This is a set of minor fixes and clean ups in the core and various
drivers. The only core change in behaviour is the I/O retry for
spinup notify, but that shouldn't impact anything other than the
failing case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYOqWWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYBtAQCpqVdl
Axi1SpD6/UuKOgRmboWscoKD8FLHwvLDMRyCRQEAnLu3XdB9HcQrwZOkTG14vrfB
q2XB5cP4XAITxFLN1qo=
=9AO9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers. The major core change is a rework
to drop the status byte handling macros and the old bit shifted
definitions and the rest of the updates are minor fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
H0hkJN/Io7enFs5v3WA=
=zwIa
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered.
When this occurs during error handling, the current policy is to allow
error handling to continue, and the inevitable nexus ha reset will handle
the required reset.
However various steps of error handling need to taken before this happens.
These also involve some level of HW interaction, which will also fail with
various timeouts.
Speed up this process by recording a HW fault bit for an internal abort
timeout - when this is set, just automatically error any HW interaction,
and essentially go straight to clear nexus ha (to reset the controller).
Link: https://lore.kernel.org/r/1623058179-80434-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered. However if a timeout occurs
during SCSI error handling, issuing a controller reset immediately may
conflict with the error handling.
To handle internal abort in these two scenarios, only queue the reset when
not in an error handling function. In the case of a timeout during error
handling, do nothing and rely on the inevitable ha nexus reset to reset the
controller.
Link: https://lore.kernel.org/r/1623058179-80434-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For a clear nexus reset operation, the I_T nexus resets are executed
serially for each device. For devices attached through an expander, this
may take 2s per device; so, in total, could take a long time.
Reduce the total time by running the I_T nexus resets in parallel through
async operations.
Link: https://lore.kernel.org/r/1623058179-80434-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an OOB event is received but the phy still fails to come up, a link
reset will be issued repeatedly at an interval of 20s until the phy comes
up.
Set a limit for link reset issue retries to avoid printing the timeout
message endlessly.
Link: https://lore.kernel.org/r/1623058179-80434-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch prepares for converting SAM status codes into an enum. Without
this patch converting SAM status codes into an enumeration type would
trigger complaints about enum type mismatches for the SAS code.
Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.
Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After commit 6c11dc0604 ("scsi: hisi_sas: Fix IRQ checks") we have the
error codes returned by platform_get_irq() ready for the propagation
upsream in interrupt_init_v1_hw() -- that will fix still broken deferred
probing. Let's propagate the error codes from devm_request_irq() as well
since I don't see the reason to override them with -ENOENT...
Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit df2d8213d9 ("hisi_sas: use platform_get_irq()") failed to take
into account that irq_of_parse_and_map() and platform_get_irq() have a
different way of indicating an error: the former returns 0 and the latter
returns a negative error code. Fix up the IRQ checks!
Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru
Fixes: df2d8213d9 ("hisi_sas: use platform_get_irq()")
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add (pseudo) SAS address for ATA software reset failure log to assist in
debugging.
Link: https://lore.kernel.org/r/1617709711-195853-7-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a channel interrupt occurs without any status bit set, the handler will
return directly. However, if such redundant interrupts are received, it's
better to check what happen, so add logs for this.
Link: https://lore.kernel.org/r/1617709711-195853-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The debugfs snapshot should be executed before the reset occurs to ensure
that the register contents are saved properly.
As such, it is incorrect to queue the debugfs dump when running a reset as
the reset will occur prior to the snapshot work item is handler.
Therefore, directly snapshot registers in the reset work handler.
Link: https://lore.kernel.org/r/1617709711-195853-5-git-send-email-john.garry@huawei.com
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Function sas_unregister_ha() needs to be called to roll back if
hisi_hba->hw->hw_init() fails in function hisi_sas_probe() or
hisi_sas_v3_probe(). Make that change.
Link: https://lore.kernel.org/r/1617709711-195853-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To help debugging efforts, print the device SAS address for v3 hw erroneous
completion log.
Here is an example print:
hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=2193 task=000000002b0c13f8 dev id=17 addr=570fd45f9d17b001
Link: https://lore.kernel.org/r/1617709711-195853-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The debugfs code has been relocated to v3 hw driver, so delete unused
struct hisi_sas_hw function pointers snapshot_{prepare, restore}.
Link: https://lore.kernel.org/r/1617709711-195853-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller provides trace FIFO DFX tool to assist link fault debugging
and link optimization. This tool can be helpful when debugging link faults
without SAS analyzers. Each PHY has an independent trace FIFO interface.
The user can configure the trace FIFO tool of one PHY by using the
following six interfaces:
signal_sel: select signal group applies to different scenarios.
0x0: linkrate negotiation
0x1: Host 12G TX train
0x2: Disk 12G TX train
0x3: SAS PHY CTRL DFX 0
0x4: SAS PHY CTRL DFX 1
0x5: SAS PCS DFX
other: linkrate negotiation
dump_mask: The masked hardware status bit will not be updated.
dump_mode: determines how to dump data after trigger signal is generated.
0x0: dump forever
0x1: dump 32 data after trigger signal is generated
0x2: no more dump after trigger signal is generated
trigger_mode: determines the trigger mode, level or edge.
0x0: dump when trigger signal changed
0x1: dump when trigger signal's level equal to trigger_level
0x2: dump when trigger signal's level different from trigger_level
trigger_level: determines the trigger level.
trigger_msk: mask trigger signal
The user can get 32-byte values from hardware by reading the rd_data.
These values consitute the status record of the hardware at different time
points.
Link: https://lore.kernel.org/r/1611659068-131975-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the controller reset occurs at the same time as driver removal, it may
be possible that the interrupts have been released prior to the host
softreset, and calling pci_irq_vector() there causes a WARN:
WARNING: CPU: 37 PID: 1542 /pci/msi.c:1275 pci_irq_vector+0xc0/0xd0
Call trace:
pci_irq_vector+0xc0/0xd0
disable_host_v3_hw+0x58/0x5b0 [hisi_sas_v3_hw]
soft_reset_v3_hw+0x40/0xc0 [hisi_sas_v3_hw]
hisi_sas_controller_reset+0x150/0x260 [hisi_sas_main]
hisi_sas_rst_work_handler+0x3c/0x58 [hisi_sas_main]
To fix, flush the driver workqueue prior to releasing the interrupts to
ensure any resets have been completed.
Link: https://lore.kernel.org/r/1611659068-131975-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a config option to enable debugfs support by default. And if debugfs
support is enabled by default, dump count default value is increased to 50
as generally users want something bigger than the current default in that
situation.
Link: https://lore.kernel.org/r/1611659068-131975-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that v2 and v3 hw expose their HW queues (and so shost.nr_hw_queues is
set), remove the conditional checks in hisi_sas_task_prep().
This change would affect v1 HW performance (as it does not expose HW
queues), but nobody uses it and support may be dropped soon.
Link: https://lore.kernel.org/r/1611659068-131975-3-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The platform_get_irq() check for -EPROBE_DEFER was to ensure that all the
steps to add the SCSI host are not done and then only to realise that the
probe needs to be deferred.
However, since there is now an earlier check for this in
hisi_sas_interrupt_preinit(), this check is superfluous and may be removed.
Link: https://lore.kernel.org/r/1611659068-131975-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-14-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Below are the context analysis for modified functions:
=> hisi_sas_bytes_dmaed():
Since it is invoked from both process and atomic contexts, let its callers
pass the gfp_t flags:
* hisi_sas_main.c:
------------------
hisi_sas_phyup_work(): workqueue context
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
hisi_sas_controller_reset_done(): has an msleep()
-> hisi_sas_rescan_topology()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
hisi_sas_debug_I_T_nexus_reset(): calls wait_for_completion_timeout()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
* hisi_sas_v1_hw.c:
-------------------
int_abnormal_v1_hw(): irq handler
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)
* hisi_sas_v[23]_hw.c:
----------------------
int_phy_updown_v[23]_hw(): irq handler
-> phy_down_v[23]_hw()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)
=> int_bcast_v1_hw() and phy_bcast_v3_hw():
Both are invoked exclusively from irq handlers. Pass GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210118100955.1761652-12-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LLDDs report events to libsas with .notify_port_event and .notify_phy_event
callbacks.
These callbacks are fixed and so there is no reason why the functions
cannot be called directly, so do that.
This neatens the code slightly, makes it more obvious, and reduces function
pointer usage, which is generally a good thing. Downside is that there are
2x more symbol exports.
[a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables]
Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull in the 5.11 SCSI fixes branch to provide an updated baseline for
megaraid and hisi_sas. Both drivers received core changes in
v5.11-rc3.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge two commits that had dependencies on other 5.11 trees (the block
and the irq trees respectively).
- We reverted a megaraid_sas change in 5.10 due to missing block
layer plumbing. Now that this is in place, reinstate the change.
- The hisi_sas driver had a dependency on a driver core irq change
that went in through Thomas' tree.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As a performance enhancement, make the completion queue interrupts managed.
In addition, in commit bf0beec060 ("blk-mq: drain I/O when all CPUs in a
hctx are offline"), CPU hotplug for MQ devices using managed interrupts is
made safe. So expose HW queues to blk-mq to take advantage of this.
Flag Scsi_host.host_tagset is also set to ensure that the HBA is not sent
more commands than it can handle. However the driver still does not use
request tag for IPTT as there are many HW bugs means that special rules
apply for IPTT allocation.
Link: https://lore.kernel.org/r/1606905417-183214-6-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
For when managed interrupts are used (and shost->nr_hw_queues is set), a
fixed queue - set per-device - is still used for internal I/Os.
If all the CPUs mapped to that queue are offlined, then the completions for
that queue are not serviced and any internal I/Os will time out.
Fix by selecting a queue for internal I/Os from the queue mapped from the
current CPU in this scenario.
This is still not ideal as it does not deal with CPU hotplug for inflight
internal I/Os, and needs proper support from [0].
[0] https://lore.kernel.org/linux-scsi/20200703130122.111448-1-hare@suse.de/T/#m7d77d049b18f33a24ef206af69ebb66d07440556
Link: https://lore.kernel.org/r/1607347855-59091-1-git-send-email-john.garry@huawei.com
Fixes: 8d98416a55 ("scsi: hisi_sas: Switch v3 hw to MQ")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hisi_sas_task_exec() uses preemptible() to see if it's safe to block. This
does not work for CONFIG_PREEMPT_COUNT=n kernels in which preemptible()
always returns 0.
The problem is masked when enabling some of the common Kconfig.debug
options (like CONFIG_DEBUG_ATOMIC_SLEEP), as they implicitly enable the
preemption counter.
In general, driver leaf functions should not make logic decisions based on
the context they're called from. The caller should be the entity
responsible for explicitly indicating context.
Since hisi_sas_task_exec() already has a gfp_t flags parameter, use it as
the explicit context marker.
Link: https://lore.kernel.org/r/20201126132952.2287996-3-bigeasy@linutronix.de
Fixes: 214e702d4b ("scsi: hisi_sas: Adjust task reject period during host reset")
Fixes: 550c0d89d5 ("scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()")
Cc: Xiaofei Tan <tanxiaofei@huawei.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Cc: John Garry <john.garry@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Relocate all the debugfs code for DFX to v3 hw since no other versions
support it.
Link: https://lore.kernel.org/r/1606207594-196362-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix some rollbacks in function hisi_sas_v3_probe() and
interrupt_init_v3_hw().
Link: https://lore.kernel.org/r/1606207594-196362-3-git-send-email-john.garry@huawei.com
Fixes: 8d98416a55 ("scsi: hisi_sas: Switch v3 hw to MQ")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sometimes local functions are called indirectly from the hw driver, which
only makes the code harder to follow. Remove these.
Method .hw_init is only called from platform driver probe, which is not
relevant, so don't set this either.
Link: https://lore.kernel.org/r/1606207594-196362-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Both runtime_suspend_v3_hw() and runtime_resume_v3_hw() do nothing else but
invoke suspend_v3_hw() and resume_v3_hw() respectively. This is the case of
unnecessary function calls. To use those functions for runtime pm as well,
simply use UNIVERSAL_DEV_PM_OPS.
make -j$(nproc) W=1, with CONFIG_PM disabled, throws '-Wunused-function'
warning for runtime_suspend_v3_hw() and runtime_resume_v3_hw(). After
dropping those function definitions, the warning was thrown for
suspend_v3_hw() and resume_v3_hw(). Hence, mark them as '__maybe_unused'.
Link: https://lore.kernel.org/r/20201102164730.324035-15-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drivers using new-framework/generic-framework should not handle standard
power management operations. These operations were performed by legacy
framework through PCI helper functions like pci_save/restore_state(),
pci_set_power_state(), etc.
Drivers should not use them now.
Link: https://lore.kernel.org/r/20201102164730.324035-14-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver calls pci_enable_wake(...., false) in hisi_sas_v3_resume(), and
there is no corresponding pci_enable_wake(...., true) in
hisi_sas_v3_suspend(). Either it should do enable-wake the device in
.suspend() or should not invoke pci_enable_wake() at all.
Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
hisi_sas_v3_resume().
Link: https://lore.kernel.org/r/20201102164730.324035-13-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 8d98416a55 ("scsi: hisi_sas: Switch v3 hw to MQ"), the dispatch
function was changed to choose the delivery queue based on the request tag
HW queue index.
This heavily degrades performance for v2 hw, since the HW queues are not
exposed there, and, as such, HW queue #0 is used for every command.
Revert to previous behaviour for when nr_hw_queues is not set, that being
to choose the HW queue based on target device index.
Link: https://lore.kernel.org/r/1602750425-240341-1-git-send-email-john.garry@huawei.com
Fixes: 8d98416a55 ("scsi: hisi_sas: Switch v3 hw to MQ")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
Currently the PHY state is set according to the state of the PHYs after
reset. This is invalid as the PHYs are already re-initialized.
Set PHY state according to the state before the reset instead of after.
Link: https://lore.kernel.org/r/1601649038-25534-8-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently sas_resume_ha() is called while resuming the controller to wait
for all suspended PHYs to come up and all the libsas events to be
completed.
There is a scenario which will cause task hung: For direct attach with two
disks connected with two PHYs, disable phy0 before suspending the disk on
phy1 and the controller, then enable phy0 and resume the controller, and
task hung occurs as follows:
[ 591.901463] hisi_sas_v3_hw 0000:b4:02.0: resuming from operating state [D0]
[ 593.113525] hisi_sas_v3_hw 0000:b4:02.0: neither _PS0 nor _PR0 is defined
[ 593.120301] hisi_sas_v3_hw 0000:b4:02.0: waiting up to 25 seconds for 1 phy to resume
[ 593.120836] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata)
[ 593.134680] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 link_rate=10(sata)
[ 593.134733] sas: phy-2:0 added to port-2:0, phy_mask:0x1 (5000000000000200)
[ 593.148350] sas: DOING DISCOVERY on port 0, pid:948
[ 593.153227] hisi_sas_v3_hw 0000:b4:02.0: dev[3:5] found
[ 593.159840] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 593.165663] sas: ata7: end_device-2:0: dev error handler
[ 593.165730] sas: ata2: end_device-2:1: dev error handler
[ 593.172532] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy0 phy_state=0x2
[ 593.182570] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy0 down
[ 593.331277] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata)
[ 593.498956] ata7.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, HXT7404Q, max UDMA/133
[ 593.506235] ata7.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 32)
[ 593.514295] ata7.00: configured for UDMA/133
[ 593.518557] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 593.528613] sas: ata7: end_device-2:0: model:SAMSUNG MZ7LH960HAJR-00005
serial:S45NNA0M712225
[ 593.537520] device_link_add 316: dev=2:0:2:0 supplier:2 consumer:0
[ 593.543674] device_link_add 324
[ 593.546801] device_link_add 352
[ 593.549930] device_link_add 406
[ 593.553058] device_link_add 440: dev=2:0:2:0 supplier:2 consumer:0
[ 593.559208] device_link_add 444
[ 593.562335] device_link_add 455
[ 593.565517] scsi 2:0:2:0: Direct-Access ATA SAMSUNG MZ7LH960 404Q PQ: 0
ANSI: 5
[ 620.057464] phy-2:1: resume timeout
[ 738.841445] INFO: task kworker/u256:0:8 blocked for more than 120 seconds.
[ 738.848295] Not tainted 5.8.0-rc1-76154-g0d52b59-dirty #744
[ 738.854361] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 738.862155] kworker/u256:0 D 0 8 2 0x00000028
[ 738.867626] Workqueue: 0000:b4:02.0_event_q sas_port_event_worker
[ 738.873693] Call trace:
[ 738.876133] __switch_to+0xf4/0x148
[ 738.879613] __schedule+0x270/0x5d8
[ 738.883091] schedule+0x78/0x110
[ 738.886307] schedule_timeout+0x1ac/0x280
[ 738.890299] wait_for_completion+0x94/0x138
[ 738.894472] flush_workqueue+0x114/0x438
[ 738.898377] sas_porte_bytes_dmaed+0x400/0x500
[ 738.902801] sas_port_event_worker+0x28/0x40
[ 738.907053] process_one_work+0x1e8/0x360
[ 738.911046] worker_thread+0x44/0x478
[ 738.914698] kthread+0x150/0x158
[ 738.917915] ret_from_fork+0x10/0x1c
[ 738.921534] INFO: task kworker/u256:1:948 blocked for more than 120 seconds.
[ 738.928550] Not tainted 5.8.0-rc1-76154-g0d52b59-dirty #744
[ 738.934614] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 738.942408] kworker/u256:1 D 0 948 2 0x00000028
[ 738.947873] Workqueue: 0000:b4:02.0_disco_q sas_discover_domain
[ 738.953766] Call trace:
[ 738.956203] __switch_to+0xf4/0x148
[ 738.959678] __schedule+0x270/0x5d8
[ 738.963152] schedule+0x78/0x110
[ 738.966368] rpm_resume+0xcc/0x550
[ 738.969757] __pm_runtime_resume+0x3c/0x88
[ 738.973836] rpm_get_suppliers+0x50/0x148
[ 738.977829] __pm_runtime_set_status+0x124/0x2f0
[ 738.982427] scsi_sysfs_add_sdev+0x1a0/0x2a8
[ 738.986679] scsi_probe_and_add_lun+0x888/0xab0
[ 738.991190] __scsi_scan_target+0xec/0x520
[ 738.995268] scsi_scan_target+0x11c/0x128
[ 738.999261] sas_rphy_add+0x15c/0x1e8
[ 739.002907] sas_probe_devices+0xe4/0x150
[ 739.006899] sas_discover_domain+0x33c/0x588
[ 739.011150] process_one_work+0x1e8/0x360
[ 739.015143] worker_thread+0x44/0x478
[ 739.018789] kthread+0x150/0x158
[ 739.022003] ret_from_fork+0x10/0x1c
...
If an extra phy0 up happens during resume of the SAS controller, it will
emit a new libsas event (event PORTE_BYTES_DMAED and event
DISCE_DISCOVER_DOMAIN). We will call function scsi_sysfs_add_sdev() in
event DISCE_DISCOVER_DOMAIN, which will call __pm_runtime_set_status() to
resume supplier (host controller). For runtime PM core, if device is in the
resuming state, the later resume request of the device will wait for
previous resume request to complete synchronously. At that point in time
the state of the controller is still resuming as it waits for all libsas
events to be completed, while libsas event DISCE_DISCOVER_DOMAIN is blocked
as the state of the controller is resuming which causes a deadlock.
To avoid the issue, filter out new PHY up events while the controller is
suspended.
Link: https://lore.kernel.org/r/1601649038-25534-7-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Runtime PM of SCSI devices is already supported in SCSI layer, we can
suspend/resume every SCSI device separately. But if there is no link
between hisi_hba and SCSI devices or SCSI targets it will cause issues if
the controller is suspended while SCSI devices are still resuming. Only
when all the SCSI devices under the controller are suspended, the
controller can be suspended. Add the device link between SCSI devices
and the controller.
Link: https://lore.kernel.org/r/1601649038-25534-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To support system suspend/resume or runtime suspend/resume, need to use the
function pci_set_power_state() to change the power state which requires at
least method _PS0 or _PR0 be filled by platform for v3 hw. So check whether
the method is supported, if not, print a warning.
A Kconfig dependency is added as there is no stub for
acpi_device_power_manageable().
Link: https://lore.kernel.org/r/1601649038-25534-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For v3 hw we will add support for runtime PM which is only supported in new
framework. Legacy PM support and new framework are not allowed to be used
together. Switch to new framework to support suspend and resume.
Link: https://lore.kernel.org/r/1601649038-25534-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A call trace is observed when running function level reset with online CPUs
less than 16 and MSI auto-affinity enabled.
[16538.348038] Call trace:
[16538.348422] pci_irq_vector+0x98/0xc0
[16538.348947] disable_host_v3_hw+0x8c/0x288 [hisi_sas_v3_hw]
[16538.349706] hisi_sas_reset_prepare_v3_hw+0x60/0x88 [hisi_sas_v3_hw]
[16538.350631] pci_dev_save_and_disable+0x38/0x68
[16538.351290] pci_reset_function+0x44/0x88
[16538.351846] reset_store+0x6c/0xb8
[16538.352429] dev_attr_store+0x44/0x60
[16538.353035] sysfs_kf_write+0x58/0x80
[16538.353558] kernfs_fop_write+0x140/0x230
[16538.354175] __vfs_write+0x48/0x80
[16538.354675] vfs_write+0xb8/0x1d8
[16538.355145] ksys_write+0x74/0xf8
[16538.355615] __arm64_sys_write+0x24/0x30
[16538.356240] el0_svc_common.constprop.4+0x80/0x1f0
[16538.356905] do_el0_svc+0x2c/0x38
[16538.357408] el0_svc+0x14/0x40
[16538.357848] el0_sync_handler+0xbc/0x2ec
[16538.358388] el0_sync+0x140/0x180
The reason is that if we use pci_alloc_irq_vectors_affinity() to allocate
IRQs, the number of CQ IRQs can only be less than or equal to the number of
online CPUs, but we use hisi_hba->queue_count (always 16) to iterate during
interrupt_disable_v3_hw().
Use hisi_hba->cq_nvecs to replace hisi_hba->queue_count to avoid
synchronize IRQ on a CPU which does not exist.
Link: https://lore.kernel.org/r/1601649038-25534-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the block layer provides a shared tag, we can switch the driver
to expose all HW queues.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds