Needed this for debugging a failing xfstest.
Also change camel case for "treeName" to "tree_name" in tcon struct.
Example trace output (from "trace-cmd record -e smb3_tdis*"):
umount-9718 [006] ..... 5909.780244: smb3_tdis_enter: xid=206 sid=0xcf38894e tid=0x3d0b8cf8 path=\\localhost\test
umount-9718 [007] ..... 5909.780878: smb3_tdis_done: xid=206 sid=0xcf38894e tid=0x3d0b8cf8
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to debug problems with file size being reported incorrectly
temporarily (in this case xfstest generic/584 intermittent failure)
we need to add trace point for the non-compounded code path where
we set the file size (SMB2_set_eof). The new trace point is:
"smb3_set_eof"
Here is sample output from the tracepoint:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
xfs_io-75403 [002] ..... 95219.189835: smb3_set_eof: xid=221 sid=0xeef1cbd2 tid=0x27079ee6 fid=0x52edb58c offset=0x100000
aio-dio-append--75418 [010] ..... 95219.242402: smb3_set_eof: xid=226 sid=0xeef1cbd2 tid=0x27079ee6 fid=0xae89852d offset=0x0
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to debug problems with server potentially
sending us an oplock that we don't recognize (or a race
with close and oplock break) it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_oplock_not_found
Signed-off-by: Steve French <stfrench@microsoft.com>
When trying to debug problems with server sending us a
lease we don't recognize, it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_lease_not_found
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Split the smb3_add_credits tracepoint to make it more obvious when looking
at the logs which line corresponds to what credit change. Also add a
tracepoint for credit overflow when it's being added back.
Note that it might be better to add another field to the tracepoint for
the information rather than splitting it. It would also be useful to store
the MID potentially, though that isn't available when the credits are first
obtained.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: linux-cifs@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
We missed using the variable length string macros in several
tracepoints. Fixed them in this change.
There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.12
Signed-off-by: Steve French <stfrench@microsoft.com>
Introduced a new field conn_id in TCP_Server_Info structure.
This is a non-persistent unique identifier maintained by the client
for a connection to a file server. For this, a global counter named
tcpSesNextId is maintained. On allocating a new TCP_Server_Info,
this counter is incremented and assigned.
Changed the dynamic tracepoints related to reconnects and
crediting to be more informative (with conn_id printed).
Debugging a crediting issue helped me understand the
important things to print here.
Always call dynamic tracepoints outside the scope of spinlocks.
To do this, copy out the credits and in_flight fields of the
server struct before dropping the lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is at least one suspected bug in crediting changes in cifs.ko
which has come up a few times in the discussions and in a customer
case.
This change adds tracepoints to the code which modifies the server
credit values in any way. The goal is to be able to track the changes
to the credit values of the session to be able to catch when there is
a crediting bug.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 crediting is used for flow control, and it can be useful to
trace for problem determination how many credits were acquired
and for which operation.
Here is an example ("trace-cmd record -e *add_credits"):
cifsd-9522 [010] .... 5995.202712: smb3_add_credits:
server=localhost current_mid=0x12 credits=373 credits_to_add=10
cifsd-9522 [010] .... 5995.204040: smb3_add_credits:
server=localhost current_mid=0x15 credits=400 credits_to_add=30
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add dynamic tracepoints for new SMB3.1.1. posix extensions query info level (100)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Makes it easier to debug errors on writeback that happen later,
and are being returned on flush or fsync
For example:
writetest-17829 [002] .... 13583.407859: cifs_flush_err: ino=90 rc=-28
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 change notify is important to allow applications to wait
on directory change events of different types (e.g. adding
and deleting files from others systems). Add worker functions
for this.
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fixes the following KASAN report:
[ 779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180
[ 779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812
[ 779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62
[ 779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
[ 779.044761] Call Trace:
[ 779.044769] dump_stack+0x5b/0x90
[ 779.044775] ? string+0xab/0x180
[ 779.044781] print_address_description+0x6c/0x23c
[ 779.044787] ? string+0xab/0x180
[ 779.044792] ? string+0xab/0x180
[ 779.044797] kasan_report.cold.3+0x1a/0x32
[ 779.044803] ? string+0xab/0x180
[ 779.044809] string+0xab/0x180
[ 779.044816] ? widen_string+0x160/0x160
[ 779.044822] ? vsnprintf+0x5bf/0x7f0
[ 779.044829] vsnprintf+0x4e7/0x7f0
[ 779.044836] ? pointer+0x4a0/0x4a0
[ 779.044841] ? seq_buf_vprintf+0x79/0xc0
[ 779.044848] seq_buf_vprintf+0x62/0xc0
[ 779.044855] trace_seq_printf+0x113/0x210
[ 779.044861] ? trace_seq_puts+0x110/0x110
[ 779.044867] ? trace_raw_output_prep+0xd8/0x110
[ 779.044876] trace_raw_output_smb3_tcon_class+0x9f/0xc0
[ 779.044882] print_trace_line+0x377/0x890
[ 779.044888] ? tracing_buffers_read+0x300/0x300
[ 779.044893] ? ring_buffer_read+0x58/0x70
[ 779.044899] s_show+0x6e/0x140
[ 779.044906] seq_read+0x505/0x6a0
[ 779.044913] vfs_read+0xaf/0x1b0
[ 779.044919] ksys_read+0xa1/0x130
[ 779.044925] ? kernel_write+0xa0/0xa0
[ 779.044931] ? __do_page_fault+0x3d5/0x620
[ 779.044938] do_syscall_64+0x63/0x150
[ 779.044944] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.044949] RIP: 0033:0x7f62c2c2db31
[ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02
02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0
0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48
89
[ 779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31
[ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[ 779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003
[ 779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710
[ 779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000
[ 779.044981] Allocated by task 1257:
[ 779.044987] __kasan_kmalloc.constprop.5+0xc1/0xd0
[ 779.044992] kmem_cache_alloc+0xad/0x1a0
[ 779.044997] getname_flags+0x6c/0x2a0
[ 779.045003] user_path_at_empty+0x1d/0x40
[ 779.045008] do_faccessat+0x12a/0x330
[ 779.045012] do_syscall_64+0x63/0x150
[ 779.045017] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.045019] Freed by task 1257:
[ 779.045023] __kasan_slab_free+0x12e/0x180
[ 779.045029] kmem_cache_free+0x85/0x1b0
[ 779.045034] filename_lookup.part.70+0x176/0x250
[ 779.045039] do_faccessat+0x12a/0x330
[ 779.045043] do_syscall_64+0x63/0x150
[ 779.045048] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.045052] The buggy address belongs to the object at ffff88814f326600
which belongs to the cache names_cache of size 4096
[ 779.045057] The buggy address is located 872 bytes to the right of
4096-byte region [ffff88814f326600, ffff88814f327600)
[ 779.045058] The buggy address belongs to the page:
[ 779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0
[ 779.045067] flags: 0x200000000010200(slab|head)
[ 779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40
[ 779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 779.045083] page dumped because: kasan: bad access detected
[ 779.045085] Memory state around the buggy address:
[ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045099] ^
[ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045109] ==================================================================
[ 779.045110] Disabling lock debugging due to kernel taint
Correctly assign tree name str for smb3_tcon event.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Can be helpful in debugging various xfstests that are currently
skipped or failing due to missing features in our current
implementation of fallocate.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Adds trace points for enter and exit (done vs. error) for:
compounded query and setinfo, hardlink, rename,
mkdir, rmdir, set_eof, delete (unlink)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
To help debug credit starvation problems where we timeout
waiting for server to grant the client credits.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Adds dynamic trace points for the query_info_enter
and query_info_done (no error) case. We only had one
existing trace point related to this which was on query_info
errors. Note that these two new tracepoints are for the
non-compounded query_info paths.
Sample output (from: trace-cmd record -e smb3_query_info*)
ls-24140 [001] .... 27811.866068: smb3_query_info_enter: xid=7 sid=0xd2d00587 tid=0xb5441939 fid=0xcf082bac class=18 type=0x1
ls-24140 [001] .... 27811.867656: smb3_query_info_done: xid=7 sid=0xd2d00587 tid=0xb5441939 fid=0xcf082bac class=18 type=0x1
getcifsacl-24149 [005] .... 27854.759873: smb3_query_info_enter: xid=15 sid=0xd2d00587 tid=0xb5441939 fid=0x99896e72 class=0 type=0x3
getcifsacl-24149 [005] .... 27854.761730: smb3_query_info_done: xid=15 sid=0xd2d00587 tid=0xb5441939 fid=0x99896e72 class=0 type=0x3
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add tracepoint before sending an SMB3 command on the wire (ie add
an smb3_cmd_enter tracepoint). This allows us to look in much
more detail at response times (between request and response).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add dynamic trace point for open_enter (and posix mkdir enter)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Allows tracing begin (not just completion) of read, write
and query_dir which may be helpful in finding slow requests
and other timing information
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Adds two tracepoints - one for query_dir done (no err) and one for query_dir_err
Sanple output:
To start the trace in one window:
trace-cmd record -e smb3_query_dir*
Then in another window after doing an
ls /mnt
View the trace output by:
trace-cmd show
Sample output:
TASK-PID CPU# |||| TIMESTAMP FUNCTION
| | | |||| | |
ls-24869 [007] .... 90695.452009: smb3_query_dir_done: xid=7 sid=0x5027d24d tid=0xb95cf25a fid=0xc41a8c3e offset=0x0 len=0x16
ls-24869 [000] .... 90695.452764: smb3_query_dir_done: xid=8 sid=0x5027d24d tid=0xb95cf25a fid=0xc41a8c3e offset=0x0 len=0x0
ls-24874 [003] .... 90701.506342: smb3_query_dir_done: xid=11 sid=0x5027d24d tid=0xb95cf25a fid=0x33ad3601 offset=0x0 len=0x8
ls-24874 [003] .... 90701.506917: smb3_query_dir_done: xid=12 sid=0x5027d24d tid=0xb95cf25a fid=0x33ad3601 offset=0x0 len=0x0
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Precise and non-ambiguous license information is important. The recently
added aegis header file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.
SPDX-License-Identifier: GPL-2.0
versus
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
Oh well.
Assuming that the SPDX identifier is correct and according to x86/hyper-v
contributions from Microsoft GPL V2 only is the usual license.
Remove the boiler plate as it is wrong and even if correct it is redundant.
Fixes: eccb4422cf ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Be able to log a ftrace message on success and/or failure of
sending a lease break response to the server.
Example output:
TASK-PID CPU# |||| TIMESTAMP FUNCTION
| | | |||| | |
kworker/1:1-5681 [001] .... 11123.530457: smb3_lease_done: sid=0x291e3e0f tid=0x8ba43071 lease_key=0x1852ca0d3ecd9b55847750a86716fde lease_state=0x0
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Add tracepoint to catch potential cases where a pending operation overlapping a
reconnect could fail and incorrectly refund its credits causing the client
to think it has more credits available than the server thinks it does.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If responses take longer than one second from the server,
we can optionally log them to dmesg in current cifs.ko code
(CONFIG_CIFS_STATS2 must be configured and a
/proc/fs/cifs/cifsFYI flag must be set), but can be more useful
to log these via ftrace (tracepoint is smb3_slow_rsp) which
is easier and more granular (still requires CONFIG_CIFS_STATS2
to be configured in the build though).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add tracepoints for reconnecting an smb3 session
Example output (from trace-cmd) with the patch
(showing the session marked for reconnect, the stat failing, and then
the subsequent SMB3 commands after the server comes back up).
The "smb3_reconnect" event is the new one.
cifsd-25993 [000] .... 29635.368265: smb3_reconnect: server=localhost current_mid=0x1e
stat-26200 [001] .... 29638.516403: smb3_enter: cifs_revalidate_dentry_attr: xid=22
stat-26200 [001] .... 29648.723296: smb3_exit_err: cifs_revalidate_dentry_attr: xid=22 rc=-112
kworker/0:1-22830 [000] .... 29653.850947: smb3_cmd_done: sid=0x0 tid=0x0 cmd=0 mid=0
kworker/0:1-22830 [000] .... 29653.851191: smb3_cmd_err: sid=0x8ae4683c tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5
kworker/0:1-22830 [000] .... 29653.855254: smb3_cmd_done: sid=0x8ae4683c tid=0x0 cmd=1 mid=2
kworker/0:1-22830 [000] .... 29653.855482: smb3_cmd_done: sid=0x8ae4683c tid=0x8084f30d cmd=3 mid=3
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
In debugging reconnection problems, want to be able to more easily
trace cases in which the server has marked the SMB3 session
expired or deleted (to distinguish from timeout cases).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Steve French