For the JR3/PCI cards, the size of the PCIBAR0 region depends on the
number of channels. Don't try and ioremap space for 4 channels if the
card has fewer channels. Also check for ioremap failure.
Thanks to Anders Blomdell for input and Sami Hussein for testing.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The flag COMEDI_CB_BLOCK was marked as "depricated in the header file".
However, this flag is important to wake up the data-reader (and writer)
after new data has arrived from(for) the DAQ card.
Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jan-Matthias Braun spotted a bug which locks up the driver when the
comedi ring buffer runs empty and provided a patch. The driver would
still send the data to comedi but the reader won't wake up any more.
What's required is setting the flag COMEDI_CB_BLOCK after new data has
arrived which wakes up the reader and therefore the read() command.
Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (235 commits)
Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed
Staging: IIO: Add tsl2560-2 support to tsl2563 driver.
Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563.
Staging: wlags49_h2: fix up signal levels
+ drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm tree
Staging: samsung-laptop: add TODO file
Staging: samsung-laptop: remove old kernel code
Staging: add Samsung Laptop driver
staging: batman-adv meshing protocol
Staging: rtl8192u: depends on USB
Staging: rtl8192u: remove dead code
Staging: rtl8192u: remove bad whitespaces
Staging: rtl8192u: make it compile
Staging: Added Realtek rtl8192u driver to staging
Staging: dream: add gpio and pmem support
Staging: dream: add TODO file
Staging: android: delete android drivers
Staging: et131x: clean up the avail fields in the rx registers
Staging: et131x: Clean up number fields
Staging: et131x: kill RX_DMA_MAX_PKT_TIME
...
The COMEDI_CMDTEST ioctl needs to clear unsupported bits in the
struct comedi_cmd's convert_src and other *_src members. This
needs fixing in the pcl816 driver's AI cmdtest.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The i8253_cascade_ns_to_timer_2div() function (and
i8253_cascade_ns_to_timer macro) checks the old values *d1 and *d2
for correctness as a heuristic before calculating new values. Don't
call the function with uninitialized values in *d1 and *d2.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
512 bytes of stack can be saved in serial_2002_open() by modifying
'struct config_t'. A short int suffices for the 'kind' and 'bits'
members. (Actually, a char would suffice, but wouldn't save any more
stack than a short int.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've fixed a bug in the USBDUX driver which caused timeouts while
sending commands to the boards. This was mainly because of one bulk
transfer which had a timeout of 1ms (!). I've now set all timeouts to
1000ms.
From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
add KERN_ facility to printk (mostly KERN_INFO, some KERN_WARNING)
I think I found a bug - commented on it but didn't change as it's just
in a printk (off by 1 error in output)
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No code changes - left some 80 char violations alone as
folding those lines would have made code less readable
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
no code changes, just fixing white space, line length, etc
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Style cleanup in staging based on Greg's tutorial / checkpatch
Fix 80 char line length (where useful) - includes two changes to code
to make it more logical / readable
Remove {} around single line blocks
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all warnings as issued by checkpatch.pl.
Note that I had to modify some of the logging messages to make that possible.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all warnings as issued by checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The variables are unsigned so the test `>= 0' is always true,
In these cases the other part of the test catch wrapped values.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add KERN_ to printk statements to reduce the number of warnings
shown by checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove braces in if statements to make the file exhibit less warnings
when checked using checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All new kernels have support for compat_ioctl so remove the check and support
for older kernels.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All new kernels have unlocked_ioctl so we don't need to check.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
something-bility is spelled as something-blity so a grep for 'blit'
would find these lines
this is so trivial that I didn't split it by subsystem / copy additional
maintainers - all changes are to comments The only purpose is to get
fewer false positives when grepping around the kernel sources.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the printk's in this driver.
Signed-off-by: Bruce Jones <brucej@linux.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up formatting of a struct initializer, as per the
standard conventions.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix improper use of printks in this driver. Most are
debug messages under a DEBUG #ifdef, a few are info/warnings
that should get logged for driver error conditions.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn spaces into tabs to keep scripts/checkpatch.pl happy. The
actual changes here are in a comment, so the script is just
being silly.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix improper use of braces in drivers/staging/comedi/drivers/ni_atmio16d.c
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Correct formatting errors - in this case line length and spaces before
parens.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The line was too long, used braces on single line for loop body.
Signed-off-by: Allison Randal <allison@parrot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott