Modify drivers to perform skcipher IV update using the crypto engine,
instead of performing the operation in SW.
Besides being more efficient, this also fixes IV update for CTR mode.
Output HW S/G table is appended with an entry pointing to the same
IV buffer used as input (which is now mapped BIDIRECTIONAL).
AS (Algorithm State) parameter of the OPERATION command is changed
from INIFINAL to INIT in descriptors used by ctr(aes), cbc(aes).
This is needed since in case FINAL bit is set, HW skips IV updating
in the Context Register for the last data block.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, conversion of SW S/G table into HW S/G layout relies on
nents returned by sg_nents_for_len(sg, len).
However this leaves the possibility of HW S/G referencing more data
then needed: since buffer length in HW S/G entries is filled using
sg_dma_len(sg), the last entry in HW S/G table might have a length
that is bigger than needed for the crypto request.
This way of S/G table conversion is fine, unless after converting a table
more entries have to be appended to the HW S/G table.
In this case, crypto engine would access data from the S/G entry having
the incorrect length, instead of advancing in the S/G table.
This situation doesn't exist, but the upcoming implementation of
IV update for skcipher algorithms needs to add a S/G entry after
req->dst S/G (corresponding to output IV).
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disabled the check and set of 'mem' and 'emi_slow'
clocks, since these are not available for iMX7ULP.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.
This may result in errors like
alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
alg: aead: Failed to load transform for gcm(aes): -2
on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.
Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.
Fixes: 854b06f768 ("crypto: caam - properly set IV after {en,de}crypt")
Cc: Horia Geanta <horia.geanta@nxp.com>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For rsa and pkcs1pad, CAAM expects an input of modulus size.
For this we strip the leading zeros in case the size is more than modulus.
This commit avoids modifying the crypto request while stripping zeros from
input, to comply with the crypto API requirement. This is done by adding
a fixup input pointer and length.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The problem is with the input data size sent to CAAM for encrypt/decrypt.
Pkcs1pad is failing due to pkcs1 padding done in SW starting with0x01
instead of 0x00 0x01.
CAAM expects an input of modulus size. For this we strip the leading
zeros in case the size is more than modulus or pad the input with zeros
until the modulus size is reached.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam_dump_sg() is only compiled in when DEBUG is defined, hence the
messages are debug messages. Remove the @level argument from
caam_dump_sg() and print all messages at debug level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver used to put its debug messages inside #ifdef DEBUG and
then prints the messages at KERN_ERR level. Replace this with proper
functions printing at KERN_DEBUG level. The #ifdef DEBUG gets
unnecessary when the right functions are used.
This replaces:
- print_hex_dump(KERN_ERR ...) inside #ifdef DEBUG with
print_hex_dump_debug(...)
- dev_err() inside #ifdef DEBUG with dev_dbg()
- printk(KERN_ERR ...) inside #ifdef DEBUG with dev_dbg()
Some parts of the driver use these functions already, so it is only
consequent to use the debug function consistently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver defines its own debug() macro, but it is unused. Remove
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since eaed71a44a ("crypto: caam - add ecb(*) support") the IV can be
NULL, so only dump it when it's non NULL as designated by the ivsize
variable.
Fixes: eaed71a44a ("crypto: caam - add ecb(*) support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For encryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV still contained the input IV while printing instead
of the output IV as intended.
For decryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV dump was correct.
Do the hex dumps consistenly after the buffers have been unmapped and
in case of IV copied to their final destination.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently there is a mismatch b/w the ICID (Isolation Context ID) used
for DMA mapping keys and ICID used for accessing them.
-keys are DMA mapped using a job ring device, thus a job ring ICID
-keys are accessed from descriptors enqueued via Queue Interface,
thus using QI ICID
[Note: ICIDs of JRs, QI are configured by U-boot / other entity by:
-fixing up the corresponding job ring and controller DT nodes
-setting up corresponding caam ICID registers]
In order to avoid IOMMU faults, DMA map the key using the controller
device instead of a job ring device.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When IOMMU is enabled, iova -> phys address translation should be
performed using iommu_ops, not dma_to_phys().
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the controller device for caam/qi instead of allocating
a new platform device.
This is needed as a preparation to add support for working behind an
SMMU. A platform device allocated using platform_device_register_full()
is not completely set up - most importantly .dma_configure()
is not called.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.
There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).
Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs
Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().
While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to CAAM RM:
-crypto engine reads 4 S/G entries (64 bytes) at a time,
even if the S/G table has fewer entries
-it's the responsibility of the user / programmer to make sure
this HW behaviour has no side effect
The drivers do not take care of this currently, leading to IOMMU faults
when the S/G table ends close to a page boundary - since only one page
is DMA mapped, while CAAM's DMA engine accesses two pages.
Fix this by rounding up the number of allocated S/G table entries
to a multiple of 4.
Note that in case of two *contiguous* S/G tables, only the last table
might needs extra entries.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.
Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).
1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.
2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."
Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"
3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.
Fixes: 763069ba49 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a typo in the list of i.MX6 devices affected by an
issue wherein AXI bus transactions may not occur in
the correct order.
Fixes: 33d69455e4 ("crypto: caam - limit AXI pipeline to a depth of
1")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes a number of issues in the chelsio and caam drivers"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "crypto: caam/jr - Remove extra memory barrier during job ring dequeue"
crypto: caam - fix caam_dump_sg that iterates through scatterlist
crypto: caam - fix DKP detection logic
MAINTAINERS: Maintainer for Chelsio crypto driver
crypto: chelsio - count incomplete block in IV
crypto: chelsio - Fix softlockup with heavy I/O
crypto: chelsio - Fix NULL pointer dereference
The detection for DKP (Derived Key Protocol) relied on the value
of the setkey function. This was broken by the recent change which
added des3_aead_setkey.
This patch fixes this by introducing a new flag for DKP and setting
that where needed.
Fixes: 1b52c40919 ("crypto: caam - Forbid 2-key 3DES in FIPS mode")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
"API:
- Add support for AEAD in simd
- Add fuzz testing to testmgr
- Add panic_on_fail module parameter to testmgr
- Use per-CPU struct instead multiple variables in scompress
- Change verify API for akcipher
Algorithms:
- Convert x86 AEAD algorithms over to simd
- Forbid 2-key 3DES in FIPS mode
- Add EC-RDSA (GOST 34.10) algorithm
Drivers:
- Set output IV with ctr-aes in crypto4xx
- Set output IV in rockchip
- Fix potential length overflow with hashing in sun4i-ss
- Fix computation error with ctr in vmx
- Add SM4 protected keys support in ccree
- Remove long-broken mxc-scc driver
- Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
crypto: ccree - use a proper le32 type for le32 val
crypto: ccree - remove set but not used variable 'du_size'
crypto: ccree - Make cc_sec_disable static
crypto: ccree - fix spelling mistake "protedcted" -> "protected"
crypto: caam/qi2 - generate hash keys in-place
crypto: caam/qi2 - fix DMA mapping of stack memory
crypto: caam/qi2 - fix zero-length buffer DMA mapping
crypto: stm32/cryp - update to return iv_out
crypto: stm32/cryp - remove request mutex protection
crypto: stm32/cryp - add weak key check for DES
crypto: atmel - remove set but not used variable 'alg_name'
crypto: picoxcell - Use dev_get_drvdata()
crypto: crypto4xx - get rid of redundant using_sd variable
crypto: crypto4xx - use sync skcipher for fallback
crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
crypto: crypto4xx - fix ctr-aes missing output IV
crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
crypto: ccree - handle tee fips error during power management resume
crypto: ccree - add function to handle cryptocell tee fips error
...
Commit 307244452d ("crypto: caam - generate hash keys in-place")
fixed ahash implementation in caam/jr driver such that user-provided key
buffer is not DMA mapped, since it's not guaranteed to be DMAable.
Apply a similar fix for caam/qi2 driver.
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commits c19650d6ea ("crypto: caam - fix DMA mapping of stack memory")
and 65055e2108 ("crypto: caam - fix hash context DMA unmap size")
fixed the ahash implementation in caam/jr driver such that req->result
is not DMA-mapped (since it's not guaranteed to be DMA-able).
Apply a similar fix for ahash implementation in caam/qi2 driver.
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 04e6d25c5b ("crypto: caam - fix zero-length buffer DMA mapping")
fixed an issue in caam/jr driver where ahash implementation was
DMA mapping a zero-length buffer.
Current commit applies a similar fix for caam/qi2 driver.
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GCM detection logic has to change for two reasons:
-some CAAM instantiations with Era < 10, even though they have AES LP,
they now support GCM mode
-Era 10 upwards, there is a dedicated bit in AESA_VERSION[AESA_MISC]
field for GCM support
For Era 9 and earlier, all AES accelerator versions support GCM,
except for AES LP (CHAVID_LS[AESVID]=3) with revision CRNR[AESRN] < 8.
For Era 10 and later, bit 9 of the AESA_VERSION register should be used
to detect GCM support in AES accelerator.
Note: caam/qi and caam/qi2 are drivers for QI (Queue Interface), which
is used in DPAA-based SoCs; for now, we rely on CAAM having an AES HP
and this AES accelerator having support for GCM.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in an error message in the qi_error_list
array. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for new akcipher verify call remove sign/verify callbacks
from RSA backends and make PKCS1 driver call encrypt/decrypt instead.
This also complies with the well-known idea that raw RSA should never be
used for sign/verify. It only should be used with proper padding scheme
such as PKCS1 driver provides.
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: qat-linux@intel.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In function caam_jr_dequeue(), a full memory barrier is used before
writing response job ring's register to signal removal of the completed
job. Therefore for writing the register, we do not need another write
memory barrier. Hence it is removed by replacing the call to wr_reg32()
with a newly defined function wr_reg32_relaxed().
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
create_caam_req_fq() doesn't return NULL pointers so there is no need to
check. The NULL checks are problematic because it's hard to say how a
NULL return should be handled, so removing the checks is a nice cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some i.MX6 devices (imx6D, imx6Q, imx6DL, imx6S, imx6DP and imx6DQ) have
an issue wherein AXI bus transactions may not occur in the correct order.
This isn't a problem running single descriptors, but can be if running
multiple concurrent descriptors. Reworking the CAAM driver to throttle
to single requests is impractical, so this patch limits the AXI pipeline
to a depth of one (from a default of 4) to preclude this situation from
occurring.
This patch applies to known affected platforms.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam_jr_enqueue(), a write barrier is needed to order stores to job
ring slot before declaring addition of new job into input job ring.
The register write is done using wr_reg32() which internally uses
iowrite32() for write operation. The api iowrite32() issues a write
barrier before issuing write operation. Therefore, the wmb() preceding
wr_reg32() can be safely removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For each job ring, the variable 'ringsize' is initialised but never
used. Similarly variables 'inp_ring_write_index' and 'head' always track
the same value and instead of 'inp_ring_write_index', caam_jr_enqueue()
can use 'head' itself. Both these variables have been removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For each job ring pair, the output ring is processed exactly by one cpu
at a time under a tasklet context (one per ring). Therefore, there is no
need to protect a job ring's access & its private data structure using a
lock. Hence the lock can be removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a side effect of adding xcbc support, when the next_buffer is not
copied.
The issue occurs, when there is stored from previous state a blocksize
buffer and received, a less than blocksize, from user. In this case, the
nents for req->src is 0, and the next_buffer is not copied.
An example is:
{
.tap = { 17, 15, 8 },
.psize = 40,
.np = 3,
.ksize = 16,
}
Fixes: 12b8567f6f ("crypto: caam - add support for xcbc(aes)")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of reading job ring's occupancy registers for every req/rsp
enqueued/dequeued respectively, we read these registers once and store
them in memory. After completing a job enqueue/dequeue, we decrement
these values. When these values become zero, we refresh the snapshot of
job ring's occupancy registers. This eliminates need of expensive device
register read operations for every job enqueued and dequeued and hence
makes caam_jr_enqueue() and caam_jr_dequeue() faster. The performance of
kernel ipsec improved by about 6% on ls1028 (for frame size 408 bytes).
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Fixes: 35af640386 ("crypto: caam - Check for CAAM block presence before registering with crypto layer")
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
unlikely has already included in IS_ERR(), so just
remove redundant likely/unlikely annotation.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When generating a split key or hashing the key, DMA mapping the key
buffers coming directly from user is incorrect, since they are
not guaranteed to be DMAable.
Update driver to first copy user-provided key in the output buffer
("key_out") and then use this buffer for in-place computation
(split key generation, respectively key hashing).
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a side effect of adding xcbc support, which leads to DMA mapping the
key twice.
Fixes: 12b8567f6f ("crypto: caam - add support for xcbc(aes)")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When driver started using state->caam_ctxt for storing both running hash
and final hash, it was not updated to handle different DMA unmap
lengths.
Cc: <stable@vger.kernel.org> # v4.19+
Fixes: c19650d6ea ("crypto: caam - fix DMA mapping of stack memory")
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add cpu_relax() in the loop that tries to enqueue the FDs.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid console being flooded with prints in case HW is too busy to accept
new enqueue requests.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Driver was relying on an older DPIO API, which provided a CPU-affine DPIO
in case it was called with preemption disabled.
Since this is no longer the case, save the CPU-affine DPIO in per-cpu
private structure during setup and further use it on the hot path.
Note that preemption is no longer disabled while trying to enqueue an
FD. Thus it might be possible to run the enqueue on a different CPU
(due to migration, when in process context), however this wouldn't be a
functionality issue.
Since we allow for all cores to enqueue, we take care of data
structures setup to handle the case when number of (Rx, Tx) queue pairs
is smaller than number of cores.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify setkey callback for cbc des and 3des to check for weak keys.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ecb mode support for aes, des, 3des and arc4 ciphers.
ecb(*) reuses existing skcipher implementation, updating it with support
for no IV.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă