As in future our machine driver supports multiple codecs
So changing naming convention of snd_soc_card struct and its fields.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-2-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for voice and BT calls, along with standard
audio output via the speaker, earpiece, headphone jack, HDMI, and
any accessories compatible with Midas boards. This patch also supports
headphone/headset detection and headsets with inline buttons.
[m.szyprowski: adaptation to v5.1+ kernels (DAI links initialization)]
[s.nawrocki: removal of the clk API calls for CODEC MCLK, the jack data
structure moved to struct midas_priv, coding style and typo fixes,
conversion to new cpu/codec/dai-node binding]
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200728131111.14334-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds documentation of DT biding for the Midas sound complex.
Partially based on the *txt version by Simon Shields <simon@lineageos.org>.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200728131111.14334-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset the device before programming the registers or all programming
will be lost as the device resets registers to default settings.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200730142419.28205-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header was updated to align with the data sheet to start the GPO_CFG
at GPO_CFG0. The code was not updated to the change and therefore the
GPO_CFG0 register was not written to.
Fixes: 6617cff6a0 ("ASoC: tlv320adcx140: Add GPO configuration and drive output config")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200730142419.28205-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add General Purpose Output (GPO) configuration and driver output
configuration. The GPOs can be configured as a GPO, IRQ, SDOUT or a
PDMCLK output. In addition the output drive can be configured with
various configurations.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728160833.24130-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add properties for configuring the General Purpose Outputs (GPO). The
GPOs. There are 2 settings for each GPO, configuration and the output drive
type.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728160833.24130-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix white space issues and remove else case where it was not needed.
Convert "static const char *" to "static const char * const"
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728164339.16841-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revert 5b235b5522 ("ASoC: dt-bindings: ak4613: switch to yaml base
Documentation") for the time being since it depends on other conversions.
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This set of patches is required for facilitating system S0ix
entry when the DSP is in D0I3. This first patch adds the missing
CORB/RIRB DMA stop and restart to the suspend/resume sequence along
with powering up/down the links. The second patch ensures that the
FW traces are disabled when the system enters S0ix with the DSP in D0I3.
Marcin Rajwa (2):
ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry
ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3
sound/soc/sof/intel/hda-dsp.c | 48 ++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 4 deletions(-)
--
2.25.1
Update the shutdown GPIO property to be shutdown from shut-down.
Fixes: c173dba44c ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200723160838.9738-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch converts Everest Semiconductor ES8316 low power audio
CODEC binding to DT schema.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200724155933.1040501-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
We should always disable DMA trace on S0Ix. When staying at S0-D0I3,
we should enable DMA trace while both DMA Trace debug is enabled and
hda_enable_trace_D0I3_S0 is set. This commit corrects the existed
logic errors about that.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the suspend & resume procedure to allow entry into the
low power states with some streams being active as a wake source - wake on
voice is a perfect example. The current implementation does not stop
the CORB/RIRB DMA and does not power down the HDA links. With firmware's
help, the platform has been able to still enter s0ix state on older
platforms, but the sequence is still incorrect, and the additional
driver actions are needed to ensure correct s0ix behaviour.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Right now the direction of a DAI has to be specified as a literal
number in the device tree, e.g.:
dai@0 {
reg = <0>;
direction = <2>;
};
but this does not make it immediately clear that this is a
playback/RX-only DAI.
Actually, q6asm-dai.c has useful defines for this. Move them to the
dt-bindings header to allow using them in the dts(i) files.
The example above then becomes:
dai@0 {
reg = <0>;
direction = <Q6ASM_DAI_RX>;
};
which is immediately recognizable as playback/RX-only DAI.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
PME_EN state needs to restored to the value set by fmw.
For the devices which are not using I2S wake event which gets
enabled by PME_EN bit, keeping PME_EN enabled burns considerable amount
of power as it blocks low power state.
For the devices using I2S wake event, PME_EN gets enabled in fmw and the
state should be maintained after ACP Power On.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200724195600.11798-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tuxtydcz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v9i9yddc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
runtime_usage of sound card has been observed to grow without bound.
For example:
$ cat /sys/devices/platform/sound/power/runtime_usage
46
$ sox -n -t s16 -r 48000 -c 2 - synth 1 sine 440 vol 0.1 | \
aplay -q -D hw:0,0 -f S16_LE -r 48000 -c 2
$ cat /sys/devices/platform/sound/power/runtime_usage
52
Commit 4e872a4682 ("ASoC: dapm: Don't force card bias level to be
updated") stops to force update bias_level on card. If card doesn't
provide set_bias_level callback, the snd_soc_dapm_set_bias_level()
is equivalent to NOP for card device.
As a result, dapm_pre_sequence_async() doesn't change the bias_level of
card device correctly. Thus, pm_runtime_get_sync() would be called in
dapm_pre_sequence_async() without symmetric pm_runtime_put() in
dapm_post_sequence_async().
Don't call pm_runtime_* on card device.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200724070731.451377-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment we have two separate functions to parse the sound card
properties from the device tree: qcom_snd_parse_of() for DPCM and
apq8016_sbc_parse_of() without DPCM. These functions are almost identical
except for a few minor differences.
This patch set extends qcom_snd_parse_of() to handle links without DPCM,
so that we can use one common function for all (qcom) machine drivers.
Stephan Gerhold (7):
ASoC: qcom: Use devm for resource management
ASoC: qcom: common: Use snd_soc_dai_link_set_capabilities()
ASoC: q6afe: Remove unused q6afe_is_rx_port() function
ASoC: qcom: common: Support parsing links without DPCM
ASoC: qcom: common: Parse properties with "qcom," prefix
ASoC: qcom: apq8016_sbc: Use qcom_snd_parse_of()
ASoC: qcom: common: Avoid printing errors for -EPROBE_DEFER
sound/soc/qcom/Kconfig | 1 +
sound/soc/qcom/apq8016_sbc.c | 120 ++++-------------------------------
sound/soc/qcom/apq8096.c | 28 +-------
sound/soc/qcom/common.c | 58 ++++++++++-------
sound/soc/qcom/qdsp6/q6afe.c | 8 ---
sound/soc/qcom/qdsp6/q6afe.h | 1 -
sound/soc/qcom/sdm845.c | 40 ++----------
7 files changed, 59 insertions(+), 197 deletions(-)
--
2.27.0
Modify dsm_init sequence and dsm param bin check condition.
- Move dsm_init() to after amp init setting to
make sure dsm init is last setting.
- dsm param bin check condition changed for extended register setting.
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200724060149.19261-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit e2329eeba4 ("ASoC: soc-component: add soc_component_err()")
every error different for ENOTSUPP or EPROBE_DEFER will log an error.
However, as explained in snd_soc_get_dai_name(), this callback may error
to indicate that the DAI is not matched by the component tested. If the
device provides other components, those may still match. Logging an error
in this case is misleading.
Don't use soc_component_ret() in snd_soc_component_of_xlate_dai_name()
to avoid spamming the log.
Fixes: e2329eeba4 ("ASoC: soc-component: add soc_component_err()")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200723142020.1338740-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom_snd_parse_of() tends to produce lots of error messages during bootup:
MultiMedia1: error getting cpu dai name
This happens because the DAIs are not probed until the ADSP remoteproc
has booted, which takes a while. Until it is ready, snd_soc_of_get_dai_name()
returns -EDEFER_PROBE to retry probing later. This is perfectly normal,
so cleanup the kernel log a bit by not printing in case of -EPROBE_DEFER.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-8-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have updated qcom_snd_parse_of() to handle the device
tree bindings used for apq8016_sbc, update the apq8016_sbc driver
to use the common function and remove the duplicated code.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-7-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The apq8016_sbc device tree binding uses a "qcom," vendor prefix
for all device tree properties, while qcom_snd_parse_of() uses the
same properties without a prefix.
In the future it would be nice to make this consistent, however,
for backwards compatibility we need to parse both names to allow
apq8016_sbc to use the common qcom_snd_parse_of() function.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-6-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
So far qcom_snd_parse_of() was only used to parse the device tree
for boards using the QDSP6 driver together with DPCM. apq8016_sbc
uses an almost identical version (apq8016_sbc_parse_of()) which
parses links without DPCM.
Given the similarity of the two functions it is useful to combine
these two. To allow using qcom_snd_parse_of() in apq8016_sbc we
need to support parsing links without DPCM as well.
This is pretty simple: A DPCM link in the device tree is defined using:
- DPCM frontend: "cpu"
- DPCM backend: "cpu", "platform" and "codec"
... while a link without DPCM has "cpu" and "codec" (but no "platform").
Add a few more if conditions to handle links without DPCM correctly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 4a95737440 ("ASoc: q6afe: add support to get
port direction"), since the function is not needed anymore.
q6afe-dai already exposes the possible directions for a DAI through
the DAI capabilities (playback/capture-only DAI). Now we use
snd_soc_dai_link_set_capabilities() to infer the information
directly from the DAI capabilities.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
introduced a call to q6afe_is_rx_port() to set the dpcm_playback/capture
parameters correctly. This is necessary because those parameters are now
validated to match the capabilities of the DAIs. [1]
The disadvantage of introducing the call to q6afe_is_rx_port() is that
it makes the qcom_snd_parse_of() helper dependent on the QDSP6 driver.
When the ADSP is bypassed (e.g. in apq8016-sbc) QDSP6 is not used.
There is a generic solution for this now: The correct direction for the links
is already defined by the DAI capabilities (e.g. rx ports only support playback).
Commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
introduced the snd_soc_dai_link_set_capabilities() function that we can use
to set dpcm_playback/dpcm_capture according to the capabilities of the DAIs.
Use that for both FE/BE DAI links to avoid the dependency on the QDSP6 driver.
[1]: https://lore.kernel.org/alsa-devel/20200616085409.GA110999@gerhold.net/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the machine drivers for newer SoCs a bit by using the
devm_* function calls that automatically release the resources
when the driver is removed or when probing fails.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch converts ROHM BD28623UMV class D speaker amplifier binding
to DT schema.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200722174215.988974-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to support configuring dai fmt through DT, add some properties.
These properiese are same as the properties in simple card.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595302910-19688-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support same propeties as simple card for configuring fmt
from DT.
In order to make this change compatible with old DT, these
properties are optional.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595302910-19688-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ESAI interfaces may share same interrupt line with EDMA on
some platforms (e.g. i.MX8QXP, i.MX8QM).
Add IRQF_SHARED flag to allow sharing the irq among several
devices
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595476808-28927-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Build errors are seen on 32-bit platforms because of a plain 64-by-32
division. For example, following build erros were reported.
"ERROR: modpost: "__udivdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
"ERROR: modpost: "__divdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
This can be fixed by using div_u64() helper from 'math64.h' header.
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595492011-2411-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_J721E_EVM should not select SND_SOC_PCM3168A_I2C when I2C
is not enabled. That causes build errors, so make this driver's
symbol depend on I2C.
WARNING: unmet direct dependencies detected for SND_SOC_PCM3168A_I2C
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && I2C [=n]
Selected by [m]:
- SND_SOC_J721E_EVM [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && (DMA_OMAP [=y] || TI_EDMA [=m] || TI_K3_UDMA [=n] || COMPILE_TEST [=y]) && (ARCH_K3_J721E_SOC [=n] || COMPILE_TEST [=y])
../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: data definition has no type or storage class
module_i2c_driver(pcm3168a_i2c_driver);
^~~~~~~~~~~~~~~~~
../sound/soc/codecs/pcm3168a-i2c.c:59:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: parameter names (without types) in function declaration
../sound/soc/codecs/pcm3168a-i2c.c:49:26: warning: ‘pcm3168a_i2c_driver’ defined but not used [-Wunused-variable]
static struct i2c_driver pcm3168a_i2c_driver = {
^~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
Fixes: 6748d05590 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/e74c690c-c7f8-fd42-e461-4f33571df4ef@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718112403.13709-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Coefficient files now support additional metadata blocks, these
contain machine parsable text strings describing the parameters
contained in the coefficient file.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200723110321.16382-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718111209.11760-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718110857.11520-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Ravulapati Vishnu vardhan rao