Commit Graph

84 Commits

Author SHA1 Message Date
Konrad Dybcio faf28e240d cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-01-04 12:05:06 +05:30
Sumit Gupta 01c5bb0cc2 cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-12-27 08:27:14 +05:30
Hector Martin 6286bbb405 cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
This driver implements CPU frequency scaling for Apple Silicon SoCs,
including M1 (t8103), M1 Max/Pro/Ultra (t600x), and M2 (t8112).

Each CPU cluster has its own register set, and frequency management is
fully automated by the hardware; the driver only has to write one
register. There is boost frequency support, but the hardware will only
allow their use if only a subset of cores in a cluster are in
non-deep-idle. Since we don't support deep idle yet, these frequencies
are not achievable, but the driver supports them. They will remain
disabled in the device tree until deep idle is implemented, to avoid
confusing users.

This driver does not yet implement the memory controller performance
state tuning that usually accompanies higher CPU p-states. This will be
done in a future patch.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-11-30 11:12:18 +05:30
Dave Gerlach e66e20d71d cpufreq: dt-platdev: Blacklist ti,am625 SoC
Add ti,am625 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes so it is not
created twice.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-11-07 15:30:11 +05:30
Adam Skladowski 0612d928b7 cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
The Qualcomm SM6115 platform uses the
qcom-cpufreq-hw driver, so add it to the cpufreq-dt-platdev driver's
blocklist.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-08-16 10:50:49 +05:30
AngeloGioacchino Del Regno be4b61ec45 cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
This SoC shall use the mediatek-cpufreq driver, or the system will
crash upon any clock scaling request: add it to the cpufreq-dt-platdev
blocklist.

Fixes: 39b360102f ("cpufreq: mediatek: Add support for MT8186")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28 13:34:56 +05:30
Bjorn Andersson 72951a77c0 cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
The Qualcomm sc8280xp and sa8540p platforms also uses the
qcom-cpufreq-hw driver, so add them to the cpufreq-dt-platdev driver's
blocklist.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-02-25 10:09:05 +05:30
Stefan Agner bc8b0c271b cpufreq: Add i.MX7S to cpufreq-dt-platdev blocklist
The i.MX 7Solo currently does not have multiple operating points,
however, in order for the i.MX Thermal driver to successfully probe
a cpufreq device is required. Add it to the cpufreq-dt-platdev
driver's blocklist to allow using imx-cpufreq-dt.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-02-09 13:20:03 +05:30
Bjorn Andersson 5e79d6d9ea cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
The Qualcomm sa8155p, sm6350, sm8250 and sm8350 platforms also uses the
qcom-cpufreq-hw driver, so add them to the cpufreq-dt-platdev driver's
blocklist.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-30 10:43:35 +05:30
Thara Gopinath 5d79e5ce54 cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev
The Qualcomm sm8150 platform uses the qcom-cpufreq-hw driver, so
add it to the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-05 09:43:04 +05:30
Bjorn Andersson d66cd5dea5 cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev
The Qualcomm SC8180x platform uses the qcom-cpufreq-hw driver, so
it in the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-07-26 09:53:35 +05:30
Viresh Kumar 4814d9c5d3 cpufreq: dt: Rename black/white-lists
Rename them in accordance with the coding guidelines.

Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-05-24 11:16:46 +05:30
Fabien Parent 70d99a8f04 cpufreq: mediatek: add support for mt8365
Add compatible stirng for MediaTek MT8365 SoC. Add also the
compatible in the blacklist of the cpufreq-dt-platdev driver.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-05-20 09:24:59 +05:30
Sibi Sankar 17a8b0b6dd cpufreq: blacklist SC7280 in cpufreq-dt-platdev
Add SC7280 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-05-20 09:23:37 +05:30
Sudeep Holla fbb31cb805 cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev
Add "arm,vexpress" to cpufreq-dt-platdev blacklist since the actual
scaling is handled by the firmware cpufreq drivers(scpi, scmi and
vexpress-spc).

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-08 16:20:07 +05:30
Arnd Bergmann 7114ebffd3 cpufreq: remove tango driver
The tango platform is getting removed, so the driver is no
longer needed.

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: Update cpufreq-dt-platdev.c as well ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-01-21 09:34:46 +05:30
Fabien Parent 75118c8ef9 cpufreq: blacklist mt8516 in cpufreq-dt-platdev
Add MT8516 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'mediatek-cpufreq' driver.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-07 13:02:37 +05:30
Fabien Parent de4ca30958 cpufreq: mediatek: Add support for mt8167
Add compatible string for mediatek mt8167

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-07 13:02:37 +05:30
Alain Volmat 305accf3b5 cpufreq: dt-platdev: Blacklist st,stih418 SoC
Add st,stih418 SoC in the blacklist since the cpufreq driver
for this platform is already registering the driver.

Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-09-16 14:12:18 +05:30
Sibi Sankar fb091802d7 cpufreq: blacklist SC7180 in cpufreq-dt-platdev
Add SC7180 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-06-23 16:12:07 +05:30
Sibi Sankar 49ef12215f cpufreq: blacklist SDM845 in cpufreq-dt-platdev
Add SDM845 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-06-23 16:12:07 +05:30
Lad Prabhakar a6d1bfa055 cpufreq: dt: Add support for r8a7742
Add the compatible strings for supporting the generic cpufreq driver on
the Renesas RZ/G1H (R8A7742) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28 09:45:55 +05:30
Peng Fan a08e1b6c2d cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist
Add i.MX7ULP to cpufreq-dt-platdev blacklist.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28 09:45:54 +05:30
Ansuel Smith a8811ec764 cpufreq: qcom: Add support for krait based socs
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.

The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-20 09:59:57 +05:30
Anson Huang 24f371f77e cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
Add i.MX8MP to blacklist, so that imx-cpufreq-dt driver can handle
speed grading bits just like other i.MX8M SoCs.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-01-07 13:29:58 +05:30
Dmitry Osipenko 26a7a47510 cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
Both NVIDIA Tegra20 and Tegra30 SoCs should be blacklisted because CPU
OPPs use supported_hw and thus platdev isn't suitable for these SoCs.
Currently cpufreq-dt driver produces a bit annoying warning splats
during boot because valid OPPs are not found, this will be fixed once
tegra20-cpufreq driver will be update to support cpufreq-dt. The warnings
will also happen on older stable kernels using newer device-trees, thus
this patch should be backported to stable kernels as well.

Cc: <stable@vger.kernel.org>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 4053aa65c5 ("ARM: tegra: cardhu-a04: Add CPU Operating Performance Points")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-12-16 09:34:45 +05:30
Linus Torvalds fb3da48a86 Merge branch 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal management updates from Zhang Rui:

 - Fix a deadlock regression in thermal core framework, which was
   introduced in 5.3 (Wei Wang)

 - Initialize thermal control framework earlier to enable thermal
   mitigation during boot (Amit Kucheria)

 - Convert the Intelligent Power Allocator (IPA) thermal governor to
   follow the generic PM_EM instead of its own Energy Model (Quentin
   Perret)

 - Introduce a new Amlogic soc thermal driver (Guillaume La Roque)

 - Add interrupt support for tsens thermal driver (Amit Kucheria)

 - Add support for MSM8956/8976 in tsens thermal driver
   (AngeloGioacchino Del Regno)

 - Add support for r8a774b1 in rcar thermal driver (Biju Das)

 - Add support for Thermal Monitor Unit v2 in qoriq thermal driver
   (Yuantian Tang)

 - Some other fixes/cleanups on thermal core framework and soc thermal
   drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao)

* 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits)
  thermal: Fix deadlock in thermal thermal_zone_device_check
  thermal: cpu_cooling: Migrate to using the EM framework
  thermal: cpu_cooling: Make the power-related code depend on IPA
  PM / EM: Declare EM data types unconditionally
  arm64: defconfig: Enable CONFIG_ENERGY_MODEL
  drivers: thermal: tsens: fix potential integer overflow on multiply
  thermal: cpu_cooling: Reorder the header file
  thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF
  thermal: no need to set .owner when using module_platform_driver
  thermal: qcom: tsens-v1: Fix kfree of a non-pointer value
  cpufreq: qcom-hw: Move driver initialization earlier
  clk: qcom: Initialize clock drivers earlier
  cpufreq: Initialize cpufreq-dt driver earlier
  cpufreq: Initialize the governors in core_initcall
  thermal: Initialize thermal subsystem earlier
  thermal: Remove netlink support
  dt: thermal: tsens: Document compatible for MSM8976/56
  thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976
  MAINTAINERS: add entry for Amlogic Thermal driver
  thermal: amlogic: Add thermal driver to support G12 SoCs
  ...
2019-12-05 11:21:24 -08:00
Amit Kucheria 57db08f41b cpufreq: Initialize cpufreq-dt driver earlier
This allows HW drivers that depend on cpufreq-dt to initialize earlier.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/353c745d4ca1feff600bd44154c01c013f185ca4.1571656015.git.amit.kucheria@linaro.org
2019-11-07 07:00:26 +01:00
H. Nikolaus Schaller b7dbe349e1 ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for
With the driver installed, we can change the opp-v1 table format
to opp-v2.

In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
in the same patch, because doing either first breaks operation and
may make trouble in bisect.

We also can remove opp-v1 table for omap3-n950-n9 since its 1GHz
capability is now automatically detected.

We also fix a wrong OPP4 voltage for omap3430 which must be
0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject
this OPP.

Note: the high speed OPPs that were not available in the opp-v1 tables
are tagged "turbo-mode;" which means they are not automatically
activated by the govenors or cpu-freq.

To enable you have to write

echo 1 >/sys/devices/system/cpu/cpufreq/boost

Note: to hard disable an OPP in a board.dts file use e.g.

&cpu0_opp_table: {
	/delete-node/ opp1g-1000000000;	/* do not use */
};

or alternatively:

&cpu0_opp_table: {
	opp1g-1000000000 {
		status = "disabled";	/* do not use */
	};
};

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-10 16:11:50 +05:30
Viresh Kumar f75d2accca Merge branch 'cpufreq/qcom-updates' into cpufreq/arm/linux-next 2019-09-03 07:55:22 +05:30
Jorge Ramirez-Ortiz 248b5f297c cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
Add qcs404 to cpufreq-dt-platdev blacklist.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-09-03 07:55:00 +05:30
Andrew-sh.Cheng 9176b425bf cpufreq: mediatek: Add support for mt8183
Add compatible string for mediatek mt8183

Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
[ VK: Fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-08-22 11:31:04 +05:30
Anson Huang 8ec5035039 cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
Add i.MX8MN to blacklist, so that imx-cpufreq-dt driver can handle
speed grading bits just like other i.MX8M SoCs.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-08-22 11:31:04 +05:30
Yangtao Li f328584f7b cpufreq: Add sun50i nvmem based CPU scaling driver
For some SoCs, the CPU frequency subset and voltage value of each OPP
varies based on the silicon variant in use. The sun50i-cpufreq-nvmem
driver reads the efuse value from the SoC to provide the OPP framework
with required information.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-07-22 11:10:51 +05:30
Rafael J. Wysocki 586a07dca8 Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
  cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
  cpufreq: Don't skip frequency validation for has_target() drivers
  cpufreq: Use has_target() instead of !setpolicy
  cpufreq: Remove redundant !setpolicy check
  cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stub
  cpufreq: s5pv210: Don't flood kernel log after cpufreq change
  cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registered
  cpufreq: add driver for Raspberry Pi
  cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
  cpufreq: imx-cpufreq-dt: Remove global platform match list
  cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
  cpufreq: brcmstb-avs-cpufreq: Fix initial command check
  cpufreq: armada-37xx: Remove set but not used variable 'freq'
  cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts
  dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage
  cpufreq: Add imx-cpufreq-dt driver
2019-07-08 11:00:02 +02:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Leonard Crestez e6abacabb5 cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
This driver can handle speed grading bits on imx7d just like on imx8mq
and imx8mm.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-06 08:37:41 +05:30
Leonard Crestez 4d28ba1d62 cpufreq: Add imx-cpufreq-dt driver
Right now in upstream imx8m cpufreq support just lists a common subset
of OPPs because the higher ones should only be attempted after checking
speed grading in fuses.

Add a small driver which checks speed grading from nvmem cells before
registering cpufreq-dt.

This driver allows unlocking all frequencies for imx8mm and imx8mq and
could be applied to other chips like imx7d

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-05-20 12:47:48 +05:30
Joseph Lo 43c36002b8 cpufreq: dt-platdev: add Tegra210 to blacklist
Tegra210 uses "tegra124-cpufreq" platform driver to register device data
for "cpufreq-dt" driver. So add it in the blacklist for
"cpufreq-dt-platdev" driver to drop that.

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-02-06 14:31:19 +01:00
Dmitry Torokhov 9d21d33cab cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster
RK3899 has one cluster with 4 small cores, and another one with 2 big
cores, with cores in different clusters having different OPPs and thus
needing separate set of tunables. Let's enable this via
"have_governor_per_policy" platform data.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 08:55:44 +02:00
Biju Das d1e1303173 cpufreq: dt: Add support for r8a7744
Add the compatible strings for supporting the generic cpufreq driver on
the Renesas RZ/G1N (R8A7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-17 13:42:24 +02:00
Ilia Lin 46e2856b8e cpufreq: Add Kryo CPU scaling driver
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
the CPU frequency subset and voltage value of each OPP varies
based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-30 12:53:11 +02:00
Simon Horman 144ec880ed Revert "cpufreq: rcar: Add support for R8A7795 SoC"
This reverts commit 034def597b.

This is no longer needed since the following commit and to the best
of my knowledge is not relied on by any upstream DTS:

edeec420de (cpufreq: dt-platdev: Automatically create cpufreq
device with OPP v2)

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 10:24:00 +02:00
Simon Horman c76ff00baa Revert "cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver"
This reverts commit bea2ebca6b.

This is no longer needed since the following commit and to the best
of my knowledge is not relied on by any upstream DTS:

edeec420de (cpufreq: dt-platdev: Automatically create cpufreq
device with OPP v2)

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 10:24:00 +02:00
Andrew-sh Cheng 6066998cbd cpufreq: mediatek: add mediatek related projects into blacklist
mediatek projects will use mediate-cpufreq.c as cpufreq driver,
instead of using cpufreq_dt.c
Add mediatek related projects into cpufreq-dt blacklist

Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:43:44 +01:00
Marek Szyprowski 11f2c0d77c cpufreq: dt: Remove support for Exynos4212 SoCs
Support for Exynos4212 SoCs has been removed by commit bca9085e0a
"ARM: dts: exynos: remove Exynos4212 support (dead code)", so there
is no need to keep remaining dead code related to this SoC version.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 01:58:00 +02:00
Masahiro Yamada 3eba6e1211 cpufreq: dt-platdev: drop socionext,uniphier-ld6b from whitelist
As you see arch/arm/boot/dts/uniphier-ld6b.dtsi, it includes
uniphier-pxs2.dtsi, which uses "operating-points-v2" property
and whose cpufreq device is automatically created.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03 02:48:51 +02:00
Suniel Mahesh d477bf3af1 cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device
with same name "cpufreq-dt" using platform_device_register_*() routines.
This is leading to build warnings appended below.

Providing hardware information to OPP framework along with the platform-
device creation should be done by ti-cpufreq driver before cpufreq-dt
driver comes into place.

This patch add's TI am33xx, am43 and dra7 platforms (which use opp-v2
property) to the blacklist of devices in cpufreq-dt-platform driver to
avoid creating platform-device twice and remove build warnings.

[    2.370167] ------------[ cut here ]------------
[    2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78
[    2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt'
[    2.391219] Modules linked in:
[    2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1
[    2.402006] Hardware name: Generic AM33XX (Flattened Device Tree)
[    2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
[    2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
[    2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
[    2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
[    2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78)
[    2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98)
[    2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4)
[    2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
[    2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
[    2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
[    2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
[    2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
[    2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[    2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
[    2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
[    2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
[    2.545981] ---[ end trace 2fc00e213c13ab20 ]---
[    2.551051] ------------[ cut here ]------------
[    2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4
[    2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register
things with the same name in the same directory.
[    2.577977] Modules linked in:
[    2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.13.0-next-20170912 #1
[    2.590013] Hardware name: Generic AM33XX (Flattened Device Tree)
[    2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
[    2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
[    2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
[    2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
[    2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4)
[    2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
[    2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
[    2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
[    2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
[    2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
[    2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[    2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
[    2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
[    2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
[    2.716217] ---[ end trace 2fc00e213c13ab21 ]---

Fixes: edeec420de (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2)
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-26 01:10:08 +02:00
Viresh Kumar ff76898c0a cpufreq: dt-platdev: Add some missing platforms to the blacklist
Commit edeec420de (cpufreq: dt-platdev: Automatically create cpufreq
device with OPP v2) missed adding few platforms to the blacklist which
create the cpufreq-dt device from their own drivers, after some
dependencies are sorted out.

And for those platforms, both the platform specific driver and the
cpufreq-dt-platdev driver try to create the cpufreq-dt device now.

Fix that by including those platforms in the blacklist. This doesn't include
the TI platforms, for which there is a separate patch.

Fixes: edeec420de (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-19 23:05:28 +02:00
Viresh Kumar d79d148b64 cpufreq: dt-platdev: Drop few entries from whitelist
Drop few ARM (32 and 64 bit) platforms from the whitelist which always
use "operating-points-v2" property from their DT. They should continue
to work after this patch.

Tested on Hikey platform (only the "hisilicon,hi6220" entry).

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25 01:41:03 +02:00