Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch fixes the sampling interrupt throttling mechanism.
It was broken in v3.2. Events were not being unthrottled. The
unthrottling mechanism required that events be checked at each
timer tick.
This patch solves this problem and also separates:
- unthrottling
- multiplexing
- frequency-mode period adjustments
Not all of them need to be executed at each timer tick.
This third version of the patch is based on my original patch +
PeterZ proposal (https://lkml.org/lkml/2012/1/7/87).
At each timer tick, for each context:
- if the current CPU has throttled events, we unthrottle events
- if context has frequency-based events, we adjust sampling periods
- if we have reached the jiffies interval, we multiplex (rotate)
We decoupled rotation (multiplexing) from frequency-mode sampling
period adjustments. They should not necessarily happen at the same
rate. Multiplexing is subject to jiffies_interval (currently at 1
but could be higher once the tunable is exposed via sysfs).
We have grouped frequency-mode adjustment and unthrottling into the
same routine to minimize code duplication. When throttled while in
frequency mode, we scan the events only once.
We have fixed the threshold enforcement code in __perf_event_overflow().
There was a bug whereby it would allow more than the authorized rate
because an increment of hwc->interrupts was not executed at the right
place.
The patch was tested with low sampling limit (2000) and fixed periods,
frequency mode, overcommitted PMU.
On a 2.1GHz AMD CPU:
$ cat /proc/sys/kernel/perf_event_max_sample_rate
2000
We set a rate of 3000 samples/sec (2.1GHz/3000 = 700000):
$ perf record -e cycles,cycles -c 700000 noploop 10
$ perf report -D | tail -21
Aggregated stats:
TOTAL events: 80086
MMAP events: 88
COMM events: 2
EXIT events: 4
THROTTLE events: 19996
UNTHROTTLE events: 19996
SAMPLE events: 40000
cycles stats:
TOTAL events: 40006
MMAP events: 5
COMM events: 1
EXIT events: 4
THROTTLE events: 9998
UNTHROTTLE events: 9998
SAMPLE events: 20000
cycles stats:
TOTAL events: 39996
THROTTLE events: 9998
UNTHROTTLE events: 9998
SAMPLE events: 20000
For 10s, the cap is 2x2000x10 = 40000 samples.
We get exactly that: 20000 samples/event.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: <stable@kernel.org> # v3.2+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120126160319.GA5655@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Extend the mmap control page with fields so that userspace can compute
time deltas relative to the provided time fields.
Currently only implemented for x86 with constant and nonstop TSC.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-3u1jucza77j3wuvs0x2bic0f@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Put the logic to compute the event index into a per pmu method. This
is required because the x86 rules are weird and wonderful and don't
match the capabilities of the current scheme.
AFAIK only powerpc actually has a usable userspace read of the PMCs
but I'm not at all sure anybody actually used that.
ARM is restored to the default since it currently does not support
userspace access at all. And all software events are provided with a
method that reports their index as 0 (disabled).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-dfydxodki16lylkt3gl2j7cw@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This event counts the number of reference core cpu cycles.
Reference means that the event increments at a constant rate which
is not subject to core CPU frequency adjustments. The event may
not count when the processor is in halted (low power) state.
As such, it may not be equivalent to wall clock time. However,
when the processor is not halted state, the event keeps
a constant correlation with wall clock time.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323559734-3488-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
jump_lable patching is very expensive operation that involves pausing all
cpus. The patching of perf_sched_events jump_label is easily controllable
from userspace by unprivileged user.
When te user runs a loop like this:
"while true; do perf stat -e cycles true; done"
... the performance of my test application that just increments a counter
for one second drops by 4%.
This is on a 16 cpu box with my test application using only one of
them. An impact on a real server doing real work will be worse.
Performance of KVM PMU drops nearly 50% due to jump_lable for "perf
record" since KVM PMU implementation creates and destroys perf event
frequently.
This patch introduces a way to rate limit jump_label patching and uses
it to fix the above problem.
I believe that as jump_label use will spread the problem will become more
common and thus solving it in a generic code is appropriate. Also fixing
it in the perf code would result in moving jump_label accounting logic to
perf code with all the ifdefs in case of JUMP_LABEL=n kernel. With this
patch all details are nicely hidden inside jump_label code.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111127155909.GO2557@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Gleb writes:
> Currently pmu is disabled and re-enabled on each timer interrupt even
> when no rotation or frequency adjustment is needed. On Intel CPU this
> results in two writes into PERF_GLOBAL_CTRL MSR per tick. On bare metal
> it does not cause significant slowdown, but when running perf in a virtual
> machine it leads to 20% slowdown on my machine.
Cure this by keeping a perf_event_context::nr_freq counter that counts the
number of active events that require frequency adjustments and use this in a
similar fashion to the already existing nr_events != nr_active test in
perf_rotate_context().
By being able to exclude both rotation and frequency adjustments a-priory for
the common case we can avoid the otherwise superfluous PMU disable.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-515yhoatehd3gza7we9fapaa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When you do:
$ perf record -e cycles,cycles,cycles noploop 10
You expect about 10,000 samples for each event, i.e., 10s at
1000samples/sec. However, this is not what's happening. You
get much fewer samples, maybe 3700 samples/event:
$ perf report -D | tail -15
Aggregated stats:
TOTAL events: 10998
MMAP events: 66
COMM events: 2
SAMPLE events: 10930
cycles stats:
TOTAL events: 3644
SAMPLE events: 3644
cycles stats:
TOTAL events: 3642
SAMPLE events: 3642
cycles stats:
TOTAL events: 3644
SAMPLE events: 3644
On a Intel Nehalem or even AMD64, there are 4 counters capable
of measuring cycles, so there is plenty of space to measure those
events without multiplexing (even with the NMI watchdog active).
And even with multiplexing, we'd expect roughly the same number
of samples per event.
The root of the problem was that when the event that caused the buffer
to become full was not the first event passed on the cmdline, the user
notification would get lost. The notification was sent to the file
descriptor of the overflowed event but the perf tool was not polling
on it. The perf tool aggregates all samples into a single buffer,
i.e., the buffer of the first event. Consequently, it assumes
notifications for any event will come via that descriptor.
The seemingly straight forward solution of moving the waitq into the
ringbuffer object doesn't work because of life-time issues. One could
perf_event_set_output() on a fd that you're also blocking on and cause
the old rb object to be freed while its waitq would still be
referenced by the blocked thread -> FAIL.
Therefore link all events to the ringbuffer and broadcast the wakeup
from the ringbuffer object to all possible events that could be waited
upon. This is rather ugly, and we're open to better solutions but it
works for now.
Reported-by: Stephane Eranian <eranian@google.com>
Finished-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111126014731.GA7030@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The two new attributes exclude_guest and exclude_host can
bes used by user-space to tell the kernel to setup
performance counter to either only count while the CPU is in
guest or in host mode.
An additional check is also introduced to make sure
user-space does not try to exclude guest and host mode from
counting.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1317816084-18026-2-git-send-email-gleb@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current cgroup context switch code was incorrect leading
to bogus counts. Furthermore, as soon as there was an active
cgroup event on a CPU, the context switch cost on that CPU
would increase by a significant amount as demonstrated by a
simple ping/pong example:
$ ./pong
Both processes pinned to CPU1, running for 10s
10684.51 ctxsw/s
Now start a cgroup perf stat:
$ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 100
$ ./pong
Both processes pinned to CPU1, running for 10s
6674.61 ctxsw/s
That's a 37% penalty.
Note that pong is not even in the monitored cgroup.
The results shown by perf stat are bogus:
$ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 100
Performance counter stats for 'sleep 100':
CPU1 <not counted> cycles test
CPU1 16,984,189,138 cycles # 0.000 GHz
The second 'cycles' event should report a count @ CPU clock
(here 2.4GHz) as it is counting across all cgroups.
The patch below fixes the bogus accounting and bypasses any
cgroup switches in case the outgoing and incoming tasks are
in the same cgroup.
With this patch the same test now yields:
$ ./pong
Both processes pinned to CPU1, running for 10s
10775.30 ctxsw/s
Start perf stat with cgroup:
$ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10
Run pong outside the cgroup:
$ /pong
Both processes pinned to CPU1, running for 10s
10687.80 ctxsw/s
The penalty is now less than 2%.
And the results for perf stat are correct:
$ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10
Performance counter stats for 'sleep 10':
CPU1 <not counted> cycles test # 0.000 GHz
CPU1 23,933,981,448 cycles # 0.000 GHz
Now perf stat reports the correct counts for
for the non cgroup event.
If we run pong inside the cgroup, then we also get the
correct counts:
$ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10
Performance counter stats for 'sleep 10':
CPU1 22,297,726,205 cycles test # 0.000 GHz
CPU1 23,933,981,448 cycles # 0.000 GHz
10.001457237 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110825135803.GA4697@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KVM needs one-shot samples, since a PMC programmed to -X will fire after X
events and then again after 2^40 events (i.e. variable period).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-4-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf_event overflow handler does not receive any caller-derived
argument, so many callers need to resort to looking up the perf_event
in their local data structure. This is ugly and doesn't scale if a
single callback services many perf_events.
Fix by adding a context parameter to perf_event_create_kernel_counter()
(and derived hardware breakpoints APIs) and storing it in the perf_event.
The field can be accessed from the callback as event->overflow_handler_context.
All callers are updated.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a NODE level to the generic cache events which is used to measure
local vs remote memory accesses. Like all other cache events, an
ACCESS is HIT+MISS, if there is no way to distinguish between reads
and writes do reads only etc..
The below needs filling out for !x86 (which I filled out with
unsupported events).
I'm fairly sure ARM can leave it like that since it doesn't strike me as
an architecture that even has NUMA support. SH might have something since
it does appear to have some NUMA bits.
Sparc64, PowerPC and MIPS certainly want a good look there since they
clearly are NUMA capable.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Miller <davem@davemloft.net>
Cc: Anton Blanchard <anton@samba.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch improves the code managing the extra shared registers
used for offcore_response events on Intel Nehalem/Westmere. The
idea is to use static allocation instead of dynamic allocation.
This simplifies greatly the get and put constraint routines for
those events.
The patch also renames per_core to shared_regs because the same
data structure gets used whether or not HT is on. When HT is
off, those events still need to coordination because they use
a extra MSR that has to be shared within an event group.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110606145703.GA7258@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since only samples call perf_output_sample() its much saner (and more
correct) to put the sample logic in there than in the
perf_output_begin()/perf_output_end() pair.
Saves a useless argument, reduces conditionals and shrinks
struct perf_output_handle, win!
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-2crpvsx3cqu67q3zqjbnlpsc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.
For the various event classes:
- hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
the PMI-tail (ARM etc.)
- tracepoint: nmi=0; since tracepoint could be from NMI context.
- software: nmi=[0,1]; some, like the schedule thing cannot
perform wakeups, and hence need 0.
As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).
The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reorder perf_event_context to remove 8 bytes of 64 bit alignment padding
shrinking its size to 192 bytes, allowing it to fit into a smaller slab
and use one fewer cache lines.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1307460819.1950.5.camel@castor.rsk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix include/linux/perf_event.h comments to be consistent with
the actual #define names. This is trivial, but it can be a bit
confusing when first reading through the file.
Signed-off-by: Vince Weaver <vweaver1@eecs.utk.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1106031757090.29381@cl320.eecs.utk.edu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add two generic hardware events: front-end and back-end stalled cycles.
These events measure conditions when the CPU is executing code but its
capabilities are not fully utilized. Understanding such situations and
analyzing them is an important sub-task of code optimization workflows.
Both events limit performance: most front end stalls tend to be caused
by branch misprediction or instruction fetch cachemisses, backend
stalls can be caused by various resource shortages or inefficient
instruction scheduling.
Front-end stalls are the more important ones: code cannot run fast
if the instruction stream is not being kept up.
An over-utilized back-end can cause front-end stalls and thus
has to be kept an eye on as well.
The exact composition is very program logic and instruction mix
dependent.
We use the terms 'stall', 'front-end' and 'back-end' loosely and
try to use the best available events from specific CPUs that
approximate these concepts.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n000io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
include/linux/perf_event.h
Merge reason: pick up the latest jump-label enhancements, they are cooked ready.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new PERF_COUNT_HW_STALLED_CYCLES event tries to approximate
cycles the CPU does nothing useful, because it is stalled on a
cache-miss or some other condition.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-fue11vymwqsoo5to72jxxjyl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce:
static __always_inline bool static_branch(struct jump_label_key *key);
instead of the old JUMP_LABEL(key, label) macro.
In this way, jump labels become really easy to use:
Define:
struct jump_label_key jump_key;
Can be used as:
if (static_branch(&jump_key))
do unlikely code
enable/disale via:
jump_label_inc(&jump_key);
jump_label_dec(&jump_key);
that's it!
For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.
Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.
Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.
Testing:
I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.
jump label configured in
avg: 815.6
jump label *not* configured in (using atomic reads)
avg: 800.1
jump label *not* configured in (regular reads)
avg: 803.4
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Suggested-by: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jiri reported:
|
| - once an event is created by sys_perf_event_open, task context
| is created and it stays even if the event is closed, until the
| task is finished ... thats what I see in code and I assume it's
| correct
|
| - when the task opens event, perf_sched_events jump label is
| incremented and following callbacks are started from scheduler
|
| __perf_event_task_sched_in
| __perf_event_task_sched_out
|
| These callback *in/out set/unset cpuctx->task_ctx value to the
| task context.
|
| - close is called on event on CPU 0:
| - the task is scheduled on CPU 0
| - __perf_event_task_sched_in is called
| - cpuctx->task_ctx is set
| - perf_sched_events jump label is decremented and == 0
| - __perf_event_task_sched_out is not called
| - cpuctx->task_ctx on CPU 0 stays set
|
| - exit is called on CPU 1:
| - the task is scheduled on CPU 1
| - perf_event_exit_task is called
| - task_ctx_sched_out unsets cpuctx->task_ctx on CPU 1
| - put_ctx destroys the context
|
| - another call of perf_rotate_context on CPU 0 will use invalid
| task_ctx pointer, and eventualy panic.
|
Cure this the simplest possibly way by partially reverting the
jump_label optimization for the sched_out case.
Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org> # .37+
LKML-Reference: <1301520405.4859.213.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch solves a stale pointer problem in
update_cgrp_time_from_cpuctx(). The cpuctx->cgrp
was not cleared on all possible event exit paths,
including:
close()
perf_release()
perf_release_kernel()
list_del_event()
This patch fixes list_del_event() to clear cpuctx->cgrp
when there are no cgroup events left in the context.
[ This second version makes the code compile when
CONFIG_CGROUP_PERF is not enabled. We unconditionally define
perf_cpu_context->cgrp. ]
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: perfmon2-devel@lists.sf.net
Cc: paulus@samba.org
Cc: davem@davemloft.net
LKML-Reference: <20110323150306.GA1580@quad>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove 8 bytes of alignment padding from perf_event_context on 64 bit
builds which shrinks its size to 192 bytes allowing it to fit into one
fewer cache lines and into a smaller slab.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299512819.2039.5.camel@castor.rsk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change logs against Andi's original version:
- Extends perf_event_attr:config to config{,1,2} (Peter Zijlstra)
- Fixed a major event scheduling issue. There cannot be a ref++ on an
event that has already done ref++ once and without calling
put_constraint() in between. (Stephane Eranian)
- Use thread_cpumask for percore allocation. (Lin Ming)
- Use MSR names in the extra reg lists. (Lin Ming)
- Remove redundant "c = NULL" in intel_percore_constraints
- Fix comment of perf_event_attr::config1
Intel Nehalem/Westmere have a special OFFCORE_RESPONSE event
that can be used to monitor any offcore accesses from a core.
This is a very useful event for various tunings, and it's
also needed to implement the generic LLC-* events correctly.
Unfortunately this event requires programming a mask in a separate
register. And worse this separate register is per core, not per
CPU thread.
This patch:
- Teaches perf_events that OFFCORE_RESPONSE needs extra parameters.
The extra parameters are passed by user space in the
perf_event_attr::config1 field.
- Adds support to the Intel perf_event core to schedule per
core resources. This adds fairly generic infrastructure that
can be also used for other per core resources.
The basic code has is patterned after the similar AMD northbridge
constraints code.
Thanks to Stephane Eranian who pointed out some problems
in the original version and suggested improvements.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299119690-13991-2-git-send-email-ming.m.lin@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By pre-computing the maximum number of samples per tick we can avoid a
multiplication and a conditional since MAX_INTERRUPTS >
max_samples_per_tick.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This kernel patch adds the ability to filter monitoring based on
container groups (cgroups). This is for use in per-cpu mode only.
The cgroup to monitor is passed as a file descriptor in the pid
argument to the syscall. The file descriptor must be opened to
the cgroup name in the cgroup filesystem. For instance, if the
cgroup name is foo and cgroupfs is mounted in /cgroup, then the
file descriptor is opened to /cgroup/foo. Cgroup mode is
activated by passing PERF_FLAG_PID_CGROUP in the flags argument
to the syscall.
For instance to measure in cgroup foo on CPU1 assuming
cgroupfs is mounted under /cgroup:
struct perf_event_attr attr;
int cgroup_fd, fd;
cgroup_fd = open("/cgroup/foo", O_RDONLY);
fd = perf_event_open(&attr, cgroup_fd, 1, -1, PERF_FLAG_PID_CGROUP);
close(cgroup_fd);
Signed-off-by: Stephane Eranian <eranian@google.com>
[ added perf_cgroup_{exit,attach} ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590250.114ddf0a.689e.4482@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Simple sysfs emumeration of the PMUs.
Use a "event_source" bus, and add PMU devices using their name.
Each PMU device has a type attribute which contrains the value needed
for perf_event_attr::type to identify this PMU.
This is the minimal stub needed to start using this interface,
we'll consider extending the sysfs usage later.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.316982569@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Extend the perf_pmu_register() interface to allow for named and
dynamic pmu types.
Because we need to support the existing static types we cannot use
dynamic types for everything, hence provide a type argument.
If we want to enumerate the PMUs they need a name, provide one.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.259707703@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because the multi-pmu bits can share contexts between struct pmu
instances we could get duplicate events by iterating the pmu list.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If perf_event_attr.sample_id_all is set it will add the PERF_SAMPLE_ identity
info:
TID, TIME, ID, CPU, STREAM_ID
As a trailer, so that older perf tools can process new files, just ignoring the
extra payload.
With this its possible to do further analysis on problems in the event stream,
like detecting reordering of MMAP and FORK events, etc.
V2: Fixup header size in comm, mmap and task processing, as we have to take into
account different sample_types for each matching event, noticed by Thomas Gleixner.
Thomas also noticed a problem in v2 where if we didn't had space in the buffer we
wouldn't restore the header size.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those will be made available in sample like events like MMAP, EXEC, etc in a
followup patch. So precalculate the extra id header space and have a separate
routine to fill them up.
V2: Thomas noticed that the id header needs to be precalculated at
inherit_events too:
LKML-Reference: <alpine.LFD.2.00.1012031245220.2653@localhost6.localdomain6>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291318772-30880-2-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_SAMPLE_{CALLCHAIN,RAW} have variable lenghts per sample, but the others
can be precalculated, reducing a bit the per sample cost.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
and use it when appropriate.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-1-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stephane noticed that because the perf_sw_event() call is inside the
perf_event_task_sched_out() call it won't get called unless we
have a per-task counter.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It was found that sometimes children of tasks with inherited events had
one extra event. Eventually it turned out to be due to the list rotation
no being exclusive with the list iteration in the inheritance code.
Cure this by temporarily disabling the rotation while we inherit the events.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch corrects time tracking in samples. Without this patch
both time_enabled and time_running are bogus when user asks for
PERF_SAMPLE_READ.
One uses PERF_SAMPLE_READ to sample the values of other counters
in each sample. Because of multiplexing, it is necessary to know
both time_enabled, time_running to be able to scale counts correctly.
In this second version of the patch, we maintain a shadow
copy of ctx->time which allows us to compute ctx->time without
calling update_context_time() from NMI context. We avoid the
issue that update_context_time() must always be called with
ctx->lock held.
We do not keep shadow copies of the other event timings
because if the lead event is overflowing then it is active
and thus it's been scheduled in via event_sched_in() in
which case neither tstamp_stopped, tstamp_running can be modified.
This timing logic only applies to samples when PERF_SAMPLE_READ
is used.
Note that this patch does not address timing issues related
to sampling inheritance between tasks. This will be addressed
in a future patch.
With this patch, the libpfm4 example task_smpl now reports
correct counts (shown on 2.4GHz Core 2):
$ task_smpl -p 2400000000 -e unhalted_core_cycles:u,instructions_retired:u,baclears noploop 5
noploop for 5 seconds
IIP:0x000000004006d6 PID:5596 TID:5596 TIME:466,210,211,430 STREAM_ID:33 PERIOD:2,400,000,000 ENA=1,010,157,814 RUN=1,010,157,814 NR=3
2,400,000,254 unhalted_core_cycles:u (33)
2,399,273,744 instructions_retired:u (34)
53,340 baclears (35)
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4cc6e14b.1e07e30a.256e.5190@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The use of the JUMP_LABEL() construct ends up creating endless silly
wrappers, create a higher level construct to reduce this clutter.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Trades a call + conditional + ret for an unconditional jmp.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101014203625.501657727@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
hw_breakpoint creation needs to account stuff per-task to ensure there
is always sufficient hardware resources to back these things due to
ptrace.
With the perf per pmu context changes the event initialization no
longer has access to the event context, for the simple reason that we
need to first find the pmu (result of initialization) before we can
find the context.
This makes hw_breakpoints unhappy, because it can no longer do per
task accounting, cure this by frobbing a task pointer in the event::hw
bits for now...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101014203625.391543667@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.
Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.
The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.
Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce perf_pmu_name() helper function that returns the name of the
pmu. This gives us a generic way to get the name of a pmu regardless of
how an architecture identifies it internally.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
The number of counters for the registered pmu is needed in a few places
so provide a helper function that returns this number.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Revert the timer per cpu-context timers because of unfortunate
nohz interaction. Fixing that would have been somewhat ugly, so
go back to driving things from the regular tick. Provide a
jiffies interval feature for people who want slower rotations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20100917093009.519845633@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Aside from allowing software events into a !software group,
allow adding !software events to pure software groups.
Once we've moved the software group and attached the first
!software event, the group will no longer be a pure software
group and hence no longer be eligible for movement, at which
point the straight ctx comparison is correct again.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20100917093009.410784731@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The kernel perf event creation path shouldn't use find_task_by_vpid()
because a vpid exists in a specific namespace. find_task_by_vpid() uses
current's pid namespace which isn't always the correct namespace to use
for the vpid in all the places perf_event_create_kernel_counter() (and
thus find_get_context()) is called.
The goal is to clean up pid namespace handling and prevent bugs like:
https://bugzilla.kernel.org/show_bug.cgi?id=17281
Instead of using pids switch find_get_context() to use task struct
pointers directly. The syscall is responsible for resolving the pid to
a task struct. This moves the pid namespace resolution into the syscall
much like every other syscall that takes pid parameters.
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robin Green <greenrd@greenrd.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <a134e5e392ab0204961fd1a62c84a222bf5874a9.1284407763.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I missed a perf_event_ctxp user when converting it to an array. Pull this
last user into perf_event.c as well and fix it up.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since software events are always schedulable, mixing them up with
hardware events (who are not) can lead to funny scheduling oddities.
Giving them their own context solves this.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide the infrastructure for multiple task contexts.
A more flexible approach would have resulted in more pointer chases
in the scheduling hot-paths. This approach has the limitation of a
static number of task contexts.
Since I expect most external PMUs to be system wide, or at least node
wide (as per the intel uncore unit) they won't actually need a task
context.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Give each cpu-context its own timer so that it is a self contained
entity, this eases the way for per-pmu-per-cpu contexts as well as
provides the basic infrastructure to allow different rotation
times per pmu.
Things to look at:
- folding the tick and these TICK_NSEC timers
- separate task context rotation
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Separate the swevent hash-table from the cpu_context bits in
preparation for per pmu cpu contexts.
This keeps the swevent hash a global entity.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Neither the overcommit nor the reservation sysfs parameter were
actually working, remove them as they'll only get in the way.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use hw_perf_event::period_left instead of hw_perf_event::remaining
and win back 8 bytes.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide default implementations for the pmu txn methods, this
allows us to remove some conditional code.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since the current perf_disable() usage is only an optimization,
remove it for now. This eases the removal of the __weak
hw_perf_enable() interface.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Simple registration interface for struct pmu, this provides the
infrastructure for removing all the weak functions.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of hardcoding the number of contexts for the recursions
barriers, define a cpp constant to make the code more
self-explanatory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Now that software events don't have interrupt disabled anymore in
the event path, callchains can nest on any context. So seperating
nmi and others contexts in two buffers has become racy.
Fix this by providing one buffer per nesting level. Given the size
of the callchain entries (2040 bytes * 4), we now need to allocate
them dynamically.
v2: Fixed put_callchain_entry call after recursion.
Fix the type of the recursion, it must be an array.
v3: Use a manual pr cpu allocation (temporary solution until NMIs
can safely access vmalloc'ed memory).
Do a better separation between callchain reference tracking and
allocation. Make the "put" path lockless for non-release cases.
v4: Protect the callchain buffers with rcu.
v5: Do the cpu buffers allocations node affine.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Miller <davem@davemloft.net>
Cc: Borislav Petkov <bp@amd64.org>
- Most archs use one callchain buffer per cpu, except x86 that needs
to deal with NMIs. Provide a default perf_callchain_buffer()
implementation that x86 overrides.
- Centralize all the kernel/user regs handling and invoke new arch
handlers from there: perf_callchain_user() / perf_callchain_kernel()
That avoid all the user_mode(), current->mm checks and so...
- Invert some parameters in perf_callchain_*() helpers: entry to the
left, regs to the right, following the traditional (dst, src).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>
callchain_store() is the same on every archs, inline it in
perf_event.h and rename it to perf_callchain_store() to avoid
any collision.
This removes repetitive code.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug
sched: No need for bootmem special cases
sched: Revert nohz_ratelimit() for now
sched: Reduce update_group_power() calls
sched: Update rq->clock for nohz balanced cpus
sched: Fix spelling of sibling
sched, cpuset: Drop __cpuexit from cpu hotplug callbacks
sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check()
sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()
sched: thread_group_cputime: Simplify, document the "alive" check
sched: Remove the obsolete exit_state/signal hacks
sched: task_tick_rt: Remove the obsolete ->signal != NULL check
sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless
sched: Fix comments to make them DocBook happy
sched: Fix fix_small_capacity
powerpc: Exclude arch_sd_sibiling_asym_packing() on UP
powerpc: Enable asymmetric SMT scheduling on POWER7
sched: Add asymmetric group packing option for sibling domain
sched: Fix capacity calculations for SMT4
sched: Change nohz idle load balancing logic to push model
...
"struct regs" was set to argument of perf_arch_fetch_caller_regs
off-case. It should be "struct pt_regs".
This fixes various build errors in archs that have CONFIG_PERF_EVENTS=y
but no overriden implementation of perf_arch_fetch_caller_regs.
cc1: warnings being treated as errors
In file included from include/linux/ftrace_event.h:8,
from include/trace/syscall.h:6,
from include/linux/syscalls.h:75,
from arch/sh/kernel/sys_sh32.c:9:
include/linux/perf_event.h:937: error: 'struct regs' declared inside parameter list
include/linux/perf_event.h:937: error: its scope is only this definition or declaration, which is probably not what you want
include/linux/perf_event.h: In function 'perf_fetch_caller_regs':
include/linux/perf_event.h:952: error: passing argument 1 of 'perf_arch_fetch_caller_regs' from incompatible pointer type
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <AANLkTinKKFKEBQrZ3Hkj-XCaMwaTqulb-XnFzqEYiFRr@mail.gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Freeing a perf event can happen in several ways. A task
calls perf_event_exit_task() right before exiting. This helper
will detach all the events from the task context and queue their
removal through free_event() if they are child tasks. The task
also loses its context reference there.
Releasing the breakpoint slot from the constraint table is made
from free_event() that calls release_bp_slot(). We count the number
of breakpoints this task is running by looking at the task's
perf_event_ctxp and iterating through its attached events.
But at this time, the reference to this context has been cleaned up
already.
So looking at the event->ctx instead of task->perf_event_ctxp
to count the remaining breakpoints should solve the problem.
At least it would for child breakpoints, but not for parent ones.
If the parent exits before the child, it will remove all its
events from the context but free_event() will be called later,
on fd release time. And checking the number of breakpoints the
task has attached to its context at this time is unreliable as all
events have been removed from the context.
To solve this, we keep track of the list of per task breakpoints.
On top of it, we maintain our array of numbers of breakpoints used
by the tasks. We use the context address as a task id.
So, instead of looking at the number of events attached to a context,
we walk through our list of per task breakpoints and count the number
of breakpoints that use the same ctx than the one to be reserved or
released from the constraint table, and update the count on top of this
result.
In the meantime it solves a bad refcounting, it also solves a warning,
reported by Paul.
Badness at /home/paulus/kernel/perf/kernel/hw_breakpoint.c:114
NIP: c0000000000cb470 LR: c0000000000cb46c CTR: c00000000032d9b8
REGS: c000000118e7b570 TRAP: 0700 Not tainted (2.6.35-rc3-perf-00008-g76b0f13
)
MSR: 9000000000029032 <EE,ME,CE,IR,DR> CR: 44004424 XER: 000fffff
TASK = c0000001187dcad0[3143] 'perf' THREAD: c000000118e78000 CPU: 1
GPR00: c0000000000cb46c c000000118e7b7f0 c0000000009866a0 0000000000000020
GPR04: 0000000000000000 000000000000001d 0000000000000000 0000000000000001
GPR08: c0000000009bed68 c00000000086dff8 c000000000a5bf10 0000000000000001
GPR12: 0000000024004422 c00000000ffff200 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000018 00000000101150f4
GPR20: 0000000010206b40 0000000000000000 0000000000000000 00000000101150f4
GPR24: c0000001199090c0 0000000000000001 0000000000000000 0000000000000001
GPR28: 0000000000000000 0000000000000000 c0000000008ec290 0000000000000000
NIP [c0000000000cb470] .task_bp_pinned+0x5c/0x12c
LR [c0000000000cb46c] .task_bp_pinned+0x58/0x12c
Call Trace:
[c000000118e7b7f0] [c0000000000cb46c] .task_bp_pinned+0x58/0x12c (unreliable)
[c000000118e7b8a0] [c0000000000cb584] .toggle_bp_task_slot+0x44/0xe4
[c000000118e7b940] [c0000000000cb6c8] .toggle_bp_slot+0xa4/0x164
[c000000118e7b9f0] [c0000000000cbafc] .release_bp_slot+0x44/0x6c
[c000000118e7ba80] [c0000000000c4178] .bp_perf_event_destroy+0x10/0x24
[c000000118e7bb00] [c0000000000c4aec] .free_event+0x180/0x1bc
[c000000118e7bbc0] [c0000000000c54c4] .perf_event_release_kernel+0x14c/0x170
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
The local64.h include dependency was not dependent on PERF_EVENT=y,
which meant that arch's without atomic64_t support ended up including
it and failed to build.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Since now all modification to event->count (and ->prev_count
and ->period_left) are local to a cpu, change then to local64_t so we
avoid the LOCK'ed ops.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only child counters adding back their values into the parent counter
are responsible for cross-cpu updates to event->count.
So if we pull that out into a new child_count variable, we get an
event->count that is only modified locally.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently there are perf_buffer_alloc() + perf_buffer_init() + some
separate bits, fold it all into a single perf_buffer_alloc() and only
leave the attachment to the event separate.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clarify some of the transactional group scheduling API details
and change it so that a successfull ->commit_txn also closes
the transaction.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274803086.5882.1752.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the capacility to track data mmap()s. This can be used together
with PERF_SAMPLE_ADDR for data profiling.
Signed-off-by: Anton Blanchard <anton@samba.org>
[Updated code for stable perf ABI]
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274193049-25997-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Inline perf_swevent_put_recursion_context into perf_tp_event(), this
shrinks the per trace template code footprint and saves a function
call.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Drop this argument now that we always want to rewind only to the
state of the first caller.
It means frame pointers are not necessary anymore to reliably get
the source of an event. But this also means we need this helper
to be a macro now, as an inline function is not an option since
we need to know when to provide a default implentation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of hardcoding priority 10 and 20 in sched and perf, collect
them into CPU_PRI_* enums.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Group siblings don't pin each-other or the parent, so when we destroy
events we must make sure to clean up all cross referencing pointers.
In particular, for destruction of a group leader we must be able to
find all its siblings and remove their reference to it.
This means that detaching an event from its context must not detach it
from the group, otherwise we can end up failing to clear all pointers.
Solve this by clearly separating the attachment to a context and
attachment to a group, and keep the group composed until we destroy
the events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to move toward separate buffer objects, rework the whole
perf_mmap_data construct to be a more self-sufficient entity, one
with its own lifetime rules.
This greatly sanitizes the whole output redirection code, which
was riddled with bugs and races.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reduce code and data by using the knowledge that for
!PERF_USE_VMALLOC data_order is always 0.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.795019386@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reduce the clutter in perf_output_copy() by keeping
an interator in perf_output_handle.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.742809176@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
RO mmap()s don't update the tail pointer, so
comparing against it for determining the written data
size doesn't really do any good.
Keep track of when we last did a wakeup, and compare
against that.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.684479310@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid the swevent hash-table by using per-tracepoint
hlists.
Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since the x86 XCHG ins implies LOCK, avoid the use by
using a sequence count instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since there is now only a single writer, we can use
local_t instead and avoid all these pesky LOCK insn.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we can now assume there is only a single writer
to each buffer, we can remove per-cpu lock thingy and
use a simply nest-count to the same effect.
This removes the need to disable IRQs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 4fd38e4595.
It causes various crashes and hangs when events are activated.
The cause is not fully understood yet but we need to revert it
because the effects are severe.
Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add group scheduling transactional APIs to struct pmu.
These APIs will be implemented in arch code, based on Peter's idea as
below.
> the idea behind hw_perf_group_sched_in() is to not perform
> schedulability tests on each event in the group, but to add the group
> as a whole and then perform one test.
>
> Of course, when that test fails, you'll have to roll-back the whole
> group again.
>
> So start_txn (or a better name) would simply toggle a flag in the pmu
> implementation that will make pmu::enable() not perform the
> schedulablilty test.
>
> Then commit_txn() will perform the schedulability test (so note the
> method has to have a !void return value.
>
> This will allow us to use the regular
> kernel/perf_event.c::group_sched_in() and all the rollback code.
> Currently each hw_perf_group_sched_in() implementation duplicates all
> the rolllback code (with various bugs).
->start_txn:
Start group events scheduling transaction, set a flag to make
pmu::enable() not perform the schedulability test, it will be performed
at commit time.
->commit_txn:
Commit group events scheduling transaction, perform the group
schedulability as a whole
->cancel_txn:
Stop group events scheduling transaction, clear the flag so
pmu::enable() will perform the schedulability test.
Reviewed-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272002160.5707.60.camel@minggr.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename perf_event_attr::precise to perf_event_attr::precise_ip and
widen it to 2 bits. This new field describes the required precision of
the PERF_SAMPLE_IP field:
0 - SAMPLE_IP can have arbitrary skid
1 - SAMPLE_IP must have constant skid
2 - SAMPLE_IP requested to have 0 skid
3 - SAMPLE_IP must have 0 skid
And modify the Intel PEBS code accordingly. The PEBS implementation
now supports up to precise_ip == 2, where we perform the IP fixup.
Also s/PERF_RECORD_MISC_EXACT/&_IP/ to clarify its meaning, this bit
should be set for each PERF_SAMPLE_IP field known to match the actual
instruction triggering the event.
This new scheme allows for a PEBS mode that uses the buffer for more
than a single event.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Both Stephane and Corey reported that PERF_FORMAT_GROUP didn't work
as expected if the task the counters were attached to quit before
the read() call.
The cause is that we unconditionally destroy the grouping when we
remove counters from their context. Fix this by only doing this when
we free the counter itself.
Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1273160566.5605.404.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Below patch introduces perf_guest_info_callbacks and related
register/unregister functions. Add more PERF_RECORD_MISC_XXX bits
meaning guest kernel and guest user space.
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Each time a software event triggers, we need to walk through
the entire list of events from the current cpu and task contexts
to retrieve a running perf event that matches.
We also need to check a matching perf event is actually counting.
This walk is wasteful and makes the event fast path scaling
down with a growing number of events running on the same
contexts.
To solve this, we store the running perf events in a hashlist to
get an immediate access to them against their type:event_id when
they trigger.
v2: - Fix SWEVENT_HLIST_SIZE definition (and re-learn some basic
maths along the way)
- Only allocate hlist for online cpus, but keep track of the
refcount on offline possible cpus too, so that we allocate it
if needed when it becomes online.
- Drop the kref use as it's not adapted to our tricks anymore.
v3: - Fix bad refcount check (address instead of value). Thanks to
Eric Dumazet who spotted this.
- While exiting cpu, move the hlist release out of the IPI path
to lock the hlist mutex sanely.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Scheduler's task migration events don't work because they always
pass NULL regs perf_sw_event(). The event hence gets filtered
in perf_swevent_add().
Scheduler's context switches events use task_pt_regs() to get
the context when the event occured which is a wrong thing to
do as this won't give us the place in the kernel where we went
to sleep but the place where we left userspace. The result is
even more wrong if we switch from a kernel thread.
Use the hot regs snapshot for both events as they belong to the
non-interrupt/exception based events family. Unlike page faults
or so that provide the regs matching the exact origin of the event,
we need to save the current context.
This makes the task migration event working and fix the context
switch callchains and origin ip.
Example: perf record -a -e cs
Before:
10.91% ksoftirqd/0 0 [k] 0000000000000000
|
--- (nil)
perf_callchain
perf_prepare_sample
__perf_event_overflow
perf_swevent_overflow
perf_swevent_add
perf_swevent_ctx_event
do_perf_sw_event
__perf_sw_event
perf_event_task_sched_out
schedule
run_ksoftirqd
kthread
kernel_thread_helper
After:
23.77% hald-addon-stor [kernel.kallsyms] [k] schedule
|
--- schedule
|
|--60.00%-- schedule_timeout
| wait_for_common
| wait_for_completion
| blk_execute_rq
| scsi_execute
| scsi_execute_req
| sr_test_unit_ready
| |
| |--66.67%-- sr_media_change
| | media_changed
| | cdrom_media_changed
| | sr_block_media_changed
| | check_disk_change
| | cdrom_open
v2: Always build perf_arch_fetch_caller_regs() now that software
events need that too. They don't need it from modules, unlike trace
events, so we keep the EXPORT_SYMBOL in trace_event_perf.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Fix:
arch/powerpc/kernel/perf_event.c:1334: error: 'power_pmu_notifier' undeclared (first use in this function)
arch/powerpc/kernel/perf_event.c:1334: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/perf_event.c:1334: error: for each function it appears in.)
arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'power_pmu_notifier'
arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'register_cpu_notifier'
Due to commit 3f6da390 (perf: Rework and fix the arch CPU-hotplug hooks).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Events that trigger overflows by interrupting a context can
use get_irq_regs() or task_pt_regs() to retrieve the state
when the event triggered. But this is not the case for some
other class of events like trace events as tracepoints are
executed in the same context than the code that triggered
the event.
It means we need a different api to capture the regs there,
namely we need a hot snapshot to get the most important
informations for perf: the instruction pointer to get the
event origin, the frame pointer for the callchain, the code
segment for user_mode() tests (we always use __KERNEL_CS as
trace events always occur from the kernel) and the eflags
for further purposes.
v2: rename perf_save_regs to perf_fetch_caller_regs as per
Masami's suggestion.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Archs <linux-arch@vger.kernel.org>
Use the LBR to fix up the PEBS IP+1 issue.
As said, PEBS reports the next instruction, here we use the LBR to find
the last branch and from that construct the actual IP. If the IP matches
the LBR-TO, we use LBR-FROM, otherwise we use the LBR-TO address as the
beginning of the last basic block and decode forward.
Once we find a match to the current IP, we use the previous location.
This patch introduces a new ABI element: PERF_RECORD_MISC_EXACT, which
conveys that the reported IP (PERF_SAMPLE_IP) is the exact instruction
that caused the event (barring CPU errata).
The fixup can fail due to various reasons:
1) LBR contains invalid data (quite possible)
2) part of the basic block got paged out
3) the reported IP isn't part of the basic block (see 1)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.619375431@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement simple suport Intel Last-Branch-Record, it supports all
hardware that implements FREEZE_LBRS_ON_PMI, but does not (yet) implement
the LBR config register.
The Intel LBR is a FIFO of From,To addresses describing the last few
branches the hardware took.
This patch does not add perf interface to the LBR, but merely provides an
interface for internal use.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.544191154@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch implements support for Intel Precise Event Based Sampling,
which is an alternative counter mode in which the counter triggers a
hardware assist to collect information on events. The hardware assist
takes a trap like snapshot of a subset of the machine registers.
This data is written to the Intel Debug-Store, which can be programmed
with a data threshold at which to raise a PMI.
With the PEBS hardware assist being trap like, the reported IP is always
one instruction after the actual instruction that triggered the event.
This implements a simple PEBS model that always takes a single PEBS event
at a time. This is done so that the interaction with the rest of the
system is as expected (freq adjust, period randomization, lbr,
callchains, etc.).
It adds an ABI element: perf_event_attr::precise, which indicates that we
wish to use this (constrained, but precise) mode.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.392111285@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug
notifiers. This has the advantage of reducing the static weak interface
as well as exposing all hotplug actions to the PMU.
Use this to fix x86 hotplug usage where we did things in ONLINE which
should have been done in UP_PREPARE or STARTING.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100305154128.736225361@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes it easier to extend perf_sample_data and fixes a bug on arm
and sparc, which failed to set ->raw to NULL, which can cause crashes
when combined with PERF_SAMPLE_RAW.
It also optimizes PowerPC and tracepoint, because the struct
initialization is forced to zero out the whole structure.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jean Pihet <jpihet@mvista.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Jamie Iles <jamie.iles@picochip.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@kernel.org
LKML-Reference: <20100304140100.315416040@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ANY flag can show SMT data of another task (like 'top'),
so we want to disable it when system-wide profiling is
disabled.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove pointless union in the breakpoint field of hw_perf_event.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Since the cpu argument to hw_perf_group_sched_in() is always
smp_processor_id(), simplify the code a little by removing this argument
and using the current cpu where needed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1265890918.5396.3.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In certain situations, the kernel may need to stop and start the same
event rapidly. The current PMU callbacks do not distinguish between stop
and release (i.e., stop + free the resource). Thus, a counter may be
released, then it will be immediately re-acquired. Event scheduling will
again take place with no guarantee to assign the same counter. On some
processors, this may event yield to failure to assign the event back due
to competion between cores.
This patch is adding a new pair of callback to stop and restart a counter
without actually release the underlying counter resource. On stop, the
counter is stopped, its values saved and that's it. On start, the value
is reloaded and counter is restarted (on x86, actual restart is delayed
until perf_enable()).
Signed-off-by: Stephane Eranian <eranian@google.com>
[ added fallback to ->enable/->disable for all other PMUs
fixed x86_pmu_start() to call x86_pmu.enable()
merged __x86_pmu_disable into x86_pmu_stop() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4b703875.0a04d00a.7896.ffffb824@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We cannot assume that because hwc->idx == assign[i], we can avoid
reprogramming the counter in hw_perf_enable().
The event may have been scheduled out and another event may have been
programmed into this counter. Thus, we need a more robust way of
verifying if the counter still contains config/data related to an event.
This patch adds a generation number to each counter on each cpu. Using
this mechanism we can verify reliabilty whether the content of a counter
corresponds to an event.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4b66dc67.0b38560a.1635.ffffae18@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change 'bp_len' type to __u64 to make it work across archs as
the s390 architecture watch point length can be upto 2^64.
reference:
http://lkml.org/lkml/2010/1/25/212
This is an ABI change that is not backward compatible with
the previous hardware breakpoint info layout integrated in this
development cycle, a rebuilt of perf tools is necessary for
versions based on 2.6.33-rc1 - 2.6.33-rc6 to work with a
kernel based on this patch.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin <schwidefsky@de.ibm.com>
LKML-Reference: <20100130045518.GA20776@in.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
There was a bug in the old period code that caused intel_pmu_enable_all()
or native_write_msr_safe() to show up quite high in the profiles.
In staring at that code it made my head hurt, so I rewrote it in a
hopefully simpler fashion. Its now fully symetric between tick and
overflow driven adjustments and uses less data to boot.
The only complication is that it basically wants to do a u128 division.
The code approximates that in a rather simple truncate until it fits
fashion, taking care to balance the terms while truncating.
This version does not generate that sampling artefact.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The is_software_event() definition always confuses me because its an
exclusive expression, make it an inclusive one.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before scheduling an event group, we first check if a group can go
on. We first check if the group is made of software only events
first, in which case it is enough to know if the group can be
scheduled in.
For that purpose, we iterate through the whole group, which is
wasteful as we could do this check when we add/delete an event to
a group.
So we create a group_flags field in perf event that can host
characteristics from a group of events, starting with a first
PERF_GROUP_SOFTWARE flag that reduces the check on the fast path.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Split-up struct perf_event_context::group_list into pinned_groups
and flexible_groups (non-pinned).
This first appears to be useless as it duplicates various loops around
the group list handlings.
But it scales better in the fast-path in perf_sched_in(). We don't
anymore iterate twice through the entire list to separate pinned and
non-pinned scheduling. Instead we interate through two distinct lists.
The another desired effect is that it makes easier to define distinct
scheduling rules on both.
Changes in v2:
- Respectively rename pinned_grp_list and
volatile_grp_list into pinned_groups and flexible_groups as per
Ingo suggestion.
- Various cleanups
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Quoted from Ingo:
| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we only ever schedule the local cpu, there is no need to pass the
cpu number to the perf sched hooks.
This micro-optimizes things a bit.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (52 commits)
perf record: Use per-task-per-cpu events for inherited events
perf record: Properly synchronize child creation
perf events: Allow per-task-per-cpu counters
perf diff: Percent calcs should use double values
perf diff: Change the default sort order to "dso,symbol"
perf diff: Use perf_session__fprintf_hists just like 'perf record'
perf report: Fix cut'n'paste error recently introduced
perf session: Move perf report specific hits out of perf_session__fprintf_hists
perf tools: Move hist entries printing routines from perf report
perf report: Generalize perf_session__fprintf_hists()
perf symbols: Move symbol filtering to event__preprocess_sample()
perf symbols: Adopt the strlists for dso, comm
perf symbols: Make symbol_conf global
perf probe: Fix to show which probe point is not found
perf probe: Check symbols in symtab/kallsyms
perf probe: Check build-id of vmlinux
perf probe: Reject second attempt of adding same-name event
perf probe: Support event name for --add option
perf probe: Add glob matching support on --del
perf probe: Use strlist__for_each macros in probe-event.c
...
The miss-alignment of bp_addr created a 32bit hole, causing
different structure packings on 32 and 64 bit machines.
Fix that by moving __reserve_2 into that hole.
Further, remove the useless struct and redundant __bp_reserve
muck.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1260902591.8023.781.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Currently, when ptrace needs to modify a breakpoint, like disabling
it, changing its address, type or len, it calls
modify_user_hw_breakpoint(). This latter will perform the heavy and
racy task of unregistering the old breakpoint and registering a new
one.
This is racy as someone else might steal the reserved breakpoint
slot under us, which is undesired as the breakpoint is only
supposed to be modified, sometimes in the middle of a debugging
workflow. We don't want our slot to be stolen in the middle.
So instead of unregistering/registering the breakpoint, just
disable it while we modify its breakpoint fields and re-enable it
after if necessary.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260347148-5519-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
asm/hw_breakpoint.h is evidently a kernel internal file and
should not be included globally, not even under an #ifdef.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <200912071712.58650.arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As it is not used anymore and has been superseded by overflow_handler.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.
We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
This field might result from an older manual rebasing mistake.
We don't use it.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
It stands to anonymize a structure, but structures can already
anonymize by themselves.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Add two reserved fields for future extensions in the hardware
breakpoints interface. Further needs may arise.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Make perf_swevent_get_recursion_context return a context number
and disable preemption.
This could be used to remove the IRQ disable from the trace bit
and index the per-cpu buffer with.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091123103819.993226816@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we commit a trace to perf, we first check if we are
recursing in the same buffer so that we don't mess-up the buffer
with a recursing trace. But later on, we do the same check from
perf to avoid commit recursion. The recursion check is desired
early before we touch the buffer but we want to do this check
only once.
Then export the recursion protection from perf and use it from
the trace events before submitting a trace.
v2: Put appropriate Reported-by tag
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Properly account the full hierarchy of counters for both the
count (we already did so) and the scale times (new).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.153379276@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
in-kernel perf users might wish to have custom actions on the
sample interrupt.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212508.222339539@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/kprobes.c
kernel/trace/Makefile
Merge reason: hw-breakpoints perf integration is looking
good in testing and in reviews, plus conflicts
are mounting up - so merge & resolve.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The purpose of perf_output_{un,}lock() is to:
1) avoid publishing incomplete data
[ possible when publishing a head that is ahead of an entry
that is still being written ]
2) guarantee fwd progress
[ a simple refcount on pending writers doesn't need to drop to
0, making it so would end up implementing something like forced
quiecent states of RCU ]
To satisfy the above without undue complexity it serializes
between CPUs, this means that a pending writer can only be the
same cpu in a nested context, and since (under normal operation)
a cpu always makes progress we're good -- if the head is only
published when the bottom most writer completes.
Now we don't need to disable IRQs in order to serialize between
CPUs, disabling preemption ought to be sufficient, esp since we
already deal with nesting due to NMIs.
This avoids potentially expensive (and needless) local IRQ
disable/enable ops.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258373161.26714.254.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
u64 is invalid in userspace headers, including ioctl
definitions; use __u64 instead
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: <stable@kernel.org>
LKML-Reference: <20091113214733.7cd76be9@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch rebase the implementation of the breakpoints API on top of
perf events instances.
Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..
The new layering is now made as follows:
ptrace kgdb ftrace perf syscall
\ | / /
\ | / /
/
Core breakpoint API /
/
| /
| /
Breakpoints perf events
|
|
Breakpoints PMU ---- Debug Register constraints handling
(Part of core breakpoint API)
|
|
Hardware debug registers
Reasons of this rewrite:
- Use the centralized/optimized pmu registers scheduling,
implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
events, exclusive/non-exclusive, tunable period, etc...)
Impact:
- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
thread breakpoints references.
Todo (in the order):
- Support breakpoints perf counter events for perf tools (ie: implement
perf_bpcounter_event())
- Support from perf tools
Changes in v2:
- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
perf_event_attr.
- Separate core and arch specific headers, drop
asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch
Changes in v3:
- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
changes to kvm when we exit the guest and restore the bp registers
to the host.
Changes in v4:
- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
module
- Restore the breakpoints unconditionally on kvm guest exit:
TIF_DEBUG_THREAD doesn't anymore cover every cases of running
breakpoints and vcpu->arch.switch_db_regs might not always be
set when the guest used debug registers.
(Waiting for a reliable optimization)
Changes in v5:
- Split-up the asm-generic/hw-breakpoint.h moving to
linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
to host. We only want to restore the state if we have active
breakpoints to the host, otherwise we don't care about messed-up
address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c
Changes in v6:
- Fix wrong header inclusion in trace.h (triggered a build
error with CONFIG_FTRACE_SELFTEST
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Conflicts:
tools/perf/Makefile
Merge reason: Resolve the conflict, merge to upstream and merge in
perf fixes so we can add a dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A simple callback in a perf event can be used for multiple purposes.
For example it is useful for triggered based events like hardware
breakpoints that need a callback to dispatch a triggered breakpoint
event.
v2: Simplify a bit the callback attribution as suggested by Paul
Mackerras
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
There are reasons for kernel code to ask for, and use, performance
counters.
For example, in CPU freq governors this tends to be a good idea, but
there are other examples possible as well of course.
This patch adds the needed bits to do enable this functionality; they
have been tested in an experimental cpufreq driver that I'm working on,
and the changes are all that I needed to access counters properly.
[fweisbec@gmail.com: added pid to perf_event_create_kernel_counter so
that we can profile a particular task too
TODO: Have a better error reporting, don't just return NULL in fail
case.]
v2: Remove the wrong comment about the fact
perf_event_create_kernel_counter must be called from a kernel
thread.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Avi Kivity <avi@redhat.com>
LKML-Reference: <20090925122556.2f8bd939@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add two more software events that are common to many cpus.
Alignment faults: When a load or store is not aligned properly.
Emulation faults: When an instruction is emulated in software.
Both cause a very significant slowdown (100x or worse), so identifying and
fixing them is very important.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Make the hrtimer based events work for sysprof.
Whenever a swevent is scheduled out, the hrtimer is canceled.
When it is scheduled back in, the timer is restarted. This
happens every scheduler tick, which means the timer never
expired because it was getting repeatedly restarted over and
over with the same period.
To fix that, save the remaining time when disabling; when
reenabling, use that saved time as the period instead of the
user-specified sampling period.
Also, move the starting and stopping of the hrtimers to helper
functions instead of duplicating the code.
Signed-off-by: Søren Sandmann Pedersen <sandmann@redhat.com>
LKML-Reference: <ye8vdi7mluz.fsf@camel16.daimi.au.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Add an ioctl to allocate a filter for a perf event.
- Free the filter when the associated perf event is to be freed.
- Do the filtering in perf_swevent_match().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.
These architectures typically have to use vmalloc_user() for this.
However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PERF_EVENT_FORK always outputs the time field, so update the header
to reflect this.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090922123424.GD19453@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- provide compatibility Kconfig entry for existing PERF_COUNTERS .config's
- provide courtesy copy of old perf_counter.h, for user-space projects
- small indentation fixups
- fix up MAINTAINERS
- fix small x86 printout fallout
- fix up small PowerPC comment fallout (use 'counter' as in register)
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jiri Olsa