Commit Graph

4 Commits

Author SHA1 Message Date
Andy Yan e9e79d5395 ARM: dts: rockchip: use pin constants to describe gpios
Use macros to describe gpios will make the dts easier to
read and write.

All the modifications done with sed:

sed -i -e 's/ 0  GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 1  GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 2  GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
.......
.......
sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*

Tested with:

for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i);  done

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[also adapted the gpio interrupts]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-02 14:25:19 +01:00
Javier Martinez Canillas 0b639b815f ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards
This patch fixes the following DTC warnings:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-16 02:42:43 +02:00
Randy Li 7693df8319 ARM: dts: rockchip: add missing regulators for firefly reload board
There are many regulators are missed in previous commit, this
commit complete most of them. It also fix some mistakes in the
regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better
to keep in always-on state, as it is used as the USB PHY supply,
corretly we have no way to assign power supply to a USB PHY.
The VCCA_33(REG8) should be enabled or the GMAC won't work.

It also fix the wrong properties for audio in io-domains, the supply
connected to APIO4_VDD is different to firefly release version.

Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 18:21:01 +02:00
Randy Li 4421db1c2b ARM: dts: rockchip: add rk3288-firefly-reload
The Firefly RK3288 Reload is a combination Firefly rk3288 core board
with the Reload baseboard. Add a dtsi for the Firefly rk3288 core
which can be included into the dts for the various baseboards
in the future and dts for Reload base board.

Currently supported are serial console, wired networking, eMMC and
SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only
the OTG could work on the host mode now, the other USB host can't
work now, additional patches are required.

Signed-off-by: Randy Li <ayaka@soulik.info>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-08 10:56:55 +02:00