If we want to be able to write drmselftests for non-static core
functions that are not intended to be used by drivers we need this
functions to be exported.
This adds a macro that is tied of CONFIG_DRM_DEBUG_SELFTEST, and uses
that to export drm_internal_framebuffer_create, in order for
subsequent patches to be able to test it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-7-alexandru-cosmin.gheorghe@arm.com
Mali-DP implements a number of tiled yuv formats which are not
currently described in drm_fourcc.h.
This adds those definitions and describes their memory layout by
using the newly added char_per_block, block_w, block_h.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-3-alexandru-cosmin.gheorghe@arm.com
For some pixel formats .cpp structure in drm_format info it's not
enough to describe the peculiarities of the pixel layout, for example
tiled formats or packed formats at bit level.
What's implemented here is to add three new members to drm_format_info
that could describe such formats:
- char_per_block[3]
- block_w[3]
- block_h[3]
char_per_block will be put in a union alongside cpp, for transparent
compatibility with the existing format descriptions.
Regarding, block_w and block_h they are intended to be used through
their equivalent getters drm_format_info_block_width /
drm_format_info_block_height, the reason of the getters is to abstract
the fact that for normal formats block_w and block_h will be unset/0,
but the methods will be returning 1.
Additionally, convenience function drm_format_info_min_pitch had been
added that computes the minimum required pitch for a given pixel
format and buffer width.
Using that the following drm core functions had been updated to
generically handle both block and non-block formats:
- drm_fb_cma_get_gem_addr: for block formats it will just return the
beginning of the block.
- framebuffer_check: Use the newly added drm_format_info_min_pitch.
- drm_gem_fb_create_with_funcs: Use the newly added
drm_format_info_min_pitch.
- In places where is not expecting to handle block formats, like fbdev
helpers I just added some warnings in case the block width/height
are greater than 1.
Changes since v3:
- Add helper function for computing the minimum required pitch.
- Improve/cleanup documentation
Changes since v8:
- Fixed build on 32bits arm architectures, with:
- return DIV_ROUND_UP((u64)buffer_width * info->char_per_block[plane],
+ return DIV_ROUND_UP_ULL((u64)buffer_width * info->char_per_block[plane],
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101170055.5433-1-alexandru-cosmin.gheorghe@arm.com
Having failed any attempts at a more generic solution,
I fall back to the very specific solution: define a simple
panel for the ARM RTSM emulated platforms.
I am doing this so we can convert all old users from the
previous fbdev driver to the PL111 DRM driver.
This works fine as far as I can test, provided the
device tree for RTSM AEMv8 is augmented accordingly.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-9-noralf@tronnes.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-8-noralf@tronnes.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-7-noralf@tronnes.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-3-noralf@tronnes.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-2-noralf@tronnes.org
drivers/gpu/drm/drm_syncobj.c:181:6: warning: no previous prototype for ‘drm_syncobj_add_callback’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_syncobj.c:190:6: warning: no previous prototype for ‘drm_syncobj_remove_callback’ [-Wmissing-prototypes]
Fixing that leads to
drivers/gpu/drm/drm_syncobj.c:181:13: warning: ‘drm_syncobj_add_callback’ defined but not used [-Wunused-function]
so remove the unused drm_syncobj_add_callback() entirely.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031120710.21582-1-chris@chris-wilson.co.uk
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
If the clipped dirty region's x/y happened to align to 256, we would
have set the top 8 bits wrong. Noticed by inspection, not by
reproducing a bug.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-4-eric@anholt.net
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
I want to sort out support for tinydrm in vc4, so I needed to get a
tinydrm-appropriate panel working and this is what I had on hand.
This is derived from a combination of ili9341.c from tinydrm and
fb_hx8357d.c from staging's fbtft.
v2: Write my own register defs from the spec to not need the header
from fbtft. Fix spi device string to enable module autoloading.
(Suggestions by Noralf)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-3-eric@anholt.net
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v1)
This adds a new binding for Himax HX8357D display panels. It includes
a compatible string for one display (more can be added in the future).
The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch
Screen for Raspberry Pi.
[1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads
This binding is closely modeled after the ili9341 binding, for a
similar product from adafruit. The primary difference is that the
hx8357d doesn't have a reset line that I can find in the schematics.
v2: Document the "reg" property (requested by Rob), fix commit message
typo (Noralf)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.net
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Without this, the xserver relies on what the 3D driver exposes and
assumes that the display can handle it, and then the DRM driver
happily tries to scan out a tiled format.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025162635.6689-1-eric@anholt.net
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Recent qemu (latest master branch, upcoming 3.1 release) got support
for EDID data. This patch adds guest driver support.
EDID support in qemu is not (yet) enabled by default, so please use
'qemu -device VGA,edid=on' for testing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181029205048.13200-1-kraxel@redhat.com
Add the Rockchip-sepcific dual-dsi setup and hook it into the VOP as well.
As described in the general dual-dsi devicetree binding, the panel should
define two input ports and point each of them to one of the used dsi-
controllers, as well as declare one of them as clock-master.
This is used to determine the dual-dsi state and get access to both
controller instances.
v6:
handle master+slave component in dsi-attach
v5:
use driver-internal mechanism to find dual dsi slave
v4:
add component directly in probe when adding empty dsi slave controller
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-8-heiko@sntech.de
Allow to also drive a slave dw-mipi-dsi controller in a dual-dsi
setup. This will require additional implementation-specific
code to look up the slave instance and do specific setup.
Also will probably need code in the specific crtcs as dual-dsi
does not equal two separate dsi outputs.
To activate, the implementation-specific code should set the slave
using dw_mipi_dsi_set_slave() before calling __dw_mipi_dsi_bind().
v2:
- expect real interface number of lanes
- keep links to both master and slave
v3:
- remove unneeded separate variables
- remove unneeded second slave settings
- disable slave before master
- lane-sum calculation comments
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-7-heiko@sntech.de
Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge and remove the old separate one.
changes:
v2:
add err_pllref, remove unnecessary encoder.enable & disable
correct spelling mistakes
v3:
call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind()
fix typo, use of_device_get_match_data(),
change some bind() logic into probe()
add 'dev_set_drvdata()'
v4:
return -EINVAL when can not get best_freq
add a clarifying comment when get vco
add review tag
v5:
keep our power domain enabled while touching GRF
v6:
change func name dw_mipi_encoder_disable to
dw_mipi_dsi_encoder_disable
v7:
none
v8: Heiko
add Archit's Review tag
adapt to recent changes in the original rockchip-dsi driver
beautify grf-handling
split hw-setup (resources, dsi-host) from bind into probe
v2-new: Heiko
add SPDX header instead of license blurb
drop old versioning to not confuse people
v3-new: Heiko
include ordering
moved hwaccess from mode_set to enable callback
move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
v4-new: Heiko
rebase against recent rockchip-dsi changes
move to call component_add in the new glue host-attach
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-6-heiko@sntech.de
With the regular means of adding the dsi-component in probe it creates
a race condition with the panel probing, as the panel device only gets
created after the dsi-bus got created.
When the panel-driver is build as a module it currently fails hard as the
panel cannot be probed directly:
dw_mipi_dsi_bind()
__dw_mipi_dsi_probe()
creates dsi bus
creates panel device
triggers panel module load
panel not probed (module not loaded or panel probe slow)
drm_bridge_attach
fails with -EINVAL due to empty panel_bridge
Additionally the panel probing can run concurrently with dsi bringup
making it possible that the panel can already be found but dsi-attach
hasn't finished running.
To solve that cleanly we may want to only create the component after
the panel has finished probing, by calling component_add from the
host-attach dsi callback.
As that is specific to glue drivers, add a new struct for host_ops
so that glue drivers can tell the bridge to call specific functions
after the common host-attach and before the common host-detach run.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-4-heiko@sntech.de
__dw_mipi_dsi_probe() does all the grabbing of resources and does it using
devm-helpers. So this is happening on each try of master bringup possibly
slowing down things a lot.
Drivers using the component framework may instead want to call
dw_mipi_dsi_probe separately in their probe function to setup resources
early. That way the dsi bus also gets created earlier and also not
recreated on each bind-try, so that attached panels can load their modules
and be probed way before the bridge-attach in the bind call.
So drop the call to __dw_mipi_dsi_probe and modify the function to take
a struct dw_mipi_dsi instead of the platform-device.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-3-heiko@sntech.de
Right now the host is only unregistered when the driver is used via the
bridge api and not via the component api, leading to the host staying
registered in cases like probe deferral.
So move the host unregister to the general remove function, so that it
gets cleaned up in all cases.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-2-heiko@sntech.de
It is possible to run out of memory while allocating IDs. The current
code would create a context with an invalid ID; change it to return
-ENOMEM to userspace.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-3-willy@infradead.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These IDRs were only being used to allocate unique numbers, not to look
up pointers, so they can use the more space-efficient IDA instead.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-2-willy@infradead.org
[ kraxel: resolve conflict ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move virtio_gpu_resource_id_{get,put} to virtgpu_object.c and make them
static. Allocate and free the id on creation and destroy, drop all
other calls. That way objects have a valid handle for the whole
lifetime of the object.
Also fixes ids leaking. Worst offender are dumb buffers, and I think
some error paths too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-7-kraxel@redhat.com
Track whenever the virtio_gpu_object is already created (i.e. host knows
about it) in a new variable. Add checks to virtio_gpu_object_attach()
to do nothing on objects not created yet.
Make virtio_gpu_ttm_bo_destroy() use the new variable too, instead of
expecting hw_res_handle indicating the object state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-2-kraxel@redhat.com
This patch avoids that building the bridge/analogix source code with
smatch triggers complaints about inconsistent indenting. It also fixes
a typo in DRM_ERROR message, attch is replaced for attach.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016095336.15656-1-enric.balletbo@collabora.com
The is_double flag is a boolean currently assigned to the value of the d
variable, that is either 1 or 2. It means that this is_double variable is
always set to true, even though the initial intent was to have it set to
true when d is 2.
Fix this.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.ripard@bootlin.com
The is_double variable is used to store, and possibly returning to the
calling function, whether it needs to double the rate of the parent clock
or not.
In the case where it does, the variable is affected, but in the case where
it doesn't we return some uninitialized value. Fix this.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-1-maxime.ripard@bootlin.com
Earlier commit updated the vgem driver to improve the topology, by
passing a platform device as parent to drm_dev_init(). Shortly
afterwords we updated the core function to BUG() in order to catch any
buggy drivers passing NULL as parent.
While I missed the vkms driver (as the patch predates vkms by a few
months), the BUG caught the issue within couple of hours.
Swap the drm_dev_init <> platform_device_register_simple order, to
the driver back to life.
Fixes: f08877e794 ("drm: BUG_ON if passing NULL parent to drm_dev_init")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak Sharma <deepak.sharma@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026100550.625-1-emil.l.velikov@gmail.com
HDMI 2.0 monitors may not support SCDC and still be able to accept VICs
above 63. Use multiple EDID capbilities to determine if the SINK is
actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique
EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is
not used during the test. The current HDMI AVI infoframe code only uses the
SCDC supported information in the HDMI Forum VSDB to determine if the sink
is HDMI 2.0. This patch adds a check for YCbCr420 present in the EDID
supported formats as well as the existing SCDC supported check.
HDMI 2.0 CTS HF1-51 test fails on the QD980B.
V2: Make check for display_info->color formats == YCbCR420 and SCDC
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540415073-5102-1-git-send-email-clinton.a.taylor@intel.com
drivers/gpu/drm/drm_syncobj.c:202:4-14: ERROR: function drm_syncobj_find_signal_pt_for_point called on line 390 inside lock on line 389 but uses GFP_KERNEL
Find functions that refer to GFP_KERNEL but are called with locks held.
Generated by: scripts/coccinelle/locks/call_kern.cocci
v2:
syncobj->timeline still needs protect.
v3:
use a global signaled fence instead of re-allocation.
v4:
Don't need moving lock.
Don't expose func.
v5:
rename func and directly return.
Tested by: syncobj_wait and ./deqp-vk -n dEQP-VK.*semaphore* with
lock debug kernel options enabled.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Christian König <easy2remember.chk@googlemail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
CC: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/258623/
Add the device tree bindings for Truly NT35597 panel driver. This panel
driver supports both single DSI and dual DSI.
However, this patch series supports only dual DSI.
Changes in v10:
- Remove active high in the documentation for mode gpio
- Fix commmit text detail about the board and also
fix a typo
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-2-git-send-email-abhinavk@codeaurora.org
Add support for Truly NT35597 panel driver used in MSM reference
platforms. This panel driver supports both single DSI and dual
DSI modes.
However, this patch series adds support only for dual DSI mode.
Changes in v10:
- None
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-1-git-send-email-abhinavk@codeaurora.org
Alexandru Gheorghe