Commit Graph

78473 Commits

Author SHA1 Message Date
Dave Airlie 946ca97e2e Merge tag 'drm-intel-fixes-2021-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15 final:
- Remove unconditional clflushes
- Fix oops on boot due to sync state on disabled DP encoders
- Revert backend specific data added to tracepoints
- Remove useless and incorrect memory frequence calculation

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8735olh27y.fsf@intel.com
2021-10-29 04:46:14 +10:00
Joonas Lahtinen 9a4aa3a2f1 drm/i915: Revert 'guc_id' from i915_request tracepoint
Avoid adding backend specific data to the tracepoints outside of
the LOW_LEVEL_TRACEPOINTS kernel config protection. These bits of
information are bound to change depending on the selected submission
method per platform and are not necessarily possible to maintain in
the future.

Fixes: dbf9da8d55 ("drm/i915/guc: Add trace point for GuC submit")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027093255.66489-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 64512a66b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2021-10-28 11:45:11 +03:00
Dave Airlie 79516af349 One patch to fix the default screen orientation on the GPD Win3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYXpPlAAKCRDj7w1vZxhR
 xa+hAP9ZGHz0xtN5HPaDqAnN0rpJ8U6pC5+tMi4S+wKhdmpaLQD/YmCFCeo6uI6E
 6usQpLmaiktboWbd8vv5qk67pq0keQM=
 =LNT9
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2021-10-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

One patch to fix the default screen orientation on the GPD Win3

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028072300.b4gqexq6zfhby24g@gilmour
2021-10-28 17:27:14 +10:00
Dave Airlie 19928833e8 drm-misc-fixes for v5.15-rc8:
- Fix fence leak in ttm_transfered_destroy.
 - Add quirk for Aya Neo 2021
 - Reset property count for each drm damage selftest so full run will work correctly.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmF38aEACgkQ/lWMcqZw
 E8NWsBAAimK8w9+v69npTkB5Mu0VI0c57svkV5N8OArDuqLYrqhTEAWnbxoit18O
 qPMo0FCdTA7cL5m9YdCK7bKFBC2yFBH5W2exS07srHtcz+kGtIGuWKFL2RmIH4Lk
 KJ1/JSI75vDOCZUZoOlTKUupuEDtiPu3YZtZZ/+b+6FYZm78QVlSvNqjht7YLniG
 eTx0sPqDKq/cK7ibCfDwfMtdx2u+QkOgLjqjUn1C60iioch9T7usE2Uz2lyCDjcO
 K8UptZ/EyepooO9V1/zC8VaMlSjWt5J5mWIqxu1j6i0OqWgQpHFqyECgcpKJqHUQ
 aOjaGSAahp0Q9xzhaP9DW++o8O0CW21nsoKUG6kdl2Sjlu7XZX22jJ8HWoYGSuwm
 B7y/SkxCfPst9GbQwm8eby2F6uQQR+V4Uob4mGq7fcPw7i07nNWHJmMNOluA3sMw
 VYPqz3JB384Lsd0rEmHVOrRXEJHkGcQilteXJCPKStMMFidtlJgtYJ+uicjULsEb
 KCaYAH/g5Y1m0cke1wPhYtOAFN8UYFlhrFtzOV5T+gNCT1E0H5Q6hM+wDDSNBn6o
 DcNJ7PrSZmeAicg/GEmRvVL/OqioFrA2eV28DycV8nIBCgNvT/Kj37DClDSvLOT2
 65t2pu9hCrD+hRBKaatNGtptT8HjCVu6VHrCYAJu6Pi5ys51sOI=
 =hrvf
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2021-10-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v5.15-rc8:
- Fix fence leak in ttm_transfered_destroy.
- Add quirk for Aya Neo 2021
- Reset property count for each drm damage selftest so full run will work correctly.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a133970-ff4b-aa62-d346-b269b1b9236e@linux.intel.com
2021-10-28 15:22:20 +10:00
Nicholas Kazlauskas ad76744b04 drm/amd/display: Fix deadlock when falling back to v2 from v3
[Why]
A deadlock in the kernel occurs when we fallback from the V3 to V2
add_topology_to_display or remove_topology_to_display because they
both try to acquire the dtm_mutex but recursive locking isn't
supported on mutex_lock().

[How]
Make the mutex_lock/unlock more fine grained and move them up such that
they're only required for the psp invocation itself.

Fixes: bf62221e9d ("drm/amd/display: Add DCN3.1 HDCP support")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-27 22:04:50 -04:00
Michael Strauss 54149d13f3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
[WHY]
On certain configs, SMU clock table voltages don't match which cause parser
to behave incorrectly by leaving dcfclk and socclk table entries unpopulated.

[HOW]
Currently the function that finds the corresponding clock for a given voltage
only checks for exact voltage level matches. In the case that no match gets
found, parser now falls back to searching for the max clock which meets the
requested voltage (i.e. its corresponding voltage is below requested).

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-27 22:04:32 -04:00
Patrik Jakobsson 3f4e54bd31 drm/amdgpu: Fix even more out of bound writes from debugfs
CVE-2021-42327 was fixed by:

commit f23750b5b3
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date:   Wed Oct 13 16:04:13 2021 -0400

    drm/amdgpu: fix out of bounds write

but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.

v2:
	* Add missing fix in dp_max_bpc_write (Harry Wentland)

Fixes: 918698d5c2 ("drm/amd/display: Return the number of bytes parsed than allocated")
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-27 22:02:28 -04:00
Dave Airlie defbbcd99f Merge tag 'amd-drm-fixes-5.15-2021-10-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.15-2021-10-21:

amdgpu:
- Fix a potential out of bounds write in debugfs
- Fix revision handling for Yellow Carp
- Display fixes for Yellow Carp

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021203430.4578-1-alexander.deucher@amd.com
2021-10-27 10:01:21 +10:00
Mario 61b1d445f3 drm: panel-orientation-quirks: Add quirk for GPD Win3
Fixes screen orientation for GPD Win 3 handheld gaming console.

Signed-off-by: Mario Risoldi <awxkrnl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026112737.9181-1-awxkrnl@gmail.com
2021-10-26 20:57:10 +02:00
Imre Deak 6e6f966308 drm/i915/dp: Skip the HW readout of DPCD on disabled encoders
Reading out the DP encoders' DPCD during booting or resume is only
required for enabled encoders: such encoders may be modesetted during
the initial commit and the link training this involves depends on an
initialized DPCD. For DDI encoders reading out the DPCD is skipped, do
the same on pre-DDI platforms.

Atm, the first DPCD readout without a sink connected - which is a likely
scneario if the encoder is disabled - leaves intel_dp->num_common_rates
at 0, which resulted in

intel_dp_sync_state()->intel_dp_max_common_rate()

in a

intel_dp->common_rates[-1]

access. This by definition results in an undefined behaviour, though to
my best knowledge in all HW/compiler configurations it actually results
in accessing the array item type value preceding the array. In this
case the preceding value happens to be intel_dp->num_common_rates,
which is 0, so this issue - by luck - didn't cause a user visible
problem.

Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN
builds leads to a kernel BUG() (which revealed this problem for us),
hence CC:stable.

A related problem in case the encoder is enabled but the sink is not
connected or the DPCD readout fails is fixed by the next patch.

v2: Amend the commit message describing the root cause of the
    CONFIG_UBSAN BUG().

Fixes: a532cde31d ("drm/i915/tc: Fix TypeC port init/resume time sanitization")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Reported-and-tested-by: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-2-imre.deak@intel.com
(cherry picked from commit 4ec5ffc341)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26 10:40:10 +03:00
Ville Syrjälä 9761ffb8f1 drm/i915: Catch yet another unconditioal clflush
Replace the unconditional clflush() with drm_clflush_virt_range()
which does the wbinvd() fallback when clflush is not available.

This time no justification is given for the clflush in the
offending commit.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2c8ab3339e ("drm/i915: Pin timeline map after first timeline pin, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 9ced12182d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26 10:40:09 +03:00
Ville Syrjälä fcf918ffd3 drm/i915: Convert unconditional clflush to drm_clflush_virt_range()
This one is apparently a "clflush for good measure", so bit more
justification (if you can call it that) than some of the others.
Convert to drm_clflush_virt_range() again so that machines without
clflush will survive the ordeal.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Fixes: 12ca695d2c ("drm/i915: Do not share hwsp across contexts any more, v8.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit af7b6d234e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26 10:40:09 +03:00
Daniel Vetter ee71fb6c4d drm/i915/selftests: Properly reset mock object propers for each test
I forgot to do this properly in

commit 6f11f37459
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jul 23 10:34:55 2021 +0200

    drm/plane: remove drm_helper_get_plane_damage_clips

intel-gfx CI didn't spot this because we run each selftest in each own
invocations, which means reloading i915.ko. But if you just run all
the selftests in one go at boot-up, then it falls apart and eventually
we cross over the hardcoded limited of how many properties can be
attached to a single object.

Fix this by resetting the property count. Nothing else to clean up
since it's all static storage anyway.

Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 6f11f37459 ("drm/plane: remove drm_helper_get_plane_damage_clips")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021202048.2638668-1-daniel.vetter@ffwll.ch
2021-10-22 11:09:45 +02:00
Kim Phillips 595cb5e0b8 Revert "drm/ast: Add detect function support"
This reverts commit aae74ff9ca,
since it prevents my AMD Milan system from booting, with:

[   27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000
[   27.197506] #PF: supervisor write access in kernel mode
[   27.203333] #PF: error_code(0x0002) - not-present page
[   27.209064] PGD 0 P4D 0
[   27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15
[   27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021
[   27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0
[   27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c
[   27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086
[   27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101
[   27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001
[   27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb
[   27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8
[   27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350
[   27.304961] FS:  0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000
[   27.313988] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0
[   27.328346] PKRU: 55555554
[   27.331359] Call Trace:
[   27.334073]  <IRQ>
[   27.336314]  ? __queue_work+0x420/0x420
[   27.340589]  ? lapic_next_event+0x21/0x30
[   27.345060]  ? clockevents_program_event+0x8f/0xe0
[   27.350402]  __do_softirq+0xfb/0x2db
[   27.354388]  irq_exit_rcu+0x98/0xd0
[   27.358275]  sysvec_apic_timer_interrupt+0xac/0xd0
[   27.363620]  </IRQ>
[   27.365955]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390
[   27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d
[   27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246
[   27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f
[   27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81
[   27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200
[   27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000
[   27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001
[   27.443854]  ? cpuidle_enter_state+0xbb/0x390
[   27.448712]  cpuidle_enter+0x2e/0x40
[   27.452695]  call_cpuidle+0x23/0x40
[   27.456584]  do_idle+0x1f0/0x270
[   27.460181]  cpu_startup_entry+0x20/0x30
[   27.464553]  rest_init+0xd4/0xe0
[   27.468149]  arch_call_rest_init+0xe/0x1b
[   27.472619]  start_kernel+0x6bc/0x6e2
[   27.476764]  x86_64_start_reservations+0x24/0x26
[   27.481912]  x86_64_start_kernel+0x75/0x79
[   27.486477]  secondary_startup_64_no_verify+0xb0/0xbb
[   27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi
[   27.551789] CR2: 0000000000000000
[   27.555482] ---[ end trace 897987dfe93dccc6 ]---
[   27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0
[   27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c
[   27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086
[   27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101
[   27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001
[   27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb
[   27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8
[   27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350
[   27.632624] FS:  0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000
[   27.641650] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0
[   27.656119] PKRU: 55555554
[   27.659133] Kernel panic - not syncing: Fatal exception in interrupt
[   29.030411] Shutting down cpus with NMI
[   29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[   29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Since unreliable, found by bisecting for KASAN's use-after-free in
enqueue_timer+0x4f/0x1e0, where the timer callback is called.

Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Fixes: aae74ff9ca ("drm/ast: Add detect function support")
Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/
Cc: Ainux <ainux.wang@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: sterlingteng@gmail.com
Cc: chenhuacai@kernel.org
Cc: Chuck Lever III <chuck.lever@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
2021-10-22 05:52:12 +10:00
Dave Airlie 7e1c5440f4 drm-misc-fixes for v5.15-rc7:
- Rebased, to remove vc4 patches.
 - Fix mxsfb crash on unload.
 - Use correct sync parameters for Feixin K101-IM2BYL02.
 - Assorted kmb modeset/atomic fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmFxM6YACgkQ/lWMcqZw
 E8MDpRAAki0KQpdlg00AglHfomXg40A6fzCMha5eFWxG1inPav11+Rquxu/E1q1q
 z3dt6MsHMxoj+rV9vedpRJKcj1HP0GYIgzXJGLKbA0he5Ie4XCAKMj8KixpcKnIJ
 GG3giX+ownnHcKOKcV6AvF/wiXoIGaIYCSwllEBZ01bW92rVBIPVkvadbcpCCtR+
 rqm4tz6vcRV23M5XqBhzDjaB9IZ+5Xjvyw8CNF2yuoFbPprSML0WVF6NZuF/me8W
 L3d8P6CVXUzvIJzRN8LogpyYUtcWjx1jgLAt6urU9xCh/kVl08NB0w8Aw2ZIJS3l
 xI+G2P549TTAg6JK5WGIEUiaNNMjtsO17BEk+PjXwQrtaIemkiPKwLZn0zaZuEsR
 5HCV0vRkzMeoYKOD5epZKLRw15nUDMu1I8a/O9Lkxe6u0FNRu8sQ3bO4TwfYSDLv
 742YL7UcYVFQq805NBPIeV2WI5W5ROSk8MVQAAyOHQRKTUpJd+cbXJsUFCvAeZ0o
 EFk3R4CoV6ZoJMDLuq08S4nvDut1TyIF6QJpUWKt5X/kcguz4y0ymoJT2FhDeODf
 fgIulBc5e8Qa12afbKY2u1OCoFFnQZIwL3tv3PfVXLzGNIO1MeY2la0Is3saMPuy
 +kAlLDtk0YpVMsLTcmv+5nlehdB554ob72/4y9s0ppOMso1CbYg=
 =dKM5
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2021-10-21-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v5.15-rc7:
- Rebased, to remove vc4 patches.
- Fix mxsfb crash on unload.
- Use correct sync parameters for Feixin K101-IM2BYL02.
- Assorted kmb modeset/atomic fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com
2021-10-22 05:35:28 +10:00
Dave Airlie 730b64d827 Merge tag 'drm-msm-fixes-2021-10-18' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
One more fix for v5.15, to work around a power stability issue on a630
(and possibly others)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com
2021-10-22 05:22:15 +10:00
Bryant Mairs def0c36972 drm: panel-orientation-quirks: Add quirk for Aya Neo 2021
Fixes screen orientation for the Aya Neo 2021 handheld gaming console.

Signed-off-by: Bryant Mairs <bryant@mai.rs>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019142433.4295-1-bryant@mai.rs
2021-10-21 19:33:23 +02:00
Christian König 0db55f9a1b drm/ttm: fix memleak in ttm_transfered_destroy
We need to cleanup the fences for ghost objects as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214029
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214447
CC: <stable@vger.kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020173211.2247-1-christian.koenig@amd.com
2021-10-21 15:27:21 +02:00
Anitha Chrisanthus 74056092ff drm/kmb: Enable ADV bridge after modeset
On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.

v2: changed to atomic_bridge_chain_enable (Sam)

Fixes: 98521f4d4b ("drm/kmb: Mipi DSI part of the display driver")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:09 +02:00
Anitha Chrisanthus 004d271980 drm/kmb: Corrected typo in handle_lcd_irq
Check for Overflow bits for layer3 in the irq handler.

Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:09 +02:00
Edmund Dea 982f8ad666 drm/kmb: Disable change of plane parameters
Due to HW limitations, KMB cannot change height, width, or
pixel format after initial plane configuration.

v2: removed memset disp_cfg as it is already zero.

Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00
Edmund Dea 13047a092c drm/kmb: Remove clearing DPHY regs
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during
DSI initialization since this was causing MIPI Rx reset. Rest of the
writes are bitwise, so will not affect Mipi Rx side.

Fixes: 98521f4d4b ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00
Anitha Chrisanthus a79f40cccd drm/kmb: Limit supported mode to 1080p
KMB only supports single resolution(1080p), this commit checks for
1920x1080x60 or 1920x1080x59 in crtc_mode_valid.
Also, modes with vfp < 4 are not supported in KMB display. This change
prunes display modes with vfp < 4.

v2: added vfp check

Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00
Anitha Chrisanthus 3e4c31e8f7 drm/kmb: Work around for higher system clock
Use a different value for system clock offset in the
ppl/llp ratio calculations for clocks higher than 500 Mhz.

Fixes: 98521f4d4b ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00
Dan Johansen 772970620a drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel
This adjusts sync values according to the datasheet

Fixes: 1c243751c0 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel")
Co-developed-by: Marius Gripsgard <marius@ubports.com>
Signed-off-by: Dan Johansen <strit@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00
Marek Vasut 3cfc183052 drm: mxsfb: Fix NULL pointer dereference crash on unload
The mxsfb->crtc.funcs may already be NULL when unloading the driver,
in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from
mxsfb_unload() leads to NULL pointer dereference.

Since all we care about is masking the IRQ and mxsfb->base is still
valid, just use that to clear and mask the IRQ.

Fixes: ae1ed00932 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00
Aaron Liu 53c2ff8bcb drm/amdgpu: support B0&B1 external revision id for yellow carp
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.

v2: squash in fix for display code (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:27:31 -04:00
Jake Wang 2ef8ea2394 drm/amd/display: Moved dccg init to after bios golden init
[Why]
bios_golden_init will override dccg_init during init_hw.

[How]
Move dccg_init to after bios_golden_init.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:26:58 -04:00
Nikola Cornij dd8cb18906 drm/amd/display: Increase watermark latencies for DCN3.1
[why]
The original latencies were causing underflow in some modes

[how]
Replace with the up-to-date watermark values based on new measurments

Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:26:53 -04:00
Eric Yang 4835ea6c17 drm/amd/display: increase Z9 latency to workaround underflow in Z9
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:26:47 -04:00
Nicholas Kazlauskas 672437486e drm/amd/display: Require immediate flip support for DCN3.1 planes
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.

If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.

[How]
DM always requires support so always require it as part of DML input
parameters.

This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:26:42 -04:00
Nicholas Kazlauskas c938aed88f drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.

[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:17:13 -04:00
Nikola Cornij c21b105380 drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1
[why]
The requirement is that image width up to 4096 shall be supported

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:14:39 -04:00
Thelford Williams 5afa7898ab drm/amdgpu: fix out of bounds write
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.

Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-10-20 15:13:50 -04:00
José Roberto de Souza 59be177a90 drm/i915: Remove memory frequency calculation
This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.

Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.

So here dropping it as whole.

v2:
- Also remove memory frequency calculation for gen9 LP platforms

Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9 ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com
(cherry picked from commit 83f52364b1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-19 10:45:52 +03:00
Rob Clark 5ca6779d2f drm/msm/devfreq: Restrict idle clamping to a618 for now
Until we better understand the stability issues caused by frequent
frequency changes, lets limit them to a618.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-18 14:31:57 -07:00
Vegard Nossum a14bc107ed drm/panel: olimex-lcd-olinuxino: select CRC32
Fix the following build/link error by adding a dependency on the CRC32
routines:

  ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe':
  panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le'

Fixes: 17fd7a9d32 ("drm/panel: Add support for Olimex LCD-OLinuXino panel")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:05:13 +10:00
Randy Dunlap 1a361b41c1 drm/r128: fix build for UML
Fix a build error on CONFIG_UML, which does not support (provide)
wbinvd(). UML can use the generic mb() instead.

../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’:
../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration]
  wbinvd();
  ^~~~~~

Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:05:10 +10:00
Marek Vasut d1d94b0129 drm/nouveau/fifo: Reinstate the correct engine bit programming
Commit 64f7c698be ("drm/nouveau/fifo: add engine_id hook") replaced
fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of
fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned
from the later g84_fifo_engine_id() are incremented by 1 compared to
the previous g84_fifo_chan_engine() return values.

This is fine either way for most of the code, except this one line
where an engine bit programmed into the hardware is derived from the
return value. Decrement the return value accordingly, otherwise the
wrong engine bit is programmed into the hardware and that leads to
the following failure:
nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420

On the following hardware:
lspci -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)
lspci -ns 01:00.0
01:00.0 0300: 10de:0a3c (rev a2)

Fixes: 64f7c698be ("drm/nouveau/fifo: add engine_id hook")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 5.12+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:04:58 +10:00
Dexuan Cui b253c3026c drm/hyperv: Fix double mouse pointers
Hyper-V supports a hardware cursor feature. It is not used by Linux VM,
but the Hyper-V host still draws a point as an extra mouse pointer,
which is unwanted, especially when Xorg is running.

The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer.
When the hyperv_drm driver was developed, the function synthvid_send_ptr()
was not copied from the hyperv_fb driver. Fix the issue by adding the
function into hyperv_drm.

Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:04:44 +10:00
Thomas Zimmermann b693e42921 drm/fbdev: Clamp fbdev surface size if too large
Clamp the fbdev surface size of the available maximumi height to avoid
failing to init console emulation. An example error is shown below.

  bad framebuffer height 2304, should be >= 768 && <= 768
  [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
  simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)

This is especially a problem with drivers that have very small screen
sizes and cannot over-allocate at all.

v2:
	* reduce warning level (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Amanoel Dawod <kernel@amanoeldawod.com>
Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:04:05 +10:00
Douglas Anderson 97794170b6 drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read
In commit e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.

Let's fix this by adding a bounds check.

This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`.

Fixes: e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid corruption test")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:03:57 +10:00
Dave Airlie 6011106d12 Mediatek DRM Fixes for Linux 5.15
1. Revert series "CMDQ refinement of Mediatek DRM driver"
 -----BEGIN PGP SIGNATURE-----
 
 iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAmFnbjIYHGNodW5rdWFu
 Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4kAFMP/jfJmaJycW9vy8ZdVosU57fd
 uJu7Z/x0uJWBnGK93BGcC8OiHVR/3Bf35JVXECYbotZ2K6QXTj6GyT6K4fAU9V1e
 GA/9Jyq2fuYiI1uKErMUBsAJR1erZN+obFOvMD/QTK6nNJcoUiWbHHSwjrP+irY1
 GidcAufvId2aFKUljTfVYEVGuGlR/DvN7XRl5ejp9pe0SyVno144NJOU2hKxV+WV
 cRi/2zbZQrpDdk/8xjHhLXUah54dk/lUAi8Sj3EGj3i/sp8UHRaCdzUHUI6+FUWj
 IkJiJqadvyF2kAOjX3W9p+AoxpkWT8na43+a+y7BUixwW88rkpbZJbzZPohr2Zp8
 6dr2gXvZcRgyhUcjzS0A0HxbDw86zIXEyjC9HN86jM/ILqutVHTCipHPHAUIbOAp
 H/hTnsrDL+5E7xDrvcxhM3V9dpFNoewHvyemt1egdO9f/MjtVcx+24be3IdDb4Ur
 syr5WQAh6lB1HWd7i7dbz6v5ZoWiycVJoy0ylSiqJRa0hWT6elvkwwkf7ESP4IyE
 K9KEwEg7gVqQjisTUUdq0PYRsHIBa6Bx6HbuA3Tm/gIyQVLwMm9k/gGBVvB+9o85
 azdHP1hyNotISZ7w2jOZ3Gzu804O8ZvV6UUKgBanJ+igwCJ1ChyBPaaq6k0cDa+Q
 PxeFHA1+9Aq3UIhPLvPf
 =A23A
 -----END PGP SIGNATURE-----

Merge tag 'mediatek-drm-fixes-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes for Linux 5.15

1. Revert series "CMDQ refinement of Mediatek DRM driver"

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org
2021-10-15 15:02:57 +10:00
Dave Airlie 1483f0a427 Merge tag 'drm-intel-fixes-2021-10-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc6:
- Fix ACPI object leak
- Fix context leak in user proto-context creation
- Fix missing i915_sw_fence_fini call

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zgrbvgls.fsf@intel.com
2021-10-15 10:00:48 +10:00
Zenghui Yu 82a59c7f45 drm/i915: Free the returned object of acpi_evaluate_dsm()
As per the comment on top of acpi_evaluate_dsm():

| * Evaluate device's _DSM method with specified GUID, revision id and
| * function number. Caller needs to free the returned object.

We should free the returned object of acpi_evaluate_dsm() to avoid memory
leakage. Otherwise the kmemleak splat will be triggered at boot time (if we
compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y).

Fixes: 8e55f99c51 ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com
(cherry picked from commit 149ac2e7ae)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-13 13:41:16 +03:00
Matthew Brost af628cdd64 drm/i915: Fix bug in user proto-context creation that leaked contexts
Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.

v2:
 (Tvrtko)
  - Send as stand alone patch
 (John Harrison)
  - Check for alloc_engines returning NULL
v3:
 (Checkpatch / Tvrtko)
  - Remove braces around single line if statement

Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: d4433c7600 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com
(cherry picked from commit 84edf53776)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-13 13:41:16 +03:00
Laurent Pinchart 0dee6f70fd drm: rcar-du: Don't create encoder for unconnected LVDS outputs
On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU,
even when LVDS outputs are not used. For this reason, the rcar-lvds
driver probes successfully on those platforms even if no further bridge
or panel is connected to the LVDS output, in order to provide the
rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU
driver.

If an LVDS output isn't connected, trying to create a DRM connector for
the output will fail. Fix this by skipping connector creation in that
case, and also skip creation of the DRM encoder as there's no point in
an encoder without a connector.

Fixes: e9e056949c ("drm: rcar-du: lvds: Convert to DRM panel bridge helper")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
(cherry picked from commit 187502afe8)
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-13 07:44:04 +10:00
Dave Airlie ff01a62204 Merge tag 'drm-msm-fixes-2021-10-11' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
* Fix a new crash on dev file close if the dev file was opened when
  GPU is not loaded (such as missing fw in initrd)
* Switch to single drm_sched_entity per priority level per drm_file
  to unbreak multi-context userspace
* Serialize GMU access to fix GMU OOB errors
* Various error path fixes
* A couple integer overflow fixes
* Fix mdp5 cursor plane WARNs

Signed-off-by: Dave Airlie <airlied@redhat.com>
From:   Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtD4u7yyiy+BQLmibUCbn=AdDRu7FrmdViHVx0QrcGf8g@mail.gmail.com
2021-10-12 10:31:14 +10:00
Dan Carpenter c8f01ffc83 drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling
This disables a lock which wasn't enabled and it does not disable
the first lock in the array.

Fixes: 6e0eb52eba ("drm/msm/dsi: Parse bus clocks from a list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001123409.GG2283@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11 17:30:54 -07:00
Dan Carpenter 739b4e7756 drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()
Return an error code if msm_dsi_manager_validate_current_config().
Don't return success.

Fixes: 8b03ad30e3 ("drm/msm/dsi: Use one connector for dual DSI mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001123308.GF2283@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11 17:30:53 -07:00