This patch adds missing SCIF1_X.
Because Document (Rev.0.51) has 2x SCIF1 with no suffix (_A, _B),
this patch names it as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu81sja1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
R-Car V4H has SCIF3 and SCIF3_A, but current PFC setting is mixed.
This patch cleans up SCIF3/SCIF3_A, based on Rev.0.51.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8shsja7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds missing HSCIF1.
Because Document (Rev.0.51) has 2x HSCIF1 with no suffix (_A, _B),
this patch names it as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wncxsjah.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds missing TCLKx_A/TCLKx_B/TCLKx_X.
Because Document (Rev.0.51) has 2x TCLK3/TCLK4 with no suffix (_A, _B),
this patch names them as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qv5txvt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to Rev.0.51 datasheet 004_R-CarV4H_pin_function.xlsx,
GP1_23 - GP1_28 are 1.8/3.3V. But they are not on Table 7.28.
According to the HW team, there are no bits assigned.
This patch follows HW team's comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735fltxwg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current R-Car V4H PFC code has many MOD_SELx definitions with all 0.
But these have no meaning. This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current R-Car V4H PFC code has many IPxSRx definitions with all 0.
But these have no meaning. This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d4xtxyv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current R-Car V4H PFC code has many NOGP definitions. But these are not
used, and they are different from original usage. This patch removes
them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rpdtxz8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
MODSEL8 controls I2C vs. GPIO modes, and the Datasheet (Rev.0.51) is
indicating that I2C needs 1. But we should use 0 for all cases in
reality. New Datasheet should be updated.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ttxzg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds initial pinctrl support for the R-Car V4H (R8A779G0)
SoC, including bias, drive strength and voltage control.
This patch was created based on the Rev.0.51 datasheet.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add PORT_GP_CFG_13() and PORT_GP_13() helper macros, to be used by the
r8a779g0 subdriver.
Based on a larger patch in the BSP by LUU HOAI.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5ty0r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for pin and gpio controller driver for RZ/V2M SoC.
Based on the RZ/G2L driver.
Note that the DETDO and DETMS dedicated pins are currently not
documented in the HW manual as to which pin group they are in.
HW team has since said that the output level of 1.8V I/O group 4
(for MD0-7, and debugger) is the same as the 1.8V I/O group 3.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220624084833.22605-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver adds pinctrl/GPIO support for Intel Meteor Lake. The
GPIO controller is based on the next generation GPIO hardware but still
compatible with the one supported by the Intel core pinctrl/GPIO driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
These PMICs each have 2 GPIOs with the same register layout as AXP813,
but without an ADC function. They all fall back to the AXP221 compatible
string, so only that one needs to be listed in the driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20220621034224.38995-4-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix the compilation error, caused by updating constant variable.
Hence remove redundant constant variable, which is no more useful
as per new design.
The issue is due to some unstaged changes. Fix it up.
Fixes: 36fe26843d ("pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1656489290-20881-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To act as an interrupt controller, a gpio bank relies on the
"interrupt-parent" of the pin controller.
When this optional "interrupt-parent" misses, do not create any IRQ domain.
This fixes a "NULL pointer in stm32_gpio_domain_alloc()" kernel crash when
the interrupt-parent = <exti> property is not declared in the Device Tree.
Fixes: 0eb9f68333 ("pinctrl: Add IRQ support to STM32 gpios")
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220627142350.742973-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Samsung SoC pin controller driver uses only three defines from the
bindings header with pin configuration register values, which proves
the point that this header is not a proper bindings-type abstraction
layer with IDs.
Define the needed register values directly in the driver and stop using
the bindings header.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605160508.134075-8-krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20220624081022.32384-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On i.MX93, the pin mux reg offset is from 0x0,
so need to add the 'ZERO_OFFSET_VALID' flag to make
sure the pin at mux offset 0 can be found.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Link: https://lore.kernel.org/r/20220613031854.1571357-1-ping.bai@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the driver to use an immutable IRQ chip to fix this warning:
"not an immutable chip, please consider fixing it!"
Preserve per-chip labels by adding an ->irq_print_chip() callback.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220622185010.2022515-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix the below kernel-doc warning by adding the description for return
value.
"warning: No description found for return value of
'zynqmp_pmux_get_function_groups'".
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1655462819-28801-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support to handle 'output-enable' and 'bias-high-impedance'
configurations. As part of the output-enable configuration, ZynqMP pinctrl
driver takes care of removing the pins from tri-state.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1655462819-28801-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Set PINCTRL_OCELOT config option as a tristate and add
MODULE_DEVICE_TABLE()/MODULE_LICENSE() to export appropriate
information. Moreover, switch from builtin_platform_driver()
to module_platform_driver().
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20220617103548.490092-1-clement.leger@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some Allwinner SoCs have 2 pinctrls (PIO and R_PIO).
Previous implementation used absolute pin numbering and it was incorrect
for R_PIO pinctrl.
It's necessary to take into account the base pin number.
Fixes: 90be64e276 ("pinctrl: sunxi: implement pin_config_set")
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220525190423.410609-1-andrey.lalaev@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The idea was right but the code was breaking in next.
I assume some unstaged commit was involed. Fix it up.
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Fixes: 36fe26843d ("pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix reporting of input disabled pins on RZ/G2L.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYrVyIgAKCRCKwlD9ZEnx
cL5XAP4m0Q4kcLK0TaUyG3vABAdeoFDgJ3LjxqSaAY4pYoBtBwD/XNH25qtwvEy1
PwwPi0Xrpu/JTgAgdIf1+xGWX4sVtQ8=
=XAtb
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.20
- Fix reporting of input disabled pins on RZ/G2L.
After applying patches I get these warnings:
drivers/pinctrl/mediatek/pinctrl-mt8192.c:1302:56:
warning: "/*" within comment [-Wcomment]
drivers/pinctrl/mediatek/pinctrl-mt8192.c:1362:56:
warning: "/*" within comment [-Wcomment]
Something is wrong with the missing end-slashes. Add them.
Cc: Guodong Liu <guodong.liu@mediatek.com>
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove pin definitions that do not support the R0 & R1 pinconfig property.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-6-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Function bias_combo getter/setters already handle all cases advanced drive
configuration, include drive for I2C related pins.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-5-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on mt8192.
2. Also add the missing pull type array for mt8192 to document the
pull type of each pin and prevent invalid pull type settings.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-4-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch provides the advanced drive raw data setting version
for I2C used pins on mt8192.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-3-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. The dt-binding expects that drive-strength arguments be passed
in mA, but the driver was expecting raw values. And that this
commit changes the driver so that it is aligned with the binding.
2. This commit provides generic driving setup, which support
2/4/6/8/10/12/14/16mA driving, original driver just set raw data
setup setting when use drive-strength property.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-2-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. The bcm2835 pinctrl is also affected by this
warning.
Fix this by making the irqchip in the bcm2835 pinctrl driver immutable.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit b8a19382ac ("pinctrl: bcm2835: Fix support for threaded level
triggered IRQs") assigned the irq_mask/unmask callbacks with the
already existing functions for irq_enable/disable. The wasn't completely
the right way (tm) to fix the issue, because these callbacks shouldn't
be identical. So fix this by rename the functions to represent their
intension and drop the unnecessary irq_enable/disable assigment.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the
function was never assigned to the pingroup (even though the function
exists already).
Add this mode to the related pins.
Fixes: 5373a2c5ab ("pinctrl: qcom: Add msm8916 pinctrl driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220612145955.385787-4-nikita@trvn.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update lpass lpi pin control driver, with clock optional check for ADSP
disabled platforms. This check required for distingushing ADSP based
platforms and ADSP bypass platforms.
In case of ADSP enabled platforms, where audio is routed through ADSP
macro and decodec GDSC Switches are triggered as clocks by pinctrl
driver and ADSP firmware controls them. So It's mandatory to enable
them in ADSP based solutions.
In case of ADSP bypass platforms clock voting is optional as these macro
and dcodec GDSC switches are maintained as power domains and operated from
lpass clock drivers.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are no more used members in the struct intel_pingroup, drop them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add a new member to the struct intel_pingroup to cover generic
pin control group parameters. The idea is to convert all users
(one-by-one) to it and drop old members later on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak."
Fixes: c2f6d059ab ("pinctrl: nomadik: refactor DT parser to take two paths")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607111602.57355-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
None of the sunxi pin controllers have a module reset line. All of the
SoC documentation, where available, agrees. The bits that would be used
for the PIO reset (i.e. matching the order of the clock gate bits) are
always reserved, both in the CCU and in the PRCM. And experiments on
several SoCs, including the A33, confirm that those reserved bits indeed
have no effect.
Let's remove this superfluous code and dependency, and also remove the
include statement that was copied to the other r_pio drivers.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220531053623.43851-2-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Presently there is no way to change pinmux configuration run time.
Hence add a function to get IOMUX resource which can be used to
configure IOMUX GPIO pins run time.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220601152900.1012813-6-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
AMD pingroup can be extended to support multi-function pins.
Hence define and use a macro "AMD_PINS" to represent larger
number of pins.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220601152900.1012813-5-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
AMD pingroup can be extended to support multi-function pins.
Hence use PINCTRL_PINGROUP to manage and represent larger
number of pingroups inline.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220601152900.1012813-4-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The other NAND pins on Port C use the "nand0" function name.
"nand0" also matches all of the other Allwinner SoCs.
Fixes: 4730f33f0d ("pinctrl: sunxi: add allwinner A83T PIO controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220526024956.49500-1-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pdesc could be null but still dereference pdesc->name and it will lead to
a null pointer access. So we move a null check before dereference.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650508019-22554-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that fw_devlink=on by default and fw_devlink supports
"pinctrl-[0-8]" property, the execution will never get to the point
where driver_deferred_probe_check_state() is called before the supplier
has probed successfully or before deferred probe timeout has expired.
So, delete the call and replace it with -ENODEV.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220601070707.3946847-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
you should have received a copy of the gnu general public license
along with this program if not write to the free software foundation
inc 59 temple place suite 330 boston ma 02111-1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pin status reported by pinconf-pins file always reported pin status as
"input enabled" even for pins which had input disabled. Fix this by
returning -EINVAL for the pins which have input disabled.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Reported-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220511094057.3151-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting both
GPIO and pin control, improving a bunch of drivers in the process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and started
to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into proper
sub-drivers.
-----BEGIN PGP SIGNATURE-----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=e5GM
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in drivers
- make irqchips immutable due to the new warning popping up when drivers try to
modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x & gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and descriptors to
gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core
-----BEGIN PGP SIGNATURE-----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=tj/B
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
The irqchip ops are called with a raw spinlock held, so the subsequent
regmap usage cannot use a plain spinlock.
spi-hid-apple-of spi0.0: spihid_apple_of_probe:74
=============================
[ BUG: Invalid wait context ]
5.18.0-asahi-00176-g0fa3ab03bdea #1337 Not tainted
-----------------------------
kworker/u20:3/86 is trying to lock:
ffff8000166b5018 (pinctrl_apple_gpio:462:(®map_config)->lock){....}-{3:3}, at: regmap_lock_spinlock+0x18/0x30
other info that might help us debug this:
context-{5:5}
7 locks held by kworker/u20:3/86:
#0: ffff800017725d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670
#1: ffff80001e33bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670
#2: ffff800017d629a0 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c
#3: ffff80002414e618 (&ctlr->add_lock){+.+.}-{4:4}, at: spi_add_device+0x40/0x80
#4: ffff800024116990 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c
#5: ffff800022d4be58 (request_class){+.+.}-{4:4}, at: __setup_irq+0xa8/0x720
#6: ffff800022d4bcc8 (lock_class){....}-{2:2}, at: __setup_irq+0xcc/0x720
Fixes: a0f160ffcb ("pinctrl: add pinctrl/GPIO driver for Apple SoCs")
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220524142206.18833-1-marcan@marcan.st
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core code:
- Make the managed interrupts more robust by shutting them down in the
core code when the assigned affinity mask does not contain online
CPUs.
- Make the irq simulator chip work on RT
- A small set of cpumask and power manageent cleanups
Drivers:
- A set of changes which mark GPIO interrupt chips immutable to prevent
the GPIO subsystem from modifying it under the hood. This provides
the necessary infrastructure and converts a set of GPIO and pinctrl
drivers over.
- A set of changes to make the pseudo-NMI handling for GICv3 more
robust: a missing barrier and consistent handling of the priority
mask.
- Another set of GICv3 improvements and fixes, but nothing outstanding
- The usual set of improvements and cleanups all over the place
- No new irqchip drivers and not even a new device tree binding!
100+ interrupt chips are truly enough.
-----BEGIN PGP SIGNATURE-----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=xcXv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt handling updates from Thomas Gleixner:
"Core code:
- Make the managed interrupts more robust by shutting them down in
the core code when the assigned affinity mask does not contain
online CPUs.
- Make the irq simulator chip work on RT
- A small set of cpumask and power manageent cleanups
Drivers:
- A set of changes which mark GPIO interrupt chips immutable to
prevent the GPIO subsystem from modifying it under the hood. This
provides the necessary infrastructure and converts a set of GPIO
and pinctrl drivers over.
- A set of changes to make the pseudo-NMI handling for GICv3 more
robust: a missing barrier and consistent handling of the priority
mask.
- Another set of GICv3 improvements and fixes, but nothing
outstanding
- The usual set of improvements and cleanups all over the place
- No new irqchip drivers and not even a new device tree binding!
100+ interrupt chips are truly enough"
* tag 'irq-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
irqchip: Add Kconfig symbols for sunxi drivers
irqchip/gic-v3: Fix priority mask handling
irqchip/gic-v3: Refactor ISB + EOIR at ack time
irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling
genirq/irq_sim: Make the irq_work always run in hard irq context
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
irqchip/gic: Improved warning about incorrect type
irqchip/csky: Return true/false (not 1/0) from bool functions
irqchip/imx-irqsteer: Add runtime PM support
irqchip/imx-irqsteer: Constify irq_chip struct
irqchip/armada-370-xp: Enable MSI affinity configuration
irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value
irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
irqchip/sun6i-r: Use NULL for chip_data
irqchip/xtensa-mx: Fix initial IRQ affinity in non-SMP setup
irqchip/exiu: Fix acknowledgment of edge triggered interrupts
irqchip/gic-v3: Claim iomem resources
dt-bindings: interrupt-controller: arm,gic-v3: Make the v2 compat requirements explicit
irqchip/gic-v3: Relax polling of GIC{R,D}_CTLR.RWP
irqchip/gic-v3: Detect LPI invalidation MMIO registers
...
* Fix immutable IRQ chip examples in the GPIO documentation
* Make use of immutable IRQ chip in Intel pin control drivers
* Add module alias for Intel Apollo Lake
The following is an automated git shortlog grouped by driver:
baytrail:
- make irq_chip immutable
broxton:
- Add module alias for Intel Apollo Lake
cherryview:
- Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
- make irq_chip immutable
Documentation:
- gpio: Advertise irqd_to_hwirq() helper in the examples
- gpio: Fix IRQ mask and unmask examples
intel:
- Fix kernel doc format, i.e. add return sections
- Drop unused irqchip member in struct intel_pinctrl
- make irq_chip immutable
lynxpoint:
- make irq_chip immutable
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYoe2dQAKCRD7cr9lmVa5
zOdhAQCRJVUM4CegYK0d3xFyFjePUYACxY9YJuZrNtM0Tqh+iAEAzFD1tTPTxn5X
1FLWz9MAHyMfbZijxU67HyATbGJyAg0=
=9j0f
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.19-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.19-2
* Fix immutable IRQ chip examples in the GPIO documentation
* Make use of immutable IRQ chip in Intel pin control drivers
* Add module alias for Intel Apollo Lake
The following is an automated git shortlog grouped by driver:
baytrail:
- make irq_chip immutable
broxton:
- Add module alias for Intel Apollo Lake
cherryview:
- Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
- make irq_chip immutable
Documentation:
- gpio: Advertise irqd_to_hwirq() helper in the examples
- gpio: Fix IRQ mask and unmask examples
intel:
- Fix kernel doc format, i.e. add return sections
- Drop unused irqchip member in struct intel_pinctrl
- make irq_chip immutable
lynxpoint:
- make irq_chip immutable
Use devm_platform_get_and_ioremap_resource() and
devm_platform_ioremap_resource() APIs instead of their
open coded analogues.
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Link: https://lore.kernel.org/r/20220520052021.25631-1-zhaoxiao@uniontech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kernel doc validator is not happy:
pinctrl-intel.c:865: warning: No description found for return value of 'intel_gpio_to_pin'
pinctrl-intel.c:904: warning: No description found for return value of 'intel_pin_to_gpio'
2 warnings
Add return sections to the kernel documentation of the above mentioned
functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
- Fix an altmode in the Ocelot driver
- Fix the IES control pins in the Mediatek MT8365 driver
- Fix the UART2 function pin assignments in the
Sunxi (AMLogic) driver
- Fix the signal name of the PA2 SPI pin in the Sunxi
(AMLogic) driver
-----BEGIN PGP SIGNATURE-----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=MGmM
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix an altmode in the Ocelot driver
- Fix the IES control pins in the Mediatek MT8365 driver
- Sunxi (AMLogic) driver:
- Fix the UART2 function pin assignments
- Fix the signal name of the PA2 SPI pin
* tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin
pinctrl: sunxi: fix f1c100s uart2 function
pinctrl: mediatek: mt8365: fix IES control pins
pinctrl: ocelot: Fix for lan966x alt mode
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. Following this change the following warning is
now observed for the starfive driver:
gpio gpiochip0: (11910000.pinctrl): not an immutable chip, please consider fixing it!
Fix this by making the irqchip in the starfive driver immutable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5eb66be34356afd5eb0ea9027329e0939d03d3a0.1652884852.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pm6125 has 9 GPIOs with no holes inbetween.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511220613.1015472-4-marijn.suijten@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no users of irqchip member in struct intel_pinctrl. Drop it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The callers already have dereferenced pointer to GPIO chip, no need to
do it again in chv_gpio_irq_mask_unmask(). Hence, replace IRQ data pointer
by GPIO chip pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
While at it, switch hwirq variable to use the correct type for
the sake of consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
While at it, switch to use hwirq variable instead of pin for
the sake of consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
While at it, switch to use hwirq variable instead of offset for
the sake of consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The np variable is used globally for stm32_pctl_probe() and in one of
its code branches. cppcheck is not happy with that:
pinctrl-stm32.c:1530:23: warning: Local variable 'np' shadows outer variable [shadowVariable]
Instead of simply renaming one of the variables convert some code to
use a device pointer directly.
Fixes: bb949ed9b1 ("pinctrl: stm32: Switch to use for_each_gpiochip_node() helper")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220507102257.26414-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The manual describes function 0x6 of pin PA2 as "SPI1_CLK", so change
the comment to reflect that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220504170736.2669595-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Change suniv f1c100s pinctrl,PD14 multiplexing function lvds1 to uart2
When the pin PD13 and PD14 is setting up to uart2 function in dts,
there's an error occurred:
1c20800.pinctrl: unsupported function uart2 on pin PD14
Because 'uart2' is not any one multiplexing option of PD14,
and pinctrl don't know how to configure it.
So change the pin PD14 lvds1 function to uart2.
Signed-off-by: IotaHydrae <writeforever@foxmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/tencent_70C1308DDA794C81CAEF389049055BACEC09@qq.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We have platform device IDs for Broxton and Apollo Lake, but
module alias is provided only for the former. Make it consistent
by providing an alias for Apollo Lake.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
[ 4.967050] gpio gpiochip1: (e2004190.gpio-input): not an immutable chip, please consider fixing it!
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220428111622.1395831-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When merging the for_each_gpiochip_node() changes, I made
some mistakes by not disabling the clocks on the errorpath,
fix it up.
Fixes: a091208308 ("Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kuninori Morimoto