This patch removes some now dead code.
Spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_max_file_offset() was over-estimating the largest file size for
several cases. This wasn't really a problem before, but now that we support
sparse files, it needs to be more accurate.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We have to manually check the requested truncate size as the check in
vmtruncate() comes too late for Ocfs2.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_align_clusters_to_page_index() needs to cast the clusters shift to
pgoff_t and ocfs2_file_buffered_write() needs loff_t when calculating
destination start for memcpy.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There's no need to recalculate things via ocfs2_max_file_offset() as we've
already done that to fill s_maxbytes, so use that instead. We can also
un-export ocfs2_max_file_offset() then.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_update_inode_atime() calls ocfs2_mark_inode_dirty() to push changes
from the struct inode into the ocfs2 disk inode. The problem is,
ocfs2_mark_inode_dirty() might change other fields, depending on what
happened to the struct inode. Since we don't always have locking to
serialize changes to other fields (like i_size, etc), just fix things up to
only touch the atime field.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
SUNRPC: Replace flush_workqueue() with cancel_work_sync() and friends
NFS: Replace flush_scheduled_work with cancel_work_sync() and friends
SUNRPC: Don't call gss_delete_sec_context() from an rcu context
NFSv4: Don't call put_rpccred() from an rcu callback
NFS: Fix NFSv4 open stateid regressions
NFSv4: Fix a locking regression in nfs4_set_mode_locked()
NFS: Fix put_nfs_open_context
SUNRPC: Fix a race in rpciod_down()
Do not allow cached open for O_RDONLY or O_WRONLY unless the file has been
previously opened in these modes.
Also Fix the calculation of the mode in nfs4_close_prepare. We should only
issue an OPEN_DOWNGRADE if we're sure that we will still be holding the
correct open modes. This may not be the case if we've been doing delegated
opens.
Finally, there is no need to adjust the open mode bit flags in
nfs4_close_done(): that has already been done in nfs4_close_prepare().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't really need to clear &state->inode_states inside
nfs4_set_mode_locked, and doing so without holding the inode->i_lock would
in any case be a bug...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to grab the inode->i_lock atomically with the last reference put in
order to remove the open context that is being freed from the
nfsi->open_files list.
Fix by converting the kref to a standard atomic counter and then using
atomic_dec_and_lock()...
Thanks to Arnd Bergmann for pointing out the problem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch removes some duplicated wireless ioctl entries in the array
'struct ioctl_trans ioctl_start[]' of fs/compat_ioctl.c
These entries are registered twice like:
COMPATIBLE_IOCTL(SIOCGIWPRIV)
and
HANDLE_IOCTL(SIOCGIWPRIV, do_wireless_ioctl)
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Debugging the hardware problems in OLPC trac #1905 would be a whole lot
easier if the correct node offsets were printed for the offending nodes.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
The try_to_freeze() call was in the wrong place; we need it in the
signal-pending loop now that a pending freeze also makes
signal_pending() return true.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
jffs2_add_physical_node_ref() should never really return error -- it's
an internal debugging check which triggered. We really need to work out
why and stop it happening. But in the meantime, let's make the failure
mode a little less nasty.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This patch fix weird behaviour of UDF mounting procedure. To get UID
changed (for now) we have to type
mount -t udf -o uid=some_user,uid=ignore /dev/device /mnt/moun_point
and specifying two uid at once is strange a bit. So with the patch we are
able to mount without additional 'uid=ignore' option. The same for GID
option is done.
This patch will not break current mount scheme (with two option).
Btw this does fix (I hope) the following
[BUG 6124] mount of UDF fs ignores UID and GID options
http://bugzilla.kernel.org/show_bug.cgi?id=6124
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael <auslands-kv@gmx.de>
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it a little more clear that this is the default implementation for
the setleast operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible that another process could acquire a new file lease right
after break_lease() is called during a truncate, but before lease-granting
is disabled by the subsequent get_write_access(). Merely switching the
order of the break_lease() and get_write_access() calls prevents this race.
Signed-off-by: David M. Richter <richterd@citi.umich.edu>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turned out that mounting a corrupted ISO image to a regular file may
succeed, e.g. if an image was prepared as follows:
$ dd if=correct.iso of=bad.iso bs=4k count=8
We then can mount it to a regular file:
# mount -o loop -t iso9660 bad.iso /tmp/file
But mounting it to a directory fails with -ENOTDIR, simply because
the root directory inode doesn't have S_IFDIR set and the condition
in graft_tree() is met:
if (S_ISDIR(nd->dentry->d_inode->i_mode) !=
S_ISDIR(mnt->mnt_root->d_inode->i_mode))
return -ENOTDIR
This is because the root directory inode was read from an incorrect
block. It's supposed to be read from sbi->s_firstdatazone, which is
an absolute value and gets messed up in the case of an incorrect image.
In order to somehow circumvent this we have to check that the root
directory inode is actually a directory after all.
Signed-off-by: Kirill Kuvaldin <kuvkir@epsmu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix file locking for AFS:
(*) Start the lock manager thread under a mutex to avoid a race.
(*) Made the locking non-fair: New readlocks will jump pending writelocks if
there's a readlock currently granted on a file. This makes the behaviour
similar to Linux's VFS locking.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A succesful downcall with a negative result (which indicates that the given
filesystem is not exported to the given user) should not return an error.
Currently mountd is depending on stdio to write these downcalls. With some
versions of libc this appears to cause subsequent writes to attempt to write
all accumulated data (for which writes previously failed) along with any new
data. This can prevent the kernel from seeing responses to later downcalls.
Symptoms will be that nfsd fails to respond to certain requests.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We shouldn't be using negative uid's and gid's in the idmap upcalls.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RFC 3530 says:
If the server uses an attribute to store the exclusive create verifier, it
will signify which attribute by setting the appropriate bit in the attribute
mask that is returned in the results.
Linux uses the atime and mtime to store the verifier, but sends a zeroed out
bitmask back to the client. This patch makes sure that we set the correct
bits in the bitmask in this situation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan Zheng wrote:
> I think I found a bug in ext4/extents.c, "ext4_ext_put_in_cache" uses
> "__u32" to receive physical block number. "ext4_ext_put_in_cache" is
> used in "ext4_ext_get_blocks", it sets ext4 inode's extent cache
> according most recently tree lookup (higher 16 bits of saved physical
> block number are always zero). when serving a mapping request,
> "ext4_ext_get_blocks" first check whether the logical block is in
> inode's extent cache. if the logical block is in the cache and the
> cached region isn't a gap, "ext4_ext_get_blocks" gets physical block
> number by using cached region's physical block number and offset in
> the cached region. as described above, "ext4_ext_get_blocks" may
> return wrong result when there are physical block numbers bigger than
> 0xffffffff.
>
You are right. Thanks for reporting this!
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Cc: <stable@kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the SYSV IPC SHM to work with the changes applied by the new fault handler
patches when CONFIG_MMU=n.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They are handled in a ->compat_ioctl() handler, so it's just noise
when compat_ioctl.c warns which occurs when they are used on non-SBUS
framebuffer devices.
Signed-off-by: David S. Miller <davem@davemloft.net>
Start doing VTOC validation before using its contents.
The validation is adjusted so as not to break existing setups
that do not set the VTOC version, sanity and partition count entries.
VTOC tables with more than 8 partitions will NOT be used.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the Solaris x86 number of partitions (slices) is a way that is
backward compatible with the earlier size.
This works without a new VTOC structure definition as the timestamp
and v_asciilabel fields in the VTOC are not used by the kernel yet.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to only provide the compat_ioctl method
if the downstream de->proc_fops does too, otherwise this
utterly confuses the logic in fs/compat_ioctl.c and we
end up doing the wrong thing.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
docbook: add pipes, other fixes
blktrace: use cpu_clock() instead of sched_clock()
bsg: Fix build for CONFIG_BLOCK=n
[patch] QUEUE_FLAG_READFULL QUEUE_FLAG_WRITEFULL comment fix
b716395e2b added code to handle
a compatability issue with 32bit quota tools, but the new compat
routines are only needed when CONFIG_COMPAT=y (and with this set
to 'n' there are compilation problems since some new typedefs are
not visible).
Reported by Doug Chapman. Fix tuned by a cast of thousands (Andi,
Andreas, Arthur, HPA, Willy)
Signed-off-by: Tony Luck <tony.luck@intel.com>
Fix some typos in pipe.c and splice.c.
Add pipes API to kernel-api.tmpl.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
ext[234]_check_descriptors sanity checks block group descriptor geometry at
mount time, testing whether the block bitmap, inode bitmap, and inode table
reside wholly within the blockgroup. However, the inode table test is off
by one so that if the last block in the inode table resides on the last
block of the block group, the test incorrectly fails. This is because it
tests the last block as (start + length) rather than (start + length - 1).
This can be seen by trying to mount a filesystem made such as:
mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024
which yields:
EXT2-fs error (device loop0): ext2_check_descriptors: Inode table for group 0 not in group (block 101)!
EXT2-fs: group descriptors corrupted!
There is a similar bug in e2fsprogs, patch already sent for that.
(I wonder if inside(), outside(), and/or in_range() should someday be
used in this and other tests throughout the ext filesystems...)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davi fixed a missing cast in the __put_user(), that was making timerfd
return a single byte instead of the full value.
Talking with Michael about the timerfd man page, we think it'd be better to
use a u64 for the returned value, to align it with the eventfd
implementation.
This is an ABI change. The timerfd code is new in 2.6.22 and if we merge this
into 2.6.23 then we should also merge it into 2.6.22.x. That will leave a few
early 2.6.22 kernels out in the wild which might misbehave when a future
timerfd-enabled glibc is run on them.
mtk says: The difference would be that read() will only return 4 bytes, while
the application will expect 8. If the application is checking the size of
returned value, as it should, then it will be able to detect the problem (it
could even be sophisticated enough to know that if this is a 4-byte return,
then it is running on an old 2.6.22 kernel). If the application is not
checking the return from read(), then its 8-byte buffer will not be filled --
the contents of the last 4 bytes will be undefined, so the u64 value as a
whole will be junk.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Davi Arnaut <davi@haxent.com.br>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is probably a leftover from a time when the return wasn't there yet.
Now the extra assignment is just irritating.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Caused by unneeded reopen during reconnect while spinlock held.
Fixes kernel bugzilla bug #7903
Thanks to Lin Feng Shen for testing this, and Amit Arora for
some nice problem determination to narrow this down.
Acked-by: Dave Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
kunmap_atomic() takes the virtual address, not the mapped page as
argument.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'request-queue-t' of git://git.kernel.dk/linux-2.6-block:
[BLOCK] Add request_queue_t and mark it deprecated
[BLOCK] Get rid of request_queue_t typedef
The fallocate syscall returns ENOSYS in case the filesystem does not support
the operation and expects the userlevel code to fill in. This is good in
concept.
The problem is that the libc code for old kernels should be able to
distinguish the case where the syscall is not at all available vs not
functioning for a specific mount point. As is this is not possible and we
always have to invoke the syscall even if the kernel doesn't support it.
I suggest the following patch. Using EOPNOTSUPP is IMO the right thing to do.
Cc: Amit Arora <aarora@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Obviously broken on little-endian; fortunately, the option is not
frequently used...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ Hey, sparse is wonderful, but even better than sparse is having people
like Al that actually _run_ it and fix bugs using it. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Too many remote cpu references due to /proc/stat.
On x86_64, with newer kernel versions, kstat_irqs is a bit of a problem.
On every call to kstat_irqs, the process brings in per-cpu data from all
online cpus. Doing this for NR_IRQS, which is now 256 + 32 * NR_CPUS
results in (256+32*63) * 63 remote cpu references on a 64 cpu config.
/proc/stat is parsed by common commands like top, who etc, causing lots
of cacheline transfers
This statistic seems useless. Other 'big iron' arches disable this.
AK: changed to remove for all SMP setups
AK: add comment
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For display purposes, treat uid's and gid's as unsigned ints for now.
Also fix a typo.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is an variation on the patch sent by Christoph Hellwig which kills
file_count abuse by the Coda kernel module by moving the coda_flush
functionality into coda_release. However part of reason we were using the
coda_flush callback was to allow Coda to pass errors that occur during
writeback from the userspace cache manager back to close().
As Al Viro explained on linux-fsdevel, it is impossible to guarantee that
such errors can in fact be returned back to the caller. There are many
cases where the last reference to a file is not released by the close
system call and it is also impossible to pick some close as a 'last-close'
and delay it until all other references have been destroyed.
The CODA_STORE/CODA_RELEASE upcall combination is clearly a broken design,
and it is better to remove it completely.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes up sources after conversion by Lindent.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If add_to_page_cache_lru() fails, the page will not be locked. But
splice jumps to an error path that does a page release and unlock,
causing a BUG() in unlock_page().
Fix this by adding one more label that just releases the page. This bug
was actually triggered on EL5 by gurudas pai <gurudas.pai@oracle.com>
using fio.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix afs_send_simple_reply() to accept a greater-than-zero return value from
rxrpc_kernel_send_data() as being a successful return rather than thinking it
an error and aborting the call.
rxrpc_kernel_send_data() previously returned zero incorrectly when it worked
successfully, but has been patched to return the number of bytes it
transmitted.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix page index to offset conversion overflows in buffer layer, ecryptfs,
and ocfs2.
It would be nice to convert the whole tree to page_offset, but for now
just fix the bugs.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
a) switch by loff_t == __cmpdi2 use. Replaced with a couple
of obvious ifs; update of ->f_pos in the first one makes sure that we
do the right thing in all cases.
b) block_signals() and unblock_signals() are globals on UML.
Renamed coda ones; in principle UML probably ought to do rename as
well, but that's another story.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] Fix inode size update before data write in xfs_setattr
[XFS] Allow punching holes to free space when at ENOSPC
[XFS] Implement ->page_mkwrite in XFS.
[FS] Implement block_page_mkwrite.
Manually fix up conflict with Nick's VM fault handling patches in
fs/xfs/linux-2.6/xfs_file.c
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
NFSv4: handle lack of clientaddr in option string
NFSv4: debug print ntohl(status) in nfs client callback xdr code
SUNRPC: Clean up the sillyrename code
NFS: Introduce struct nfs_removeargs+nfs_removeres
NFS: Use dentry->d_time to store the parent directory verifier.
SUNRPC: move bkl locking and xdr proc invocation into a common helper
NFSv4: Fix the nfsv4 readlink reply buffer alignment
NFSv4: Fix the readdir reply buffer alignment
NFSv4: More NFSv4 xdr cleanups
NFSv4: Try to recover from getfh failures in nfs4_xdr_dec_open
NFSv4: 'constify' lookup arguments.
NFSv4: Don't fail nfs4_xdr_dec_open if decode_restorefh() failed
NFSv4: Fix open state recovery
NFSD/SUNRPC: Fix the automatic selection of RPCSEC_GSS
If a NFSv4 mount is attempted with string based options, and the
option string doesn't contain a clientaddr= option, the kernel will
currently oops. Check for this situation and return a proper error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
status in nfs client callback xdr code is passed in network order.
print it in host order for better readability.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix a couple of bugs:
- Don't rely on the parent dentry still being valid when the call completes.
Fixes a race with shrink_dcache_for_umount_subtree()
- Don't remove the file if the filehandle has been labelled as stale.
Fix a couple of inefficiencies
- Remove the global list of sillyrenamed files. Instead we can cache the
sillyrename information in the dentry->d_fsdata
- Move common code from unlink_setup/unlink_done into fs/nfs/unlink.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need a common structure for setting up an unlink() rpc call in order to
fix the asynchronous unlink code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that opendata->state is always initialised when we do state
recovery.
Ensure that we set the filehandle in the case where we're doing an
"OPEN_CLAIM_PREVIOUS" call due to a server reboot.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bruce and David's patches clashed.
fs/afs/flock.c: In function 'afs_do_getlk':
fs/afs/flock.c:459: error: void value not ignored as it ought to be
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Share a little common code, reverse the arguments for consistency, drop the
unnecessary "inline", and lowercase the name.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
EX_RDONLY is only called in one place; just put it there.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can now assume that rqst_exp_get_by_name() does not return NULL; so clean
up some unnecessary checks.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I converted the various export-returning functions to return -ENOENT instead
of NULL, but missed a few cases.
This particular case could cause actual bugs in the case of a krb5 client that
doesn't match any ip-based client and that is trying to access a filesystem
not exported to krb5 clients.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The value of nperbucket calculated here is too small--we should be rounding up
instead of down--with the result that the index j in the following loop can
overflow the raparm_hash array. At least in my case, the next thing in memory
turns out to be export_table, so the symptoms I see are crashes caused by the
appearance of four zeroed-out export entries in the first bucket of the hash
table of exports (which were actually entries in the readahead cache, a
pointer to which had been written to the export table in this initialization
code).
It looks like the bug was probably introduced with commit
fce1456a19 ("knfsd: make the readahead params
cache SMP-friendly").
Cc: <stable@kernel.org>
Cc: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).
Here is a short excerpt of the semantic patch performing
this transformation:
@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@
x =
- kmalloc
+ kzalloc
(E1,E2)
... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);
@@
expression E1,E2,E3;
@@
- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)
[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar information can easily be obtained with strace -c.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sb_info structure only contains a single pointer to the character device,
there is no need for the added indirection.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Venus returns an ENOENT error on open, so we shouldn't try to grab the
filehandle for the returned fd.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We ignore signals for about 30 seconds to give userspace a chance to see the
upcall. As we did not block signals we ended up in a busy loop for the
remainder of the period when a signal is received.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the code that processes upcall responses more straightforward, uncovered
at least one bad assumption. We trusted that vc_inuse would be 0 when upcalls
are aborted, however the device may have been reopened.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Make sure device index is not a negative number.
- Unlink queued requests when the device is closed to avoid passing them
to the next opener.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set MS_NOATIME flag to avoid unnecessary calls when the coda inode is
accessed.
Also, set statfs.f_bsize to 4k. 1k is obviously too small for the suggested
IO size.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A directory without children may still be busy when it is the cwd for some
process. We can safely remove such a directory because the VFS prevents
further operations. Also we don't need to call d_delete as it is already
called in vfs_rmdir.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Coda client sets the directory link count to 1 when it isn't sure how many
subdirectories we have. In this case we shouldn't change the link count in
the kernel when a subdirectory is created or removed.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the epoch value to forces a refresh instead of clearing the cached
rights mask and block all further accesses to the object.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When open fails the fd in the response is uninitialized and we ended up taking
a reference on the file struct and never released it.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Looking at the current linus-git tree jbd_debug() define in
include/linux/jbd2.h
extern u8 journal_enable_debug;
#define jbd_debug(n, f, a...) \
do { \
if ((n) <= journal_enable_debug) { \
printk (KERN_DEBUG "(%s, %d): %s: ", \
__FILE__, __LINE__, __FUNCTION__); \
printk (f, ## a); \
} \
} while (0)
> fs/ext4/inode.c: In function âext4_write_inodeâ:
> fs/ext4/inode.c:2906: warning: comparison is always true due to limited
> range of data type
>
> fs/jbd2/recovery.c: In function âjbd2_journal_recoverâ:
> fs/jbd2/recovery.c:254: warning: comparison is always true due to
> limited range of data type
> fs/jbd2/recovery.c:257: warning: comparison is always true due to
> limited range of data type
>
> fs/jbd2/recovery.c: In function âjbd2_journal_skip_recoveryâ:
> fs/jbd2/recovery.c:301: warning: comparison is always true due to
> limited range of data type
>
Noticed all warnings are occurs when the debug level is 0. Then found
the "jbd2: Move jbd2-debug file to debugfs" patch
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b
changed the jbd2_journal_enable_debug from int type to u8, makes the
jbd_debug comparision is always true when the debugging level is 0. Thus
the compile warning occurs.
Thought about changing the jbd2_journal_enable_debug data type back to
int, but can't, because the jbd2-debug is moved to debug fs, where
calling debugfs_create_u8() to create the debugfs entry needs the value
to be u8 type.
Even if we changed the data type back to int, the code is still buggy,
kernel should not print jbd2 debug message if the
jbd2_journal_enable_debug is set to 0. But this is not the case.
The fix is change the level of debugging to 1. The same should fixed in
ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we
probably should fix it all together.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds an interface to set/reset flags which determines each memory
segment should be dumped or not when a core file is generated.
/proc/<pid>/coredump_filter file is provided to access the flags. You can
change the flag status for a particular process by writing to or reading from
the file.
The flag status is inherited to the child process when it is created.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch changes mm_struct.dumpable to a pair of bit flags.
set_dumpable() converts three-value dumpable to two flags and stores it into
lower two bits of mm_struct.flags instead of mm_struct.dumpable.
get_dumpable() behaves in the opposite way.
[akpm@linux-foundation.org: export set_dumpable]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
use vfs_path_lookup instead of open-coding the necessary functionality.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Acked-by: NeilBrown <neilb@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stackable file systems, among others, frequently need to lookup paths or
path components starting from an arbitrary point in the namespace
(identified by a dentry and a vfsmount). Currently, such file systems use
lookup_one_len, which is frowned upon [1] as it does not pass the lookup
intent along; not passing a lookup intent, for example, can trigger BUG_ON's
when stacking on top of NFSv4.
The first patch introduces a new lookup function to allow lookup starting
from an arbitrary point in the namespace. This approach has been suggested
by Christoph Hellwig [2].
The second patch changes sunrpc to use vfs_path_lookup.
The third patch changes nfsctl.c to use vfs_path_lookup.
The fourth patch marks link_path_walk static.
The fifth, and last patch, unexports path_walk because it is no longer
unnecessary to call it directly, and using the new vfs_path_lookup is
cleaner.
For example, the following snippet of code, looks up "some/path/component"
in a directory pointed to by parent_{dentry,vfsmnt}:
err = vfs_path_lookup(parent_dentry, parent_vfsmnt,
"some/path/component", 0, &nd);
if (!err) {
/* exits */
...
/* once done, release the references */
path_release(&nd);
} else if (err == -ENOENT) {
/* doesn't exist */
} else {
/* other error */
}
VFS functions such as lookup_create can be used on the nameidata structure
to pass the create intent to the file system.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the arg+env limit of MAX_ARG_PAGES by copying the strings directly from
the old mm into the new mm.
We create the new mm before the binfmt code runs, and place the new stack at
the very top of the address space. Once the binfmt code runs and figures out
where the stack should be, we move it downwards.
It is a bit peculiar in that we have one task with two mm's, one of which is
inactive.
[a.p.zijlstra@chello.nl: limit stack size]
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
[bunk@stusta.de: unexport bprm_mm_init]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The purpose of audit_bprm() is to log the argv array to a userspace daemon at
the end of the execve system call. Since user-space hasn't had time to run,
this array is still in pristine state on the process' stack; so no need to
copy it, we can just grab it from there.
In order to minimize the damage to audit_log_*() copy each string into a
temporary kernel buffer first.
Currently the audit code requires that the full argument vector fits in a
single packet. So currently it does clip the argv size to a (sysctl) limit,
but only when execve auditing is enabled.
If the audit protocol gets extended to allow for multiple packets this check
can be removed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ollie Wild <aaw@google.com>
Cc: <linux-audit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Split ondemand readahead interface into two functions. I think this makes it
a little clearer for non-readahead experts (like Rusty).
Internally they both call ondemand_readahead(), but the page argument is
changed to an obvious boolean flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass real splice size to page_cache_readahead_ondemand().
The splice code works in chunks of 16 pages internally. The readahead code
should be told of the overall splice size, instead of the internal chunk size.
Otherwize bad things may happen. Imagine some 17-page random splice reads.
The code before this patch will result in two readahead calls: readahead(16);
readahead(1); That leads to one 16-page I/O and one 32-page I/O: one extra I/O
and 31 readahead miss pages.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move synchronous page_cache_readahead_ondemand() call out of splice loop.
This avoids one pointless page allocation/insertion in case of non-zero
ra_pages, or many pointless readahead calls in case of zero ra_pages.
Note that if a user sets ra_pages to less than PIPE_BUFFERS=16 pages, he will
not get expected readahead behavior anyway. The splice code works in batches
of 16 pages, which can be taken as another form of synchronous readahead.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert ext3/ext4 dir reads to use on-demand readahead.
Readahead for dirs operates _not_ on file level, but on blockdev level. This
makes a difference when the data blocks are not continuous. And the read
routine is somehow opaque: there's no handy info about the status of current
page. So a simplified call scheme is employed: to call into readahead
whenever the current page falls out of readahead windows.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is another bug recently introduced into the ecryptfs_setattr()
function in 2.6.22. eCryptfs will attempt to treat special files like
regular eCryptfs files on chmod, chown, and so forth. This leads to a NULL
pointer dereference. This patch validates that the file is a regular file
before proceeding with operations related to the inode's crypt_stat.
Thanks to Ryusuke Konishi for finding this bug and suggesting the fix.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Optimize show_stat to collect per-irq information just once.
On x86_64, with newer kernel versions, kstat_irqs is a bit of a problem.
On every call to kstat_irqs, the process brings in per-cpu data from all
online cpus. Doing this for NR_IRQS, which is now 256 + 32 * NR_CPUS
results in (256+32*63) * 63 remote cpu references on a 64 cpu config.
Considering the fact that we already compute this value per-cpu, we can
save on the remote references as below.
Signed-off-by: Alok N Kataria <alok.kataria@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
unregister_chrdev() does not return meaningful value. This patch makes it
return void like most unregister_* functions.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch converts UDF coding style to kernel coding style using Lindent.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer. This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).
[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change ->fault prototype. We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things. This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).
This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.
struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.
The page is now returned via a page pointer in the vm_fault struct.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.
->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping. The hitch here
is that the ->nopage handler didn't pass down enough information (ie. pgoff).
But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).
Having the populate handler install the pte itself is likewise a nasty thing
to be doing.
This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn. Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.
The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.
After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache. Seems like a fringe functionality anyway.
NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no
users have hit mainline yet.
[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the race between invalidate_inode_pages and do_no_page.
Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.
The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache. Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.
The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.
Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).
Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size. do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size). The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data. Valid mappings to the same
place will see a different page.
Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit. He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight. However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit. Scalability is not an issue.
This patch implements this latter approach. ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so). do_no_page only unlocks the page after setting up the mapping
completely. invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).
This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When changing the file size by a truncate() call, we log the change in the
inode size. However, we do not flush any outstanding data that might not
have been written to disk, thereby violating the data/inode size update
order. This can leave files full of NULLs on crash.
Hence if we are truncating the file, flush any unwritten data that may lie
between the curret on disk inode size and the new inode size that is being
logged to ensure that ordering is preserved.
SGI-PV: 966308
SGI-Modid: xfs-linux-melb:xfs-kern:29174a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Make the free file space transaction able to dip into the reserved blocks
to ensure that we can successfully free blocks when the filesystem is at
ENOSPC.
SGI-PV: 967788
SGI-Modid: xfs-linux-melb:xfs-kern:29167a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Hook XFS up to ->page_mkwrite to ensure that we know about mmap pages
being written to. This allows use to do correct delayed allocation and
ENOSPC checking as well as remap unwritten extents so that they get
converted correctly during writeback. This is done via the generic
block_page_mkwrite code.
SGI-PV: 940392
SGI-Modid: xfs-linux-melb:xfs-kern:29149a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Many filesystems need a ->page-mkwrite callout to correctly
set up pages that have been written to by mmap. This is especially
important when mmap is writing into holes as it allows filesystems
to correctly account for and allocate space before the mmap
write is allowed to proceed.
Protection against truncate races is provided by locking the page
and checking to see whether the page mapping is correct and whether
it is beyond EOF so we don't end up allowing allocations beyond
the current EOF or changing EOF as a result of a mmap write.
SGI-PV: 940392
SGI-Modid: 2.6.x-xfs-melb:linux:29146a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (24 commits)
[CIFS] merge conflict in fs/cifs/export.c
[CIFS] Allow disabling CIFS Unix Extensions as mount option
[CIFS] More whitespace/formatting fixes (noticed by checkpatch)
[CIFS] Typo in previous patch
[CIFS] zero_user_page() conversions
[CIFS] use simple_prepare_write to zero page data
[CIFS] Fix build break - inet.h not included when experimental ifdef off
[CIFS] Add support for new POSIX unlink
[CIFS] whitespace/formatting fixes
[CIFS] Fix oops in cifs_create when nfsd server exports cifs mount
[CIFS] whitespace cleanup
[CIFS] Fix packet signatures for NTLMv2 case
[CIFS] more whitespace fixes
[CIFS] more whitespace cleanup
[CIFS] whitespace cleanup
[CIFS] whitespace cleanup
[CIFS] ipv6 support no longer experimental
[CIFS] Mount should fail if server signing off but client mount option requires it
[CIFS] whitespace fixes
[CIFS] Fix sign mount option and sign proc config setting
...
* 'for-linus' of git://linux-nfs.org/~bfields/linux:
locks: fix vfs_test_lock() comment
locks: make posix_test_lock() interface more consistent
nfs: disable leases over NFS
gfs2: stop giving out non-cluster-coherent leases
locks: export setlease to filesystems
locks: provide a file lease method enabling cluster-coherent leases
locks: rename lease functions to reflect locks.c conventions
locks: share more common lease code
locks: clean up lease_alloc()
locks: convert an -EINVAL return to a BUG
leases: minor break_lease() comment clarification
Previously the only way to do this was to umount all mounts to that server,
turn off a proc setting (/proc/fs/cifs/LinuxExtensionsEnabled).
Fixes Samba bugzilla bug number: 4582 (and also 2008)
Signed-off-by: Steve French <sfrench@us.ibm.com>
Thanks to Doug Chapman for pointing out that the comment here is
inconsistent with the function prototype.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Since posix_test_lock(), like fcntl() and ->lock(), indicates absence or
presence of a conflict lock by setting fl_type to, respectively, F_UNLCK
or something other than F_UNLCK, the return value is no longer needed.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
As Peter Staubach says elsewhere
(http://marc.info/?l=linux-kernel&m=118113649526444&w=2):
> The problem is that some file system such as NFSv2 and NFSv3 do
> not have sufficient support to be able to support leases correctly.
> In particular for these two file systems, there is no over the wire
> protocol support.
>
> Currently, these two file systems fail the fcntl(F_SETLEASE) call
> accidentally, due to a reference counting difference. These file
> systems should fail more consciously, with a proper error to
> indicate that the call is invalid for them.
Define an nfs setlease method that just returns -EINVAL.
If someone can demonstrate a real need, perhaps we could reenable
them in the presence of the "nolock" mount option.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Since gfs2 can't prevent conflicting opens or leases on other nodes, we
probably shouldn't allow it to give out leases at all.
Put the newly defined lease operation into use in gfs2 by turning off
lease, unless we're using the "nolock' locking module (in which case all
locking is local anyway).
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Currently leases are only kept locally, so there's no way for a distributed
filesystem to enforce them against multiple clients. We're particularly
interested in the case of nfsd exporting a cluster filesystem, in which
case nfsd needs cluster-coherent leases in order to implement delegations
correctly.
Also add some documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We've been using the convention that vfs_foo is the function that calls
a filesystem-specific foo method if it exists, or falls back on a
generic method if it doesn't; thus vfs_foo is what is called when some
other part of the kernel (normally lockd or nfsd) wants to get a lock,
whereas foo is what filesystems call to use the underlying local
functionality as part of their lock implementation.
So rename setlease to vfs_setlease (which will call a
filesystem-specific setlease after a later patch) and __setlease to
setlease.
Also, vfs_setlease need only be GPL-exported as long as it's only needed
by lockd and nfsd.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Share more code between setlease (used by nfsd) and fcntl.
Also some minor cleanup.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Christoph Hellwig <hch@infradead.org>
Return the newly allocated structure as the return value instead of
using a struct ** parameter.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no point trying to return an error in these cases, which all represent
bugs in the callers.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
clarify that break_lease() checks for presence of any lock, not just leases.
Signed-off-by: David M. Richter <richterd@citi.umich.edu>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Node addition failure is detected by testing return value of
sysfs_addfm_finish() which returns the number of added and removed
nodes. As the function is called as the last step of addition right
on top of error handling block, the if blocks looked like the
following.
if (sysfs_addrm_finish(&acxt))
success handling, usually return;
/* fall through to error handling */
This is the opposite of usual convention in sysfs and makes the code
difficult to understand. This patch inverts the test and makes those
blocks look more like others.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a subtle bug in sysfs_create_link() failure path. When
symlink creation fails because there's already a node with the same
name, the target sysfs_dirent is put twice - once by failure path of
sysfs_create_link() and once more when the symlink is released.
Fix it by making only the symlink node responsible for putting
target_sd.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With sysfs_fill_super() converted to use sysfs_get_inode(), there is
no user of sysfs_init_inode() outside of fs/sysfs/inode.c. Make it
static.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
While making sysfs indoes hashed, sysfs root inode was left out. Now
that nlink accounting depends on the inode being on the hash, sysfs
root inode nlink isn't adjusted properly.
Put sysfs root inode on the inode hash by allocating it using
sysfs_get_inode() like other sysfs inodes. While at it, massage
comments a bit.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk