Bspec states that we need to set nuke on modify all to prevent
screen corruption with fbc on skl and kbl.
v2: proper workaround name
References: HSD#2227109, HSDES#1404569388
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-27-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 031cd8c85a)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Set bit 8 in 0x43224 to prevent screen corruption and system
hangs on high memory bandwidth conditions. The same wa also suggest
setting bit 31 on ARB_CTL. According to another workaround we gain
better idle power savings when FBC is enabled.
v2: use correct workaround name
v3: split out overlapping wa for corruption avoidance (Ville)
References: HSD#2137218, HSD#2227171, HSD#2136579, BSID#883
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-26-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 303d4ea522)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
According to bspec this prevents screen corruption when fbc is
used.
v2: This workaround has a name, use it (Ville)
v3: remove bogus gen check on ilk/vlv wm path (Ville)
References: HSD#2135555, HSD#2137270, BSID#562
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-25-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 0f78dee6f0)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Workaround for display underrun issues with Y & Yf Tiling.
Set this on all gen9 as stated by bspec.
v2: proper workaround name
References: HSD#2136383, BSID#857
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-22-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 590e8ff04b)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need to disable clock gating in this unit to work around
hardware issue causing possible corruption/hang.
v2: name the bit (Ville)
v3: leave the fix enabled for 2227050 and set correct bit (Matthew)
v4: Split out the skl part in separate commit for easier backport
References: HSD#2227156, HSD#2227050
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-20-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 4de5d7ccbc)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Bspec states that we need to turn off dynamic credit
sharing on kbl revid a0 and b0. This happens by writing bit 28
on 0x4ab8.
References: HSD#2225601, HSD#2226938, HSD#2225763
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-15-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit c0b730d572)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Extend the scope of this workaround, already used in skl,
to also take effect in kbl.
v2: Fix KBL_REVID_E0 (Matthew)
References: HSD#2132677
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-12-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit fe90581987)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Add this workaround for kbl revid A0 only.
v2: rebase
v3: carve out a non related workaround (Chris)
References: HSD#1911714
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-9-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 8401d42fd5)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need this crucial workaround from skl also to all kbl revisions.
Lack of it was causing system hangs on skl enabling so this is
a must have.
v2: Don't add revid checks to gen9 init workarounds (Arun)
References: HSD#2126660
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-8-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit e587f6cb0a)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Past evidence with system hangs and hsds tie
WaForceEnableNonCoherent and WaDisableHDCInvalidation to
WaForceContextSaveRestoreNonCoherent. Documentation
states that WaForceContextSaveRestoreNonCoherent would
not be needed on skl past E0 but evidence proved otherwise. See
commit <510650e8b2ab> ("drm/i915/skl: Fix spurious gpu hang with gt3/gt4
revs"). In this scope consider kbl to be skl with a bigger revision than
E0 so play it safe and bind these two workarounds to the
WaForceContextSaveRestoreNonCoherent, and apply to all gen9.
v2: fix comment (Matthew)
References: HSD#2134449, HSD#2131413
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-7-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit bbaefe72a0)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need this for kbl a0 boards. Note that this should be also
for bxt A0 but we omit that on purpose as bxt A0's are
out of fashion already.
References: HSD#1912158, HSD#4393097
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-5-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 6e4f10c33a)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need to disable clock gating in this unit to work around
hardware issue causing possible corruption/hang.
v2: name the bit (Ville)
v3: leave the fix enabled for 2227050 and set correct bit (Matthew)
References: HSD#2227156, HSD#2227050
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-2-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit eee8efb02a)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Kernel only need to add a register to HW whitelist, required for a
preemption related issue.
Reference: HSD#2131039
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465203169-16591-1-git-send-email-arun.siluvery@linux.intel.com
(cherry picked from commit 6bb6285582)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Found this while browsing Bspec. Looks like it applies to both skl and
kbl.
v2: Also for bxt (Art).
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Cc: "Runyan, Arthur J" <arthur.j.runyan@intel.com>
Reviewed-by: Sonika Jindal<sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463642060-30728-1-git-send-email-daniel.vetter@ffwll.ch
(cherry picked from commit dc00b6a07c)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Merge misc fixes from Andrew Morton:
"20 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
m32r: fix build warning about putc
mm: workingset: printk missing log level, use pr_info()
mm: thp: refix false positive BUG in page_move_anon_rmap()
mm: rmap: call page_check_address() with sync enabled to avoid racy check
mm: thp: move pmd check inside ptl for freeze_page()
vmlinux.lds: account for destructor sections
gcov: add support for gcc version >= 6
mm, meminit: ensure node is online before checking whether pages are uninitialised
mm, meminit: always return a valid node from early_pfn_to_nid
kasan/quarantine: fix bugs on qlist_move_cache()
uapi: export lirc.h header
madvise_free, thp: fix madvise_free_huge_pmd return value after splitting
Revert "scripts/gdb: add documentation example for radix tree"
Revert "scripts/gdb: add a Radix Tree Parser"
scripts/gdb: Perform path expansion to lx-symbol's arguments
scripts/gdb: add constants.py to .gitignore
scripts/gdb: rebuild constants.py on dependancy change
scripts/gdb: silence 'nothing to do' message
kasan: add newline to messages
mm, compaction: prevent VM_BUG_ON when terminating freeing scanner
- Two fixes for hfi1
- Two fixes for i40iw
- On ommission correction in the port table counter arrays
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UaLC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Round three of 4.7 rc fixes:
- two fixes for hfi1
- two fixes for i40iw
- one omission correction in the port table counter arrays"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
i40iw: Enable remote access rights for stag allocation
i40iw: do not print unitialized variables in error message
IB core: Add port_xmit_wait counter
IB/hfi1: Fix sleep inside atomic issue in init_asic_data
IB/hfi1: Correct issues with sc5 computation
Currently, the q_vector initialization routine sets the affinity_mask
of a q_vector based on v_idx value. Meaning a loop iterates on v_idx,
which is an incremental value, and the cpumask is created based on
this value.
This is a problem in systems with multiple logical CPUs per core (like in
SMT scenarios). If we disable some logical CPUs, by turning SMT off for
example, we will end up with a sparse cpu_online_mask, i.e., only the first
CPU in a core is online, and incremental filling in q_vector cpumask might
lead to multiple offline CPUs being assigned to q_vectors.
Example: if we have a system with 8 cores each one containing 8 logical
CPUs (SMT == 8 in this case), we have 64 CPUs in total. But if SMT is
disabled, only the 1st CPU in each core remains online, so the
cpu_online_mask in this case would have only 8 bits set, in a sparse way.
In general case, when SMT is off the cpu_online_mask has only C bits set:
0, 1*N, 2*N, ..., C*(N-1) where
C == # of cores;
N == # of logical CPUs per core.
In our example, only bits 0, 8, 16, 24, 32, 40, 48, 56 would be set.
This patch changes the way q_vector's affinity_mask is created: it iterates
on v_idx, but consumes the CPU index from the cpu_online_mask instead of
just using the v_idx incremental value.
No functional changes were introduced.
Signed-off-by: Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull i2c fixes from Wolfram Sang:
"Four driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: reg: wrong condition checked for of_address_to_resource return value
i2c: tegra: Correct error path in probe
i2c: remove __init from i2c_register_board_info()
i2c: qup: Fix wrong value of index variable
Currently the function ixgbe_poll() returns 0 when it clean completely
the rx rings, but this foul budget accounting in core code.
Fix this returning the actual work done, capped to weight - 1, since
the core doesn't allow to return the full budget when the driver modifies
the napi status
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch sets VSI broadcast promiscuous mode during VSI add sequence
and prevents adding MAC filter if specified MAC address is broadcast.
Change-ID: Ia62251fca095bc449d0497fc44bec3a5a0136773
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
There are a couple of issues I found in i40e_rx_checksum while doing some
recent testing. As a result I have found the Rx checksum logic is pretty
much broken and returning that the checksum is valid for tunnels in cases
where it is not.
First the inner types are not the correct values to use to test for if a
tunnel is present or not. In addition the inner protocol types are not a
bitmask as such performing an OR of the values doesn't make sense. I have
instead changed the code so that the inner protocol types are used to
determine if we report CHECKSUM_UNNECESSARY or not. For anything that does
not end in UDP, TCP, or SCTP it doesn't make much sense to report a
checksum offload since it won't contain a checksum anyway.
This leaves us with the need to set the csum_level based on some value.
For that purpose I am using the tunnel_type field. If the tunnel type is
GRENAT or greater then this means we have a GRE or UDP tunnel with an inner
header. In the case of GRE or UDP we will have a possible checksum present
so for this reason it should be safe to set the csum_level to 1 to indicate
that we are reporting the state of the inner header.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull drm vmware fixes from Dave Airlie:
"These are some fixes for the vmware graphics driver, that fix some
black screen issues on at least Ubuntu 16.04, I think VMware would
like to get these in so stable can pick them up ASAP"
* tag 'drm-fixes-for-v4.7-rc8-vmware' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix error paths when mapping framebuffer
drm/vmwgfx: Fix corner case screen target management
drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set
drm/vmwgfx: Check pin count before attempting to move a buffer
drm/ttm: Make ttm_bo_mem_compat available
drm/vmwgfx: Add an option to change assumed FB bpp
drm/vmwgfx: Work around mode set failure in 2D VMs
drm/vmwgfx: Add a check to handle host message failure
Pull drm fixes from Dave Airlie:
"These are just some i915 and amdgpu fixes that shows up, the amdgpu
ones are polaris fixes, and the i915 one is a major regression fix"
* tag 'drm-fixes-for-v4.7-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: fix power distribution issue for Polaris10 XT
drm/amdgpu: Add a missing register to Polaris golden setting
drm/i915: Ignore panel type from OpRegion on SKL
drm/i915: Update ifdeffery for mutex->owner
Pull scheduler fix from Ingo Molnar:
"Fix a CPU hotplug related corruption of the load average that got
introduced in this merge window"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Correct off by one bug in load migration calculation
We were getting build warning:
arch/m32r/boot/compressed/m32r_sio.c:11:13:
warning: conflicting types for built-in function 'putc'
Here putc is used as a static function so lets just rename it to avoid
the conflict with the builtin putc.
Link: http://lkml.kernel.org/r/1466977046-24724-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 612e44939c ("mm: workingset: eviction buckets for bigmem/lowbit
machines") added a printk without a log level. Quieten it by using
pr_info().
Link: http://lkml.kernel.org/r/1466982072-29836-2-git-send-email-anton@ozlabs.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The VM_BUG_ON_PAGE in page_move_anon_rmap() is more trouble than it's
worth: the syzkaller fuzzer hit it again. It's still wrong for some THP
cases, because linear_page_index() was never intended to apply to
addresses before the start of a vma.
That's easily fixed with a signed long cast inside linear_page_index();
and Dmitry has tested such a patch, to verify the false positive. But
why extend linear_page_index() just for this case? when the avoidance in
page_move_anon_rmap() has already grown ugly, and there's no reason for
the check at all (nothing else there is using address or index).
Remove address arg from page_move_anon_rmap(), remove VM_BUG_ON_PAGE,
remove CONFIG_DEBUG_VM PageTransHuge adjustment.
And one more thing: should the compound_head(page) be done inside or
outside page_move_anon_rmap()? It's usually pushed down to the lowest
level nowadays (and mm/memory.c shows no other explicit use of it), so I
think it's better done in page_move_anon_rmap() than by caller.
Fixes: 0798d3c022 ("mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap()")
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1607120444540.12528@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous patch addresses the race between split_huge_pmd_address()
and someone changing the pmd. The fix is only for splitting of normal
thp (i.e. pmd-mapped thp,) and for splitting of pte-mapped thp there
still is the similar race.
For splitting pte-mapped thp, the pte's conversion is done by
try_to_unmap_one(TTU_MIGRATION). This function checks
page_check_address() to get the target pte, but it can return NULL under
some race, leading to VM_BUG_ON() in freeze_page(). Fortunately,
page_check_address() already has an argument to decide whether we do a
quick/racy check or not, so let's flip it when called from
freeze_page().
Link: http://lkml.kernel.org/r/1466990929-7452-2-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If CONFIG_KASAN is enabled and gcc is configured with
--disable-initfini-array and/or gold linker is used, gcc emits
.ctors/.dtors and .text.startup/.text.exit sections instead of
.init_array/.fini_array. .dtors section is not explicitly accounted in
the linker script and messes vvar/percpu layout.
We want:
ffffffff822bfd80 D _edata
ffffffff822c0000 D __vvar_beginning_hack
ffffffff822c0000 A __vvar_page
ffffffff822c0080 0000000000000098 D vsyscall_gtod_data
ffffffff822c1000 A __init_begin
ffffffff822c1000 D init_per_cpu__irq_stack_union
ffffffff822c1000 A __per_cpu_load
ffffffff822d3000 D init_per_cpu__gdt_page
We got:
ffffffff8279a600 D _edata
ffffffff8279b000 A __vvar_page
ffffffff8279c000 A __init_begin
ffffffff8279c000 D init_per_cpu__irq_stack_union
ffffffff8279c000 A __per_cpu_load
ffffffff8279e000 D __vvar_beginning_hack
ffffffff8279e080 0000000000000098 D vsyscall_gtod_data
ffffffff827ae000 D init_per_cpu__gdt_page
This happens because __vvar_page and .vvar get different addresses in
arch/x86/kernel/vmlinux.lds.S:
. = ALIGN(PAGE_SIZE);
__vvar_page = .;
.vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
/* work around gold bug 13023 */
__vvar_beginning_hack = .;
Discard .dtors/.fini_array/.text.exit, since we don't call dtors.
Merge .text.startup into init text.
Link: http://lkml.kernel.org/r/1467386363-120030-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
early_page_uninitialised looks up an arbitrary PFN. While a machine
without node 0 will boot with "mm, page_alloc: Always return a valid
node from early_pfn_to_nid", it works because it assumes that nodes are
always in PFN order. This is not guaranteed so this patch adds
robustness by always checking if the node being checked is online.
Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
early_pfn_to_nid can return node 0 if a PFN is invalid on machines that
has no node 0. A machine with only node 1 was observed to crash with
the following message:
BUG: unable to handle kernel paging request at 000000000002a3c8
PGD 0
Modules linked in:
Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006
task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000
RIP: reserve_bootmem_region+0x6a/0xef
CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0
Call Trace:
free_all_bootmem+0x4b/0x12a
mem_init+0x70/0xa3
start_kernel+0x25b/0x49b
The problem is that early_page_uninitialised uses the early_pfn_to_nid
helper which returns node 0 for invalid PFNs. No caller of
early_pfn_to_nid cares except early_page_uninitialised. This patch has
early_pfn_to_nid always return a valid node.
Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two bugs on qlist_move_cache(). One is that qlist's tail
isn't set properly. curr->next can be NULL since it is singly linked
list and NULL value on tail is invalid if there is one item on qlist.
Another one is that if cache is matched, qlist_put() is called and it
will set curr->next to NULL. It would cause to stop the loop
prematurely.
These problems come from complicated implementation so I'd like to
re-implement it completely. Implementation in this patch is really
simple. Iterate all qlist_nodes and put them to appropriate list.
Unfortunately, I got this bug sometime ago and lose oops message. But,
the bug looks trivial and no need to attach oops.
Fixes: 55834c5909 ("mm: kasan: initial memory quarantine implementation")
Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Kuthonuzo Luruo <poll.stdin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This header contains the userspace API for lirc.
This is a fixup for commit b7be755733 ("[media] bz#75751: Move
internal header file lirc.h to uapi/"). It moved the header to the
right place, but it forgot to add it at Kbuild. So, despite being at
uapi, it is not copied to the right place.
Fixes: b7be755733 ("[media] bz#75751: Move internal header file lirc.h to uapi/")
Link: http://lkml.kernel.org/r/320c765d32bfc82c582e336d52ffe1026c73c644.1468439021.git.mchehab@s-opensource.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Alec Leamas <leamas.alec@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
madvise_free_huge_pmd should return 0 if the fallback PTE operations are
required. In madvise_free_huge_pmd, if part pages of THP are discarded,
the THP will be split and fallback PTE operations should be used if
splitting succeeds. But the original code will make fallback PTE
operations skipped, after splitting succeeds. Fix that via make
madvise_free_huge_pmd return 0 after splitting successfully, so that the
fallback PTE operations will be done.
Link: http://lkml.kernel.org/r/1467135452-16688-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 9b5580359a ("scripts/gdb: add documentation
example for radix tree")
The python implementation of radix tree was merged at the same time as a
refactoring of the radix tree implementation and doesn't work. The
feature is being reverted, thus we revert the documentation as well.
Link: http://lkml.kernel.org/r/1467127337-11135-7-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit e127a73d41 ("scripts/gdb: add a Radix Tree
Parser")
The python implementation of radix-tree was merged at the same time as
the radix-tree system was heavily reworked from commit e9256efcc8
("radix-tree: introduce radix_tree_empty") to 3bcadd6fa6 ("radix-tree:
free up the bottom bit of exceptional entries for reuse") and no longer
functions, but also prevents other gdb scripts from loading.
This functionality has not yet hit a release, so simply remove it for
now
Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Python doesn't do automatic expansion of paths. In case one passes path
of the from ~/foo/bar the gdb scripts won't automatically expand that
and as a result the symbols files won't be loaded.
Fix this by explicitly expanding all paths which begin with "~"
Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyz
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mika Kuoppala