Clean up the GPU command submission path to prepare for the next change.
This makes the next change easier to read and understand.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Use the previous GPU pipe state when deciding which GPU caches should
be flushed prior to switching the current pipe. This avoids infering
what the previously selected pipe was, and potentially flushing the
wrong caches.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Flush the GPU caches to ensure that any dirty data is pushed out before
stopping the front end.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add tracking of the current execution state (iow, active GPU pipe).
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Extract out the arming of a semaphore from the pipe select code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Extract out the replacement of the WAIT command with some other command.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Provide a helper etnaviv_buffer_reserve() to ensure that we can fit a
set of commands into the ring buffer without wrapping by moving code
out of etnaviv_buffer_queue().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
If the end of the system DMA window is farther away from the start of
physical RAM than the size of the GPU linear window, move the linear
window so that it ends at the same address than the system DMA window.
This allows to map command buffer from CMA, which is likely to reside
at the end of the system DMA window, while also overlapping as much
RAM as possible, in order to optimize regular buffer mappings through
the linear window.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The retire worker is kicked for each fence, either the normal way
by signaling the fence from the event completion interrupt or by
the recover worker if the GPU got stuck. Moving the RPM put into
the retire worker allows us to have it in a single place for
both cases.
This also shaves off quite a bit of the CPU time spent in hardirq
context, as arming the autosuspend timer when the RPM refcount
drops to 0 is a relatively costly operation.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
this do not mean driver error.
Change-Id: If2080eb4b79fc6389280b7c75cb7998d77090739
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a port of the patch "drm/amdgpu: Fix error handling in amdgpu_flip_work_func."
to fix the following problem for radeon as well which was
reported against amdgpu:
The patch e1d09dc0ccc6: "drm/amdgpu: Don't hang in
amdgpu_flip_work_func on disabled crtc." from Feb 19, 2016, leads to
the following static checker warning, as reported by Dan Carpenter in
https://lists.freedesktop.org/archives/dri-devel/2016-February/101987.html
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:127 amdgpu_flip_work_func() warn: should this be 'repcnt == -1'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'spin_lock:&crtc->dev->event_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'irqsave:flags'
This patch fixes both reported problems:
Change post-decrement of repcnt to pre-decrement, so
it can't underflow anymore, but still performs up to
three repetitions - three is the maximum one could
expect in practice.
Move the spin_unlock_irqrestore to where it actually
belongs.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch e1d09dc0ccc6: "drm/amdgpu: Don't hang in
amdgpu_flip_work_func on disabled crtc." from Feb 19, 2016, leads to
the following static checker warning, as reported by Dan Carpenter in
https://lists.freedesktop.org/archives/dri-devel/2016-February/101987.html
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:127 amdgpu_flip_work_func() warn: should this be 'repcnt == -1'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'spin_lock:&crtc->dev->event_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'irqsave:flags'
This patch fixes both reported problems:
Change post-decrement of repcnt to pre-decrement, so
it can't underflow anymore, but still performs up to
three repetitions - three is the maximum one could
expect in practice.
Move the spin_unlock_irqrestore to where it actually
belongs.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* HDMI interlace output support
* DMAbuf import support
* Big refactoring leading to removal of legacy code
* Various non-critical fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW2Y2tAAoJEPo9qoy8lh71MPoP/ikqFMmkmtXgn3ND/IRXfkbz
UUDgdOf7TyzMgTVJEKv8MMz/Da2P9AxTtv4unImZoy9OswfYuNETOViMw3Yj26aM
SNKWxHCA3yDUHndvwLUC8tMhpDXAXC1AdrIbuvj/H/5+Hox89Xo7L3CVMtdE68vN
9mlpxUJDqudMiUCv15Pi7YfLYJmzWLHGx7g+a6f6+KCPbtSWF7777MsSlxwPr1uP
M44cjseq8debLn8wWHl4Vzm40Wr4t0vzEo8oRIdBTs15YMQnPGanuIxvW/byPaCN
dXnEo98cD0wjd6lutMwEW0LQBCueQlsLgFRPHuUdhT0Z1NsiV7V892MH+QmePbzK
+MeV0TA3+34fj9ngSc8dqx7re26z8YNAkGrEZHYQTepjrzk4baS9GVZL9c4c5oV/
PSzoeC8ipPNMtbLJtgqIijvlO9Ir61J4twaGqhmJXiktsX+KZa0RuJ/RubT1ABmJ
Fkv9Jo4GK6ZxyH3xI6kJFxbf835/vaPRxCdd40Tp2H79w+1bxy37ieqhybLcQjqn
hR0Apn/VP0qREdw5naP1el+79R56vNogwsH7m/h3hM2DCMiwB7QuOTtoWw7eSDOW
ruOvLoNryYgQgMTK5baaTfeDo8lmYzjJch71W0zhlBa6qBXKl1dsVKWK7yKtbiXx
MabEhh52njL4pYF32wjW
=+fwk
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.6
* HDMI interlace output support
* DMAbuf import support
* Big refactoring leading to removal of legacy code
* Various non-critical fixes
* tag 'omapdrm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (76 commits)
drm/omap: no need to select OMAP2_DSS
drm/omap: gem: Fix omap_gem_new() error path
drm/omap: remove -Werror from Makefile
drm/omap: remove dispc_ovl_check()
drm/omap: remove dss compat code
drm/omap: remove last uses of omap_overlay_manager
drm/omap: DSI: remove uses of omap_overlay_manager
drm/omap: VENC: remove uses of omap_overlay_manager
drm/omap: SDI: remove uses of omap_overlay_manager
drm/omap: HDMI4: remove uses of omap_overlay_manager
drm/omap: HDMI5: remove uses of omap_overlay_manager
drm/omap: DPI: remove uses of omap_overlay_manager
drm/omap: remove extra manager checks on disconnect
drm/omap: remove extra check in dpi and sdi
drm/omap: convert dss_mgr_unregister_framedone_handler to accept omap_channel
drm/omap: convert dss_mgr_register_framedone_handler to accept omap_channel
drm/omap: convert dss_mgr_start_update to accept omap_channel
drm/omap: convert dss_mgr_disable to accept omap_channel
drm/omap: convert dss_mgr_enable to accept omap_channel
drm/omap: convert dss_mgr_set_lcd_config to accept omap_channel
...
Two small fixes that restore PRIME support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=u/CF
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.5-rc7' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.5-rc7
Two small fixes that restore PRIME support.
* tag 'drm/tegra/for-4.5-rc7' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: Set DMA ops on device creation
gpu: host1x: Set DMA mask
Let's use __KERNEL_DIV_ROUND_UP, which is defined in uapi/linux/kernel.h.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the addition of crtc_state->connector_mask other connectors from
different crtc's aren't needed any more to determine if a crtc has
connectors, so only call add_affected_connectors on the target crtc.
This allows a cleanup to first remove all current connectors, then
add all set->connectors to the target crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456303053-28806-2-git-send-email-maarten.lankhorst@linux.intel.com
Currently host1x-instanciated devices have their dma_ops left to NULL,
which makes any DMA operation (like buffer import) on ARM64 fallback
to the dummy_dma_ops and fail with an error.
This patch calls of_dma_configure() with the host1x node when creating
such a device, so the proper DMA operations are set.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The default DMA mask covers a 32 bits address range, but host1x devices
can address a larger range on TK1 and TX1. Set the DMA mask to the range
addressable when we use the IOMMU to prevent the use of bounce buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Small conflict as I had the balance in my tree already for testing.
* tag 'drm-intel-fixes-2016-03-03' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
drm/i915/skl: Fix power domain suspend sequence
Big ticket items are hdmi support for 8996 (aka snapdragon 820), and
adreno 430 support. Also one more small uapi addition to support
timestamp queries.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (29 commits)
drm/msm: rename hdmi symbols
drm/msm/adreno: remove duplicate adreno_hw_init() call
drm/msm: add timestamp param
drm/msm: fix small typo
drm/msm: grab struct_mutex after allocating submit
drm/msm: reject submit ioctl if no gpu
drm/msm/adreno: print details in case of a protect fault interrupt
drm/msm/adreno: get CP_RPTR from register instead of shadow memory
drm/msm/adreno: add adreno430 power control
drm/msm/adreno: support for adreno 430.
drm/msm: update generated headers
drm/msm/dsi: fix definition of msm_dsi_pll_28nm_8960_init()
drm/msm/dsi: Parse DSI lanes via DT
drm/msm/dsi: Drop VDD regulator for MSM8916
drm/msm/dsi: Remove incorrect warning on host attach
drm/msm: Free fb helper resources in msm_unload
drm/msm/mdp: Detach iommu in mdp4_destroy
drm/msm: make iommu port names const'ier
drm/msm/mdp: Use atomic helper to set crtc property
dt-bindings: msm/hdmi: Add HDMI PHY bindings
...
Global symbols in the kernel should be prefixed by the name
of the subsystem and/or driver to avoid conflicts when all
code is built-in.
In this case, function names like 'hdmi_register' or 'hdmi_set_mode'
are way too generic for an MSM specific DRM driver, so I'm renaming
them all to msm_hdmi_* here.
I also rename a lot of the 'static' symbols along with the global
names for consistency, even though those are relatively harmless;
they might only be slightly confusing when they show up in
backtraces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Not sure where it came from, but seem unintentional. And also not
needed on a420, so let's just drop it.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We need this for GL_TIMESTAMP queries.
Note: currently only supported on a4xx.. a3xx doesn't have this
always-on counter. I think we could emulate it with the one CP
counter that is available, but for now it is of limited usefulness
on a3xx (since we can't seem to do time-elapsed queries in any sane
way with the existing firmware on a3xx, and if you are trying to do
profiling on a tiler you want time-elapsed). We can add that later
if it becomes useful.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Existing userspace wouldn't get this far, since getparam ioctl would
have failed and it would have bailed out creating a screen/context.
But all the same, we shouldn't let evil or confused userspace cause a
null ptr deref.
Signed-off-by: Rob Clark <robdclark@gmail.com>
As described in the downstream/kgsl driver:
Sometimes the RPTR shadow memory is unreliable causing timeouts
in adreno_idle(). Read it directly from the register instead.
Signed-off-by: Craig Stout <cstout@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This fixes the following build failure:
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.o: In function `msm_dsi_pll_28nm_8960_init':
dsi_pll_28nm.c:(.text+0x1198): multiple definition of `msm_dsi_pll_28nm_8960_init'
drivers/gpu/drm/msm/dsi/pll/dsi_pll.o:dsi_pll.c:(.text+0x0): first defined here
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The DSI driver is currently unaware of how the DSI physical data lanes
are mapped to the logical lanes provided by the DSI controller.
Create a DT binding "qcom,data-lane-map" that provides this information
on a given platform.
The MSM DSI controller is restricted in terms of what all mappings
it can support. The lane polarity is fixed for all the lanes, the clock
lanes are fixed, and the data lanes can be swapped among each other only
for a few combinations. Apply these restrictions when we parse the DT
data.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
omapdss driver now depends on omapdrm, so we no longer should select
OMAP2_DSS from omapdrm's Kconfig.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When an error occurs in omap_gem_new() the function calls
omap_gem_free_object() to clean up. However, that function expects to be
called on a fully initialized GEM object and thus crashes.
Replace it by manual cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We have removed all the uses of compat code from omapdrm and the
non-compat parts of omapdss, so now we can remove all the compat code
itself.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We have now removed all uses of 'struct omap_overlay_manager', so we can
now remove the last places where it is set.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes DSI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes VENC driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes SDI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes HDMI4 driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes HDMI5 driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes DPI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSS output drivers check 'dssdev->manager' in disconnect()
functions. This check is not needed as the manager must always be set if
the output device was connected. Remove the check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Both dpi and sdi check for 'mgr != NULL' in check_timings. This check is
not necessary, as mgr must always be set before check_timings. Remove
the check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_unregister_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_register_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_start_update() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_enable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_lcd_config() to accept 'enum omap_channel' instead
of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_timings() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disconnect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_connect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use 'out->dispc_channel_connected' to check if the device is connected
to an overlay manager or not, instead of using 'out->manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We want to remove the 'struct omap_overlay_manager' from
omap_dss_device. At the moment that field is used, among some other
uses, to see if the omap_dss_device is connected to an overlay manager.
To make it possible to remove the 'struct omap_overlay_manager' field,
this patch adds 'bool dispc_channel_connected' field to track the
connected-or-not status.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the use of 'struct omap_overlay_manager' from omapdrm.
This patch changes the function pointers in 'dss_mgr_ops' to get 'enum
omap_channel' parameter instead of 'struct omap_overlay_manager'.
The change is very straightforward, as we still use 'struct
omap_overlay_manager' inside the function implementations where needed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In order to remove uses of 'struct omap_overlay_manager' we need to get
rid of using omapdss_find_mgr_from_display() when initializing omapdrm.
Instead of using omapdss_find_mgr_from_display() and mgr->id to find the
dispc channel used for the given display, we can instead use
omapdss_find_output_from_display(), and get the output->dispc_channel
from there.
We can also remove omapdss_find_mgr_from_display() as it's no longer
used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In order to remove uses of 'struct omap_overlay_manager' from omapdrm,
this patch removes the crtc->mgr field.
To accomplish that, a new static array is added along the current
'omap_crtcs' static array, which is used to store the output device
connected to a crtc.
Optimally we'd use the struct omap_crtc to store this information, but
at the time when omap_crtc_dss_connect() is called, we don't yet have
the omap_crtc instances. This might possibly be fixed later, but for now
the static array does the job.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the use of the 'struct omap_overlay_manager' from
omapdrm, and one part of that is removing the use of
mgr->supported_outputs field.
This patch adds dispc_mgr_get_supported_outputs() function which can be
used instead of mgr->supported_outputs. omap_crtc.c is changed to use
the new function.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch continues the work to create private versions of the
omapdss.h header for omapdrm and omapfb. This one moves the dss_mgr_*
function declarations.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch continues the work to create private versions of the
omapdss.h header for omapdrm and omapfb. This one moves 'struct dss_mgr_ops'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm and omapfb still share the same include/video/omapdss.h. We need
to change that so that we can proceed with omapdrm work.
However, it's not trivial to make separate omapfb and omapdrm versions
of omapdss.h, as that file is also included in other places like arch
code, audio code and omap_vout code. So we'll do it piece by piece.
This patch makes private versions of all the dispc function declarations
that are in omapdss.h. For omapdrm we create a new file,
drivers/gpu/drm/omapdrm/dss/omapdss.h, which will contain headers meant
to be visible outside omapdss.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the connector, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the connector, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the encoder, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
core.c is the only caller of dss_disable_all_devices(). We can thus move
the function from display.c to core.c and make it static.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
For legacy reasons omapdss handles system suspend/resume via PM notifier
callback, where the driver disables/resumes all the outputs.
This doesn't work well with omapdrm. What happens on suspend is that the
omapdss disables the displays while omapdrm is still happily continuing
its work, possibly waiting for an vsync irq, which will never come if
the display output is disabled, leading to timeouts and errors sent to
userspace.
This patch moves the suspend/resume handling to omapdrm, and the
suspend/resume is now done safely inside modeset lock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm is missing a check on the validity of the rotation property.
This leads to omapdrm possibly trying to use rotation on non-rotateable
framebuffer, which causes the overlay setup to fail.
This patch adds the necessary check to omap_plane_atomic_check().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Before universal planes we had to have plane specific properties for the
crtc too, as on the hardware level a crtc uses a plane. In other words,
e.g. 'zorder' property was added to both planes and crtcs, and
omap_crtc.c would delegate the property set/get to the primary plane.
However, the delegation was a bit too generic, delegating all property
set/get calls to planes. Thus it's possible to set, say, FB_ID, on a
crtc, which gets redirected to the primary plane.
This is not standard, and shouldn't be allowed. To keep backward
compatibility, we still need to redirect the properties we supported
earlier for crtcs, namely 'zorder' and 'rotation'.
This patch redirects only the allowed properties from crtcs to planes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subsequent threads returning EBUSY from vm_insert_pfn() was not
handled correctly. As a result concurrent access from new threads
to mmapped data caused SIGBUS.
See e79e0fe380 ("drm/i915: EBUSY status
handling added to i915_gem_fault()").
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The DSS hardware uses the same ROW_INC value for both Y and UV planes
for NV12 format. This means that the pitches of the Y and UV planes have
to match. omapdrm doesn't check this at the moment, and this can lead
into a broken NV12 fb on the screen.
This patch adds the check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
DISPC requires the x resolution to be divisible by 8 when stall mode is
not used.
Add a check to the DPI driver to verify this.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Now that interlace support has been added, we can remove the check that
prevents interlace.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the missing bits for interlace:
* Set VBLANK_OSC if the videomode's vblank is fractional
* Halve the vertical timings for interlace
* Double the horizontal timings for double-pixel mode
* Set FC_PRCONF properly for double-pixel mode
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The HDMI driver copies the timing values one by one. Instead we can just
copy the whole struct.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
For some reason the HDMI FC's HSW value is programmed to hsw-1. There's
no indication in the documentation that this would be correct, and no
other blanking value needs -1 either.
So remove the -1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Interlace field order is different between VENC and HDMI. The driver
currently sets the field order for VENC.
This patch adds the code to set the field order for HDMI.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The HDMI WP timings are not programmed correctly for interlace.
We need to halve the vertical timings when interlace is used, and double
the horizontal timings when pixel doubling is used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
On OMAP4 and OMAP5 ES1.0 the HDMI_WP_VIDEO_TIMING_H:HSW field is
set directly to the HSW value. On later SoCs the field needs to be
programmed with the value of HSW-1.
Currently the driver always programs the field with the HSW value. Most
videomodes seem to work fine with that, but at least low resolution
interlaced modes don't work at all.
This patch fixes the HSW for OMAP5 ES2.0+ SoCs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to HDMI to double the pixel clock when
double-pixel mode is used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to omapdrm to output double-pixel mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to DISPC to output double-pixel mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_crtc_wait_pending() waits until the config changes have been taken
into use, usually at next vblank. The wait-timeout used is 50ms, which
usually is enough, but in some rare cases not.
As time wait-timeout is just a safety measure for cases where something
is broken, we can just as well increase the timeout considerably.
This patch makes the timeout 250ms.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We no longer have the omapdrm plugin system for SGX, and we can thus
remove the support for external memory and sync objects from omap_gem.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
OMAP GEM objects backed by dma_buf reuse the current OMAP GEM object
support as much as possible. If the imported buffer is physically
contiguous its physical address will be used directly, reusing the
OMAP_BO_MEM_DMA_API code paths. Otherwise it will be mapped through the
TILER using a pages list created from the scatterlist instead of the
shmem backing storage.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Split the individual steps of GEM object allocation and initialization
clearly. This improves readability and prepares for dma_buf import
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver assumes that only objects backed by shmem need to be mapped
through DMM. While this is true with the current code, the assumption
won't hold with dma_buf import support.
Condition the mapping based on whether the buffer has been allocated
using the DMA mapping API instead and clean up the flags to avoid having
to check both flags and GEM object filp field to decide how to process
buffers. Flags are not the authoritative source of information regarding
where the buffer memory comes from, and are renamed to make that
clearer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If the panel's enable fails, omap_encoder silently ignores the failure.
omapdrm should really handle the failure, but unfortunately the whole
encoder enable codepath is expected to always succeed.
So for now, catch the enable failure and print an error.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_gem_dma_sync() calls dma_map_page() but does not check the possible
error with dma_mapping_error(). If DMA-API debugging is enabled, the
debug layer will give a warning if dma_mapping_error() has not been
used.
This patch adds proper error handling to omap_gem_dma_sync().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_gem_attach_pages() calls dma_map_page() but does not check the
possible error with dma_mapping_error(). If DMA-API debugging is
enabled, the debug layer will give a warning if dma_mapping_error() has
not been used.
This patch adds proper error handling to omap_gem_attach_pages().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
tpd12s015 HW has LS_OE, CT_CP_HPD and HPD gpios. Out of these gpios,
driver only handled LS_OE as optional. The CT_CP_HPD gpio should also
be treated as optional gpio as it is just a power saving feature. Some
boards hardwire this gpio to be always enable. In this patch, all access
to CT_CP_HPD gpio is made optional.
Signed-off-by: Manisha Agrawal <manisha.agrawal@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
All devices using tpd12s015 driver are doing DT boot. No need of further
supporting the platform data. This patch removes support for platform
data.
Signed-off-by: Manisha Agrawal <manisha.agrawal@ti.com>
[tomi.valkeinen@ti.com: minor adjustments]
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This patch adds wrapper functions for readl() and writel(), dmm_read()
and dmm_write(), so that we can implement workaround for DRA7 errata
i878.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The current driver uses non-blocking DMM fill when releasing memory.
This gives us a small performance increase as we don't have to wait for
the fill operation to finish.
However, the driver does not have any error handling for non-blocking
fill. In case of an error, the fill operation may silently fail, leading
to leaking DMM engines, which may eventually lead to deadlock if we run
out of DMM engines.
This patch makes the DMM driver always use blocking fills, so that we
can catch the errors. A more complex option would be to allow
non-blocking fills, and implement proper error handling, but that is
left for the future.
This patch is a HACK, as the proper fix is to either decide to always
use sync fills and remove all the async related code, or fix the async
code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We occasionally see DISPC sync-lost errors when enabling and disabling
HDMI. Sometimes we get only a few, which get handled (ignored) by the
driver, but sometimes there's a flood of the errors which doesn't seem
to stop.
The HW team has root caused this to the order in which HDMI and DISPC
are enabled/disabled. Currently we enable HDMI first, and then DISPC,
and vice versa when disabling. HW team's suggestion is to do it the
other way around.
This patch changes the order, but this has two side effects as the pixel
clock is produced by HDMI, and the clock is not running when we
enable/disable DISPC:
* When enabling DISPC first, we don't get vertical sync events
* When disabling DISPC last, we don't get FRAMEDONE event
At the moment we use both of those to verify that DISPC has been
enabled/disabled properly. Thus this patch also needs to change the
omapdrm and omapdss which handle the DISPC side.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The STi drm driver correctly warns about invalid format strings
when built with 64-bit dma_addr_t:
sti_hqvdp.c: In function 'sti_hqvdp_vtg_cb':
sti_hqvdp.c:605:119: warning: format '%x' expects argument of type
'unsigned int', but argument 5 has type 'dma_addr_t {aka long long
unsigned int}' [-Wformat=]
sti_hqvdp.c: In function 'sti_hqvdp_atomic_update':
sti_hqvdp.c:931:118: warning: format '%x' expects argument of type
'unsigned int', but argument 5 has type 'dma_addr_t {aka long long
unsigned int}' [-Wformat=]
This could be changed to using the %pad format string, but that
does not work when printing an rvalue, so instead I'm changing
the type in the sti_hqvdp structure to u32, which is what gets
written into the registers anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Thanks to "drm: prime: Honour O_RDWR during prime-handle-to-fd"
commit we don't need to hack flags anymore.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix some copy paste typos.
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes for radeon and amdgpu:
- Fix GPUVM flushing on CI and VI
- Misc DPM and Powerplay fixes
- VCE DPM fixes for CZ/ST
- DP hotplug fix
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: return from atombios_dp_get_dpcd only when error
drm/amdgpu/cz: remove commented out call to enable vce pg
drm/amdgpu/powerplay/cz: enable/disable vce dpm independent of vce pg
drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled
drm/amdgpu/gfx8: specify which engine to wait before vm flush
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
drm/amd/powerplay: send event to notify powerplay all modules are initialized.
drm/amd/powerplay: export AMD_PP_EVENT_COMPLETE_INIT task to amdgpu.
drm/radeon/pm: update current crtc info after setting the powerstate
drm/amdgpu/pm: update current crtc info after setting the powerstate
VDD regulator input was specified for MSM8916. It turns our that this
regulator is used for the display panels used on MSM8916 platforms, but
not the DSI controller itself. Drop this regulator from the list.
Reported-by: Vinay Simha <vinaysimha@inforcecomputing.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
With the implementation of of_graph parsing, it isn't any longer
necessary for msm_host->device node to be same as dsi->dev.of_node. This
only holds true when the connected device is also a child of the dsi_host.
In the case of external bridge chips belonging to a different control
bus, these are guaranteed to be different.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We have a msm_fbev_free function to uninit fb_helper stuff, but we aren't
using it. Call it in msm_unload.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
attach_dev gets called in mdp4_kms_init, but there is no corresponding
detach_dev called in the error path or in the kms driver unload path.
Detach and destroy mmu in mdp4_destroy.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Assign drm_atomic_helper_crtc_set_property helper to MDP4 and MDP5
crtcs' set_property ops. This replaces the custom funcs that
returned an error even for standard crtc properties.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Instead of forcing bridges to implement empty callbacks make them all
optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT
LCD panels in the simple-panel driver.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LG lp120up1 TFT LCD panel with eDP interface is a 12.0" 1920x1280
panel, which can be supported by the simple panel driver.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Set hsync/vsync to active low for g121x1_l03 panel to match the
recommended setting in the datasheet.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
MIPI DSI devices are inherently aware of their host because they share a
parent-child hierarchy in the device tree.
Non-DSI drivers that create DSI device don't have this data. In order to
get this information, they require to a phandle to the DSI host in the
device tree.
Maintain a list of all the DSI hosts that are currently registered. This
list will be used to find the struct mipi_dsi_host corresponding to the
device tree node passed to of_find_mipi_dsi_host_by_node().
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A driver calling mipi_dsi_device_register_full() might want to remove
the device once it's done. It might also require it in an error handling
path in case something went wrong.
Create mipi_dsi_device_unregister() for this purpose and use it within
mipi_dsi_remove_device_fn() as it does the same thing.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In amdgpu_connector_hotplug(), we need to start DP link
training only after we have received DPCD. The function
amdgpu_atombios_dp_get_dpcd() returns non-zero value only
when an error condition is met, otherwise returns zero.
So in case the function encounters an error, we need to
skip rest of the code and return from amdgpu_connector_hotplug()
immediately. Only when we are successfull in reading DPCD
pin, we should carry on with turning-on the monitor.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This code path is not currently enabled now that we properly
respect the vce pg flags, so uncomment the actual pg calls
so the code is as it should be we are eventually able to
enable vce pg.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we don't disable it when vce is not in use, we use extra power
if vce pg is disabled.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I missed this when cleaning up the vce pg handling.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Select between me and pfp properly.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We never ported that back to CIK, so we could run into VM faults here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
with this event, powerplay can adjust current power state if needed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to init the dynamic states without a display. To be
used in the next commit.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Add a device name field in struct mipi_dsi_device. This name is not the
same as the device name (which is of the format "hostname.reg"). When
the device is created via DT, this name is set to the modalias string.
In the non-DT case, the driver creating the DSI device provides the
name by populating a field in struct mipi_dsi_device_info.
Matching for DT case would be as it was before. For the non-DT case, we
compare the device and driver names. Other buses (like I2C/SPI) perform
a non-DT match by comparing the device name and entries in the driver's
id_table. Such a mechanism isn't used for the DSI bus.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use mipi_dsi_device_register_full() for device creation. This takes in
a struct mipi_dsi_device_info as a template to populate the DSI device
information.
The reason to introduce this is to have a way to create DSI devices not
available via DT. Drivers that want to create a DSI device can populate
a struct mipi_dsi_device_info and call this function. For DSI devices
available via DT, of_mipi_dsi_device_add() is used as before, but this
now calls mipi_dsi_device_register_full() internally.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
of_mipi_dsi_device_add() is used only when CONFIG_OF is enabled. It
currently works if OF support is disabled, but this will change when we
add more functionality to it.
Define the original function if CONFIG_OF is enabled and a dummy
function otherwise.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
commit 0973128002
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Feb 17 14:17:42 2016 +0200
drm/i915: Add helper to get a display power ref if it was already enabled
left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as
intel_runtime_pm_get_if_in_use() would return true without incrementing
the local bookkeeping required for the assertions.
Fixes: 0973128002 ("drm/i915: Add helper to get a display power ref if it was already enabled")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456434628-22574-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 135dc79efb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During system suspend we need to first disable power wells then
unitialize the display core. In case power well support is disabled we
did this in the wrong order, so fix this up.
Fixes: d314cd43 ("drm/i915: fix handling of the disable_power_well module option")
CC: stable@vger.kernel.org
CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 2622d79bd9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Add and make use of drm_of_active_endpoint helpers
- Silence a noisy dev_info into a dev_dbg
- Stop touching primary fb on pageflips
- Track flip state explicitly
- Keep GEM buffer objects referenced while scanout is active
- Implement fence sync by deferring flips to a workqueue for
dma-bufs with pending fences
- Actually disable vblank IRQs while they are not needed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ufbY
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-20160301' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm vblank IRQ control, fence support, and of endpoint helpers
- Add and make use of drm_of_active_endpoint helpers
- Silence a noisy dev_info into a dev_dbg
- Stop touching primary fb on pageflips
- Track flip state explicitly
- Keep GEM buffer objects referenced while scanout is active
- Implement fence sync by deferring flips to a workqueue for
dma-bufs with pending fences
- Actually disable vblank IRQs while they are not needed
* tag 'imx-drm-next-20160301' of git://git.pengutronix.de/git/pza/linux:
drm/imx: only enable vblank IRQs when needed
drm/imx: implement fence sync
drm/imx: keep GEM object referenced as long as scanout is active
drm/imx: track flip state explicitly
drm/imx: don't touch primary fb on pageflip
drm/imx: ipuv3 plane: Replace dev_info with dev_dbg if a plane's CRTC changes
gpu: ipu-v3: ipu-dc: Simplify display controller microcode setup
drm/rockchip: remove rockchip_drm_encoder_get_mux_id
drm/imx: remove imx_drm_encoder_get_mux_id
drm: add drm_of_encoder_active_endpoint helpers
During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Core provides generic helper to create DSI packet, use it instead of
custom code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch changes device pointer provided to all calls to DMA-mapping
subsystem from the virtual exynos-drm 'device' to the real device pointer
of one of the CRTC devices (decon, fimd or mixer). This way no more hacks
will be needed to configure proper DMA-mapping address space on the common
virtual exynos-drm device. This change also removes the need for some
hacks in IOMMU related code. It also finally solves the problem of Exynos
DRM driver not working on ARM64 architecture, which provides noop-based
DMA-mapping operations for virtual platform devices.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch refactors driver and device registration by moving all drivers
to the common array. This way additional flags can be added later for
new features. #ifdef-based code has been replaced by IS_ENABLED() macro
usage.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Polarization was never configured for DRM-FIMC device, so fimc_set_polarity
function did nothing. In fact DRM does not use camera interface so there
is no point in configuring it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct exynos_drm_panel_info is not used anymore, except exynos_dp,
which can integrate useful fields directly into its context.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds a exynos5420 driver data to support mic_bypass
option to bypass the mic from display out path.
The mic(Mobile image compressor) compresses RGB data from fimd
and send the compressed data to the mipi dsi.
The bypass option can be founded from system register and the bit
is 11. The option bit has been introduced since exynos5420. The
only difference between exynos5250 and exynos5420/exynos5422 is
existence of the bit. Until the MIC is defined and enabled from
device tree, the bypass mic will be default option.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch uses DIV_ROUND_CLOSEST instead of DIV_ROUND_UP
The DIV_ROUND_CLOSEST can be used to find the closest integer
value when we divide some integers.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Include directories are provided by core already, adding them in driver
is redundand and causes warnings in case of out-of-tree build.
v2:
- fixed include in exynos_drm_iommu.c
- typo in commit message
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Functions are preferred over macros as more type-safe.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch supports mipi dsi for exynos5422. The dsi register
offsets of the exynos5422 are similar with exynos5433. However,
the values of the registers are quite different from the
exynos5433. For example, the exynos5422 uses sw reset like
previous chips.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Decon requires that clocks should be disabled in reverse order. Otherwise
system hangs.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
dma_mmap_attrs() should be called with cpu address returned by
dma_alloc_attrs(). Existing code however passed pages array base as cpu
address. This worked only by a pure luck on ARM architecture. This patch
fixes this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
BIT_IRQS_ENABLED was never set because of incorrect test in
decon_vlank_enable() function, what resulted in lack of enabling vblank
support. This patch fixes this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Patch ebf3fd403b ("drm/exynos: add
pm_runtime to DECON 5433") removed some code from decon_enable()
function, but it left set_bit(BIT_SUSPENDED, &ctx->flags) call, which
was earlier called only in error path. This patch removes it, what
finally lets driver to go out of suspended state.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes issue introduced by commit
cf67cc9a29 ("drm/exynos: remove struct
exynos_drm_display"), which removed assigning of drm bridge to drm
encoder. Lack of it caused that no bridge callbacks were called on
encoder enable/disable actions.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no point exposing all internal functions to global kernel name
space, so make all internals functions static.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
MIC is SoC component and important part of kms pipeline on Exynos5433,
so convert it to use component framework like other KMS/CRTC drivers.
MIC driver is already listed on KMS component driver list in Exynos DRM
core, so without this conversion, initialization of Exynos DRM core
fails on Exynos 5433 SoC.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Drivers should use devm_clk* interface instead of of_clk* functions.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes compilation warnings (on 64bit architectures) and bugs
related to casting pointers through 32bit integers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Drivers should use %p for printing pointers instead of hardcoding them
as hexadecimal integers. This patch fixes compilation warnings on 64bit
architectures.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Because PLAT_SAMSUNG isn't include exynos SoCs for arm64, but
ARCH_EXYNOS can do it. And it also needs to add ARCH_S3C64XX instead of
PLAT_SAMSUNG.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The vblank IRQ is only needed to trigger page flip work, so we
might as well disable it when there is no work to do.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If the FB is backed by a GEM object with an dma-buf attached
we need to wait for any pending fences to signal before executing
the page flip.
The implementation is straight forward by deferring the flip to
a workqueue in that case.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The DRM core only references the currently queued/active framebuffer.
So there is a period of time where the flip is not completed, but
the GEM object backing the FB is already unreferenced and could be
destroyed if userspace closes its handle.
Make sure to keep a reference to the GEM object until the flip is
actually executed clean things up in a worker running behind the
flip execution.
Also move the page flip event into the context of this worker, so
it gets cleaned up automatically.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Start tracking the flip state explicitly, as opposed to inferring
it from the presence if a new FB. This is a preparatory step to
introduce an new immediate state, where we can wait for a fence to
signal.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The core already does the correct replacemet if the driver
page flip function returns without an error, so there is no
need to do it here.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch changes the dev_info() call to dev_dbg() in ipu_plane_update()
to print out the information that a plane's CRTC is changed, because this
kind of information is only useful for debugging.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This cleans up the display controller microcode setup in ipu_dc_init_sync
a little bit. The microcode template words for DI0 and DI1 are properly
separated to avoid a clash when DI1 is active in interlaced mode at the
same time as DI0 in non-interlaced mode.
A comment is added to explain the meaning of the sync counter.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
It is replaced by drm_of_encoder_active_endpoint_id.
Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Yakir Yang <ykk@rock-chips.com>
[for dw_hdmi-rockchip]
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
It is replaced by drm_of_encoder_active_port_id.
Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
- lots and lots of fbc work from Paulo
- max pixel clock checks from Mika Kahola
- prep work for nv12 offset handling from Ville
- piles of small fixes and refactorings all around
* tag 'drm-intel-next-2016-02-14' of git://anongit.freedesktop.org/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20160214
drm/i915: edp resume/On time optimization.
agp/intel-gtt: Only register fake agp driver for gen1
drm/i915: TV pixel clock check
drm/i915: CRT pixel clock check
drm/i915: SDVO pixel clock check
drm/i915: DisplayPort-MST pixel clock check
drm/i915: HDMI pixel clock check
drm/i915: DisplayPort pixel clock check
drm/i915: check that rpm ref is held when accessing ringbuf in stolen mem
drm/i915: fix error path in intel_setup_gmbus()
drm/i915: Stop depending upon CONFIG_AGP_INTEL
agp/intel-gtt: Don't leak the scratch page
drm/i915: Capture PCI revision and subsytem details in error state
drm/i915: fix context/engine cleanup order
drm/i915: Handle PipeC fused off on IVB/HSW/BDW
drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
drm/i915: Skip DDI PLL selection for DSI
drm/i915/skl: Explicitly check for eDP in skl_ddi_pll_select()
drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()
...
commit 0973128002
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Feb 17 14:17:42 2016 +0200
drm/i915: Add helper to get a display power ref if it was already enabled
left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as
intel_runtime_pm_get_if_in_use() would return true without incrementing
the local bookkeeping required for the assertions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Makes matching it to the flushes much easier.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The owner must be per ring as long as we don't
support sharing VMIDs per process. Also move the
assigned VMID and page directory address into the
IB structure.
v3: assign the VMID to all IBs, not just the first one.
v4: use correct pointer for owner
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the HDMI PHY/PLL found in MSM8996/APQ8096.
Unlike the previous PHYs supported in the driver, this doesn't need
the powerup/powerdown ops. The PLL prepare/unprepare clock ops
enable/disable the phy itself.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
- Create separate domains for 8960 PHY and PLL
- Create separate domains for 8x60 PHY
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove the old PHY ops managed by hdmi_platform_config and use them as ops
provided by the HDMI PHY driver.
Remove the old HDMI 8960 PLL code that used the top level HDMI TX mmio
base.
NOTE: With this commit, HDMI functionality will break until the HDMI
PHY/PLL register offsets in hdmi.xml.h aren't updated to be used as
separate domains.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Make HDMI core get its PHY by parsing the "phys" phandle. The core will use
this PHY reference to enable/disable PHY. The driver defers probe until PHY
isn't available.
The DT bindings used here is the same as the one used for PHYs using the
common PHY framework bindings.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a helper to initialize PLL in the PHY driver. HDMI PLLs are going to
have their own mmio base different from that of PHY.
For the clock code in hdmi_phy_8960.c, some changes were needed for it to
work with the updated register offsets. Create a copy of the updated clock
code in hdmi_pll_8960.c, instead of rewriting it in hdmi_phy_8960.c
itself. This removes the need to place CONFIG_COMMON_CLOCK checks all
around, makes the code more legible, and also removes some old checkpatch
warnings with the original code.
The older hdmi pll clock ops in hdmi_phy_8960.c will be removed later. The
driver will use these until the HDMI PHY/PLL register offsets aren't
considered as separate domains (i.e. their offsets start from 0).
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Create a PHY device that represents the TX PHY and PLL parts of the HDMI
block.
This makes management of PHY specific resources (regulators and clocks)
much easier, and makes the PHY and PLL usable independently. It also
simplifies the core HDMI driver, which currently assigns phy ops among
many other things.
The PHY driver implementation done here is very similar to the PHY driver
we already have for DSI.
Keep the old hdmi_phy_funcs ops for now. The driver will use these until
the HDMI PHY/PLL register offsets aren't considered as separate
domains (i.e. their offsets start from 0).
The driver doesn't use the common PHY framework for now. This is because
it's hard to map our ops with the ops provided by the framework. The
bindings used for this is the generic phy bindings. So, this can be
adapted to the PHY framework in the future, if possible.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Some platforms may not have a HPD gpio line to detect Hot Plug signal from
the connector. They need to rely only on reading REG_HDMI_HPD_INT_STATUS
for HPD.
Modify hdmi_connector_detect logic such that it checks for HPD only using
the status register if there is no HPD gpio.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Make gpio allocation and usage iterative by parsing the gpios on a given
platform from a list. This gives us flexibility over what all gpios exist
for a platform, whether they are input or output, and what value they
should be set to.
In particular, this will make HDMI on 8x96 platforms easier to integrate
with the driver, as it doesn't have a HPD gpio input to them. Also, it
cleans things up a bit.
We still use the legacy gpio api here, as we might need to backport this
driver to downstream kernels.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
amdgpu must load only after amdkfd's loading has been completed. If that
is not enforced, then amdgpu's call into amdkfd's functions will cause a
kernel BUG.
When amdgpu and amdkfd are built as kernel modules, that rule is enforced
by the kernel's modules loading mechanism. When amdgpu and amdkfd are
built inside the kernel image, that rule is enforced by ordering in the
drm Makefile (amdkfd before amdgpu).
Instead of using drm Makefile ordering, we can now use deferred loading
as amdkfd now returns -EPROBE_DEFER in kgd2kfd_init() when it is not yet
loaded.
This patch defers amdgpu loading by propagating -EPROBE_DEFER to the
kernel's drivers loading infrastructure. That will put amdgpu into the
pending drivers list (see description in dd.c). Once amdkfd is loaded,
a call to kgd2kfd_init() will return successfully and amdgpu will be able
to load.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
radeon must load only after amdkfd's loading has been completed. If that
is not enforced, then radeon's call into amdkfd's functions will cause a
kernel BUG.
When radeon and amdkfd are built as kernel modules, that rule is
enforced by the kernel's modules loading mechanism. When radeon and
amdkfd are built inside the kernel image, that rule is enforced by
ordering in the drm Makefile (amdkfd before radeon).
Instead of using drm Makefile ordering, we can now use deferred
loading as amdkfd now returns -EPROBE_DEFER in kgd2kfd_init() when it is
not yet loaded.
This patch defers radeon loading by propagating -EPROBE_DEFER to the
kernel's drivers loading infrastructure. That will put radeon into the
pending drivers list (see description in dd.c). Once amdkfd is loaded,
a call to kgd2kfd_init() will return successfully and radeon will be
able to load.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Current dependencies between amdkfd and radeon/amdgpu force the loading
of amdkfd _before_ radeon and/or amdgpu are loaded. When all these kernel
drivers are built as modules, this ordering is enforced by the kernel
built-in mechanism of loading dependent modules.
However, there is no such mechanism in case where all these drivers are
compiled inside the kernel image (not as modules). The current way to
enforce loading of amdkfd before radeon/amdgpu, is to put amdkfd before
radeon/amdgpu in the drm Makefile, but that method is way too fragile.
In addition, there is no kernel mechanism to check whether a kernel
driver that is built inside the kernel image, has already been loaded.
To solve this, this patch adds to kfd_module.c a new static variable,
amdkfd_init_completed, that is set to 1 only when amdkfd's
module initialization function has been completed (successfully).
kgd2kfd_init(), which is the initialization function of the
kgd-->kfd interface, and which is the first function in amdkfd called by
radeon/amdgpu, will return successfully only if amdkfd_init_completed is
equal 1.
If amdkfd_init_completed is not equal to 1, kgd2kfd_init() will
return -EPROBE_DEFER to signal radeon/amdgpu they need to defer
their loading until amdkfd is loaded.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We weren't updating the interlaced bit, so we'd scan out incorrectly
if the firmware had brought up the TV encoder and we were switching to
HDMI.
Signed-off-by: Eric Anholt <eric@anholt.net>
It looks like when I went to add the interlaced bits, I just took the
existing PV_VERT* block and indented it, instead of copy and pasting
it first. Without this, changing resolution never worked.
Signed-off-by: Eric Anholt <eric@anholt.net>
If the firmware hadn't brought up HDMI for us, we need to do its
power-on reset sequence (reset HD and and clear its STANDBY bits,
reset HDMI, and leave the PHY disabled).
Signed-off-by: Eric Anholt <eric@anholt.net>
We'd need X to queue up an async pageflip while another is
outstanding, and then take a SIGIO. I think X actually avoids sending
out the next pageflip while one's already queued, but I'm not sure.
Signed-off-by: Eric Anholt <eric@anholt.net>
It's simpler to just use snprintf() to print this to one buffer instead
of using strcpy() and strcat(). Also using snprintf() is slightly safer
than using sprintf().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Given that the intel_lr_context_pin cannot succeed without the object,
we cannot reach intel_lr_context_unpin() without first allocating that
object - so we can remove the redundant test.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456485751-15213-1-git-send-email-tvrtko.ursulin@linux.intel.com
The multiple levels of indirect do nothing but hinder the compiler and
the pointer chasing turns to be quite painful but painless to fix.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456484600-11477-1-git-send-email-tvrtko.ursulin@linux.intel.com
Elsewhere we have adopted the convention of using '_link' to denote
elements in the list (and '_list' for the actual list_head itself), and
that the name should indicate which list the link belongs to (and
preferrably not just where the link is being stored).
s/vma_link/obj_link/ (we iterate over obj->vma_list)
s/mm_list/vm_link/ (we iterate over vm->[in]active_list)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
commit 0973128002
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Feb 17 14:17:42 2016 +0200
drm/i915: Add helper to get a display power ref if it was already enabled
left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as
intel_runtime_pm_get_if_in_use() would return true without incrementing
the local bookkeeping required for the assertions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456434628-22574-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>
The cache line offset for the Indirect CS context (0x21C8) varies from gen
to gen.
v2: Move it into a function (Arun), use MISSING_CASE (Chris)
v3: Rebased (catched by ci bat)
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456223509-6454-1-git-send-email-michel.thierry@intel.com
Display fps on demand for each used plane:
cat /sys/kernel/debug/dri/0/fps_get
Display fps in live in the console for each used plane:
echo 255 > /sys/kernel/debug/dri/0/fps_show
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Configures the framer of the HDMI connection.
By default starts in HDMI mode and can be swtich to DVI.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Make the value of the colorspace of the HDMI infoframe configurable.
HDMI colorspace could be: RGB, YUV422 or YUV444
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Vendor specific infoframe is mandatory for 4K2K resolution.
Without this, the HDMI protocol compliance fails.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Clear all infoframe registers when the HDMI link is stopped.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Set the infoframe transmission mode according to the type of
the infoframe.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Make sure the HD DACS are disabled when the HDA connector
is created.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Modify AWG algorithm in order to handle more than 1023 lines
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Modify delay to display last pixel column on DVO
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
The DVO connector is tag as disconnect because of a wrong management
of the panel detection.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Disable the clipping mode for hdmi, dvo and hda connectors.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Use BT601 for SD/ED resolution and BT709 for HD resolution
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Atomic update should never fail. Thus all checks must be done in
the atomic_check function for each plane (gdp, hqvdp and cursor).
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
It may happen that the cursor is displayed with wrong colors which can
be explained by a CLUT wrongly fetched at the first display.
Fetching the CLUT at each commit (=move) ensures that the right colors
are used, at least from the first cursor move.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
GDP source width should be equal to the destination width to get
rid of this issue.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
When a GDP gets a scale request (which it does not support), it accepts it
but crops or clamps and outputs a warning message.
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Only RGB formats supported by GDP planes
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
When a frame or a field is skipped, output a Warning message instead of
an Error message.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
data_en is a local variable that doesn't need to be set as
awg_generate_instr can be called directly with the requested value.
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
This update eases to understand the VTG programming.
It also sets a VTG output id for each supported connectors.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
sti now support of atomic modesetting so set the flag to enable it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Set CRTC modesetting parameters to avoid warnings in atomic mode.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
In some cases last_close() could be called before sti_gdp_disable()
and make kernel crash because mixer structure has been destroy.
Let's gdp keep a reference on vtg to fix that (like it is already done
in HQVDP)
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for
Vybrid) whereas the register enumeration start from 1 (1-10 for
LS1021a and 1-9 for Vybrid). The loop started off from 0 for both
iterations and initialized the number of layers inclusive, which
is one layer too many.
All extensively written registers seem to be unassigned, it seems
that the write to those registers did not do any harm in practice.
Signed-off-by: Stefan Agner <stefan@agner.ch>
The current default configuration is as follows:
- Invert VSYNC signal (active LOW)
- Invert HSYNC signal (active LOW)
The mode flags allow to specify the required polarity per
mode. Furthermore, none of the current driver settings is
actually a standard polarity.
This patch applies the current driver default polarities as
explicit flags to the display which has been introduced with
the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
also parses the flags field and applies the configuration
accordingly, by using the following values as standard
polarities: (e.g. when no flags are specified):
- VSYNC signal not inverted (active HIGH)
- HSYNC signal not inverted (active HIGH)
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Fix alpha blending by enabling alpha blending for the whole frame if
a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also
support color modes without alpha channel (DRM_FORMAT_XRGB*) by just
not enabling alpha blending on layer level.
Signed-off-by: Stefan Agner <stefan@agner.ch>
The state of the interrupt mask register on initialization is
unknown, e.g. U-Boot could already used the DCU. So depending on
the boot loader, the outcome of the interrupt mask register could
be different. A defined state is much more preferable. Also, there
is no value in keeping interrupts enabled which we don't need.
Therefor, mask all interrupts on initialization.
Signed-off-by: Stefan Agner <stefan@agner.ch>
If initialization fails (e.g. due to missing panel node or deferred
probe) make sure to roll-back all operations and return the error
code.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Improve error handling during CRTC initialization. Especially avoid
memory leaks in the primary plane initialization error path.
Signed-off-by: Stefan Agner <stefan@agner.ch>
It is not common to do regmap return value checks, especially not
for memory mapped device. We can rule out most error returns since
the conditions are static and we know they are ok (e.g. offset
aligned to register stride). Also without proper error handling
they are not really valuable for the user. Hence remove most of
them.
The check in the interrupt handler is worth keeping since a
volatile register won't be readable in case register caching is
still enabled.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Since we are using cached registers, we need to specify volatile
registers explicitly to avoid reading their value from the cache.
This allows to read the correct interrupt status in fsl_dcu_drm_irq
and clear the asserted bits only.
Signed-off-by: Stefan Agner <stefan@agner.ch>
For state->fb or state->crtc may be NULL in fsl_dcu_drm_plane_atomic_check
function, if so, return 0.
Signed-off-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
By default, not only this driver is enabled on all platforms, but also
generic PM Domains and Multi-Function Devices.
Drop the "default y" to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When I reworked this code, I messed up num rb count.
v2: use hweight32
Reviewed-by: Ken Wang <Qingquing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use devm_kzalloc() and devm_kcalloc() for private data allocation at
driver load time.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Initialize port device node pointer in the tilcdc crtc. Fixes "Falling
back to first CRTC" warning from tda998x driver.
The tda998x encoder driver calls drm_of_find_possible_crtcs() to
initialize possible_crtcs of struct drm_encoder. The crtc->port needs
to be initialized for drm_of_find_possible_crtcs() to work.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Disable the sync lost interrupt if it fires on every frame for 50
consecutive frames in a row. This is relatively sure sign of the sync
lost interrupt being stuck and firing on every frame even if the
display otherwise appears to work OK.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add ratelimited prints on sync lost and FIFO underrun interrupts.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Removes the duplicate LCDC_INT_ENABLE_SET_REG-entry in registers array.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fix interrupt enable/disable code for version 2 tilcdc. In version 2
tilcdc there is a separate register for disabling interrupts. Writing
0 to enable registers bits does not have any effect. The interrupt
clear register works the same way, writing 1 to specific bit disables
the interrupt and writing 0 does not have any effect.
The "bug" that is fixed here does not really do any harm since the
interrupts are enabled only once in the power up and disabled before
power down.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Do not update the next frame buffer close to vertical blank. This is
to avoid situation when the frame changes between writing of
LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Get rid of complex ping-pong mechanism and replace it with simpler
single buffer flipping code.
The LCDC HW appears to be designed mainly static framebuffers in
mind. There are two modes of operation, either static single buffer,
or ping pong double buffering with two static buffers switching back
and forth. Luckily the framebuffer start address is fetched only in
the beginning of the frame and changing the address after that only
takes effect after the next vertical blank. The page flipping code can
simply write the address of the new framebuffer and the page is
flipped automatically after the next vertical blank. Using the ping
pong double buffering makes the flipping code way more complex and it
does not provide any benefit, so it is better to switch to single
buffer operation.
There is still one problem in updating the framebuffer dma address on
the fly. There are two registers defining the framebuffer dma area and
things may break if the dma address is fetched in while the registers
are are being updated.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Cleanup irq handling. Clear the irq status unconditionally and
restructure the status bit conditions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Remove broken error handling. The condition for handling the
LCDC_SYNC_LOST and LCDC_FIFO_UNDERFLOW could never be satisfied as the
LCDC_SYNC_LOST interrupt is not enabled. Also the requirement to have
both LCDC_SYNC_LOST and LCDC_FIFO_UNDERFLOW fired at once before
handling the error looks weird.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Split reset to a separate function and use usleep_range(250, 1000)
instead of msleep(1) to to keep the reset bit on long enough.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch, changed mdelay(500) to usleep_range(250, 1000)]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Disable crtc on unload. Call tilcdc_crtc_dpms() with DRM_MODE_DPMS_OFF
in the beginning of unload function.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Cleanup runtime PM handling. Before the patch the usage of pm_runtime
calls was inconsistent and hard to follow. After the update the
pm_runtime calls are removed from set_scanout() and called around
major operations that access the HW. After the patch the DPMS code does
not have pm_runtime_forbid/allow calls any more and
pm_runtime_irq_safe() is not set anymore.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Allocate suspend/resume register storage based on the actual number
registers the driver is aware of. The static allocation for register
storage had fallen behind badly.
Reported-by: Michael Bode <michael@bumbleB.de>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fix build error when !CONFIG_CPU_FREQ
drivers/gpu/drm/tilcdc/tilcdc_drv.c: In function 'tilcdc_load':
drivers/gpu/drm/tilcdc/tilcdc_drv.c:327:1: error: label 'fail_put_clk' defined but not used [-Werror=unused-label]
fail_put_clk:
^
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There is nothing special about tilcdc HW when the video memory is
concerned. Just using the standard drm helpers for implementation is
enough.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The LCD controller must be deactivated and all DMA transactions stopped
when the suspend power state is entered otherwise the PRCM causes the L3
bus to get stuck in transition state.
This commit forces the lcdc to be shut down and waits for all pending DMA
transactions to complete as part of the suspend handler for this driver.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The frame_done interrupt was only being enabled when the vsync
interrupts were being enabled by DRM. However the frame_done is
used to determine if the LCD controller has successfully completed
the raster_enable, raster_disable commands and the vsync interrupts
are not always enabled during these operations.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
On BeagleBone Black if no HDMI monitor is connected and suspend
is requested a kernel panic will result:
root@am335x-evm:~# echo mem > /sys/power/state
[ 65.548710] PM: Syncing filesystems ... done.
[ 65.631311] Freezing user space processes ... (elapsed 0.006 seconds) done.
[ 65.648619] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[ 65.833500] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e004
[ 65.841692] Internal error: : 1028 [#1] SMP ARM
<snip>
[ 66.105287] [<c03765f0>] (platform_pm_suspend) from [<c037b6d4>] (dpm_run_callback+0x34/0x70)
[ 66.114370] [<c037b6d4>] (dpm_run_callback) from [<c037ba84>] (__device_suspend+0x10c/0x2f4)
[ 66.123357] [<c037ba84>] (__device_suspend) from [<c037d004>] (dpm_suspend+0x58/0x218)
[ 66.131796] [<c037d004>] (dpm_suspend) from [<c008d948>] (suspend_devices_and_enter+0x9c/0x3c0)
[ 66.141055] [<c008d948>] (suspend_devices_and_enter) from [<c008de7c>] (pm_suspend+0x210/0x24c)
[ 66.150312] [<c008de7c>] (pm_suspend) from [<c008cabc>] (state_store+0x68/0xb8)
[ 66.158103] [<c008cabc>] (state_store) from [<c02e9654>] (kobj_attr_store+0x14/0x20)
[ 66.166355] [<c02e9654>] (kobj_attr_store) from [<c0185c70>] (sysfs_kf_write+0x4c/0x50)
[ 66.174883] [<c0185c70>] (sysfs_kf_write) from [<c018926c>] (kernfs_fop_write+0xb4/0x150)
[ 66.183598] [<c018926c>] (kernfs_fop_write) from [<c0122638>] (vfs_write+0xa8/0x180)
[ 66.191846] [<c0122638>] (vfs_write) from [<c01229f8>] (SyS_write+0x40/0x8c)
[ 66.199365] [<c01229f8>] (SyS_write) from [<c000e580>] (ret_fast_syscall+0x0/0x48)
[ 66.207426] Code: e595c210 e5932000 e59cc000 e08c2002 (e592c000)
This is because the lcdc module is not enabled when no monitor is detected
to save power. However the suspend handler just blindly tries to save the
lcdc state by copying out the pertinent registers. However module is off
so no good things happen when you try and access it.
This patch only saves off the registers if the module is enabled, and
then only restores the registers on resume if they were saved off during
suspend.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Update tilcdc driver to set the state of the pins to:
- "default on resume
- "sleep" on suspend
By optionally putting the pins into sleep state in the suspend callback
we can accomplish two things.
- minimize current leakage from pins and thus save power,
- prevent the IP from driving pins output in an uncontrolled manner,
which may happen if the power domain drops the domain regulator.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
LCDC hardware does not support fb pitch that is different (i.e. larger)
than the screen size. The driver currently does no checks for this, and
the results of too big pitch are are flickering and lower fps.
This issue easily happens when using libdrm's modetest tool with non-32
bpp modes. As modetest always allocated 4 bytes per pixel, it implies a
bigger pitch for 16 or 24 bpp modes.
This patch adds a check to reject pitches the hardware cannot support.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Updating the tilcdc DRM driver code to calculate the LCD controller
pixel clock more accurately. Based on a suggested implementation by
Tomi Valkeinen.
The current code does not work correctly and produces wrong results
with many requested clock rates. It also oddly uses two different
clocks, a display pll clock and a divider clock (child of display
pll), instead of just using the clock coming to the lcdc.
This patch removes the use of the display pll clock, and rewrites the
code to calculate the clock rates. The idea is simply to request a
clock rate of pixelclock*2, as the LCD controller has an internal
divider which we set to 2.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
[Rewrapped description]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Currently we perform our own wait in post_plane_update,
but the atomic core performs another one in wait_for_vblanks.
This means that 2 vblanks are done when a fb is changed,
which is a bit overkill.
Merge them by creating a helper function that takes a crtc mask
for the planes to wait on.
The broadwell vblank workaround may look gone entirely but this is
not the case. pipe_config->wm_changed is set to true
when any plane is turned on, which forces a vblank wait.
Changes since v1:
- Removing the double vblank wait on broadwell moved to its own commit.
Changes since v2:
- Move out POWER_DOMAIN_MODESET handling to its own commit.
Changes since v3:
- Do not wait for vblank on legacy cursor updates. (Ville)
- Move broadwell vblank workaround comment to page_flip_finished. (Ville)
Changes since v4:
- Compile fix, legacy_cursor_flip -> *_update.
Changes since v5:
- Kill brackets.
- Add WARN_ON when wait_for_vblanks fails.
- Remove extra newlines.
- Split the checks whether vblank is needed to a separate function,
with comments why a vblank is needed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56CD84DA.5030507@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Use our newly created encoder_mask to iterate over the encoders.
This makes it possible to get the crtc power domains from the
crtc_state at any time, without any locks or having to look at
the legacy state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455108583-29227-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
This can happen under some annoying circumstances, and is a quick fix
until more substantial changes can be made.
Fixed eDP mode changes on (at least) the Lenovo P50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
This is a bit large, but it really helps Skylake bugs we are seeing
on a number of laptops.
Most of the commits are quite similar, ensuring the display power
doesn't vanish under us during hardware access. Also do note that it's
not just Skylake that's affected.
* tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel:
drm/i915/gen9: Verify and enforce dc6 state writes
drm/i915/gen9: Check for DC state mismatch
drm/i915/skl: Ensure HW is powered during DDB HW state readout
drm/i915/lvds: Ensure the HW is powered during HW state readout
drm/i915/hdmi: Ensure the HW is powered during HW state readout
drm/i915/dsi: Ensure the HW is powered during HW state readout
drm/i915/dp: Ensure the HW is powered during HW state readout
drm/i915: Ensure the HW is powered when accessing the CRC HW block
drm/i915/ddi: Ensure the HW is powered during HW state readout
drm/i915/crt: Ensure the HW is powered during HW state readout
drm/i915: Ensure the HW is powered during HW access in assert_pipe
drm/i915: Ensure the HW is powered when disabling VGA
drm/i915/ibx: Ensure the HW is powered during PLL HW readout
drm/i915: Ensure the HW is powered during display pipe HW readout
drm/i915: Add helper to get a display power ref if it was already enabled
That should make user space bugs more obvious.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The event_data passed from pem_fini was not cleared upon initialization.
This caused NULL checks to pass and cast_const_phw_tonga_power_state to
attempt to dereference an invalid pointer. Clear the event_data in
pem_init and pem_fini before calling pem_handle_event.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Bradley Pankow <btpankow@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print a message when the HDMI I2C slave encoder can't be found to help
debugging probe deferral issues.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration.
Add support for the Gen3 LVDS PLL parameters and startup procedure.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.
Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DE signal is currently configured to be identical to the DISP
signal and is used for the same purpose. To make it clearer that the
DISP pin outputs the DISP signal, select it explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The Gen3 R8A7795 DU has 4 CRTCs, support them all.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LVDS support depends on DRM_RCAR_DU which already depends on OF. Drop
the explicit dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7795 SoC is ARM64-based and include a DU. Enable driver
compilation on ARM64.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use %tu instead of %u to print difference between pointers.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On R-Car Gen3 SoCs the DU lost its ability to access memory directly and
needs to work in conjunction with the VSP to do so. This commit handles
the VSP internally to hide it from the user.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Starting from BDW the DE_PIPE interrupts for pipe B and C belong to the
relevant display power well. So we should make sure we've finished
processing them before turning off the power well.
The pipe interrupts shouldn't really happen at this point anymore since
we've already shut down the planes/pipes/whatnot, but being a bit
paranoid shouldn't hurt.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455907651-16397-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
After we've told the irq code we don't want to handle display irqs
anymore, we must make sure any display irq handling already
kicked off has finished before we actually turn off the power well.
I wouldn't expect PIPESTAT based interrupts to occur anymore since
vblanks/page flips/gmbus/etc should all be quiescent at this point.
But at least hotplug interrupts could still occur. Hotplug
interrupts may also kick off the workqueue based hotplug processing,
but that code should take the required power domain references
itself, so there shouldn't be any need to synchronize with the
hotplug processing from the power well code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455900112-15387-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
PIPESTAT registers live in the display power well on VLV/CHV, so we
shouldn't access them when things are powered down. Let's check
whether the display interrupts are on or off before accessing the
PIPESTAT registers.
Another option would be to read the PIPESTAT registers only when
the IIR register indicates that there's a pending pipe event. But
that would mean we might miss even more underrun reports than we
do now, because the underrun status bit lives in PIPESTAT but doesn't
actually generate an interrupt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93738
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455825266-24686-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
It has been observed that sometimes disabling the dc6 fails
and dc6 state pops back up, brief moment after disabling. This
has to be dmc save/restore timing issue or other bug in the
way dc states are handled.
Try to work around this issue as we don't have firmware fix
yet available. Verify that the value we wrote for the dmc sticks,
and also enforce it by rewriting it, if it didn't.
v2: Zero rereads on rewrite for extra paranoia (Imre)
Testcase: kms_flip/basic-flip-vs-dpms
References: https://bugs.freedesktop.org/show_bug.cgi?id=93768
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455811089-27884-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 779cb5d3dd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The DMC can incorrectly run off and allow DC states on it's own. We
don't know the root-cause for this yet but this patch makes it more
visible.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455808874-22089-2-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 832dba889e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
I.e., doesn't make sense to change power states or check the
temperature when the asic is powered off.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like a copy paste typo when we added powerplay
support.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like a copy/paste typo.
Reviewed-by: Christian König <christian.koenig@amd.com>
Noticed-by: David Panariti <David.Panariti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Spotted-by: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93441
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455719489-3008-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 4d80003023)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-13-git-send-email-imre.deak@intel.com
(cherry picked from commit ecb2448218)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-12-git-send-email-imre.deak@intel.com
(cherry picked from commit 5b0921748c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-11-git-send-email-imre.deak@intel.com
(cherry picked from commit 3f3f42b887)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-10-git-send-email-imre.deak@intel.com
(cherry picked from commit 6fa9a5ecf7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
While at it also add the missing reference around the HW access in
i915_interrupt_info().
v2:
- update the commit message mentioning that this also fixes the
HW access in the interrupt info debugfs entry (Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-9-git-send-email-imre.deak@intel.com
(cherry picked from commit e129649b7a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-8-git-send-email-imre.deak@intel.com
(cherry picked from commit e27daab497)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93439
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-7-git-send-email-imre.deak@intel.com
(cherry picked from commit 1c8fdda1ea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-6-git-send-email-imre.deak@intel.com
(cherry picked from commit 4feed0ebfa)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-5-git-send-email-imre.deak@intel.com
(cherry picked from commit 6392f8478e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-4-git-send-email-imre.deak@intel.com
(cherry picked from commit 12fda3876d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Revieved-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-3-git-send-email-imre.deak@intel.com
(cherry picked from commit 1729050eb4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have many places in the code where we check if a given display power
domain is enabled and if so access registers backed by this power
domain. We assumed that some modeset lock will prevent the power
reference from vanishing in the middle of the HW access, but this
assumption doesn't always hold. In such cases we get either the wakeref
not held, or an unclaimed register access error message. To fix this in
a future-proof way that's independent of other locks wrap any such
access with a get_ref_if_enabled()/put_ref() pair.
Kudos to Ville and Joonas for the ideas of this new interface.
v2:
- init the power_domains ptr when declaring it everywhere (Joonas)
v3:
- don't report the device to be powered if runtime PM is disabled
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455711462-7442-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 0973128002)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cores need to be included into the debug mask. We don't exactly
know what it does but the spec says it must be enabled. So obey.
v2: Cores should be only set for BXT (Imre, Art)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Runyan, Arthur J <arthur.j.runyan@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455877564-5128-1-git-send-email-mika.kuoppala@intel.com
It has been observed that sometimes disabling the dc6 fails
and dc6 state pops back up, brief moment after disabling. This
has to be dmc save/restore timing issue or other bug in the
way dc states are handled.
Try to work around this issue as we don't have firmware fix
yet available. Verify that the value we wrote for the dmc sticks,
and also enforce it by rewriting it, if it didn't.
v2: Zero rereads on rewrite for extra paranoia (Imre)
Testcase: kms_flip/basic-flip-vs-dpms
References: https://bugs.freedesktop.org/show_bug.cgi?id=93768
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455811089-27884-1-git-send-email-mika.kuoppala@intel.com
The DMC can incorrectly run off and allow DC states on it's own. We
don't know the root-cause for this yet but this patch makes it more
visible.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455808874-22089-2-git-send-email-mika.kuoppala@intel.com
The plane allocator is specific to DU planes and won't be used for
VSP-based planes, move it with the rest of the DU planes code where it
belongs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Plane sources are configured by the VSPS bit in the PnDDCR4 register.
Although the datasheet states that the bit is updated during vertical
blanking, it seems that updates only occur when the DU group is held in
reset through the DSYSR.DRES bit. Restart the group if the source
changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Configure the plane source at plane setup time to source frames from
memory or from the VSP1.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7790 DU can source frames directly from the VSP1 devices VSPD0
and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0
or DU0/1 plane 1.
Allocate the correct fixed plane when sourcing frames from VSPD0 or
VSPD1, and allocate planes in reverse index order otherwise to ensure
maximum availability of planes 0 and 1.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Rename plane setup functions using more explicit names, and use local
variables to store intermediate values to increase readability. This
also prepares for VSP compositor support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
There's no need for a read-modify-write pattern, all register bits can
be set explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
A disabled CRTC can't display planes, the driver shouldn't try to
configure it when updating planes. The DRM core will store the plane
state for us, and the plane will be configured appropriately the next
time the CRTC is enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The atomic framework guarantees that the CRTC enable and disable
functions will only be called when needed, there's no need to duplicate
the CRTC state check. By replacing the local CRTC enabled state check at
resume time with the CRTC active state we can remove the local CRTC
enabled state altogether.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.
For consistency inline the .unload() handler in the remove function as
well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Russell King