The variable 'err' is assgigned to an error message if atomic alloc
failed, while it has no chance to be printed if is_atomic is true.
Here change to print error message too if atomic alloc failed, while
avoid to call dump_stack() if that case.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
This removes the need of local varibale 'chunk', and optimize the code
calling pcpu_alloc_first_chunk() to initialize reserved chunk and
dynamic chunk to make it simpler.
Signed-off-by: Baoquan He <bhe@redhat.com>
[Dennis: reworded first chunk init comment]
Signed-off-by: Dennis Zhou <dennis@kernel.org>
The conditional check "(ai->dyn_size < PERCPU_DYNAMIC_EARLY_SIZE) has
covered the check '(!ai->dyn_size)'.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
In function pcpu_populate_pte there are already variable defined,
it can be reused for later use, here remove duplicated local
variables.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Currently there are two kmem-related helper functions with a confusing
semantics: memcg_kmem_enabled() and mem_cgroup_kmem_disabled().
The problem is that an obvious expectation
memcg_kmem_enabled() == !mem_cgroup_kmem_disabled(),
can be false.
mem_cgroup_kmem_disabled() is similar to mem_cgroup_disabled(): it returns
true only if CONFIG_MEMCG_KMEM is not set or the kmem accounting is
disabled using a boot time kernel option "cgroup.memory=nokmem". It never
changes the value dynamically.
memcg_kmem_enabled() is different: it always returns false until the first
non-root memory cgroup will get online (assuming the kernel memory
accounting is enabled). It's goal is to improve the performance on
systems without the cgroupfs mounted/memory controller enabled or on the
systems with only the root memory cgroup.
To make things more obvious and avoid potential bugs, let's rename
memcg_kmem_enabled() to memcg_kmem_online().
Link: https://lkml.kernel.org/r/20230213192922.1146370-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit b239f7daf5 ("percpu: set PCPU_BITMAP_BLOCK_SIZE to
PAGE_SIZE"), the PCPU_BITMAP_BLOCK_SIZE has been set to page size
fixedly. So the lcm code in pcpu_alloc_first_chunk() doesn't make
sense any more, clean it up.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
In function pcpu_reclaim_populated(), the line of goto jumping is
unnecessary since the label 'end_chunk' is near the end of the for
loop, use break instead.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
When allocating an area from a chunk, pcpu_block_update_hint_alloc()
is called to update chunk metadata, including chunk's and global
nr_empty_pop_pages. However, if the allocation is not atomic, some
blocks may not be populated with pages yet, while we still subtract
the number here. The number of pages will be added back with
pcpu_chunk_populated() when populating pages.
Adding code comment to make that more understandable.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
The lock pcpu_alloc_mutex taking code has been moved to the beginning of
pcpu_allo() if it's non atomic allocation. So the code comment above
above pcpu_create_chunk() callsite need be updated.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
To replace list_empty()/list_first_entry() pair to simplify code.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Since commit 40064aeca3 ("percpu: replace area map allocator with
bitmap"), it is unneeded.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Kmemleak recently added a rbtree to store the objects allocted with
physical address. Those objects can't be freed with kmemleak_free().
According to the comments, percpu allocations are tracked by kmemleak
separately. Kmemleak_free() was used to avoid the unnecessary
tracking. If kmemleak_free() fails, those objects would be scanned by
kmemleak, which is unnecessary but shouldn't lead to other effects.
Use kmemleak_ignore_phys() instead of kmemleak_free() for those
objects.
Link: https://lkml.kernel.org/r/20220705113158.127600-1-patrick.wang.shcn@gmail.com
Fixes: 0c24e06119 ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA")
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to
populate pte, this patch adds a generic pcpu populate pte function,
pcpu_populate_pte(), which is marked __weak and used on most
architectures, but it is overridden on x86, which has its own
implementation.
Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the previous patch, we could add a generic pcpu first chunk
allocate and free function to cleanup the duplicated definations on each
architecture.
Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu
first chunk allocation will call it to alloc memblock on the
corresponding node by it, this is prepare for the next patch.
Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bitmap_for_each_{set,clear}_region() are similar to for_each_bit()
macros in include/linux/find.h, but interface and implementation
of them are different.
This patch adds for_each_bitrange() macros and drops unused
bitmap_*_region() API in sake of unification.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
bitmap_next_clear_region() calls find_next_zero_bit() and find_next_bit()
sequentially to find a range of clear bits. In case of pcpu_is_populated()
there's a chance to return earlier if bitmap has all bits set.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Similar to slab memory allocator, for each accounted percpu object there
is an extra space which is used to store obj_cgroup membership. Charge
it too.
[akpm@linux-foundation.org: fix layout]
Link: https://lkml.kernel.org/r/20211126040606.97836-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().
Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().
Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
This is not needed by any modules, so remove the export.
Link: https://lkml.kernel.org/r/20210722185814.504541-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b239f7daf5 ("percpu: set PCPU_BITMAP_BLOCK_SIZE to PAGE_SIZE")
removed the parameter 'for_alloc', so remove this comment.
Link: https://lkml.kernel.org/r/1630576043-21367-1-git-send-email-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to "percpu: implement partial chunk depopulation",
pcpu_depopulate_chunk() was called only on the destruction path. This
meant the virtual address range was on its way back to vmalloc which
will handle flushing the tlbs for us.
However, with pcpu_reclaim_populated(), we are now calling
pcpu_depopulate_chunk() during the active lifecycle of a chunk.
Therefore, we need to flush the tlb as well otherwise we can end up
accessing the wrong page through an invalid tlb mapping as reported in
[1].
[1] https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/
Fixes: f183324133 ("percpu: implement partial chunk depopulation")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Pull percpu updates from Dennis Zhou:
- percpu chunk depopulation - depopulate backing pages for chunks with
empty pages when we exceed a global threshold without those pages.
This lets us reclaim a portion of memory that would previously be
lost until the full chunk would be freed (possibly never).
- memcg accounting cleanup - previously separate chunks were managed
for normal allocations and __GFP_ACCOUNT allocations. These are now
consolidated which cleans up the code quite a bit.
- a few misc clean ups for clang warnings
* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: optimize locking in pcpu_balance_workfn()
percpu: initialize best_upa variable
percpu: rework memcg accounting
mm, memcg: introduce mem_cgroup_kmem_disabled()
mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init
percpu: make symbol 'pcpu_free_slot' static
percpu: implement partial chunk depopulation
percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1
percpu: factor out pcpu_check_block_hint()
percpu: split __pcpu_balance_workfn()
percpu: fix a comment about the chunks ordering
pcpu_balance_workfn() unconditionally calls pcpu_balance_free(),
pcpu_reclaim_populated(), pcpu_balance_populated() and
pcpu_balance_free() again.
Each call to pcpu_balance_free() and pcpu_reclaim_populated() will
cause at least one acquisition of the pcpu_lock. So even if the
balancing was scheduled because of a failed atomic allocation,
pcpu_lock will be acquired at least 4 times. This obviously
increases the contention on the pcpu_lock.
To optimize the scheme let's grab the pcpu_lock on the upper level
(in pcpu_balance_workfn()) and keep it generally locked for the whole
duration of the scheduled work, but release conditionally to perform
any slow operations like chunk (de)population and creation of new
chunks.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Tom reported this finding from clang 10's static analysis [1].
Due to the way the code is written, it will always see a successful loop
iteration. Instead of setting an initial value, check that it was set
instead with BUG_ON() because 0 units per allocation is bogus.
[1] https://lore.kernel.org/lkml/20210515180817.1751084-1-trix@redhat.com/
Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
The current implementation of the memcg accounting of the percpu
memory is based on the idea of having two separate sets of chunks for
accounted and non-accounted memory. This approach has an advantage
of not wasting any extra memory for memcg data for non-accounted
chunks, however it complicates the code and leads to a higher chunks
number due to a lower chunk utilization.
Instead of having two chunk types it's possible to declare all* chunks
memcg-aware unless the kernel memory accounting is disabled globally
by a boot option. The size of objcg_array is usually small in
comparison to chunks themselves (it obviously depends on the number of
CPUs), so even if some chunk will have no accounted allocations, the
memory waste isn't significant and will likely be compensated by
a higher chunk utilization. Also, with time more and more percpu
allocations will likely become accounted.
* The first chunk is initialized before the memory cgroup subsystem,
so we don't know for sure whether we need to allocate obj_cgroups.
Because it's small, let's make it free for use. Then we don't need
to allocate obj_cgroups for it.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
The sparse tool complains as follows:
mm/percpu.c:138:5: warning:
symbol 'pcpu_free_slot' was not declared. Should it be static?
This symbol is not used outside of percpu.c, so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
From Roman ("percpu: partial chunk depopulation"):
In our [Facebook] production experience the percpu memory allocator is
sometimes struggling with returning the memory to the system. A typical
example is a creation of several thousands memory cgroups (each has
several chunks of the percpu data used for vmstats, vmevents,
ref counters etc). Deletion and complete releasing of these cgroups
doesn't always lead to a shrinkage of the percpu memory, so that
sometimes there are several GB's of memory wasted.
The underlying problem is the fragmentation: to release an underlying
chunk all percpu allocations should be released first. The percpu
allocator tends to top up chunks to improve the utilization. It means
new small-ish allocations (e.g. percpu ref counters) are placed onto
almost filled old-ish chunks, effectively pinning them in memory.
This patchset solves this problem by implementing a partial depopulation
of percpu chunks: chunks with many empty pages are being asynchronously
depopulated and the pages are returned to the system.
To illustrate the problem the following script can be used:
--
cd /sys/fs/cgroup
mkdir percpu_test
echo "+memory" > percpu_test/cgroup.subtree_control
cat /proc/meminfo | grep Percpu
for i in `seq 1 1000`; do
mkdir percpu_test/cg_"${i}"
for j in `seq 1 10`; do
mkdir percpu_test/cg_"${i}"_"${j}"
done
done
cat /proc/meminfo | grep Percpu
for i in `seq 1 1000`; do
for j in `seq 1 10`; do
rmdir percpu_test/cg_"${i}"_"${j}"
done
done
sleep 10
cat /proc/meminfo | grep Percpu
for i in `seq 1 1000`; do
rmdir percpu_test/cg_"${i}"
done
rmdir percpu_test
--
It creates 11000 memory cgroups and removes every 10 out of 11.
It prints the initial size of the percpu memory, the size after
creating all cgroups and the size after deleting most of them.
Results:
vanilla:
./percpu_test.sh
Percpu: 7488 kB
Percpu: 481152 kB
Percpu: 481152 kB
with this patchset applied:
./percpu_test.sh
Percpu: 7488 kB
Percpu: 481408 kB
Percpu: 135552 kB
The total size of the percpu memory was reduced by more than 3.5 times.
This patch:
This patch implements partial depopulation of percpu chunks.
As of now, a chunk can be depopulated only as a part of the final
destruction, if there are no more outstanding allocations. However
to minimize a memory waste it might be useful to depopulate a
partially filed chunk, if a small number of outstanding allocations
prevents the chunk from being fully reclaimed.
This patch implements the following depopulation process: it scans
over the chunk pages, looks for a range of empty and populated pages
and performs the depopulation. To avoid races with new allocations,
the chunk is previously isolated. After the depopulation the chunk is
sidelined to a special list or freed. New allocations prefer using
active chunks to sidelined chunks. If a sidelined chunk is used, it is
reintegrated to the active lists.
The depopulation is scheduled on the free path if the chunk is all of
the following:
1) has more than 1/4 of total pages free and populated
2) the system has enough free percpu pages aside of this chunk
3) isn't the reserved chunk
4) isn't the first chunk
If it's already depopulated but got free populated pages, it's a good
target too. The chunk is moved to a special slot,
pcpu_to_depopulate_slot, chunk->isolated is set, and the balance work
item is scheduled. On isolation, these pages are removed from the
pcpu_nr_empty_pop_pages. It is constantly replaced to the
to_depopulate_slot when it meets these qualifications.
pcpu_reclaim_populated() iterates over the to_depopulate_slot until it
becomes empty. The depopulation is performed in the reverse direction to
keep populated pages close to the beginning. Depopulated chunks are
sidelined to preferentially avoid them for new allocations. When no
active chunk can suffice a new allocation, sidelined chunks are first
checked before creating a new chunk.
Signed-off-by: Roman Gushchin <guro@fb.com>
Co-developed-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Tested-by: Pratik Sampat <psampat@linux.ibm.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
This prepares for adding a to_depopulate list and sidelined list after
the free slot in the set of lists in pcpu_slot.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Factor out the pcpu_check_block_hint() helper, which will be useful
in the future. The new function checks if the allocation can likely
fit within the contig hint.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
__pcpu_balance_workfn() became fairly big and hard to follow, but in
fact it consists of two fully independent parts, responsible for
the destruction of excessive free chunks and population of necessarily
amount of free pages.
In order to simplify the code and prepare for adding of a new
functionality, split it in two functions:
1) pcpu_balance_free,
2) pcpu_balance_populated.
Move the taking/releasing of the pcpu_alloc_mutex to an upper level
to keep the current synchronization in place.
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Since the commit 3e54097beb ("percpu: manage chunks based on
contig_bits instead of free_bytes") chunks are sorted based on the
size of the biggest continuous free area instead of the total number
of free bytes. Update the corresponding comment to reflect this.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
pcpu_build_alloc_info() is an __init function that makes a call to
cpumask_clear_cpu(). With CONFIG_GCOV_PROFILE_ALL enabled, the inline
heuristics are modified and such cpumask_clear_cpu() which is marked
inline doesn't get inlined. Because it works on mask in __initdata,
modpost throws a section mismatch error.
Arnd sent a patch with the flatten attribute as an alternative [2]. I've
added it to compiler_attributes.h.
modpost complaint:
WARNING: modpost: vmlinux.o(.text+0x735425): Section mismatch in reference from the function cpumask_clear_cpu() to the variable .init.data:pcpu_build_alloc_info.mask
The function cpumask_clear_cpu() references
the variable __initdata pcpu_build_alloc_info.mask.
This is often because cpumask_clear_cpu lacks a __initdata
annotation or the annotation of pcpu_build_alloc_info.mask is wrong.
clang output:
mm/percpu.c:2724:5: remark: cpumask_clear_cpu not inlined into pcpu_build_alloc_info because too costly to inline (cost=725, threshold=325) [-Rpass-missed=inline]
[1] https://lore.kernel.org/linux-mm/202012220454.9F6Bkz9q-lkp@intel.com/
[2] https://lore.kernel.org/lkml/CAK8P3a2ZWfNeXKSm8K_SUhhwkor17jFo3xApLXjzfPqX0eUDUA@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
To build group_map[] and group_cnt[], we find out which group
CPUs belong to by comparing the distance of the cpu. However,
this includes cases where comparisons are not required.
This patch uses a bitmap to record CPUs that is not classified in
the group. CPUs that we know which group they belong to should be
cleared from the bitmap. In result, we can reduce the number of
unnecessary comparisons.
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
[Dennis: added cpumask_clear() call and #include cpumask.h.]
Patch series "mm: kmem: kernel memory accounting in an interrupt context".
This patchset implements memcg-based memory accounting of allocations made
from an interrupt context.
Historically, such allocations were passed unaccounted mostly because
charging the memory cgroup of the current process wasn't an option. Also
performance reasons were likely a reason too.
The remote charging API allows to temporarily overwrite the currently
active memory cgroup, so that all memory allocations are accounted towards
some specified memory cgroup instead of the memory cgroup of the current
process.
This patchset extends the remote charging API so that it can be used from
an interrupt context. Then it removes the fence that prevented the
accounting of allocations made from an interrupt context. It also
contains a couple of optimizations/code refactorings.
This patchset doesn't directly enable accounting for any specific
allocations, but prepares the code base for it. The bpf memory accounting
will likely be the first user of it: a typical example is a bpf program
parsing an incoming network packet, which allocates an entry in hashmap
map to store some information.
This patch (of 4):
Currently memcg_kmem_bypass() is called before obtaining the current
memory/obj cgroup using get_mem/obj_cgroup_from_current(). Moving
memcg_kmem_bypass() into get_mem/obj_cgroup_from_current() reduces the
number of call sites and allows further code simplifications.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200827225843.1270629-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variable populated, which is a member of struct pcpu_chunk, is used as a
unit of size of unsigned long.
However, size of populated is miscounted. So, I fix this minor part.
Fixes: 8ab16c43ea ("percpu: change the number of pages marked in the first_chunk pop bitmap")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Sunghyun Jin <mcsmonk@gmail.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Percpu memory can represent a noticeable chunk of the total memory
consumption, especially on big machines with many CPUs. Let's track
percpu memory usage for each memcg and display it in memory.stat.
A percpu allocation is usually scattered over multiple pages (and nodes),
and can be significantly smaller than a page. So let's add a byte-sized
counter on the memcg level: MEMCG_PERCPU_B. Byte-sized vmstat infra
created for slabs can be perfectly reused for percpu case.
[guro@fb.com: v3]
Link: http://lkml.kernel.org/r/20200623184515.4132564-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200608230819.832349-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Percpu memory is becoming more and more widely used by various subsystems,
and the total amount of memory controlled by the percpu allocator can make
a good part of the total memory.
As an example, bpf maps can consume a lot of percpu memory, and they are
created by a user. Also, some cgroup internals (e.g. memory controller
statistics) can be quite large. On a machine with many CPUs and big
number of cgroups they can consume hundreds of megabytes.
So the lack of memcg accounting is creating a breach in the memory
isolation. Similar to the slab memory, percpu memory should be accounted
by default.
To implement the perpcu accounting it's possible to take the slab memory
accounting as a model to follow. Let's introduce two types of percpu
chunks: root and memcg. What makes memcg chunks different is an
additional space allocated to store memcg membership information. If
__GFP_ACCOUNT is passed on allocation, a memcg chunk should be be used.
If it's possible to charge the corresponding size to the target memory
cgroup, allocation is performed, and the memcg ownership data is recorded.
System-wide allocations are performed using root chunks, so there is no
additional memory overhead.
To implement a fast reparenting of percpu memory on memcg removal, we
don't store mem_cgroup pointers directly: instead we use obj_cgroup API,
introduced for slab accounting.
[akpm@linux-foundation.org: fix CONFIG_MEMCG_KMEM=n build errors and warning]
[akpm@linux-foundation.org: move unreachable code, per Roman]
[cuibixuan@huawei.com: mm/percpu: fix 'defined but not used' warning]
Link: http://lkml.kernel.org/r/6d41b939-a741-b521-a7a2-e7296ec16219@huawei.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200623184515.4132564-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: memcg accounting of percpu memory", v3.
This patchset adds percpu memory accounting to memory cgroups. It's based
on the rework of the slab controller and reuses concepts and features
introduced for the per-object slab accounting.
Percpu memory is becoming more and more widely used by various subsystems,
and the total amount of memory controlled by the percpu allocator can make
a good part of the total memory.
As an example, bpf maps can consume a lot of percpu memory, and they are
created by a user. Also, some cgroup internals (e.g. memory controller
statistics) can be quite large. On a machine with many CPUs and big
number of cgroups they can consume hundreds of megabytes.
So the lack of memcg accounting is creating a breach in the memory
isolation. Similar to the slab memory, percpu memory should be accounted
by default.
Percpu allocations by their nature are scattered over multiple pages, so
they can't be tracked on the per-page basis. So the per-object tracking
introduced by the new slab controller is reused.
The patchset implements charging of percpu allocations, adds memcg-level
statistics, enables accounting for percpu allocations made by memory
cgroup internals and provides some basic tests.
To implement the accounting of percpu memory without a significant memory
and performance overhead the following approach is used: all accounted
allocations are placed into a separate percpu chunk (or chunks). These
chunks are similar to default chunks, except that they do have an attached
vector of pointers to obj_cgroup objects, which is big enough to save a
pointer for each allocated object. On the allocation, if the allocation
has to be accounted (__GFP_ACCOUNT is passed, the allocating process
belongs to a non-root memory cgroup, etc), the memory cgroup is getting
charged and if the maximum limit is not exceeded the allocation is
performed using a memcg-aware chunk. Otherwise -ENOMEM is returned or the
allocation is forced over the limit, depending on gfp (as any other kernel
memory allocation). The memory cgroup information is saved in the
obj_cgroup vector at the corresponding offset. On the release time the
memcg information is restored from the vector and the cgroup is getting
uncharged. Unaccounted allocations (at this point the absolute majority
of all percpu allocations) are performed in the old way, so no additional
overhead is expected.
To avoid pinning dying memory cgroups by outstanding allocations,
obj_cgroup API is used instead of directly saving memory cgroup pointers.
obj_cgroup is basically a pointer to a memory cgroup with a standalone
reference counter. The trick is that it can be atomically swapped to
point at the parent cgroup, so that the original memory cgroup can be
released prior to all objects, which has been charged to it. Because all
charges and statistics are fully recursive, it's perfectly correct to
uncharge the parent cgroup instead. This scheme is used in the slab
memory accounting, and percpu memory can just follow the scheme.
This patch (of 5):
To implement accounting of percpu memory we need the information about the
size of freed object. Return it from pcpu_free_area().
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
cC: Michal Koutnýutny@suse.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200623184515.4132564-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200608230819.832349-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200608230819.832349-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Baoquan He