Commit Graph

24 Commits

Author SHA1 Message Date
Thomas Gleixner 75a6faf617 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 101 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:15 +02:00
Phil Edworthy 560ee7e910
spi: dw: Add support for an optional interface clock
The Synopsys SSI Controller has an interface clock, but most SoCs hide
this away. However, on some SoCs you need to explicitly enable the
interface clock in order to access the registers. Therefore, add support
for an optional interface clock.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20 17:21:02 +00:00
Linus Walleij 9400c41e77
spi: dw: Convert to use CS GPIO descriptors
This converts the DesignWare (dw) SPI master driver to
use GPIO descriptors for chip select handling.

This driver has a duplicate DT parser in addition to the
one in the core, sets up the line as non-asserted and
relies on the core to drive the GPIOs.

It is a pretty straight-forward conversion.

Cc: Talel Shenhar <talel@amazon.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Linuxarm <linuxarm@huawei.com>
Tested-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09 12:42:18 +00:00
Jay Fang 32215a6c6b
spi: dw-mmio: add ACPI support
The Hisilicon Hip08 platform, that uses ACPI, has this controller.
Let's add ACPI support for DW SPI MMIO-based host.

The ACPI ID used is "HISI0173" for the Designware SPI controller of
Hisilicon Hip08 platform.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-04 17:24:57 +00:00
Talel Shenhar f2d7047948
dw: spi: add support for Amazon's Alpine spi controller
Add support for a new devicetree compatible string called
'amazon,alpine-apb-ssi', which is necessary for the Amazon Alpine spi
controller. 'amazon,alpine-dw-apb-ssi' is used in the dw spi driver if
specified in the devicetree.  Otherwise, fall back to driver default
behavior, i.e. original dw IP hw driver behavior.

Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-11 15:11:04 +01:00
Alexandre Belloni c1d8b0825d
spi: dw-mmio: avoid hardcoded field mask
Define a mask for the IF_SI_OWNER field.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-31 15:54:13 +01:00
Alexandre Belloni be17ee0da3
spi: dw-mmio: add MSCC Jaguar2 support
Unfortunately, the Jaguar2 CPU_SYSTEM_CTRL register set has a different
layout than the Ocelot one. Handle that while keeping most of the code
common.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-29 14:15:16 +01:00
Alexandre Belloni c2c25cc397
spi: dw-mmio: add MSCC Ocelot support
Because the SPI controller deasserts the chip select when the TX fifo is
empty (which may happen in the middle of a transfer), the CS should be
handled by linux. Unfortunately, some or all of the first four chip
selects are not muxable as GPIOs, depending on the SoC.

There is a way to bitbang those pins by using the SPI boot controller so
use it to set the chip selects.

At init time, it is also necessary to give control of the SPI interface to
the Designware IP.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-30 12:02:08 +01:00
Marek Vasut 400c18e3dc spi: dw: Disable clock after unregistering the host
The dw_mmio driver disables the block clock before unregistering
the host. The code unregistering the host may access the SPI block
registers. If register access happens with block clock disabled,
this may lead to a bus hang. Disable the clock after unregistering
the host to prevent such situation.

This bug was observed on Altera Cyclone V SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18 19:16:49 +01:00
Andy Shevchenko 2f6fdefb35 spi: dw-mmio: remove message which is handled by core
devm_ioremap_resource() validates its parameters and issues an error message if
needed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-05 17:41:49 +00:00
Andy Shevchenko 9899995e98 spi: dw-mmio: convert to unified device property API
Convert the driver to use unfied device property API instead of OF one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Michael van der Westhuizen c4fe57f762 spi: dw: Allow interface drivers to limit data I/O to word sizes
The commit dd11444327 ("spi: dw-spi: Convert 16bit accesses to 32bit
accesses") changed all 16bit accesses in the DW_apb_ssi driver to 32bit.
This, unfortunately, breaks data register access on picoXcell, where the
DW IP needs data register accesses to be word accesses (all other
accesses appear to be OK).

This change introduces a new master variable to allow interface drivers
to specify that 16bit data transfer I/O is required.  This change also
introduces the ability to set this variable via device tree bindings in
the MMIO interface driver.  Both the core and the MMIO interface driver
default to the current 32bit behaviour.

Before this change, on a picoXcell pc3x3:
 spi_master spi32766: interrupt_transfer: fifo overrun/underrun
 m25p80 spi32766.0: error -5 reading 9f
 m25p80: probe of spi32766.0 failed with error -5

After this change:
 m25p80 spi32766.0: m25p40 (512 Kbytes)

Fixes: dd11444327 ("spi: dw-spi: Convert 16bit accesses to 32bit accesses")
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21 10:25:28 -07:00
Wolfram Sang 14ac00e033 spi: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:36 +02:00
Steffen Trumtrar 22dae17e7a spi: dw-mmio: add devicetree support
Allow probing the dw-mmio from devicetree.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03 19:44:04 +01:00
Baruch Siach d9c73bb8a3 spi: dw: add support for gpio controlled chip select
Also, use this opportunity to let spi_chip_sel() handle chip-select
deactivation as well.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24 18:09:05 +01:00
Baruch Siach 2418991efb spi: dw-mmio: allow multiple instances
Use the platform_device id to uniquely identify each SPI master instance.

Cc: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03 12:19:59 +00:00
Baruch Siach 020fe3fe11 spi: dw-mmio: prepare the clock before enabling
This is required for common clock support.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31 12:30:22 +00:00
Baruch Siach 04f421e7b0 spi: dw: use managed resources
Migrate mmio code and core driver to managed resources to reduce boilerplate
error handling code. Also, handle clk_enable() failure while at it, and drop
unused dw_spi iolen field.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31 12:30:18 +00:00
Julia Lawall 1e0d191f62 spi: designware: delete premature free_irq
Free_irq is not needed if there has been no request_irq.  Free_irq is
removed from both the probe and remove functions.  The correct request_irq
and free_irq appear to be in the add_host and remove_host functions in
spi-dw.c.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

*e = platform_get_irq(...);
... when != request_irq(e,...)
*free_irq(e,...)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:19:14 +01:00
Jingoo Han 89e8773075 spi: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13 18:00:30 +04:00
Grant Likely fd4a319bc9 spi: Remove HOTPLUG section attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Bill Pemberton has done most of the legwork on this series. I've used
his script to purge the attributes from the drivers/gpio tree.

Reported-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07 17:06:43 +00:00
Paul Gortmaker d7614de422 spi: Add module.h to implicit users in drivers/spi
We are clipping down the presence of module.h, since it was
everywhere.  If you really need it, you better call it out,
as per this changeset.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:17 -04:00
Grant Likely 940ab88962 drivercore: Add helper macro for platform_driver boilerplate
For simple modules that contain a single platform_driver without any
additional setup code then ends up being a block of duplicated
boilerplate.  This patch adds a new macro, module_platform_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-25 00:35:47 +02:00
Grant Likely ca632f5566 spi: reorganize drivers
Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-06 01:16:30 -06:00