This is used in the tree-log code and is a holdover from previous
iterations of extent buffer writeback. We can simply use
wait_on_extent_buffer_writeback here, and remove
btrfs_wait_tree_block_writeback completely as it's equivalent (waiting
on page write writeback).
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_clean_tree_block is a misnomer, it's just
clear_extent_buffer_dirty with some extra accounting around it. Rename
this to btrfs_clear_buffer_dirty to make it more clear it belongs with
it's setter, btrfs_mark_buffer_dirty.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're passing in the trans into btrfs_clean_tree_block, we can
easily roll in the handling of the !trans case and replace all
occurrences of
if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags))
clear_extent_buffer_dirty(eb);
with
btrfs_tree_lock(eb);
btrfs_clean_tree_block(eb);
btrfs_tree_unlock(eb);
We need the lock because if we are actually dirty we need to make sure
we aren't racing with anything that's starting writeout currently. This
also makes sure that we're accounting fs_info->dirty_metadata_bytes
appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We check the header generation in the extent buffer against the current
running transaction id to see if it's safe to clear DIRTY on this
buffer. Generally speaking if we're clearing the buffer dirty we're
holding the transaction open, but in the case of cleaning up an aborted
transaction we don't, so we have extra checks in that path to check the
transid. To allow for a future cleanup go ahead and pass in the trans
handle so we don't have to rely on ->running_transaction being set.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently use 'ret' and 'err' to track the return value for
log_dir_items(), which is confusing and likely the cause for previous
bugs where log_dir_items() did not return an error when it should, fixed
in previous patches.
So change this and use only a single variable, 'ret', to track the return
value. This is simpler and makes it similar to most of the existing code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use the value 1 for BTRFS_LOG_FORCE_COMMIT, but that value
has a few inconveniences:
1) If it's ever used by btrfs_log_inode(), or any function down the call
chain, we have to remember to btrfs_set_log_full_commit(), which is
repetitive and has a chance to be forgotten in future use cases.
btrfs_log_inode_parent() only calls btrfs_set_log_full_commit() when
it gets a negative value from btrfs_log_inode();
2) Down the call chain of btrfs_log_inode(), we may have functions that
need to force a log commit, but can return either an error (negative
value), false (0) or true (1). So they are forced to return some
random negative to force a log commit - using BTRFS_LOG_FORCE_COMMIT
would make the intention more clear. Currently the only example is
flush_dir_items_batch().
So turn BTRFS_LOG_FORCE_COMMIT into a negative value. The chosen value
is -(MAX_ERRNO + 1), so that it does not overlap any errno value and makes
it easier to debug.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory, we always set the inode's last_dir_index_offset
to the offset of the last dir index item we found. This is using an extra
field in the log context structure, and it makes more sense to update it
only after we insert dir index items, and we could directly update the
inode's last_dir_index_offset field instead.
So make this simpler by updating the inode's last_dir_index_offset only
when we actually insert dir index keys in the log tree, and getting rid
of the last_dir_item_offset field in the log context structure.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/Y8voyTXdnPDz8xwY@mail.gmail.com/
Reported-by: Hunter Wardlaw <wardlawhunter@gmail.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1207231
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216851
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When syncing a log, if we fail to update a log root in the log root tree,
we are aborting the transaction if the failure was not -ENOSPC. This is
excessive because there is a chance that a transaction commit can succeed,
and therefore avoid to turn the filesystem into RO mode. All we need to be
careful about is to mark the log for a full commit, which we already do,
to make sure no one commits a super block pointing to an outdated log root
tree.
So don't abort the transaction if we fail to update a log root in the log
root tree, and log an error if the failure is not -ENOSPC, so that it does
not go completely unnoticed.
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When syncing the log, if we fail to write log tree extent buffers, we mark
the log for a full commit and abort the transaction. However we don't need
to abort the transaction, all we really need to do is to make sure no one
can commit a superblock pointing to new log tree roots. Just because we
got a failure writing extent buffers for a log tree, it does not mean we
will also fail to do a transaction commit.
One particular case is if due to a bug somewhere, when writing log tree
extent buffers, the tree checker detects some corruption and the writeout
fails because of that. Aborting the transaction can be very disruptive for
a user, specially if the issue happened on a root filesystem. One example
is the scenario in the Link tag below, where an isolated corruption on log
tree leaves was causing transaction aborts when syncing the log.
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging conflicting inodes, if we reach the maximum limit of inodes,
we return BTRFS_LOG_FORCE_COMMIT to force a transaction commit. However
we don't mark the log for full commit (with btrfs_set_log_full_commit()),
which means that once we leave the log transaction and before we commit
the transaction, some other task may sync the log, which is incomplete
as we have not logged all conflicting inodes, leading to some inconsistent
in case that log ends up being replayed.
So also call btrfs_set_log_full_commit() at add_conflicting_inode().
Fixes: e09d94c9e4 ("btrfs: log conflicting inodes without holding log mutex of the initial inode")
CC: stable@vger.kernel.org # 6.1
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sometimes we log a directory without holding its VFS lock, so while we
logging it, dir index entries may be added or removed. This typically
happens when logging a dentry from a parent directory that points to a
new directory, through log_new_dir_dentries(), or when while logging
some other inode we also need to log its parent directories (through
btrfs_log_all_parents()).
This means that while we are at log_dir_items(), we may not find a dir
index key we found before, because it was deleted in the meanwhile, so
a call to btrfs_search_slot() may return 1 (key not found). In that case
we return from log_dir_items() with a success value (the variable 'err'
has a value of 0). This can lead to a few problems, specially in the case
where the variable 'last_offset' has a value of (u64)-1 (and it's
initialized to that when it was declared):
1) By returning from log_dir_items() with success (0) and a value of
(u64)-1 for '*last_offset_ret', we end up not logging any other dir
index keys that follow the missing, just deleted, index key. The
(u64)-1 value makes log_directory_changes() not call log_dir_items()
again;
2) Before returning with success (0), log_dir_items(), will log a dir
index range item covering a range from the last old dentry index
(stored in the variable 'last_old_dentry_offset') to the value of
'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
if the log is persisted and replayed after a power failure, it will
cause deletion of all the directory entries that have an index number
between last_old_dentry_offset + 1 and (u64)-1;
3) We can end up returning from log_dir_items() with
ctx->last_dir_item_offset having a lower value than
inode->last_dir_index_offset, because the former is set to the current
key we are processing at process_dir_items_leaf(), and at the end of
log_directory_changes() we set inode->last_dir_index_offset to the
current value of ctx->last_dir_item_offset. So if for example a
deletion of a lower dir index key happened, we set
ctx->last_dir_item_offset to that index value, then if we return from
log_dir_items() because btrfs_search_slot() returned 1, we end up
returning from log_dir_items() with success (0) and then
log_directory_changes() sets inode->last_dir_index_offset to a lower
value than it had before.
This can result in unpredictable and unexpected behaviour when we
need to log again the directory in the same transaction, and can result
in ending up with a log tree leaf that has duplicated keys, as we do
batch insertions of dir index keys into a log tree.
So fix this by making log_dir_items() move on to the next dir index key
if it does not find the one it was looking for.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory, at log_dir_items(), if we get an error when
attempting to search the subvolume tree for a dir index item, we end up
returning 0 (success) from log_dir_items() because 'err' is left with a
value of 0.
This can lead to a few problems, specially in the case the variable
'last_offset' has a value of (u64)-1 (and it's initialized to that when
it was declared):
1) By returning from log_dir_items() with success (0) and a value of
(u64)-1 for '*last_offset_ret', we end up not logging any other dir
index keys that follow the missing, just deleted, index key. The
(u64)-1 value makes log_directory_changes() not call log_dir_items()
again;
2) Before returning with success (0), log_dir_items(), will log a dir
index range item covering a range from the last old dentry index
(stored in the variable 'last_old_dentry_offset') to the value of
'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
if the log is persisted and replayed after a power failure, it will
cause deletion of all the directory entries that have an index number
between last_old_dentry_offset + 1 and (u64)-1;
3) We can end up returning from log_dir_items() with
ctx->last_dir_item_offset having a lower value than
inode->last_dir_index_offset, because the former is set to the current
key we are processing at process_dir_items_leaf(), and at the end of
log_directory_changes() we set inode->last_dir_index_offset to the
current value of ctx->last_dir_item_offset. So if for example a
deletion of a lower dir index key happened, we set
ctx->last_dir_item_offset to that index value, then if we return from
log_dir_items() because btrfs_search_slot() returned an error, we end up
returning without any error from log_dir_items() and then
log_directory_changes() sets inode->last_dir_index_offset to a lower
value than it had before.
This can result in unpredictable and unexpected behaviour when we
need to log again the directory in the same transaction, and can result
in ending up with a log tree leaf that has duplicated keys, as we do
batch insertions of dir index keys into a log tree.
Fix this by setting 'err' to the value of 'ret' in case
btrfs_search_slot() or btrfs_previous_item() returned an error. That will
result in falling back to a full transaction commit.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Fixes: e02119d5a7 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a new name, we don't expect to fail joining a log transaction
since we know at least one of the inodes was logged before in the current
transaction. However if we fail for some unexpected reason, we end up not
freeing the fscrypt name we previously allocated. So fix that by freeing
the name in case we failed to join a log transaction.
Fixes: ab3c5c18e8 ("btrfs: setup qstr from dentrys using fscrypt helper")
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As of commit 193df62457 ("btrfs: search for last logged dir index if
it's not cached in the inode"), the overwrite_item() function is always
called for a root that is from a fs/subvolume tree. In other words, now
it's only used during log replay to modify a fs/subvolume tree. Therefore
we can remove the logic that checks if we are dealing with a log tree at
overwrite_item().
So remove that logic, replacing it with an assertion and document that if
we ever need to support a log root there, we will need to clone the leaf
from the fs/subvolume tree and then release it before modifying the log
tree, which is needed to avoid a potential deadlock, similar to the one
recently fixed by a patch with the subject:
"btrfs: do not modify log tree while holding a leaf from fs tree locked"
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 193df62457 ("btrfs: search for last logged dir index if
it's not cached in the inode"), there are no more callers of
do_overwrite_item(), except overwrite_item().
Originally both used to be the same function, but were split in
commit 086dcbfa50 ("btrfs: insert items in batches when logging a
directory when possible"), as there was the need to execute all logic
of overwrite_item() but skip the tree search, since in the context of
directory logging we already had a path with a leaf to copy data from.
So unify them again as there is no more need to have them split.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code used by btrfs_submit_bio only interacts with the rest of
volumes.c through __btrfs_map_block (which itself is a more generic
version of two exported helpers) and does not really have anything
to do with volumes.c. Create a new bio.c file and a bio.h header
going along with it for the btrfs_bio-based storage layer, which
will grow even more going forward.
Also update the file with my copyright notice given that a large
part of the moved code was written or rewritten by me.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we have an existing function, btrfs_lookup_csums_range(), to
find all data checksums for a range, it's based on a btrfs_ordered_sum
list.
For the incoming RAID56 data checksum verification at RMW time, we don't
want to waste time by allocating temporary memory.
So this patch will introduce a new helper, btrfs_lookup_csums_bitmap().
It will use bitmap based result, which will be a perfect fit for later
RAID56 usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several different tree block parentness check parameters used
across several helpers:
- level
Mandatory
- transid
Under most cases it's mandatory, but there are several backref cases
which skips this check.
- owner_root
- first_key
Utilized by most top-down tree search routine. Otherwise can be
skipped.
Those four members are not always mandatory checks, and some of them are
the same u64, which means if some arguments got swapped compiler will
not catch it.
Furthermore if we're going to further expand the parentness check, we
need to modify quite some helpers just to add one more parameter.
This patch will concentrate all these members into a structure called
btrfs_tree_parent_check, and pass that structure for the following
helpers:
- btrfs_read_extent_buffer()
- read_tree_block()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into orphan.h to cut down on code in ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into file.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these prototypes out of ctree.h and into file-item.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these prototypes out of ctree.h and into their own header file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update, reformat or reword function comments. This also removes the kdoc
marker so we don't get reports when the function name is missing.
Changes made:
- remove kdoc markers
- reformat the brief description to be a proper sentence
- reword to imperative voice
- align parameter list
- fix typos
Signed-off-by: David Sterba <dsterba@suse.com>
Move all the root-tree.c prototypes to root-tree.h, and then update all
the necessary files to include the new header.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move all the extent tree related prototypes to extent-tree.h out of
ctree.h, and then go include it everywhere needed so everything
compiles.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For directories with encrypted files/filenames, we need to store a flag
indicating this fact. There's no room in other fields, so we'll need to
borrow a bit from dir_type. Since it's now a combination of type and
flags, we rename it to dir_flags to reflect its new usage.
The new flag, FT_ENCRYPTED, indicates a directory containing encrypted
data, which is orthogonal to file type; therefore, add the new
flag, and make conversion from directory type to file type strip the
flag.
As the file types almost never change we can afford to use the bits.
Actual usage will be guarded behind an incompat bit, this patch only
adds the support for later use by fscrypt.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While struct qstr is more natural without fscrypt, since it's provided
by dentries, struct fscrypt_str is provided by the fscrypt handlers
processing dentries, and is thus more natural in the fscrypt world.
Replace all of the struct qstr uses with struct fscrypt_str.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most places where we get a struct qstr, we are doing so from a dentry.
With fscrypt, the dentry's name may be encrypted on-disk, so fscrypt
provides a helper to convert a dentry name to the appropriate disk name
if necessary. Convert each of the dentry name accesses to use
fscrypt_setup_filename(), then convert the resulting fscrypt_name back
to an unencrypted qstr. This does not work for nokey names, but the
specific locations that could spawn nokey names are noted.
At present, since there are no encrypted directories, nothing goes down
the filename encryption paths.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many functions throughout btrfs take name buffer and name length
arguments. Most of these functions at the highest level are usually
called with these arguments extracted from a supplied dentry's name.
But the entire name can be passed instead, making each function a little
more elegant.
Each function whose arguments are currently the name and length
extracted from a dentry is herein converted to instead take a pointer to
the name in the dentry. The couple of calls to these calls without a
struct dentry are converted to create an appropriate qstr to pass in.
Additionally, every function which is only called with a name/len
extracted directly from a qstr is also converted.
This change has positive effect on stack consumption, frame of many
functions is reduced but this will be used in the future for fscrypt
related structures.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass GFP_NOFS, we can drop the parameter and use it
directly.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is specific to the item-accessor code, move it out of ctree.h into
accessor.h/.c and then update the users to include the new header file.
This un-inlines btrfs_init_map_token, however this is only called once
per function so it's not critical to be inlined. This also saves 904
bytes of code on a release build.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several fs wide related helpers in ctree.h. The bulk of these
are the incompat flag test helpers, but there are things such as
btrfs_fs_closing() and the read only helpers that also aren't directly
related to the ctree code. Move these into a fs.h header, which will
serve as the location for file system wide related helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an inode in full mode, or when logging xattrs or when logging
the dir index items of a directory, we are modifying the log tree while
holding a read lock on a leaf from the fs/subvolume tree. This can lead to
a deadlock in rare circumstances, but it is a real possibility, and it was
recently reported by syzbot with the following trace from lockdep:
WARNING: possible circular locking dependency detected
6.1.0-rc5-next-20221116-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.1/16154 is trying to acquire lock:
ffff88807e3084a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256
but task is already holding lock:
ffff88807df33078 (btrfs-log-00){++++}-{3:3}, at: __btrfs_tree_lock+0x32/0x3d0 fs/btrfs/locking.c:197
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-log-00){++++}-{3:3}:
down_read_nested+0x9e/0x450 kernel/locking/rwsem.c:1634
__btrfs_tree_read_lock+0x32/0x350 fs/btrfs/locking.c:135
btrfs_tree_read_lock fs/btrfs/locking.c:141 [inline]
btrfs_read_lock_root_node+0x82/0x3a0 fs/btrfs/locking.c:280
btrfs_search_slot_get_root fs/btrfs/ctree.c:1678 [inline]
btrfs_search_slot+0x3ca/0x2c70 fs/btrfs/ctree.c:1998
btrfs_lookup_csum+0x116/0x3f0 fs/btrfs/file-item.c:209
btrfs_csum_file_blocks+0x40e/0x1370 fs/btrfs/file-item.c:1021
log_csums.isra.0+0x244/0x2d0 fs/btrfs/tree-log.c:4258
copy_items.isra.0+0xbfb/0xed0 fs/btrfs/tree-log.c:4403
copy_inode_items_to_log+0x13d6/0x1d90 fs/btrfs/tree-log.c:5873
btrfs_log_inode+0xb19/0x4680 fs/btrfs/tree-log.c:6495
btrfs_log_inode_parent+0x890/0x2a20 fs/btrfs/tree-log.c:6982
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7083
btrfs_sync_file+0xa41/0x13c0 fs/btrfs/file.c:1921
vfs_fsync_range+0x13e/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2856 [inline]
iomap_dio_complete+0x73a/0x920 fs/iomap/direct-io.c:128
btrfs_direct_write fs/btrfs/file.c:1536 [inline]
btrfs_do_write_iter+0xba2/0x1470 fs/btrfs/file.c:1668
call_write_iter include/linux/fs.h:2160 [inline]
do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
do_iter_write+0x182/0x700 fs/read_write.c:861
vfs_iter_write+0x74/0xa0 fs/read_write.c:902
iter_file_splice_write+0x745/0xc90 fs/splice.c:686
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x114/0x180 fs/splice.c:931
splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886
do_splice_direct+0x1ab/0x280 fs/splice.c:974
do_sendfile+0xb19/0x1270 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x259/0x2c0 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #1 (btrfs-tree-00){++++}-{3:3}:
__lock_release kernel/locking/lockdep.c:5382 [inline]
lock_release+0x371/0x810 kernel/locking/lockdep.c:5688
up_write+0x2a/0x520 kernel/locking/rwsem.c:1614
btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline]
btrfs_unlock_up_safe+0x1e3/0x290 fs/btrfs/locking.c:238
search_leaf fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x265e/0x2c70 fs/btrfs/ctree.c:2074
btrfs_insert_empty_items+0xbd/0x1c0 fs/btrfs/ctree.c:4133
btrfs_insert_delayed_item+0x826/0xfa0 fs/btrfs/delayed-inode.c:746
btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline]
__btrfs_commit_inode_delayed_items fs/btrfs/delayed-inode.c:1111 [inline]
__btrfs_run_delayed_items+0x280/0x590 fs/btrfs/delayed-inode.c:1153
flush_space+0x147/0xe90 fs/btrfs/space-info.c:728
btrfs_async_reclaim_metadata_space+0x541/0xc10 fs/btrfs/space-info.c:1086
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3097 [inline]
check_prevs_add kernel/locking/lockdep.c:3216 [inline]
validate_chain kernel/locking/lockdep.c:3831 [inline]
__lock_acquire+0x2a43/0x56d0 kernel/locking/lockdep.c:5055
lock_acquire kernel/locking/lockdep.c:5668 [inline]
lock_acquire+0x1e3/0x630 kernel/locking/lockdep.c:5633
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x12f/0x1360 kernel/locking/mutex.c:747
__btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256
__btrfs_release_delayed_node fs/btrfs/delayed-inode.c:251 [inline]
btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline]
btrfs_remove_delayed_node+0x52/0x60 fs/btrfs/delayed-inode.c:1285
btrfs_evict_inode+0x511/0xf30 fs/btrfs/inode.c:5554
evict+0x2ed/0x6b0 fs/inode.c:664
dispose_list+0x117/0x1e0 fs/inode.c:697
prune_icache_sb+0xeb/0x150 fs/inode.c:896
super_cache_scan+0x391/0x590 fs/super.c:106
do_shrink_slab+0x464/0xce0 mm/vmscan.c:843
shrink_slab_memcg mm/vmscan.c:912 [inline]
shrink_slab+0x388/0x660 mm/vmscan.c:991
shrink_node_memcgs mm/vmscan.c:6088 [inline]
shrink_node+0x93d/0x1f30 mm/vmscan.c:6117
shrink_zones mm/vmscan.c:6355 [inline]
do_try_to_free_pages+0x3b4/0x17a0 mm/vmscan.c:6417
try_to_free_mem_cgroup_pages+0x3a4/0xa70 mm/vmscan.c:6732
reclaim_high.constprop.0+0x182/0x230 mm/memcontrol.c:2393
mem_cgroup_handle_over_high+0x190/0x520 mm/memcontrol.c:2578
try_charge_memcg+0xe0c/0x12f0 mm/memcontrol.c:2816
try_charge mm/memcontrol.c:2827 [inline]
charge_memcg+0x90/0x3b0 mm/memcontrol.c:6889
__mem_cgroup_charge+0x2b/0x90 mm/memcontrol.c:6910
mem_cgroup_charge include/linux/memcontrol.h:667 [inline]
__filemap_add_folio+0x615/0xf80 mm/filemap.c:852
filemap_add_folio+0xaf/0x1e0 mm/filemap.c:934
__filemap_get_folio+0x389/0xd80 mm/filemap.c:1976
pagecache_get_page+0x2e/0x280 mm/folio-compat.c:104
find_or_create_page include/linux/pagemap.h:612 [inline]
alloc_extent_buffer+0x2b9/0x1580 fs/btrfs/extent_io.c:4588
btrfs_init_new_buffer fs/btrfs/extent-tree.c:4869 [inline]
btrfs_alloc_tree_block+0x2e1/0x1320 fs/btrfs/extent-tree.c:4988
__btrfs_cow_block+0x3b2/0x1420 fs/btrfs/ctree.c:440
btrfs_cow_block+0x2fa/0x950 fs/btrfs/ctree.c:595
btrfs_search_slot+0x11b0/0x2c70 fs/btrfs/ctree.c:2038
btrfs_update_root+0xdb/0x630 fs/btrfs/root-tree.c:137
update_log_root fs/btrfs/tree-log.c:2841 [inline]
btrfs_sync_log+0xbfb/0x2870 fs/btrfs/tree-log.c:3064
btrfs_sync_file+0xdb9/0x13c0 fs/btrfs/file.c:1947
vfs_fsync_range+0x13e/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2856 [inline]
iomap_dio_complete+0x73a/0x920 fs/iomap/direct-io.c:128
btrfs_direct_write fs/btrfs/file.c:1536 [inline]
btrfs_do_write_iter+0xba2/0x1470 fs/btrfs/file.c:1668
call_write_iter include/linux/fs.h:2160 [inline]
do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
do_iter_write+0x182/0x700 fs/read_write.c:861
vfs_iter_write+0x74/0xa0 fs/read_write.c:902
iter_file_splice_write+0x745/0xc90 fs/splice.c:686
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x114/0x180 fs/splice.c:931
splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886
do_splice_direct+0x1ab/0x280 fs/splice.c:974
do_sendfile+0xb19/0x1270 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x259/0x2c0 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> btrfs-tree-00 --> btrfs-log-00
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-log-00);
lock(btrfs-tree-00);
lock(btrfs-log-00);
lock(&delayed_node->mutex);
Holding a read lock on a leaf from a fs/subvolume tree creates a nasty
lock dependency when we are COWing extent buffers for the log tree and we
have two tasks modifying the log tree, with each one in one of the
following 2 scenarios:
1) Modifying the log tree triggers an extent buffer allocation while
holding a write lock on a parent extent buffer from the log tree.
Allocating the pages for an extent buffer, or the extent buffer
struct, can trigger inode eviction and finally the inode eviction
will trigger a release/remove of a delayed node, which requires
taking the delayed node's mutex;
2) Allocating a metadata extent for a log tree can trigger the async
reclaim thread and make us wait for it to release enough space and
unblock our reservation ticket. The reclaim thread can start flushing
delayed items, and that in turn results in the need to lock delayed
node mutexes and in the need to write lock extent buffers of a
subvolume tree - all this while holding a write lock on the parent
extent buffer in the log tree.
So one task in scenario 1) running in parallel with another task in
scenario 2) could lead to a deadlock, one wanting to lock a delayed node
mutex while having a read lock on a leaf from the subvolume, while the
other is holding the delayed node's mutex and wants to write lock the same
subvolume leaf for flushing delayed items.
Fix this by cloning the leaf of the fs/subvolume tree, release/unlock the
fs/subvolume leaf and use the clone leaf instead.
Reported-by: syzbot+9b7c21f486f5e7f8d029@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000ccc93c05edc4d8cf@google.com/
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have NOWAIT specified on our IOCB and we're writing into a
PREALLOC or NOCOW extent then we need to be able to tell
can_nocow_extent that we don't want to wait on any locks or metadata IO.
Fix can_nocow_extent to allow for NOWAIT.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two variants of lock/unlock extent, one set that takes a cached
state, another that does not. This is slightly annoying, and generally
speaking there are only a few places where we don't have a cached state.
Simplify this by making lock_extent/unlock_extent the only variant and
make it take a cached state, then convert all the callers appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During log replay, when adding/replacing inode references, there are two
special cases that have special code for them:
1) When we have an inode with two or more hardlinks in the same directory,
therefore two or more names encoded in the same inode reference item,
and one of the hard links gets renamed to the old name of another hard
link - that is, the index number for a name changes. This was added in
commit 0d836392ca ("Btrfs: fix mount failure after fsync due to
hard link recreation"), and is covered by test case generic/502 from
fstests;
2) When we have several inodes that got renamed to an old name of some
other inode, in a cascading style. The code to deal with this special
case was added in commit 6b5fc433a7 ("Btrfs: fix fsync after
succession of renames of different files"), and is covered by test
cases generic/526 and generic/527 from fstests.
Both cases can be deal with by making sure __add_inode_ref() is always
called by add_inode_ref() for every name encoded in the inode reference
item, and not just for the first name that has a conflict. With such
change we no longer need that special casing for the two cases mentioned
before. So do those changes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory we start by flushing all its delayed items.
That results in adding dir index items to the subvolume btree, for new
dentries, and removing dir index items from the subvolume btree for any
dentries that were deleted.
This makes it straightforward to log a directory simply by iterating over
all the modified subvolume btree leaves, especially when we used to log
both dir index keys and dir item keys (before commit 339d035424
("btrfs: only copy dir index keys when logging a directory") and when we
used to copy old dir index entries for leaves modified in the current
transaction (before commit 732d591a5d ("btrfs: stop copying old dir
items when logging a directory")).
From an efficiency point of view this has a couple of drawbacks:
1) Adds extra latency, due to copying delayed items to the subvolume btree
and deleting dir index items from the btree.
Further if there are other tasks accessing the btree, which is common
(syscalls like creat, mkdir, rename, link, unlink, truncate, reflinks,
etc, finishing an ordered extent, etc), lock contention can cause
further delays, both to the task logging a directory and to the other
tasks accessing the btree;
2) More time spent overall flushing delayed items, if after logging the
directory further changes are done to the directory in the same
transaction.
For example, if we add 10 dentries to a directory, fsync it, add more
10 dentries, fsync it again, then add more 10 dentries and fsync it
again, then we end up inserting 3 batches of 10 items to the subvolume
btree. With the changes from this patch, we flush all the delayed items
to the btree only once - a single batch of 30 items, and outside the
logging code (transaction commit or when delayed items are flushed
asynchronously).
This change simply skips the flushing of delayed items every time we log a
directory. Instead we copy the delayed insertion items directly to the log
tree and delete delayed deletion items directly from the log tree.
Therefore avoiding changing first the subvolume btree and then scanning it
for new items to copy from it to the log tree and detecting deletions
by observing gaps in consecutive dir index keys in subvolume btree leaves.
Running the following tests on a non-debug kernel (Debian's default kernel
config), on a box with a NVMe device, a 12 cores Intel CPU and 64G of ram,
produced the results below.
The results compare a branch without this patch and all the other patches
it depends on versus the same branch with the patchset applied.
The patchset is comprised of the following patches:
btrfs: don't drop dir index range items when logging a directory
btrfs: remove the root argument from log_new_dir_dentries()
btrfs: update stale comment for log_new_dir_dentries()
btrfs: free list element sooner at log_new_dir_dentries()
btrfs: avoid memory allocation at log_new_dir_dentries() for common case
btrfs: remove root argument from btrfs_delayed_item_reserve_metadata()
btrfs: store index number instead of key in struct btrfs_delayed_item
btrfs: remove unused logic when looking up delayed items
btrfs: shrink the size of struct btrfs_delayed_item
btrfs: search for last logged dir index if it's not cached in the inode
btrfs: move need_log_inode() to above log_conflicting_inodes()
btrfs: move log_new_dir_dentries() above btrfs_log_inode()
btrfs: log conflicting inodes without holding log mutex of the initial inode
btrfs: skip logging parent dir when conflicting inode is not a dir
btrfs: use delayed items when logging a directory
Custom test script for testing time spent at btrfs_log_inode():
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
# Total number of files to create in the test directory.
NUM_FILES=10000
# Fsync after creating or renaming N files.
FSYNC_AFTER=100
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
TEST_DIR=$MNT/testdir
mkdir $TEST_DIR
echo "Creating files..."
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $TEST_DIR/file_$i
if (( ($i % $FSYNC_AFTER) == 0 )); then
xfs_io -c "fsync" $TEST_DIR
fi
done
sync
echo "Renaming files..."
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $TEST_DIR/file_$i $TEST_DIR/file_$i.renamed
if (( ($i % $FSYNC_AFTER) == 0 )); then
xfs_io -c "fsync" $TEST_DIR
fi
done
umount $MNT
And using the following bpftrace script to capture the total time that is
spent at btrfs_log_inode():
#!/usr/bin/bpftrace
k:btrfs_log_inode
{
@start_log_inode[tid] = nsecs;
}
kr:btrfs_log_inode
/@start_log_inode[tid]/
{
$dur = (nsecs - @start_log_inode[tid]) / 1000;
@btrfs_log_inode_total_time = sum($dur);
delete(@start_log_inode[tid]);
}
END
{
clear(@start_log_inode);
}
Result before applying patchset:
@btrfs_log_inode_total_time: 622642
Result after applying patchset:
@btrfs_log_inode_total_time: 354134 (-43.1% time spent)
The following dbench script was also used for testing:
#!/bin/bash
NUM_JOBS=$(nproc --all)
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-O no-holes -R free-space-tree"
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT --skip-cleanup -t 120 -S $NUM_JOBS
umount $MNT
Before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 3322265 0.034 21.032
Close 2440562 0.002 0.994
Rename 140664 1.150 269.633
Unlink 670796 1.093 269.678
Deltree 96 5.481 15.510
Mkdir 48 0.004 0.052
Qpathinfo 3010924 0.014 8.127
Qfileinfo 528055 0.001 0.518
Qfsinfo 552113 0.003 0.372
Sfileinfo 270575 0.005 0.688
Find 1164176 0.052 13.931
WriteX 1658537 0.019 5.918
ReadX 5207412 0.003 1.034
LockX 10818 0.003 0.079
UnlockX 10818 0.002 0.313
Flush 232811 1.027 269.735
Throughput 869.867 MB/sec (sync dirs) 12 clients 12 procs max_latency=269.741 ms
After patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4152738 0.029 20.863
Close 3050770 0.002 1.119
Rename 175829 0.871 211.741
Unlink 838447 0.845 211.724
Deltree 120 4.798 14.162
Mkdir 60 0.003 0.005
Qpathinfo 3763807 0.011 4.673
Qfileinfo 660111 0.001 0.400
Qfsinfo 690141 0.003 0.429
Sfileinfo 338260 0.005 0.725
Find 1455273 0.046 6.787
WriteX 2073307 0.017 5.690
ReadX 6509193 0.003 1.171
LockX 13522 0.003 0.077
UnlockX 13522 0.002 0.125
Flush 291044 0.811 211.631
Throughput 1089.27 MB/sec (sync dirs) 12 clients 12 procs max_latency=211.750 ms
(+25.2% throughput, -21.5% max latency)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we find a conflicting inode (an inode that had the same name and
parent directory as the inode we are logging now) that was deleted in the
current transaction, we always end up logging its parent directory.
This is to deal with the case where the conflicting inode corresponds to
a deleted subvolume/snapshot or a directory that had subvolumes/snapshots
(or some subdirectory inside it had subvolumes/snapshots, etc), because
we can't deal with dropping subvolumes/snapshots during log replay. So
if we log the parent directory, and if we are dealing with these special
cases, then we fallback to a transaction commit when logging the parent,
because its last_unlink_trans will match the current transaction (which
gets set and propagated when a subvolume/snapshot is deleted).
This change skips the logging of the parent directory when the conflicting
inode is not a directory (or a subvolume/snapshot). This is ok because in
this case logging the current inode is enough to trigger an unlink of the
conflicting inode during log replay.
So for a case like this:
$ mkdir /mnt/dir
$ echo -n "first foo data" > /mnt/dir/foo
$ sync
$ rm -f /mnt/dir/foo
$ echo -n "second foo data" > /mnt/dir/foo
$ xfs_io -c "fsync" /mnt/dir/foo
We avoid logging parent directory "dir" when logging the new file "foo".
In other cases it avoids falling back to a transaction commit, when the
parent directory has a last_unlink_trans value that matches the current
transaction, due to moving a file from it to some other directory.
This is a case that happens frequently with dbench for example, where a
new file that has the name/parent of another file that was deleted in the
current transaction, is fsynced.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an inode, if we detect the inode has a reference that
conflicts with some other inode that got renamed, we log that other inode
while holding the log mutex of the current inode. We then find out if
there are other inodes that conflict with the first conflicting inode,
and log them while under the log mutex of the original inode. This is
fine because the recursion can only happen once.
For the upcoming work where we directly log delayed items without flushing
them first to the subvolume tree, this recursion adds a lot of complexity
and it's hard to keep lockdep happy about it.
So collect a list of conflicting inodes and then log the inodes after
unlocking the log mutex of the inode we started with.
Also limit the maximum number of conflict inodes we log to 10, to avoid
spending too much time logging (and maybe allocating too many list
elements too), as typically we don't have more than 1 or 2 conflicting
inodes - if we go over the limit, simply fallback to a transaction commit.
It is possible to have a very long list of conflicting inodes to be
intentionally created by a user if he/she creates a very long succession
of renames like this:
(...)
rename E to F
rename D to E
rename C to D
rename B to C
rename A to B
touch A (create a new file named A)
fsync A
If that happened for a sequence of hundreds or thousands of renames, it
could massively slow down the logging and cause other secondary effects
like for example blocking other fsync operations and transaction commits
for a very long time (assuming it wouldn't run into -ENOSPC or -ENOMEM
first). However such cases are very uncommon to happen in practice,
nevertheless it's better to be prepared for them and avoid chaos.
Such long sequence of conflicting inodes could be created before this
change.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The static function log_new_dir_dentries() is currently defined below
btrfs_log_inode(), but in an upcoming patch a new function is introduced
that is called by btrfs_log_inode() and this new function needs to call
log_new_dir_dentries(). So move log_new_dir_dentries() to a location
between btrfs_log_inode() and need_log_inode() (the later is called by
log_new_dir_dentries()).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The static function need_log_inode() is defined below btrfs_log_inode()
and log_conflicting_inodes(), but in the next patches in the series we
will need to call need_log_inode() in a couple new functions that will be
used by btrfs_log_inode(). So move its definition to a location above
log_conflicting_inodes().
Also make its arguments 'const', since they are not supposed to be
modified.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The key offset of the last dir index item that was logged is stored in
the inode's last_dir_index_offset field. However that field is not
persisted in the inode item or elsewhere, so if the inode gets evicted
and reloaded, it gets a value of (u64)-1, so that when we are logging
dir index items we check if they were logged before, to avoid attempts
to insert duplicated keys and fallback to a transaction commit.
Improve on this by searching for the last dir index that was logged when
we start logging a directory if the inode's last_dir_index_offset is not
set (has a value of (u64)-1) and it was logged before. This avoids
checking if each dir index item we find was already logged before, and
simplifies the logging of dir index items (process_dir_items_leaf()).
This will also be needed for an incoming change where we start logging
delayed items directly, without flushing them first.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At log_new_dir_dentries() we always start by allocating a list element
for the starting inode and then do a while loop with the condition being
a list emptiness check.
This however is not needed, we can avoid allocating this initial list
element and then just check for the list emptiness at the end of the
loop's body. So just do that to save one memory allocation from the
kmalloc-32 slab.
This allows for not doing any memory allocation when we don't have any
subdirectory to log, which is a very common case.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At log_new_dir_dentries(), there's no need to keep the current list
element allocated while processing the leaves with directory items for
the current directory, and while logging other inodes. Plus in case we
find a subdirectory, we also end up allocating a new list element while
the current one is still allocated, temporarily using more memory than
necessary.
So free the current list element early on, before processing leaves.
Also make the removal and release of all list elements in case of an
error more simple by eliminating the label and goto, adding an explicit
loop to release all list elements in case an error happens.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment refers to the function log_dir_items() in order to check why
the inodes of new directory entries need to be logged, but the relevant
comments are no longer at log_dir_items(), they were moved to the function
process_dir_items_leaf() in commit eb10d85ee7 ("btrfs: factor out the
copying loop of dir items from log_dir_items()"). So update it with the
current function name.
Also remove references with i_mutex to "VFS lock", since the inode lock
is no longer a mutex since 2016 (it's now a rw semaphore).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in passing a root argument to log_new_dir_dentries()
because it always corresponds to the root of the given inode. So remove
it and extract the root from the given inode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory that was previously logged in the current
transaction, we drop all the range items (BTRFS_DIR_LOG_INDEX_KEY key
type). This is because we will process all leaves in the subvolume's tree
that were changed in the current transaction and then add range items for
covering new dir index items and deleted dir index items, which could
cover now a larger range than before.
We used to fail if we tried to insert a range item key that already
exists, so we dropped all range items to avoid failing. However nowadays,
since commit 750ee45490 ("btrfs: fix assertion failure when logging
directory key range item"), we simply update any range item that already
exists, increasing its range's last dir index if needed. Since the range
covered by a range item can never decrease, due to the fact that dir index
values come from a monotonically increasing counter and are never reused,
we can stop dropping all range items before we start logging a directory.
By not dropping the items we can avoid having occasional tree rebalance
operations.
This will also be needed for an incoming change where we start logging
delayed items directly, without flushing them first.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_insert_file_extent() is only ever used to insert holes, so rename
it and remove the redundant parameters.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During log replay, at add_link(), we may increment the link count of
another inode that has a reference that conflicts with a new reference
for the inode currently being processed.
During log replay, at add_link(), we may drop (unlink) a reference from
some inode in the subvolume tree if that reference conflicts with a new
reference found in the log for the inode we are currently processing.
After the unlink, If the link count has decreased from 1 to 0, then we
increment the link count to prevent the inode from being deleted if it's
evicted by an iput() call, because we may have references to add to that
inode later on (and we will fixup its link count later during log replay).
However incrementing the link count from 0 to 1 triggers a warning:
$ cat fs/inode.c
(...)
void inc_nlink(struct inode *inode)
{
if (unlikely(inode->i_nlink == 0)) {
WARN_ON(!(inode->i_state & I_LINKABLE));
atomic_long_dec(&inode->i_sb->s_remove_count);
}
(...)
The I_LINKABLE flag is only set when creating an O_TMPFILE file, so it's
never set during log replay.
Most of the time, the warning isn't triggered even if we dropped the last
reference of the conflicting inode, and this is because:
1) The conflicting inode was previously marked for fixup, through a call
to link_to_fixup_dir(), which increments the inode's link count;
2) And the last iput() on the inode has not triggered eviction of the
inode, nor was eviction triggered after the iput(). So at add_link(),
even if we unlink the last reference of the inode, its link count ends
up being 1 and not 0.
So this means that if eviction is triggered after link_to_fixup_dir() is
called, at add_link() we will read the inode back from the subvolume tree
and have it with a correct link count, matching the number of references
it has on the subvolume tree. So if when we are at add_link() the inode
has exactly one reference only, its link count is 1, and after the unlink
its link count becomes 0.
So fix this by using set_nlink() instead of inc_nlink(), as the former
accepts a transition from 0 to 1 and it's what we use in other similar
contexts (like at link_to_fixup_dir().
Also make add_inode_ref() use set_nlink() instead of inc_nlink() to
bump the link count from 0 to 1.
The warning is actually harmless, but it may scare users. Josef also ran
into it recently.
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik