kexec allows replacing the current kernel with a different one. This is
usually a source of concerns for sysadmins that want to harden a system.
Linux already provides a way to disable loading new kexec kernel via
kexec_load_disabled, but that control is very coard, it is all or nothing
and does not make distinction between a panic kexec and a normal kexec.
This patch introduces new sysctl parameters, with finer tuning to specify
how many times a kexec kernel can be loaded. The sysadmin can set
different limits for kexec panic and kexec reboot kernels. The value can
be modified at runtime via sysctl, but only with a stricter value.
With these new parameters on place, a system with loadpin and verity
enabled, using the following kernel parameters:
sysctl.kexec_load_limit_reboot=0 sysct.kexec_load_limit_panic=1 can have a
good warranty that if initrd tries to load a panic kernel, a malitious
user will have small chances to replace that kernel with a different one,
even if they can trigger timeouts on the disk where the panic kernel
lives.
Link: https://lkml.kernel.org/r/20221114-disable-kexec-reset-v6-3-6a8531a09b9a@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both syscalls (kexec and kexec_file) do the same check, let's factor it
out.
Link: https://lkml.kernel.org/r/20221114-disable-kexec-reset-v6-2-6a8531a09b9a@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the 'struct' keyword for a struct's kernel-doc notation to avoid a
kernel-doc warning:
kernel/user_namespace.c:232: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* idmap_key struct holds the information necessary to find an idmapping in a
Link: https://lkml.kernel.org/r/20230108021243.16683-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When destroying a kthread worker warn if there are still some pending
delayed works. This indicates that the caller should clear all pending
delayed works before destroying the kthread worker.
Link: https://lkml.kernel.org/r/20230104144230.938521-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm: In-kernel support for memory-deny-write-execute (MDWE)",
v2.
The background to this is that systemd has a configuration option called
MemoryDenyWriteExecute [2], implemented as a SECCOMP BPF filter. Its aim
is to prevent a user task from inadvertently creating an executable
mapping that is (or was) writeable. Since such BPF filter is stateless,
it cannot detect mappings that were previously writeable but subsequently
changed to read-only. Therefore the filter simply rejects any
mprotect(PROT_EXEC). The side-effect is that on arm64 with BTI support
(Branch Target Identification), the dynamic loader cannot change an ELF
section from PROT_EXEC to PROT_EXEC|PROT_BTI using mprotect(). For
libraries, it can resort to unmapping and re-mapping but for the main
executable it does not have a file descriptor. The original bug report in
the Red Hat bugzilla - [3] - and subsequent glibc workaround for libraries
- [4].
This series adds in-kernel support for this feature as a prctl
PR_SET_MDWE, that is inherited on fork(). The prctl denies PROT_WRITE |
PROT_EXEC mappings. Like the systemd BPF filter it also denies adding
PROT_EXEC to mappings. However unlike the BPF filter it only denies it if
the mapping didn't previous have PROT_EXEC. This allows to PROT_EXEC ->
PROT_EXEC | PROT_BTI with mprotect(), which is a problem with the BPF
filter.
This patch (of 2):
The aim of such policy is to prevent a user task from creating an
executable mapping that is also writeable.
An example of mmap() returning -EACCESS if the policy is enabled:
mmap(0, size, PROT_READ | PROT_WRITE | PROT_EXEC, flags, 0, 0);
Similarly, mprotect() would return -EACCESS below:
addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0);
mprotect(addr, size, PROT_READ | PROT_WRITE | PROT_EXEC);
The BPF filter that systemd MDWE uses is stateless, and disallows
mprotect() with PROT_EXEC completely. This new prctl allows PROT_EXEC to
be enabled if it was already PROT_EXEC, which allows the following case:
addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0);
mprotect(addr, size, PROT_READ | PROT_EXEC | PROT_BTI);
where PROT_BTI enables branch tracking identification on arm64.
Link: https://lkml.kernel.org/r/20230119160344.54358-1-joey.gouly@arm.com
Link: https://lkml.kernel.org/r/20230119160344.54358-2-joey.gouly@arm.com
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: nd <nd@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Cc: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers now have a folio and can call munlock_vma_folio(). Update the
documentation to refer to munlock_vma_folio().
Link: https://lkml.kernel.org/r/20230116192827.2146732-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All former users now use the folio equivalents, so remove them from the
definition of struct page.
Link: https://lkml.kernel.org/r/20230111142915.1001531-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mmu_notifier_range_update_to_read_only() was originally introduced in
commit c6d23413f8 ("mm/mmu_notifier:
mmu_notifier_range_update_to_read_only() helper") as an optimisation for
device drivers that know a range has only been mapped read-only. However
there are no users of this feature so remove it. As it is the only user
of the struct mmu_notifier_range.vma field remove that also.
Link: https://lkml.kernel.org/r/20230110025722.600912-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The do_idr_lock parameter to bpf_map_free_id was introduced by commit
bd5f5f4ecb ("bpf: Add BPF_MAP_GET_FD_BY_ID"). However, all callers set
do_idr_lock = true since commit 1e0bd5a091 ("bpf: Switch bpf_map ref
counter to atomic64_t so bpf_map_inc() never fails").
While at it also inline __bpf_map_put into its only caller bpf_map_put
now that do_idr_lock can be dropped from its signature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20230202141921.4424-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in conditional compilation based on CONFIG_SRCU.
Therefore, remove the #ifdef.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Borislav Petkov <bp@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select
the right cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=OGU7
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84 ("tracing/ring-buffer: Have
polling block on watermark").
This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().
This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.
As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=FS9z
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.3
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (35 commits)
coresight: tmc: Don't enable TMC when it's not ready.
coresight: tpda: fix return value check in tpda_probe()
Coresight: tpda/tpdm: remove incorrect __exit annotation
coresight: perf: Output trace id only once
coresight: Fix uninitialised variable use in coresight_disable
Documentation: coresight: tpdm: Add dummy comment after sysfs list
Documentation: coresight: Extend title heading syntax in TPDM and TPDA documentation
Documentation: trace: Add documentation for TPDM and TPDA
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
Coresight: Add TPDA link driver
coresight-tpdm: Add integration test support
coresight-tpdm: Add DSB dataset support
dt-bindings: arm: Add CoreSight TPDM hardware
Coresight: Add coresight TPDM source driver
coresight: core: Use IDR for non-cpu bound sources' paths.
coresight: trace-id: Add debug & test macros to Trace ID allocation
coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID
kernel: events: Export perf_report_aux_output_id()
coresight: trace id: Remove legacy get trace ID function.
coresight: etmX.X: stm: Remove trace_id() callback
...
Now that we have the __bpf_kfunc tag, we should use add it to all
existing kfuncs to ensure that they'll never be elided in LTO builds.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230201173016.342758-4-void@manifault.com
It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].
Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.
Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.
[1] https://www.spinics.net/lists/cgroups/msg36254.html
Fixes: f0af1bfc27 ("cgroup/cpuset: Relax constraints to partition & cpus changes")
Cc: stable@vger.kernel.org # v6.1
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Syzkaller triggered a WARN in put_pmu_ctx().
WARNING: CPU: 1 PID: 2245 at kernel/events/core.c:4925 put_pmu_ctx+0x1f0/0x278
This is because there is no locking around the access of "if
(!epc->ctx)" in find_get_pmu_context() and when it is set to NULL in
put_pmu_ctx().
The decrement of the reference count in put_pmu_ctx() also happens
outside of the spinlock, leading to the possibility of this order of
events, and the context being cleared in put_pmu_ctx(), after its
refcount is non zero:
CPU0 CPU1
find_get_pmu_context()
if (!epc->ctx) == false
put_pmu_ctx()
atomic_dec_and_test(&epc->refcount) == true
epc->refcount == 0
atomic_inc(&epc->refcount);
epc->refcount == 1
list_del_init(&epc->pmu_ctx_entry);
epc->ctx = NULL;
Another issue is that WARN_ON for no active PMU events in put_pmu_ctx()
is outside of the lock. If the perf_event_pmu_context is an embedded
one, even after clearing it, it won't be deleted and can be re-used. So
the warning can trigger. For this reason it also needs to be moved
inside the lock.
The above warning is very quick to trigger on Arm by running these two
commands at the same time:
while true; do perf record -- ls; done
while true; do perf record -- ls; done
[peterz: atomic_dec_and_raw_lock*()]
Fixes: bd27568117 ("perf: Rewrite core context handling")
Reported-by: syzbot+697196bc0265049822bd@syzkaller.appspotmail.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230127143141.1782804-2-james.clark@arm.com
With sched_clock() noinstr, provide a noinstr implementation of
local_clock().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.760767043@infradead.org
In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().
Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc6' into sched/core, to pick up fixes
Pick up fixes before merging another batch of cpuidle updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While in theory the timer can be triggered before expires + delta, for the
cases of RT tasks they really have no business giving any lenience for
extra slack time, so override any passed value by the user and always use
zero for schedule_hrtimeout_range() calls. Furthermore, this is similar to
what the nanosleep(2) family already does with current->timer_slack_ns.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230123173206.6764-3-dave@stgolabs.net
avoid leaking memory
-----BEGIN PGP SIGNATURE-----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=qrIZ
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Cleanup the firmware node for the new IRQ MSI domain properly, to
avoid leaking memory
* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Free the fwnode created by msi_create_device_irq_domain()
s390x eBPF JIT needs to know whether a function return value is signed
and which function arguments are signed, in order to generate code
compliant with the s390x ABI.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-26-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
iterators.lskel.h is little-endian, therefore bpf iterator is currently
broken on big-endian systems. Introduce a big-endian version and add
instructions regarding its generation. Unfortunately bpftool's
cross-endianness capabilities are limited to BTF right now, so the
procedure requires access to a big-endian machine or a configured
emulator.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-25-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The first element of a struct bpf_cpumask is a cpumask_t. This is done
to allow struct bpf_cpumask to be cast to a struct cpumask. If this
element were ever moved to another field, any BPF program passing a
struct bpf_cpumask * to a kfunc expecting a const struct cpumask * would
immediately fail to load. Add a build-time assertion so this is
assumption is captured and verified.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230128141537.100777-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY9RqJgAKCRDbK58LschI
gw2IAP9G5uhFO5abBzYLupp6SY3T5j97MUvPwLfFqUEt7EXmuwEA2lCUEWeW0KtR
QX+QmzCa6iHxrW7WzP4DUYLue//FJQY=
=yYqA
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-28
We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).
The main changes are:
1) Implement XDP hints via kfuncs with initial support for RX hash and
timestamp metadata kfuncs, from Stanislav Fomichev and
Toke Høiland-Jørgensen.
Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk
2) Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.
3) Significantly reduce the search time for module symbols by livepatch
and BPF, from Jiri Olsa and Zhen Lei.
4) Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs
in different time intervals, from David Vernet.
5) Fix several issues in the dynptr processing such as stack slot liveness
propagation, missing checks for PTR_TO_STACK variable offset, etc,
from Kumar Kartikeya Dwivedi.
6) Various performance improvements, fixes, and introduction of more
than just one XDP program to XSK selftests, from Magnus Karlsson.
7) Big batch to BPF samples to reduce deprecated functionality,
from Daniel T. Lee.
8) Enable struct_ops programs to be sleepable in verifier,
from David Vernet.
9) Reduce pr_warn() noise on BTF mismatches when they are expected under
the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.
10) Describe modulo and division by zero behavior of the BPF runtime
in BPF's instruction specification document, from Dave Thaler.
11) Several improvements to libbpf API documentation in libbpf.h,
from Grant Seltzer.
12) Improve resolve_btfids header dependencies related to subcmd and add
proper support for HOSTCC, from Ian Rogers.
13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
helper along with BPF selftests, from Ziyang Xuan.
14) Simplify the parsing logic of structure parameters for BPF trampoline
in the x86-64 JIT compiler, from Pu Lehui.
15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
Rust compilation units with pahole, from Martin Rodriguez Reboredo.
16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
from Kui-Feng Lee.
17) Disable stack protection for BPF objects in bpftool given BPF backends
don't support it, from Holger Hoffstätte.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
selftest/bpf: Make crashes more debuggable in test_progs
libbpf: Add documentation to map pinning API functions
libbpf: Fix malformed documentation formatting
selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
bpf/selftests: Verify struct_ops prog sleepable behavior
bpf: Pass const struct bpf_prog * to .check_member
libbpf: Support sleepable struct_ops.s section
bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
selftests/bpf: Fix vmtest static compilation error
tools/resolve_btfids: Alter how HOSTCC is forced
tools/resolve_btfids: Install subcmd headers
bpf/docs: Document the nocast aliasing behavior of ___init
bpf/docs: Document how nested trusted fields may be defined
bpf/docs: Document cpumask kfuncs in a new file
selftests/bpf: Add selftest suite for cpumask kfuncs
selftests/bpf: Add nested trust selftests suite
bpf: Enable cpumasks to be queried and used as kptrs
bpf: Disallow NULLable pointers for trusted kfuncs
...
====================
Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY9RCwAAKCRDbK58LschI
g7drAQDfMPc1Q2CE4LZ9oh2wu1Nt2/85naTDK/WirlCToKs0xwD+NRQOyO3hcoJJ
rOCwfjOlAm+7uqtiwwodBvWgTlDgVAM=
=0fC+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-01-27
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 10 files changed, 170 insertions(+), 59 deletions(-).
The main changes are:
1) Fix preservation of register's parent/live fields when copying
range-info, from Eduard Zingerman.
2) Fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache, from Hou Tao.
3) Fix stack overflow from infinite recursion in sock_map_close(),
from Jakub Sitnicki.
4) Fix missing btf_put() in register_btf_id_dtor_kfuncs()'s error path,
from Jiri Olsa.
5) Fix a splat from bpf_setsockopt() via lsm_cgroup/socket_sock_rcv_skb,
from Kui-Feng Lee.
6) Fix bpf_send_signal[_thread]() helpers to hold a reference on the task,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix the kernel crash caused by bpf_setsockopt().
selftests/bpf: Cover listener cloning with progs attached to sockmap
selftests/bpf: Pass BPF skeleton to sockmap_listen ops tests
bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener
bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself
bpf: Add missing btf_put to register_btf_id_dtor_kfuncs
selftests/bpf: Verify copy_register_state() preserves parent/live fields
bpf: Fix to preserve reg parent/live fields when copying range info
bpf: Fix a possible task gone issue with bpf_send_signal[_thread]() helpers
bpf: Fix off-by-one error in bpf_mem_cache_idx()
====================
Link: https://lore.kernel.org/r/20230127215820.4993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix filter memory leak by calling ftrace_free_filter()
- Initialize trace_printk() earlier so that ftrace_dump_on_oops shows data
on early crashes.
- Update the outdated instructions in scripts/tracing/ftrace-bisect.sh
- Add lockdep_is_held() to fix lockdep warning
- Add allocation failure check in create_hist_field()
- Don't initialize pointer that gets set right away in enabled_monitors_write()
- Update MAINTAINER entries
- Fix help messages in Kconfigs
- Fix kernel-doc header for update_preds()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY9MaCBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqb4AP4p78mTVP/Rw5oLCRUM4E7JGb8hmxuZ
HD0RR9fbvyDaQAD/ffkar/KmvGCfCvBNrkGvvx98dwtGIssIB1dShoEZPAU=
=lBwh
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix filter memory leak by calling ftrace_free_filter()
- Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
data on early crashes.
- Update the outdated instructions in scripts/tracing/ftrace-bisect.sh
- Add lockdep_is_held() to fix lockdep warning
- Add allocation failure check in create_hist_field()
- Don't initialize pointer that gets set right away in enabled_monitors_write()
- Update MAINTAINER entries
- Fix help messages in Kconfigs
- Fix kernel-doc header for update_preds()
* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Update MAINTAINERS file to add tree and mailing list
rv: remove redundant initialization of pointer ptr
ftrace: Maintain samples/ftrace
tracing/filter: fix kernel-doc warnings
lib: Kconfig: fix spellos
trace_events_hist: add check for return value of 'create_hist_field'
tracing/osnoise: Use built-in RCU list checking
tracing: Kconfig: Fix spelling/grammar/punctuation
ftrace/scripts: Update the instructions for ftrace-bisect.sh
tracing: Make sure trace_printk() can output as soon as it can be used
ftrace: Export ftrace_free_filter() to modules
The kernel crash was caused by a BPF program attached to the
"lsm_cgroup/socket_sock_rcv_skb" hook, which performed a call to
`bpf_setsockopt()` in order to set the TCP_NODELAY flag as an
example. Flags like TCP_NODELAY can prompt the kernel to flush a
socket's outgoing queue, and this hook
"lsm_cgroup/socket_sock_rcv_skb" is frequently triggered by
softirqs. The issue was that in certain circumstances, when
`tcp_write_xmit()` was called to flush the queue, it would also allow
BH (bottom-half) to run. This could lead to our program attempting to
flush the same socket recursively, which caused a `skbuff` to be
unlinked twice.
`security_sock_rcv_skb()` is triggered by `tcp_filter()`. This occurs
before the sock ownership is checked in `tcp_v4_rcv()`. Consequently,
if a bpf program runs on `security_sock_rcv_skb()` while under softirq
conditions, it may not possess the lock needed for `bpf_setsockopt()`,
thus presenting an issue.
The patch fixes this issue by ensuring that a BPF program attached to
the "lsm_cgroup/socket_sock_rcv_skb" hook is not allowed to call
`bpf_setsockopt()`.
The differences from v1 are
- changing commit log to explain holding the lock of the sock,
- emphasizing that TCP_NODELAY is not the only flag, and
- adding the fixes tag.
v1: https://lore.kernel.org/bpf/20230125000244.1109228-1-kuifeng@meta.com/
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Fixes: 9113d7e48e ("bpf: expose bpf_{g,s}etsockopt to lsm cgroup")
Link: https://lore.kernel.org/r/20230127001732.4162630-1-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The previous patch has disabled preemption in all the down_read() and
up_read() code paths. For symmetry, this patch extends commit:
48dfb5d256 ("locking/rwsem: Disable preemption while trying for rwsem lock")
... to have preemption disabled in all the down_write() and up_write()
code paths, including downgrade_write().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126003628.365092-4-longman@redhat.com
Commit:
91d2a812df ("locking/rwsem: Make handoff writer optimistically spin on owner")
... assumes that when the owner field is changed to NULL, the lock will
become free soon. But commit:
48dfb5d256 ("locking/rwsem: Disable preemption while trying for rwsem lock")
... disabled preemption when acquiring rwsem for write.
However, preemption has not yet been disabled when acquiring a read lock
on a rwsem. So a reader can add a RWSEM_READER_BIAS to count without
setting owner to signal a reader, got preempted out by a RT task which
then spins in the writer slowpath as owner remains NULL leading to live lock.
One easy way to fix this problem is to disable preemption at all the
down_read*() and up_read() code paths as implemented in this patch.
Fixes: 91d2a812df ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126003628.365092-3-longman@redhat.com
A non-first waiter can potentially spin in the for loop of
rwsem_down_write_slowpath() without sleeping but fail to acquire the
lock even if the rwsem is free if the following sequence happens:
Non-first RT waiter First waiter Lock holder
------------------- ------------ -----------
Acquire wait_lock
rwsem_try_write_lock():
Set handoff bit if RT or
wait too long
Set waiter->handoff_set
Release wait_lock
Acquire wait_lock
Inherit waiter->handoff_set
Release wait_lock
Clear owner
Release lock
if (waiter.handoff_set) {
rwsem_spin_on_owner(();
if (OWNER_NULL)
goto trylock_again;
}
trylock_again:
Acquire wait_lock
rwsem_try_write_lock():
if (first->handoff_set && (waiter != first))
return false;
Release wait_lock
A non-first waiter cannot really acquire the rwsem even if it mistakenly
believes that it can spin on OWNER_NULL value. If that waiter happens
to be an RT task running on the same CPU as the first waiter, it can
block the first waiter from acquiring the rwsem leading to live lock.
Fix this problem by making sure that a non-first waiter cannot spin in
the slowpath loop without sleeping.
Fixes: d257cc8cb8 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230126003628.365092-2-longman@redhat.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPMgtUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGv7wH/3J6vjENrW+Jg/3W
Vhr8bDEBtZ0+myheNZQTjR+/VNLI88UPxp9AV4a5qH1jlPmmqEC1AJcCN5sg9PMB
Kqr8Jr6gOLI8zVKP7fAhbiJVL0bjtZv4G/IEk5y30jNyO40YBVqwhPwUD8Umhooy
DAHDXyDF3laWk6bMEmJODahM0rdVmPLqvH+X+ALcliRh0SK61t+bMG/4Ox/j81HO
7d61Kd0ttXuzsPdwWmZWiDFMc+KxQ4004vCemU4dZwOaDW3RJU7Uc84+fCBH6nJC
HEzcIaAu9FdmSBY0U1fH8BNIiaBAo+nye2LgV5mZ9LQ77MfuMdDo0I+rWjtBmEp0
hayPOPI=
=aO6E
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc5' into locking/core, to pick up fixes
Refresh this branch with the latest locking fixes, before
applying a new series of changes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The .check_member field of struct bpf_struct_ops is currently passed the
member's btf_type via const struct btf_type *t, and a const struct
btf_member *member. This allows the struct_ops implementation to check
whether e.g. an ops is supported, but it would be useful to also enforce
that the struct_ops prog being loaded for that member has other
qualities, like being sleepable (or not). This patch therefore updates
the .check_member() callback to also take a const struct bpf_prog *prog
argument.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF struct_ops programs currently cannot be marked as sleepable. This
need not be the case -- struct_ops programs can be sleepable, and e.g.
invoke kfuncs that export the KF_SLEEPABLE flag. So as to allow future
struct_ops programs to invoke such kfuncs, this patch updates the
verifier to allow struct_ops programs to be sleepable. A follow-on patch
will add support to libbpf for specifying struct_ops.s as a sleepable
struct_ops program, and then another patch will add testcases to the
dummy_st_ops selftest suite which test sleepable struct_ops behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we've added a series of new cpumask kfuncs, we should document
them so users can easily use them. This patch adds a new cpumasks.rst
file to document them.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125143816.721952-6-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Certain programs may wish to be able to query cpumasks. For example, if
a program that is tracing percpu operations wishes to track which tasks
end up running on which CPUs, it could be useful to associate that with
the tasks' cpumasks. Similarly, programs tracking NUMA allocations, CPU
scheduling domains, etc, could potentially benefit from being able to
see which CPUs a task could be migrated to.
This patch enables these types of use cases by introducing a series of
bpf_cpumask_* kfuncs. Amongst these kfuncs, there are two separate
"classes" of operations:
1. kfuncs which allow the caller to allocate and mutate their own
cpumask kptrs in the form of a struct bpf_cpumask * object. Such
kfuncs include e.g. bpf_cpumask_create() to allocate the cpumask, and
bpf_cpumask_or() to mutate it. "Regular" cpumasks such as p->cpus_ptr
may not be passed to these kfuncs, and the verifier will ensure this
is the case by comparing BTF IDs.
2. Read-only operations which operate on const struct cpumask *
arguments. For example, bpf_cpumask_test_cpu(), which tests whether a
CPU is set in the cpumask. Any trusted struct cpumask * or struct
bpf_cpumask * may be passed to these kfuncs. The verifier allows
struct bpf_cpumask * even though the kfunc is defined with struct
cpumask * because the first element of a struct bpf_cpumask is a
cpumask_t, so it is safe to cast.
A follow-on patch will add selftests which validate these kfuncs, and
another will document them.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125143816.721952-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KF_TRUSTED_ARGS kfuncs currently have a subtle and insidious bug in
validating pointers to scalars. Say that you have a kfunc like the
following, which takes an array as the first argument:
bool bpf_cpumask_empty(const struct cpumask *cpumask)
{
return cpumask_empty(cpumask);
}
...
BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...
If a BPF program were to invoke the kfunc with a NULL argument, it would
crash the kernel. The reason is that struct cpumask is defined as a
bitmap, which is itself defined as an array, and is accessed as a memory
address by bitmap operations. So when the verifier analyzes the
register, it interprets it as a pointer to a scalar struct, which is an
array of size 8. check_mem_reg() then sees that the register is NULL and
returns 0, and the kfunc crashes when it passes it down to the cpumask
wrappers.
To fix this, this patch adds a check for KF_ARG_PTR_TO_MEM which
verifies that the register doesn't contain a possibly-NULL pointer if
the kfunc is KF_TRUSTED_ARGS.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125143816.721952-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update the selftests to include a test of passing a stacktrace between the
events of a synthetic event.
Link: https://lkml.kernel.org/r/20230117152236.475439286@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.
# cd /sys/kernel/tracing/
# echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events
# echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 1||prev_state == 2' > events/sched/sched_switch/trigger
# echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger
The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.
# echo 1 > events/synthetic/block_lat/enable
# cat trace
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
kworker/u16:0-767 [006] d..4. 560.645045: block_lat: pid=767 delta=66 stack=STACK:
=> __schedule
=> schedule
=> pipe_read
=> vfs_read
=> ksys_read
=> do_syscall_64
=> 0x966000aa
<idle>-0 [003] d..4. 561.132117: block_lat: pid=0 delta=413787 stack=STACK:
=> __schedule
=> schedule
=> schedule_hrtimeout_range_clock
=> do_sys_poll
=> __x64_sys_poll
=> do_syscall_64
=> 0x966000aa
<...>-153 [006] d..4. 562.068407: block_lat: pid=153 delta=54 stack=STACK:
=> __schedule
=> schedule
=> io_schedule
=> rq_qos_wait
=> wbt_wait
=> __rq_qos_throttle
=> blk_mq_submit_bio
=> submit_bio_noacct_nocheck
=> ext4_bio_write_page
=> mpage_submit_page
=> mpage_process_page_bufs
=> mpage_prepare_extent_to_map
=> ext4_do_writepages
=> ext4_writepages
=> do_writepages
=> __writeback_single_inode
Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow to save stacktraces into a histogram variable. This will be used by
synthetic events to allow a stacktrace from one event to be passed and
displayed by another event.
The special keyword "stacktrace" is to be used to trigger a stack
trace for the event that the histogram trigger is attached to.
echo 'hist:keys=pid:st=stacktrace" > events/sched/sched_waking/trigger
Currently nothing can get access to the "$st" variable above that contains
the stack trace, but that will soon change.
Link: https://lkml.kernel.org/r/20230117152235.856323729@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing a dynamic string field for a synthetic event, the offset
calculation for where to write the next event can use struct_size() to
find what the current size of the structure is.
This simplifies the code and makes it less error prone.
Link: https://lkml.kernel.org/r/20230117152235.698632147@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In a previous commit 7433632c9f, buffer, buffer->buffers and
buffer->buffers[cpu] in ring_buffer_wake_waiters() can be NULL,
and thus the related checks are added.
However, in the same call stack, these variables are also used in
ring_buffer_free_read_page():
tracing_buffers_release()
ring_buffer_wake_waiters(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> Add checks by previous commit
ring_buffer_free_read_page(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> No check
Thus, to avod possible null-pointer derefernces, the related checks
should be added.
These results are reported by a static tool designed by myself.
Link: https://lkml.kernel.org/r/20230113125501.760324-1-baijiaju1990@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's been several times where an event records a function address in
its field and I needed to filter on that address for a specific function
name. It required looking up the function in kallsyms, finding its size,
and doing a compare of "field >= function_start && field < function_end".
But this would change from boot to boot and is unreliable in scripts.
Also, it is useful to have this at boot up, where the addresses will not
be known. For example, on the boot command line:
trace_trigger="initcall_finish.traceoff if func.function == acpi_init"
To implement this, add a ".function" prefix, that will check that the
field is of size long, and the only operations allowed (so far) are "=="
and "!=".
Link: https://lkml.kernel.org/r/20221219183213.916833763@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The pointer ptr is being initialized with a value that is never read,
it is being updated later on a call to strim. Remove the extraneous
initialization.
Link: https://lkml.kernel.org/r/20230116161612.77192-1-colin.i.king@gmail.com
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use the 'struct' keyword for a struct's kernel-doc notation and
use the correct function parameter name to eliminate kernel-doc
warnings:
kernel/trace/trace_events_filter.c:136: warning: cannot understand function prototype: 'struct prog_entry '
kerne/trace/trace_events_filter.c:155: warning: Excess function parameter 'when_to_branch' description in 'update_preds'
Also correct some trivial punctuation problems.
Link: https://lkml.kernel.org/r/20230108021238.16398-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When validating BTF types for KF_TRUSTED_ARGS kfuncs, the verifier
currently enforces that the top-level type must match when calling
the kfunc. In other words, the verifier does not allow the BPF program
to pass a bitwise equivalent struct, despite it being allowed according
to the C standard.
For example, if you have the following type:
struct nf_conn___init {
struct nf_conn ct;
};
The C standard stipulates that it would be safe to pass a struct
nf_conn___init to a kfunc expecting a struct nf_conn. The verifier
currently disallows this, however, as semantically kfuncs may want to
enforce that structs that have equivalent types according to the C
standard, but have different BTF IDs, are not able to be passed to
kfuncs expecting one or the other. For example, struct nf_conn___init
may not be queried / looked up, as it is allocated but may not yet be
fully initialized.
On the other hand, being able to pass types that are equivalent
according to the C standard will be useful for other types of kfunc /
kptrs enabled by BPF. For example, in a follow-on patch, a series of
kfuncs will be added which allow programs to do bitwise queries on
cpumasks that are either allocated by the program (in which case they'll
be a 'struct bpf_cpumask' type that wraps a cpumask_t as its first
element), or a cpumask that was allocated by the main kernel (in which
case it will just be a straight cpumask_t, as in task->cpus_ptr).
Having the two types of cpumasks allows us to distinguish between the
two for when a cpumask is read-only vs. mutatable. A struct bpf_cpumask
can be mutated by e.g. bpf_cpumask_clear(), whereas a regular cpumask_t
cannot be. On the other hand, a struct bpf_cpumask can of course be
queried in the exact same manner as a cpumask_t, with e.g.
bpf_cpumask_test_cpu().
If we were to enforce that top level types match, then a user that's
passing a struct bpf_cpumask to a read-only cpumask_t argument would
have to cast with something like bpf_cast_to_kern_ctx() (which itself
would need to be updated to expect the alias, and currently it only
accommodates a single alias per prog type). Additionally, not specifying
KF_TRUSTED_ARGS is not an option, as some kfuncs take one argument as a
struct bpf_cpumask *, and another as a struct cpumask *
(i.e. cpumask_t).
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGS kfunc must have strict type matching, and instead only
enforces strict type matching if a type is observed to be a "no-cast
alias" (i.e., that the type names are equivalent, but one is suffixed
with ___init).
Additionally, in order to try and be conservative and match existing
behavior / expectations, this patch also enforces strict type checking
for acquire kfuncs. We were already enforcing it for release kfuncs, so
this should also improve the consistency of the semantics for kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230120192523.3650503-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In kfuncs, a "trusted" pointer is a pointer that the kfunc can assume is
safe, and which the verifier will allow to be passed to a
KF_TRUSTED_ARGS kfunc. Currently, a KF_TRUSTED_ARGS kfunc disallows any
pointer to be passed at a nonzero offset, but sometimes this is in fact
safe if the "nested" pointer's lifetime is inherited from its parent.
For example, the const cpumask_t *cpus_ptr field in a struct task_struct
will remain valid until the task itself is destroyed, and thus would
also be safe to pass to a KF_TRUSTED_ARGS kfunc.
While it would be conceptually simple to enable this by using BTF tags,
gcc unfortunately does not yet support this. In the interim, this patch
enables support for this by using a type-naming convention. A new
BTF_TYPE_SAFE_NESTED macro is defined in verifier.c which allows a
developer to specify the nested fields of a type which are considered
trusted if its parent is also trusted. The verifier is also updated to
account for this. A patch with selftests will be added in a follow-on
change, along with documentation for this feature.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230120192523.3650503-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function 'create_hist_field' is called recursively at
trace_events_hist.c:1954 and can return NULL-value that's why we have
to check it to avoid null pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230111120409.4111-1-n.petrova@fintech.ru
Cc: stable@vger.kernel.org
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Bugs have been reported on 8 sockets x86 machines in which the TSC was
wrongly disabled when the system is under heavy workload.
[ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns
[ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped!
[ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns
[ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped!
[ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable
[ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog
[ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998)
[ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564.
[ 821.067990] clocksource: Switched to clocksource hpet
This can be reproduced by running memory intensive 'stream' tests,
or some of the stress-ng subcases such as 'ioport'.
The reason for these issues is the when system is under heavy load, the
read latency of the clocksources can be very high. Even lightweight TSC
reads can show high latencies, and latencies are much worse for external
clocksources such as HPET or the APIC PM timer. These latencies can
result in false-positive clocksource-unstable determinations.
These issues were initially reported by a customer running on a production
system, and this problem was reproduced on several generations of Xeon
servers, especially when running the stress-ng test. These Xeon servers
were not production systems, but they did have the latest steppings
and firmware.
Given that the clocksource watchdog is a continual diagnostic check with
frequency of twice a second, there is no need to rush it when the system
is under heavy load. Therefore, when high clocksource read latencies
are detected, suspend the watchdog timer for 5 minutes.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence false lockdep
warning when CONFIG_PROVE_RCU_LIST is enabled.
Execute as follow:
[tracing]# echo osnoise > current_tracer
[tracing]# echo 1 > tracing_on
[tracing]# echo 0 > tracing_on
The trace_types_lock is held when osnoise_tracer_stop() or
timerlat_tracer_stop() are called in the non-RCU read side section.
So, pass lockdep_is_held(&trace_types_lock) to silence false lockdep
warning.
Link: https://lkml.kernel.org/r/20221227023036.784337-1-nashuiliang@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: dae181349f ("tracing/osnoise: Support a list of trace_array *tr")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.
Since commit 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.
This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.
This patch attempts a different solution for the problem 6e6de3dee5
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee5 (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.
This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.
[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/
Fixes: 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Currently trace_printk() can be used as soon as early_trace_init() is
called from start_kernel(). But if a crash happens, and
"ftrace_dump_on_oops" is set on the kernel command line, all you get will
be:
[ 0.456075] <idle>-0 0dN.2. 347519us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 353141us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 358684us : Unknown type 6
This is because the trace_printk() event (type 6) hasn't been registered
yet. That gets done via an early_initcall(), which may be early, but not
early enough.
Instead of registering the trace_printk() event (and other ftrace events,
which are not trace events) via an early_initcall(), have them registered at
the same time that trace_printk() can be used. This way, if there is a
crash before early_initcall(), then the trace_printk()s will actually be
useful.
Link: https://lkml.kernel.org/r/20230104161412.019f6c55@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e725c731e3 ("tracing: Split tracing initialization into two for early initialization")
Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Setting filters on an ftrace ops results in some memory being allocated
for the filter hashes, which must be freed before the ops can be freed.
This can be done by removing every individual element of the hash by
calling ftrace_set_filter_ip() or ftrace_set_filter_ips() with `remove`
set, but this is somewhat error prone as it's easy to forget to remove
an element.
Make it easier to clean this up by exporting ftrace_free_filter(), which
can be used to clean up all of the filter hashes after an ftrace_ops has
been unregistered.
Using this, fix the ftrace-direct* samples to free hashes prior to being
unloaded. All other code either removes individual filters explicitly or
is built-in and already calls ftrace_free_filter().
Link: https://lkml.kernel.org/r/20230103124912.2948963-3-mark.rutland@arm.com
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e1067a07cf ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: 5fae941b9a ("ftrace/samples: Add multi direct interface test module")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Contemporary versions of GCC (e.g. GCC 12.2.0) drop the alignment
specified by '-falign-functions=N' for functions marked with the
__cold__ attribute, and potentially for callees of __cold__ functions as
these may be implicitly marked as __cold__ by the compiler. LLVM appears
to respect '-falign-functions=N' in such cases.
This has been reported to GCC in bug 88345:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
... which also covers alignment being dropped when '-Os' is used, which
will be addressed in a separate patch.
Currently, use of '-falign-functions=N' is limited to
CONFIG_FUNCTION_ALIGNMENT, which is largely used for performance and/or
analysis reasons (e.g. with CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B), but
isn't necessary for correct functionality. However, this dropped
alignment isn't great for the performance and/or analysis cases.
Subsequent patches will use CONFIG_FUNCTION_ALIGNMENT as part of arm64's
ftrace implementation, which will require all instrumented functions to
be aligned to at least 8-bytes.
This patch works around the dropped alignment by avoiding the use of the
__cold__ attribute when CONFIG_FUNCTION_ALIGNMENT is non-zero, and by
specifically aligning abort(), which GCC implicitly marks as __cold__.
As the __cold macro is now dependent upon config options (which is
against the policy described at the top of compiler_attributes.h), it is
moved into compiler_types.h.
I've tested this by building and booting a kernel configured with
defconfig + CONFIG_EXPERT=y + CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
and looking for misaligned text symbols in /proc/kallsyms:
* arm64:
Before:
# uname -rm
6.2.0-rc3 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
5009
After:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
919
* x86_64:
Before:
# uname -rm
6.2.0-rc3 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
11537
After:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
2805
There's clearly a substantial reduction in the number of misaligned
symbols. From manual inspection, the remaining unaligned text labels are
a combination of ACPICA functions (due to the use of '-Os'), static call
trampolines, and non-function labels in assembly, which will be dealt
with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230123134603.1064407-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Architectures without dynamic ftrace trampolines incur an overhead when
multiple ftrace_ops are enabled with distinct filters. in these cases,
each call site calls a common trampoline which uses
ftrace_ops_list_func() to iterate over all enabled ftrace functions, and
so incurs an overhead relative to the size of this list (including RCU
protection overhead).
Architectures with dynamic ftrace trampolines avoid this overhead for
call sites which have a single associated ftrace_ops. In these cases,
the dynamic trampoline is customized to branch directly to the relevant
ftrace function, avoiding the list overhead.
On some architectures it's impractical and/or undesirable to implement
dynamic ftrace trampolines. For example, arm64 has limited branch ranges
and cannot always directly branch from a call site to an arbitrary
address (e.g. from a kernel text address to an arbitrary module
address). Calls from modules to core kernel text can be indirected via
PLTs (allocated at module load time) to address this, but the same is
not possible from calls from core kernel text.
Using an indirect branch from a call site to an arbitrary trampoline is
possible, but requires several more instructions in the function
prologue (or immediately before it), and/or comes with far more complex
requirements for patching.
Instead, this patch adds a new option, where an architecture can
associate each call site with a pointer to an ftrace_ops, placed at a
fixed offset from the call site. A shared trampoline can recover this
pointer and call ftrace_ops::func() without needing to go via
ftrace_ops_list_func(), avoiding the associated overhead.
This avoids issues with branch range limitations, and avoids the need to
allocate and manipulate dynamic trampolines, making it far simpler to
implement and maintain, while having similar performance
characteristics.
Note that this allows for dynamic ftrace_ops to be invoked directly from
an architecture's ftrace_caller trampoline, whereas existing code forces
the use of ftrace_ops_get_list_func(), which is in part necessary to
permit the ftrace_ops to be freed once unregistered *and* to avoid
branch/address-generation range limitation on some architectures (e.g.
where ops->func is a module address, and may be outside of the direct
branch range for callsites within the main kernel image).
The CALL_OPS approach avoids this problems and is safe as:
* The existing synchronization in ftrace_shutdown() using
ftrace_shutdown() using synchronize_rcu_tasks_rude() (and
synchronize_rcu_tasks()) ensures that no tasks hold a stale reference
to an ftrace_ops (e.g. in the middle of the ftrace_caller trampoline,
or while invoking ftrace_ops::func), when that ftrace_ops is
unregistered.
Arguably this could also be relied upon for the existing scheme,
permitting dynamic ftrace_ops to be invoked directly when ops->func is
in range, but this will require additional logic to handle branch
range limitations, and is not handled by this patch.
* Each callsite's ftrace_ops pointer literal can hold any valid kernel
address, and is updated atomically. As an architecture's ftrace_caller
trampoline will atomically load the ops pointer then dereference
ops->func, there is no risk of invoking ops->func with a mismatches
ops pointer, and updates to the ops pointer do not require special
care.
A subsequent patch will implement architectures support for arm64. There
should be no functional change as a result of this patch alone.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230123134603.1064407-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During suspend, we see failures to suspend 1 in 300-500 suspends.
Looking closer, it appears that asynchronous RCU callbacks are being
queued as lazy even though synchronous callbacks are expedited. These
delays appear to not be very welcome by the suspend/resume code as
evidenced by these occasional suspend failures.
This commit modifies call_rcu() to check if rcu_async_should_hurry(),
which will return true if we are in suspend or in-kernel boot.
[ paulmck: Alphabetize local variables. ]
Ignoring the lazy hint makes the 3000 suspend/resume cycles pass
reliably on a 12th gen 12-core Intel CPU, and there is some evidence
that it also slightly speeds up boot performance.
Fixes: 3cb278e73b ("rcu: Make call_rcu() lazy to save power")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Instead of rejecting the attaching of PROG_TYPE_EXT programs to XDP
programs that consume HW metadata, implement support for propagating the
offload information. The extension program doesn't need to set a flag or
ifindex, these will just be propagated from the target by the verifier.
We need to create a separate offload object for the extension program,
though, since it can be reattached to a different program later (which
means we can't just inherit the offload information from the target).
An additional check is added on attach that the new target is compatible
with the offload information in the extension prog.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-9-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Define a new kfunc set (xdp_metadata_kfunc_ids) which implements all possible
XDP metatada kfuncs. Not all devices have to implement them. If kfunc is not
supported by the target device, the default implementation is called instead.
The verifier, at load time, replaces a call to the generic kfunc with a call
to the per-device one. Per-device kfunc pointers are stored in separate
struct xdp_metadata_ops.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-8-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
New flag BPF_F_XDP_DEV_BOUND_ONLY plus all the infra to have a way
to associate a netdev with a BPF program at load time.
netdevsim checks are dropped in favor of generic check in dev_xdp_attach.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-6-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
To avoid adding forward declarations in the main patch, shuffle
some code around. No functional changes.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-5-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
So we don't have to initialize it manually from several paths.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-4-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF offloading infra will be reused to implement
bound-but-not-offloaded bpf programs. Rename existing
helpers for clarity. No functional changes.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
get disabled due to a value error
- Fix a NULL pointer access on UP configs
- Use the proper locking when updating CPU capacity
-----BEGIN PGP SIGNATURE-----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=aNSK
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the scheduler doesn't use stale frequency scaling values
when latter get disabled due to a value error
- Fix a NULL pointer access on UP configs
- Use the proper locking when updating CPU capacity
* tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings
sched/core: Fix NULL pointer access fault in sched_setaffinity() with non-SMP configs
sched/fair: Fixes for capacity inversion detection
sched/uclamp: Fix a uninitialized variable warnings
If the kheaders archive generation is interrupted then this directory
may be left on disk and not ignored by git.
By using the standard naming schema for temporary files and directories
the default .gitignore and "make clean" rules will apply.
Suggested-by: Nicolas Schier <nicolas@fjasle.eu>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Here are 3 small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wB5g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl+5ACfbXPXK7nokMtxvs/9ybhH+IM63X0AmwYXZ5mK
3dCNVFru/lAZzS7HaR5F
=4fuA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error messages
when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
-----BEGIN PGP SIGNATURE-----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=m1Ee
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, process_dynptr_func first calls dynptr_get_spi and then
is_dynptr_reg_valid_init and is_dynptr_reg_valid_uninit have to call it
again to obtain the spi value. Instead of doing this twice, reuse the
already obtained value (which is by default 0, and is only set for
PTR_TO_STACK, and only used in that case in aforementioned functions).
The input value for these two functions will either be -ERANGE or >= 1,
and can either be permitted or rejected based on the respective check.
Suggested-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, a check on spi resides in dynptr_get_spi, while others
checking its validity for being within the allocated stack slots happens
in is_spi_bounds_valid. Almost always barring a couple of cases (where
being beyond allocated stack slots is not an error as stack slots need
to be populated), both are used together to make checks. Hence, subsume
the is_spi_bounds_valid check in dynptr_get_spi, and return -ERANGE to
specially distinguish the case where spi is valid but not within
allocated slots in the stack state.
The is_spi_bounds_valid function is still kept around as it is a generic
helper that will be useful for other objects on stack similar to dynptr
in the future.
Suggested-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consider a program like below:
void prog(void)
{
{
struct bpf_dynptr ptr;
bpf_dynptr_from_mem(...);
}
...
{
struct bpf_dynptr ptr;
bpf_dynptr_from_mem(...);
}
}
Here, the C compiler based on lifetime rules in the C standard would be
well within in its rights to share stack storage for dynptr 'ptr' as
their lifetimes do not overlap in the two distinct scopes. Currently,
such an example would be rejected by the verifier, but this is too
strict. Instead, we should allow reinitializing over dynptr stack slots
and forget information about the old dynptr object.
The destroy_if_dynptr_stack_slot function already makes necessary checks
to avoid overwriting referenced dynptr slots. This is done to present a
better error message instead of forgetting dynptr information on stack
and preserving reference state, leading to an inevitable but
undecipherable error at the end about an unreleased reference which has
to be associated back to its allocating call instruction to make any
sense to the user.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous commit implemented destroy_if_dynptr_stack_slot. It
destroys the dynptr which given spi belongs to, but still doesn't
invalidate the slices that belong to such a dynptr. While for the case
of referenced dynptr, we don't allow their overwrite and return an error
early, we still allow it and destroy the dynptr for unreferenced dynptr.
To be able to enable precise and scoped invalidation of dynptr slices in
this case, we must be able to associate the source dynptr of slices that
have been obtained using bpf_dynptr_data. When doing destruction, only
slices belonging to the dynptr being destructed should be invalidated,
and nothing else. Currently, dynptr slices belonging to different
dynptrs are indistinguishible.
Hence, allocate a unique id to each dynptr (CONST_PTR_TO_DYNPTR and
those on stack). This will be stored as part of reg->id. Whenever using
bpf_dynptr_data, transfer this unique dynptr id to the returned
PTR_TO_MEM_OR_NULL slice pointer, and store it in a new per-PTR_TO_MEM
dynptr_id register state member.
Finally, after establishing such a relationship between dynptrs and
their slices, implement precise invalidation logic that only invalidates
slices belong to the destroyed dynptr in destroy_if_dynptr_stack_slot.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, while reads are disallowed for dynptr stack slots, writes are
not. Reads don't work from both direct access and helpers, while writes
do work in both cases, but have the effect of overwriting the slot_type.
While this is fine, handling for a few edge cases is missing. Firstly,
a user can overwrite the stack slots of dynptr partially.
Consider the following layout:
spi: [d][d][?]
2 1 0
First slot is at spi 2, second at spi 1.
Now, do a write of 1 to 8 bytes for spi 1.
This will essentially either write STACK_MISC for all slot_types or
STACK_MISC and STACK_ZERO (in case of size < BPF_REG_SIZE partial write
of zeroes). The end result is that slot is scrubbed.
Now, the layout is:
spi: [d][m][?]
2 1 0
Suppose if user initializes spi = 1 as dynptr.
We get:
spi: [d][d][d]
2 1 0
But this time, both spi 2 and spi 1 have first_slot = true.
Now, when passing spi 2 to dynptr helper, it will consider it as
initialized as it does not check whether second slot has first_slot ==
false. And spi 1 should already work as normal.
This effectively replaced size + offset of first dynptr, hence allowing
invalid OOB reads and writes.
Make a few changes to protect against this:
When writing to PTR_TO_STACK using BPF insns, when we touch spi of a
STACK_DYNPTR type, mark both first and second slot (regardless of which
slot we touch) as STACK_INVALID. Reads are already prevented.
Second, prevent writing to stack memory from helpers if the range may
contain any STACK_DYNPTR slots. Reads are already prevented.
For helpers, we cannot allow it to destroy dynptrs from the writes as
depending on arguments, helper may take uninit_mem and dynptr both at
the same time. This would mean that helper may write to uninit_mem
before it reads the dynptr, which would be bad.
PTR_TO_MEM: [?????dd]
Depending on the code inside the helper, it may end up overwriting the
dynptr contents first and then read those as the dynptr argument.
Verifier would only simulate destruction when it does byte by byte
access simulation in check_helper_call for meta.access_size, and
fail to catch this case, as it happens after argument checks.
The same would need to be done for any other non-trivial objects created
on the stack in the future, such as bpf_list_head on stack, or
bpf_rb_root on stack.
A common misunderstanding in the current code is that MEM_UNINIT means
writes, but note that writes may also be performed even without
MEM_UNINIT in case of helpers, in that case the code after handling meta
&& meta->raw_mode will complain when it sees STACK_DYNPTR. So that
invalid read case also covers writes to potential STACK_DYNPTR slots.
The only loophole was in case of meta->raw_mode which simulated writes
through instructions which could overwrite them.
A future series sequenced after this will focus on the clean up of
helper access checks and bugs around that.
Fixes: 97e03f5210 ("bpf: Add verifier support for dynptrs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the dynptr function is not checking the variable offset part
of PTR_TO_STACK that it needs to check. The fixed offset is considered
when computing the stack pointer index, but if the variable offset was
not a constant (such that it could not be accumulated in reg->off), we
will end up a discrepency where runtime pointer does not point to the
actual stack slot we mark as STACK_DYNPTR.
It is impossible to precisely track dynptr state when variable offset is
not constant, hence, just like bpf_timer, kptr, bpf_spin_lock, etc.
simply reject the case where reg->var_off is not constant. Then,
consider both reg->off and reg->var_off.value when computing the stack
pointer index.
A new helper dynptr_get_spi is introduced to hide over these details
since the dynptr needs to be located in multiple places outside the
process_dynptr_func checks, hence once we know it's a PTR_TO_STACK, we
need to enforce these checks in all places.
Note that it is disallowed for unprivileged users to have a non-constant
var_off, so this problem should only be possible to trigger from
programs having CAP_PERFMON. However, its effects can vary.
Without the fix, it is possible to replace the contents of the dynptr
arbitrarily by making verifier mark different stack slots than actual
location and then doing writes to the actual stack address of dynptr at
runtime.
Fixes: 97e03f5210 ("bpf: Add verifier support for dynptrs")
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The root of the problem is missing liveness marking for STACK_DYNPTR
slots. This leads to all kinds of problems inside stacksafe.
The verifier by default inside stacksafe ignores spilled_ptr in stack
slots which do not have REG_LIVE_READ marks. Since this is being checked
in the 'old' explored state, it must have already done clean_live_states
for this old bpf_func_state. Hence, it won't be receiving any more
liveness marks from to be explored insns (it has received REG_LIVE_DONE
marking from liveness point of view).
What this means is that verifier considers that it's safe to not compare
the stack slot if was never read by children states. While liveness
marks are usually propagated correctly following the parentage chain for
spilled registers (SCALAR_VALUE and PTR_* types), the same is not the
case for STACK_DYNPTR.
clean_live_states hence simply rewrites these stack slots to the type
STACK_INVALID since it sees no REG_LIVE_READ marks.
The end result is that we will never see STACK_DYNPTR slots in explored
state. Even if verifier was conservatively matching !REG_LIVE_READ
slots, very next check continuing the stacksafe loop on seeing
STACK_INVALID would again prevent further checks.
Now as long as verifier stores an explored state which we can compare to
when reaching a pruning point, we can abuse this bug to make verifier
prune search for obviously unsafe paths using STACK_DYNPTR slots
thinking they are never used hence safe.
Doing this in unprivileged mode is a bit challenging. add_new_state is
only set when seeing BPF_F_TEST_STATE_FREQ (which requires privileges)
or when jmps_processed difference is >= 2 and insn_processed difference
is >= 8. So coming up with the unprivileged case requires a little more
work, but it is still totally possible. The test case being discussed
below triggers the heuristic even in unprivileged mode.
However, it no longer works since commit
8addbfc7b3 ("bpf: Gate dynptr API behind CAP_BPF").
Let's try to study the test step by step.
Consider the following program (C style BPF ASM):
0 r0 = 0;
1 r6 = &ringbuf_map;
3 r1 = r6;
4 r2 = 8;
5 r3 = 0;
6 r4 = r10;
7 r4 -= -16;
8 call bpf_ringbuf_reserve_dynptr;
9 if r0 == 0 goto pc+1;
10 goto pc+1;
11 *(r10 - 16) = 0xeB9F;
12 r1 = r10;
13 r1 -= -16;
14 r2 = 0;
15 call bpf_ringbuf_discard_dynptr;
16 r0 = 0;
17 exit;
We know that insn 12 will be a pruning point, hence if we force
add_new_state for it, it will first verify the following path as
safe in straight line exploration:
0 1 3 4 5 6 7 8 9 -> 10 -> (12) 13 14 15 16 17
Then, when we arrive at insn 12 from the following path:
0 1 3 4 5 6 7 8 9 -> 11 (12)
We will find a state that has been verified as safe already at insn 12.
Since register state is same at this point, regsafe will pass. Next, in
stacksafe, for spi = 0 and spi = 1 (location of our dynptr) is skipped
seeing !REG_LIVE_READ. The rest matches, so stacksafe returns true.
Next, refsafe is also true as reference state is unchanged in both
states.
The states are considered equivalent and search is pruned.
Hence, we are able to construct a dynptr with arbitrary contents and use
the dynptr API to operate on this arbitrary pointer and arbitrary size +
offset.
To fix this, first define a mark_dynptr_read function that propagates
liveness marks whenever a valid initialized dynptr is accessed by dynptr
helpers. REG_LIVE_WRITTEN is marked whenever we initialize an
uninitialized dynptr. This is done in mark_stack_slots_dynptr. It allows
screening off mark_reg_read and not propagating marks upwards from that
point.
This ensures that we either set REG_LIVE_READ64 on both dynptr slots, or
none, so clean_live_states either sets both slots to STACK_INVALID or
none of them. This is the invariant the checks inside stacksafe rely on.
Next, do a complete comparison of both stack slots whenever they have
STACK_DYNPTR. Compare the dynptr type stored in the spilled_ptr, and
also whether both form the same first_slot. Only then is the later path
safe.
Fixes: 97e03f5210 ("bpf: Add verifier support for dynptrs")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a task oopses with irqs disabled, this can cause various cascading
problems in the oops path such as sleep-from-invalid warnings, and
potentially worse.
Since commit 0258b5fd7c ("coredump: Limit coredumps to a single
thread group"), the unconditional irq enable in coredump_task_exit()
will "fix" the irq state to be enabled early in do_exit(), so currently
this may not be triggerable, but that is coincidental and fragile.
Detect and fix the irqs_disabled() condition in the oops path before
calling do_exit(), similarly to the way in_atomic() is handled.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/20221004094401.708299-1-npiggin@gmail.com/
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket index
but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is
not empty
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F3be
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We take the BTF reference before we register dtors and we need
to put it back when it's done.
We probably won't se a problem with kernel BTF, but module BTF
would stay loaded (because of the extra ref) even when its module
is removed.
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 5ce937d613 ("bpf: Populate pairs of btf_id and destructor kfunc in btf")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230120122148.1522359-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kernel-doc complains about multiple occurrences of "/**" being used
for something that is not a kernel-doc comment, so change all of these
to just use "/*" comment style.
The warning message for all of these is:
FILE:LINE: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
kernel/power/swap.c:585: warning: ...
Structure used for CRC32.
kernel/power/swap.c:600: warning: ...
* CRC32 update function that runs in its own thread.
kernel/power/swap.c:627: warning: ...
* Structure used for LZO data compression.
kernel/power/swap.c:644: warning: ...
* Compression function that runs in its own thread.
kernel/power/swap.c:952: warning: ...
* The following functions allow us to read data using a swap map
kernel/power/swap.c:1111: warning: ...
* Structure used for LZO data decompression.
kernel/power/swap.c:1127: warning: ...
* Decompression function that runs in its own thread.
Also correct one spello/typo.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We currently use module_kallsyms_on_each_symbol that iterates all
modules/symbols and we try to lookup each such address in user
provided symbols/addresses to get list of used modules.
This fix instead only iterates provided kprobe addresses and calls
__module_address on each to get list of used modules. This turned
out to be simpler and also bit faster.
On my setup with workload (executed 10 times):
# test_progs -t kprobe_multi_bench_attach/modules
Current code:
Performance counter stats for './test.sh' (5 runs):
76,081,161,596 cycles:k ( +- 0.47% )
18.3867 +- 0.0992 seconds time elapsed ( +- 0.54% )
With the fix:
Performance counter stats for './test.sh' (5 runs):
74,079,889,063 cycles:k ( +- 0.04% )
17.8514 +- 0.0218 seconds time elapsed ( +- 0.12% )
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230116101009.23694-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently we traverse all symbols of all modules to find the specified
function for the specified module. But in reality, we just need to find
the given module and then traverse all the symbols in it.
Let's add a new parameter 'const char *modname' to function
module_kallsyms_on_each_symbol(), then we can compare the module names
directly in this function and call hook 'fn' after matching. If 'modname'
is NULL, the symbols of all modules are still traversed for compatibility
with other usage cases.
Phase1: mod1-->mod2..(subsequent modules do not need to be compared)
|
Phase2: -->f1-->f2-->f3
Assuming that there are m modules, each module has n symbols on average,
then the time complexity is reduced from O(m * n) to O(m) + O(n).
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230116101009.23694-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Register range information is copied in several places. The intent is
to transfer range/id information from one register/stack spill to
another. Currently this is done using direct register assignment, e.g.:
static void find_equal_scalars(..., struct bpf_reg_state *known_reg)
{
...
struct bpf_reg_state *reg;
...
*reg = *known_reg;
...
}
However, such assignments also copy the following bpf_reg_state fields:
struct bpf_reg_state {
...
struct bpf_reg_state *parent;
...
enum bpf_reg_liveness live;
...
};
Copying of these fields is accidental and incorrect, as could be
demonstrated by the following example:
0: call ktime_get_ns()
1: r6 = r0
2: call ktime_get_ns()
3: r7 = r0
4: if r0 > r6 goto +1 ; r0 & r6 are unbound thus generated
; branch states are identical
5: *(u64 *)(r10 - 8) = 0xdeadbeef ; 64-bit write to fp[-8]
--- checkpoint ---
6: r1 = 42 ; r1 marked as written
7: *(u8 *)(r10 - 8) = r1 ; 8-bit write, fp[-8] parent & live
; overwritten
8: r2 = *(u64 *)(r10 - 8)
9: r0 = 0
10: exit
This example is unsafe because 64-bit write to fp[-8] at (5) is
conditional, thus not all bytes of fp[-8] are guaranteed to be set
when it is read at (8). However, currently the example passes
verification.
First, the execution path 1-10 is examined by verifier.
Suppose that a new checkpoint is created by is_state_visited() at (6).
After checkpoint creation:
- r1.parent points to checkpoint.r1,
- fp[-8].parent points to checkpoint.fp[-8].
At (6) the r1.live is set to REG_LIVE_WRITTEN.
At (7) the fp[-8].parent is set to r1.parent and fp[-8].live is set to
REG_LIVE_WRITTEN, because of the following code called in
check_stack_write_fixed_off():
static void save_register_state(struct bpf_func_state *state,
int spi, struct bpf_reg_state *reg,
int size)
{
...
state->stack[spi].spilled_ptr = *reg; // <--- parent & live copied
if (size == BPF_REG_SIZE)
state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
...
}
Note the intent to mark stack spill as written only if 8 bytes are
spilled to a slot, however this intent is spoiled by a 'live' field copy.
At (8) the checkpoint.fp[-8] should be marked as REG_LIVE_READ but
this does not happen:
- fp[-8] in a current state is already marked as REG_LIVE_WRITTEN;
- fp[-8].parent points to checkpoint.r1, parentage chain is used by
mark_reg_read() to mark checkpoint states.
At (10) the verification is finished for path 1-10 and jump 4-6 is
examined. The checkpoint.fp[-8] never gets REG_LIVE_READ mark and this
spill is pruned from the cached states by clean_live_states(). Hence
verifier state obtained via path 1-4,6 is deemed identical to one
obtained via path 1-6 and program marked as safe.
Note: the example should be executed with BPF_F_TEST_STATE_FREQ flag
set to force creation of intermediate verifier states.
This commit revisits the locations where bpf_reg_state instances are
copied and replaces the direct copies with a call to a function
copy_register_state(dst, src) that preserves 'parent' and 'live'
fields of the 'dst'.
Fixes: 679c782de1 ("bpf/verifier: per-register parent pointers")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230106142214.1040390-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CoreSight trace being updated to use the perf_report_aux_output_id()
in a similar way to intel-pt.
This function in needs export visibility to allow it to be called from
kernel loadable modules, which CoreSight may configured to be built as.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-12-mike.leach@linaro.org
Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
In current bpf_send_signal() and bpf_send_signal_thread() helper
implementation, irq_work is used to handle nmi context. Hao Sun
reported in [1] that the current task at the entry of the helper
might be gone during irq_work callback processing. To fix the issue,
a reference is acquired for the current task before enqueuing into
the irq_work so that the queued task is still available during
irq_work callback processing.
[1] https://lore.kernel.org/bpf/20230109074425.12556-1-sunhao.th@gmail.com/
Fixes: 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
Tested-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230118204815.3331855-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
According to the definition of sizes[NUM_CACHES], when the size passed
to bpf_mem_cache_size() is 256, it should return 6 instead 7.
Fixes: 7c8199e24f ("bpf: Introduce any context BPF specific memory allocator.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230118084630.3750680-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to set
executable bit at creation time (memfd_create).
When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
(mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to be
executable (mode: 0777) after creation.
when MFD_EXEC flag is set, memfd is created with executable bit
(mode:0777), this is the same as the old behavior of memfd_create.
The new pid namespaced sysctl vm.memfd_noexec has 3 values:
0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_EXEC was set.
1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_NOEXEC_SEAL was set.
2: memfd_create() without MFD_NOEXEC_SEAL will be rejected.
The sysctl allows finer control of memfd_create for old-software that
doesn't set the executable bit, for example, a container with
vm.memfd_noexec=1 means the old-software will create non-executable memfd
by default. Also, the value of memfd_noexec is passed to child namespace
at creation time. For example, if the init namespace has
vm.memfd_noexec=2, all its children namespaces will be created with 2.
[akpm@linux-foundation.org: add stub functions to fix build]
[akpm@linux-foundation.org: remove unneeded register_pid_ns_ctl_table_vm() stub, per Jeff]
[akpm@linux-foundation.org: s/pr_warn_ratelimited/pr_warn_once/, per review]
[akpm@linux-foundation.org: fix CONFIG_SYSCTL=n warning]
Link: https://lkml.kernel.org/r/20221215001205.51969-4-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@google.com>
Co-developed-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As BPF can access sample data, it needs to populate the data. Also
remove the logic to get the callchain specifically as it's covered by
the perf_prepare_sample() now.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-9-namhyung@kernel.org
Factor out perf_prepare_header() so that it can call
perf_prepare_sample() without a header if not needed.
Also it checks the filtered_sample_type to avoid duplicate
work when perf_prepare_sample() is called twice (or more).
Suggested-by: Peter Zijlstr <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-8-namhyung@kernel.org
The only thing it does for header in __perf_event_header__init_id() is
to update the header size with event->id_header_size. We can do this
outside and get rid of the argument for the later change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-7-namhyung@kernel.org
The perf_prepare_sample() function sets the perf_sample_data according
to the attr->sample_type before copying it to the ring buffer. But BPF
also wants to access the sample data so it needs to prepare the sample
even before the regular path.
That means perf_prepare_sample() can be called more than once. Set
the data->sample_flags consistently so that it can indicate which fields
are set already and skip them if sets.
Also update the filtered_sample_type to have the dependent flags to
reduce the number of branches.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-6-namhyung@kernel.org
When we saves the branch stack to the perf sample data, we needs to
update the sample flags and the dynamic size. To make sure this is
done consistently, add the perf_sample_save_brstack() helper and
convert all call sites.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-5-namhyung@kernel.org
When we save the raw_data to the perf sample data, we need to update
the sample flags and the dynamic size. To make sure this is done
consistently, add the perf_sample_save_raw_data() helper and convert
all call sites.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-4-namhyung@kernel.org
When we save the callchain to the perf sample data, we need to update
the sample flags and the dynamic size. To ensure this is done consistently,
add the perf_sample_save_callchain() helper and convert all call sites.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-3-namhyung@kernel.org
The perf sample data can be divided into parts. The event->header_size
and event->id_header_size keep the static part of the sample data which
is determined by the sample_type flags.
But other parts like CALLCHAIN and BRANCH_STACK are changing dynamically
so it needs to see the actual data. In preparation of handling repeated
calls for perf_prepare_sample(), it can save the dynamic size to the
perf sample data to avoid the duplicate work.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-2-namhyung@kernel.org
Use scnprintf() for printing the message about dropped messages on
a console. It returns the really written length of the message.
It prevents potential buffer overflow when the returned length is
later used to copy the buffer content.
Note that the previous code was safe because the scratch buffer was
big enough and the message always fit in. But scnprintf() makes
it more safe, definitely.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1530570 ("Memory - corruptions")
Fixes: c4fcc617e1 ("printk: introduce console_prepend_dropped() for dropped messages")
Link: https://lore.kernel.org/r/202301131544.D9E804CCD@keescook
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230117161031.15499-1-pmladek@suse.com
If the cpio command is not available the error emitted by
gen_kheaders.so is not clear as all output of the call to cpio is
discarded:
GNU make 4.4:
GEN kernel/kheaders_data.tar.xz
find: 'standard output': Broken pipe
find: write error
make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127
make[1]: *** [scripts/Makefile.build:504: kernel] Error 2
GNU make < 4.4:
GEN kernel/kheaders_data.tar.xz
make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [scripts/Makefile.build:504: kernel] Error 2
Add an explicit check that will trigger a clear message about the issue:
CHK kernel/kheaders_data.tar.xz
./kernel/gen_kheaders.sh: line 17: type: cpio: not found
The other commands executed by gen_kheaders.sh are part of a standard
installation, so they are not checked.
Reported-by: Amy Parker <apark0006@student.cerritos.edu>
Link: https://lore.kernel.org/lkml/CAPOgqxFva=tOuh1UitCSN38+28q3BNXKq19rEsVNPRzRqKqZ+g@mail.gmail.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Boot and suspend/resume should not be slowed down in kernels built with
CONFIG_RCU_LAZY=y. In particular, suspend can sometimes fail in such
kernels.
This commit therefore adds rcu_async_hurry(), rcu_async_relax(), and
rcu_async_should_hurry() functions that track whether or not either
a boot or a suspend/resume operation is in progress. This will
enable a later commit to refrain from laziness during those times.
Export rcu_async_should_hurry(), rcu_async_hurry(), and rcu_async_relax()
for later use by rcutorture.
[ paulmck: Apply feedback from Steve Rostedt. ]
Fixes: 3cb278e73b ("rcu: Make call_rcu() lazy to save power")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY8WHEgAKCRDbK58LschI
g+gDAP9K24FwikbCHy145i/KHFaIk4ZDSIfjff8uyKDq73h9QwEAvBvrxko7d+dh
EHdhJGoqufV8n5wilYOrOGN7ShMwFAg=
=aFQl
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-01-16
We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 22 insertions(+), 24 deletions(-).
The main changes are:
1) Mitigate a Spectre v4 leak in unprivileged BPF from speculative
pointer-as-scalar type confusion, from Luis Gerhorst.
2) Fix a splat when pid 1 attaches a BPF program that attempts to
send killing signal to itself, from Hao Sun.
3) Fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events, from Paul Moore.
4) Fix BPF verifier warning triggered from invalid kfunc call in
backtrack_insn, also from Hao Sun.
5) Fix potential deadlock in htab_lock_bucket from same bucket index
but different map_locked index, from Tonghao Zhang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation
bpf: hash map, avoid deadlock with suitable hash mask
bpf: remove the do_idr_lock parameter from bpf_prog_free_id()
bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD
bpf: Skip task with pid=1 in send_signal_common()
bpf: Skip invalid kfunc call in backtrack_insn
====================
Link: https://lore.kernel.org/r/20230116230745.21742-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we allow to load any tracing program as sleepable,
but BPF_TRACE_RAW_TP can't sleep. Making the check explicit
for tracing programs attach types, so sleepable BPF_TRACE_RAW_TP
will fail to load.
Updating the verifier error to mention iter programs as well.
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230117223705.440975-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
msi_create_device_irq_domain() creates a firmware node for the new domain,
which is never freed. kmemleak reports:
unreferenced object 0xffff888120ba9a00 (size 96):
comm "systemd-modules", pid 221, jiffies 4294893411 (age 635.732s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 e0 19 8b 83 ff ff ff ff ................
00 00 00 00 00 00 00 00 18 9a ba 20 81 88 ff ff ........... ....
backtrace:
[<000000008cdbc98d>] __irq_domain_alloc_fwnode+0x51/0x2b0
[<00000000c57acf9d>] msi_create_device_irq_domain+0x283/0x670
[<000000009b567982>] __pci_enable_msix_range+0x49e/0xdb0
[<0000000077cc1445>] pci_alloc_irq_vectors_affinity+0x11f/0x1c0
[<00000000532e9ef5>] mlx5_irq_table_create+0x24c/0x940 [mlx5_core]
[<00000000fabd2b80>] mlx5_load+0x1fa/0x680 [mlx5_core]
[<000000006bb22ae4>] mlx5_init_one+0x485/0x670 [mlx5_core]
[<00000000eaa5e1ad>] probe_one+0x4c2/0x720 [mlx5_core]
[<00000000df8efb43>] local_pci_probe+0xd6/0x170
[<0000000085cb9924>] pci_device_probe+0x231/0x6e0
Use the proper free operation for the firmware wnode so the name is freed
during error unwind of msi_create_device_irq_domain() and also free the
node in msi_remove_device_irq_domain() if it was automatically allocated.
To avoid extra NULL pointer checks make irq_domain_free_fwnode() tolerant
of NULL.
Fixes: 27a6dea3eb ("genirq/msi: Provide msi_create/free_device_irq_domain()")
Reported-by: Omri Barazi <obarazi@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-24af6665e2da+c9-msi_leak_jgg@nvidia.com
group_cpus_evenly() has become a generic function which can be used for
other subsystems than the interrupt subsystem, so move it into lib/.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-6-ming.lei@redhat.com
Map irq vector into group, which allows to abstract the algorithm for
a generic use case outside of the interrupt core.
Rename irq_build_affinity_masks as group_cpus_evenly, so the API can be
reused for blk-mq to make default queue mapping even though irq vectors
aren't involved.
No functional change, just rename vector as group.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-5-ming.lei@redhat.com
Prepare for abstracting irq_build_affinity_masks() into a public function
for assigning all CPUs evenly into several groups.
Don't pass irq_affinity_desc array to irq_build_affinity_masks, instead
return a cpumask array by storing each assigned group into one element of
the array.
This allows to provide a generic interface for grouping all CPUs evenly
from a NUMA and CPU locality viewpoint, and the cost is one extra allocation
in irq_build_affinity_masks(), which should be fine since it is done via
GFP_KERNEL and irq_build_affinity_masks() is a slow path anyway.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-4-ming.lei@redhat.com
Pass affinity managed mask array to irq_build_affinity_masks() so that the
index of the first affinity managed vector is always zero.
This allows to simplify the implementation a bit.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-3-ming.lei@redhat.com
The 'firstvec' parameter is always same with the parameter of
'startvec', so use 'startvec' directly inside irq_build_affinity_masks().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-2-ming.lei@redhat.com
Fix W=1 kernel-doc warning:
kernel/printk/printk.c:
- Include function parameter in console_lock_spinning_disable_and_check()
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230116125635.374567-1-anuradha@debian.org
Several mutexes are taken while setting up console serial ports. In
particular, the tty_port->mutex and @console_mutex are taken:
serial_pnp_probe
serial8250_register_8250_port
uart_add_one_port (locks tty_port->mutex)
uart_configure_port
register_console (locks @console_mutex)
In order to synchronize kgdb's tty_find_polling_driver() with
register_console(), commit 6193bc9084 ("tty: serial: kgdboc:
synchronize tty_find_polling_driver() and register_console()") takes
the @console_mutex. However, this leads to the following call chain
(with locking):
platform_probe
kgdboc_probe
configure_kgdboc (locks @console_mutex)
tty_find_polling_driver
uart_poll_init (locks tty_port->mutex)
uart_set_options
This is clearly deadlock potential due to the reverse lock ordering.
Since uart_set_options() requires holding @console_mutex in order to
serialize early initialization of the serial-console lock, take the
@console_mutex in uart_poll_init() instead of configure_kgdboc().
Since configure_kgdboc() was using @console_mutex for safe traversal
of the console list, change it to use the SRCU iterator instead.
Add comments to uart_set_options() kerneldoc mentioning that it
requires holding @console_mutex (aka the console_list_lock).
Fixes: 6193bc9084 ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Export console_srcu_read_lock_is_held() to fix build kgdboc as a module.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230112161213.1434854-1-john.ogness@linutronix.de
The kernel commit 9a5418bc48 ("sched/core: Use kfree_rcu() in
do_set_cpus_allowed()") introduces a bug for kernels built with non-SMP
configs. Calling sched_setaffinity() on such a uniprocessor kernel will
cause cpumask_copy() to be called with a NULL pointer leading to general
protection fault. This is not really a problem in real use cases as
there aren't that many uniprocessor kernel configs in use and calling
sched_setaffinity() on such a uniprocessor system doesn't make sense.
Fix this problem by making sure cpumask_copy() will not be called in
such a case.
Fixes: 9a5418bc48 ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()")
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230115193122.563036-1-longman@redhat.com
In presence of a lot of small weight tasks like sched_idle tasks, normal
or high weight tasks can see their ideal runtime (sched_slice) to increase
to hundreds ms whereas it normally stays below sysctl_sched_latency.
2 normal tasks running on a CPU will have a max sched_slice of 12ms
(half of the sched_period). This means that they will make progress
every sysctl_sched_latency period.
If we now add 1000 idle tasks on the CPU, the sched_period becomes
3006 ms and the ideal runtime of the normal tasks becomes 609 ms.
It will even become 1500ms if the idle tasks belongs to an idle cgroup.
This means that the scheduler will look for picking another waiting task
after 609ms running time (1500ms respectively). The idle tasks change
significantly the way the 2 normal tasks interleave their running time
slot whereas they should have a small impact.
Such long sched_slice can delay significantly the release of resources
as the tasks can wait hundreds of ms before the next running slot just
because of idle tasks queued on the rq.
Cap the ideal_runtime to sysctl_sched_latency to make sure that tasks will
regularly make progress and will not be significantly impacted by
idle/background tasks queued on the rq.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20230113133613.257342-1-vincent.guittot@linaro.org
Just one fix for modules by Nick.
-----BEGIN PGP SIGNATURE-----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=aa3U
-----END PGP SIGNATURE-----
Merge tag 'modules-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module fix from Luis Chamberlain:
"Just one fix for modules by Nick"
* tag 'modules-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kallsyms: Fix scheduling with interrupts disabled in self-test
Move the ACTION_ONLY() macro so that it is not between the kernel-doc
notation and the function definition for seccomp_run_filters(),
eliminating a kernel-doc warning:
kernel/seccomp.c:400: warning: expecting prototype for seccomp_run_filters(). Prototype was for ACTION_ONLY() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230108021228.15975-1-rdunlap@infradead.org
kallsyms_on_each* may schedule so must not be called with interrupts
disabled. The iteration function could disable interrupts, but this
also changes lookup_symbol() to match the change to the other timing
code.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Link: https://lore.kernel.org/all/bug-216902-206035@https.bugzilla.kernel.org%2F/
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212251728.8d0872ff-oliver.sang@intel.com
Fixes: 30f3bb0977 ("kallsyms: Add self-test facility")
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
!CONFIG_SMP builds complain about rebind_worker() being unused. Its only
user, rebind_workers() is indeed only defined for CONFIG_SMP, so just fold
the two lines back up there.
Link: http://lore.kernel.org/r/20230113143102.2e94d74f@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To mitigate Spectre v4, 2039f26f3a ("bpf: Fix leakage due to
insufficient speculative store bypass mitigation") inserts lfence
instructions after 1) initializing a stack slot and 2) spilling a
pointer to the stack.
However, this does not cover cases where a stack slot is first
initialized with a pointer (subject to sanitization) but then
overwritten with a scalar (not subject to sanitization because
the slot was already initialized). In this case, the second write
may be subject to speculative store bypass (SSB) creating a
speculative pointer-as-scalar type confusion. This allows the
program to subsequently leak the numerical pointer value using,
for example, a branch-based cache side channel.
To fix this, also sanitize scalars if they write a stack slot
that previously contained a pointer. Assuming that pointer-spills
are only generated by LLVM on register-pressure, the performance
impact on most real-world BPF programs should be small.
The following unprivileged BPF bytecode drafts a minimal exploit
and the mitigation:
[...]
// r6 = 0 or 1 (skalar, unknown user input)
// r7 = accessible ptr for side channel
// r10 = frame pointer (fp), to be leaked
//
r9 = r10 # fp alias to encourage ssb
*(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked
// lfence added here because of pointer spill to stack.
//
// Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor
// for no r9-r10 dependency.
//
*(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr
// 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID,
// store may be subject to SSB
//
// fix: also add an lfence when the slot contained a ptr
//
r8 = *(u64 *)(r9 - 8)
// r8 = architecturally a scalar, speculatively a ptr
//
// leak ptr using branch-based cache side channel:
r8 &= 1 // choose bit to leak
if r8 == 0 goto SLOW // no mispredict
// architecturally dead code if input r6 is 0,
// only executes speculatively iff ptr bit is 1
r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast)
SLOW:
[...]
After running this, the program can time the access to *(r7 + 0) to
determine whether the chosen pointer bit was 0 or 1. Repeat this 64
times to recover the whole address on amd64.
In summary, sanitization can only be skipped if one scalar is
overwritten with another scalar. Scalar-confusion due to speculative
store bypass can not lead to invalid accesses because the pointer
bounds deducted during verification are enforced using branchless
logic. See 979d63d50c ("bpf: prevent out of bounds speculation on
pointer arithmetic") for details.
Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks}
because speculative leaks are likely unexpected if these were enabled.
For example, leaking the address to a protected log file may be acceptable
while disabling the mitigation might unintentionally leak the address
into the cached-state of a map that is accessible to unprivileged
processes.
Fixes: 2039f26f3a ("bpf: Fix leakage due to insufficient speculative store bypass mitigation")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Henriette Hofmeier <henriette.hofmeier@rub.de>
Link: https://lore.kernel.org/bpf/edc95bad-aada-9cfc-ffe2-fa9bb206583c@cs.fau.de
Link: https://lore.kernel.org/bpf/20230109150544.41465-1-gerhorst@cs.fau.de
Low level noinstr context-tracking code is calling out to instrumented
code on KASAN:
vmlinux.o: warning: objtool: __ct_user_enter+0x72: call to __kasan_check_write() leaves .noinstr.text section
vmlinux.o: warning: objtool: __ct_user_exit+0x47: call to __kasan_check_write() leaves .noinstr.text section
Use even lower level atomic methods to avoid the instrumentation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.458034262@infradead.org
Robot reported that trace_hardirqs_{on,off}() tickle the forbidden
_rcuidle() tracepoint through local_irq_{en,dis}able().
For 'sane' configs, these calls will only happen with RCU enabled and
as such can use the regular tracepoint. This also means it's possible
to trace them from NMI context again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.477416709@infradead.org
ARCH_WANTS_NO_INSTR (a superset of CONFIG_GENERIC_ENTRY) disallows any
and all tracing when RCU isn't enabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.416110581@infradead.org
Per commit 56e62a7370 ("s390: convert to generic entry") the last
and only callers of trace_hardirqs_{on,off}_caller() went away, clean
up.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.355283994@infradead.org
No callers left that have already disabled RCU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.927904612@infradead.org
The problem, per commit fc98c3c8c9 ("printk: use rcuidle console
tracepoint"), was printk usage from the cpuidle path where RCU was
already disabled.
Per the patches earlier in this series, this is no longer the case.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.865735001@infradead.org
Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.
However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.
Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org
All callers should still have RCU enabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.190860672@infradead.org
The whole disable-RCU, enable-IRQS dance is very intricate since
changing IRQ state is traced, which depends on RCU.
Add two helpers for the cpuidle case that mirror the entry code:
ct_cpuidle_enter()
ct_cpuidle_exit()
And fix all the cases where the enter/exit dance was buggy.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org
Traversing the Perf Domains requires rcu_read_lock() to be held and is
conditional on sched_energy_enabled(). Ensure right protections applied.
Also skip capacity inversion detection for our own pd; which was an
error.
Fixes: 44c7b80bff ("sched/fair: Detect capacity inversion")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230112122708.330667-3-qyousef@layalina.io
The deadlock still may occur while accessed in NMI and non-NMI
context. Because in NMI, we still may access the same bucket but with
different map_locked index.
For example, on the same CPU, .max_entries = 2, we update the hash map,
with key = 4, while running bpf prog in NMI nmi_handle(), to update
hash map with key = 20, so it will have the same bucket index but have
different map_locked index.
To fix this issue, using min mask to hash again.
Fixes: 20b6cc34ea ("bpf: Avoid hashtab deadlock with map_locked")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230111092903.92389-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
triggering an integer overflow and disabling the feature.
- Fix use-after-free bug in dup_user_cpus_ptr().
- Fix do_set_cpus_allowed() deadlock scenarios related to calling kfree() with
the pi_lock held. NOTE: the rcu_free() is the 'lazy' solution here - we looked
at patches to free the structure after the pi_lock got dropped, but that looked
quite a bit messier - and none of this is truly performance critical. We can
revisit this if it's too lazy of a solution ...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gCfL
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix scheduler frequency invariance bug related to overly long
tickless periods triggering an integer overflow and disabling the
feature.
- Fix use-after-free bug in dup_user_cpus_ptr().
- Fix do_set_cpus_allowed() deadlock scenarios related to calling
kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
solution here - we looked at patches to free the structure after the
pi_lock got dropped, but that looked quite a bit messier - and none
of this is truly performance critical. We can revisit this if it's
too lazy of a solution ...
* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Use kfree_rcu() in do_set_cpus_allowed()
sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
sched/core: Fix arch_scale_freq_tick() on tickless systems
The rcu_boost_kthread_setaffinity() function is invoked at
rcutree_online_cpu() and rcutree_offline_cpu() time, early in the online
timeline and late in the offline timeline, respectively. It is also
invoked from rcutree_dead_cpu(), however, in the absence of userspace
manipulations (for which userspace must take responsibility), this call
is redundant with that from rcutree_offline_cpu(). This redundancy can
be demonstrated by printing out the relevant cpumasks
This commit therefore removes the call to rcu_boost_kthread_setaffinity()
from rcutree_dead_cpu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
It has been reported that isolated CPUs can suffer from interference due to
per-CPU kworkers waking up just to die.
A surge of workqueue activity during initial setup of a latency-sensitive
application (refresh_vm_stats() being one of the culprits) can cause extra
per-CPU kworkers to be spawned. Then, said latency-sensitive task can be
running merrily on an isolated CPU only to be interrupted sometime later by
a kworker marked for death (cf. IDLE_WORKER_TIMEOUT, 5 minutes after last
kworker activity).
Prevent this by affining kworkers to the wq_unbound_cpumask (which doesn't
contain isolated CPUs, cf. HK_TYPE_WQ) before waking them up after marking
them with WORKER_DIE.
Changing the affinity does require a sleepable context, leverage the newly
introduced pool->idle_cull_work to get that.
Remove dying workers from pool->workers and keep track of them in a
separate list. This intentionally prevents for_each_loop_worker() from
iterating over workers that are marked for death.
Rename destroy_worker() to set_working_dying() to better reflect its
effects and relationship with wake_dying_workers().
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
put_unbound_pool() currently passes wq_manager_inactive() as exit condition
to rcuwait_wait_event(), which grabs pool->lock to check for
pool->flags & POOL_MANAGER_ACTIVE
A later patch will require destroy_worker() to be invoked with
wq_pool_attach_mutex held, which needs to be acquired before
pool->lock. A mutex cannot be acquired within rcuwait_wait_event(), as
it could clobber the task state set by rcuwait_wait_event()
Instead, restructure the waiting logic to acquire any necessary lock
outside of rcuwait_wait_event().
Since further work cannot be inserted into unbound pwqs that have reached
->refcnt==0, this is bound to make forward progress as eventually the
worklist will be drained and need_more_worker(pool) will remain false,
preventing any worker from stealing the manager position from us.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A later patch will require a sleepable context in the idle worker timeout
function. Converting worker_pool.idle_timer to a delayed_work gives us just
that, however this would imply turning all idle_timer expiries into
scheduler events (waking up a worker to handle the dwork).
Instead, implement a "custom dwork" where the timer callback does some
extra checks before queuing the associated work.
No change in functionality intended.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Later patches will reuse this code, move it into reusable functions.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When unbind_workers() reads wq_unbound_cpumask to set the affinity of
freshly-unbound kworkers, it only holds wq_pool_attach_mutex. This isn't
sufficient as wq_unbound_cpumask is only protected by wq_pool_mutex.
Make wq_unbound_cpumask protected with wq_pool_attach_mutex and also
remove the need of temporary saved_cpumask.
Fixes: 10a5a651e3 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Reported-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
s390 doesn't use irq_domains, so it has no place to set
IRQ_DOMAIN_FLAG_ISOLATED_MSI. Instead of continuing to abuse the iommu
subsystem to convey this information add a simple define which s390 can
make statically true. The define will cause msi_device_has_isolated() to
return true.
Remove IOMMU_CAP_INTR_REMAP from the s390 iommu driver.
Link: https://lore.kernel.org/r/8-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
What x86 calls "interrupt remapping" is one way to achieve isolated MSI,
make it clear this is talking about isolated MSI, no matter how it is
achieved. This matches the new driver facing API name of
msi_device_has_isolated_msi()
No functional change.
Link: https://lore.kernel.org/r/6-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After converting the users of irq_domain_check_msi_remap() it and the
helpers are no longer needed.
The new version does not require all the #ifdef helpers and inlines
because CONFIG_GENERIC_MSI_IRQ always requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/5-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This will replace irq_domain_check_msi_remap() in following patches.
The new API makes it more clear what "msi_remap" actually means from a
functional perspective instead of identifying an implementation specific
HW feature.
Isolated MSI means that HW modeled by an irq_domain on the path from the
initiating device to the CPU will validate that the MSI message specifies
an interrupt number that the device is authorized to trigger. This must
block devices from triggering interrupts they are not authorized to
trigger. Currently authorization means the MSI vector is one assigned to
the device.
This is interesting for securing VFIO use cases where a rouge MSI (eg
created by abusing a normal PCI MemWr DMA) must not allow the VFIO
userspace to impact outside its security domain, eg userspace triggering
interrupts on kernel drivers, a VM triggering interrupts on the
hypervisor, or a VM triggering interrupts on another VM.
As this is actually modeled as a per-irq_domain property, not a global
platform property, correct the interface to accept the device parameter
and scan through only the part of the irq_domains hierarchy originating
from the source device.
Locate the new code in msi.c as it naturally only works with
CONFIG_GENERIC_MSI_IRQ, which also requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/1-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With the introduction of threaded interrupt handlers, it is virtually
never safe to call disable_irq() from non-premptible context.
Thus: Update the documentation, add an explicit might_sleep() to catch any
offenders. This is more obvious and straight forward than the implicit
might_sleep() check deeper down in the disable_irq() call chain.
Fixes: 3aa551c9b4 ("genirq: add threaded interrupt handler support")
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221216150441.200533-3-manfred@colorfullife.com
The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.
This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230105134403.754986-1-jannh@google.com
The various internal size limit macros have names and/or values that
do not fit well to their current usage.
Rename the macros so that their purpose is clear and, if needed,
provide a more appropriate value. In general, the new macros and
values will lead to less memory usage. The new macros are...
PRINTK_MESSAGE_MAX:
This is the maximum size for a formatted message on a console,
devkmsg, or syslog. It does not matter which format the message has
(normal or extended). It replaces the use of CONSOLE_EXT_LOG_MAX for
console and devkmsg. It replaces the use of CONSOLE_LOG_MAX for
syslog.
Historically, normal messages have been allowed to print up to 1kB,
whereas extended messages have been allowed to print up to 8kB.
However, the difference in lengths of these message types is not
significant and in multi-line records, normal messages are probably
larger. Also, because 1kB is only slightly above the allowed record
size, multi-line normal messages could be easily truncated during
formatting.
This new macro should be significantly larger than the allowed
record size to allow sufficient space for extended or multi-line
prefix text. A value of 2kB should be plenty of space. For normal
messages this represents a doubling of the historically allowed
amount. For extended messages it reduces the excessive 8kB size,
thus reducing memory usage needed for message formatting.
PRINTK_PREFIX_MAX:
This is the maximum size allowed for a record prefix (used by
console and syslog). It replaces PREFIX_MAX. The value is left
unchanged.
PRINTKRB_RECORD_MAX:
This is the maximum size allowed to be reserved for a record in the
ringbuffer. It is used by all readers and writers with the printk
ringbuffer. It replaces LOG_LINE_MAX.
Previously this was set to "1kB - PREFIX_MAX", which makes some
sense if 1kB is the limit for normal message output and prefixes are
enabled. However, with the allowance of larger output and the
existence of multi-line records, the value is rather bizarre.
Round the value up to 1kB.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-9-john.ogness@linutronix.de
Replace the buffers in struct devkmsg_user with a struct
printk_buffers. This reduces the number of buffers to keep track of.
As a side-effect, @text_buf was 8kB large, even though it only
needed to be the max size of a ringbuffer record. By switching to
struct printk_buffers, ~7kB less memory is allocated when opening
/dev/kmsg.
And since struct printk_buffers will be used now, reduce duplicate
code by calling printk_get_next_message() to handle the record
reading and formatting.
Note that since /dev/kmsg never suppresses records based on
loglevel, printk_get_next_message() is extended with an extra
bool argument to specify if suppression is allowed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-8-john.ogness@linutronix.de
Currently "dropped messages" are separately printed immediately
before printing the printk message. Since normal consoles are
now using an output buffer that is much larger than previously,
the "dropped message" could be prepended to the printk message
and then output everything in a single write() call.
Introduce a helper function console_prepend_dropped() to prepend
an existing message with a "dropped message". This simplifies
the code by allowing all message formatting to be handled
together and then only requires a single write() call to output
the full message. And since this helper does not require any
locking, it can be used in the future for other console printing
contexts as well.
Note that console_prepend_dropped() is defined as a NOP for
!CONFIG_PRINTK. Although the function will never be called for
!CONFIG_PRINTK, compiling the function can lead to warnings of
"always true" conditionals due to the size macro values used
in !CONFIG_PRINTK.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-7-john.ogness@linutronix.de
Code for performing the console output is intermixed with code that
is formatting the output for that console. Introduce a new helper
function printk_get_next_message() to handle the reading and
formatting of the printk text. The helper does not require any
locking so that in the future it can be used for other printing
contexts as well.
This also introduces a new struct printk_message to wrap the struct
printk_buffers, adding metadata about its contents. This allows
users of printk_get_next_message() to receive all relevant
information about the message that was read and formatted.
Why is struct printk_message a wrapper struct?
It is intentional that a wrapper struct is introduced instead of
adding the metadata directly to struct printk_buffers. The upcoming
atomic consoles support multiple printing contexts per CPU. This
means that while a CPU is formatting a message, it can be
interrupted and the interrupting context may also format a (possibly
different) message. Since the printk buffers are rather large,
there will only be one struct printk_buffers per CPU and it must be
shared by the possible contexts of that CPU.
If the metadata was part of struct printk_buffers, interrupting
contexts would clobber the metadata being prepared by the
interrupted context. This could be handled by robustifying the
message formatting functions to cope with metadata unexpectedly
changing. However, this would require significant amounts of extra
data copying, also adding significant complexity to the code.
Instead, the metadata can live on the stack of the formatting
context and the message formatting functions do not need to be
concerned about the metadata changing underneath them.
Note that the message formatting functions can handle unexpected
text buffer changes. So it is perfectly OK if a shared text buffer
is clobbered by an interrupting context. The atomic console
implementation will recognize the interruption and avoid printing
the (probably garbage) text buffer.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-6-john.ogness@linutronix.de
Introduce a new struct printk_buffers to contain all the buffers
needed to read and format a printk message for output. Putting the
buffers inside a struct reduces the number of buffer pointers that
need to be tracked. Also, it allows usage of the sizeof() macro for
the buffer sizes, rather than expecting certain sized buffers being
passed in.
Note that since the output buffer for normal consoles is now
CONSOLE_EXT_LOG_MAX instead of CONSOLE_LOG_MAX, multi-line
messages that may have been previously truncated will now be
printed in full. This should be considered a feature and not a bug
since the CONSOLE_LOG_MAX restriction was about limiting static
buffer usage rather than limiting printed text.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-5-john.ogness@linutronix.de
The size limit macros are located further down in printk.c and
behind ifdef conditionals. This complicates their usage for
upcoming changes. Move the macros into internal.h so that they
are still invisible outside of printk, but easily accessible
for printk.
Also, the maximum size of formatted extended messages does not
need to be known by any code outside of printk, so move it to
internal.h as well. And like CONSOLE_LOG_MAX, for !CONFIG_PRINTK
set CONSOLE_EXT_LOG_MAX to 0 to reduce the static memory
footprint.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-2-john.ogness@linutronix.de
Enabling CONFIG_MODULE_ALLOW_BTF_MISMATCH is an indication that BTF
mismatches are expected and module loading should proceed
anyway. Logging with pr_warn() on every one of these "benign"
mismatches creates unnecessary noise when many such modules are
loaded. Instead, handle this case with a single log warning that BTF
info may be unavailable.
Mismatches also result in calls to __btf_verifier_log() via
__btf_verifier_log_type() or btf_verifier_log_member(), adding several
additional lines of logging per mismatched module. Add checks to these
paths to skip logging for module BTF mismatches in the "allow
mismatch" case.
All existing logging behavior is preserved in the default
CONFIG_MODULE_ALLOW_BTF_MISMATCH=n case.
Signed-off-by: Connor O'Brien <connoro@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230107025331.3240536-1-connoro@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix kernel-doc notation warnings:
kernel/cgroup/cpuset.c:1309: warning: Excess function parameter 'cpuset' description in 'update_parent_subparts_cpumask'
kernel/cgroup/cpuset.c:3909: warning: expecting prototype for cpuset_mem_spread_node(). Prototype was for cpuset_spread_node() instead
Also drop a blank line before EXPORT_SYMBOL_GPL() to be consistent
with kernel coding style.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
- fix xtensa allmodconfig build broken by the kcsan test
- drop unused members of struct thread_struct
-----BEGIN PGP SIGNATURE-----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=3G83
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix xtensa allmodconfig build broken by the kcsan test
- drop unused members of struct thread_struct
* tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: drop unused members of struct thread_struct
kcsan: test: don't put the expect array on the stack
It was determined that the do_idr_lock parameter to
bpf_prog_free_id() was not necessary as it should always be true.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230106154400.74211-2-paul@paul-moore.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When changing the ebpf program put() routines to support being called
from within IRQ context the program ID was reset to zero prior to
calling the perf event and audit UNLOAD record generators, which
resulted in problems as the ebpf program ID was bogus (always zero).
This patch addresses this problem by removing an unnecessary call to
bpf_prog_free_id() in __bpf_prog_offload_destroy() and adjusting
__bpf_prog_put() to only call bpf_prog_free_id() after audit and perf
have finished their bpf program unload tasks in
bpf_prog_put_deferred(). For the record, no one can determine, or
remember, why it was necessary to free the program ID, and remove it
from the IDR, prior to executing bpf_prog_put_deferred();
regardless, both Stanislav and Alexei agree that the approach in this
patch should be safe.
It is worth noting that when moving the bpf_prog_free_id() call, the
do_idr_lock parameter was forced to true as the ebpf devs determined
this was the correct as the do_idr_lock should always be true. The
do_idr_lock parameter will be removed in a follow-up patch, but it
was kept here to keep the patch small in an effort to ease any stable
backports.
I also modified the bpf_audit_prog() logic used to associate the
AUDIT_BPF record with other associated records, e.g. @ctx != NULL.
Instead of keying off the operation, it now keys off the execution
context, e.g. '!in_irg && !irqs_disabled()', which is much more
appropriate and should help better connect the UNLOAD operations with
the associated audit state (other audit records).
Cc: stable@vger.kernel.org
Fixes: d809e134be ("bpf: Prepare bpf_prog_put() to be called from irq context.")
Reported-by: Burn Alting <burn.alting@iinet.net.au>
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230106154400.74211-1-paul@paul-moore.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The maximum value of RCU CPU stall-warning timeouts has historically been
five minutes (300 seconds). However, the recently introduced expedited
RCU CPU stall-warning timeout is instead limited to 21 seconds. This
causes problems for CI/fuzzing services such as syzkaller by obscuring
the issue in question with expedited RCU CPU stall-warning timeout splats.
This commit therefore sets the RCU_EXP_CPU_STALL_TIMEOUT Kconfig options
upper bound to 300000 milliseconds, which is 300 seconds (AKA 5 minutes).
[ paulmck: Apply feedback from Hillf Danton. ]
[ paulmck: Apply feedback from Geert Uytterhoeven. ]
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 851a723e45 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") may call kfree() if user_cpus_ptr was previously
set. Unfortunately, some of the callers of do_set_cpus_allowed()
may have pi_lock held when calling it. So the following splats may be
printed especially when running with a PREEMPT_RT kernel:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context
To avoid these problems, kfree_rcu() is used instead. An internal
cpumask_rcuhead union is created for the sole purpose of facilitating
the use of kfree_rcu() to free the cpumask.
Since user_cpus_ptr is not being used in non-SMP configs, the newly
introduced alloc_user_cpus_ptr() helper will return NULL in this case
and sched_setaffinity() is modified to handle this special case.
Fixes: 851a723e45 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221231041120.440785-3-longman@redhat.com
Since commit 07ec77a1d4 ("sched: Allow task CPU affinity to be
restricted on asymmetric systems"), the setting and clearing of
user_cpus_ptr are done under pi_lock for arm64 architecture. However,
dup_user_cpus_ptr() accesses user_cpus_ptr without any lock
protection. Since sched_setaffinity() can be invoked from another
process, the process being modified may be undergoing fork() at
the same time. When racing with the clearing of user_cpus_ptr in
__set_cpus_allowed_ptr_locked(), it can lead to user-after-free and
possibly double-free in arm64 kernel.
Commit 8f9ea86fdf ("sched: Always preserve the user requested
cpumask") fixes this problem as user_cpus_ptr, once set, will never
be cleared in a task's lifetime. However, this bug was re-introduced
in commit 851a723e45 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in
do_set_cpus_allowed(). This time, it will affect all arches.
Fix this bug by always clearing the user_cpus_ptr of the newly
cloned/forked task before the copying process starts and check the
user_cpus_ptr state of the source task under pi_lock.
Note to stable, this patch won't be applicable to stable releases.
Just copy the new dup_user_cpus_ptr() function over.
Fixes: 07ec77a1d4 ("sched: Allow task CPU affinity to be restricted on asymmetric systems")
Fixes: 851a723e45 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Reported-by: David Wang 王标 <wangbiao3@xiaomi.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221231041120.440785-2-longman@redhat.com
In order for the scheduler to be frequency invariant we measure the
ratio between the maximum CPU frequency and the actual CPU frequency.
During long tickless periods of time the calculations that keep track
of that might overflow, in the function scale_freq_tick():
if (check_shl_overflow(acnt, 2*SCHED_CAPACITY_SHIFT, &acnt))
goto error;
eventually forcing the kernel to disable the feature for all CPUs,
and show the warning message:
"Scheduler frequency invariance went wobbly, disabling!".
Let's avoid that by limiting the frequency invariant calculations
to CPUs with regular tick.
Fixes: e2b0d619b4 ("x86, sched: check for counters overflow in frequency invariant accounting")
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Yair Podemsky <ypodemsk@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lore.kernel.org/r/20221130125121.34407-1-ypodemsk@redhat.com
Provide a method to query previously issued registrations.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-2-mclapinski@google.com
The max CPU capacity is the same for all CPUs sharing frequency domain.
There is a way to avoid heavy operations in a loop for each CPU by
leveraging this knowledge. Thus, simplify the looping code in the
sugov_next_freq_shared() and drop heavy multiplications. Instead, use
simple max() to get the highest utilization from these CPUs.
This is useful for platforms with many (4 or 6) little CPUs. We avoid
heavy 2*PD_CPU_NUM multiplications in that loop, which is called billions
of times, since it's not limited by the schedutil time delta filter in
sugov_should_update_freq(). When there was no need to change frequency
the code bailed out, not updating the sg_policy::last_freq_update_time.
Then every visit after delta_ns time longer than the
sg_policy::freq_update_delay_ns goes through and triggers the next
frequency calculation code. Although, if the next frequency, as outcome
of that, would be the same as current frequency, we won't update the
sg_policy::last_freq_update_time and the story will be repeated (in
a very short period, sometimes a few microseconds).
The max CPU capacity must be fetched every time we are called, due to
difficulties during the policy setup, where we are not able to get the
normalized CPU capacity at the right time.
The fetched CPU capacity value is than used in sugov_iowait_apply() to
calculate the right boost. This required a few changes in the local
functions and arguments. The capacity value should hopefully be fetched
once when needed and then passed over CPU registers to those functions.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221208160256.859-2-lukasz.luba@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
ttwu_do_activate() is used for a complete wakeup, in which we will
activate_task() and use ttwu_do_wakeup() to mark the task runnable
and perform wakeup-preemption, also call class->task_woken() callback
and update the rq->idle_stamp.
Since ttwu_runnable() is not a complete wakeup, don't need all those
done in ttwu_do_wakeup(), so we can move those to ttwu_do_activate()
to simplify ttwu_do_wakeup(), making it only mark the task runnable
to be reused in ttwu_runnable() and try_to_wake_up().
This patch should not have any functional changes.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221223103257.4962-2-zhouchengming@bytedance.com
ttwu_runnable() is used as a fast wakeup path when the wakee task
is running on CPU or runnable on RQ, in both cases we can just
set its state to TASK_RUNNING to prevent a sleep.
If the wakee task is on_cpu running, we don't need to update_rq_clock()
or check_preempt_curr().
But if the wakee task is on_rq && !on_cpu (e.g. an IRQ hit before
the task got to schedule() and the task been preempted), we should
check_preempt_curr() to see if it can preempt the current running.
This also removes the class->task_woken() callback from ttwu_runnable(),
which wasn't required per the RT/DL implementations: any required push
operation would have been queued during class->set_next_task() when p
got preempted.
ttwu_runnable() also loses the update to rq->idle_stamp, as by definition
the rq cannot be idle in this scenario.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221223103257.4962-1-zhouchengming@bytedance.com
The show_pwq() function dumps out a pool_workqueue structure's activity,
including the pending work-queue handlers:
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 0: cpus=0 node=0 flags=0x1 nice=0 active=10/256 refcnt=11
in-flight: 7:test_work_func, 64:test_work_func, 249:test_work_func
pending: test_work_func, test_work_func, test_work_func1, test_work_func1, test_work_func1, test_work_func1, test_work_func1
When large systems are facing certain types of hang conditions, it is not
unusual for this "pending" list to contain runs of hundreds of identical
function names. This "wall of text" is difficult to read, and worse yet,
it can be interleaved with other output such as stack traces.
Therefore, make show_pwq() use run-length encoding so that the above
printout instead looks like this:
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 0: cpus=0 node=0 flags=0x1 nice=0 active=10/256 refcnt=11
in-flight: 7:test_work_func, 64:test_work_func, 249:test_work_func
pending: 2*test_work_func, 5*test_work_func1
When no comma would be printed, including the WORK_STRUCT_LINKED case,
a new run is started unconditionally.
This output is more readable, places less stress on the hardware,
firmware, and software on the console-log path, and reduces interference
with other output.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The following kernel panic can be triggered when a task with pid=1 attaches
a prog that attempts to send killing signal to itself, also see [1] for more
details:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 3 PID: 1 Comm: systemd Not tainted 6.1.0-09652-g59fe41b5255f #148
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x100/0x178 lib/dump_stack.c:106
panic+0x2c4/0x60f kernel/panic.c:275
do_exit.cold+0x63/0xe4 kernel/exit.c:789
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x2460/0x2600 kernel/signal.c:2858
arch_do_signal_or_restart+0x78/0x5d0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
So skip task with pid=1 in bpf_send_signal_common() to avoid the panic.
[1] https://lore.kernel.org/bpf/20221222043507.33037-1-sunhao.th@gmail.com
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230106084838.12690-1-sunhao.th@gmail.com
The verifier skips invalid kfunc call in check_kfunc_call(), which
would be captured in fixup_kfunc_call() if such insn is not eliminated
by dead code elimination. However, this can lead to the following
warning in backtrack_insn(), also see [1]:
------------[ cut here ]------------
verifier backtracking bug
WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn
kernel/bpf/verifier.c:2756
__mark_chain_precision kernel/bpf/verifier.c:3065
mark_chain_precision kernel/bpf/verifier.c:3165
adjust_reg_min_max_vals kernel/bpf/verifier.c:10715
check_alu_op kernel/bpf/verifier.c:10928
do_check kernel/bpf/verifier.c:13821 [inline]
do_check_common kernel/bpf/verifier.c:16289
[...]
So make backtracking conservative with this by returning ENOTSUPP.
[1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/
Reported-by: syzbot+4da3ff23081bafe74fc2@syzkaller.appspotmail.com
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230104014709.9375-1-sunhao.th@gmail.com
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
When clocksource_watchdog() detects excessive clocksource skew compared
to the watchdog clocksource, it marks the clocksource under test as
unstable and prints several lines worth of message. But that message
is unclear to anyone unfamiliar with the code:
clocksource: timekeeping watchdog on CPU2: Marking clocksource 'wdtest-ktime' as unstable because the skew is too large:
clocksource: 'kvm-clock' wd_nsec: 400744390 wd_now: 612625c2c wd_last: 5fa7f7c66 mask: ffffffffffffffff
clocksource: 'wdtest-ktime' cs_nsec: 600744034 cs_now: 173081397a292d4f cs_last: 17308139565a8ced mask: ffffffffffffffff
clocksource: 'kvm-clock' (not 'wdtest-ktime') is current clocksource.
Therefore, add the following line near the end of that message:
Clocksource 'wdtest-ktime' skewed 199999644 ns (199 ms) over watchdog 'kvm-clock' interval of 400744390 ns (400 ms)
This new line clearly indicates the amount of skew between the two
clocksources, along with the duration of the time interval over which
the skew occurred, both in nanoseconds and milliseconds.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Time stamps are added to the output in kernels built with
CONFIG_PRINTK_TIME=y, which causes misaligned output. Therefore,
replace pr_cont() with pr_err(), which fixes alignment and gets
rid of a couple of despised pr_cont() calls.
Before:
[ 37.567343] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 37.567839] rcu: 0-....: (1500 ticks this GP) idle=***
[ 37.568270] (t=1501 jiffies g=4717 q=28 ncpus=4)
[ 37.568668] CPU: 0 PID: 313 Comm: test0 Not tainted 6.1.0-rc4 #8
After:
[ 36.762074] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 36.762543] rcu: 0-....: (1499 ticks this GP) idle=***
[ 36.763003] rcu: (t=1500 jiffies g=5097 q=27 ncpus=4)
[ 36.763522] CPU: 0 PID: 313 Comm: test0 Not tainted 6.1.0-rc4 #9
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because RCU CPU stall warnings are driven from the scheduling-clock
interrupt handler, a workload consisting of a very large number of
short-duration hardware interrupts can result in misleading stall-warning
messages. On systems supporting only a single level of interrupts,
that is, where interrupts handlers cannot be interrupted, this can
produce misleading diagnostics. The stack traces will show the
innocent-bystander interrupted task, not the interrupts that are
at the very least exacerbating the stall.
This situation can be improved by displaying the number of interrupts
and the CPU time that they have consumed. Diagnosing other types
of stalls can be eased by also providing the count of softirqs and
the CPU time that they consumed as well as the number of context
switches and the task-level CPU time consumed.
Consider the following output given this change:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (1250 ticks this GP) <omitted>
rcu: hardirqs softirqs csw/system
rcu: number: 624 45 0
rcu: cputime: 69 1 2425 ==> 2500(ms)
This output shows that the number of hard and soft interrupts is small,
there are no context switches, and the system takes up a lot of time. This
indicates that the current task is looping with preemption disabled.
The impact on system performance is negligible because snapshot is
recorded only once for all continuous RCU stalls.
This added debugging information is suppressed by default and can be
enabled by building the kernel with CONFIG_RCU_CPU_STALL_CPUTIME=y or
by booting with rcupdate.rcu_cpu_stall_cputime=1.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a function nr_context_switches_cpu() that returns number of context
switches since boot on the specified CPU. This information will be used
to diagnose RCU CPU stalls.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
During rcutorture shutdown, the rcu_torture_cleanup() function calls
torture_cleanup_begin(), which sets the fullstop global variable to
FULLSTOP_RMMOD. This causes the rcutorture threads for readers and
fakewriters to exit all of their "while" loops and start shutting down.
They then call torture_kthread_stopping(), which in turn waits for
kthread_stop() to be called. However, rcu_torture_cleanup() has
not yet called kthread_stop() on those threads, and before it gets a
chance to do so, multiple instances of torture_kthread_stopping() invoke
schedule_timeout_interruptible(1) in a tight loop. Tracing confirms that
TIMER_SOFTIRQ can then continuously execute timer callbacks. If that
TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that
task might never invoke kthread_stop().
This commit improves this situation by increasing the timeout passed to
schedule_timeout_interruptible() from one jiffy to 1/20th of a second.
This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus
allowing rcu_torture_cleanup() to carry out the needed kthread_stop()
invocations. Testing has shown 100 runs of TREE07 passing reliably,
as oppose to the tens-of-percent failure rates seen beforehand.
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The sparse __acquires() and __releases() annotations provide very
little value. The argument is ignored, so sparse cannot tell the
differences between acquiring one lock and releasing another on the one
hand and acquiring and releasing a given lock on the other. In addition,
lockdep annotations provide much more precision, for but one example,
actually knowing which lock is held.
This commit therefore removes the __acquires() and __releases()
annotations from rcutorture.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rt boosting in locktorture has a factor variable s currently large enough
that boosting only happens once every minute or so. Add a tunable to reduce the
factor so that boosting happens more often, to test paths and arrive at failure
modes earlier. With this change, I can set the factor to like 50 and have the
boosting happens every 10 seconds or so.
Tested with boot parameters:
locktorture.torture_type=mutex_lock
locktorture.onoff_interval=1
locktorture.nwriters_stress=8
locktorture.stutter=0
locktorture.rt_boost=1
locktorture.rt_boost_factor=50
locktorture.nlocks=3
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently RT boosting is only done for rtmutex_lock, however with proxy
execution, we also have the mutex_lock participating in priorities. To
exercise the testing better, add RT boosting to other lock testing types
as well, using a new knob (rt_boost).
Tested with boot parameters:
locktorture.torture_type=mutex_lock
locktorture.onoff_interval=1
locktorture.nwriters_stress=8
locktorture.stutter=0
locktorture.rt_boost=1
locktorture.rt_boost_factor=1
locktorture.nlocks=3
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds three read-side-only tests of three use cases featuring
SLAB_TYPESAFE_BY_RCU: One using per-object reference counting, one using
per-object locking, and one using per-object sequence locking.
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When we're pending, we only care about lock value. The xchg_tail
wouldn't affect the pending state. That means the hardware thread
could stay in a sleep state and leaves the rest execution units'
resources of pipeline to other hardware threads. This situation is
the SMT scenarios in the same core. Not an entering low-power state
situation. Of course, the granularity between cores is "cacheline",
but the granularity between SMT hw threads of the same core could
be "byte" which internal LSU handles. For example, when a hw-thread
yields the resources of the core to other hw-threads, this patch
could help the hw-thread stay in the sleep state and prevent it
from being woken up by other hw-threads xchg_tail.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230105021952.3090070-1-guoren@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Ricardo Ribalda