Commit Graph

17 Commits

Author SHA1 Message Date
Mike Frysinger aab2393e2e Blackfin: gpio: add a debounce stub
The GPIO API was extended recently to include debounce functions, but
since the on-chip Blackfin GPIO modules don't support this stuff, make
a stub in the non-GPIOLIB case so drivers build properly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:58 -04:00
Mike Frysinger 812ae98f08 Blackfin: gpio/portmux: clean up whitespace corruption
Random tabs instead of spaces, mixes of the two, and unicode spaces
instead of ascii spaces.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:51 -04:00
Michael Hennerich bb84dbf69b Blackfin: punt Blackfin-specific GPIO wakeup API
This patch removes a custom GPIO wakeup API which allowed GPIOs to act
as wakeup sources, which are not configured as Interrupts.
This API is a leftover from the time before irq_wake was established.
From now on people must use enable_irq_wake(GPIO_IRQx) and the GPIO in
question needs to be configured as Interrupt.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:16 -04:00
Joachim Eastwood 7f4f69f991 Blackfin: GPIO: implement to_irq handler
This makes it possible to support IRQs coming from off-chip GPIO
controllers.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Michael Hennerich 621dd24743 Blackfin: bf538: add support for extended GPIO banks
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system.  Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:05 -05:00
Robin Getz 96f1050d3d Blackfin: mass clean up of copyright/licensing info
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.

It also removes:
 - verbose GPL text(refer to the top level ./COPYING file)
 - file names (you are looking at the file)
 - bug url (it's in the ./MAINTAINERS file)
 - "or later" on GPL-2, when we did not have that right

It also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:26 -04:00
Mike Frysinger 269647dc8f Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x as the defines
are redundant in these cases

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-28 20:32:57 +08:00
Michael Hennerich e1312bfcc2 Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-28 21:18:45 +08:00
Mike Frysinger f556309ea0 Blackfin arch: cleanup bf54x ifdef mess in gpio code
merge more of the bf54x and !bf54x gpio code together to
cut down on #ifdef mess

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Michael Hennerich 983e101605 Blackfin arch: gpio.h split into machine subfolders like already done for BF54x
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang 9570ff4af6 Blackfin arch: Allow a gpio pin be requested both as gpio and irq.
[Mike Frysinger <vapier.adi@gmail.com>:
 - use KERN_NOTICE when using gpios as both irq and non
   rather than KERN_ERR
 - embedded newlines in printk() does not fly]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Bryan Wu 2e8ca59147 Blackfin arch: Use GPIO_BANKSIZE macro to replace const number 16 for GPIO_BANK_NUM macro caculating
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Michael Hennerich a4f0b32c33 Blackfin arch: Convert Blackfin GPIO driver to use common gpiolib/gpiochip infrastructure
- This patch adds support for ARCH_WANT_OPTIONAL_GPIOLIB.
 - It may be changed in future to ARCH_REQUIRE_GPIOLIB.
 - Change GPIO_BANK_NUM use DIV_ROUND_UP( , ) macro

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Bryan Wu 397861cd80 Blackfin arch: fix bug - gpio_bank() macros messed up bank number caculating with positioning a gpio
The whole story:

Before BF51x merged, all the MAX_BLACKFIN_GPIOS are integral multiple of GPIO_BANKSIZE (= 16).
But BF51x provides MAX_BLACKFIN_GPIOS = 40 which includes 3 banks and the 3rd bank has only 8
GPIO pins.

Therefore, gpio_bank() macros is correct when you try to find a GPIO in which bank (GPIO_35 is
in bank 2). But on BF51x gpio_bank(MAX_BLACKFIN_GPIOS) only gives out 2 banks instead of 3
banks for some static array initialization.

This patch add a new macros gpio_bank_n() and GPIO_BANK_NUM to do bank number caculating and
remain the gpio_bank() macros for positioning a gpio in which bank.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Bryan Wu 2f6f4bcdd6 Blackfin arch: add support for Blackfin latest processor family BF51x
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:21 +08:00
Michael Hennerich dc26aec25d Blackfin arch: BF538/9 Linux kernel Support
Add supporing for Blackfin BF538 and BF539 processors.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Bryan Wu 639f657145 Blackfin arch: move include/asm-blackfin header files to arch/blackfin
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-27 10:51:02 +08:00