Currently cma areas without a fixed base are allocated close to the end of
the node. This placement is sub-optimal because of compaction: it brings
pages into the cma area. In particular, it can bring in hot executable
pages, even if there is a plenty of free memory on the machine. This
results in cma allocation failures.
Instead let's place cma areas close to the beginning of a node. In this
case the compaction will help to free cma areas, resulting in better cma
allocation success rates.
If there is enough memory let's try to allocate bottom-up starting with
4GB to exclude any possible interference with DMA32. On smaller machines
or in a case of a failure, stick with the old behavior.
16GB vm, 2GB cma area:
With this patch:
[ 0.000000] Command line: root=/dev/vda3 rootflags=subvol=/root systemd.unified_cgroup_hierarchy=1 enforcing=0 console=ttyS0,115200 hugetlb_cma=2G
[ 0.002928] hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
[ 0.002930] cma: Reserved 2048 MiB at 0x0000000100000000
[ 0.002931] hugetlb_cma: reserved 2048 MiB on node 0
Without this patch:
[ 0.000000] Command line: root=/dev/vda3 rootflags=subvol=/root systemd.unified_cgroup_hierarchy=1 enforcing=0 console=ttyS0,115200 hugetlb_cma=2G
[ 0.002930] hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
[ 0.002933] cma: Reserved 2048 MiB at 0x00000003c0000000
[ 0.002934] hugetlb_cma: reserved 2048 MiB on node 0
v2:
- switched to memblock_set_bottom_up(true), by Mike
- start with 4GB, by Mike
[guro@fb.com: whitespace fix, per Mike]
Link: https://lkml.kernel.org/r/20201221170551.GB3428478@carbon.DHCP.thefacebook.com
[guro@fb.com: fix 32-bit warnings]
Link: https://lkml.kernel.org/r/20201223163537.GA4011967@carbon.DHCP.thefacebook.com
[guro@fb.com: fix 32-bit systems]
[akpm@linux-foundation.org: build fix]
Link: https://lkml.kernel.org/r/20201217201214.3414100-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Wonhyuk Yang <vvghjk1234@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh pointed out that the gma500 driver uses shmem pages, but needs to
limit them to the DMA32 zone. Ensure the allocations resulting from the
gfp_mask returned by limit_gfp_mask use the zone flags that were
originally passed to shmem_getpage_gfp.
Link: https://lkml.kernel.org/r/20210224121016.1314ed6d@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently if thp enabled=[madvise], mounting a tmpfs filesystem with
huge=always and mmapping files from that tmpfs does not result in
khugepaged collapsing those mappings, despite the mount flag indicating
that it should.
Fix that by breaking up the blocks of tests in hugepage_vma_check a little
bit, and testing things in the correct order.
Link: https://lkml.kernel.org/r/20201124194925.623931-4-riel@surriel.com
Fixes: c2231020ea ("mm: thp: register mm for khugepaged when merging vma for shmem")
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox pointed out that the i915 driver opportunistically
allocates tmpfs memory, but will happily reclaim some of its pool if no
memory is available.
Make sure the gfp mask used to opportunistically allocate a THP is always
at least as restrictive as the original gfp mask.
Link: https://lkml.kernel.org/r/20201124194925.623931-3-riel@surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm,thp,shm: limit shmem THP alloc gfp_mask", v6.
The allocation flags of anonymous transparent huge pages can be controlled
through the files in /sys/kernel/mm/transparent_hugepage/defrag, which can
help the system from getting bogged down in the page reclaim and
compaction code when many THPs are getting allocated simultaneously.
However, the gfp_mask for shmem THP allocations were not limited by those
configuration settings, and some workloads ended up with all CPUs stuck on
the LRU lock in the page reclaim code, trying to allocate dozens of THPs
simultaneously.
This patch applies the same configurated limitation of THPs to shmem
hugepage allocations, to prevent that from happening.
This way a THP defrag setting of "never" or "defer+madvise" will result in
quick allocation failures without direct reclaim when no 2MB free pages
are available.
With this patch applied, THP allocations for tmpfs will be a little more
aggressive than today for files mmapped with MADV_HUGEPAGE, and a little
less aggressive for files that are not mmapped or mapped without that
flag.
This patch (of 4):
The allocation flags of anonymous transparent huge pages can be controlled
through the files in /sys/kernel/mm/transparent_hugepage/defrag, which can
help the system from getting bogged down in the page reclaim and
compaction code when many THPs are getting allocated simultaneously.
However, the gfp_mask for shmem THP allocations were not limited by those
configuration settings, and some workloads ended up with all CPUs stuck on
the LRU lock in the page reclaim code, trying to allocate dozens of THPs
simultaneously.
This patch applies the same configurated limitation of THPs to shmem
hugepage allocations, to prevent that from happening.
Controlling the gfp_mask of THP allocations through the knobs in sysfs
allows users to determine the balance between how aggressively the system
tries to allocate THPs at fault time, and how much the application may end
up stalling attempting those allocations.
This way a THP defrag setting of "never" or "defer+madvise" will result in
quick allocation failures without direct reclaim when no 2MB free pages
are available.
With this patch applied, THP allocations for tmpfs will be a little more
aggressive than today for files mmapped with MADV_HUGEPAGE, and a little
less aggressive for files that are not mmapped or mapped without that
flag.
Link: https://lkml.kernel.org/r/20201124194925.623931-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20201124194925.623931-2-riel@surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pagevec_lookup_entries() is now just a wrapper around find_get_entries()
so remove it and convert all its callers.
Link: https://lkml.kernel.org/r/20201112212641.27837-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers of find_get_entries() use a pvec, so pass it directly instead
of manipulating it in the caller.
Link: https://lkml.kernel.org/r/20201112212641.27837-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers want to fetch the full size of the pvec.
Link: https://lkml.kernel.org/r/20201112212641.27837-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplifies the callers and uses the existing functionality in
find_get_entries(). We can also drop the final argument of
truncate_exceptional_pvec_entries() and simplify the logic in that
function.
Link: https://lkml.kernel.org/r/20201112212641.27837-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This simplifies the callers and leads to a more efficient implementation
since the XArray has this functionality already.
Link: https://lkml.kernel.org/r/20201112212641.27837-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have three functions (shmem_undo_range(), truncate_inode_pages_range()
and invalidate_mapping_pages()) which want exactly this function, so add
it to filemap.c. Before this patch, shmem_undo_range() would split any
compound page which overlaps either end of the range being punched in both
the first and second loops through the address space. After this patch,
that functionality is left for the second loop, which is arguably more
appropriate since the first loop is supposed to run through all the pages
quickly, and splitting a page can sleep.
[willy@infradead.org: add assertion]
Link: https://lkml.kernel.org/r/20201124041507.28996-3-willy@infradead.org
Link: https://lkml.kernel.org/r/20201112212641.27837-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enhance mapping_seek_hole_data() to handle partially uptodate pages and
convert the iomap seek code to call it.
Link: https://lkml.kernel.org/r/20201112212641.27837-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rewrite shmem_seek_hole_data() and move it to filemap.c.
[willy@infradead.org: don't put an xa_is_value() page]
Link: https://lkml.kernel.org/r/20201124041507.28996-4-willy@infradead.org
Link: https://lkml.kernel.org/r/20201112212641.27837-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a lot of common code in find_get_entries(),
find_get_pages_range() and find_get_pages_range_tag(). Factor out
find_get_entry() which simplifies all three functions.
[willy@infradead.org: remove VM_BUG_ON_PAGE()]
Link: https://lkml.kernel.org/r/20201124041507.28996-2-willy@infradead.orgLink: https://lkml.kernel.org/r/20201112212641.27837-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_get_entry doesn't "find" anything. It returns the entry at a
particular index.
Link: https://lkml.kernel.org/r/20201112212641.27837-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functionality of find_lock_entry() and find_get_entry() can be
provided by pagecache_get_page(), which lets us delete find_lock_entry()
and make find_get_entry() static.
Link: https://lkml.kernel.org/r/20201112212641.27837-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's no need to get a reference to the page, just load the entry and
see if it's a shadow entry.
Link: https://lkml.kernel.org/r/20201112212641.27837-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The comment shows that the reason for using find_get_entries() is now
stale; find_get_pages() will not return 0 if it hits a consecutive run of
swap entries, and I don't believe it has since 2011. pagevec_lookup() is
a simpler function to use than find_get_pages(), so use it instead.
Link: https://lkml.kernel.org/r/20201112212641.27837-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Overhaul multi-page lookups for THP", v4.
This THP prep patchset changes several page cache iteration APIs to only
return head pages.
- It's only possible to tag head pages in the page cache, so only
return head pages, not all their subpages.
- Factor a lot of common code out of the various batch lookup routines
- Add mapping_seek_hole_data()
- Unify find_get_entries() and pagevec_lookup_entries()
- Make find_get_entries only return head pages, like find_get_entry().
These are only loosely connected, but they seem to make sense together as
a series.
This patch (of 14):
Pagecache tags are used for dirty page writeback. Since dirtiness is
tracked on a per-THP basis, we only want to return the head page rather
than each subpage of a tagged page. All the filesystems which use huge
pages today are in-memory, so there are no tagged huge pages today.
Link: https://lkml.kernel.org/r/20201112212641.27837-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While reviewing a bug in hugetlb_reserve_pages, it was noticed that all
callers ignore the return value. Any failure is considered an ENOMEM
error by the callers.
Change the function to be of type bool. The function will return true if
the reservation was successful, false otherwise. Callers currently assume
a zero return code indicates success. Change the callers to look for true
to indicate success. No functional change, only code cleanup.
Link: https://lkml.kernel.org/r/20201221192542.15732-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If p is a kthread, it will be checked in oom_unkillable_task() so
we can delete the corresponding comment.
Link: https://lkml.kernel.org/r/20210125133006.7242-1-tangyizhou@huawei.com
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The helper range_in_vma() is introduced via commit 017b1660df ("mm:
migration: fix migration of huge PMD shared pages"). But we forgot to
use it in queue_pages_test_walk().
Link: https://lkml.kernel.org/r/20210130091352.20220-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now, NUMA balancing can only optimize the page placement among the NUMA
nodes if the default memory policy is used. Because the memory policy
specified explicitly should take precedence. But this seems too strict in
some situations. For example, on a system with 4 NUMA nodes, if the
memory of an application is bound to the node 0 and 1, NUMA balancing can
potentially migrate the pages between the node 0 and 1 to reduce
cross-node accessing without breaking the explicit memory binding policy.
So in this patch, we add MPOL_F_NUMA_BALANCING mode flag to
set_mempolicy() when mode is MPOL_BIND. With the flag specified, NUMA
balancing will be enabled within the thread to optimize the page placement
within the constrains of the specified memory binding policy. With the
newly added flag, the NUMA balancing control mechanism becomes,
- sysctl knob numa_balancing can enable/disable the NUMA balancing
globally.
- even if sysctl numa_balancing is enabled, the NUMA balancing will be
disabled for the memory areas or applications with the explicit
memory policy by default.
- MPOL_F_NUMA_BALANCING can be used to enable the NUMA balancing for
the applications when specifying the explicit memory policy
(MPOL_BIND).
Various page placement optimization based on the NUMA balancing can be
done with these flags. As the first step, in this patch, if the memory of
the application is bound to multiple nodes (MPOL_BIND), and in the hint
page fault handler the accessing node are in the policy nodemask, the page
will be tried to be migrated to the accessing node to reduce the
cross-node accessing.
If the newly added MPOL_F_NUMA_BALANCING flag is specified by an
application on an old kernel version without its support, set_mempolicy()
will return -1 and errno will be set to EINVAL. The application can use
this behavior to run on both old and new kernel versions.
And if the MPOL_F_NUMA_BALANCING flag is specified for the mode other than
MPOL_BIND, set_mempolicy() will return -1 and errno will be set to EINVAL
as before. Because we don't support optimization based on the NUMA
balancing for these modes.
In the previous version of the patch, we tried to reuse MPOL_MF_LAZY for
mbind(). But that flag is tied to MPOL_MF_MOVE.*, so it seems not a good
API/ABI for the purpose of the patch.
And because it's not clear whether it's necessary to enable NUMA balancing
for a specific memory area inside an application, so we only add the flag
at the thread level (set_mempolicy()) instead of the memory area level
(mbind()). We can do that when it become necessary.
To test the patch, we run a test case as follows on a 4-node machine with
192 GB memory (48 GB per node).
1. Change pmbench memory accessing benchmark to call set_mempolicy()
to bind its memory to node 1 and 3 and enable NUMA balancing. Some
related code snippets are as follows,
#include <numaif.h>
#include <numa.h>
struct bitmask *bmp;
int ret;
bmp = numa_parse_nodestring("1,3");
ret = set_mempolicy(MPOL_BIND | MPOL_F_NUMA_BALANCING,
bmp->maskp, bmp->size + 1);
/* If MPOL_F_NUMA_BALANCING isn't supported, fall back to MPOL_BIND */
if (ret < 0 && errno == EINVAL)
ret = set_mempolicy(MPOL_BIND, bmp->maskp, bmp->size + 1);
if (ret < 0) {
perror("Failed to call set_mempolicy");
exit(-1);
}
2. Run a memory eater on node 3 to use 40 GB memory before running pmbench.
3. Run pmbench with 64 processes, the working-set size of each process
is 640 MB, so the total working-set size is 64 * 640 MB = 40 GB. The
CPU and the memory (as in step 1.) of all pmbench processes is bound
to node 1 and 3. So, after CPU usage is balanced, some pmbench
processes run on the CPUs of the node 3 will access the memory of
the node 1.
4. After the pmbench processes run for 100 seconds, kill the memory
eater. Now it's possible for some pmbench processes to migrate
their pages from node 1 to node 3 to reduce cross-node accessing.
Test results show that, with the patch, the pages can be migrated from
node 1 to node 3 after killing the memory eater, and the pmbench score
can increase about 17.5%.
Link: https://lkml.kernel.org/r/20210120061235.148637-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compaction always operates on pages from a single given zone when
isolating both pages to migrate and freepages. Pageblock boundaries are
intersected with zone boundaries to be safe in case zone starts or ends in
the middle of pageblock. The use of pageblock_pfn_to_page() protects
against non-contiguous pageblocks.
The functions fast_isolate_freepages() and fast_isolate_around() don't
currently protect the fast freepage isolation thoroughly enough against
these corner cases, and can result in freepage isolation operate outside
of zone boundaries:
- in fast_isolate_freepages() if we get a pfn from the first pageblock
of a zone that starts in the middle of that pageblock, 'highest' can
be a pfn outside of the zone.
If we fail to isolate anything in this function, we may then call
fast_isolate_around() on a pfn outside of the zone and there
effectively do a set_pageblock_skip(page_to_pfn(highest)) which may
currently hit a VM_BUG_ON() in some configurations
- fast_isolate_around() checks only the zone end boundary and not
beginning, nor that the pageblock is contiguous (with
pageblock_pfn_to_page()) so it's possible that we end up calling
isolate_freepages_block() on a range of pfn's from two different
zones and end up e.g. isolating freepages under the wrong zone's
lock.
This patch should fix the above issues.
Link: https://lkml.kernel.org/r/20210217173300.6394-1-vbabka@suse.cz
Fixes: 5a811889de ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the fast_find_migrateblock(), it iterates ocer the freelist to find the
proper pageblock. But there are some misbehaviors.
First, if the page we found is equal to cc->migrate_pfn, it is considered
that we didn't find a suitable pageblock. Secondly, if the loop was
terminated because order is less than PAGE_ALLOC_COSTLY_ORDER, it could be
considered that we found a suitable one. Thirdly, if the skip bit is set
on the page block and we goto continue, it doesn't check nr_scanned.
Fourthly, if the page block's skip bit is set, it checks that page block
is the last of list, which is unnecessary.
Link: https://lkml.kernel.org/r/20210128130411.6125-1-vvghjk1234@gmail.com
Fixes: 70b44595ea ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
should_proactive_compact_node() returns true when sum of the weighted
fragmentation score of all the zones in the node is greater than the
wmark_high of compaction, which then triggers the proactive compaction
that operates on the individual zones of the node. But proactive
compaction runs on the zone only when its weighted fragmentation score
is greater than wmark_low(=wmark_high - 10).
This means that the sum of the weighted fragmentation scores of all the
zones can exceed the wmark_high but individual weighted fragmentation zone
scores can still be less than wmark_low which makes the unnecessary
trigger of the proactive compaction only to return doing nothing.
Issue with the return of proactive compaction with out even trying is its
deferral. It is simply deferred for 1 << COMPACT_MAX_DEFER_SHIFT if the
scores across the proactive compaction is same, thinking that compaction
didn't make any progress but in reality it didn't even try. With the
delay between successive retries for proactive compaction is 500msec, it
can result into the deferral for ~30sec with out even trying the proactive
compaction.
Test scenario is that: compaction_proactiveness=50 thus the wmark_low = 50
and wmark_high = 60. System have 2 zones(Normal and Movable) with sizes
5GB and 6GB respectively. After opening some apps on the android, the
weighted fragmentation scores of these zones are 47 and 49 respectively.
Since the sum of these fragmentation scores are above the wmark_high which
triggers the proactive compaction and there since the individual zones
weighted fragmentation scores are below wmark_low, it returns without
trying the proactive compaction. As a result the weighted fragmentation
scores of the zones are still 47 and 49 which makes the existing logic to
defer the compaction thinking that noprogress is made across the
compaction.
Fix this by checking just zone fragmentation score, not the weighted, in
__compact_finished() and use the zones weighted fragmentation score in
fragmentation_score_node(). In the test case above, If the weighted
average of is above wmark_high, then individual score (not adjusted) of
atleast one zone has to be above wmark_high. Thus it avoids the
unnecessary trigger and deferrals of the proactive compaction.
Link: https://lkml.kernel.org/r/1610989938-31374-1-git-send-email-charante@codeaurora.org
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nitin Gupta <ngupta@nitingupta.dev>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The VM_BUG_ON_PAGE(!PageLocked(page), page) is also done in PageMovable.
Remove this explicitly one.
Link: https://lkml.kernel.org/r/20210109081420.46030-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
isolate_migratepages_block() used rcu_read_lock() with the intention of
safeguarding against the mem_cgroup being destroyed concurrently; but
its TestClearPageLRU already protects against that. Delete the
unnecessary rcu_read_lock() and _unlock().
Hugh Dickins helped on commit log polishing, Thanks!
Link: https://lkml.kernel.org/r/1608614453-10739-3-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can simplify the zhdr initialization by memset() the zhdr first
instead of set struct member to zero one by one. This would also make
code more compact and clear.
Link: https://lkml.kernel.org/r/20210120085851.16159-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit dcf5aedb24 ("z3fold: stricter locking and more careful
reclaim"), release_z3fold_page() is used again. So we can drop the
unused attribute safely.
Link: https://lkml.kernel.org/r/20210120084008.58432-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation. I noticed that the bits in the documentation didn't
match the bits in the #defines.
The VM never explicitly checks the RECLAIM_ZONE bit. The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'. The
RECLAIM_ZONE #define was removed in a cleanup. That, by itself is fine.
But, when the bit was removed (bit 0) the _other_ bit locations also got
changed. That's not OK because the bit values are documented to mean
one specific thing. Users surely do not expect the meaning to change
from kernel to kernel.
The end result is that if someone had a script that did:
sysctl vm.zone_reclaim_mode=1
it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.
Put the bits back the way they were and add a comment so something like
this is a bit harder to do again. Update the documentation to make it
clear that the first bit is ignored.
Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 648b5cf368 ("mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE")
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerald Schaefer reported a panic on s390 in hugepage_subpool_put_pages()
with linux-next 5.12.0-20210222.
Call trace:
hugepage_subpool_put_pages.part.0+0x2c/0x138
__free_huge_page+0xce/0x310
alloc_pool_huge_page+0x102/0x120
set_max_huge_pages+0x13e/0x350
hugetlb_sysctl_handler_common+0xd8/0x110
hugetlb_sysctl_handler+0x48/0x58
proc_sys_call_handler+0x138/0x238
new_sync_write+0x10e/0x198
vfs_write.part.0+0x12c/0x238
ksys_write+0x68/0xf8
do_syscall+0x82/0xd0
__do_syscall+0xb4/0xc8
system_call+0x72/0x98
This is a result of the change which moved the hugetlb page subpool
pointer from page->private to page[1]->private. When new pages are
allocated from the buddy allocator, the private field of the head
page will be cleared, but the private field of subpages is not modified.
Therefore, old values may remain.
Fix by initializing hugetlb page subpool pointer in prep_new_huge_page().
Link: https://lkml.kernel.org/r/20210223215544.313871-1-mike.kravetz@oracle.com
Fixes: f1280272ae4d ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use new hugetlb specific HPageFreed flag to replace the PageHugeFreed
interfaces.
Link: https://lkml.kernel.org/r/20210122195231.324857-6-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use new hugetlb specific HPageTemporary flag to replace the
PageHugeTemporary() interfaces. PageHugeTemporary does contain a
PageHuge() check. However, this interface is only used within hugetlb
code where we know we are dealing with a hugetlb page. Therefore, the
check can be eliminated.
Link: https://lkml.kernel.org/r/20210122195231.324857-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the new hugetlb page specific flag HPageMigratable to replace the
page_huge_active interfaces. By it's name, page_huge_active implied that
a huge page was on the active list. However, that is not really what code
checking the flag wanted to know. It really wanted to determine if the
huge page could be migrated. This happens when the page is actually added
to the page cache and/or task page table. This is the reasoning behind
the name change.
The VM_BUG_ON_PAGE() calls in the *_huge_active() interfaces are not
really necessary as we KNOW the page is a hugetlb page. Therefore, they
are removed.
The routine page_huge_active checked for PageHeadHuge before testing the
active bit. This is unnecessary in the case where we hold a reference or
lock and know it is a hugetlb head page. page_huge_active is also called
without holding a reference or lock (scan_movable_pages), and can race
with code freeing the page. The extra check in page_huge_active shortened
the race window, but did not prevent the race. Offline code calling
scan_movable_pages already deals with these races, so removing the check
is acceptable. Add comment to racy code.
[songmuchun@bytedance.com: remove set_page_huge_active() declaration from include/linux/hugetlb.h]
Link: https://lkml.kernel.org/r/CAMZfGtUda+KoAZscU0718TN61cSFwp4zy=y2oZ=+6Z2TAZZwng@mail.gmail.com
Link: https://lkml.kernel.org/r/20210122195231.324857-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "create hugetlb flags to consolidate state", v3.
While discussing a series of hugetlb fixes in [1], it became evident that
the hugetlb specific page state information is stored in a somewhat
haphazard manner. Code dealing with state information would be easier to
read, understand and maintain if this information was stored in a
consistent manner.
This series uses page.private of the hugetlb head page for storing a set
of hugetlb specific page flags. Routines are priovided for test, set and
clear of the flags.
[1] https://lore.kernel.org/r/20210106084739.63318-1-songmuchun@bytedance.com
This patch (of 4):
As hugetlbfs evolved, state information about hugetlb pages was added.
One 'convenient' way of doing this was to use available fields in tail
pages. Over time, it has become difficult to know the meaning or contents
of fields simply by looking at a small bit of code. Sometimes, the naming
is just confusing. For example: The PagePrivate flag indicates a huge
page reservation was consumed and needs to be restored if an error is
encountered and the page is freed before it is instantiated. The
page.private field contains the pointer to a subpool if the page is
associated with one.
In an effort to make the code more readable, use page.private to contain
hugetlb specific page flags. These flags will have test, set and clear
functions similar to those used for 'normal' page flags. More
importantly, an enum of flag values will be created with names that
actually reflect their purpose.
In this patch,
- Create infrastructure for hugetlb specific page flag functions
- Move subpool pointer to page[1].private to make way for flags
Create routines with meaningful names to modify subpool field
- Use new HPageRestoreReserve flag instead of PagePrivate
Conversion of other state information will happen in subsequent patches.
Link: https://lkml.kernel.org/r/20210122195231.324857-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210122195231.324857-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The premise of the refault distance is that it can be seen as a deficit of
the inactive list space, so that if the inactive list would have had (R -
E) more slots, the page would not have been evicted but promoted to the
active list instead.
However, the way the code is ordered right now set us to be off by one, so
the real number of slots would be (R - E) + 1. I stumbled upon this when
trying to understand the code and it puzzled me that the comments did not
match what the code did.
This it not an issue at all since evictions and refaults tend to happen in
a number large enough that being off-by-one does not have any impact - and
since the compiler and CPUs are free to rearrange the execution sequence
anyway.
But as Johannes says, it is better to re-arrange the code in the proper
order since otherwise would be misleading to somebody who is actively
reading and trying to understand the logic of the code - like it happened
to me.
Link: https://lkml.kernel.org/r/20210201060651.3781-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All other references to the function were removed after
commit b910718a94 ("mm: vmscan: detect file thrashing at the reclaim
root").
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-11-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-11-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move scattered VM_BUG_ONs to two essential places that cover all
lru list additions and deletions.
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-8-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to page_off_lru(), the new function does non-atomic clearing
of PageLRU() in addition to PageActive() and PageUnevictable(), on a
page that has no references left.
If PageActive() and PageUnevictable() are both set, refuse to clear
either and leave them to bad_page(). This is a behavior change that
is meant to help debug.
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-7-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The parameter is redundant in the sense that it can be potentially
extracted from the "struct page" parameter by page_lru(). We need to
make sure that existing PageActive() or PageUnevictable() remains
until the function returns. A few places don't conform, and simple
reordering fixes them.
This patch may have left page_off_lru() seemingly odd, and we'll take
care of it in the next patch.
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-6-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The parameter is redundant in the sense that it can be extracted
from the "struct page" parameter by page_lru() correctly.
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-5-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-5-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "enum lru_list" parameter to add_page_to_lru_list() and
add_page_to_lru_list_tail() is redundant in the sense that it can
be extracted from the "struct page" parameter by page_lru().
A caveat is that we need to make sure PageActive() or
PageUnevictable() is correctly set or cleared before calling
these two functions. And they are indeed.
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-4-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-4-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: lru related cleanups", v2.
The cleanups are intended to reduce the verbosity in lru list operations
and make them less error-prone. A typical example would be how the
patches change __activate_page():
static void __activate_page(struct page *page, struct lruvec *lruvec)
{
if (!PageActive(page) && !PageUnevictable(page)) {
- int lru = page_lru_base_type(page);
int nr_pages = thp_nr_pages(page);
- del_page_from_lru_list(page, lruvec, lru);
+ del_page_from_lru_list(page, lruvec);
SetPageActive(page);
- lru += LRU_ACTIVE;
- add_page_to_lru_list(page, lruvec, lru);
+ add_page_to_lru_list(page, lruvec);
trace_mm_lru_activate(page);
There are a few more places like __activate_page() and they are
unnecessarily repetitive in terms of figuring out which list a page should
be added onto or deleted from. And with the duplicated code removed, they
are easier to read, IMO.
Patch 1 to 5 basically cover the above. Patch 6 and 7 make code more
robust by improving bug reporting. Patch 8, 9 and 10 take care of some
dangling helpers left in header files.
This patch (of 10):
There is add_page_to_lru_list(), and move_pages_to_lru() should reuse it,
not duplicate it.
Link: https://lkml.kernel.org/r/20210122220600.906146-1-yuzhao@google.com
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-2-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If list_lru_shrink_count is 0, we always return SHRINK_EMPTY regardless of
the value of max_nodes. So we can return early if nodes == 0 to save some
cpu cycles of approximating a reasonable limit for the nodes.
Link: https://lkml.kernel.org/r/20210123073825.46709-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function just returns 2 results, so using a 'switch' to deal with its
result is unnecessary. Also simplify it to a bool func as Vlastimil
suggested.
Also remove 'goto' by reusing list_move(), and take Matthew Wilcox's
suggestion to update comments in function.
Link: https://lkml.kernel.org/r/728874d7-2d93-4049-68c1-dcc3b2d52ccd@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If hugetlb_cma is enabled, it will skip boot time allocation when
allocating gigantic page, that doesn't means allocation failure, so
suppress this warning info.
Link: https://lkml.kernel.org/r/20210219123909.13130-1-chenwandun@huawei.com
Fixes: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page structs are not guaranteed to be contiguous for gigantic pages. The
routine copy_huge_page_from_user can encounter gigantic pages, yet it
assumes page structs are contiguous when copying pages from user space.
Since page structs for the target gigantic page are not contiguous, the
data copied from user space could overwrite other pages not associated
with the gigantic page and cause data corruption.
Non-contiguous page structs are generally not an issue. However, they can
exist with a specific kernel configuration and hotplug operations. For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where
the gigantic page will be allocated.
Link: https://lkml.kernel.org/r/20210217184926.33567-2-mike.kravetz@oracle.com
Fixes: 8fb5debc5f ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page structs are not guaranteed to be contiguous for gigantic pages. The
routine update_and_free_page can encounter a gigantic page, yet it assumes
page structs are contiguous when setting page flags in subpages.
If update_and_free_page encounters non-contiguous page structs, we can see
“BUG: Bad page state in process …” errors.
Non-contiguous page structs are generally not an issue. However, they can
exist with a specific kernel configuration and hotplug operations. For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where
the gigantic page will be allocated. Zi Yan outlined steps to reproduce
here [1].
[1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/
Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com
Fixes: 944d9fec8d ("hugetlb: add support for gigantic page allocation at runtime")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use helper huge_page_size() to get the hugepage size directly to
simplify the code slightly.
[linmiaohe@huawei.com: use helper huge_page_size() to get hugepage size]
Link: https://lkml.kernel.org/r/20210209021803.49211-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210208082450.15716-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers know they are operating on a hugetlb head page. So this
VM_BUG_ON_PAGE can not catch anything useful.
Link: https://lkml.kernel.org/r/20210209071151.44731-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could use helper function range_in_vma() to check whether the vma is in
the desired range to simplify the code.
Link: https://lkml.kernel.org/r/20210204112949.43051-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could use helper function pages_per_huge_page() to get the number of
pages in a hstate to simplify the code slightly.
Link: https://lkml.kernel.org/r/20210205084513.29624-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Differentiate between hardware not supporting hugepages and user disabling
THP via 'echo never > /sys/kernel/mm/transparent_hugepage/enabled'
For the devdax namespace, the kernel handles the above via the
supported_alignment attribute and failing to initialize the namespace if
the namespace align value is not supported on the platform.
For the fsdax namespace, the kernel will continue to initialize the
namespace. This can result in the kernel creating a huge pte entry even
though the hardware don't support the same.
We do want hugepage support with pmem even if the end-user disabled THP
via sysfs file (/sys/kernel/mm/transparent_hugepage/enabled). Hence
differentiate between hardware/firmware lacking support vs user-controlled
disable of THP and prevent a huge fault if the hardware lacks hugepage
support.
Link: https://lkml.kernel.org/r/20210205023956.417587-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value of set_huge_zero_page() is always ignored. So we should
drop such return value.
Link: https://lkml.kernel.org/r/20210203084816.46307-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gigantic page is a compound page and its order is more than 1. Thus it
must be available for hpage_pincount. Let's remove the redundant check
for gigantic page.
Link: https://lkml.kernel.org/r/20210202112002.73170-1-yanfei.xu@windriver.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos sasitfy to satisfy, reservtion to reservation, hugegpage to
hugepage and uniprocesor to uniprocessor in comments.
Link: https://lkml.kernel.org/r/20210128112028.64831-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a given hugepage backing a VA, there's a rather ineficient loop which
is solely responsible for storing subpages in GUP @pages/@vmas array. For
each subpage we check whether it's within range or size of @pages and keep
increment @pfn_offset and a couple other variables per subpage iteration.
Simplify this logic and minimize the cost of each iteration to just store
the output page/vma. Instead of incrementing number of @refs iteratively,
we do it through pre-calculation of @refs and only with a tight loop for
storing pinned subpages/vmas.
Additionally, retain existing behaviour with using mem_map_offset() when
recording the subpages for configurations that don't have a contiguous
mem_map.
pinning consequently improves bringing us close to
{pin,get}_user_pages_fast:
- 16G with 1G huge page size
gup_test -f /mnt/huge/file -m 16384 -r 30 -L -S -n 512 -w
PIN_LONGTERM_BENCHMARK: ~12.8k us -> ~5.8k us
PIN_FAST_BENCHMARK: ~3.7k us
Link: https://lkml.kernel.org/r/20210128182632.24562-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/hugetlb: follow_hugetlb_page() improvements", v2.
While looking at ZONE_DEVICE struct page reuse particularly the last
patch[0], I found two possible improvements for follow_hugetlb_page()
which is solely used for get_user_pages()/pin_user_pages().
The first patch batches page refcount updates while the second tidies up
storing the subpages/vmas. Both together bring the cost of slow variant
of gup() cost from ~87.6k usecs to ~5.8k usecs.
libhugetlbfs tests seem to pass as well gup_test benchmarks with hugetlbfs
vmas.
This patch (of 2):
follow_hugetlb_page() once it locks the pmd/pud, checks all its N subpages
in a huge page and grabs a reference for each one. Similar to gup-fast,
have follow_hugetlb_page() grab the head page refcount only after counting
all its subpages that are part of the just faulted huge page.
Consequently we reduce the number of atomics necessary to pin said huge
page, which improves non-fast gup() considerably:
- 16G with 1G huge page size
gup_test -f /mnt/huge/file -m 16384 -r 10 -L -S -n 512 -w
PIN_LONGTERM_BENCHMARK: ~87.6k us -> ~12.8k us
Link: https://lkml.kernel.org/r/20210128182632.24562-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20210128182632.24562-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following coccicheck warnings:
mm/hugetlb.c:3372:20-22: WARNING !A || A && B is equivalent to !A || B.
Link: https://lkml.kernel.org/r/1611643468-52233-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a hugetlbfs filesystem is created with the min_size option and
without the size option, used_hpages is always 0 and might lead to
release subpool prematurely because it indicates no pages are used now
while there might be.
In order to fix this issue, we should check used_hpages == 0 iff
max_hpages accounting is enabled. As max_hpages accounting should be
enabled in most common case, this is not worth a Cc stable.
[mike.kravetz@oracle.com: new changelog]
Link: https://lkml.kernel.org/r/20210126115510.53374-1-linmiaohe@huawei.com
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit a551643895 ("hugetlb: modular state for hugetlb page
size"), we can use huge_page_order to access hstate->order and
pages_per_huge_page to fetch the pages per huge page. But
gather_bootmem_prealloc() forgot to use it.
Link: https://lkml.kernel.org/r/20210114114435.40075-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reservation accounting remains unchanged, hugetlb_acct_memory() will
do nothing except holding and releasing hugetlb_lock. We should avoid
this unnecessary hugetlb_lock lock/unlock cycle which is happening on
'most' hugetlb munmap operations by check delta against 0 at the beginning
of hugetlb_acct_memory.
Link: https://lkml.kernel.org/r/20210115092013.61012-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca663 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In hugetlb_sysfs_add_hstate(), we would do kobject_put() on hstate_kobjs
when failed to create sysfs group but forget to set hstate_kobjs to NULL.
Then in hugetlb_register_node() error path, we may free it again via
hugetlb_unregister_node().
Link: https://lkml.kernel.org/r/20210107123249.36964-1-linmiaohe@huawei.com
Fixes: a343787016 ("hugetlb: new sysfs interface")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When set_pmd_at is called in function do_huge_pmd_anonymous_page, new tlb
entry can be added by software on MIPS platform.
Here add update_mmu_cache_pmd when pmd entry is set, and
update_mmu_cache_pmd is defined as empty excepts arc/mips platform. This
patch has no negative effect on other platforms except arc/mips system.
Link: http://lkml.kernel.org/r/1592990792-1923-2-git-send-email-maobibo@loongson.cn
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Daniel Silsby <dansilsby@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a memory uncorrected error is triggered by process who accessed the
address with error, It's Action Required Case for only current process
which triggered this; This Action Required case means Action optional to
other process who share the same page. Usually killing current process
will be sufficient, other processes sharing the same page will get be
signaled when they really touch the poisoned page.
But there is another scenario that other processes sharing the same page
want to be signaled early with PF_MCE_EARLY set. In this case, we should
get them into kill list and signal BUS_MCEERR_AO to them.
So in this patch, task_early_kill will check current process if
force_early is set, and if not current,the code will fallback to
find_early_kill_thread() to check if there is PF_MCE_EARLY process who
cares the error.
In kill_proc(), BUS_MCEERR_AR is only send to current, other processes in
kill list will be signaled with BUS_MCEERR_AO.
Link: https://lkml.kernel.org/r/20210122132424.313c8f5f.yaoaili@kingsoft.com
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
adjust_managed_page_count() as called by free_reserved_page() properly
handles pages in a highmem zone, so we can reuse it for
free_highmem_page().
We can now get rid of totalhigh_pages_inc() and simplify
free_reserved_page().
Link: https://lkml.kernel.org/r/20210126182113.19892-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Local variable 'zone_start_pfn' is not needed since there's only one call
site in free_area_init_core(). Let's remove it and pass
zone->zone_start_pfn directly to init_currently_empty_zone().
Link: https://lkml.kernel.org/r/20210122135956.5946-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As David suggested, simply passing 'struct zone *zone' is enough. We can
get all needed information from 'struct zone*' easily.
Link: https://lkml.kernel.org/r/20210122135956.5946-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current memmap_init_zone() only handles memory region inside one zone,
actually memmap_init() does the memmap init of one zone. So rename both
of them accordingly.
Link: https://lkml.kernel.org/r/20210122135956.5946-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The currently existing kasan_check_read/write() annotations are intended
to be used for kernel modules that have KASAN compiler instrumentation
disabled. Thus, they are only relevant for the software KASAN modes that
rely on compiler instrumentation.
However there's another use case for these annotations: ksize() checks
that the object passed to it is indeed accessible before unpoisoning the
whole object. This is currently done via __kasan_check_read(), which is
compiled away for the hardware tag-based mode that doesn't rely on
compiler instrumentation. This leads to KASAN missing detecting some
memory corruptions.
Provide another annotation called kasan_check_byte() that is available
for all KASAN modes. As the implementation rename and reuse
kasan_check_invalid_free(). Use this new annotation in ksize().
To avoid having ksize() as the top frame in the reported stack trace
pass _RET_IP_ to __kasan_check_byte().
Also add a new ksize_uaf() test that checks that a use-after-free is
detected via ksize() itself, and via plain accesses that happen later.
Link: https://linux-review.googlesource.com/id/Iaabf771881d0f9ce1b969f2a62938e99d3308ec5
Link: https://lkml.kernel.org/r/f32ad74a60b28d8402482a38476f02bb7600f620.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Generic mm functions that call KASAN annotations that might report a bug
pass _RET_IP_ to them as an argument. This allows KASAN to include the
name of the function that called the mm function in its report's header.
Now that KASAN has inline wrappers for all of its annotations, move
_RET_IP_ to those wrappers to simplify annotation call sites.
Link: https://linux-review.googlesource.com/id/I8fb3c06d49671305ee184175a39591bc26647a67
Link: https://lkml.kernel.org/r/5c1490eddf20b436b8c4eeea83fce47687d5e4a4.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It might not be obvious to the compiler that the expression must be
executed between writing and reading to fail_data. In this case, the
compiler might reorder or optimize away some of the accesses, and
the tests will fail.
Add compiler barriers around the expression in KUNIT_EXPECT_KASAN_FAIL
and use READ/WRITE_ONCE() for accessing fail_data fields.
Link: https://linux-review.googlesource.com/id/I046079f48641a1d36fe627fc8827a9249102fd50
Link: https://lkml.kernel.org/r/6f11596f367d8ae8f71d800351e9a5d91eda19f6.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On a high level, this patch allows running KUnit KASAN tests with the
hardware tag-based KASAN mode.
Internally, this change reenables tag checking at the end of each KASAN
test that triggers a tag fault and leads to tag checking being disabled.
Also simplify is_write calculation in report_tag_fault.
With this patch KASAN tests are still failing for the hardware tag-based
mode; fixes come in the next few patches.
[andreyknvl@google.com: export HW_TAGS symbols for KUnit tests]
Link: https://lkml.kernel.org/r/e7eeb252da408b08f0c81b950a55fb852f92000b.1613155970.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Id94dc9eccd33b23cda4950be408c27f879e474c8
Link: https://lkml.kernel.org/r/51b23112cf3fd62b8f8e9df81026fa2b15870501.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add 3 new tests for tag-based KASAN modes:
1. Check that match-all pointer tag is not assigned randomly.
2. Check that 0xff works as a match-all pointer tag.
3. Check that there are no match-all memory tags.
Note, that test #3 causes a significant number (255) of KASAN reports
to be printed during execution for the SW_TAGS mode.
[arnd@arndb.de: export kasan_poison]
Link: https://lkml.kernel.org/r/20210125112831.2156212-1-arnd@kernel.org
[akpm@linux-foundation.org: s/EXPORT_SYMBOL_GPL/EXPORT_SYMBOL/, per Andrey]
Link: https://linux-review.googlesource.com/id/I78f1375efafa162b37f3abcb2c5bc2f3955dfd8e
Link: https://lkml.kernel.org/r/da841a5408e2204bf25f3b23f70540a65844e8a4.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: HW_TAGS tests support and fixes", v4.
This patchset adds support for running KASAN-KUnit tests with the
hardware tag-based mode and also contains a few fixes.
This patch (of 15):
There's a number of internal KASAN functions that are used across multiple
source code files and therefore aren't marked as static inline. To avoid
littering the kernel function names list with generic function names,
prefix all such KASAN functions with kasan_.
As a part of this change:
- Rename internal (un)poison_range() to kasan_(un)poison() (no _range)
to avoid name collision with a public kasan_unpoison_range().
- Rename check_memory_region() to kasan_check_range(), as it's a more
fitting name.
Link: https://lkml.kernel.org/r/cover.1610733117.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I719cc93483d4ba288a634dba80ee6b7f2809cd26
Link: https://lkml.kernel.org/r/13777aedf8d3ebbf35891136e1f2287e2f34aaba.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace '&next->lru != list' with list_entry_is_head(). No functional
change.
Link: https://lkml.kernel.org/r/20201222182735.GA1257912@ubuntu-A520I-AC
Signed-off-by: sh <sh_def@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mremap with MREMAP_DONTUNMAP can move all page table entries to new vma,
which means all pages allocated for the old vma are not relevant to it
anymore, and the relevant anon_vma links needs to be unlinked, in nature
the old vma is much like been freshly created and have no pages been fault
in.
But we should not do unlink, if the new vma has effectively merged with
the old one.
[lixinhai.lxh@gmail.com: v2]
Link: https://lkml.kernel.org/r/20210127083917.309264-2-lixinhai.lxh@gmail.com
Link: https://lkml.kernel.org/r/20210119075126.3513154-2-lixinhai.lxh@gmail.com
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case the vma will continue to be used after unlink its relevant
anon_vma, we need to reset the vma->anon_vma pointer to NULL. So, later
when fault happen within this vma again, a new anon_vma will be prepared.
By this way, the vma will only be checked for reverse mapping of pages
which been fault in after the unlink_anon_vmas call.
Currently, the mremap with MREMAP_DONTUNMAP scenario will continue use the
vma after moved its page table entries to a new vma. For other scenarios,
the vma itself will be freed after call unlink_anon_vmas.
Link: https://lkml.kernel.org/r/20210119075126.3513154-1-lixinhai.lxh@gmail.com
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Obviously, the error variable detection of the if statement is
for the mprotect callback function, so it is also put into the
scope of calling callbck.
This is a cleanup which makes this site consistent with the rest of this
function's error handling.
Link: https://lkml.kernel.org/r/20210118133310.98375-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reported-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If all pte entry is none in 'non-create' case, we would break the loop with
pte unchanged. Then the wrong pte - 1 would be passed to pte_unmap_unlock.
This is a theoretical issue which may not be a real bug. So it's not worth
cc stable.
Link: https://lkml.kernel.org/r/20210205081925.59809-1-linmiaohe@huawei.com
Fixes: aee16b3cee ("Add apply_to_page_range() which applies a function to a pte range")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ian Pratt <ian.pratt@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The developer will have trouble figuring out why the BUG actually
triggered when there is a complex expression in the VM_BUG_ON. Because we
can only identify the condition triggered BUG via line number provided by
VM_BUG_ON. Optimize this by spliting such a complex expression into two
simple conditions.
Link: https://lkml.kernel.org/r/20210203084137.25522-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The condition (A && !C && !D) || !A is equivalent to !A || (A && !C && !D)
and can be further simplified to !A || (!C && !D).
Link: https://lkml.kernel.org/r/20210201114319.34720-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 42e4089c78 ("x86/speculation/l1tf: Disallow non privileged
high MMIO PROT_NONE mappings"), when the first pfn modify is not allowed,
we would break the loop with pte unchanged. Then the wrong pte - 1 would
be passed to pte_unmap_unlock.
Andi said:
"While the fix is correct, I'm not sure if it actually is a real bug.
Is there any architecture that would do something else than unlocking
the underlying page? If it's just the underlying page then it should
be always the same page, so no bug"
Link: https://lkml.kernel.org/r/20210109080118.20885-1-linmiaohe@huawei.com
Fixes: 42e4089c78 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings")
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The local variable 'retval' is assigned just for once in __do_sys_brk(),
and the function returns the value of the local variable right after the
assignment. Remove unnecessary assignment and local variable declaration.
Link: https://lkml.kernel.org/r/20201222103249.30683-1-adrianhuang0701@gmail.com
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLUB currently account kmalloc() and kmalloc_node() allocations larger
than order-1 page per-node. But it forget to update the per-memcg
vmstats. So it can lead to inaccurate statistics of "slab_unreclaimable"
which is from memory.stat. Fix it by using mod_lruvec_page_state instead
of mod_node_page_state.
Link: https://lkml.kernel.org/r/20210223092423.42420-1-songmuchun@bytedance.com
Fixes: 6a486c0ad4 ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use a global percpu int_active_memcg variable to store the remote memcg
when we are in the interrupt context. But get_active_memcg always return
the current->active_memcg or root_mem_cgroup. The remote memcg (set in
the interrupt context) is ignored. This is not what we want. So fix it.
Link: https://lkml.kernel.org/r/20210223091101.42150-1-songmuchun@bytedance.com
Fixes: 37d5985c00 ("mm: kmem: prepare remote memcg charging infra for interrupt contexts")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When pages are swapped in, the VM may retain the swap copy to avoid
repeated writes in the future. It's also retained if shared pages are
faulted back in some processes, but not in others. During that time we
have an in-memory copy of the page, as well as an on-swap copy. Cgroup1
and cgroup2 handle these overlapping lifetimes slightly differently due to
the nature of how they account memory and swap:
Cgroup1 has a unified memory+swap counter that tracks a data page
regardless whether it's in-core or swapped out. On swapin, we transfer
the charge from the swap entry to the newly allocated swapcache page, even
though the swap entry might stick around for a while. That's why we have
a mem_cgroup_uncharge_swap() call inside mem_cgroup_charge().
Cgroup2 tracks memory and swap as separate, independent resources and thus
has split memory and swap counters. On swapin, we charge the newly
allocated swapcache page as memory, while the swap slot in turn must
remain charged to the swap counter as long as its allocated too.
The cgroup2 logic was broken by commit 2d1c498072 ("mm: memcontrol: make
swap tracking an integral part of memory control"), because it
accidentally removed the do_memsw_account() check in the branch inside
mem_cgroup_uncharge() that was supposed to tell the difference between the
charge transfer in cgroup1 and the separate counters in cgroup2.
As a result, cgroup2 currently undercounts retained swap to varying
degrees: swap slots are cached up to 50% of the configured limit or total
available swap space; partially faulted back shared pages are only limited
by physical capacity. This in turn allows cgroups to significantly
overconsume their alloted swap space.
Add the do_memsw_account() check back to fix this problem.
Link: https://lkml.kernel.org/r/20210217153237.92484-1-songmuchun@bytedance.com
Fixes: 2d1c498072 ("mm: memcontrol: make swap tracking an integral part of memory control")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alloc_page_buffers() currently uses get_mem_cgroup_from_page() for
charging the buffers to the page owner, which does an rcu-protected
page->memcg lookup and acquires a reference. But buffer allocation has
the page lock held throughout, which pins the page to the memcg and
thereby the memcg - neither rcu nor holding an extra reference during the
allocation are necessary. Use a raw page_memcg() instead.
This was the last user of get_mem_cgroup_from_page(), delete it.
Link: https://lkml.kernel.org/r/20210209190126.97842-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The list_lru file used to have local kvfree_rcu() which was renamed by
commit e0feed08ab ("mm/list_lru.c: Rename kvfree_rcu() to local
variant") to introduce the globally visible kvfree_rcu().
Now we have global kvfree_rcu(), so remove the local kvfree_rcu_local()
and just use the global one.
Link: https://lkml.kernel.org/r/20210207152148.1285842-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The rule of list walk has gone since commit a9d5adeeb4
("mm/memcontrol: allow to uncharge page without using page->lru field")
So remove the strange comment and replace the loop with a
list_for_each_entry().
There is only one caller of the uncharge_list(). So just fold it into
mem_cgroup_uncharge_list() and remove it.
Link: https://lkml.kernel.org/r/20210204163055.56080-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix below warnings reported by coccicheck:
mm/memcontrol.c:451:3-9: WARNING: NULL check before some freeing functions is not needed.
Link: https://lkml.kernel.org/r/1611216029-34397-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I've noticed that __memcg_kmem_charge() and __memcg_kmem_uncharge() are
not used anywhere except memcontrol.c. Yet they are not declared as
non-static and are declared in memcontrol.h.
This patch makes them static.
Link: https://lkml.kernel.org/r/20210108020332.4096911-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds swapcache stat for the cgroup v2. The swapcache
represents the memory that is accounted against both the memory and the
swap limit of the cgroup. The main motivation behind exposing the
swapcache stat is for enabling users to gracefully migrate from cgroup
v1's memsw counter to cgroup v2's memory and swap counters.
Cgroup v1's memsw limit allows users to limit the memory+swap usage of a
workload but without control on the exact proportion of memory and swap.
Cgroup v2 provides separate limits for memory and swap which enables more
control on the exact usage of memory and swap individually for the
workload.
With some little subtleties, the v1's memsw limit can be switched with the
sum of the v2's memory and swap limits. However the alternative for memsw
usage is not yet available in cgroup v2. Exposing per-cgroup swapcache
stat enables that alternative. Adding the memory usage and swap usage and
subtracting the swapcache will approximate the memsw usage. This will
help in the transparent migration of the workloads depending on memsw
usage and limit to v2' memory and swap counters.
The reasons these applications are still interested in this approximate
memsw usage are: (1) these applications are not really interested in two
separate memory and swap usage metrics. A single usage metric is more
simple to use and reason about for them.
(2) The memsw usage metric hides the underlying system's swap setup from
the applications. Applications with multiple instances running in a
datacenter with heterogeneous systems (some have swap and some don't) will
keep seeing a consistent view of their usage.
[akpm@linux-foundation.org: fix CONFIG_SWAP=n build]
Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lock_page_lruvec() and its variants used rcu_read_lock() with the
intention of safeguarding against the mem_cgroup being destroyed
concurrently; but so long as they are called under the specified
conditions (as they are), there is no way for the page's mem_cgroup to be
destroyed. Delete the unnecessary rcu_read_lock() and _unlock().
Hugh Dickins polished the commit log. Thanks a lot!
Link: https://lkml.kernel.org/r/1608614453-10739-2-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lock_page_lruvec() and its variants are safe to use under the same
conditions as commit_charge(): add lock_page_memcg() to the comment.
Polished with Hugh Dickins' suggestions, thanks!
Link: https://lkml.kernel.org/r/1608614453-10739-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although the ratio of the slab is one, we also should read the ratio from
the related memory_stats instead of hard-coding. And the local variable
of size is already the value of slab_unreclaimable. So we do not need to
read again.
To do this we need some code like below:
if (unlikely(memory_stats[i].idx == NR_SLAB_UNRECLAIMABLE_B)) {
- size = memcg_page_state(memcg, NR_SLAB_RECLAIMABLE_B) +
- memcg_page_state(memcg, NR_SLAB_UNRECLAIMABLE_B);
+ VM_BUG_ON(i < 1);
+ VM_BUG_ON(memory_stats[i - 1].idx != NR_SLAB_RECLAIMABLE_B);
+ size += memcg_page_state(memcg, memory_stats[i - 1].idx) *
+ memory_stats[i - 1].ratio;
It requires a series of VM_BUG_ONs or comments to ensure these two items
are actually adjacent and in the right order. So it would probably be
easier to implement this using a wrapper that has a big switch() for unit
conversion.
More details about this discussion can refer to:
https://lore.kernel.org/patchwork/patch/1348611/
This would fix the ratio inconsistency and get rid of the order
guarantee.
Link: https://lkml.kernel.org/r/20201228164110.2838-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin