Now that rdma_copy_addr() only copies the source addresses and all callers
are interested in copying only source addresses, simplify it to drop the
destination address argument.
Given that it only copies source layer2 addresses, rename it to
rdma_copy_src_l2_addr for better code readability.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_translate_ip() is done while resolving address for the loopback
addresses. The current flow is convoluted with resolve neighbor being
optional.
This patch simplifies the code in following ways.
(a) Use common code between IPv4 and IPv6 for address translation,
loopback checks and acquiring netdevice.
(b) During neigh resolve in addr_resolve_neigh(), only copy destination
address.
(c) Always resolve the source address before the destination address,
because it doesn't depend on resolving neigh being requested or not.
This helps to reduce 3 calls of rdma_copy_addr and rdma_translate_ip to
one and makes it easier to follow the code flow.
Now that ib_nl_fetch_ha() doesn't depend on dst, drop dst argument from
ib_nl_fetch_ha().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current code typecasts destination address using extra variable but uses
source address as is.
Even though the compiler optimizes such code well, just let each protocol
specific function typecast for src and dest both and have symmetric code.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
addr4_resolve() and addr6_resolve() are called by checking the value of
sa_family.
Both above functions overwrite the value after typecasting, this is not
necessary.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This fixes two issues:
1. When address family is other than IPv4 or v6, rdma_translate_ip()
returns success which is incorrect.
2. When address familty is AF_INET6, and if the source address is not
found, it returns success, which is also incorrect.
Therefore, introduce and use rdma_find_ndev_for_src_ip_rcu() helper
function which returns correct success or error status and is also useful
for future code refactor in addr_resolve().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The transition is allowed from any state and the atrribute mask must be
IB_QP_STATE.
Fixes: c32a4f296e ("IB/mlx5: Add support for DC Initiator QP")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HFI IRQ enable bits are not being set correctly. Send context error and
DC IRQs are not being enabled correctly. In addition, send context error
IRQs are not being delivered.
Because of this, send context errors are not being handled correctly when
they occur.
When setting the IRQ bits, if an IRQ range is used, and the last bit is on
a register boundary (bit 63), the calculated index for the final register
modification is incorrect (index + 1 vs. index).
The incorrect index calculation causes incorrect IRQ bits to be set. In
this case the send context error IRQ is NOT enabled.
Fix by using the 'last' value rather than the counted 'src' value to
determine the final index to use. This satisfies all cases.
Fixes: a2f7bbdc2d ("IB/hfi1: Rework the IRQ API to be more flexible")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the set_txreq_header_agh() function returns an error, the exit path
is chosen.
In this path, the code fails to set the return value. This will cause
the caller to not realize an error has occurred.
Set the return value correctly in the error path.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Hardware limits the maximum number of packets to u16 packets.
Match that size for all relevant sequence numbers in the user_sdma
engine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Packet queue state is over used to determine SDMA descriptor
availablitity and packet queue request state.
cpu 0 ret = user_sdma_send_pkts(req, pcount);
cpu 0 if (atomic_read(&pq->n_reqs))
cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE)
cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE);
At this point pq->n_reqs == 0 and pq->state is incorrectly
SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state
to return to _INACTIVE.
This can also change the state from _DEFERRED to _ACTIVE. However,
this is a mostly benign race.
Remove the racy code path.
Use n_reqs to determine if a packet queue is active or not.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pq_update() can only be called in two places: from the completion
function when the complete (npkts) sequence of packets has been
submitted and processed, or from setup function if a subset of the
packets were submitted (i.e. the error path).
Currently both paths can call pq_update() if an error occurrs. This
race will cause the n_req value to go negative, hanging file_close(),
or cause a crash by freeing the txlist more than once.
Several variables are used to determine SDMA send state. Most of
these are unnecessary, and have code inspectible races between the
setup function and the completion function, in both the send path and
the error path.
The request 'status' value can be set by the setup or by the
completion function. This is code inspectibly racy. Since the status
is not needed in the completion code or by the caller it has been
removed.
The request 'done' value races between usage by the setup and the
completion function. The completion function does not need this.
When the number of processed packets matches npkts, it is done.
The 'has_error' value races between usage of the setup and the
completion function. This can cause incorrect error handling and leave
the n_req in an incorrect value (i.e. negative).
Simplify the code by removing all of the unneeded state checks and
variables.
Clean up iovs node when it is freed.
Eliminate race conditions in the error path:
If all packets are submitted, the completion handler will set the
completion status correctly (ok or aborted).
If all packets are not submitted, the caller must wait until the
submitted packets have completed, and then set the completion status.
These two change eliminate the race condition in the error path.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The post_send() path determines if it should post directly or, schedule
the post for later. The current logic is:
if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold
post the send
else
schedule
This can allow large requests to call the send engine directly. Large
requests can potentially produce a large number of packets prior to
returning to the caller, blocking the caller from posting more requests,
and allowing better parallel processing.
Allow the driver(s) more say in this logic (pass call_send to the driver,
rather than examining a return value).
Update hfi1/qib logic to schedule the send engine if an RC or UC message
is larger than the QP MTU size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
debugfs_remove has taken the IS_ERR_OR_NULL into account. Just remove the
unnecessary condition.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently a matcher can only be created and attached to a NIC RX flow
table. Extend it to allow it on NIC TX flow tables as well.
In order to achieve that, we:
1) Expose a new attribute: MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS.
enum ib_flow_flags is used as valid flags. Only
IB_FLOW_ATTR_FLAGS_EGRESS is supported.
2) Remove the requirement to have a DEVX or QP destination when creating a
flow. A flow added to NIC TX flow table will forward the packet outside
of the vport (Wire or E-Switch in the SR-iOV case).
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the ability to get a NIC TX flow table when using _get_flow_table().
This will allow to create a matcher and a flow rule on the NIC TX path.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support attaching flow actions to a flow rule via raw create flow.
For now only NIC RX path is supported. This change requires to export
flow resources management functions so we can maintain proper bookkeeping
of flow actions.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move struct mlx5_flow_act to be passed from the method entry point,
this will allow to add support for flow action for the raw create flow
path.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We support only a single action type per flow rule, in case the user passes
the same type of flow actions fail the flow creation.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make the parsing of flow actions more generic so it could be used by
mlx5 raw create flow.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use ib_set_flow() when initializing flow related resources.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Methods sometimes need to get a flexible set of IDRs and not a strict set
as can be achieved today by the conventional IDR attribute. Add a new
IDRS_ARRAY attribute to the generic uverbs ioctl layer.
IDRS_ARRAY points to array of idrs of the same object type and same access
rights, only write and read are supported.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>``
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any matching rules will be mutated based on the packet reformat context
which is attached to that given flow rule.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A L3_TUNNEL_TO_L2 decap flow action requires to enable the encap bit on
the flow table, enable it if supported. This will allow to attach those
flow actions to NIC RX steering. We don't enable if running on a
representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any matching packet will be stripped of it's VXLAN tunnel, only the inner
L2 onward is left. The user will receive the decapsulated packet.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If NIC RX flow tables support decap operation, enable it on creation,
This allows to perform decapsulation of tunnelled packets by steering
rules. If NIC TX flow tables support reformat operation, enable it on
creation.
We don't enable those capabilities on representors as the E-Switch should
handle packet modification (can be configured via TC) and as current
hardware can't handle both FDB and NIC flow tables with decap/packet
reformat support.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When creating a flow steering rule, allow the user to attach a modify
header action.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just like ingress steering, allow a user to create steering rules that
match egress vport traffic. We expose the same number of priorities as
the bypass (NIC RX) steering.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add helpful warning for RDMA consumer implementers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code audit suggests that the RDMA CM event handler callback function is
_always_ invoked in a context that is safe to block. That's important for
consumer implementers to know, so document that in the comment before
rdma_create_id (where the handler function is set up by the consumer).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Even though device->ifindex is assigned before adding the device in the
list which is read by netlink flow, it is better to assign rdma device
index before publishing the device in the system to users and clients.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During register_device() init sequence is,
(a) register with rdma cgroup followed by
(b) register with sysfs
Therefore, unregister_device() sequence should follow the reverse order.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lockdep engine handles correctly downgrade of locks and it simply
incorrect to disable lockdep checks prior to calling mmu_notifier.
Remove lockdep_off and ensure locks correctness.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Even though device registration/unregistration and client
registration/unregistration is not a performance path, define the
client_data_lock as rwlock for code clarity.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
add_client_context(), ib_unregister_device() and ib_unregister_client()
are designed to call from blocking context. There is no need to save and
restore last interrupt state when called from such blocking context. Even
though this is not a performance path, using the right spin lock API is
desired for code clarity.
To avoid checkpatch warning while removing flags, sizeof() is used.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While unregistering a device, remove the context elements from the list to
not have any stale entries. With that any errors/bugs can be checked when
device is freed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While traversing client_data_list in following conditions, linked list is
only read, no elements of the list are removed. Therefore, use
list_for_each_entry(), instead of list_for_each_safe().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While unregistering a client, only context removal should be protected
with lock. There is no need to protect a freeing of such context which is
already removed from the list.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently rdma_addr_cancel() is an async operation, which notifies that
cancel is done by executing the callback function given during
rdma_resolve_ip(). If resolve_ip request is already completed than
callback is not executed.
Instead, now rdma_resolve_addr() and rdma_addr_cancel() simplified in
following ways.
1. rdma_addr_cancel() now a synchronous method. If request was
pending, after it is cancelled, no callback is notified.
2. rdma_resolve_addr() and respective addr_handler() callback doesn't
need to hold reference to cm_id.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While registering a mad agent, a user space can trigger various errors
and flood the logs.
Therefore, decrease verbosity and rate limit such error messages.
While we are at it, use __func__ to print function name.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is illegal to change MTU to a value lower than the minimum MTU
stated in ethernet spec. In addition to that we need to add 4 bytes
for encapsulation header (IPOIB_ENCAP_LEN).
Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't.
Signed-off-by: Muhammad Sammar <muhammads@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mdev->state device state is not protected by the QP for which WRs are
being processed. Therefore, there is no need to hold spin lock while
checking mdev state.
Given that device fatal error is unlikely situation, wrap the condition
check with unlikely().
Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs
to be generated. Therefore, check for device fatal error before
processing QP1 work requests.
Fixes: 89ea94a7b6 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When requested QP type is not supported for a {device, port}, return the
error right away before validating all parameters during mad agent
registration time.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on rdma.git 'for-rc' of
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/
Pull 'uverbs_dev_cleanups' from Leon Romanovsky:
====================
Reuse the char device code interfaces to simplify ib_uverbs_device
creation and destruction. As part of this series, we are sending fix to
cleanup path, which was discovered during internal review,
The fix definitely can go to -rc, but it means that this series will be
dependent on rdma-rc.
====================
* branch 'uverbs_dev_cleanups':
RDMA/uverbs: Use device.groups to initialize device attributes
RDMA/uverbs: Use cdev_device_add() instead of cdev_add()
RDMA/core: Depend on device_add() to add device attributes
RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one()
Resolved conflict in ib_device_unregister_sysfs()
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of explicitly adding device attribute files and handling such
error conditions, depend on device core layer to create device attributes
files based group pointer NULL terminated array.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of doing two step process to add char device and create underlying
device, use cdev_device_add() which does both.
Currently a kobject per uverbs_device is created to keep reference to its
holding ib_uverbs_device in addition to its underlying device 'dev'.
Instead just use uverbs_device->dev to keep a reference to.
With this change there is single reference tracker for ib_uverbs_device
structure.
This allows for subsequent patch to registers group attribute as well
using single API cdev_device_add().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of adding/removing device attribute files, depend on device_add()
which considers adding these device files based on NULL terminated
attributes group array.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If ib_uverbs_create_uapi() fails, dev_num should be freed from the bitmap.
Fixes: 7d96c9b176 ("IB/uverbs: Have the core code create the uverbs_root_spec")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
1. DMA-able memory allocated for Shadow QP was not being freed.
2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was
erroneously pointing to the RQ. But since the corresponding
free_qp_hdr_buf() was correct, memory being free was less than what was
allocated.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reuse existing get_device() API to do it symmetric to already used
put_device() in commit 924b8900a4 ("RDMA/core: Replace open-coded
variant of put_device")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit