It's frankly a mess, and the confusion around plane_state->crtc/fb
that I fixed up in this series is the least of the problems. Add a
todo as a future note of how this could be done a lot better, and with
a lot less driver confusion.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-1-daniel.vetter@ffwll.ch
This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.
DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.
Version history:
v2: - rebased on top of drm-next-2019-11-27
- sort all include lines in all files
- remove all include <drm/drmP.h>
- remove select "select VIDEOMODE_HELPERS"
- call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
to call it in new modeset case as it is also called in vp_enable())
- change probe sequence and drm_device allocation (follow example in
drm_drv.c)
- use __maybe_unused instead of #ifdef for pm functions
- remove "struct drm_fbdev_cma *fbdev;" from driver data
- check panel connector type before connecting it
v3: no change
v4: no change
v5: - remove fifo underflow irq handling, it is not an error and
it should be used for debug purposes only
- memory tuning, prefetch plane fifo up to high-threshold value to
minimize possibility of underflows.
v6: - Check CTM and gamma support from dispc_features when creating crtc
- Implement CTM support for k2g and fix k3 CTM implementation
- Remove gamma property persistence and always write color properties
in a new modeset
v7: - Fix checkpatch.pl --strict issues
- Rebase on top of drm-misc-next-2020-01-10
v8: - Remove idle debug prints from dispc_init()
- Add Reviewed-by: Benoit Parrot <bparrot@ti.com>
v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
conflict exported omapfb function with same name
- Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone
Display SubSystem.
Version history:
v2: no change
v3: - reg-names: "wp" -> "wb"
- Add ports node
- Add includes to dts example
- reindent dts example
v4: - Add descriptions to reg, clocks, and interrupts properties
- Remove minItems when its value is the same as maxItems value
v5: - itemize reg, clocks and interrupts properties' descriptions
- there is no "vp" reg-name, only "wb" for write back
v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
Benoit Parrot <bparrot@ti.com>
v7: no change
v8: no change
v9: no change
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fcba52837808853a4b2bf729bd33bd986cbdadf4.1580129724.git.jsarha@ti.com
Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone
Display SubSystem.
Version history:
v2: no change
v3: - Add ports node
- use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems
- Add includes to dts example
- reindent dts example
v4: - Add descriptions to reg and clocks properties
- Remove minItems when its value is the same as maxItems value
v5: - itemize reg and clocks properties' descriptions
v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
Benoit Parrot <bparrot@ti.com>
v7: no change
v8: no change
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1799656fb8cc42ca698fc29bbc80c1bae442d6d3.1580129724.git.jsarha@ti.com
Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI
Keystone Display SubSystem.
Version history:
v2: no change
v3: - Add ports node
- Add includes to dts example
- reindent dts example
v4: - Add descriptions to reg and clocks properties
- Remove minItems when its value is the same as maxItems value
- Remove ports node
v5: - itemize reg and clocks properties' descriptions
v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
Benoit Parrot <bparrot@ti.com>
v7: no change
v8: no change
v9: - Remove ports-node from the dts example
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/270297321f0768c10e241d289e3ac10e39cf12a9.1580129724.git.jsarha@ti.com
heap buffer is used as output of GP and input of PP for
Mali Utgard GPU. Size of heap buffer depends on the task
so is a runtime variable.
Previously we just create a large enough buffer as heap
buffer. Now we add a heap buffer type to be able to
increase the backup memory dynamically when GP fail due
to lack of heap memory.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-4-yuq825@gmail.com
For dynamically mapping added backup memory of lima_bo to vm.
This is a preparation for adding heap buffer support.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-3-yuq825@gmail.com
Use drm_core_check_all_features() to ensure both the driver features and
the per-device driver features are taken into account when registering
debugfs files.
v3:
- files[i].driver_features == 0 actually means "don't care"
v2:
- use drm_core_check_all_features()
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123124801.14958-2-jani.nikula@intel.com
Add new drm_core_check_all_features() function to check for a mask of
features. All features in the mask are required.
Redefine existing drm_core_check_feature() in terms of this function,
using the drm_driver_feature enum for the parameter.
v3:
- add drm_core_check_all_features() (Thomas)
v2:
- fix kernel-doc (Ville)
- add an extra variable for clarity (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123124801.14958-1-jani.nikula@intel.com
The datasheet suggests 60 for tHFP, so let's adjust the number
accordingly.
This also makes the framerate be 60Hz as intended:
159916.0 * 1000 / ((1200 + 80 + 24 + 60)*(1920 + 20 + 4 + 10))
=> 60.00 Hz
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: e6d020eeef ("drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel")
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200125050256.107404-1-drinkcat@chromium.org
Since drm_global_mutex is a true global mutex across devices, we don't
want to acquire it unless absolutely necessary. For maintaining the
device local open_count, we can use atomic operations on the counter
itself, except when making the transition to/from 0. Here, we tackle the
easy portion of delaying acquiring the drm_global_mutex for the final
release by using atomic_dec_and_mutex_lock(), leaving the global
serialisation across the device opens.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124130107.125404-1-chris@chris-wilson.co.uk
The file is not part of the global drm resource and can be released
prior to take the global mutex to drop the open_count (and potentially
close) the drm device. As the global mutex is indeed global, not only
within the device but across devices, a slow file release mechanism can
bottleneck the entire system.
However, inside drm_close_helper() there are a number of dev->driver
callbacks that take the drm_device as the first parameter... Worryingly
some of those callbacks may be (implicitly) depending on the global
mutex.
v2: Drop the debug message for the open-count, it's included with the
drm_file_free() debug message -- and for good measure make that up as
reading outside of the mutex.
v3: Separate the calling of the filp cleanup outside of
drm_global_mutex into a new drm_release_noglobal() hook, so that we can
phase the transition. drm/savage relies on the global mutex, and there
may be more, so be cautious.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124125627.125042-1-chris@chris-wilson.co.uk
David Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight properties
Fix this by listing all allowed properties,
and do not allow other properties.
Fixes: abdd9e3705 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")
Reported-by: David Lechner <david@lechnology.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Cc: David Lechner <david@lechnology.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200120190249.GA9619@ravnborg.org
Convert all the 'simple' panels which match the constraints of the
common panel-simple.yaml schema. This conversion is based on how the
panels are documented. Some may turn out to be more complex once the
schema is applied to actual dts files.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119210907.24152-1-robh@kernel.org
Mention that the size of these two structs is determined by
max_payloads. Suggested by Ville Syrjälä.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-2-lyude@redhat.com
The issues caused by:
commit 64e62bdf04 ("drm/dp_mst: Remove VCPI while disabling topology
mgr")
Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.
The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.
The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.
I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.
Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
vsyrjala
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Add new struct drm_device based WARN* macros. These are modeled after
the core kernel device based WARN* macros. These would be preferred
over the regular WARN* macros, where possible.
These macros include device information in the backtrace, so we know
what device the warnings originate from.
Knowing the device specific information in the backtrace would be
helpful in development all around.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-2-pankaj.laxminarayan.bharadiya@intel.com
As we move the ttm_bo_individualize_resv() upwards, we need flush the
copied fence too. Otherwise the driver keeps waiting for fence.
run&Kill kfdtest, then perf top.
25.53% [ttm] [k] ttm_bo_delayed_delete
24.29% [kernel] [k] dma_resv_test_signaled_rcu
19.72% [kernel] [k] ww_mutex_lock
Fix: 378e2d5b("drm/ttm: fix ttm_bo_cleanup_refs_or_queue once more")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/72339/
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/drm_dp_mst_topology.c:3693:16: warning: variable
‘origlen’ set but not used [-Wunused-but-set-variable]
int replylen, origlen, curreply;
It looks like never use variable origlen after assign value to it.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200118080628.mxcx7bfwdas5m7un@kaowomen.cn
Currently, the interrupt lines requested by Panfrost
use unmeaningful names, which adds some obscurity
to interrupt introspection (i.e. any tool based
on procfs' interrupts file).
In order to improve this, prefix each requested
interrupt with the module name: panfrost-{gpu,job,mmu}.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191214045952.9452-1-ezequiel@collabora.com
Explicit management of the GPU's core stacks is only necessary in the
case of a broken integration with the PDC. Since there are no known
platforms which have such a broken integration let's remove the explicit
control from the driver since this apparently causes problems on other
platforms and will have a small performance penality.
The out of tree mali_kbase driver contains this text regarding
controlling the core stack (CONFIGMALI_CORESTACK):
Enabling this feature on supported GPUs will let the driver powering
on/off the GPU core stack independently without involving the Power
Domain Controller. This should only be enabled on platforms which
integration of the PDC to the Mali GPU is known to be problematic.
This feature is currently only supported on t-Six and t-HEx GPUs.
If unsure, say N.
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109133104.11661-1-steven.price@arm.com
We've added a set of new APIs to manipulate syncobjs holding timelines
of dma_fence. This adds a bit of documentation about how this works.
v2: Small language nits (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/348578/
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: David(ChunMing) Zhou <David1.Zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Add support for the Okaya RH128128T display to the st7735r driver on
DT-enabled systems.
The RH128128T is a 128x128 1.44" TFT display driven by a Sitronix
ST7715R TFT Controller/Driver. The latter is very similar to the
ST7735R, and can be handled by the existing st7735r driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-6-geert+renesas@glider.be
Currently the st7735r driver supports only a single display panel.
Prepare for adding support for other display panels by factoring out the
display-specific parameters in struct st7735r_cfg.
For now, the following parameters can be configured:
- Display resolution,
- Horizontal/vertical display offsets,
- Read-write versus read-only controllers,
- RGB versus BGR color component ordering.
Rename jd_t18003_t01_pipe_enable() and jd_t18003_t01_pipe_funcs() to
st7735r_pipe_enable() resp. st7735r_pipe_funcs(), as they are not really
specific to the Jianda JD-T18003-T01 display anymore.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-5-geert+renesas@glider.be
If the resolution of the TFT display is smaller than the maximum
resolution supported by the display controller, the display may be
connected to the driver output arrays with a horizontal and/or vertical
offset, leading to a shifted image.
Add support for specifying these offsets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-4-geert+renesas@glider.be
Document support for the Okaya RH128128T display, which is a 128x128
1.44" TFT display driven by a Sitronix ST7715R TFT Controller/Driver.
It can be found on e.g. the Renesas YRSK-LCD-PMOD extension board, which
comes with various Renesas development kits (e.g. Renesas Starter Kit+
for RZ/A1H[1]).
ST7715R and ST7735R are very similar. Their major difference is that
the former is restricted to displays of up to 132x132 pixels, while the
latter supports displays up to 132x162 pixels.
[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-3-geert+renesas@glider.be
Convert the DT binding documentation for Sitronix ST7735R displays to DT
schema.
Add a reference to the Adafruit 1.8" LCD while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-2-geert+renesas@glider.be
Shenzhen Feixin Photoelectics Co., Ltd is a company to provide LCD
modules.
Add its vendor prefix.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116033636.512461-2-icenowy@aosc.io
Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-6-jitao.shi@mediatek.com
Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-5-jitao.shi@mediatek.com
Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na",
"boe,tv101wum-n53" and "auo,b101uan08.3" panels.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
[dropped Rob from list of maintainers - verified on irc]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-2-jitao.shi@mediatek.com
Another completely unused feature.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/348265/
Daniel Vetter