Commit Graph

238 Commits

Author SHA1 Message Date
Andreas Kemnade 92bf78b33b gpio: omap: use dynamic allocation of base
Static allocatin is deprecated and may cause probe mess,
if probe order is unusual.

like this example
[    2.553833] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178
[    2.561401] gpiochip_find_base: found new base at 160
[    2.564392] gpio gpiochip5: (twl4030): added GPIO chardev (254:5)
[    2.564544] gpio gpiochip5: registered GPIOs 160 to 177 on twl4030
[...]
[    2.692169] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    2.697357] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    2.703643] gpiochip_find_base: found new base at 178
[    2.704376] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
[    2.704589] gpio gpiochip6: registered GPIOs 178 to 181 on omap-gpmc
[...]
[    2.840393] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.849365] gpio gpiochip7: (gpio-160-191): GPIO integer space overlap, cannot add chip
[    2.857513] gpiochip_add_data_with_key: GPIOs 160..191 (gpio-160-191) failed to register, -16
[    2.866149] omap_gpio 48310000.gpio: error -EBUSY: Could not register gpio chip

So probing was done in an unusual order, causing mess
and chips not getting their gpio in the end.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:29 +01:00
Marc Zyngier 989c78f25a gpio: omap: Move PM device over to irq domain
Move the reference to the device over to the irq domain.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220201120310.878267-8-maz@kernel.org
2022-02-09 13:36:53 +00:00
Andy Shevchenko 448cf90513 gpio: Get rid of duplicate of_node assignment in the drivers
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

While at it, remove duplicate parent device assignment where it is the case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-17 17:39:35 +01:00
Marc Zyngier dbd1c54fc8 gpio: Bulk conversion to generic_handle_domain_irq()
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-08-12 11:39:38 +01:00
Linus Torvalds 5d6a1b84e0 gpio updates for v5.13
- new driver for the Realtek Otto GPIO controller
 - ACPI support for gpio-mpc8xxx
 - edge event support for gpio-sch (+ Kconfig fixes)
 - Kconfig improvements in gpio-ich
 - fixes to older issues in gpio-mockup
 - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
 - improve the GPIO aggregator code by using more generic interfaces instead of
   reimplementing them in the driver
 - convert the DT bindings for gpio-74x164 to yaml
 - documentation improvements
 - a slew of other minor fixes and improvements to GPIO drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmCSptQACgkQEacuoBRx
 13KFDQ/+NOkRQuJarKAvGuR5LJ81CbBfH72/m9gJMB9gwNBS7g+esNWrZG/riWVM
 BVs2fxlC52+ppN1rV7iMEaXSyREULrcidgoZ0H7X2vsI9MRkk/fjzpTRwbJbSLPo
 C+IXBAHHfuUC1FQNtQk1cuZXl7PToHd/A14KZIkLOBxLjQddpSo7TTkv23Ub1BA7
 Se13EaDrBJxzfmLR900kAKCFDyM8VRnIt7/euhmlTcXCxOg/lCbGZ4eBpEZasUs5
 UA9PQX0dnnwtMER4b4TQPIdQ345A0l+xqALr8X2leqQ0AqsWQ7kveMwfSRlXI5Hr
 zyuXRiA0e84h6HXIHE59kXqoa4LJVnW59hgjYx0D+fcZ5gNVnaRg/4LsztJmMd/f
 uVAZazE4jd81Cr/kbtpEu5mfGPjOVBeUCeDnKtRovnaSMi24HwqvHqIauI9sM8fN
 locTCYOdLfvxucAJHZ/BWe8yl301/+IlwiHiN+7+/3ljYB+HjAH42rdPwFpP1BWJ
 bpgd90KxLHezeqsv83U9CTTrVK9ZM2yisVunQUo3bVi6Ztxl2Juv16P5Qs0IJW2F
 mly+KNTa4M6NKCdP6luEnazmifFIsnreCzTMfPoa9w+eu/vpIw6lZDFpDAbePV+A
 8XJ99TxV1Bk9kUjvKiEi2qx6uW7f5k8JIwvRvJWhRXkEzufJyUI=
 =5vLN
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:

 - new driver for the Realtek Otto GPIO controller

 - ACPI support for gpio-mpc8xxx

 - edge event support for gpio-sch (+ Kconfig fixes)

 - Kconfig improvements in gpio-ich

 - fixes to older issues in gpio-mockup

 - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055

 - improve the GPIO aggregator code by using more generic interfaces
   instead of reimplementing them in the driver

 - convert the DT bindings for gpio-74x164 to yaml

 - documentation improvements

 - a slew of other minor fixes and improvements to GPIO drivers

* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
  dt-bindings: gpio: add YAML description for rockchip,gpio-bank
  gpio: mxs: remove useless function
  dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
  gpio: it87: remove unused code
  gpio: 104-dio-48e: Fix coding style issues
  gpio: mpc8xxx: Add ACPI support
  gpio: ich: Switch to be dependent on LPC_ICH
  gpio: sch: Drop MFD_CORE selection
  gpio: sch: depends on LPC_SCH
  gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
  gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
  gpio: sch: Add edge event support
  gpio: aggregator: Replace custom get_arg() with a generic next_arg()
  lib/cmdline: Export next_arg() for being used in modules
  gpio: omap: Use device_get_match_data() helper
  gpio: Add Realtek Otto GPIO support
  dt-bindings: gpio: Binding for Realtek Otto GPIO
  docs: kernel-parameters: Add gpio_mockup_named_lines
  docs: kernel-parameters: Move gpio-mockup for alphabetic order
  lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
  ...
2021-05-05 12:39:29 -07:00
Tian Tao ca40daf39d gpio: omap: Use device_get_match_data() helper
Use the device_get_match_data() helper instead of open coding.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-05-05 16:07:40 +02:00
Tony Lindgren ddd8d94ca3 gpio: omap: Save and restore sysconfig
As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.

We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.

Fixes: b764a5863f ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-04-21 16:43:51 +02:00
Linus Walleij 40b37008eb gpio updates for v5.11-rc1
- several refactoring patches of the core gpiolib code
 - add support for NXP PCAL9554B/C to gpio-pca953x
 - allow probing mockup devices from device tree
 - refactoring and improvements to gpio-rcar
 - improvements to locking in gpio-tegra
 - code shrink in gpiolib devres
 - get the irq offset from device tree in gpio-sifive
 - major refactoring of gpio-exar
 - convert gpio-mvebu pwm access to regmap
 - create a new submenu for virtual GPIO drivers
 - fix clang fall-through warnings treewide
 - minor driver refactoring and tweaks sprinkled all over
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl/QnM8ACgkQEacuoBRx
 13LkDw/+NKHc32hKgMJmSsLLFHgZ8XB+7Y775G5Ejxj+4Z0hVY9LdqL0zSYwrzCg
 D2dKwrKMtM83T8vf0bVbPdZ/9uuqrljvocGYt2CFmDqQa3sSlJkyDiSak2HAqjK/
 p9cgDQaUIlDrg2xh/1kSqELQoONmp4m82i++bItIwxIqAwPWfjSHVD7EQznDu0QD
 MJ7eYSuVlpeBhMwfyGCYSuUFhd4wN+nTkLTYw3nNlU4PHCKpdgYd7SBCJjSsLAhM
 8FOQ+PBspS6t8lPIEa4Mt+TOWUbbboGUBy40GPNU8QcUjbzj3TwPIBJu/0SIdSOy
 fBrk+GRjWtJ9shSlz0WQ19mG+qMjIiw4xLY1Jh3Tr4b75bQ3a4pk50aPWNE6bbHV
 NP1wZer/s06f1TQFKjfuDVFsOoRLyrTuOzlW0COAHoqFOdgimZi36xtjaS3AL3lE
 POBiBxFo9VaQ0enD99QMBt3940IP3ekRmlqRxeR1t8C0gE5np8IMZ5Dti8Fh4eCN
 hUQTDDuWQadluOdhMdLCBh5cA3VfZY8xksAMBzAYnSUHzM2D8TcKVjfJeegCEuZd
 kapAV3nLUv1/ZU36okFpMaHaKBL+xGDv8gtV2ro7rptkm6khNPQ3hxKvRbCRCG+S
 fO6IKThwozZEL/uVvsZLRKvN47g89oAGYYfasqq49932WChVKf8=
 =RmnM
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio updates for v5.11-rc1

- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
2020-12-09 15:17:24 +01:00
Grygorii Strashko 2ae136a34f gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()
The gpiochip_add_data() may return -EPROBE_DEFER which is not handled
properly by TI GPIO driver and causes unnecessary boot log messages.

Hence, add proper deferred probe handling with new dev_err_probe() API.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:38:28 +01:00
Tony Lindgren 7ffa081698 Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
This reverts commit 579ced8fdb.

Turns out I was overly optimistic about cpu_pm blocking idle being a
solution for handling edge interrupts. While it helps in preventing
entering idle states that potentially lose context, we can still get
an edge interrupt triggering while entering idle. So we need to also
add back the workaround for seeing if there are any pending edge
interrupts when waking up.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20201028060556.56038-1-tony@atomide.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28 16:40:47 +01:00
Linus Torvalds 0486beaf88 GPIO bulk changes for the v5.10 kernel cycle:
Core changes:
 
 - The big core change is the updated (v2) userspace character
   device API. This corrects badly designed 64-bit alignment around
   the line events. We also add the debounce request feature.
   This echoes the often quotes passage from Frederick Brooks
   "The mythical man-month" to always throw one away, which we
   have seen before in things such as V4L2. So we put in a new
   one and deprecate and obsolete the old one.
 
 - All example tools in tools/gpio/* are migrated to the new API
   to set a good example. The libgpiod userspace library has been
   augmented to use this new API pretty much from day 1.
 
 - Some misc API hardening by using strn* function calls has been
   added as well.
 
 - Use the simpler IDA interface for GPIO chip instance enumeration.
 
 - Add device core function for counting string arrays in
   device properties.
 
 - Provide a generic library function kfree_strarray() that can
   be used throughout the kernel.
 
 Driver enhancements:
 
 - The DesignWare dwapb-gpio driver has been enhanced and now
   uses the IRQ handling in the gpiolib core.
 
 - The mockup and aggregator drivers have seen some substantial
   code clean-up and now use more of the core kernel
   inftrastructure.
 
 - Misc cleanups using dev_err_probe().
 
 - The MXC drivers (Freescale/NXP) can now be built modularized,
   which makes modularized GKI Android kernels happy.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl+FdjkACgkQQRCzN7AZ
 XXMYgQ/+JgpHrp7yS1IkS1KiAxHdeIGnKzloTCQQo1JxYEymAnIeMwo/iWAk5wHu
 NeJIEVxD0YzZwoI3BXbnO5Qy/62g1z7Ik8ToIa0TiFMwYxz5a7lqsiHwpBgHa50h
 T2N8FRFdslVrhpUYBH4Q9wlfYxTki4FwdTD6aaoFFGcMwIVJXWyaYzE+o+qEUEne
 VaPsGoNhRKTdKASP3c6+zbbPonzpZW7s/wvIBQAyBgPxEizlL97RzzX3bSSraoCX
 i0NsDLHMe+9twqE064KN+CYu0Cy80etQSQsYcfnstVshMuY9+WC1YdyJqzYMciuQ
 CYUIQBeskft86IBlsEU/fNCbV+FeAgrxRW6TJK7Hn+sUWZ5+UGdpJ03UE1hA3jjO
 SniwG0vpqvZIkio49B6h51VdjNqVJn+AE8tN3hCzqpFknblXgJOVysD7RS7rNM6D
 flV1bCsUYtC6jN43qsGFiRYLE9ml2iUxFFoBQUaAEh+pXgUzPTQqD7aSjyzmE3x2
 uapKXgxN0dCNH+tFXij73Ro4bYf4ZTZhx3Z3XoEUNEyJpl8fE1bv1SZ2EykOmK8g
 c78fAmT0vG3xYZvK10WZj4zuHV6GlPAYVm/MlhB7QHsrF3wa9vervOuqhEPmp2th
 hTsVj/Zlz0SSDLncMQL64B7gbxOmzOYlVRxIkSrDEXUOFU7kiWE=
 =8CE2
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This time very little driver changes but lots of core changes.

  We have some interesting cooperative work for ARM and Intel alike,
  making the GPIO subsystem more and more suitable for industrial
  systems and the like, in addition to the in-kernel users.

  We touch driver core (device properties) and lib/* by adding one
  simple string array free function, these are authored by Andy
  Shevchenko who is a well known and recognized core helpers maintainers
  so this should be fine.

  We also see some Android GKI-related modularization in the MXC
  drivers.

  Core changes:

   - The big core change is the updated (v2) userspace character device
     API.

     This corrects badly designed 64-bit alignment around the line
     events. We also add the debounce request feature. This echoes the
     often quotes passage from Frederick Brooks "The mythical man-month"
     to always throw one away, which we have seen before in things such
     as V4L2. So we put in a new one and deprecate and obsolete the old
     one.

   - All example tools in tools/gpio/* are migrated to the new API to
     set a good example. The libgpiod userspace library has been
     augmented to use this new API pretty much from day 1.

   - Some misc API hardening by using strn* function calls has been
     added as well.

   - Use the simpler IDA interface for GPIO chip instance enumeration.

   - Add device core function for counting string arrays in device
     properties.

   - Provide a generic library function kfree_strarray() that can be
     used throughout the kernel.

  Driver enhancements:

   - The DesignWare dwapb-gpio driver has been enhanced and now uses the
     IRQ handling in the gpiolib core.

   - The mockup and aggregator drivers have seen some substantial code
     clean-up and now use more of the core kernel inftrastructure.

   - Misc cleanups using dev_err_probe().

   - The MXC drivers (Freescale/NXP) can now be built modularized, which
     makes modularized GKI Android kernels happy"

* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
  gpiolib: Update header block in gpiolib-cdev.h
  gpiolib: cdev: switch from kstrdup() to kstrndup()
  docs: gpio: add a new document to its index.rst
  gpio: pca953x: Add support for the NXP PCAL9554B/C
  tools: gpio: add debounce support to gpio-event-mon
  tools: gpio: add multi-line monitoring to gpio-event-mon
  tools: gpio: port gpio-event-mon to v2 uAPI
  tools: gpio: port gpio-hammer to v2 uAPI
  tools: gpio: rename nlines to num_lines
  tools: gpio: port gpio-watch to v2 uAPI
  tools: gpio: port lsgpio to v2 uAPI
  gpio: uapi: document uAPI v1 as deprecated
  gpiolib: cdev: support setting debounce
  gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
  gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
  gpiolib: cdev: support edge detection for uAPI v2
  gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
  gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
  gpiolib: add build option for CDEV v1 ABI
  gpiolib: make cdev a build option
  ...
2020-10-13 10:09:33 -07:00
Krzysztof Kozlowski 4e7ed69685 gpio: omap: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28 20:15:23 +02:00
Tony Lindgren d3f99f9183 gpio: omap: Fix warnings if PM is disabled
Fix warnings for omap_gpio_resume and omap_gpio_suspend
defined but not used when PM is disabled as noticed when
doing make randconfig builds.

Fixes: f02a03985d ("gpio: omap: Add missing PM ops for suspend")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-19 18:16:16 +02:00
Drew Fustini bde8c0e64c gpio: omap: improve coding style for pin config flags
Change the handling of pin config flags from if/else to switch
statement to make the code more readable and cleaner.

Suggested-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722120755.230741-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-23 15:05:23 +02:00
Drew Fustini 75dec56710 gpio: omap: handle pin config bias flags
Modify omap_gpio_set_config() to handle pin config bias flags by calling
gpiochip_generic_config().

The pin group for the gpio line must have the corresponding pinconf
properties:

PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"

This is necessary for pcs_pinconf_set() to find the requested bias
parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.

Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200715213738.1640030-1-drew@beagleboard.org
Link: https://lore.kernel.org/r/20200717194043.1774643-1-drew@beagleboard.org
2020-07-20 16:04:41 +02:00
Tony Lindgren f02a03985d gpio: omap: Add missing PM ops for suspend
We've had the legacy platform code take care of suspend for us but
this no longer is the case when probed without legacy mode with
ti-sysc. We need to configure PM ops like standard Linux device
drivers do.

As we still have some SoCs booting also the legacy mode, we need to
add omap_gpio_suspend() and omap_gpio_resume(), and check for the
is_suspended flag to avoid legacy _od_suspend_noirq() calling them
on an already suspended GPIO instance.

Once we have no SoCs booting in legacy mode, we can just switch to
using the standard PM ops with pm_runtime_force_suspend() and
pm_runtime_force_resume().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-30 11:02:45 +02:00
Tony Lindgren 579ced8fdb Revert "gpio: omap: Fix lost edge wake-up interrupts"
This reverts commit a522f1d0c3.

With cpu_pm handling fixed for omaps, and with gpio-omap now returning
notify error on pending interrupts, we can drop the old workaround for
seeing if there may be pending edge interrupts.

Depends-on: ARM: OMAP2+: Handle errors for cpu_pm
Depends-on: gpio: omap: Block idle on pending gpio interrupts
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200304225433.37336-4-tony@atomide.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09 10:24:46 +01:00
Tony Lindgren 43582265be gpio: omap: Block idle on pending gpio interrupts
With the SoC cpuidle handling fixed for cpu_pm, we can now start to
return NOTIFY_BAD if there there are pending gpio interrupts.

This way the deeper SoC idle states can get blocked, and gpio latency
is improved in some cases. Note that this will not help with the
latency if the SoC has already entered a deeper idle state.

Note that this patch depends on cpu_pm properly handling the errors
returned by notifiers. For omap variants, this is fixed with patch
"ARM: OMAP2+: Handle errors for cpu_pm".

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200304225433.37336-3-tony@atomide.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09 10:24:23 +01:00
Matti Vaittinen e42615ec23 gpio: Use new GPIO_LINE_DIRECTION
It's hard for occasional GPIO code reader/writer to know if values 0/1
equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT to help them out.

NOTE - for gpio-amd-fch and gpio-bd9571mwv:
This commit also changes the return value for direction get to equal 1
for direction INPUT. Prior this commit these drivers might have
returned some other positive value but 1 for INPUT.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-07 09:27:48 +01:00
Linus Torvalds 2ec98f5678 Bulk GPIO changes for the v5.3 kernel cycle:
Core:
 
 - When a gpio_chip request GPIOs from itself, it can now fully
   control the line characteristics, both machine and consumer
   flags. This makes a lot of sense, but took some time before I
   figured out that this is how it has to work.
 
 - Several smallish documentation fixes.
 
 New drivers:
 
 - The PCA953x driver now supports the TI TCA9539.
 
 - The DaVinci driver now supports the K3 AM654 SoCs.
 
 Driver improvements:
 
 - Major overhaul and hardening of the OMAP driver by Russell
   King.
 
 - Starting to move some drivers to the new API passing irq_chip
   along with the gpio_chip when adding the gpio_chip instead
   of adding it separately.
 
 Unrelated:
 
 - Delete the FMC subsystem.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl0i7gEACgkQQRCzN7AZ
 XXOeUA/+JKyI2zebTWBcgtxhn6VQCufMCtFmQl2JkEcy4pT7aBJcGWqFQCBW2Szf
 VTtqc8nNa90SZoOzsNbkeQgRjNKGZruMbh0ARUPcW4v3ZJHtUNUEDLTo8c3iyTgS
 9k/FTeaTLt4WSZujeAO0O7G4KNnOOlTKLh58dr0PmXUR+0v+fbMhcJqJ9ABueV+V
 qENdpkTuG1ZcvzgLhBBEXdt3Plw9ICLWmPXtwY+784ewucVPbyQX7jV4+bBZ25fL
 DerCuMIgL5vRWWdiFO6/Jp603rHzZpTnjLJJocXUFiD6zA5rvU2jTWxsnUttjisg
 8cTLMyQspsDvBxhEhCJVTuIKotbKH900TSaz+vx20W72/A1euy4y6uVi8FGZo4Ww
 KDkzB7anwHyEFKGnlYgHzDrfctgZrhQoyFz808DQRYg1JseZB5oGVDvScrPBD43j
 nbNDd8gwG4yp3tFnDx9xjIwQy3Ax4d510rAZyUN2801IlbA1bueq4t6Z2cCucWzX
 XA1gCKlXe4BUeitRAoZtqZNZG1ymEysW4jXy1V8xrwtAf8+QSN+xO98akz3VpnQL
 ae9q+HtF76fDBY1xFSXT37Ma3+4OR2vMF9QWuo4TCb9j1cL7llf8ZxtUq9LEHbDu
 erKLSSnwSFmqJNGSEA5SulGOCR/tRPkClngE9x0XEM6gOD+bs6E=
 =8zSV
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...
2019-07-09 09:07:00 -07:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Tony Lindgren a522f1d0c3 gpio: omap: Fix lost edge wake-up interrupts
If an edge interrupt triggers while entering idle just before we save
GPIO datain register to saved_datain, the triggered GPIO will not be
noticed on wake-up. This is because the saved_datain and GPIO datain
are the same on wake-up in omap_gpio_unidle(). Let's fix this by
ignoring any pending edge interrupts for saved_datain.

This issue affects only idle states where the GPIO module internal
wake-up path is operational. For deeper idle states where the GPIO
module gets powered off, Linux generic wakeirqs must be used for
the padconf wake-up events with pinctrl-single driver. For examples,
please see "interrupts-extended" dts usage in many drivers.

This issue can be somewhat easily reproduced by pinging an idle system
with smsc911x Ethernet interface configured IRQ_TYPE_EDGE_FALLING. At
some point the smsc911x interrupts will just stop triggering. Also if
WLCORE WLAN is used with EDGE interrupt like it's documentation specifies,
we can see lost interrupts without this patch.

Note that in the long run we may be able to cancel entering idle by
returning an error in gpio_omap_cpu_notifier() on pending interrupts.
But let's fix the bug first.

Also note that because of the recent clean-up efforts this patch does
not apply directly to older kernels. This does fix a long term issue
though, and can be backported as needed.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 14:32:04 +02:00
Russell King 754dfd7992 gpio: omap: clean up register access in omap2_set_gpio_debounce()
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:15:10 +02:00
Russell King f1c32ef14b gpio: omap: irq_startup() must not return error codes
The irq_startup() method returns an unsigned int, but in __irq_startup()
it is assigned to an int.  However, nothing checks for errors, so any
error that is returned is ignored.

Remove the check for GPIO-input mode and the error return.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:15:04 +02:00
Russell King 40fd422a7d gpio: omap: clean up wakeup handling
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:59 +02:00
Russell King 18bd49c4c7 gpio: omap: constify register tables
We must never alter the register tables; these are read-only as far
as the driver is concerned.  Constify these tables.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:54 +02:00
Russell King 9c7f798d17 gpio: omap: clean up omap_gpio_restore_context()
Use local variables to store the base iomem address and regs table
pointer like omap_gpio_init_context() does. Not only does this make
the function neater, it also avoids unnecessary reloads of the same
data multiple times.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:48 +02:00
Russell King 9a30278122 gpio: omap: remove dataout variation in context handling
When a GPIO block has the set/clear dataout registers implemented, it
also has the normal dataout register implemented. Reading this register
reads the current GPIO output state, and writing it sets the GPIOs to
the explicit state. This is the behaviour that we want when saving and
restoring the context, so use the dataout register exclusively.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:42 +02:00
Russell King 31b2d7f7cc gpio: omap: simplify omap_set_gpio_irqenable()
omap_set_gpio_irqenable() calls two helpers that are almost the same
apart from whether they set or clear bits. We can consolidate these:

- in the set/clear bit register case, we can perform the operation on
  our saved context copy and write the appropriate set/clear register.
- otherwise, we can use our read-modify-write helper and invert enable
  if irqenable_inv is set.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:36 +02:00
Russell King a47b91587f gpio: omap: simplify omap_toggle_gpio_edge_triggering()
This function open-codes an exclusive-or bitwise operation using an
if() statement and explicitly setting or clearing the bit. Instead,
use an exclusive-or operation instead, and simplify the function.

We can combine the preprocessor conditional using IS_ENABLED() and
gain some additional compilation coverage.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:30 +02:00
Russell King 8ee1de65a9 gpio: omap: simplify read-modify-write
We already have a read-modify-write helper, but there's more that can
be done with a read-modify-write helper if it returned the new value.
Modify the existing helper to return the new value, and arrange for
it to take one less argument by having the caller compute the register
address.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:23 +02:00
Russell King a0e881e2c5 gpio: omap: simplify bank->level_mask
bank->level_mask is merely the bitwise or of the level detection
context which we have already read in this function.  Rather than
repeating additional reads, compute it from the values already
read.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:16 +02:00
Russell King 8ba705957f gpio: omap: simplify set_multiple()
One of the reasons for set_multiple() to exist is to allow multiple
GPIOs on the same chip to be changed simultaneously - see commit
5f42424354 ("gpiolib: allow simultaneous setting of multiple GPIO
outputs"):

 - Simultaneous glitch-free setting of multiple pins on any kind of
   parallel bus attached to GPIOs provided they all reside on the
   same chip and bank.

In order for this to work, we should not use the atomic set/clear
registers, but instead read-modify-write the dataout register.  We
already take the spinlock to ensure that happens atomically, so
move the code into the set_multiple() function and kill the two
helper functions.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:14:01 +02:00
Russell King 6653dd88cf gpio: omap: simplify get_multiple()
There is no reason to have helper functions to read the datain and
dataout registers when they are only used in one location.  Simplify
this code to make it more readable.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:53 +02:00
Russell King 5ca5f92c1a gpio: omap: simplify get() method
omap_gpio_get() calls omap_get_gpio_datain() or omap_get_gpio_dataout()
to read the GPIO state. These two functions are only called from this
method, so they don't add much value.  Move their contents into
omap_gpio_get() method and simplify.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:47 +02:00
Russell King 40bb2273a2 gpio: omap: simplify omap_gpio_get_direction()
Architectures are single-copy atomic, which means that simply reading
a register is an inherently atomic operation.  There is no need to
take a spinlock here.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:41 +02:00
Russell King dfbc6c7a1d gpio: omap: move omap_gpio_request() and omap_gpio_free()
Move these two functions to live beside the rest of the gpio chip
implementation, rather than in the middle of the irq chip
implementation.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:34 +02:00
Russell King 693de831c6 gpio: omap: remove irq_ack method
The irq_ack method does not fit our hardware requirements. Edge
interrupts must be cleared before we handle them, and level interrupts
must be cleared after handling them.

We handle the interrupt clearance in our interrupt handler for edge IRQs
and in the unmask method for level IRQs.

Replace the irq_ack method with the no-op method from the dummy irq
chip.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:26 +02:00
Russell King 395373c721 gpio: omap: clean up edge interrupt handling
The edge interrupt handling was effectively:

	isr = ISR_reg & enabled;
	if (bank->level_mask)
		level_mask = bank->level_mask & enabled;
	else
		level_mask = 0;

	edge = isr & ~level_mask;

When bank->level_mask is zero, level_mask will be computed as zero
anyway, so the if() statement is redundant.  We are then left with:

	isr = ISR_reg & enabled;
	level_mask = bank->level_mask & enabled;
	edge = isr & ~level_mask;

This can be simplified further to:

	isr = ISR_reg & enabled;
	edge = isr & ~bank->level_mask;

since the second mask with 'enabled' is redundant.

Improve the associated comment as well.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:20 +02:00
Russell King c030a9c96b gpio: omap: remove remainder of list management
Commit c4791bc6e3 ("gpio: omap: drop omap_gpio_list") removed the
list head and addition to the list head of each gpio bank, but failed
to remove the list_del() call and the node inside struct gpio_bank.
Remove these too.

Fixes: c4791bc6e3 ("gpio: omap: drop omap_gpio_list")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:12 +02:00
Russell King 64ea3e9094 gpio: omap: fix lack of irqstatus_raw0 for OMAP4
Commit 384ebe1c28 ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e8998 ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.

This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.

Fixes: 4e962e8998 ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:13:05 +02:00
Russell King c859e0d479 gpio: omap: ensure irq is enabled before wakeup
Documentation states:

  NOTE: There must be a correlation between the wake-up enable and
  interrupt-enable registers. If a GPIO pin has a wake-up configured
  on it, it must also have the corresponding interrupt enabled (on
  one of the two interrupt lines).

Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt.  This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.

If we do any clearing, clear between the interrupt enable/disable and
trigger setting.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 11:12:44 +02:00
Russell King 044e499acd gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
Commit b764a5863f ("gpio: omap: Remove custom PM calls and use cpu_pm
instead") moved interrupt using GPIO banks to idle with cpu_pm in order
to drop the use of pm_runtime_irq_safe() in a later patch. The GPIO
banks with no interrupts claimed are still being idled based on PM
runtime calls. However this caused a regression for am437x suspend for
rtc+ddr idle mode where the device cannot enter idle state as reported
by Keerthy <j-keerthy@ti.com>.

To fix the issue, we must not fail the pm_runtime callbacks. For GPIO
interrupts, we already have irq_chip_pm_get increment the PM runtime
use count as pointed out by Grygorii Strashko <grygorii.strashko@ti.com>.

So all we need to do is remove the conditional handling in the
runtime_suspend and resume functions and let the CPU PM notifier idle
the GPIO banks.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes: b764a5863f ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: updated patch description, dropped runtime count changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-11 15:16:26 +02:00
Russell King e6818d29ea gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
The GPIO block can enter idle independently of the CPU power management
calls via smart-idle.  When the GPIO block enters idle, level detection
stops working due to clocks being shut off, and an alternative form of
edge detection is used.  However, this needs the edge detection
registers set to mark the appropriate edges.

Arrange to configure the edge detection enables along with the level
detection to ensure that any transition to active interrupt state that
occurs while the block is idle is detected as a wake-up event.

Since we enable the edge detection when configuring the IRQ, both
omap2_gpio_enable_level_quirk() nor omap2_gpio_disable_level_quirk()
become redundant, which also means OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER
can be removed. This can be now done without regressions as patch
"gpio: gpio-omap: fix level interrupt idling" allows level interrupts
to idle on omap4 without a workaround.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: update description for the fix dependency]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-11 15:13:33 +02:00
Linus Walleij 4779a066e7 gpio: updates for v5.2 (part 1)
- batch of improvements for the vf610 driver which shrink the code and
   make use of resource managed helpers
 - support for a new variant of pca953x
 - make gpio-mockup buildable on systems without IOMEM
 - make gpio-74x164 more flexible by using generic device properties
   plus minor improvements
 - new driver for Mellanox BlueField
 - fixes for wakeup GPIOs in gpio-omap
 - use devm_platform_ioremap_resource() in gpio-mxc
 - a couple improvements of kernel docs for ACPI code
 - don't WARN() in gpiod_put() on optional GPIOs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlyrR7kACgkQEacuoBRx
 13KSJg/+NCSqM0OBMylRdNwfwQvpHj7Fp/6IRVVSpIetaVafPcPJ7TJtHeSBCE9X
 F9Cqpe9UlqLuBI+LXIIYLdsltirmhFfAUkhQvpFlUj4w9YyKojbISCgswUPMwFJ8
 JM6uiZaCHrHD7Q6m0znwmOJsCm/OOMhrjPWFrRTZNZOGl86eB/FifPvlWW/+GIkv
 RutHf+qiC7TkIpZO/mn4RIKwCOamFZvqUGTxasBU3+xwFrVlRW1ER8oWvSUjI8io
 OLNY25lgr8zfVCeBL9RDGTrS2R6HDt3ibkNO1mZfsADIKQxhl/U9UopIupCKA1we
 4tID5qLLm320vTVS+kUmrroKL7mNc7u9J7fo7AcrR03dn9697bBogrxTobCuw39r
 Alpm1SjsftfWyEIyNC+w+pvB7l8iLxFa7WeTTW4W+JSmrOMGp8xuCGAo1jNm/2CL
 ljs4BXYvhDgVMQwvgFm9B3r7Lyo4K83pbnScu2BGhWvmotXxQ37jL8GRM6EZFY3E
 rcZOiqqE6GlUXuO0hwiBqJsMzRLBHsHlX7yS7sajOx3tTyIOhLkDGt20YVsj1gVP
 I0438QZ4MeAiWnIpxMDjntPxPX92TwAP90sYX9ix0bJ12NbIQb+105TKYJnHj2eL
 LEEVrN4AUkSA7WFXPEAAxKEG9Z0dhagDtxsW+ZNwS4SvLEVl/Kc=
 =mSS+
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.2-updates-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio: updates for v5.2 (part 1)

- batch of improvements for the vf610 driver which shrink the code and
  make use of resource managed helpers
- support for a new variant of pca953x
- make gpio-mockup buildable on systems without IOMEM
- make gpio-74x164 more flexible by using generic device properties
  plus minor improvements
- new driver for Mellanox BlueField
- fixes for wakeup GPIOs in gpio-omap
- use devm_platform_ioremap_resource() in gpio-mxc
- a couple improvements of kernel docs for ACPI code
- don't WARN() in gpiod_put() on optional GPIOs
2019-04-08 15:48:11 +02:00
Enrico Weigelt, metux IT consult 58f57f864c gpio: omap: use devm_platform_ioremap_resource()
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-05 00:04:28 +07:00
Arnd Bergmann 7c68571f77 gpio: omap: avoid clang warning
clang warns about a tentative array definition in the gpio-omap driver:

drivers/gpio/gpio-omap.c:1282:34: error: tentative array definition assumed to have one element [-Werror]
static const struct of_device_id omap_gpio_match[];

It's best to just reorder the entire file to avoid forward declarations,
which lets us use the regular declaration. To do this, the unnecessary
CONFIG_OF check must also be removed.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-05 00:04:28 +07:00
Tony Lindgren da38ef3ed1 gpio: gpio-omap: add check for off wake capable gpios
We are currently assuming all GPIOs are non-wakeup capable GPIOs as we
not configuring the bank->non_wakeup_gpios like we used to earlier with
platform_data.

Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer
while considering that later patches may want to configure SoC specific
bank->non_wakeup_gpios for the GPIOs in wakeup domain.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27 14:26:14 +01:00
Tony Lindgren 06dce84ec7 gpio: gpio-omap: always scan for triggered non-wakeup capable interrupts
The bank->workaround_enabled should be for omap24xx erratum 1.101 but is not
needed any longer as erratum 1.101 handling only needs to happen based on
!bank->loses_context with patch "gpio: omap: Limit errata 1.101 handling to
wkup domain gpios only".

Further Grygorii Strashko <grygorii.strashko@ti.com> points out that we are
now tagging all edge GPIOs as non-wakeup GPIOs and rely on original erratum
1.101 handling for scacnning for edge interrupts that have triggered during
idle.

Also the TI Android kernel tree has an earlier commit "GPIO: OMAP: Always
scan gpios during runtime resume" by Tero Kristo <t-kristo@ti.com> saying:

 "This allows the driver to generate interrupts for GPIOs that can't
  wakeup but have changed state during runtime suspend. We cannot
  depend on the decision based on no need to restore, as the system
  state might change and pending events could gather up."

So let's remove bank->workaround_enabled and always scan for triggered edge
interrupts on resume. We do that based on bank->enabled_non_wakeup_gpios.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27 14:25:46 +01:00
Tony Lindgren 21e2118f47 gpio: gpio-omap: limit errata 1.101 handling to wkup domain gpios only
We need to only apply errata 1.101 handling to clear non-wakeup edge gpios
for idle to the gpio bank(s) in the wkup domain to prevent spurious wake-up
events.

And we must restore what we did after idle manually as the gpio bank in
wkup domain is not restored otherwise.

Let's keep bank->saved_datain register reading separate, that's not related
to the 1.101 errata and is used separately on restore.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27 14:25:37 +01:00