build_path_from_dentry() open-codes dentry_path_raw(). The reason
we can't use dentry_path_raw() in there (and postprocess the
result as needed) is that the callers of build_path_from_dentry()
expect that the object to be freed on cleanup and the string to
be used are at the same address. That's painful, since the path
is naturally built end-to-beginning - we start at the leaf and
go through the ancestors, accumulating the pathname.
Life would be easier if we left the buffer allocation to callers.
It wouldn't be exact-sized buffer, but none of the callers keep
the result for long - it's always freed before the caller returns.
So there's no need to do exact-sized allocation; better use
__getname()/__putname(), same as we do for pathname arguments
of syscalls. What's more, there's no need to do allocation under
spinlocks, so GFP_ATOMIC is not needed.
Next patch will replace the open-coded dentry_path_raw() (in
build_path_from_dentry_optional_prefix()) with calling the real
thing. This patch only introduces wrappers for allocating/freeing
the buffers and switches to new calling conventions:
build_path_from_dentry(dentry, buf)
expects buf to be address of a page-sized object or NULL,
return value is a pathname built inside that buffer on success,
ERR_PTR(-ENOMEM) if buf is NULL and ERR_PTR(-ENAMETOOLONG) if
the pathname won't fit into page. Note that we don't need to
check for failure when allocating the buffer in the caller -
build_path_from_dentry() will do the right thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Trivial change to clarify code in smb2_is_network_name_deleted
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When server returns error STATUS_NETWORK_NAME_DELETED, TCON
must be marked for reconnect. So, subsequent IO does the tree
connect again.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introduced a new field conn_id in TCP_Server_Info structure.
This is a non-persistent unique identifier maintained by the client
for a connection to a file server. For this, a global counter named
tcpSesNextId is maintained. On allocating a new TCP_Server_Info,
this counter is incremented and assigned.
Changed the dynamic tracepoints related to reconnects and
crediting to be more informative (with conn_id printed).
Debugging a crediting issue helped me understand the
important things to print here.
Always call dynamic tracepoints outside the scope of spinlocks.
To do this, copy out the credits and in_flight fields of the
server struct before dropping the lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to share the CIFS_NEG_OP flag between negotiate and
session authentication. There was an assumption in the code that
CIFS_NEG_OP is used by negotiate only. So introcuded CIFS_SESS_OP
and used it for session setup optypes.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix passing of the additional security info via version
operations. Force new open when getting SACL and avoid
reuse of files that were previously open without
sufficient privileges to access SACLs.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SYSTEM_SECURITY access flag and use with smb2 when opening
files for getting/setting SACLs. Add "system.cifs_ntsd_full"
extended attribute to allow user-space access to the functionality.
Avoid multiple server calls when setting owner, DACL, and SACL.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is at least one suspected bug in crediting changes in cifs.ko
which has come up a few times in the discussions and in a customer
case.
This change adds tracepoints to the code which modifies the server
credit values in any way. The goal is to be able to track the changes
to the credit values of the session to be able to catch when there is
a crediting bug.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Harmonize and change all such variables to 'ctx', where possible.
No changes to actual logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mounts to Azure cause an unneeded warning message in dmesg
"CIFS: VFS: parse_server_interfaces: incomplete interface info"
Azure rounds up the size (by 8 additional bytes, to a
16 byte boundary) of the structure returned on the query
of the server interfaces at mount time. This is permissible
even though different than other servers so do not log a warning
if query network interfaces response is only rounded up by 8
bytes or fewer.
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For an operation compounded with an SMB2 CREATE request, client must set
COMPOUND_FID(0xFFFFFFFFFFFFFFFF) to FileID field of smb2 ioctl.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Fixes: 2e4564b31b ("smb3: add support stat of WSL reparse points for special file types")
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mid callback needs to be called only when valid data is
read into pages.
These patches address a problem found during decryption offload:
CIFS: VFS: trying to dequeue a deleted mid
that could cause a refcount use after free:
Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
When reconnect happens Mid queue can be corrupted when both
demultiplex and offload thread try to dequeue the MID from the
pending list.
These patches address a problem found during decryption offload:
CIFS: VFS: trying to dequeue a deleted mid
that could cause a refcount use after free:
Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two unused variables in commit
"add support for stat of WSL reparse points for special file types"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with modefromsid mount option, it was possible to
get the error on stat of a fifo or char or block device:
"cannot stat <filename>: Operation not supported"
Special devices can be stored as reparse points by some servers
(e.g. Windows NFS server and when using the SMB3.1.1 POSIX
Extensions) but when the modefromsid mount option is used
the client attempts to get the ACL for the file which requires
opening with OPEN_REPARSE_POINT create option.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
TCP server info field server->total_read is modified in parallel by
demultiplex thread and decrypt offload worker thread. server->total_read
is used in calculation to discard the remaining data of PDU which is
not read into memory.
Because of parallel modification, server->total_read can get corrupted
and can result in discarding the valid data of next PDU.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 crediting is used for flow control, and it can be useful to
trace for problem determination how many credits were acquired
and for which operation.
Here is an example ("trace-cmd record -e *add_credits"):
cifsd-9522 [010] .... 5995.202712: smb3_add_credits:
server=localhost current_mid=0x12 credits=373 credits_to_add=10
cifsd-9522 [010] .... 5995.204040: smb3_add_credits:
server=localhost current_mid=0x15 credits=400 credits_to_add=30
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In crypt_message, when smb2_get_enc_key returns error, we need to
return the error back to the caller. If not, we end up processing
the message further, causing a kernel oops due to unwarranted access
of memory.
Call Trace:
smb3_receive_transform+0x120/0x870 [cifs]
cifs_demultiplex_thread+0xb53/0xc20 [cifs]
? cifs_handle_standard+0x190/0x190 [cifs]
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that 256 bit encryption can be negotiated, update
names of the nonces to match the updated official protocol
documentation (e.g. AES_GCM_NONCE instead of AES_128GCM_NONCE)
since they apply to both 128 bit and 256 bit encryption.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently STATUS_IO_TIMEOUT is not treated as retriable error.
It is currently mapped to ETIMEDOUT and returned to userspace
for most system calls. STATUS_IO_TIMEOUT is returned by server
in case of unavailability or throttling errors.
This patch will map the STATUS_IO_TIMEOUT to EAGAIN, so that it
can be retried. Also, added a check to drop the connection to
not overload the server in case of ongoing unavailability.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cleanup patch for followon to cache additional information for the root directory
when directory lease held.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.
=============================================================================
BUG kmalloc-16 (Not tainted): Redzone overwritten
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
INFO: Object 0x6f171df3 @offset=352 fp=0x00000000
Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi
Redzone 79e69a6f: 73 68 32 0a sh2.
Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
dump_stack+0x54/0x6e
print_trailer+0x12c/0x134
check_bytes_and_report.cold+0x3e/0x69
check_object+0x18c/0x250
free_debug_processing+0xfe/0x230
__slab_free+0x1c0/0x300
kfree+0x1d3/0x220
smb2_set_ea+0x27d/0x540
cifs_xattr_set+0x57f/0x620
__vfs_setxattr+0x4e/0x60
__vfs_setxattr_noperm+0x4e/0x100
__vfs_setxattr_locked+0xae/0xd0
vfs_setxattr+0x4e/0xe0
setxattr+0x12c/0x1a0
path_setxattr+0xa4/0xc0
__ia32_sys_lsetxattr+0x1d/0x20
__do_fast_syscall_32+0x40/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
Fixes: 5517554e43 ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
read permission, not just read attributes permission, is required
on the directory.
See MS-SMB2 (protocol specification) section 3.3.5.19.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> # v5.6+
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When punch hole success, we also can read old data from file:
# strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \
-c "fpunch 20 40" -c"pread 20 40" file
pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0
pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page caches not updated, then the
local page caches inconsistent with server.
Also can be found by xfstests generic/316.
So, we need to remove the page caches before send the SMB
ioctl(FSCTL_SET_ZERO_DATA) to server.
Fixes: 31742c5a33 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page cache not update, then the data
inconsistent with server, which leads the xfstest generic/008 failed.
So we need to remove the local page caches before send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will
re-cache it.
Fixes: 30175628bf ("[SMB3] Enable fallocate -z support for SMB3 mounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: Steve French <stfrench@microsoft.com>
open_shroot() invokes kref_get(), which increases the refcount of the
"tcon->crfid" object. When open_shroot() returns not zero, it means the
open operation failed and close_shroot() will not be called to decrement
the refcount of the "tcon->crfid".
The reference counting issue happens in one normal path of
open_shroot(). When the cached root have been opened successfully in a
concurrent process, the function increases the refcount and jump to
"oshr_free" to return. However the current return value "rc" may not
equal to 0, thus the increased refcount will not be balanced outside the
function, causing a refcnt leak.
Fix this issue by setting the value of "rc" to 0 before jumping to
"oshr_free" label.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAl7aelsACgkQiiy9cAdy
T1HDmwv9Fj6OaXXx+btNvbB6xTWvCwMVKHwTPURMx+IjBYjJC65yPGkInPPkfUVo
7L9h55XCLwFohECleZJCkKOrJtnX1P8SsHtZck6QqjvUETJl/L3pAXpMMYACHLpg
x4DE/NFkcW95J38s9Jtjhphq8ZGUhuDhaT+QeEd2Iq8HzAxk5ND47ZXkomMx1EEM
ZsOrmJF+k2YQyDDpfhJeVF5iZDkbpASqA/TlLxxGH34IdAZIUB9qtGKADNLZ6YyT
qpG601CSrEdl3tVY+SlRMHqwVTRhCViPD6Q3fMw8Xha436RIiWJJ4Rvn6bSP/ZQl
PDPuSVRB2zmd70C/3ojXdku9+VfQLO52qkO3bf2IjgVJ3ARrxFxW7cb7bmYRqdyT
WI5N1+8gETrIAK7aB3QKdmkcRFDtJD3wOTfBcgctuB8WrYrDvW2MNKkPbQdY5tnN
xfp4f10Dg4d+/8knSytJrdKkDublU0kGbfLAa0oupjAzV6WB0qNt0TNGxE42L+ug
iFSJOZxi
=gCcP
-----END PGP SIGNATURE-----
Merge tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"22 changesets, 2 for stable.
Includes big performance improvement for large i/o when using
multichannel, also includes DFS fixes"
* tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
cifs: update internal module version number
cifs: multichannel: try to rebind when reconnecting a channel
cifs: multichannel: use pointer for binding channel
smb3: remove static checker warning
cifs: multichannel: move channel selection above transport layer
cifs: multichannel: always zero struct cifs_io_parms
cifs: dump Security Type info in DebugData
smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K
smb3: default to minimum of two channels when multichannel specified
cifs: multichannel: move channel selection in function
cifs: fix minor typos in comments and log messages
smb3: minor update to compression header definitions
cifs: minor fix to two debug messages
cifs: Standardize logging output
smb3: Add new parm "nodelete"
cifs: move some variables off the stack in smb2_ioctl_query_info
cifs: reduce stack use in smb2_compound_op
cifs: get rid of unused parameter in reconn_setup_dfs_targets()
cifs: handle hostnames that resolve to same ip in failover
cifs: set up next DFS target before generic_ip_connect()
...
Move the channel (TCP_Server_Info*) selection from the tranport
layer to higher in the call stack so that:
- credit handling is done with the server that will actually be used
to send.
* ->wait_mtu_credit
* ->set_credits / set_credits
* ->add_credits / add_credits
* add_credits_and_wake_if
- potential reconnection (smb2_reconnect) done when initializing a
request is checked and done with the server that will actually be
used to send.
To do this:
- remove the cifs_pick_channel() call out of compound_send_recv()
- select channel and pass it down by adding a cifs_pick_channel(ses)
call in:
- smb311_posix_mkdir
- SMB2_open
- SMB2_ioctl
- __SMB2_close
- query_info
- SMB2_change_notify
- SMB2_flush
- smb2_async_readv (if none provided in context param)
- SMB2_read (if none provided in context param)
- smb2_async_writev (if none provided in context param)
- SMB2_write (if none provided in context param)
- SMB2_query_directory
- send_set_info
- SMB2_oplock_break
- SMB311_posix_qfs_info
- SMB2_QFS_info
- SMB2_QFS_attr
- smb2_lockv
- SMB2_lease_break
- smb2_compound_op
- smb2_set_ea
- smb2_ioctl_query_info
- smb2_query_dir_first
- smb2_query_info_comound
- smb2_query_symlink
- cifs_writepages
- cifs_write_from_iter
- cifs_send_async_read
- cifs_read
- cifs_readpages
- add TCP_Server_Info *server param argument to:
- cifs_send_recv
- compound_send_recv
- SMB2_open_init
- SMB2_query_info_init
- SMB2_set_info_init
- SMB2_close_init
- SMB2_ioctl_init
- smb2_iotcl_req_init
- SMB2_query_directory_init
- SMB2_notify_init
- SMB2_flush_init
- build_qfs_info_req
- smb2_hdr_assemble
- smb2_reconnect
- fill_small_buf
- smb2_plain_req_init
- __smb2_plain_req_init
The read/write codepath is different than the rest as it is using
pages, io iterators and async calls. To deal with those we add a
server pointer in the cifs_writedata/cifs_readdata/cifs_io_parms
context struct and set it in:
- cifs_writepages (wdata)
- cifs_write_from_iter (wdata)
- cifs_readpages (rdata)
- cifs_send_async_read (rdata)
The [rw]data->server pointer is eventually copied to
cifs_io_parms->server to pass it down to SMB2_read/SMB2_write.
If SMB2_read/SMB2_write is called from a different place that doesn't
set the server field it will pick a channel.
Some places do not pick a channel and just use ses->server or
cifs_ses_server(ses). All cifs_ses_server(ses) calls are in codepaths
involving negprot/sess.setup.
- SMB2_negotiate (binding channel)
- SMB2_sess_alloc_buffer (binding channel)
- SMB2_echo (uses provided one)
- SMB2_logoff (uses master)
- SMB2_tdis (uses master)
(list not exhaustive)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_read/SMB2_write check and use cifs_io_parms->server, which might
be uninitialized memory.
This change makes all callers zero-initialize the struct.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range. This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move some large data structures off the stack and into dynamically
allocated memory in the function smb2_ioctl_query_info
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_open_init() expects a pre-initialised lease_key when opening a
file with a lease, so set pfid->lease_key prior to calling it in
open_shroot().
This issue was observed when performing some DFS failover tests and
the lease key was never randomly generated.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
The packet size needs to take account of SMB2 header size and possible
encryption header size. This is only done when signing is used and it is for
RDMA send/receive, not read/write.
Also remove the dead SMBD code in smb2_negotiate_r(w)size.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
xfstests generic/228 checks if fallocate respect RLIMIT_FSIZE.
After fallocate mode 0 extending enabled, we can hit this failure.
Fix this by check the new file size with vfs helper, return
error if file size is larger then RLIMIT_FSIZE(ulimit -f).
This patch has been tested by LTP/xfstests aginst samba and
Windows server.
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
allows SMB2_open() callers to pass down a POSIX data buffer that will
trigger requesting POSIX create context and parsing the response into
the provided buffer.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.
Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...
Open files: 0 total (local), 1 open on server
^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.
In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.
I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.
I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Al Viro