Commit Graph

125 Commits

Author SHA1 Message Date
Matt Ranostay f8d9d3b434 iio: convert to common i2c_check_functionality() return value
Previously most drivers that used a i2c_check_functionality() check
condition required various error codes on failure. This patchset
converts to a standard of -EOPNOTSUPP

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-27 17:17:43 +00:00
Matt Ranostay 33da559f86 iio: imu: mpu6050: add mpu6500 register settings
Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-25 19:54:27 +00:00
Matt Ranostay d509844714 iio: imu: mpu6050: add calibration offset support
Allow setting of the x/y/z axes calibration offsets for the gyroscope
and accelerometer.

Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-25 19:53:30 +00:00
Matt Ranostay 725f645d87 iio: imu: mpu6050: add missing docstring for int_pin_cfg
Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-25 19:48:57 +00:00
Matt Ranostay 8f356be3fe iio: imu: mpu6050: fix INV_MPU6050_REG_UP_TIME delay
replace msleep(INV_MPU6050_REG_UP_TIME) with usleep_range calls
due to fact the wait time is under 20 milliseconds.

Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-25 19:48:47 +00:00
Matt Ranostay 115f0341bc iio: imu: mpu6050: use inv_mpu6050_sensor_show return code
Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-25 19:48:30 +00:00
Matt Ranostay 3afdf6cf9d iio: imu: mpu6050: remove trailing whitespaces
removed several trailing whitespaces before assignment operations

Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:48 +00:00
Daniel Baluta fc0dccdda1 iio: imu: inv_mpu6050: Fix alignment with open parenthesis
This makes code consistent around inv_mpu6050 driver and
fixes the following checkpatch.pl warning:
CHECK: Alignment should match open parenthesis

Note that there were few cases were it was not possible to
fix this due to making the line too long, but we can live with that.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:45 +00:00
Daniel Baluta 371a76603c iio: imu: inv_mpu6050: Fix code indent for if statement
This fixes the following checkpatch.pl warning:

WARNING: suspect code indent for conditional statements (8, 24)
+       if (kfifo_len(&st->timestamps) >
[...]
+                       goto flush_fifo;

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:44 +00:00
Daniel Baluta aeeb18fcf6 iio: imu: inv_mpu6050: Delete space before comma
This fixes the following checkpatch.pl warning:

ERROR: space prohibited before that ',' (ctx:WxE)
		.shift = 0 ,

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:44 +00:00
Daniel Baluta 0e79137531 iio: imu: inv_mpu6050: Remove unnecessary parentheses
Fixes the following checkpatch warning:
CHECK: Unnecessary parentheses around cpm->package.elements[i]

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:43 +00:00
Daniel Baluta d92241a0dc iio: imu: inv_mpu6050: Fix newlines to make code easier to read
This fixes the following checkpatch.pl warnings:
	* WARNING: Missing a blank line after declarations
	* CHECK: Blank lines aren't necessary before a close brace '}'

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:43 +00:00
Daniel Baluta acf7146ec9 iio: imu: inv_mpu6050: Fix Yoda conditions
This fixes the following checkpatch warning:
	* WARNING: Comparisons should place the constant
	  on the right side of the test

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:42 +00:00
Daniel Baluta 23c5edccbf iio: imu: inv_mpu6050: Fix multiline comments style
The preffered style for long (multi-line) comments is:

/*
 * this is a multiline
 * comment
 */

This also fixes checkpatch.pl warning:
WARNING: Block comments use * on subsequent lines

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:41 +00:00
Adriana Reus fd64df16f4 iio: imu: inv_mpu6050: Add SPI support for MPU6000
The only difference between the MPU6000 and the
MPU6050 is that the first also supports SPI.
Add SPI driver for this chip.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-13 20:54:07 +00:00
Adriana Reus b3eea8dacf iio: imu: inv_mpu6050: Separate driver into core and i2c functionality.
Separate this driver into core and i2c functionality.
This is in preparation for adding spi support.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-13 20:54:00 +00:00
Adriana Reus d430f3c36c iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions
Use regmap instead of i2c specific functions.
This is in preparation of splitting this driver into core and
i2c specific functionality.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-13 20:53:50 +00:00
Adriana Reus c278ac0ecd iio: imu: inv-mpu6050: Fix interrupt pin configuration
The select/deselect_bypass duo writes the irq number into the interrupt
configuration register.
If there is a i2c slave device connected to the mpu (eg. a magnetometer)
then this can hinder interrupt delivery for the accelerometer and
gyroscope.
Set this register to the default configuration.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-13 20:52:47 +00:00
Greg Kroah-Hartman fec2f3335c First round of new IIO device support, features and cleanups for the 4.6 cycle.
Device Support
 * ad5761
   - new driver
 * at91_sama5d2 ADC.
   - new driver and MAINTAINERS entry.
   - minor cleanups followed.
 * atlas pH-SM
   - new driver (this has possibly the prettiest data sheet I've ever seen)
 * mcp3422
   - mcp3425 ADC added.
 * mcp4725
   - mcp4726 DAC added.
 * mma8452
   - mma8451q accelerometer added.
 * mpl115
   - mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
     previous parts were i2c).
 * si7005
   - Hoperf th02 (seems to be a repackaged part)
 * si7020
   - Hoperf th06 (seems to be a repackaged part)
 
 New features
 * Core
   - IIO_PH type. Does what it says on the tin.
 * max30100
   - LED current configuration support.
 * mcp320x
   - more differential measurement combinations.
 * mma8452
   - free fall deteciton
 - opt3001
   - enable operation without a IRQ line.
   - device tree docs.  Somehow the original docs have disappeared down
     a rabbit hole, so here is a new set.
 * st-sensors
   - Support active-low interrupts.
 
 Cleanups and minor / not so minor reworks
 * Documentation
   - drop some defunct ABI from the docs in staging.
 * presure / Kconfig
   - white space cleanup.
 * ad7150
   - BIT macro usage
   - Alignment fixes
 * ad7192
   - false indent fixed.
 * ak8975
   - constify the ak_def structures
 * axp288
   - drop a redundant double const.
 * dht11
   - substantial reliability improvements by being more tolerant
     of missing start bits.
   - simplify the decoding algorithm
 * mma8452
   - whitespace cleanup
 * mpl115
   - don't bother setting i2c_client_data as nothing uses it.
 * mpu6050
   - drop unused function parameter.
 * opt3001
   - extract integration time as constants.
   - trivial refactoring.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWr8HEAAoJEFSFNJnE9BaIIWMP/A6hJdAi3QOipB75QYBHL3R2
 7fe7Bcd83i2to/Ohk9XirRwyP7kCqt1ZP7cnaIAevNxmwQ9fqIFgrxCK8BfF+lMk
 60PXfEdinPk1rWguqEMwaYq1xVAOTgWYl8F4GVG3nGIvTHovAYaZW0UcTUl5Gz+l
 WErEZQ5xgnf7e/29ds74eD3YaOti8E1mzhBLXFJH7lllsSMJttbp9Xb5J0QJrv4a
 Ly8Ru5DBRGZYKi0VplFIjncKLZgX/VUUSPNL+NXtPnGD2Qp2zx0bJ3eIqNmeEYZl
 isAGIc6l4XPXQLczyRaPbcQLobMxOHMP2uuXxY/OAbe2DX9/6ILcB2QigARAFHf2
 7vVcx3JlxXUtwS/bPpZSd5hHrvjWLR7+gyuZTA4b/scV4+GvknMl8e6IIh4Ux3/T
 d24V37bOIENrXCoyf81veap0xca6xQNSzCVuo8+1+QYqn6DxvoJw3p38Cmxb8eB8
 7M+nQJP9SwLtbSUak8g1KVrtWBNsMrMGwoiuZq5SkK1PQTSXnSaJPTL0OoPoefNi
 uIY5qD5FrUp9jlNbBP2M2E3CcG5CJcMElxyBgd7F5lEVxSWPOuyOcpJHIoCCCgIf
 o6vwOYXXfD4ytv/E6jg+Bbv3ZYCylFhcoZOqPgTC/sOnSI9RwhJ6XdAg6VU8sv07
 piH1AVWb91HKRN2dt2ZB
 =fgTH
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new IIO device support, features and cleanups for the 4.6 cycle.

Device Support
* ad5761
  - new driver
* at91_sama5d2 ADC.
  - new driver and MAINTAINERS entry.
  - minor cleanups followed.
* atlas pH-SM
  - new driver (this has possibly the prettiest data sheet I've ever seen)
* mcp3422
  - mcp3425 ADC added.
* mcp4725
  - mcp4726 DAC added.
* mma8452
  - mma8451q accelerometer added.
* mpl115
  - mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
    previous parts were i2c).
* si7005
  - Hoperf th02 (seems to be a repackaged part)
* si7020
  - Hoperf th06 (seems to be a repackaged part)

New features
* Core
  - IIO_PH type. Does what it says on the tin.
* max30100
  - LED current configuration support.
* mcp320x
  - more differential measurement combinations.
* mma8452
  - free fall deteciton
- opt3001
  - enable operation without a IRQ line.
  - device tree docs.  Somehow the original docs have disappeared down
    a rabbit hole, so here is a new set.
* st-sensors
  - Support active-low interrupts.

Cleanups and minor / not so minor reworks
* Documentation
  - drop some defunct ABI from the docs in staging.
* presure / Kconfig
  - white space cleanup.
* ad7150
  - BIT macro usage
  - Alignment fixes
* ad7192
  - false indent fixed.
* ak8975
  - constify the ak_def structures
* axp288
  - drop a redundant double const.
* dht11
  - substantial reliability improvements by being more tolerant
    of missing start bits.
  - simplify the decoding algorithm
* mma8452
  - whitespace cleanup
* mpl115
  - don't bother setting i2c_client_data as nothing uses it.
* mpu6050
  - drop unused function parameter.
* opt3001
  - extract integration time as constants.
  - trivial refactoring.
2016-02-01 13:10:03 -08:00
Linus Torvalds 8c4e378e42 Staging fixes for 4.5-rc2
Here are some small staging driver fixes for 4.5-rc2.  One of them
 predated 4.4-final, but I missed that merge window due to the holliday.
 The others fix reported issues that have come up recently.  The tty
 change is needed for the speakup driver fix and has the ack of the tty
 driver maintainer as well, i.e. myself :)
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlauWLoACgkQMUfUDdst+ynHbQCfWlGgQhtadfhtiaIKLwqy9NPG
 PksAn3/z4mXX037sfm2kZrcqtcNlv9zf
 =Vdai
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging fixes from Greg KH:
 "Here are some small staging driver fixes for 4.5-rc2.

  One of them predated 4.4-final, but I missed that merge window due to
  the holliday.  The others fix reported issues that have come up
  recently.  The tty change is needed for the speakup driver fix and has
  the ack of the tty driver maintainer as well, i.e.  myself :)

  All have been in linux-next with no reported issues"

* tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: fix read scrolled-back VT
  Staging: speakup: Fix getting port information
  Revert "Staging: panel: usleep_range is preferred over udelay"
  iio: adis_buffer: Fix out-of-bounds memory access
2016-01-31 17:00:27 -08:00
Adriana Reus c2472d0bbc iio: inv_mpu6050: Remove unused parameter
The inv_check_and_setup_chip function does not use the i2c_device_id
parameter. Therefore remove it.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 17:17:37 +00:00
Lars-Peter Clausen d590faf9e8 iio: adis_buffer: Fix out-of-bounds memory access
The SPI tx and rx buffers are both supposed to be scan_bytes amount of
bytes large and a common allocation is used to allocate both buffers. This
puts the beginning of the tx buffer scan_bytes bytes after the rx buffer.
The initialization of the tx buffer pointer is done adding scan_bytes to
the beginning of the rx buffer, but since the rx buffer is of type __be16
this will actually add two times as much and the tx buffer ends up pointing
after the allocated buffer.

Fix this by using scan_count, which is scan_bytes / 2, instead of
scan_bytes when initializing the tx buffer pointer.

Fixes: aacff892cb ("staging:iio:adis: Preallocate transfer message")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 17:32:04 +00:00
Greg Kroah-Hartman f3cf3fb7ec First set of new device support, features and cleanups for IIO in the 4.5 cycle
Usual mixed bag, but the big item perhaps in this series is the DMA buffer
 support added by Lars-Peter Clausen. It's been in the works for a long time
 and it will be interesting to see what hardware support shows up now that
 this is available.
 
 New core features + associate cleanup.
 * Add generic DMA buffer infrastructure
 * Add a DMAengine framework based buffer
  Also associated minor changes.
    - Set the device buffer watermark based on the minimum watermark for all
      attached buffers rather than just the 'primary' one.
    - iio_buffer_init - only set the watermark default if one hasn't already
      been provided.  This allows simple support for devices with a fixed
      watermark.
    - read only attribute for watermark on fixed watermark devices.
    - add explicit buffer enable/disable callbacks to allow the buffer to
      do more than trivial actions when it is being turned on and off.
 * IIO_VAL_INT support in write_raw_get_fmt function.
 
 New device support
 * Freescale MMA7455/7456L accelerometers
 * Memsic MXC6255XC accelerometer
 * ST lis2dh12 accelerometer
 * TI ADS8688 ADC
 * TI Palamas (twl6035/7) gpadc
 
 New driver features
 * mma8452
   - support either of the available interrupt pins to cope with the case
     where board layout has lead to a particular one being connected.
 
 Staging graduation
 * Dummy driver
   - this driver acts as both an example and a test device for those with
     out hardware to develop userspace code against.
 
 Cleanups and minor bits and bobs.
 * treewide
   - Sort out the ordering of iio_device_register/unregister vs runtime
     pm function calls so that it's all nice and consistent and not race
     prone.
   - Check sscanf return values.  None of the cases will actually happen as
     the strings are supplied internally, but best to be consistent on this.
 * ad7780
   - switch over to the gpio descriptor interface and remove the now unused
     platform data which gets rid of a header entirely.
 * ad7793
   - drop a pointless else statement.
 * at91_adc
   - Swap kmalloc_array in for a kmalloc doing the same job.
 * dummy
   - get rid of some commented out lines that snuck in during the move of
     the driver.
 * lm3533-als
   - Print an error message on provision of an invalid resistance.
 * mcp320x
   - Add compatible strings with vendor prefix and deprecate those with
     no vendor prefix.
 * mxs-lradc
   - Use BIT macro in various places rather than shifted ones.
 * pa12203001
   - Power off the chip if the registration fails.
 * pulsedlight-lidar-lite
   - add runtime PM support.
 * xilinx XADC
   - constify an iio_buffer_setup_ops structure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWUcmhAAoJEFSFNJnE9BaIyjYP/0A+CZMUqIGbYG9qFxnq7yYZ
 977Wt/gGI8+Jq5RwNw6gTfhp2GrCN+5gzDbE2mBEn94c6SKBrj2Q9trW1FQ+Nhfx
 9bZoyq3ZPRCV+efEDGfeK/JWRwv+V6IWwAF2J/iCPWpRMTEsIW5kM1JSO3ISlnma
 diyil1hefGTJY8aCqGApthfX4fyZK98oCV6zojxpCZfFPdsa+vf5n1RQ143odnOk
 6NSfXHYLI+2e+mJ1lw4GdpZdF+rF+7jWsUYC5EDNmvlIJYiKmm13whSQeWO0NHo8
 oD0pYboSIWnmdXx4s3RbWF2+Y28O1+oJDKZfXabB8DjVwtvlGnmWBRhgKji2e6E6
 Hhct83YbDWtEpbNkXcWpnc5v5ynmAMTYTxADhinTGUtVQh3Q4wWduuoHK6IyeI4s
 dbfpO2Wh6N/5k3a4UoA69IcI2DzPzb2sIFWpdS8wuNv5xDhV2OmmY2PjTfq2w+Qz
 hEoMCNDUG6rQAYf4auXK5JjhI4CaG/mz/qjIibTUqGODYECzQQyvq+c2Gdq0S8O/
 CUHOgui6aHbyuhWmXlEzhhkjuvBQZYaTxCA+LGMzy8w7UY9m4n5L/fX9M9IfFsMH
 NFCPrUfmxKPQj/mHlhu7KHaTMUlQ0pTqV5flSwqsjstZ2QddvI5EAKiLwIEhg7/2
 RpnOZoiFIxykduEYLxeh
 =CfCl
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.5 cycle

Usual mixed bag, but the big item perhaps in this series is the DMA buffer
support added by Lars-Peter Clausen. It's been in the works for a long time
and it will be interesting to see what hardware support shows up now that
this is available.

New core features + associate cleanup.
* Add generic DMA buffer infrastructure
* Add a DMAengine framework based buffer
 Also associated minor changes.
   - Set the device buffer watermark based on the minimum watermark for all
     attached buffers rather than just the 'primary' one.
   - iio_buffer_init - only set the watermark default if one hasn't already
     been provided.  This allows simple support for devices with a fixed
     watermark.
   - read only attribute for watermark on fixed watermark devices.
   - add explicit buffer enable/disable callbacks to allow the buffer to
     do more than trivial actions when it is being turned on and off.
* IIO_VAL_INT support in write_raw_get_fmt function.

New device support
* Freescale MMA7455/7456L accelerometers
* Memsic MXC6255XC accelerometer
* ST lis2dh12 accelerometer
* TI ADS8688 ADC
* TI Palamas (twl6035/7) gpadc

New driver features
* mma8452
  - support either of the available interrupt pins to cope with the case
    where board layout has lead to a particular one being connected.

Staging graduation
* Dummy driver
  - this driver acts as both an example and a test device for those with
    out hardware to develop userspace code against.

Cleanups and minor bits and bobs.
* treewide
  - Sort out the ordering of iio_device_register/unregister vs runtime
    pm function calls so that it's all nice and consistent and not race
    prone.
  - Check sscanf return values.  None of the cases will actually happen as
    the strings are supplied internally, but best to be consistent on this.
* ad7780
  - switch over to the gpio descriptor interface and remove the now unused
    platform data which gets rid of a header entirely.
* ad7793
  - drop a pointless else statement.
* at91_adc
  - Swap kmalloc_array in for a kmalloc doing the same job.
* dummy
  - get rid of some commented out lines that snuck in during the move of
    the driver.
* lm3533-als
  - Print an error message on provision of an invalid resistance.
* mcp320x
  - Add compatible strings with vendor prefix and deprecate those with
    no vendor prefix.
* mxs-lradc
  - Use BIT macro in various places rather than shifted ones.
* pa12203001
  - Power off the chip if the registration fails.
* pulsedlight-lidar-lite
  - add runtime PM support.
* xilinx XADC
  - constify an iio_buffer_setup_ops structure.
2015-12-01 09:13:29 -08:00
Ioana Ciornei 72a868b38b iio: imu: check sscanf return value
This patch fixes the following checkpatch warning:
WARNING: unchecked sscanf return value

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-08 15:44:10 +00:00
Adriana Reus 7d0ead5c3f iio: Reconcile operation order between iio_register/unregister and pm functions
At probe, runtime pm should be setup before registering the sysfs interface so
that all the power attributes are accurate and functional when registering.
Also, when removing the device we should unregister first to make sure
that the interfaces that may result in wakeups are no longer available.

Fix this behaviour for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553, rpr0521.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-08 15:36:53 +00:00
Linus Torvalds 75f5db39ff spi: Updates for v4.4
Quite a lot of activity in SPI this cycle, almost all of it in drivers
 with a few minor improvements and tweaks in the core.
 
  - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
  - Support for big endian in the bcm63xx driver.
  - Multiple slave support for the mt8173
  - New driver for the auxiliary SPI controller in bcm2835 SoCs.
  - Support for Layerscale SoCs in the Freescale DSPI driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWOehzAAoJECTWi3JdVIfQTPYH+wYMDG8gAIw2s0AJ4DvVe4qZ
 sOAm1UgUJZxssrEA6BNqbfM0dfRo+oQJKmRd0Dc5n7LEMsYHdI/5yKHk8PCS6ZzD
 iQyQCzbd0thDAqwuPaMP62cyPDHwyJX22VGTsgVnj6AZqAQ+9+g4SPKhFnm1Mlm4
 hmDi6fdSrsqo8k8gkpVN8RFOfVsjAV1dLtAauQRWDHrqMxXURSrKG76eqAqUa5bn
 BLPXBoj5PA0DMLPO2j+ADZwWN723LrI2mSSlc+ThjEX/OIt2OhAoiOTV5RPqaafy
 TIsCkh68q/gYAsL5HtvvmgZByl41FLYiO0Z+rXmWUyMMbnvhZTLws9S2BNpBLuk=
 =DgXG
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite a lot of activity in SPI this cycle, almost all of it in drivers
  with a few minor improvements and tweaks in the core.

   - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
   - Support for big endian in the bcm63xx driver.
   - Multiple slave support for the mt8173
   - New driver for the auxiliary SPI controller in bcm2835 SoCs.
   - Support for Layerscale SoCs in the Freescale DSPI driver"

* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
  spi: pxa2xx: Add support for Intel Broxton
  spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
  spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
  spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
  spi: Add DSPI support for layerscape family
  spi: ti-qspi: improve ->remove() callback
  spi/spi-xilinx: Fix race condition on last word read
  spi: Drop owner assignment from spi_drivers
  spi: Add THIS_MODULE to spi_driver in SPI core
  spi: Setup the master controller driver before setting the chipselect
  spi: dw: replace magic constant by DW_SPI_DR
  spi: mediatek: mt8173 spi multiple devices support
  spi: mediatek: handle controller_data in mtk_spi_setup
  spi: mediatek: remove mtk_spi_config
  spi: mediatek: Update document devicetree bindings to support multiple devices
  spi: fix kernel-doc warnings about missing return desc in spi.c
  spi: fix kernel-doc warnings about missing return desc in spi.h
  spi: pxa2xx: Align a few defines
  spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
  ...
2015-11-05 13:15:12 -08:00
Andrew F. Davis 3821a065f5 spi: Drop owner assignment from spi_drivers
An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 10:30:17 +09:00
Octavian Purdila 0f0796509c iio: remove gpio interrupt probing from drivers that use a single interrupt
Commit 845c877009 ("i2c / ACPI: Assign IRQ for devices that have
GpioInt automatically") automatically assigns the first ACPI GPIO
interrupt in client->irq, so we can remove the probing code from
drivers that use only one interrupt.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03 12:05:51 +01:00
Greg Kroah-Hartman 1c46ae0af6 Second set of new device support, features and cleanup for the 4.3 cycle.
Take 2 also includes a fix set that was too late for the 4.2 cycle.
 
 As we had a lot of tools and docs work in this set, I have broken those
 out into their own categories in this description.
 
 Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
 * Poll functions for both event chardev and the buffer one were returning
   negative error codes (via a positive value).
 * A recent change to lsiio adding some error handling that was wrong and
   stopped the tool working.
 * bmg160 was missing some dependencies in Kconfig
 * berlin2-adc had a misshandled register (wrote a value rather than a bitmap)
 
 New device support
 * TI opt3001 light sensor
 * TXC PA12 ALS and proximity sensor.
 * mcp3301 ADC support (in mcp320x driver)
 * ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
   common support to allow different WHOAMI register addresses, devices with
   fixed scale and allow interrupt equiped magnetometers).
 * ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
 * ADIS16266 gyro (in the adis16260 driver)
 * ADIS16137 gyro (in the adis16136 driver)
 
 New functionality
 * mmc35240 DT bindings.
 * Inverse unit conversion macros to aid handing of values written to sysfs
   attributes.
 
 Core cleanup
 * Forward declaration of struct iio_trigger to avoid a compile warning.
 
 Driver cleanup / fixes
 * mxs-lradc
   - Clarify which parts are supported.
   - Fix spelling erorrs.
   - Missing/extra includes
   - reorder includes
   - add datasheet name listings for all usable channels (to allow them
     to be bound by name from consumer drivers)
 * acpi-als - add some function prefixes as per general iio style.
 * bmc150_magn - replace a magic value with the existing define.
 * vf610 - determine possible sample frequencies taking into account the
   electrical characteristics (defining a minimum sample time)
 * dht11
   - whitespace
   - additional docs
   - avoid mulitple assignments in one line
   - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
     previously used for timing.
 * Fix all drivers that consider 0 a valid IRQ for historical reasons.
 * Export I2C module alias info where previously missing (to allow autoprobing)
 * Export OF module alias info where previously missing.
 * mmc35240 - switch some variables into arrays to improve readability.
 * mlx90614 - define some magic numbers for readability.
 * bmc150_magn
   - expand area locked by a mutex to cover all the use of the
     data->buffer.
   - use descriptive naming for a mask instead of a magic value.
 * berin2-adc
   - pass up an error code rather that a generic error
   - constify the iio_chan_spec
   - some other little tidy ups.
 * stk8312
   - fix a dependency on triggered buffers in kconfig
   - add a check for invalid attribute values
   - improve error handling by returning error codes where possible and
     return immediately where relevant
   - rework macro defs to use GENMASK etc
   - change some variable types to reduce unnecessary casting
   - clean up code style
   - drop a local buffer copy for bulk reads and use the one in data->buffer
      instead.
 * adis16400 - the adis16448 gyroscope scale was wrong.
 * adis16480 - some more wrong scales for various parts.
 * adis16300 - has an undocumented product id and serial number registers so
   use them.
 * iio_simple_dummy - fix some wrong code indentation.
 * bmc150-accel - use the chip ID to detect the chip present rather than
   verifying the expected part was there.  This was in response to a wrong
   ACPI entry on the WinBook TW100.
 * mma8452
   - fix _get_hp_filter_index
   - drop a double include
   - pass up an error code rather than rewriting it
   - range check input values to attribute writes
   - register defs tidy up using GENMASK and reordering them to be easier to
     follow.
   - various coding style cleanups
   - put the Kconfig entry in the write place (alphabetically).
 
 Tools related
 * Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
   use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
   them in the middle of normal output.
 * Fix tools to allow that scale and offset attributes are optional.
 * More tools fixes including allowing true 32bit data (previously an overflow
   prevented more than 31bits)
 * Drop a stray header guard that ended up in a c file.
 * Make calc_digits static as it isn't exported or in the header.
 * Set ci_array pointer to NULL after free as a protection against non safe
   usage of the tools core code.  Also convert a double pointer to a single
   one as the extra level of indirection was unnecessary.
 
 Docs
 * DocBook introduction by Daniel Baluta.  Glad we are beginning to
   draw together some more introductory docs to suplement the various
   tools / examples.
 * Drop bytes_per_datum sysfs attribute docs as it no longer exists.
 * A whole load of missing / fixing of kernel-doc for the core of IIO.
 * Document the trigger name sysfs attribute in the ABI docs.
 * Minor typos in the ABI docs related to power down modes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVy5EbAAoJEFSFNJnE9BaIyjEQAIXc+mjgdyMJEXLKlKKGCSY5
 EX7saX91IeSK5y0CWX0hd0VPewaj4ExG7PWo3gqUSm1L9zmusLcyJm8W2pev3CGE
 m7s40efxZJw0Jmmu18a3LCfcHUu/LWl4mHQtZy/AFGgWhZzWIyKA2XLqgc+Wu9qb
 sjzleSJ05etDksyA7JWFCrrwBnJlW4lD25o0nD0kt3Wry2wlbN2JvZ9QLmmoc0ex
 shvtI556Ew0FRywT9ir555EoJNAQQMW85Ft0dWFBnLwgc67nFTa4YNRXgoRlzhh/
 sRnGKzrs5SVc1c9sxiVS4utiazxy/irHgZ5FkvTTq7F+GXeIwPK9Xv/SXZTmvs5w
 lrSazRIjiLqWgpv/5oaOOGlikbpctI2kSXO0GbCW8th+l3KnKcKfComa3fnU7dca
 /lofp/JzpIfwM+Bnjl1nlNuEbT0mlfJySfhUSSu/kHJxOcvDfkK4vv3oSfFp5nbF
 rhA9vbVEfopXTGIOwWDjV4j0HtMCEHgOPN3T0kuyiYiWZUIjfJXchXG8e5h9/ncd
 ACjH3fg6FQtHzTtzqLQky/NVAKcnFrgJSokN25GXF7R95TxufYJ6RIfnenJiCd2n
 QCIdPam4bZh3/C2QYtiqWKY5e+zfkqs88/Er/HGgvxRUhKCbTvCcey1RY7FEDFHY
 +9nMx/Yts8L1ulUEMjsm
 =/b3G
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.3b-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for the 4.3 cycle.
Take 2 also includes a fix set that was too late for the 4.2 cycle.

As we had a lot of tools and docs work in this set, I have broken those
out into their own categories in this description.

Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
* Poll functions for both event chardev and the buffer one were returning
  negative error codes (via a positive value).
* A recent change to lsiio adding some error handling that was wrong and
  stopped the tool working.
* bmg160 was missing some dependencies in Kconfig
* berlin2-adc had a misshandled register (wrote a value rather than a bitmap)

New device support
* TI opt3001 light sensor
* TXC PA12 ALS and proximity sensor.
* mcp3301 ADC support (in mcp320x driver)
* ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
  common support to allow different WHOAMI register addresses, devices with
  fixed scale and allow interrupt equiped magnetometers).
* ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
* ADIS16266 gyro (in the adis16260 driver)
* ADIS16137 gyro (in the adis16136 driver)

New functionality
* mmc35240 DT bindings.
* Inverse unit conversion macros to aid handing of values written to sysfs
  attributes.

Core cleanup
* Forward declaration of struct iio_trigger to avoid a compile warning.

Driver cleanup / fixes
* mxs-lradc
  - Clarify which parts are supported.
  - Fix spelling erorrs.
  - Missing/extra includes
  - reorder includes
  - add datasheet name listings for all usable channels (to allow them
    to be bound by name from consumer drivers)
* acpi-als - add some function prefixes as per general iio style.
* bmc150_magn - replace a magic value with the existing define.
* vf610 - determine possible sample frequencies taking into account the
  electrical characteristics (defining a minimum sample time)
* dht11
  - whitespace
  - additional docs
  - avoid mulitple assignments in one line
  - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
    previously used for timing.
* Fix all drivers that consider 0 a valid IRQ for historical reasons.
* Export I2C module alias info where previously missing (to allow autoprobing)
* Export OF module alias info where previously missing.
* mmc35240 - switch some variables into arrays to improve readability.
* mlx90614 - define some magic numbers for readability.
* bmc150_magn
  - expand area locked by a mutex to cover all the use of the
    data->buffer.
  - use descriptive naming for a mask instead of a magic value.
* berin2-adc
  - pass up an error code rather that a generic error
  - constify the iio_chan_spec
  - some other little tidy ups.
* stk8312
  - fix a dependency on triggered buffers in kconfig
  - add a check for invalid attribute values
  - improve error handling by returning error codes where possible and
    return immediately where relevant
  - rework macro defs to use GENMASK etc
  - change some variable types to reduce unnecessary casting
  - clean up code style
  - drop a local buffer copy for bulk reads and use the one in data->buffer
     instead.
* adis16400 - the adis16448 gyroscope scale was wrong.
* adis16480 - some more wrong scales for various parts.
* adis16300 - has an undocumented product id and serial number registers so
  use them.
* iio_simple_dummy - fix some wrong code indentation.
* bmc150-accel - use the chip ID to detect the chip present rather than
  verifying the expected part was there.  This was in response to a wrong
  ACPI entry on the WinBook TW100.
* mma8452
  - fix _get_hp_filter_index
  - drop a double include
  - pass up an error code rather than rewriting it
  - range check input values to attribute writes
  - register defs tidy up using GENMASK and reordering them to be easier to
    follow.
  - various coding style cleanups
  - put the Kconfig entry in the write place (alphabetically).

Tools related
* Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
  use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
  them in the middle of normal output.
* Fix tools to allow that scale and offset attributes are optional.
* More tools fixes including allowing true 32bit data (previously an overflow
  prevented more than 31bits)
* Drop a stray header guard that ended up in a c file.
* Make calc_digits static as it isn't exported or in the header.
* Set ci_array pointer to NULL after free as a protection against non safe
  usage of the tools core code.  Also convert a double pointer to a single
  one as the extra level of indirection was unnecessary.

Docs
* DocBook introduction by Daniel Baluta.  Glad we are beginning to
  draw together some more introductory docs to suplement the various
  tools / examples.
* Drop bytes_per_datum sysfs attribute docs as it no longer exists.
* A whole load of missing / fixing of kernel-doc for the core of IIO.
* Document the trigger name sysfs attribute in the ABI docs.
* Minor typos in the ABI docs related to power down modes.
2015-08-12 12:43:41 -07:00
Lars-Peter Clausen 72d9c9869d iio: adis16400: Add ADIS16445 support
The ADIS16445 is similar to the ADIS16448, but without the magnetometer and
pressure channels as well as different scale factors for the gyroscope and
accelerometer outputs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 15:08:55 +01:00
Lars-Peter Clausen dc8615ce34 iio: adis16400: Add ADIS16367 support
The ADIS16367 is mostly register compatible to the ADIS16360. The only
difference is the scale factor for the gyroscope output.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:58:42 +01:00
Lars-Peter Clausen 3c38676079 iio: adis16400: Add ADIS16305 support
The ADIS16305 is fully register map compatible to the ADIS16300.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:54:20 +01:00
Lars-Peter Clausen bd95a89e7a iio: adis16400: adis16300 has product ID and serial number
The ADIS16300 has the product ID and serial number registers, they are just
not documented. Set the appropriate flags so the driver makes use of them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:53:26 +01:00
Lars-Peter Clausen 7abad1063d iio: adis16480: Fix scale factors
The different devices support by the adis16480 driver have slightly
different scales for the gyroscope and accelerometer channels.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:51:56 +01:00
Lars-Peter Clausen 8166537283 iio: adis16400: Fix adis16448 gyroscope scale
Use the correct scale for the adis16448 gyroscope output.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:48:43 +01:00
Octavian Purdila c176becd81 iio: fix drivers that consider 0 as a valid IRQ in client->irq
Since patch "i2c / ACPI: Use 0 to indicate that device does not have
interrupt assigned" [1], 0 is not a valid i2c client irq anymore, so
change all driver's checks accordingly.

The same issue occurs when the device is instantiated via device tree
with no IRQ, or from the i2c sysfs interface, even before the patch
above.

[1] http://lkml.kernel.org/g/<1430908148-201129-3-git-send-email-mika.westerberg@linux.intel.com>

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:23:11 +01:00
Greg Kroah-Hartman ed15e8880f Merge 4.2-rc3 into staging-next
We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-20 13:21:28 -07:00
Krzysztof Kozlowski 2155971a66 iio: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-11 18:50:07 +01:00
Adriana Reus a858c7dab4 iio: inv-mpu: Export scale_available attributes
Export the available scales for accel and gyro in order
to hint the user-space as to what are the available valid values.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-13 19:01:05 +01:00
Adriana Reus 6a3c45bb5a iio: inv-mpu: Specify the expected format/precision for write channels
The gyroscope needs IIO_VAL_INT_PLUS_NANO for the scale channel and
unless specified write returns MICRO by default.
This needs to be properly specified so that write operations into scale
have the expected behaviour.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-13 18:57:53 +01:00
Lars-Peter Clausen d046ba268a iio: adis16400: Fix burst transfer for adis16448
The adis16448, unlike the other chips in this family, in addition to the
hardware channels also sends out the DIAG_STAT register in burst mode
before them. Handle that case by skipping over the first 2 bytes before we
pass the received data to the buffer.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f ("iio:adis16400: Add support for the adis16448")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-16 11:01:20 +01:00
Paul Cercueil 9df560350c iio: adis16400: Fix burst mode
There are a few issues with the burst mode support. For one we don't setup
the rx buffer, so the buffer will never be filled and all samples will read
as the zero. Furthermore the tx buffer has the wrong type, which means the
driver sends the wrong command and not the right data is returned.

The final issue is that in burst mode all channels are transferred. Hence
the length of the transfer length should be the number of hardware
channels * 2 bytes. Currently the driver uses indio_dev->scan_bytes for
this. But if the timestamp channel is enabled the scan_bytes will be larger
than the burst length. Fix this by just calculating the burst length based
on the number of hardware channels.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3 ("staging:iio:adis16400: Preallocate transfer message")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-16 11:00:50 +01:00
Paul Cercueil c2a8b623a0 iio: adis16400: Compute the scan mask from channel indices
We unfortunately can't use ~0UL for the scan mask to indicate that the
only valid scan mask is all channels selected. The IIO core needs the exact
mask to work correctly and not a super-set of it. So calculate the masked
based on the channels that are available for a particular device.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3 ("staging:iio:adis16400: Preallocate transfer message")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-16 10:58:36 +01:00
Paul Cercueil 7323d59862 iio: adis16400: Use != channel indices for the two voltage channels
Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-16 10:57:07 +01:00
Lars-Peter Clausen 69ca2d771e iio: adis16400: Report pressure channel scale
Add the scale for the pressure channel, which is currently missing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f ("iio:adis16400: Add support for the adis16448")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-16 10:54:35 +01:00
Greg Kroah-Hartman c610f7f772 Merge 4.0-rc7 into staging-next
We want those fixes (iio primarily) into the -next branch to help with
merge and testing issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-07 11:03:02 +02:00
Darshana Padmadas 4ce7ca89d6 iio: imu: Use iio_trigger_get for indio_dev->trig assignment
This patch uses iio_trigger_get to increment the reference
count of trigger device, to avoid incorrect assignment.
Can result in a null pointer dereference during removal if the
trigger has been changed before removal.

This patch refers to a similar situation encountered through the
following discussion:
http://www.spinics.net/lists/linux-iio/msg13669.html

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 13:51:40 +00:00
Greg Kroah-Hartman dc5f2c5f6a First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle.
New drivers
 * CM3323 color sensor.
 * MS5611 pressure and temperature sensor.
 
 New functionality
 * mup6050 - create mux clients for devices described via ACPI. The reasoning
      and approach taken in this patch are complex.  Basically there is no
      otherway of finding out what is there than by some esoteric look ups in
      the ACPI data.
 * cm3232 - PM support
 * itg3200 - suspend/resume support
 * mcp320x - add more ADCs to the kconfig to reflect what the driver supports
      (this patch and the bindings got left behind when the support was added
       a while back).
 
 Docs / utils
 * ti-adc128s052 - DT bindings.
 * mcp3422 - DT bindings.
 * mcp320x - DT bindings
 * ABI docs for event threshold scale attributes, in_magn_offset, proximity
   scan_element and thresh falling/rising values for accelerometers.  All
   elements long in use that have slipped by being explicitly documented.
 * Tidy up the tools previously in drivers/staging/iio/Documentation and move
   them out to /tools/iio. Yet another move that should have happened long ago.
   This time Roberta Dobrescu did the leg work.  Thanks!
 
 Core Cleanups
 * Export userspace IIO headers.  We should have done the appropriate header
   splitting a long time ago. Thanks to Daniel for sorting this out.
 
 * Refactor the registring of attributes for buffers to move all non-custom
   ones to a vector allowing easier additions to the current set in the future.
 
 Driver Cleanups
 * gpiod related cleanups.  Make use of the additional parameter to specify
   	initial direciton to avoid extra code.
 * bmc150 - Various refactorings to reduce code repitition and prepare for
            hardware buffer support.  Some of these cleanups are good even
 	   without the new functionality.
 * kmx61 - direct use of index to an array avoiding a structure element which
           was always the index to an element in an array of that structure.
 * vf610 - avoid incorrect type for return from wait_for_completion_timeout.
 * gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
 * ade7754 - improve error handling including suppressing some build warnings.
 * ade7759 - improve error handling including suppressing some build warnings.
 * hmc5843 - Long line and indentation fixes. Also some constifying of various
       constant data.
 * ade7854 - 80+ character line splitting.
 * ad2s1210 - fix wrong printf format string.
 * mxs-lradc - fix wrong printf format string.
 * ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
 * periodic rtc trigger - make the frequency type an unsigned int as it
   is always treated as such.
 * jsa1212 - constify struct regmap_config as it is constant.
 * ad7793 - typo in the MODULE_DESCRIPTION
 * mma9551 - check gpiod_to_irq errors.  Note that this doesn't actually cause
     any trouble but is worth tidying up as obviously incorrect.
 * mlx90614 - refactor the register symbols to make it clear which reads are to
     RAM not PROM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVBe4zAAoJEFSFNJnE9BaISXAP+wcVdU9PyiLdpjh7D73qbbV0
 KnKJHdO+aKe4hCv6Xl0fWIbJcsxTn8ALPHkkxHnu06hd2Q9zANgdJ5dER5XB34fX
 vw+EjsIdiyCDmoOVGzP5SsmbSoO3gNoR5GdWmjKFKjr0eSxinh3AmAesTVSC2T9Y
 vHkjgDj3KaqN735brd2GneeG/s3jY8ZZaiTZ0jFotCtSmBAiPi8uYwIwMLmVpsVu
 M3tcUPWKithRoyKBmO4tiDg2Qwnj0IhN8zyIYiUBftxCIIY7tSlQkYgRzDmrxGG2
 HCITf33Ss87UH0IF1BOm5PXjQ3ClI3idtCwqCeXscAo6IXmoe/+BsXR/m2JqUTdp
 EOrORyzsHc0WkJK8dnp1h1XfiBR4UQpiwce5xGFbni2ycfNBw1/J0l7QTi45D6Z7
 SdGXTgt1AWd8MoWxcxMhWMPQlHsxK/XMPh10O5wD5icxo5EHvnPP0ObZ15Ax6T/V
 kcO+NEJCEHH2Q/kna2M6h4FdUVBxvzjjwhdZVs8PGGfJNDij2cVwspT81lKMauwf
 07S0KHEjhqbRSM0TvsMyf2li1Xwv5eu+G2FTkopESJ4a2zyaLobt/QgTu9dzg4Gh
 QDJFx4xdmNv4OQ+psZuoDznjM/EV+eQR+swH7P6UDyef0jghLwVkqHxM/HYChiyP
 OvZCCnHDB4EiC8jx+c43
 =BmiY
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle.

New drivers
* CM3323 color sensor.
* MS5611 pressure and temperature sensor.

New functionality
* mup6050 - create mux clients for devices described via ACPI. The reasoning
     and approach taken in this patch are complex.  Basically there is no
     otherway of finding out what is there than by some esoteric look ups in
     the ACPI data.
* cm3232 - PM support
* itg3200 - suspend/resume support
* mcp320x - add more ADCs to the kconfig to reflect what the driver supports
     (this patch and the bindings got left behind when the support was added
      a while back).

Docs / utils
* ti-adc128s052 - DT bindings.
* mcp3422 - DT bindings.
* mcp320x - DT bindings
* ABI docs for event threshold scale attributes, in_magn_offset, proximity
  scan_element and thresh falling/rising values for accelerometers.  All
  elements long in use that have slipped by being explicitly documented.
* Tidy up the tools previously in drivers/staging/iio/Documentation and move
  them out to /tools/iio. Yet another move that should have happened long ago.
  This time Roberta Dobrescu did the leg work.  Thanks!

Core Cleanups
* Export userspace IIO headers.  We should have done the appropriate header
  splitting a long time ago. Thanks to Daniel for sorting this out.

* Refactor the registring of attributes for buffers to move all non-custom
  ones to a vector allowing easier additions to the current set in the future.

Driver Cleanups
* gpiod related cleanups.  Make use of the additional parameter to specify
  	initial direciton to avoid extra code.
* bmc150 - Various refactorings to reduce code repitition and prepare for
           hardware buffer support.  Some of these cleanups are good even
	   without the new functionality.
* kmx61 - direct use of index to an array avoiding a structure element which
          was always the index to an element in an array of that structure.
* vf610 - avoid incorrect type for return from wait_for_completion_timeout.
* gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
* ade7754 - improve error handling including suppressing some build warnings.
* ade7759 - improve error handling including suppressing some build warnings.
* hmc5843 - Long line and indentation fixes. Also some constifying of various
      constant data.
* ade7854 - 80+ character line splitting.
* ad2s1210 - fix wrong printf format string.
* mxs-lradc - fix wrong printf format string.
* ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
* periodic rtc trigger - make the frequency type an unsigned int as it
  is always treated as such.
* jsa1212 - constify struct regmap_config as it is constant.
* ad7793 - typo in the MODULE_DESCRIPTION
* mma9551 - check gpiod_to_irq errors.  Note that this doesn't actually cause
    any trouble but is worth tidying up as obviously incorrect.
* mlx90614 - refactor the register symbols to make it clear which reads are to
    RAM not PROM.
2015-03-24 22:53:52 +01:00
Adriana Reus af5e1a6831 iio:inv-mpu6050: Fix inconsistency for the scale channel
Fix inconsistency in the semantics of the scale attribute.
For scale the write_raw function was considering the scale table index
and writing the appropriate value into the range register, while
for read_raw it was outputting the actual scale.
Fix this behaviour and adhere to the iio ABI specification.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Viorel Suman <viorel.suman@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:36:21 +00:00
Viorel Suman 4dac0a8eef iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
A hardware fifo reset always imply an invalidation of the
existing timestamps, so we'll clear timestamps fifo on
successfull hardware fifo reset.

Signed-off-by: Viorel Suman <viorel.suman@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:36:17 +00:00