Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
Add RXIQ calibration found in mtk driver. With old openwrt builds this
gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout).
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
Move bbp_ready and rf_ready busy wait functions up in the code so they
can more easily be used. Allow specifying register mask in rf_ready
function which is useful for calibration routines which will be added
in follow-up commits.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org
Implement support for external PA connected to MT7620A.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
[pozega.tomislav@gmail.com: use chanreg and dccal helpers.]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/af2c68ff831816a86fc39b0c10911c129a1f03dc.1663445157.git.daniel@makrotopia.org
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Tested-by: Christoph Krapp <achterin@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org
Fix incorrect RF value encoded in EEPROM on devices with Ralink Rt5592
PCIe radio (a single chip 2T2R 802.11abgn solution).
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d7eccb2c7b8ec4cd360fa2007796abffc35abb0d.1663445157.git.daniel@makrotopia.org
The number of spatial streams used when acting as a beamformee in VHT
mode are reported by the firmware as 7 (8 sts - 1) both in IPQ6018 and
IPQ8074 which respectively have 2 and 4 sts each. So the firmware should
report 1 (2 - 1) and 3 (4 - 1).
Fix this by checking that the number of VHT beamformee sts reported by
the firmware is not greater than the number of receiving antennas - 1.
The fix is based on the same approach used in this same function for
sanitizing the number of sounding dimensions reported by the firmware.
Without this change, acting as a beamformee in VHT mode is not working
properly.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220616173947.21901-1-jesus.manzano@galgus.net
Devices may provide their own MAC address via system firmware (e.g.,
device tree), especially in the case where the device doesn't have a
useful EEPROM on which to store its MAC address (e.g., for integrated
ahb WCN6750).
Use the generic device helper to retrieve the MAC address, and (if
present) honor it above the MAC address advertised by the card.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Jun Yu <junyuu@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220920003117.841442-1-junyuu@chromium.org
Driver does not support get_txpower mac ops because of which
cfg80211 returns vif->bss_conf.txpower to user space. bss_conf.txpower
gets its value from ieee80211_channel->max_reg_power. However, the final
txpower is dependent on few other parameters apart from max regulatory
supported power. It is the firmware which knows about all these
parameters and considers the minimum for each packet transmission.
All ath11k firmware reports the final tx power in firmware pdev stats
which falls under fw_stats.
Add get_txpower mac ops to get the tx power from firmware leveraging
fw_stats and return it accordingly.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220603082814.31466-3-quic_adisi@quicinc.com
Currently, firmware stats, comprising pdev, vdev and beacon stats are
part of debugfs. In firmware pdev stats, firmware reports the final
Tx power used to transmit each packet. If driver wants to know the
final Tx power being used at firmware level, it can leverage from
firmware pdev stats.
Move firmware stats out of debugfs context in order to leverage
the final Tx power reported in it even when debugfs is disabled.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220603082814.31466-2-quic_adisi@quicinc.com
When running suspend test, kernel crash happened in ath10k, and it is
fixed by commit b72a4aff94 ("ath10k: skip ath10k_halt during suspend
for driver state RESTARTING").
Currently the crash is fixed, but as a common code style, it is better
to set the pointer to NULL after memory is free.
This is to address the code style and it will avoid potential bug of
use-after-free.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220505092248.787-1-quic_wgong@quicinc.com
It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(),
as below, it will not print when debug_mask is not set ATH11K_DBG_DATA.
ath11k_dbg(ab, ATH11K_DBG_DATA,
"failed to find the peer with peer_id %d\n",
ppdu_info.peer_id);
When run scan with station disconnected, the peer_id is 0 for case
HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called
from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is
reset to 0 in the while loop, so it does not match condition of the
check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and
then the log "failed to find the peer with peer_id 0" print after the
check in the loop, it is below call stack when debug_mask is set
ATH11K_DBG_DATA.
The reason is this commit 01d2f285e3 ("ath11k: decode HE status tlv")
add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in
ath11k_dp_rx_process_mon_status(), but the commit does not initialize
the peer_id to HAL_INVALID_PEERID, then lead the check mis-match.
Callstack of the failed log:
[12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k]
[12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd
[12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246
[12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000
[12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18
[12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000
[12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40
[12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000
[12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000
[12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0
[12335.689360] Call Trace:
[12335.689377] <IRQ>
[12335.689418] ? rcu_read_lock_held_common+0x12/0x50
[12335.689447] ? rcu_read_lock_sched_held+0x25/0x80
[12335.689471] ? rcu_read_lock_held_common+0x12/0x50
[12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k]
[12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k]
[12335.689653] ? lock_acquire+0xef/0x360
[12335.689681] ? rcu_read_lock_sched_held+0x25/0x80
[12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k]
[12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k]
[12335.689860] call_timer_fn+0xb2/0x2f0
[12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k]
[12335.689970] run_timer_softirq+0x21f/0x540
[12335.689999] ? ktime_get+0xad/0x160
[12335.690025] ? lapic_next_deadline+0x2c/0x40
[12335.690053] ? clockevents_program_event+0x82/0x100
[12335.690093] __do_softirq+0x151/0x4a8
[12335.690135] irq_exit_rcu+0xc9/0x100
[12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0
[12335.690189] </IRQ>
[12335.690204] <TASK>
[12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20
Reset the default value to HAL_INVALID_PEERID each time after memset
of ppdu_info as well as others memset which existed in function
ath11k_dp_rx_process_mon_status(), then the failed log disappeared.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Fixes: 01d2f285e3 ("ath11k: decode HE status tlv")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220518033556.31940-1-quic_wgong@quicinc.com
Currently commit 1f682dc9fb ("ath11k: reduce the wait time of 11d scan
and hw scan while add interface") introduced a wait_for_completion_timeout
operation for ar->scan.completed, another one is existed in ath11k_scan_stop(),
then ath11k has two places to wait for the ar->scan.completed and they
run in different thread, thus it is possible to happend that the two
thread both enter wait status. To handle this scenario, ath11k should
change the complete() to complete_all() for the ar->scan.completed. This
also work well when it is only one thread wait for ar->scan.completed.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220919024413.25083-1-quic_wgong@quicinc.com
Since we maintain coexistence as shared code, so move coexistence version
from chip specific attribute to a definition.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-10-pkshih@realtek.com
Add control logic to operate Wi-Fi to BT scoreboard to control BT scan
priority. And patch mechanism parameter to enhance Wi-Fi throughput while
coexisting with BT profile & BT scan. Set PTA priority let Wi-Fi BT can RX
at the same time.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-9-pkshih@realtek.com
If Wi-Fi driver send Wi-Fi status to BT via scoreboard too frequent in a
short moment, BT will loss some of them because of hardware response time.
To avoid this issue, change the code flow. Summarize the scoreboard changes
and if the value have changed, send the scoreboard to BT only once in
a coexistence processing cycle. It also can help to reduce driver I/O.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-8-pkshih@realtek.com
To prevent LNA2 change its gain during a Wi-Fi aggregation packet while
GNT_BT pull high. Otherwise, changes of this gain will destroy the whole
aggregation when Wi-Fi RX.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-7-pkshih@realtek.com
WiFi/BT combo module could only have two antenna, namely WL_S0 and WL_S1.
WiFi can use two antenna to TX/RX 2SS data, and BT can share one of the
antenna. This patch is to allow WiFi to TX/RX 1SS data like ACK/RTS/CTS to
improve Wi-Fi performance while coexisting with Bluetooth.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-6-pkshih@realtek.com
This report is to record firmware call flow like notify events, and take
actions. This can help to address if firmware flow is in expectation.
Implement v1 parser to support 8852CE firmware report.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-5-pkshih@realtek.com
This debug entry is to summarize important messages to quickly address
problem types, such as firmware hang, C2H/H2C stuck, or too much
occupation of BT A2DP. If unexpected something is addressed, we can dig
the problem via other debug messages that provide more detail information.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-4-pkshih@realtek.com
To analyze debug log quickly, use readable name in string format instead.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-3-pkshih@realtek.com
'cysta' is short for statistics for cycles. That is a circular buffer to
record snapshot status including beacon count, RX count, TX count etc.
Since 8852CE Wi-Fi firmware report this statistics in different format,
add v1 parser by this patch.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-2-pkshih@realtek.com
There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:
(Interrupt context)
fw_dump_timer_fn
mwifiex_upload_device_dump
dev_coredumpv(..., GFP_KERNEL)
dev_coredumpm()
kzalloc(sizeof(*devcd), gfp); //may sleep
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
The corresponding fail log is shown below:
[ 135.275938] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.281029] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
...
[ 135.293613] Call Trace:
[ 135.293613] <IRQ>
[ 135.293613] dump_stack_lvl+0x57/0x7d
[ 135.293613] __might_resched.cold+0x138/0x173
[ 135.293613] ? dev_coredumpm+0xca/0x2e0
[ 135.293613] kmem_cache_alloc_trace+0x189/0x1f0
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] dev_coredumpm+0xca/0x2e0
[ 135.293613] ? devcd_freev+0x10/0x10
[ 135.293613] dev_coredumpv+0x1c/0x20
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] mwifiex_upload_device_dump+0x65/0xb0
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] call_timer_fn+0x122/0x3d0
[ 135.293613] ? msleep_interruptible+0xb0/0xb0
[ 135.293613] ? lock_downgrade+0x3c0/0x3c0
[ 135.293613] ? __next_timer_interrupt+0x13c/0x160
[ 135.293613] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] __run_timers.part.0+0x3f8/0x540
[ 135.293613] ? call_timer_fn+0x3d0/0x3d0
[ 135.293613] ? arch_restore_msi_irqs+0x10/0x10
[ 135.293613] ? lapic_next_event+0x31/0x40
[ 135.293613] run_timer_softirq+0x4f/0xb0
[ 135.293613] __do_softirq+0x1c2/0x651
...
[ 135.293613] RIP: 0010:default_idle+0xb/0x10
[ 135.293613] RSP: 0018:ffff888006317e68 EFLAGS: 00000246
[ 135.293613] RAX: ffffffff82ad8d10 RBX: ffff888006301cc0 RCX: ffffffff82ac90e1
[ 135.293613] RDX: ffffed100d9ff1b4 RSI: ffffffff831ad140 RDI: ffffffff82ad8f20
[ 135.293613] RBP: 0000000000000003 R08: 0000000000000000 R09: ffff88806cff8d9b
[ 135.293613] R10: ffffed100d9ff1b3 R11: 0000000000000001 R12: ffffffff84593410
[ 135.293613] R13: 0000000000000000 R14: 0000000000000000 R15: 1ffff11000c62fd2
...
[ 135.389205] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.
[ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
As we can see, there is no bug now.
Fixes: f5ecd02a8b ("mwifiex: device dump support for usb interface")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5cfa5c473ff6d069cb67760ffa04a2f84ef450a8.1661252818.git.duoming@zju.edu.cn
Add support for WoW on WCN6750 chipset.
Unlike other chips where WoW exit happens after sending WoW wakeup
WMI command, exit from WoW suspend in the case of WCN6750 happens
upon sending a WoW exit SMP2P (Shared memory point to point) message
to the firmware.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220902112520.24804-3-quic_mpubbise@quicinc.com
In current code STA_KEEPALIVE_ARP_RESPONSE TLV header is included only
when ARP method is used, this causes firmware always to crash when wowlan
is enabled because firmware needs it to be present no matter ARP method
is used or not.
Fix this issue by including STA_KEEPALIVE_ARP_RESPONSE TLV header by
default.
Also fix below typo:
s/WMI_TAG_STA_KEEPALVE_ARP_RESPONSE/WMI_TAG_STA_KEEPALIVE_ARP_RESPONSE/
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Fixes: 0f84a156aa ("ath11k: Handle keepalive during WoWLAN suspend and resume")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220913044358.2037-1-quic_bqiang@quicinc.com
The signal-to-noise-ratio SNR is returned by the wcn36xx firmware for each
received frame. SNR represents all of the unwanted interference signal
after filtering out the fundamental frequency and harmonics of the
frequency.
Noise can come from various electromagnetic sources, from temperature
affecting the performance hardware components or quantization effects
converting from analog to digital domains.
The SNR value returned by the WiFi firmware then is a good source of
entropy.
Other WiFi drivers offer up the noise component of the FFT as an entropy
source for the random pool e.g.
commit 2aa56cca35 ("ath9k: Mix the received FFT bins to the random pool")
I attended Jason's talk on sources of randomness at Plumbers and it
occurred to me that SNR is a reasonable candidate to add.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220915004117.1562703-2-bryan.odonoghue@linaro.org
If request_partial_firmware_into_buf() fails then "firmware" is not
initialized and the release_firmware(firmware) will crash.
Fixes: deebea35d6 ("wifi: rtw89: early recognize FW feature to decide if chanctx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YyMzDtX/3fUBnonC@kili
Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver
is seeing tx skbs submitted to it with the queue-id set to 2 / set to
IEEE80211_AC_BE on a rt2500 card when associating with an access-point.
This causes rt2x00queue_get_tx_queue() to return NULL and the following
error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to
send packet over invalid queue 2", after which association with the AP
fails.
This patch works around this by mapping QID_AC_BE and QID_AC_BK
to QID_AC_VI when there are only 2 tx_queues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220908173618.155291-2-hdegoede@redhat.com
Update tx descriptor settings so broadcast packets on other ports can be
issued properly when DTIM count is 0. Before this, all broadcast packets
are sent via port 0 and won't be transmitted correctly.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-8-pkshih@realtek.com
In monitor mode we should be able to received all packets even if it's not
destined to us. But after scan, the configuration was wrongly set, so we
fix it.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-7-pkshih@realtek.com
This avoid potential memory leak under power saving mode.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-6-pkshih@realtek.com
NAV upper register is to limit the maximum NAV value to prevent
unexpected NAV, but the old setting is too small to reflect NAV from
AP transmiting big MPDU at once.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-3-pkshih@realtek.com
8852C needs this to change CMAC dma to full mode to keep receiving
packets after RX full event being resolved.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-2-pkshih@realtek.com
SER (system error recovery) can deal with different crash types by
different levels of processes. Previous FW crash simulation triggers
a CPU exception which is one kind of SER L2 type. It can verify SER L2
flow which includes HW/FW restart.
Now, we want to increase crash simulation types. A debug function is added
to trigger control error in purpose for SER L1 simulation/verification.
And, debugfs fw_crash is extended to accept different parameters.
echo 1 > fw_crash:
simulate CPU exception as before
(keep 1 for compatibility with previous)
It will be catched and handled by SER L2.
(this requires HW/FW restart)
echo 2 > fw_crash:
simulate control error
It will be catched and handled by SER L1.
(driver and FW cooperate to recover this)
Besides, in order to apply to the above two cases,
rename RTW89_FLAG_RESTART_TRIGGER to RTW89_FLAG_CRASH_SIMULATING
and adjust where SER flow clears this bit for both L1 and L2.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-5-pkshih@realtek.com
With FW >= v0.27.40.0, 8852C FW has feature to handle crash simulation.
Besides, use RTW89_WCPU_BASE_MASK to replace use of RTW89_WCPU_BASE_ADDR
and work for both 8852A and 8852C.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-4-pkshih@realtek.com
Introudce a H2C feature to drop packets according to given parameters.
And, we implement instances to drop packets from BE, BK, VI, VO queues
by vif or sta. Then, we refine our callback of ieee80211_ops::flush to
deal with the case of drop=true via this feature.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-3-pkshih@realtek.com
Seaprate calling of rtw89_h2c_tx() out of if-expression, and bypass the
return value to upper caller.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-2-pkshih@realtek.com
Different chips use different register and mask for
tx dma channels, so concentrate them.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912071706.13619-4-pkshih@realtek.com
Some PCI and MAC registers are changed for different
chips and correct them accordingly. And HCI MAD functions
belongs to MAC core, so move it to mac.h/.c.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912071706.13619-3-pkshih@realtek.com
For 8852C, rtw89_pci_lv1rst_stop_dma() and rtw89_pci_lv1rst_start_dma()
are offloaded to FW L1 reset flow. So, driver no longer needs to do them.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912071706.13619-2-pkshih@realtek.com
Add ops set_tid_config to support TID specific configuration.
We currently only support ampdu setting.
The command example is:
iw wlan0 set tidconf tids 0x3 ampdu off
iw wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0x2 ampdu on
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912070014.10018-3-pkshih@realtek.com
Support setting HE GI and LTF values to the kernel via nl80211.
We currently only support some GI and LTF values settings.
The command example is:
iw wlan0 set bitrates he-gi-2.4 0.8 he-ltf-2.4 2
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912070014.10018-2-pkshih@realtek.com
The variable cnt_connecting is to indicate if we are connecting to an AP.
This is an important clue for coexistence to assign more time slot to WiFi
side in this situation to ensure WiFi can establish connection.
Without this patch, compiler warns:
drivers/net/wireless/realtek/rtw89/coex.c:3244:25: warning: variable
'cnt_connecting' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912021009.6011-1-pkshih@realtek.com
To reduce register IO, combine set_gnt_wl/set_gnt_bt to set the same
register one time. Because RTL8852C use different register to control
antenna path, so make correction of path control related debug logs.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220913092546.43722-8-pkshih@realtek.com
RTL8852C don't need to send the data trace_step which used to tell
firmware how many TDMA steps should record. Remove the member.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220913092546.43722-7-pkshih@realtek.com
Show TDMA information containing TDMA policy and time slot of Wi-Fi/BT in
debug message to check things are in expected. The v1 format contains
additional header, and remaining part is the same as original. So 8852CE
selects v1 version, and then everything like original.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220913092546.43722-6-pkshih@realtek.com
Parsing firmware error message from original version and v1 reports to
show up exception counter of commands from firmware in debug message.
Then, we can make sure exchange commands are correct totally.
In the later version Wi-Fi firmware(v1), the report format was changed.
With this update, we can yield correct report from proper struct.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220913092546.43722-5-pkshih@realtek.com
Because RTL8852A/RTL8852C use different firmware buffer size to
send C2H packet, it's necessary to use different size to parse C2H report.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220913092546.43722-4-pkshih@realtek.com
The later version Wi-Fi firmware will report null data TX times,
so the structure is different from before.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220913092546.43722-3-pkshih@realtek.com
These newer PCIe core revisions include new sets of registers that must
be used instead of the legacy ones. Introduce a brcmf_pcie_reginfo to
hold the specific register offsets and values to use for a given
platform, and change all the register accesses to indirect through it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDo8-0077aq-6I@rmk-PC.armlinux.org.uk
Newer chips used on Apple platforms have a max_rxbufpost greater than
512, which causes warnings when brcmf_msgbuf_rxbuf_data_fill tries to
put more entries in the ring than will fit. Increase the ring sizes
to 1024.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDo3-0077ak-2h@rmk-PC.armlinux.org.uk
On Device Tree platforms, it is customary to be able to set the MAC
address via the Device Tree, as it is often stored in system firmware.
This is particularly relevant for Apple ARM64 platforms, where this
information comes from system configuration and passed through by the
bootloader into the DT.
Implement support for this by fetching the platform MAC address and
adding or replacing the macaddr= property in nvram. This becomes the
dongle's default MAC address.
On platforms with an SROM MAC address, this overrides it. On platforms
without one, such as Apple ARM64 devices, this is required for the
firmware to boot (it will fail if it does not have a valid MAC at all).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnx-0077ae-VK@rmk-PC.armlinux.org.uk
On Apple platforms, firmware selection uses the following elements:
Property Example Source
============== ======= ========================
* Chip name 4378 Device ID
* Chip revision B1 OTP
* Platform shikoku DT (ARM64) or ACPI (x86)
* Module type RASP OTP
* Module vendor m OTP
* Module version 6.11 OTP
* Antenna SKU X3 DT (ARM64) or ACPI (x86)
In macOS, these firmwares are stored using filenames in this format
under /usr/share/firmware/wifi:
C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt
To prepare firmwares for Linux, we rename these to a scheme following
the existing brcmfmac convention:
brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\
<mod_vendor>-<mod_version>-<antenna_sku>.txt
The NVRAM uses all the components, while the firmware and CLM blob only
use the chip/revision/platform/antenna_sku:
brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin
e.g.
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin
In addition, since there are over 1000 files in total, many of which are
symlinks or outright duplicates, we deduplicate and prune the firmware
tree to reduce firmware filenames to fewer dimensions. For example, the
shikoku platform (MacBook Air M1 2020) simplifies to just 4 files:
brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob
brcm/brcmfmac4378b1-pcie.apple,shikoku.bin
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt
This reduces the total file count to around 170, of which 75 are
symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and
61 NVRAM config files. We also slightly process NVRAM files to correct
some formatting issues.
To handle this, the driver must try the following path formats when
looking for firmware files:
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt *
brcm/brcmfmac4378b1-pcie.apple,shikoku.txt
* Not relevant for NVRAM, only for firmware/CLM.
The chip revision nominally comes from OTP on Apple platforms, but it
can be mapped to the PCI revision number, so we ignore the OTP revision
and continue to use the existing PCI revision mechanism to identify chip
revisions, as the driver already does for other chips. Unfortunately,
the mapping is not consistent between different chip types, so this has
to be determined experimentally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDns-0077aY-Qn@rmk-PC.armlinux.org.uk
On Apple ARM64 platforms, firmware selection requires two properties
that come from system firmware: the module-instance (aka "island", a
codename representing a given hardware platform) and the antenna-sku.
We map Apple's module codenames to board_types in the form
"apple,<module-instance>".
The mapped board_type is added to the DTS file in that form, while the
antenna-sku is forwarded by our bootloader from the Apple Device Tree
into the FDT. Grab them from the DT so firmware selection can use
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnn-0077aS-NA@rmk-PC.armlinux.org.uk
On Apple platforms, the One Time Programmable ROM in the Broadcom chips
contains information about the specific board design (module, vendor,
version) that is required to select the correct NVRAM file. Parse this
OTP ROM and extract the required strings.
Note that the user OTP offset/size is per-chip. This patch does not add
any chips yet.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDni-0077aM-I6@rmk-PC.armlinux.org.uk
Apple platforms have firmware and config files identified with multiple
dimensions. We want to be able to find the most specific firmware
available for any given platform, progressively trying more general
firmwares.
To do this, first add support for passing in multiple board_types,
which will be tried in sequence.
Since this will cause more log spam due to missing firmwares, also
switch the secondary firmware fecthes to use the _nowarn variant, which
will not log if the firmware is not found.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnd-0077aG-Dk@rmk-PC.armlinux.org.uk
Now that the firmware fetcher can handle per-board CLM files, load the
CLM blob alongside the other firmware files and change the bus API to
just return the existing blob, instead of fetching the filename.
This enables per-board CLM blobs, which are required on Apple platforms.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnY-0077aA-8f@rmk-PC.armlinux.org.uk
Teach brcm_alt_fw_paths to correctly split off variable length
extensions, and enable alt firmware lookups for the CLM blob firmware
requests.
Apple platforms have per-board CLM blob files.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnT-0077a4-4k@rmk-PC.armlinux.org.uk
This notification replaces the WOWLAN_GET_STATUSES command-and-response,
so it's required to parse all the keys in the notification just like
what happened when that command was used.
Move around a few required static functions in order to avoid forward
declarations.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.ca3fb23cab81.I0a9fe7729af4567b98813bc51bad13ee5512a0ae@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
In recent patches notifications based d3 resume flow was added,
and the resume flow was changed.
Currently, when resuming from d3 during which an assert was thrown,
the resume flow skips the iteration over active interfaces
preventing the sta to reconnect to the ap.
Perform the iteration in case an assert was thrown to fix it.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.ad888cc6cd91.Ib56e416fce17df089edf76d22896430df5ebe080@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
We have recently enabled resume flow based on notifications.
These notifications are sent by the FW when completing the resume flow.
From IWL_DEVICE_FAMILY_AX210 the resume flow is triggered by the
transport layer on iwl_trans_d3_resume.
On IWL_DEVICE_FAMILY_22000 and earlier we trigger the resume flow by
sending the D0I3 command.
Currently, we are waiting for the notifications before sending the
command, the notifications won't be sent by the FW since there is no
resume trigger to piggyback on.
Send the command before starting the wait flow to fix it.
Signed-off-by: Haim, Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.5f0f251edf9c.Ia49ab73105af6f52aa7d318f4984edecd3b0671a@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Due to IMR, when host returns from hibernate, commands cannot
be sent as part of the resume flow, and so after ending
d3 the FW needs to send notifications instead of responses.
This notification indicates whether a fw reset is required.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.898ecba881b2.I13eb69bb5af08b9ac33043647eaed6b8d50e8659@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
The wowlan info notification is quite big.
(~750 bytes without the wake packet itself).
The max FW notification size is ~2K.
There might be cases where the wake packet gets truncated because of
this limit.
Separating the wake packet from the wowlan info notification allows us to
get more data without trimming it.
Note: we currently limit the wake packet to 1600 bytes.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.06d1e6aecf10.Ib3d6a46ffe71d10cbc69bdb5654e6b14c28df245@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
IMR (Isolated Memory Regions) is a mechanism to protect memory regions
from unwarranted access by agents in the system that should not have access
to that memory.
When IMR is enabled, pages in the DRAM will be located within the IMR
memory space, accessible only by the device.
As a side effect, during S4 (a.k.a hibernate) the IMR memory space
is not retained.
While the DRAM is saved to the disk and restored by the OS upon resume,
the IMR, which is hidden from the OS neither saved upon suspend nor
restored upon resume.
As a consequence of the above, it turned out that commands cannot
be sent as part of the resume flow, and so after ending
d3 the FW needs to use notifications instead of cmd-resp.
The resume flow becomes asynchronous, with a series
of notifications, starting with wowlan_info_notif, through
wowlan_pkt_notif and complete the resume flow by d3_end_notif.
This patch adds the support for wowlan info notification.
The wake packet has been removed from the wowlan info struct
and will be handled in a dedicated notification.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.3ce8deefd929.Ieba8610e8bb4bec788076371ae38becb4a3d20d5@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
This code is dead, even old FW versions don't use it.
The IWL_D0I3_RESET_REQUIRE flag will be sent by the FW via a notification,
instead of command, the notification handler will be introduced later
in the series.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.87c82482229a.I70456c38ed8f7beb7d62dd618f58e7dc0a7d33b2@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
There's a bunch of duplicated code in the normal data RX and
the no-data RX paths, refactor that.
Note that we're evidently not implementing the 6 GHz band in
the no-data path correctly, need to fix that in firmware
first. Also, we were setting the NSS differently, keep doing
that, but just override the previous values.
Note also that we used to drop frames with bad rate data, to
simplify that just report rate 0 and continue.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.a81580d5e769.I3ee7a1fe1adf8684c48713dbbdc2cbc60bd24cd1@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Fix documentation issues reported by kernel-doc:
- Incorrect use of /** for non-kernel-doc comments
- Mismatch between documented and actual identifiers
- Incorrect identifier syntax
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220909151246.22961-1-quic_jjohnson@quicinc.com
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks. The new macros allow suspend
and resume functions to be automatically dropped without any #ifdef
guards.
Tested-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks. The new macros allow suspend
and resume functions to be automatically dropped without any #ifdef
guards.
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle