes userspace tool signons.
Link: https://github.com/acpica/acpica/commit/62f4f98e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f77565e28b90ee7e06f53a474183ef72300c3574
Dump entire object/buffer for any memory leaks detected by
the object/cache tracking mechanism.
Link: https://github.com/acpica/acpica/commit/f77565e2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f3198c12f2df9d170b3da891a180b774cfe01e59
Also adds a new firmware error function, acpi_bios_exception.
Link: https://github.com/acpica/acpica/commit/f3198c12
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-pci:
ACPI: Make PCI slot detection driver depend on PCI
ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
arm64: select ACPI PCI code only when both features are enabled
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset
ACPI: Allow CONFIG_PCI to be unset for reboot
ACPI: Move PCI reset to a separate function
Allow ACPI to be built without PCI support in place.
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit alters the coding style of the following commit to match
ACPICA to keep divergences between Linux and ACPICA at a minimum.
This is not intended to result in functional changes.
ae6b3e54aa
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sun Nov 18 20:25:35 2018 +0100
ACPICA: Fix handling of buffer-size in acpi_ex_write_data_to_field()
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds entry/exit messages for all objects that are evaluated.
Works for the kernel-level code as well as acpiexec. The "-eo"
flag enables acpiexec to display these messages.
The messages are very useful when debugging the flow of table
initialization.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jung-uk Kim <jkim@free_BSD.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Return AE_SUPPORT if encountered, fixes a previous fault if
encountered.
Note: Other ACPI implementations do not support this type of
construct.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add "0x" prefix for hex values.
Provides compatibility with other ACPI implementations.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit removes the use of ACPI_NO_METHOD_EXECUTE flag
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Latest windows string.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Generic Serial Bus transfers use a data struct like this:
struct gsb_buffer {
u8 status;
u8 len;
u8 data[0];
};
acpi_ex_write_data_to_field() copies the data which is to be written from
the source-buffer to a temp-buffer. This is done because the OpReg-handler
overwrites the status field and some transfers do a write + read-back.
Commit f99b89eefe ("ACPICA: Update for generic_serial_bus and
attrib_raw_process_bytes protocol") acpi_ex_write_data_to_field()
introduces a number of problems with this:
1) It drops a "length += 2" statement used to calculate the temp-buffer
size causing the temp-buffer to only be 1/2 bytes large for byte/word
transfers while it should be 3/4 bytes (taking the status and len field
into account). This is already fixed in commit e324e10109 ("ACPICA:
Update for field unit access") which refactors the code.
The ACPI 6.0 spec (ACPI_6.0.pdf) "5.5.2.4.5.2 Declaring and Using a
GenericSerialBusData Buffer" (page 232) states that the GenericSerialBus
Data Buffer Length field is only valid when doing a Read/Write Block
(AttribBlock) transfer, but since the troublesome commit we unconditionally
use the len field to determine how much data to copy from the source-buffer
into the temp-buffer passed to the OpRegion.
This causes 3 further issues:
2) This may lead to not copying enough data to the temp-buffer causing the
OpRegion handler for the serial-bus to write garbage to the hardware.
3) The temp-buffer passed to the OpRegion is allocated to the size
returned by acpi_ex_get_serial_access_length(), which may be as little
as 1, so potentially this may lead to a write overflow of the temp-buffer.
4) Commit e324e10109 ("ACPICA: Update for field unit access") drops a
length check on the source-buffer, leading to a potential read overflow
of the source-buffer.
This commit fixes all 3 remaining issues by not looking at the len field at
all (the interpretation of this field is left up to the OpRegion handler),
and copying the minimum of the source- and temp-buffer sizes from the
source-buffer to the temp-buffer.
This fixes e.g. an Acer S1003 no longer booting since the troublesome
commit.
Fixes: f99b89eefe (ACPICA: Update for generic_serial_bus and ...)
Fixes: e324e10109 (ACPICA: Update for field unit access)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enhance error detection by validating that all name_seg elements
within a name_path actually exist. The previous behavior was spotty
at best, and such errors could be improperly ignored at compile
time (never at runtime, however). There are two new error messages.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When building ACPICA in the Linux kernel with Clang with ACPI_DISASSEMBLER
not defined, we get a the following warning on variable display_op:
warning: variable 'display_op' set but not used [-Wunused-but-set-variable]
Fix this by refactoring display_op and parent_op code in a separate function.
Suggested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_gbl_group_module_level_code and acpi_gbl_execute_tables_as_methods were
used to enable different table load behavior. The different table
load behaviors are as follows:
A.) acpi_gbl_group_module_level_code enabled the legacy approach where
ASL if statements are executed after the namespace object has
been loaded.
B.) acpi_gbl_execute_tables_as_methods is currently used to enable the
table load to be a method invocation. This meaning that ASL If
statements are executed in-line rather than deferred until after
the ACPI namespace has been populated. This is the correct
behavior and option A will be removed in the future.
We do not support a table load behavior where these variables are
assigned the same value. In otherwords, we only support option A or B
and do not need acpi_gbl_group_module_level_code to enable A. From now on,
acpi_gbl_execute_tables_as_methods == 0 enables option A and
acpi_gbl_execute_tables_as_methods == 1 enables option B.
Note: option A is expected to be removed in the future and option B
will become the only supported table load behavior.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AML opcodes come in two lengths: 1-byte opcodes and 2-byte, extended opcodes.
If an error occurs due to illegal opcodes during table load, the AML parser
needs to continue loading the table. In order to do this, it needs to skip
parsing of the offending opcode and operands associated with that opcode.
This change fixes the AML parse loop to correctly skip parsing of incorrect
extended opcodes. Previously, only the short opcodes were skipped correctly.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The table load process omitted adding the operation region address
range to the global list. This omission is problematic because the OS
queries the global list to check for address range conflicts before
deciding which drivers to load. This commit may result in warning
messages that look like the following:
[ 7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213)
[ 7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
However, these messages do not signify regressions. It is a result of
properly adding address ranges within the global address list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These address spaces are defined by the ACPI spec to be
"always available", and thus _REG should never be run on them.
Provides compatibility with other ACPI implementations.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New file: exserial.c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mostly for access to Generic Serial Bus, but also cleanup
for the other fields.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Matches changes to iASL
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup for this write-then-read protocol. The ACPI specification
is rather unclear for the entire generic_serial_bus, but this
change works correctly on the Surface 3.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit fa85015c0d (ACPICA: Clear status of all events when entering
S5) made the sleep state entry code in ACPICA clear the status of all
ACPI events when entering S5 to fix a functional regression reported
against commit 18996f2db9 (ACPICA: Events: Stop unconditionally
clearing ACPI IRQs during suspend/resume). However, it is reported
now that the regression also affects system states other than S5 on
some systems and causes them to wake up from sleep prematurely.
For this reason, make the code in question clear the status of all
ACPI events when entering all sleep states (in addition to S5) to
avoid the premature wakeups (this may cause some wakeup events to
be missed in theory, but the likelihood of that is small and the
change here simply restores the previous behavior of the code).
Fixes: 18996f2db9 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume)
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: fa85015c0d ACPICA: Clear status ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Eliminates warnings only seen when acpiexec exits.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make reference counting diagnostics provide more information on
what has happened.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Field elements listed in the init file used to be initialized after
the table load and before executing module-level code blocks. The
recent changes in module-level code mean that the table load becomes
a method execution. If fields are used within module-level code and
we are executing with -fi option, then these values are populated
after the table has finished loading. This commit changes the
initialization of objects listed in the init file so that field unit
values are populated during the table load.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the disassembler is configured out (such as when the debugger
is part of a kernel), these debugger commands are disabled:
List
Disassemble
Further, the Debug (single-step) command is simplified because
each line of code cannot be disassembled.
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change skips the entire length of opcodes that open a scope
(Device, Scope, Processor, etc) if the creation of the op fails. The
failure could be caused by various errors including AE_ALREADY_EXISTS
and AE_NOT_FOUND.
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_ut_implicit_strtoul64() called acpi_ut_detect_hex_prefix() and
ignored the return value. Instead, use acpi_ut_remove_hex_prefix().
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In this case, the exception AE_ALREADY_EXISTS is more
appropriate.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The value coming from acpi_hw_read() should not be used if it
returns an error code, so check the status returned by it before
using that value in two places in acpi_hw_register_read().
Reported-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Macros to classify different AML exception codes have been added in
order to ignore the exceptions,
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
[ rjw: Fix damaged white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Previous change in the AML parser code blindly set all non-successful
dispatcher statuses to AE_OK. That approach is incorrect, though,
because successful control method invocations from module-level
return AE_CTRL_TRANSFER. Overwriting AE_OK to this status causes the
AML parser to think that there was no return value from the control
method invocation.
Fixes: 92c0f4af386 (ACPICA: AML Parser: ignore dispatcher error status during table load)
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The dispatcher and the executer process the parse nodes During table
load. Error status from the evaluation confuses the AML parser. This
results in the parser failing to complete parsing of the current
scope op which becomes problematic. For the incorrect AML below, _ADR
never gets created.
definition_block(...)
{
Scope (\_SB)
{
Device (PCI0){...}
Name (OBJ1, 0x0)
OBJ1 = PCI0 + 5 // Results in an operand error.
} // \_SB not closed
// parser looks for \_SB._SB.PCI0, results in AE_NOT_FOUND error
// Entire scope block gets skipped.
Scope (\_SB.PCI0)
{
Name (_ADR, 0x0)
}
}
Fix the above error by properly completing the initial \_SB scope
after an error by clearing errors that occur during table load. In
the above case, this means that OBJ1 = PIC0 + 5 is skipped.
Fixes: 5088814a6e (ACPICA: AML parser: attempt to continue loading table after error)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200363
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 3ddd3f6a94 (ACPICA: iASL compiler: allow compilation
of externals with paths that refer to existing names; upstream
ACPICA commit 9a252114197409290813bee570e9d53c22b99d32).
This was done in order to allow more relaxed usage of ASL external
declarations.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit b43eac6f33 (ACPICA: iASL: change processing of
external op namespace nodes for correctness; upstream ACPICA
commit aa866a9b4f24bbec9f158d10325b486d7d12d90f).
This was done in order to allow more relaxed usage of ASL external
declarations.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 18996f2db9 (ACPICA: Events: Stop unconditionally
clearing ACPI IRQs during suspend/resume) the status of ACPI events
is not cleared any more when entering the ACPI S5 system state (power
off) which causes some systems to power up immediately after turing
off power in certain situations.
That is a functional regression, so address it by making the code
clear the status of all ACPI events again when entering S5 (for
system-wide suspend or hibernation the clearing of the status of all
events is not desirable, as it might cause the kernel to miss wakeup
events sometimes).
Fixes: 18996f2db9 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume)
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Thomas Hänig <haenig@cosifan.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 5088814a6e (ACPICA: AML parser: attempt to continue loading
table after error) unintentionally added leading newlines to error
messages emitted by ACPICA which caused unexpected things to be
printed to the kernel log. Drop these newlines (which effectively
reverts the part of commit 5088814a6e adding them).
Fixes: 5088814a6e (ACPICA: AML parser: attempt to continue loading table after error)
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dell uses this string to activate Thunderbolt native mode on supported
machines.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Unload AML operator is no longer supported for the reasons below.
An AE_NOT_IMPLEMENTED exception is returned.
1) A correct implementation on at least some hosts may not be possible.
2) Other ACPI implementations do not correctly/fully support it.
3) It requires host device driver support which is not known to exist.
(To properly support namespace unload out from underneath.)
4) This AML operator has never been seen in the field.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change alters the parser so that the table load does not abort
upon an error.
Notable changes:
If there is an error while parsing an element of the termlist, we
will skip parsing the current termlist element and continue parsing
to the next opcode in the termlist.
If we get an error while parsing the conditional of If/Else/While or
the device name of Scope, we will skip the body of the statement all
together and pop the parser_state.
If we get an error while parsing the base offset and length of an
operation region declaration, we will remove the operation region
from the namespace.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Module-level code execution has no method arguments or locals,
so do not attempt to output values for these.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Debug level 0x00800000 will dump the current parse tree
just before it is deleted.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A bit of additional information which is usefull during debug.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These update the ACPICA code in the kernel to the 20180508 upstream
revision and make it support the RT patch, add CPPC v3 support to the
ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes
with the RTC, add quirks to the ACPI AC and battery drivers, and
update the ACPI SoC drivers.
Specifics:
- Update the ACPICA code in the kernel to the 20180508 upstream
revision including:
* iASL -tc option enhancement (Bob Moore).
* Debugger improvements (Bob Moore).
* Support for tables larger than 1 MB in acpidump/acpixtract
(Bob Moore).
* Minor fixes and cleanups (Colin Ian King, Toomas Soome).
- Make the ACPICA code in the kernel support the RT patch (Sebastian
Andrzej Siewior, Steven Rostedt).
- Add a kmemleak annotation to the ACPICA code (Larry Finger).
- Add CPPC v3 support to the ACPI CPPC library and fix two issues
related to CPPC (Prashanth Prakash, Al Stone).
- Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on
systems where WDAT clashes with the RTC SRAM (Mika Westerberg).
- Add some quirks to the ACPI AC and battery drivers (Carlo Caione,
Hans de Goede).
- Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD)
platforms (Akshu Agrawal, Hans de Goede).
- Fix up some assorted minor issues (Al Stone, Laszlo Toth,
Mathieu Malaterre).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=FAIF
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the 20180508 upstream
revision and make it support the RT patch, add CPPC v3 support to the
ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes
with the RTC, add quirks to the ACPI AC and battery drivers, and
update the ACPI SoC drivers.
Specifics:
- Update the ACPICA code in the kernel to the 20180508 upstream
revision including:
* iASL -tc option enhancement (Bob Moore).
* Debugger improvements (Bob Moore).
* Support for tables larger than 1 MB in acpidump/acpixtract (Bob
Moore).
* Minor fixes and cleanups (Colin Ian King, Toomas Soome).
- Make the ACPICA code in the kernel support the RT patch (Sebastian
Andrzej Siewior, Steven Rostedt).
- Add a kmemleak annotation to the ACPICA code (Larry Finger).
- Add CPPC v3 support to the ACPI CPPC library and fix two issues
related to CPPC (Prashanth Prakash, Al Stone).
- Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems
where WDAT clashes with the RTC SRAM (Mika Westerberg).
- Add some quirks to the ACPI AC and battery drivers (Carlo Caione,
Hans de Goede).
- Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD)
platforms (Akshu Agrawal, Hans de Goede).
- Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu
Malaterre)"
* tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks
ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM
mailbox: PCC: erroneous error message when parsing ACPI PCCT
ACPICA: Update version to 20180508
ACPICA: acpidump/acpixtract: Support for tables larger than 1MB
ACPI: APD: Add AMD misc clock handler support
clk: x86: Add ST oscout platform clock
ACPICA: Update version to 20180427
ACPICA: Debugger: Removed direct support for EC address space in "Test Objects"
ACPICA: Debugger: Add Package support for "test objects" command
ACPICA: Improve error messages for the namespace root node
ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list
ACPICA: vsnprintf: this statement may fall through
ACPICA: Tables: Fix spelling mistake in comment
ACPICA: iASL: Enhance the -tc option (create AML hex file in C)
ACPI: Add missing prototype_for arch_post_acpi_subsys_init()
ACPI / tables: improve comments regarding acpi_parse_entries_array()
ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock
ACPICA: provide abstraction for raw_spinlock_t
ACPI / CPPC: Fix invalid PCC channel status errors
...
* pm-pci:
PCI / PM: Clean up outdated comments in pci_target_state()
PCI / PM: Do not clear state_saved for devices that remain suspended
* acpi-pm:
ACPI: EC: Dispatch the EC GPE directly on s2idle wake
ACPICA: Introduce acpi_dispatch_gpe()
* pm-sleep:
PM / hibernate: Fix oops at snapshot_write()
PM / wakeup: Make s2idle_lock a RAW_SPINLOCK
PM / s2idle: Make s2idle_wait_head swait based
PM / wakeup: Make events_lock a RAW_SPINLOCK
PM / suspend: Prevent might sleep splats
* pm-avs:
PM / AVS: rockchip-io: add io selectors and supplies for PX30
In kernel 4.17.0-rcX, kmemleak reports 9 leaks with tracebacks similar to
the following:
unreferenced object 0xffff880224a077e0 (size 72):
comm "swapper/0", pid 1, jiffies 4294892358 (age 1022.636s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 0e 01 01 00 00 00 00 01 ................
00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000004f506615>] acpi_ut_create_internal_object_dbg+0x4d/0x10e
[<000000006e7730e3>] acpi_ds_build_internal_object+0xed/0x1cd
[<00000000272b7c73>] acpi_ds_build_internal_package_obj+0x245/0x3a2
[<000000000b64c50e>] acpi_ds_eval_data_object_operands+0x17b/0x21b
[<00000000589647ac>] acpi_ds_exec_end_op+0x433/0x6c1
[<000000001d69bcbf>] acpi_ps_parse_loop+0x926/0x9be
[<000000005d6fa97d>] acpi_ps_parse_aml+0x1a2/0x4af
[<00000000c4bef823>] acpi_ps_execute_table+0xbb/0x119
[<00000000fd9632e4>] acpi_ns_execute_table+0x20c/0x260
[<00000000e6ae17ac>] acpi_ns_parse_table+0x7d/0x1b3
[<0000000008e1e148>] acpi_ns_load_table+0x8d/0x1c0
[<000000009fc8346f>] acpi_tb_load_namespace+0x176/0x278
[<0000000073f98b3b>] acpi_load_tables+0x6e/0xfd
[<00000000d2ef13d2>] acpi_init+0x8c/0x340
[<000000007da19d8d>] do_one_initcall+0x46/0x1fa
[<0000000024681a1d>] kernel_init_freeable+0x1a2/0x237
According to gdb, the offending code is
object =
acpi_ut_allocate_object_desc_dbg(module_name, line_number,
component_id);
As it is not possible to unload the ACPI code to test that this is a real
leak and not a false positive, and that only these 9 appear no matter how
long the system is up, a kmemleak_not_leak(object) call is inserted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_dispatch_gpe() as a wrapper around acpi_ev_detect_gpe()
for checking if the given GPE (as represented by a GPE device handle
and a GPE number) is currently active and dispatching it (if that's
the case) outside of interrupt context.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpidump: Expand the table offset field to 32 bits.
acpixtract: Add support to handle the expanded field.
Backwards compatibility is maintained.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
None of the address spaces that require a communication protocol
are supported by the "Test Objects" command.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was missing in the initial implementation of "test objects".
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace "\___" with actual descriptive text.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a potenial infinite loop if acpi_rs_dump_byte_list is
called with a Length greater than 255 since the current loop
counter is just a u8 and will wrap to zero and never reach
the desired value in Length. Fix this by making the loop
counter the size type as Length.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[rjw:] Add an explicit switch () statement fall-through marker.
Signed-off-by: Toomas Soome <tsoome@me.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The spelling of "sucessfully" should be "successfully", fix this
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change improves the -tc option by:
1) Creates a unique symbol for the hex table, to simplify
creation of multiple tables (DSDT/SSDT).
2) Adds a protection #ifdef, similar to a .h file.
With assistance from:
Sami Mujawar, sami.mujawar@arm.com
Evan Lloyd, evan.lloyd@arm.com
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Completes the support and fixes a regression introduced in
version 20180209.
The regression caused package objects that were loaded by the Load and
loadTable operators. This created an error message like the following:
[ 0.251922] ACPI Error: No pointer back to namespace node in package
00000000fd2a44cd (20180313/dsargs-303)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199413
Fixes: 5a8361f7ec (ACPICA: Integrate package handling with module-level code)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We hit the following bug with -RT:
|BUG: scheduling while atomic: swapper/7/0/0x00000002
|Pid: 0, comm: swapper/7 Not tainted 3.6.11-rt28.19.el6rt.x86_64.debug #1
|Call Trace:
| rt_spin_lock+0x16/0x40
| __schedule_bug+0x67/0x90
| __schedule+0x793/0x7a0
| acpi_os_acquire_lock+0x1f/0x23
| acpi_write_bit_register+0x33/0xb0
| rt_spin_lock_slowlock+0xe5/0x2f0
| acpi_idle_enter_bm+0x8a/0x28e
…
As the acpi code disables interrupts in acpi_idle_enter_bm, and calls
code that grabs the acpi lock, it causes issues as the lock is currently
in RT a sleeping lock.
The lock was converted from a raw to a sleeping lock due to some
previous issues, and tests that showed it didn't seem to matter.
Unfortunately, it did matter for one of our boxes.
This patch converts the lock back to a raw lock. I've run this code on a
few of my own machines, one being my laptop that uses the acpi quite
extensively. I've been able to suspend and resume without issues.
[ tglx: Made the change exclusive for acpi_gbl_hardware_lock ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1360765565.23152.5.camel@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: shorten the backtrace, use the type acpi_raw_spinlock incl.
accessor]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This prepares the code for eventual removal of the original
style of deferred execution of the MLC.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This ensures that acpi_ev_fixed_event_detect() does not use fixed_status
and and fixed_enable as uninitialized variables.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Was acpi_gbl_parse_table_as_term_list, changed to:
acpi_gbl_execute_tables_as_methods.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixing the ACPI_ERROR_NAMESPACE macros created an "unused variable"
compile error when ACPI_NO_ERROR_MESSAGES was defined. This commit
also fixes the above compilation errors by surrounding variables
meant for debugging inside a new ACPI_ERROR_ONLY macro.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Changes the option to ignore package resolution errors into
a runtime option.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As the documentatuon above its declaration indicates, acpi_get_object_info()
is intended for early probe usage and as such should not call any methods
which may rely on op_regions, before this commit it was also calling _STA,
which on some systems does rely on op_regions.
Calling _STA before things are ready leads to errors such as these
(under Linux, on some hardware):
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[generic_serial_bus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region generic_serial_bus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
End 2015 support for the _SUB method was removed for exactly the same
reason. Removing current_status from struct acpi_device_info only has a limited
impact. Within ACPICA it is only used by 2 debug messages, both
of which are modified to no longer print it with this commit.
Outside of ACPICA, there was one user in Linux, which has been patched to
no longer use current_status in Torvald's current master.
I've not checked if free_BSD or others are using the current_status field.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki