Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
We'd like to use xsave_state() earlier, but its SYSTEM_BOOTING check
is too imprecise.
The real condition that xsave_state() would like to check is whether
alternative XSAVE instructions were patched into the kernel image
already.
Add such a (read-mostly) debug flag and use it in xsave_state().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Take a look at the first instruction byte before optimizing the NOP -
there might be something else there already, like the ALTERNATIVE_2()
in rdtsc_barrier() which NOPs out on AMD even though we just
patched in an MFENCE.
This happens because the alternatives sees X86_FEATURE_MFENCE_RDTSC,
AMD CPUs set it, we patch in the MFENCE and right afterwards it sees
X86_FEATURE_LFENCE_RDTSC which AMD CPUs don't set and we blindly
optimize the NOP.
Checking whether at least the first byte is 0x90 prevents that.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1428181662-18020-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Quentin caught a corner case with the generation of instruction
padding in the ALTERNATIVE_2 macro: if len(orig_insn) <
len(alt1) < len(alt2), then not enough padding gets added and
that is not good(tm) as we could overwrite the beginning of the
next instruction.
Luckily, at the time of this writing, we don't have
ALTERNATIVE_2() invocations which have that problem and even if
we did, a simple fix would be to prepend the instructions with
enough prefixes so that that corner case doesn't happen.
However, best it would be if we fixed it properly. See below for
a simple, abstracted example of what we're doing.
So what we ended up doing is, we compute the
max(len(alt1), len(alt2)) - len(orig_insn)
and feed that value to the .skip gas directive. The max() cannot
have conditionals due to gas limitations, thus the fancy integer
math.
With this patch, all ALTERNATIVE_2 sites get padded correctly;
generating obscure test cases pass too:
#define alt_max_short(a, b) ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
#define gen_skip(orig, alt1, alt2, marker) \
.skip -((alt_max_short(alt1, alt2) - (orig)) > 0) * \
(alt_max_short(alt1, alt2) - (orig)),marker
.pushsection .text, "ax"
.globl main
main:
gen_skip(1, 2, 4, 0x09)
gen_skip(4, 1, 2, 0x10)
...
.popsection
Thanks to Quentin for catching it and double-checking the fix!
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150404133443.GE21152@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
user_mode_vm() and user_mode() are now the same. Change all callers
of user_mode_vm() to user_mode().
The next patch will remove the definition of user_mode_vm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/43b1f57f3df70df5a08b0925897c660725015554.1426728647.git.luto@kernel.org
[ Merged to a more recent kernel. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alternatives allow now for an empty old instruction. In this case we go
and pad the space with NOPs at assembly time. However, there are the
optimal, longer NOPs which should be used. Do that at patching time by
adding alt_instr.padlen-sized NOPs at the old instruction address.
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Up until now we had to pay attention to relative JMPs in alternatives
about how their relative offset gets computed so that the jump target
is still correct. Or, as it is the case for near CALLs (opcode e8), we
still have to go and readjust the offset at patching time.
What is more, the static_cpu_has_safe() facility had to forcefully
generate 5-byte JMPs since we couldn't rely on the compiler to generate
properly sized ones so we had to force the longest ones. Worse than
that, sometimes it would generate a replacement JMP which is longer than
the original one, thus overwriting the beginning of the next instruction
at patching time.
So, in order to alleviate all that and make using JMPs more
straight-forward we go and pad the original instruction in an
alternative block with NOPs at build time, should the replacement(s) be
longer. This way, alternatives users shouldn't pay special attention
so that original and replacement instruction sizes are fine but the
assembler would simply add padding where needed and not do anything
otherwise.
As a second aspect, we go and recompute JMPs at patching time so that we
can try to make 5-byte JMPs into two-byte ones if possible. If not, we
still have to recompute the offsets as the replacement JMP gets put far
away in the .altinstr_replacement section leading to a wrong offset if
copied verbatim.
For example, on a locally generated kernel image
old insn VA: 0xffffffff810014bd, CPU feat: X86_FEATURE_ALWAYS, size: 2
__switch_to:
ffffffff810014bd: eb 21 jmp ffffffff810014e0
repl insn: size: 5
ffffffff81d0b23c: e9 b1 62 2f ff jmpq ffffffff810014f2
gets corrected to a 2-byte JMP:
apply_alternatives: feat: 3*32+21, old: (ffffffff810014bd, len: 2), repl: (ffffffff81d0b23c, len: 5)
alt_insn: e9 b1 62 2f ff
recompute_jumps: next_rip: ffffffff81d0b241, tgt_rip: ffffffff810014f2, new_displ: 0x00000033, ret len: 2
converted to: eb 33 90 90 90
and a 5-byte JMP:
old insn VA: 0xffffffff81001516, CPU feat: X86_FEATURE_ALWAYS, size: 2
__switch_to:
ffffffff81001516: eb 30 jmp ffffffff81001548
repl insn: size: 5
ffffffff81d0b241: e9 10 63 2f ff jmpq ffffffff81001556
gets shortened into a two-byte one:
apply_alternatives: feat: 3*32+21, old: (ffffffff81001516, len: 2), repl: (ffffffff81d0b241, len: 5)
alt_insn: e9 10 63 2f ff
recompute_jumps: next_rip: ffffffff81d0b246, tgt_rip: ffffffff81001556, new_displ: 0x0000003e, ret len: 2
converted to: eb 3e 90 90 90
... and so on.
This leads to a net win of around
40ish replacements * 3 bytes savings =~ 120 bytes of I$
on an AMD guest which means some savings of precious instruction cache
bandwidth. The padding to the shorter 2-byte JMPs are single-byte NOPs
which on smart microarchitectures means discarding NOPs at decode time
and thus freeing up execution bandwidth.
Signed-off-by: Borislav Petkov <bp@suse.de>
Up until now we have always paid attention to make sure the length of
the new instruction replacing the old one is at least less or equal to
the length of the old instruction. If the new instruction is longer, at
the time it replaces the old instruction it will overwrite the beginning
of the next instruction in the kernel image and cause your pants to
catch fire.
So instead of having to pay attention, teach the alternatives framework
to pad shorter old instructions with NOPs at buildtime - but only in the
case when
len(old instruction(s)) < len(new instruction(s))
and add nothing in the >= case. (In that case we do add_nops() when
patching).
This way the alternatives user shouldn't have to care about instruction
sizes and simply use the macros.
Add asm ALTERNATIVE* flavor macros too, while at it.
Also, we need to save the pad length in a separate struct alt_instr
member for NOP optimization and the way to do that reliably is to carry
the pad length instead of trying to detect whether we're looking at
single-byte NOPs or at pathological instruction offsets like e9 90 90 90
90, for example, which is a valid instruction.
Thanks to Michael Matz for the great help with toolchain questions.
Signed-off-by: Borislav Petkov <bp@suse.de>
Make it pass __func__ implicitly. Also, dump info about each replacing
we're doing. Fixup comments and style while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Allow kprobes on text_poke/hw_breakpoint because
those are not related to the critical int3-debug
recursive path of kprobes at this moment.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/20140417081807.26341.73219.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In fd4363fff3 ("x86: Introduce int3 (breakpoint)-based
instruction patching"), the mechanism that was introduced for
notifying alternatives code from int3 exception handler that and
exception occured was die_notifier.
This is however problematic, as early code might be using jump
labels even before the notifier registration has been performed,
which will then lead to an oops due to unhandled exception. One
of such occurences has been encountered by Fengguang:
int3: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc1-01429-g04bf576 #8
task: ffff88000da1b040 ti: ffff88000da1c000 task.ti: ffff88000da1c000
RIP: 0010:[<ffffffff811098cc>] [<ffffffff811098cc>] ttwu_do_wakeup+0x28/0x225
RSP: 0000:ffff88000dd03f10 EFLAGS: 00000006
RAX: 0000000000000000 RBX: ffff88000dd12940 RCX: ffffffff81769c40
RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88000dd03f28 R08: ffffffff8176a8c0 R09: 0000000000000002
R10: ffffffff810ff484 R11: ffff88000dd129e8 R12: ffff88000dbc90c0
R13: ffff88000dbc90c0 R14: ffff88000da1dfd8 R15: ffff88000da1dfd8
FS: 0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000ffffffff CR3: 0000000001c88000 CR4: 00000000000006e0
Stack:
ffff88000dd12940 ffff88000dbc90c0 ffff88000da1dfd8 ffff88000dd03f48
ffffffff81109e2b ffff88000dd12940 0000000000000000 ffff88000dd03f68
ffffffff81109e9e 0000000000000000 0000000000012940 ffff88000dd03f98
Call Trace:
<IRQ>
[<ffffffff81109e2b>] ttwu_do_activate.constprop.56+0x6d/0x79
[<ffffffff81109e9e>] sched_ttwu_pending+0x67/0x84
[<ffffffff8110c845>] scheduler_ipi+0x15a/0x2b0
[<ffffffff8104dfb4>] smp_reschedule_interrupt+0x38/0x41
[<ffffffff8173bf5d>] reschedule_interrupt+0x6d/0x80
<EOI>
[<ffffffff810ff484>] ? __atomic_notifier_call_chain+0x5/0xc1
[<ffffffff8105cc30>] ? native_safe_halt+0xd/0x16
[<ffffffff81015f10>] default_idle+0x147/0x282
[<ffffffff81017026>] arch_cpu_idle+0x3d/0x5d
[<ffffffff81127d6a>] cpu_idle_loop+0x46d/0x5db
[<ffffffff81127f5c>] cpu_startup_entry+0x84/0x84
[<ffffffff8104f4f8>] start_secondary+0x3c8/0x3d5
[...]
Fix this by directly calling poke_int3_handler() from the int3
exception handler (analogically to what ftrace has been doing
already), instead of relying on notifier, registration of which
might not have yet been finalized by the time of the first trap.
Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307231007490.14024@pobox.suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since introducing the text_poke_bp() for all text_poke_smp*()
callers, text_poke_smp*() are now unused. This patch basically
reverts:
3d55cc8a05 ("x86: Add text_poke_smp for SMP cross modifying code")
7deb18dcf0 ("x86: Introduce text_poke_smp_batch() for batch-code modifying")
and related commits.
This patch also fixes a Kconfig dependency issue on STOP_MACHINE
in the case of CONFIG_SMP && !CONFIG_MODULE_UNLOAD.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114753.26675.18714.stgit@mhiramat-M0-7522
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce a method for run-time instruction patching on a live SMP kernel
based on int3 breakpoint, completely avoiding the need for stop_machine().
The way this is achieved:
- add a int3 trap to the address that will be patched
- sync cores
- update all but the first byte of the patched range
- sync cores
- replace the first byte (int3) by the first byte of
replacing opcode
- sync cores
According to
http://lkml.indiana.edu/hypermail/linux/kernel/1001.1/01530.html
synchronization after replacing "all but first" instructions should not
be necessary (on Intel hardware), as the syncing after the subsequent
patching of the first byte provides enough safety.
But there's not only Intel HW out there, and we'd rather be on a safe
side.
If any CPU instruction execution would collide with the patching,
it'd be trapped by the int3 breakpoint and redirected to the provided
"handler" (which would typically mean just skipping over the patched
region, acting as "nop" has been there, in case we are doing nop -> jump
and jump -> nop transitions).
Ftrace has been using this very technique since 08d636b ("ftrace/x86:
Have arch x86_64 use breakpoints instead of stop machine") for ages
already, and jump labels are another obvious potential user of this.
Based on activities of Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
a few years ago.
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307121102440.29788@pobox.suse.cz
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We add another 32-bit vector at the end of the ->x86_capability
bitvector which collects bugs present in CPUs. After all, a CPU bug is a
kind of a capability, albeit a strange one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Pull x86/asm changes from Ingo Molnar:
"The one change that stands out is the alternatives patching change
that prevents us from ever patching back instructions from SMP to UP:
this simplifies things and speeds up CPU hotplug.
Other than that it's smaller fixes, cleanups and improvements."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Unspaghettize do_trap()
x86_64: Work around old GAS bug
x86: Use REP BSF unconditionally
x86: Prefer TZCNT over BFS
x86/64: Adjust types of temporaries used by ffs()/fls()/fls64()
x86: Drop unnecessary kernel_eflags variable on 64-bit
x86/smp: Don't ever patch back to UP if we unplug cpus
We still patch SMP instructions to UP variants if we boot with a
single CPU, but not at any other time. In particular, not if we
unplug CPUs to return to a single cpu.
Paul McKenney points out:
mean offline overhead is 6251/48=130.2 milliseconds.
If I remove the alternatives_smp_switch() from the offline
path [...] the mean offline overhead is 550/42=13.1 milliseconds
Basically, we're never going to get those 120ms back, and the
code is pretty messy.
We get rid of:
1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the
documentation is wrong. It's now the default.
2) The skip_smp_alternatives flag used by suspend.
3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end()
which were only used to set this one flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paul.mckenney@us.ibm.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.au
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Probably a leftover from the early days of self-patching, p6nops
are marked __initconst_or_module, which causes them to be
discarded in a non-modular kernel. If something later triggers
patching, it will overwrite kernel code with garbage.
Reported-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Intel case falls through into the generic case which then changes
the values. For cases like the P6 it doesn't do the right thing so
this seems to be a screwup.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Pull debug-for-linus git tree from Ingo Molnar.
Fix up trivial conflict in arch/x86/kernel/cpu/perf_event_intel.c due to
a printk() having changed to a pr_info() differently in the two branches.
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Move call to print_modules() out of show_regs()
x86/mm: Mark free_initrd_mem() as __init
x86/microcode: Mark microcode_id[] as __initconst
x86/nmi: Clean up register_nmi_handler() usage
x86: Save cr2 in NMI in case NMIs take a page fault (for i386)
x86: Remove cmpxchg from i386 NMI nesting code
x86: Save cr2 in NMI in case NMIs take a page fault
x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
stop_machine_text_poke() uses atomic_dec_and_test() to select one of
the CPUs executing that function to actually modify the code.
Since the variable is initialized to 1, subsequent CPUs will make the
variable go negative. Since going negative is uncommon/unexpected in
typical dec_and_test usage change this user to atomic_xchg().
This was found using a patch that warns on dec_and_test going
negative.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[ Rewrote changelog ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87zk8fgsx9.fsf@devron.myhome.or.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a more current logging style:
- Bare printks should have a KERN_<LEVEL> for consistency's sake
- Add pr_fmt where appropriate
- Neaten some macro definitions
- Convert some Ok output to OK
- Use "%s: ", __func__ in pr_fmt for summit
- Convert some printks to pr_<level>
Message output is not identical in all cases.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It appears that stop_machine_text_poke() wants to be called on all CPUs,
like it's done from text_poke_smp(). Fix text_poke_smp_batch() to do
this.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/1319702072-32676-1-git-send-email-rabin@rab.in
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cpu: Fix detection of Celeron Covington stepping A1 and B0
Documentation, ABI: Update L3 cache index disable text
x86, AMD, cacheinfo: Fix L3 cache index disable checks
x86, AMD, cacheinfo: Fix fallout caused by max3 conversion
x86, cpu: Change NOP selection for certain Intel CPUs
x86, cpu: Clean up and unify the NOP selection infrastructure
x86, percpu: Use ASM_NOP4 instead of hardcoding P6_NOP4
x86, cpu: Move AMD Elan Kconfig under "Processor family"
Fix up trivial conflicts in alternative handling (commit dc326fca2b
"x86, cpu: Clean up and unify the NOP selection infrastructure" removed
some hacky 5-byte instruction stuff, while commit d430d3d7e6 "jump
label: Introduce static_branch() interface" renamed HAVE_JUMP_LABEL to
CONFIG_JUMP_LABEL in the code that went away)
Some string operation functions may be patched twice, e.g. on enhanced REP MOVSB
/STOSB processors, memcpy is patched first by fast string alternative function,
then it is patched by enhanced REP MOVSB/STOSB alternative function.
Add comment for applying alternatives order to warn people who may change the
applying alternatives order for any reason.
[ Documentation-only patch ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-4-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Due to a decoder implementation quirk, some specific Intel CPUs
actually perform better with the "k8_nops" than with the
SDM-recommended NOPs. For runtime-selected NOPs, if we detect those
specific CPUs then use the k8_nops instead of the ones we would
normally use.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/1303166160-10315-4-git-send-email-hpa@linux.intel.com
Clean up and unify the NOP selection infrastructure:
- Make the atomic 5-byte NOP a part of the selection system.
- Pick NOPs once during early boot and then be done with it.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/1303166160-10315-3-git-send-email-hpa@linux.intel.com
Introduce:
static __always_inline bool static_branch(struct jump_label_key *key);
instead of the old JUMP_LABEL(key, label) macro.
In this way, jump labels become really easy to use:
Define:
struct jump_label_key jump_key;
Can be used as:
if (static_branch(&jump_key))
do unlikely code
enable/disale via:
jump_label_inc(&jump_key);
jump_label_dec(&jump_key);
that's it!
For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.
Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.
Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.
Testing:
I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.
jump label configured in
avg: 815.6
jump label *not* configured in (using atomic reads)
avg: 800.1
jump label *not* configured in (regular reads)
avg: 803.4
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Suggested-by: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
They were generated by 'codespell' and then manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Intel Archiecture Software Developer's Manual section 7.1.3 specifies that a
core serializing instruction such as "cpuid" should be executed on _each_ core
before the new instruction is made visible.
Failure to do so can lead to unspecified behavior (Intel XMC erratas include
General Protection Fault in the list), so we should avoid this at all cost.
This problem can affect modified code executed by interrupt handlers after
interrupt are re-enabled at the end of stop_machine, because no core serializing
instruction is executed between the code modification and the moment interrupts
are reenabled.
Because stop_machine_text_poke performs the text modification from the first CPU
decrementing stop_machine_first, modified code executed in thread context is
also affected by this problem. To explain why, we have to split the CPUs in two
categories: the CPU that initiates the text modification (calls text_poke_smp)
and all the others. The scheduler, executed on all other CPUs after
stop_machine, issues an "iret" core serializing instruction, and therefore
handles core serialization for all these CPUs. However, the text modification
initiator can continue its execution on the same thread and access the modified
text without any scheduler call. Given that the CPU that initiates the code
modification is not guaranteed to be the one actually performing the code
modification, it falls into the XMC errata.
Q: Isn't this executed from an IPI handler, which will return with IRET (a
serializing instruction) anyway?
A: No, now stop_machine uses per-cpu workqueue, so that handler will be
executed from worker threads. There is no iret anymore.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20110303160137.GB1590@Krystal>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: <stable@kernel.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-64, asm: Use fxsaveq/fxrestorq in more places
* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hwmon: Add core threshold notification to therm_throt.c
* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, paravirt: Use native_halt on a halt, not native_safe_halt
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
locking, lockdep: Convert sprintf_symbol to %pS
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
irq: Better struct irqaction layout
During suspend, we disable all the non boot cpus. And during resume we bring
them all back again. So no need to do alternatives_smp_switch() in between.
On my core 2 based laptop, this speeds up the suspend path by 15msec and the
resume path by 5 msec (suspend/resume speed up differences can be attributed
to the different P-states that the cpu is in during suspend/resume).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1290557500.4946.8.camel@sbsiddha-MOBL3.sc.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Introduce text_poke_smp_batch(). This function modifies several
text areas with one stop_machine() on SMP. Because calling
stop_machine() is heavy task, it is better to aggregate
text_poke requests.
( Note: I've talked with Rusty about this interface, and
he would not like to expand stop_machine() interface, since
it is not for generic use. )
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095422.2961.51217.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
jump label: Add work around to i386 gcc asm goto bug
x86, ftrace: Use safe noops, drop trap test
jump_label: Fix unaligned traps on sparc.
jump label: Make arch_jump_label_text_poke_early() optional
jump label: Fix error with preempt disable holding mutex
oprofile: Remove deprecated use of flush_scheduled_work()
oprofile: Fix the hang while taking the cpu offline
jump label: Fix deadlock b/w jump_label_mutex vs. text_mutex
jump label: Fix module __init section race
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Check irq_remapped instead of remapping_enabled in destroy_irq()
Currently, text_poke_smp() passes a NULL as the third argument to
__stop_machine(), which will only run stop_machine_text_poke()
on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke()
is intended to be run on all cpus.
I actually didn't notice any problems with stop_machine_text_poke()
only being called on 1 cpu, but found this via code inspection.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20101028152026.GB2875@redhat.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Always use a safe 5-byte noop sequence. Drop the trap test, since it
is known to return false negatives on some virtualization platforms on
32 bits. The resulting code is both simpler and safer.
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use __stop_machine() in text_poke_smp() because the caller
must get online_cpus before calling text_poke_smp(), but
stop_machine() do it again. We don't need it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101014031036.4100.83989.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
base patch to implement 'jump labeling'. Based on a new 'asm goto' inline
assembly gcc mechanism, we can now branch to labels from an 'asm goto'
statment. This allows us to create a 'no-op' fastpath, which can subsequently
be patched with a jump to the slowpath code. This is useful for code which
might be rarely used, but which we'd like to be able to call, if needed.
Tracepoints are the current usecase that these are being implemented for.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <ee8b3595967989fdaf84e698dc7447d315ce972a.1284733808.git.jbaron@redhat.com>
[ cleaned up some formating ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Make text_poke_early available outside of alternative.c. The jump label
patchset wants to make use of it in order to set up the optimal no-op
sequences at run-time.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <04cfddf2ba77bcabfc3e524f1849d871d6a1cf9d.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move Steve's code for finding the best 5-byte no-op from ftrace.c to
alternative.c. The idea is that other consumers (in this case jump label)
want to make use of that code.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <96259ae74172dcac99c0020c249743c523a92e18.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Make the alternatives-patching code BUG on encountering an invalid CPU
feature number. Should have done this a long time ago.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Yinghai Lu <yinhai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <tip-df378ccfc4dd04e263426ad805516915874774aa@git.kernel.org>
Merge reason:
Conflict between LOCK_PREFIX_HERE and relative alternatives
pointers
Resolved Conflicts:
arch/x86/include/asm/alternative.h
arch/x86/kernel/alternative.c
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Linus Torvalds