The idea, and much of the code came originally from:
commit 0712f0249c3148d8cf42a3703403c278590d4de5
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Fri Jan 18 17:23:16 2013 -0800
drm/i915: Create a vtable for i915 gtt
Daniel didn't like the color of that patch series, and so I asked him to
start something which appealed to his sense of color. The preceding
patches are those, and now this is going on top of that.
[extracted from the original commit message]
One immediately obvious thing to implement is our gmch probing. The init
function was getting massively bloated. Fundamentally, all that's needed
from GMCH probing is the GTT size, and the stolen size. It makes design
sense to put the mappable calculation in there as well, but the code
turns out a bit nicer without it (IMO)
The intel_gtt bridge thing is still here, but the subsequent patches
will finish ripping that out.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Bikeshedded one comment (GMADR is just the PCI aperture, we
use it for other things than just accessing tiled surfaces through a
linear view) and cut the newly added long lines a bit. Also one
checkpatch error.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At the moment only cosmetics, but being able to initialize/cleanup
arbitrary ppgtt address spaces paves the way to have more than one of
them ... Just in case we ever get around to implementing real
per-process address spaces. Note that in that case another vfunc for
ppgtt would be beneficial though. But that can wait until the code
grows a second place which initializes ppgtts.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All the other gen6+ hw code has the gen6_ prefix, so be consistent
about it.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Like for the global gtt we want a notch more flexibility here. Only
big change (besides a few tiny function parameter adjustments) was to
move gen6_ppgtt_insert_entries up (and remove _sg_ from its name, we
only have one kind of insert_entries since the last gtt cleanup).
We could also extract the platform ppgtt setup/teardown code a bit
better, but I don't care that much.
With this we have the hw details of pte writing nicely hidden away
behind a bit of abstraction. Which should pave the way for
different/multiple ppgtts (e.g. what we need for real ppgtt support).
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have a few too many differences here, so finally take the prepared
abstraction and run with it. A few smaller changes are required to get
things into shape:
- move i915_cache_level up since we need it in the gt funcs
- split up i915_ggtt_clear_range and move the two functions down to
where the relevant insert_entries functions are
- adjustments to a few function parameter lists
Now we have 2 functions which deal with the gen6+ global gtt
(gen6_ggtt_ prefix) and 2 functions which deal with the legacy gtt
code in the intel-gtt.c fake agp driver (i915_ggtt_ prefix).
Init is still a bit a mess, but honestly I don't care about that.
One thing I've thought about while deciding on the exact interfaces is
a flag parameter for ->clear_range: We could use that to decide
between writing invalid pte entries or scratch pte entries. In case we
ever get around to fixing all our bugs which currently prevent us from
filling the gtt with empty ptes for the truly unused ranges ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwidawsk: Moved functions to the gtt struct]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
/sys/kernel/debug has more or less been the standard location of debugfs
for several years now. Other parts of DRM already use this location, so
we should as well.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: split up long line.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Note that this slightly changes the order, but we only move it within
the block of registers that restore encoder state. Specifically LVDS
is now restored after DP, whereas previously it was done before.
Legacy vga is still restored afterwards, which seems to be the
important thing (if there's anything important in this restore
ordering at all).
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The only thing we really care about that it is off. To do so, reuse
the recently created i915_redisable_vga function, which is already
used to put obnoxious firmware into check on lid reopening.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Similarly to how i915_dma.c is shaping up to be the dungeon hole for
all things supporting dri1, create a new one to hide all the crazy
things which are only really useful for ums support. Biggest part is
the register suspend/resume support.
Unfortunately a lot of it is still intermingled with bits and pieces
we might still need, so needs more analysis and needs to stay in
i915_suspend.c for now.
Reviewed-by: Imre Deak <imre.deak@intel.com>
v2: s/modeset_reg/display_reg/ as suggested by Imre, to avoid
confusion between the kernel modeset code and display save/restore to
support ums.
v3: Fixup alphabetical order in the Makefile, spotted by Chris Wilson.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull x86 fixes from Peter Anvin:
"This is a collection of miscellaneous fixes, the most important one is
the fix for the Samsung laptop bricking issue (auto-blacklisting the
samsung-laptop driver); the efi_enabled() changes you see below are
prerequisites for that fix.
The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI
debugging, and requiring CAP_SYS_RAWIO for MSR references, just as
with I/O port references."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
samsung-laptop: Disable on EFI hardware
efi: Make 'efi_enabled' a function to query EFI facilities
smp: Fix SMP function call empty cpu mask race
x86/msr: Add capabilities check
x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES
x86/olpc: Fix olpc-xo1-sci.c build errors
arch/x86/platform/uv: Fix incorrect tlb flush all issue
x86-64: Fix unwind annotations in recent NMI changes
x86-32: Start out cr0 clean, disable paging before modifying cr3/4
When COMP_MAX_TAG == 0, the tags mm was uninitialised. Fixed by initialising with zero length.
v2: Fix style error
Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Tested-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes long delay when waiting for scrubber on some secret engines.
The exit interrupt seems to not always be generated, so use secret
scrubber active register instead.
Later fuc engines also no longer generate an interrupt, so don't wait
there.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Originally 'efi_enabled' indicated whether a kernel was booted from
EFI firmware. Over time its semantics have changed, and it now
indicates whether or not we are booted on an EFI machine with
bit-native firmware, e.g. 64-bit kernel with 64-bit firmware.
The immediate motivation for this patch is the bug report at,
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557
which details how running a platform driver on an EFI machine that is
designed to run under BIOS can cause the machine to become
bricked. Also, the following report,
https://bugzilla.kernel.org/show_bug.cgi?id=47121
details how running said driver can also cause Machine Check
Exceptions. Drivers need a new means of detecting whether they're
running on an EFI machine, as sadly the expression,
if (!efi_enabled)
hasn't been a sufficient condition for quite some time.
Users actually want to query 'efi_enabled' for different reasons -
what they really want access to is the list of available EFI
facilities.
For instance, the x86 reboot code needs to know whether it can invoke
the ResetSystem() function provided by the EFI runtime services, while
the ACPI OSL code wants to know whether the EFI config tables were
mapped successfully. There are also checks in some of the platform
driver code to simply see if they're running on an EFI machine (which
would make it a bad idea to do BIOS-y things).
This patch is a prereq for the samsung-laptop fix patch.
Cc: David Airlie <airlied@linux.ie>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Peter Jones <pjones@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
That way the control flow is clearer, and it prepares the stage
to extract these ums functions and hide them somewhere.
There's still tons of display stuff outside of these, but that
requires more work.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Migrate Tegra clock support to drivers/clk/tegra, this involves
moving:
1. definition of tegra_cpu_car_ops to clk.c
2. definition of reset functions to clk-peripheral.c
3. change parent of cpu clock.
4. Remove legacy clock initialization.
5. Initialize clocks using DT.
6. Remove all instance of mach/clk.h
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: use to_clk_periph_gate().]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Implements WaVSRefCountFullforceMissDisable as documented in the BSpec
3D workarounds chapter.
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Force the crtc mem requests on/off immediately rather
than waiting for the double buffered updates to kick in.
Seems we miss the update in certain conditions. Also
handle the DCE6 case.
Signed-off-by: Christopher Staite <chris@yourdreamnet.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Our suspend code touches a lot of registers all over the place, so we
need to enable the power well before suspending.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Fixup compilation by stealing the header decl from the
dynamic power wells patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of setting it at the beginning of haswell_crtc_mode_set, let's
set it at the beginning of intel_crtc_mode_set. When
intel_crt_mode_set calls drm_vblank_pre_modeset we already need to
have the transcoder_edp correctly set, because eventually
drm_vblank_pre_modeset calls functions that call i915_pipe_enabled
from i915_irq.c, which will read PIPECONF(cpu_transcoder).
This is a bug that affects us since we added support for
TRANSCODER_EDP, but I was only able to see the problem after
suspending a machine with the power well disabled (got an "unclaimed
register" error.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One of the early return cases missed the mutex unlocking. Hilarity
ensued.
This regression has been introduced in
commit 7b24056be6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 12 00:35:33 2012 +0100
drm: don't hold crtc mutexes for connector ->detect callbacks
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59750
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Cancan Feng <cancan.feng@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We should avoid touching registers that are on the power down well
when we don't need to, because if we touch these registers when the
power well is disabled we'll get tons of "unclaimed register"
messages. This commit fixes some of these messages.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current code was wrong in many different ways, so this is a full
rewrite. We don't have "different power wells for different parts of
the GPU", we have a single power well, but we have multiple registers
that can be used to request enabling/disabling the power well. So
let's be a good citizen and only use the register we're suppose to
use, except when we're loading the driver, where we clear the request
made by the BIOS.
If any of the registers is requesting the power well to be enabled, it
will be enabled. If none of the registers is requesting the power well
to be enabled, it will be disabled.
For now we're just forcing the power well to be enabled, but in the
next commits we'll change this.
V2:
- Remove debug messages that could be misleading due to possible
race conditions with KVMr, Debug and BIOS.
- Don't wait on disabling: after a conversaion with a hardware
engineer we discovered that the "restriction" on bit 31 is just
for the "enable" case, and we don't even need to wait on the
"disable" case.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SR01 needs to be touched to disable VGA on non-UMS setups too.
So the sequencer registers need to include the appripriate offset
on VLV.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When passing the DP/HDMI/SDVO registers to the encoder init functions,
include the VLV specific offset in the value.
v2: Resolved conflicts w/ VLV SDVO elimination
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Don't call intel_sdvo_init() for VLV.
Preserve the same behaviour as when intel_sdvo_init() would
have returned false.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of using ADPA/VLV_ADPA/PCH_ADPA in various parts of
intel_crt code, just use adpa_reg which always contains the
correct value for the platform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Dropped the clock gating registers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just a few small things:
- 2x workaround bits from Chris to fix up the new scanline waits enabled
in 3.8 on snb. People who've been struck by this on dual-screen also
need to upgrade the ddx.
- Dump the kernel version into i915_error_state, we've had a few mixups
there recently.
- Disable gfx DMAR on gen4 devices, acked by David Woodhouse.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: dump UTS_RELEASE into the error_state
iommu/intel: disable DMAR for g4x integrated gfx
drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits
drm/i915: Disable AsyncFlip performance optimisations
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
V2: Add mutex protection, while read.
The hdmi and mixer win_commit calls currently are
not checking the status of IP before updating the
respective registers, this patch adds this check.
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fixes the following warning:
drivers/gpu/drm/exynos/exynos_drm_hdmi.c:111:13: warning:
symbol 'drm_hdmi_get_edid' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
While the exynos DRM support in principle can work on
multiplatform, the FIMD and IPP sections of it both
include the plat/map-base.h header file, which is
not available on multiplatform. Rather than disabling
the entire driver, we can just conditionally build
these two parts.
Without this patch, building allyesconfig results in:
drivers/gpu/drm/exynos/exynos_drm_fimc.c:19:27: fatal error: plat/map-base.h: No such file or directory
drivers/gpu/drm/exynos/exynos_drm_ipp.c:20:27: fatal error: plat/map-base.h: No such file or directory
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Patch 9eb3e9e6f3 "drm/exynos: add support for ARCH_MULTIPLATFORM"
allowed building the exynos hdmi driver on non-samsung platforms,
which unfortunately broke compilation in combination with 22c4f42897
"drm: exynos: hdmi: add support for exynos5 hdmi", which added
an inclusion of the samsung-specific plat/gpio-cfg.h header file.
Fortunately, that header file is not required any more here, so
we can simply revert the inclusion in order to build the ARM
allyesconfig again without getting this error:
drivers/gpu/drm/exynos/exynos_hdmi.c:37:27: fatal error: plat/gpio-cfg.h: No such file or directory
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Remove the "internal" interrupt handling since it's never invoked and
remove "external" reference. This patch removes a bunch of dead code
and clarifies how hotplugging is handled in the HDMI driver.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fixes the following warnings:
drivers/gpu/drm/exynos/exynos_drm_rotator.c:737:24: warning:
symbol 'rot_limit_tbl' was not declared. Should it be static?
drivers/gpu/drm/exynos/exynos_drm_rotator.c:754:27: warning:
symbol 'rotator_driver_ids' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Replace the unnecessary atomic mdelay calls with usleep_range calls.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fixes the following warning:
drivers/gpu/drm/exynos/exynos_drm_ipp.c:872:6: warning:
symbol 'ipp_handle_cmd_work' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fixes the following warning:
drivers/gpu/drm/exynos/exynos_drm_g2d.c:327:12: warning:
symbol 'g2d_userptr_get_dma_addr' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch considers DMA_NONE flag for other drivers not using
dma mapping framework with iommu such as 3d gpu driver or others.
For example, there might be 3d gpu driver that has its own iommu
hw unit and iommu table mapping mechnism. So in this case,
the dmabuf buffer imported into this driver needs just only
sg table to map the buffer with its own iommu table itself.
So this patch makes dma_buf_map_attachment ignore dma_map_sg call
and just return sg table containing pages if dma_data_direction
is DMA_NONE.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch releases sgt's sg object allocated by sgt_alloc_table
correctly.
When exynos_gem_map_dma_buf was called by dma_buf_map_attachmemt(),
the sgt's sg object was allocated by sg_alloc_tale() so
if dma_map_sg() is failed, the sg object should be released.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
If edid of vidi from user is invalid, size calculated from a number
of cea extensions can be wrong. So, validation should be checked.
Changelog v2:
- just code cleanup
. declare raw_edid only if vidi->connection is enabled.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There's no need to allocate edid twice and do a memcpy when drm helpers
exist to do just that. This patch cleans that interaction up, and
doesn't keep the edid hanging around in the connector.
v4:
- removed error check for drm_mode_connector_update_edid_property
which is expected to fail for Virtual Connectors like VIDI.
Thanks to Seung-Woo Kim.
v3:
- removed MAX_EDID as it is not used anymore.
v2:
- changed vidi_get_edid callback inside vidi driver.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This will cause display registers to include the correct
offset on VLV.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GPIO/GMBUS registers must be offset on VLV, so simply
adjust gpio_mmio_base to include the correct offset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of 0x18xxxx use (VLV_DISPLAY_BASE + xxxx).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of 0x18xxxx use (VLV_DISPLAY_BASE + xxxx).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
CURSIZE is not present on VLV, so it was left out, as were the IVB
specific cursor B registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add an optional offset to intel_device_info, which will added
to most display register offsets.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use intel_dig_port->port rather than intel_dp->output_reg.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use intel_dig_port->port rather than intel_hdmi->sdvox_erg.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes GPU hang during DMA ring IB test.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59672
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because the register does not exist in gen5+.
This patch solves "unclaimed register" messages on Haswell after
suspend/resume.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If one (but not both) allocations of p->chunks[].kpage[]
in radeon_cs_parser_init fail, the error path will free
the successfully allocated page, but leave a stale pointer
value in the kpage[] field. This will later cause a
double-free when radeon_cs_parser_fini is called.
This patch fixes the issue by forcing both pointers to NULL
after kfree in the error path.
The circumstances under which the problem happens are very
rare. The card must be AGP and the system must run out of
kmalloc area just at the right time so that one allocation
succeeds, while the other fails.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Aruba and newer gpu does not need the avivo cursor work around,
quite the opposite this work around lead to corruption.
agd5f: check DCE6 rather than ARUBA since the issue is DCE
version specific rather than family specific.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Useful for statistics or on overflowing bug reports to keep things all
lined up.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1,
the hardware can not program the scanline values. Those scanline values
then control when the signal is sent from the display engine to the render
ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB
invalidations must be performed explicitly through the appropriate bits
being set in PIPE_CONTROL.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52311
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a required workarounds for all products, especially on gen6+
where it causes the command streamer to fail to parse instructions
following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising
between the GPU and the display engines, and so this bit being unset may
cause hangs.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52311
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 09153000b8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 12 14:06:44 2012 +0100
drm/i915: rework locking for intel_dpio|sbi_read|write
reworked the locking around sbi_read/write functions for 3.8-fixes.
But
commit dde86e2db5
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Sat Dec 1 12:04:25 2012 -0200
drm/i915: add lpt_init_pch_refcl
Added new use-cases in the -next tree which has not been updated in
the merge. Fix it up.
Reported-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ELD info should be updated dynamically according to hot plug event.
For haswell chip, clear/set the eld valid bit and output enable bit
from callback intel_disable/eanble_ddi().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When machine was rebooted or module was reloaded,
gem_hw_init() set last_seqno to be identical to next_seqno.
This lead to situation that waits for first ever request
always passed immediately regardless if it was actually
executed.
Use gem_set_seqno() to be consistent how hw is
initialized on init, wrap and on resume.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44156
Reported-by: Alan Zimmerman <alan.zimm@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=31522#c35
[Note: There are more than one broken setups in the bug. This fixes one.]
Reported-by: Martins <andrissr@inbox.lv>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59628
Reported-by: Roland Gruber <post@rolandgruber.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Dave Airlie <airlied@redhat.com>
CC: Alan Cox <alan@linux.intel.com>
CC: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Lespiau wondered how race the gpu reset/hang detection code is
against concurrent gpu resets/hang detections or combinations thereof.
Luckily the single work item is guranteed to never run concurrently,
so reset handling is already single-threaded.
Hence we only have to worry about concurrent hang detections, or a
hang detection firing off while we're still processing an older gpu
reset request. Due to the new mechanism of setting the reset in
progress flag and the ordering guaranteed by the schedule_work
function there's nothing to do but add a comment explaining why we're
safe.
The only thing I've noticed is that we still try to reset the gpu now,
even when it is declared terminally wedged. Add a check for that to
avoid continous warnings about failed resets, in case the hangcheck
timer ever gets stuck.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the previous patch the state transition handling of the reset
code itself is now (hopefully) race free and solid. But that still
leaves out everyone else - with the various lock-free wait paths
we have there's the possibility that the reset happens between the
point where we read the seqno we should wait on and the actual wait.
And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll
happily wait for a seqno which will in all likelyhood never signal.
In practice this is not a big problem since the X server gets
constantly interrupted, and can then submit more work (hopefully) to
unblock everyone else: As soon as a new seqno write lands, all waiters
will unblock. But running the i-g-t reset testcase ZZ_hangman can
expose this race, especially on slower hw with fewer cpu cores.
Now looking forward to ARB_robustness and friends that's not the best
possible behaviour, hence this patch adds a reset_counter to be able
to detect any reset, even if a given thread never observed the
in-progress state.
The important part is to correctly order things:
- The write side needs to increment the counter after any seqno gets
reset. Hence we need to do that at the end of the reset work, and
again wake everyone up. We also need to place a barrier in between
any possible seqno changes and the counter increment, since any
unlock operations only guarantee that nothing leaks out, but not
that at later load operation gets moved ahead.
- On the read side we need to ensure that no reset can sneak in and
invalidate the seqno. In all cases we can use the one-sided barrier
that unlock operations guarantee (of the lock protecting the
respective seqno/ring pair) to ensure correct ordering. Hence it is
sufficient to place the atomic read before the mutex/spin_unlock and
no additional barriers are required.
The end-result of all this is that we need to wake up everyone twice
in a reset operation:
- First, before the reset starts, to get any lockholders of the locks,
so that the reset can proceed.
- Second, after the reset is completed, to allow waiters to properly
and reliably detect the reset condition and bail out.
I admit that this entire reset_counter thing smells a bit like
overkill, but I think it's justified since it makes it really explicit
what the bail-out condition is. And we need a reset counter anyway to
implement ARB_robustness, and imo with finer-grained locking on the
horizont this is the most resilient scheme I could think of.
v2: Drop spurious change in the wait_for_error EXIT_COND - we only
need to wait until we leave the reset-in-progress wedged state.
v3: Don't play tricks with barriers in the throttle ioctl, the
spin_unlock is barrier enough.
I've also considered using a little helper to grab the current
reset_counter, but then decided that hiding the atomic_read isn't a
great idea, since having it explicitly show up in the code is a nice
remainder to reviews to check the memory barriers.
v4: Add a comment to explain why we need to fall through in
__wait_seqno in the end variable assignments.
v5: Review from Damien:
- s/smb/smp/ in a comment
- don't increment the reset counter after we've set it to WEDGED. Now
we (again) properly wedge the gpu when the reset fails.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
if we have a move notify callback, when moving fails, we call move notify
the opposite way around, however this ends up with *mem containing the mm_node
from the bo, which means we double free it. This is a follow on to the previous
fix.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we are using memcpy to move objects around, and we fail to memcpy
due to lack of memory to populate or failure to finish the copy, we don't
want to destroy the mm_node that has been copied into old_copy.
While working on a new kms driver that uses memcpy, if I overallocated bo's
up to the memory limits, and eviction failed, then machine would oops soon
after due to having an active bo with an already freed drm_mm embedded in it,
freeing it a second time didn't end well.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
More important fixes for 3.9:
- error_state improvements to help debug the new scanline wait code added
for gen6+ - bug reports started popping up :( patch from Chris Wilson.
- fix a panel power sequence confusion between the eDP and lvds detection
code resulting in black screens - regression introduce in 3.8 (Jani
Nikula)
- Chris fixed the root-cause of the ilk relocation vs. evict bug.
- Another piece of cargo-culted rc6 lore from Jani, fixes up a regression
where a system refused to go into rc6 after suspend sometimes.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: fix FORCEWAKE posting reads
drm/i915: Invalidate the relocation presumed_offsets along the slow path
drm/i915/eDP: do not write power sequence registers for ghost eDP
drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state
The aim of this locking rework is that ioctls which a compositor should be
might call for every frame (set_cursor, page_flip, addfb, rmfb and
getfb/create_handle) should not be able to block on kms background
activities like output detection. And since each EDID read takes about
25ms (in the best case), that always means we'll drop at least one frame.
The solution is to add per-crtc locking for these ioctls, and restrict
background activities to only use the global lock. Change-the-world type
of events (modeset, dpms, ...) need to grab all locks.
Two tricky parts arose in the conversion:
- A lot of current code assumes that a kms fb object can't disappear while
holding the global lock, since the current code serializes fb
destruction with it. Hence proper lifetime management using the already
created refcounting for fbs need to be instantiated for all ioctls and
interfaces/users.
- The rmfb ioctl removes the to-be-deleted fb from all active users. But
unconditionally taking the global kms lock to do so introduces an
unacceptable potential stall point. And obviously changing the userspace
abi isn't on the table, either. Hence this conversion opportunistically
checks whether the rmfb ioctl holds the very last reference, which
guarantees that the fb isn't in active use on any crtc or plane (thanks
to the conversion to the new lifetime rules using proper refcounting).
Only if this is not the case will the code go through the slowpath and
grab all modeset locks. Sane compositors will never hit this path and so
avoid the stall, but userspace relying on these semantics will also not
break.
All these cases are exercised by the newly added subtests for the i-g-t
kms_flip, tested on a machine where a full detect cycle takes around 100
ms. It works, and no frames are dropped any more with these patches
applied. kms_flip also contains a special case to exercise the
above-describe rmfb slowpath.
* 'drm-kms-locking' of git://people.freedesktop.org/~danvet/drm-intel: (335 commits)
drm/fb_helper: check whether fbcon is bound
drm/doc: updates for new framebuffer lifetime rules
drm: don't hold crtc mutexes for connector ->detect callbacks
drm: only grab the crtc lock for pageflips
drm: optimize drm_framebuffer_remove
drm/vmwgfx: add proper framebuffer refcounting
drm/i915: dump refcount into framebuffer debugfs file
drm: refcounting for crtc framebuffers
drm: refcounting for sprite framebuffers
drm: fb refcounting for dirtyfb_ioctl
drm: don't take modeset locks in getfb ioctl
drm: push modeset_lock_all into ->fb_create driver callbacks
drm: nest modeset locks within fpriv->fbs_lock
drm: reference framebuffers which are on the idr
drm: revamp framebuffer cleanup interfaces
drm: create drm_framebuffer_lookup
drm: revamp locking around fb creation/destruction
drm: only take the crtc lock for ->cursor_move
drm: only take the crtc lock for ->cursor_set
drm: add per-crtc locks
...
We need to make sure that the fbcon is still bound when touching the
hw, since otherwise we might corrupt the modeset state of kms clients.
X mostly works around that with VT switching and setting the VT into
raw mode, which disables most fbcon events.
Raw kms test programs though don't do that dance, and in the future
we might want to aim to abolish CONFIG_VT anyway. So improve preventive
measures a bit. To do so, extract the existing logic for handling hotplug
events (which X can't block with the current set of tricks) and reuse
it for the fbdev blanking helper.
Long-term we really need to either scrap this all and only have a OOPS
console, or come up with a saner model for device ownership sharing
between fbdev/fbcon and kms userspace.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The coup de grace of the entire journey. No more dropped frames every
10s on my testbox!
I've tried to audit all ->detect and ->get_modes callbacks, but things
became a bit fuzzy after trying to piece together the umpteenth
implemenation. Afaict most drivers just have bog-standard output
register frobbing with a notch of i2c edid reading, nothing which
could potentially race with the newly concurrent pageflip/set_cursor
code. The big exception is load-detection code which requires a
running pipe, but radeon/nouveau seem to to this without touching any
state which can be observed from page_flip (e.g. disabled crtcs
temporarily getting enabled and so a pageflip succeeding).
The only special case I could find is the i915 load detect code. That
uses the normal modeset interface to enable the load-detect crtc, and
so userspace could try to squeeze in a pageflip on the load-detect
pipe. So we need to grab the relevant crtc mutex in there, to avoid
the temporary crtc enabling to sneak out and be visible to userspace.
Note that the sysfs files already stopped grabbing the per-crtc locks,
since I didn't want to bother with doing a interruptible
modeset_lock_all. But since there's very little in-between breakage
(essentially just the ability for userspace to pageflip on load-detect
crtcs when it shouldn't on the i915 driver) I figured I don't need to
bother.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The pagelip ioctl itself is rather simply, so the hard work for this
patch is auditing all the drivers:
- exynos: Pageflip is protect with dev->struct_mutex and ...
synchronous. But nothing fancy going on, besides a check whether the
crtc is enabled, which should probably be somewhere in the drm core
so that we have unified behaviour across all drivers.
- i915: hw-state is protected with dev->struct_mutex, the delayed
unpin work together with the other stuff the pageflip complete irq
handler needs is protected by the event_lock spinlock.
- nouveau: With the pin/unpin functions fixed, everything looks safe:
A bit of ttm wrestling and refcounting, and a few channel accesses.
The later are either already proteced sufficiently, or are now safe
with the channel locking introduced to make cursor updates safe.
- radeon: The irq_get/put functions look a bit race, since the
atomic_inc/dec isn't protect with locks. Otoh they're all per-crtc,
so we should be safe with per-crtc locking from the drm core. Then
there's tons of per-crtc register access, which could potentially go
through the indirect reg acces. But that's fixed to make cursor
updates concurrent. Bookeeping for the drm even is also protected
with the even_lock, which also protects against the pageflip irq
handler since radeon hw seems to have no way to queue these up
asynchronously. Otherwise just a bit of ttm-based buffer handling
and fencing, which is now safe with the previous patch to hold
bdev->fence_lock while grabbing the ttm fence.
- shmob: Only one crtc. That's an easy one ...
- vmwgfx: As usual a bit special with tons different things:
- Flippable check using is_implicit and num_implicit. Changes to
those seem to be nicely covered with the global modeset lock, so
we should be fine.
- Some dirty cliprect handling stuff, or at least that is my guess.
Looks like it's fine since either it's per-crtc, invariant or
(like the execbuf stuff launched) protected otherwise.
- Adding the actual flip to the fence_event list. On a quick look
this seems to have solid locking in place, too.
... but generally this is all way over my head.
- imx: Impressive display of races between the page_flip
implementation and the irq handler. Also, ipu_drm_set_base which
gets eventually called from the irq handler to update the display
base isn't really protected against concurrent set_config calls from
process context. In any case, going for per-crtc locking won't make
this worse, so nothing to do.
- omap: The new async callback code merged into 3.8 seems to have
solid locking in place, and there doesn't seem to be any shared
state at risk. Especially since the callbacks still use
modeset_lock_all and are so not converted.
v2: Update omapdrm analysis to 3.8 code per the discussion with Rob
Clark.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that all framebuffer usage is properly refcounted, we are no
longer required to hold the modeset locks while dropping the last
reference. Hence implemented a fastpath which avoids the potential
stalls associated with grabbing mode_config.lock for the case where
there's no other reference around.
Explain in a big comment why it is safe. Also update kerneldocs with
the new locking rules around drm_framebuffer_remove.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Afact vmwgfx already has all the right refcounting implemented on the
backing storage, and we only need to ensure that the drm fb doesn't
disappear untimely. So holding onto the fb reference from _lookup
until vmw_kms_present has completed should be enough.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the prep patch to encapsulate ->set_crtc calls, this is now
rather easy. Hooray for inconsistent semantics between ->set_crtc and
->page_flip, where the driver callback is supposed to update the fb
pointer, and ->update_plane, where the drm core does the same.
Also, since the drm core functions check crtc->fb before calling into
driver callbacks, we can't really reduce the critical sections
protected by the mode_config locks.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now plane->fb holds a reference onto it's framebuffer. Nothing too
fancy going on here:
- Extract __drm_framebuffer_unreference to be called when we know
we're not dropping the last reference, e.g. useful in the fb cleanup
code.
- Reduce the locked sections in the set_plane ioctl to only protect
plane->fb/plane->crtc and the driver callback (i.e. hw state).
Everything either doesn't disappear (crtc, plane) or is refcounted
(fb), and all the data we check is invariant over the respective
object's lifetimes.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We only need to ensure that the fb stays around for long enough. While
at it, only grab the modeset locks when we need them (since most
drivers don't implement the dirty callback, this should help jitter
and stalls when using the generic modeset driver).
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We only need to push the fb unreference a bit down. While at it,
properly pass the return value from ->create_handle back to userspace.
Most drivers either return -ENODEV if they don't have a concept of
buffer objects (ast, cirrus, ...) or just install a handle for the
underlying gem object (which is ok since we hold a reference on that
through the framebuffer).
v2: Split out the ->create_handle rework in the individual drivers.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And drop it where it's not needed. Most driver just lookup the gem
object, allocate an fb struct, fill in all the useful fields and then
register it with drm_framebuffer_init.
All of these operations are already separately locked, and since we
only put the fb into the fpriv->fbs list _after_ having called
->fb_create, we can't also race with rmfb. We can otoh race with other
ioctls that put the framebuffer to use, but all drivers have been
reorganized already to call drm_framebuffer_init last in the fb
creation sequence.
So essentially, we can completely remove any modeset locks from the
addfb ioctl paths. Yeah!
Also, reference-counting is solid - we get a reference from fb_create
which we transfer to the fpriv->fbs list. And after unlocking the
fpriv->fbs_lock we don't touch the framebuffer any longer. Furthermore
drm_framebuffer_init has added a 2nd reference for the idr lookup, and
any access through that table will do it's own refcounting.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Atm we still need to unconditionally take the modeset locks in the
rmfb paths. But eventually we only want to take them if there are
other users around as a slow-path. This way sane userspace avoids
blocking on edid reads and other stuff in rmfb if it ensures that the
fb isn't used anywhere by a crtc/plane.
We can do a quick check for such other users once framebuffers are
properly refcounting by locking at the refcount - if it's more than 1,
there are other users left. Again, rmfb racing against other ioctls
isn't a real problem, userspace is allowed to shoot its foot.
This patch just prepares this by moving the modeset locks to nest
within fpriv->fbs_lock. Now the distinction between the fbs_lock and
the device-global fb_lock is clear, since we need to hold the fbs_lock
outside of any modeset_locks in fb_release.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since otherwise looking and reference-counting around
drm_framebuffer_lookup will be an unmanageable mess. With this change,
an object can either be found in the idr and will stay around once we
incremented the reference counter. Or it will be gone for good and
can't be looked up using its id any more.
Atomicity is guaranteed by the dev->mode_config.fb_lock. The
newly-introduce fpriv->fbs_lock looks a bit redundant, but the next
patch will shuffle the locking order between these two locks and all
the modeset locks taken in modeset_lock_all, so we'll need it.
Also, since userspace could do really funky stuff and race e.g. a
getresources with an rmfb, we need to make sure that the kernel
doesn't fall over trying to look-up an inexistent fb, or causing
confusion by having two fbs around with the same id. Simply reset the
framebuffer id to 0, which marks it as reaped. Any lookups of that id
will fail, so the object is really gone for good from userspace's pov.
Note that we still need to protect the "remove framebuffer from all
use-cases" and the final unreference with the modeset-lock, since most
framebuffer use-sites don't implement proper reference counting yet.
We can only lift this once _all_ users are converted.
With this change, two references are held on alife, but unused
framebuffers:
- The reference for the idr lookup, created in this patch.
- For user-created framebuffers the fpriv->fbs reference, for
driver-private fbs the driver is supposed to hold it's own last
reference.
Note that the dev->mode_config.fb_list itself does _not_ hold a
reference onto the framebuffers (this list is essentially only used
for debugfs files). Hence if there's anything left there when the
driver has cleaned up all it's modeset resources, this is a ref-leak.
WARN about it.
Now we only need to fix up all other places to properly reference
count framebuffers.
v2: Fix spelling fail in a comment spotted by Rob Clark.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have two classes of framebuffer
- Created by the driver (atm only for fbdev), and the driver holds
onto the last reference count until destruction.
- Created by userspace and associated with a given fd. These
framebuffers will be reaped when their assoiciated fb is closed.
Now these two cases are set up differently, the framebuffers are on
different lists and hence destruction needs to clean up different
things. Also, for userspace framebuffers we remove them from any
current usage, whereas for internal framebuffers it is assumed that
the driver has done this already.
Long story short, we need two different ways to cleanup such drivers.
Three functions are involved in total:
- drm_framebuffer_remove: Convenience function which removes the fb
from all active usage and then drops the passed-in reference.
- drm_framebuffer_unregister_private: Will remove driver-private
framebuffers from relevant lists and drop the corresponding
references. Should be called for driver-private framebuffers before
dropping the last reference (or like for a lot of the drivers where
the fbdev is embedded someplace else, before doing the cleanup
manually).
- drm_framebuffer_cleanup: Final cleanup for both classes of fbs,
should be called by the driver's ->destroy callback once the last
reference is gone.
This patch just rolls out the new interfaces and updates all drivers
(by adding calls to drm_framebuffer_unregister_private at all the
right places)- no functional changes yet. Follow-on patches will move
drm core code around and update the lifetime management for
framebuffers, so that we are no longer required to keep framebuffers
alive by locking mode_config.mutex.
I've also updated the kerneldoc already.
vmwgfx seems to again be a bit special, at least I haven't figured out
how the fbdev support in that driver works. It smells like it's
external though.
v2: The i915 driver creates another private framebuffer in the
load-detect code. Adjust its cleanup code, too.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And replace all fb lookups with it. Also add a WARN to
drm_mode_object_find since that is now no longer the blessed interface
to look up an fb. And add kerneldoc to both functions.
This only updates all callsites, but immediately drops the acquired
refence again. Hence all callers still rely on the fact that a mode fb
can't disappear while they're holding the struct mutex. Subsequent
patches will instate proper use of refcounts, and then rework the rmfb
and unref code to no longer serialize fb destruction with the
mode_config lock. We don't want that since otherwise a compositor
might end up stalling for a few frames in rmfb.
v2: Don't use kref_get_unless_zero - Greg KH doesn't like that kind of
interface.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Well, at least step 1. The goal here is that framebuffer objects can
survive outside of the mode_config lock, with just a reference held
as protection. The first step to get there is to introduce a special
fb_lock which protects fb lookup, creation and destruction, to make
them appear atomic.
This new fb_lock can nest within the mode_config lock. But the idea is
(once the reference counting part is completed) that we only quickly
take that fb_lock to lookup a framebuffer and grab a reference,
without any other locks involved.
vmwgfx is the only driver which does framebuffer lookups itself, also
wrap those calls to drm_mode_object_find with the new lock.
Also protect the fb_list walking in i915 and omapdrm with the new lock.
As a slight complication there's also the list of user-created fbs
attached to the file private. The problem now is that at fclose() time
we need to walk that list, eventually do a modeset call to remove the
fb from active usage (and are required to be able to take the
mode_config lock), but in the end we need to grab the new fb_lock to
remove the fb from the list. The easiest solution is to add another
mutex to protect this per-file list.
Currently that new fbs_lock nests within the modeset locks and so
appears redudant. But later patches will switch around this sequence
so that taking the modeset locks in the fb destruction path is
optional in the fastpath. Ultimately the goal is that addfb and rmfb
do not require the mode_config lock, since otherwise they have the
potential to introduce stalls in the pageflip sequence of a compositor
(if the compositor e.g. switches to a fullscreen client or if it
enables a plane). But that requires a few more steps and hoops to jump
through.
Note that framebuffer creation/destruction is now double-protected -
once by the fb_lock and in parts by the idr_lock. The later would be
unnecessariy if framebuffers would have their own idr allocator. But
that's material for another patch (series).
v2: Properly initialize the fb->filp_head list in _init, otherwise the
newly added WARN to check whether the fb isn't on a fpriv list any
more will fail for driver-private objects.
v3: Fixup two error-case unlock bugs spotted by Richard Wilbur.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
->cursor_move uses mostly the same facilities in drivers as
->cursor_set, so pretty much nothing to fix up:
- ast/gma500/i915: They all use per-crtc registers to update the
cursor position. ast again touches the global cursor cache, but
that's ok since there's only one crtc.
- nouveau: nv50+ is again special, updates happen through the per-crtc
channel (without pushbufs), so it's not protected by the new evo
lock introduced earlier. But since this channel is per-crtc, we
should be fine anyway.
- radeon: A bit a mess: avivo asics need a workaround when both output
pipes are enabled, which means it'll access the crtc list. Just
reading that flag is ok though as long as radeon _always_ grabs all
locks when changing the crtc configuration. Which means with the
current scheme it cannot do an optimized modeset which only locks
the relevant crtcs. This can be fixed though by introducing a bit of
global state with separate locks and ensure in the modeset code that
the cursor will be updated appropriately when enabling the 2nd pipe
(on affected asics).
- vmwgfx: I still don't understand what it's doing exactly, so apply
the same trick for now.
v2: Fixup unlocking for the error cases, spotted by Richard Wilbur.
v3: Another error-case fixup.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
First convert ->cursor_set to only take the crtc lock, since that
seems to be the function with the least amount of state - the core
ioctl function doesn't check anything which can change at runtime, so
we don't have any object lifetime issues to contend.
The only thing which is important is that the driver's implementation
doesn't touch any state outside of that single crtc which is not yet
properly protected by other locking:
- ast: access the global ast->cache_kmap. Luckily we only have on crtc
on this driver, so this is fine. Add a comment.
- gma500: calls gma_power_begin|and and psb_gtt_pin|unpin, both which
have their own locking to protect their state. Everything else is
crtc-local.
- i915: touches a bit of global gem state, all protected by the One
Lock to Rule Them All (dev->struct_mutex).
- nouveau: Pre-nv50 is all nice, nv50+ uses the evo channels to queue
up all display changes. And some of these channels are device
global. But this is fine now since the previous patch introduced an
evo channel mutex.
- radeon: Uses some indirect register access for cursor updates, but
with the previous patches to protect these indirect 2-register
access patterns with a spinlock, this should be fine now, too.
- vmwgfx: I have no idea how that works - update_cursor_position
doesn't take any per-crtc argument and I haven't figured out any
other place where this could be set in some form of a side-channel.
But vmwgfx definitely has more than one crtc (or at least can
register more than one), so I have no idea how this is supposed to
not fail with the current code already. Hence take the easy way out
and simply acquire all locks (which requires dropping the crtc lock
the core acquired for us). That way it's not worse off for
consistency than the old code.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
*drumroll*
The basic idea is to protect per-crtc state which can change without
touching the output configuration with separate mutexes, i.e. all the
input side state to a crtc like framebuffers, cursor settings or plane
configuration. Holding such a crtc lock gives a read-lock on all the
other crtc state which can be changed by e.g. a modeset.
All non-crtc state is still protected by the mode_config mutex.
Callers that need to change modeset state of a crtc (e.g. dpms or
set_mode) need to grab both the mode_config lock and nested within any
crtc locks.
Note that since there can only ever be one holder of the mode_config
lock we can grab the subordinate crtc locks in any order (if we need
to grab more than one of them). Lockdep can handle such nesting with
the mutex_lock_nest_lock call correctly.
With this functions that only touch connectors/encoders but not crtcs
only need to take the mode_config lock. The biggest such case is the
output probing, which means that we can now pageflip and move cursors
while the output probe code is reading an edid.
Most cases neatly fall into the three buckets:
- Only touches connectors and similar output state and so only needs
the mode_config lock.
- Touches the global configuration and so needs all locks.
- Only touches the crtc input side and so only needs the crtc lock.
But a few cases that need special consideration:
- Load detection which requires a crtc. The mode_config lock already
prevents a modeset change, so we can use any unused crtc as we like
to do load detection. The only thing to consider is that such
temporary state changes don't leak out to userspace through ioctls
that only take the crtc look (like a pageflip). Hence the load
detect code needs to grab the crtc of any output pipes it touches
(but only if it touches state used by the pageflip or cursor
ioctls).
- Atomic pageflip when moving planes. The first case is sane hw, where
planes have a fixed association with crtcs - nothing needs to be
done there. More insane^Wflexible hw needs to have plane->crtc
mapping which is separately protect with a lock that nests within
the crtc lock. If the plane is unused we can just assign it to the
current crtc and continue. But if a plane is already in use by
another crtc we can't just reassign it.
Two solution present themselves: Either go back to a slow-path which
takes all modeset locks, potentially incure quite a hefty delay. Or
simply disallowing such changes in one atomic pageflip - in general
the vblanks of two crtcs are not synced, so there's no sane way to
atomically flip such plane changes accross more than one crtc. I'd
heavily favour the later approach, going as far as mandating it as
part of the ABI of such a new a nuclear pageflip.
And if we _really_ want such semantics, we can always get them by
introducing another pageflip mutex between the mode_config.mutex and
the individual crtc locks. Pageflips crossing more than one crtc
would then need to take that lock first, to lock out concurrent
multi-crtc pageflips.
- Optimized global modeset operations: We could just take the
mode_config lock and then lazily lock all crtc which are affected by
a modeset operation. This has the advantage that pageflip could
continue unhampered on unaffected crtc. But if e.g. global resources
like plls need to be reassigned and so affect unrelated crtcs we can
still do that - nested locking works in any order.
This patch just adds the locks and takes them in drm_modeset_lock_all,
no real locking changes yet.
v2: Need to initialize the new lock in crtc_init and lock it righ
away, for otherwise the modeset_unlock_all below will try to unlock a
not-locked mutex.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ok, this one here is a bit more complicated, and I can't really claim
to fully understand the locking and lifetime rules of the vmwgfx
driver. So just convert ever mutex_lock call, including the
interruptible one. Since other places (e.g. in the execbuf ioctl) take
the mode_config.mutex without bothering with interruptible handling,
I've figured I should be able to get away with this in a few more
places ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only two places:
- suspend/resume
- Some really strange mode validation tool with too much funny-lucking
hand-rolled conversion code.
- The recently-added lastclose fbdev restore code.
Better safe than sorry, so convert both places to keep the locking
semantics as much as possible.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Two exceptions:
- debugfs files only read information which is not related to crtc, so
can stay on the modeset_config lock.
- Same holds for the edp vdd work in intel_dp.c. Add a corresponding
WARN_ON and a comment next to the intel_dp struct fields for
documentation.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the first step towards introducing the new modeset locking
scheme. The plan is to put helper functions into place at all the
right places step-by-step, so that the final patch to switch on the
new locking scheme doesn't need to touch every single driver.
This helper here will serve as the shotgun solutions for all places
where a more fine-grained locking isn't (yet) implemented.
v2: Fixup kerneldoc for unlock_all.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With refcounting we need to adjust framebuffer refcounts at each
callsite - much easier to do if they all call the same little helper
function.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some drivers don't have real ->create_handle callbacks.
- cirrus/ast/mga200: Returns either 0 or -EINVAL.
- udl: Didn't even bother with a callback, leading to a nice
userspace-triggerable OOPS.
- vmwgfx: This driver bothered with an implementation to return 0 as
the handle (which is the canonical no-obj gem handle).
All have in common that ->create_handle doesn't really make too much
sense for them - that ioctl is used only for seamless fb takeover in
the radeon/nouveau/i915 ddx drivers. So allow drivers to not implement
this and return a consistent -ENODEV.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... by moving the bo_pin/bo_unpin manipulation of the pin_refcount
under the protection of the ttm reservation lock. pin/unpin seems
to get called from all over the place, so atm this is completely racy.
After this patch there are only a few places in cleanup functions
left which access ->pin_refcount without locking. But I'm hoping that
those are safe and some other code invariant guarantees that this
won't blow up.
In any case, I only need to fix up pin/unpin to make ->pageflip work
safely, so let's keep it at that.
Add a comment to the header to explain the new locking rule.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With per-crtc locks modeset operations can run in parallel, and the
cursor code uses the device-global evo master channel for hw frobbing.
But the pageflip code can also sync with the master under some
circumstances. Hence just wrap things up in a mutex to ensure that
pushbuf access doesn't intermingle.
The approach here is a bit overkill since the per-crtc channels used
to schedule the pageflips could probably be used without this pushbuf
locking, but I'm not familiar enough with the nouveau codebase to be
sure of that.
v2: Add missing mutex_init to avoid angering lockdep.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Doing this within the fb->destroy callback leads to a locking
nightmare. And all other drm drivers that restore the fbcon do
it in lastclose, too.
With this adjustments all fb->destroy callbacks optionally drop
references to any gem objects used as backing storage, call
drm_framebuffer_cleanup and then kfree the struct. Which nicely
simplifies the locking for framebuffer unreferencing and freeing,
since this doesn't require that we hold the mode_config lock. A
slight exception is the vmwgfx surface backed framebuffer, it also
calls drm_master_put and removes the object from a device-private
framebuffer list. Both seem to have solid locking in place already.
Conclusion is that now it is no longer required to hold the
mode_config lock while freeing a framebuffer.
v2: Drop the corresponding mutex_lock WARN check from
drm_framebuffer_unreference.
v3: Use just the mode_config lock not modeset_lock_all, due to patch
reordering.
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
vmwgfx has an oddity, when failing to reference the surface it'll
return 0, since that's what the successfull drm_framebuffer_init will
leave behind in ret. Fix this up by returning -EINVAL.
Split out from all the other driver updates due to the above tiny
semantic change. Shouldn't matter though since the reference grabbing
seemingly can't fail.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With more fine-grained locking we can no longer rely on the big
mode_config lock to prevent concurrent access to mode resources
like framebuffers. Instead a framebuffer becomes accessible to
other threads as soon as it is added to the relevant lookup
structures. Hence it needs to be fully set up by the time drivers
call drm_framebuffer_init.
This patch here is the drivers part of that reorg. Nothing really fancy
going on safe for three special cases.
- exynos needs to be careful to properly unref all handles.
- nouveau gets a resource leak fixed for free: one of the error
cases didn't cleanup the framebuffer, which is now moot since
the framebuffer is only registered once it is fully set up.
- vmwgfx requires a slight reordering of operations, I'm hoping I didn't
break anything (but it's refcount management only, so should be safe).
v2: Split out exynos, since it's a bit more hairy than expected.
v3: Drop bogus cirrus hunk noticed by Richard Wilbur.
v4: Split out vmwgfx since there's a small change in return values.
Reviewed-by: Rob Clark <rob@ti.com> (core + omapdrm)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And do a quick pass to adjust them to the last few (years?) of changes
...
This time actually compile-tested ;-)
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- config_cleanup was confused: It claimed that callers need to hold
the modeset lock, but the connector|encoder_cleanup helpers grabbed
that themselves (note that crtc_cleanup did _not_ grab the modeset
lock). Which resulted in all drivers _not_ hodling the lock. Since
this is for single-threaded cleanup code, drop the requirement from
docs and also drop the lock_grabbing from all _cleanup functions.
- Kill the LOCKING section in the doctype, since clearly we're not
good enough to keep them up-to-date. And misleading locking
documentation is worse than useless (see e.g. the comment in the
vmgfx driver about the cleanup mess). And since for most functions
the very first line either grabs the lock or has a WARN_ON(!locked)
the documentation doesn't really add anything.
- Instead put in some effort into explaining the only two special
cases a bit better: config_init and config_cleanup are both called
from single-threaded setup/teardown code, so don't do any locking.
It's the driver's job though to enforce this.
- Where lacking, add a WARN_ON(!is_locked). Not many places though,
since locking around fbdev setup/teardown is through-roughly screwed
up, and so will break almost every single WARN annotation I've tried
to add.
- Add a drm_modeset_is_locked helper - the Grate Modset Locking Rework
will use the compiler to assist in the big reorg by renaming the
mode lock, so start encapsulating things. Unfortunately this ended
up in the "wrong" header file since it needs the definition of
struct drm_device.
v2: Drop most WARNS again - we hit them all over the place, mostly in
the setup and teardown sequences. And trying to fix it up leads to
nice deadlocks, since the locking in the setup code is really
inconsistent.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we seem to have brought order to the GTT barriers, the last one
to review is the terminal barrier before we unbind the buffer from the
GTT. This needs to only be performed if the buffer still resides in the
GTT domain, and so we can skip some needless barriers otherwise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With a fence, we only need to insert a memory barrier around the actual
fence alteration for CPU accesses through the GTT. Performing the
barrier in flush-fence was inserting unnecessary and expensive barriers
for never fenced objects.
Note removing the barriers from flush-fence, which was effectively a
barrier before every direct access through the GTT, revealed that we
where missing a barrier before the first access through the GTT. Lack of
that barrier was sufficient to cause GPU hangs.
v2: Add a couple more comments to explain the new barriers
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have two important transitions of the wedged state in the current
code:
- 0 -> 1: This means a hang has been detected, and signals to everyone
that they please get of any locks, so that the reset work item can
do its job.
- 1 -> 0: The reset handler has completed.
Now the last transition mixes up two states: "Reset completed and
successful" and "Reset failed". To distinguish these two we do some
tricks with the reset completion, but I simply could not convince
myself that this doesn't race under odd circumstances.
Hence split this up, and add a new terminal state indicating that the
hw is gone for good.
Also add explicit #defines for both states, update comments.
v2: Split out the reset handling bugfix for the throttle ioctl.
v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase
error which prevented this patch from actually compiling.
v4: To unify the wedged state with the reset counter, keep the
reset-in-progress state just as a flag. The terminally-wedged state is
now denoted with a big number.
v5: Add a comment to the reset_counter special values explaining that
WEDGED & RESET_IN_PROGRESS needs to be true for the code to be
correct.
v6: Fixup logic errors introduced with the wedged+reset_counter
unification. Since WEDGED implies reset-in-progress (in a way we're
terminally stuck in the dead-but-reset-not-completed state), we need
ensure that we check for this everywhere. The specific bug was in
wait_for_error, which would simply have timed out.
v7: Extract an inline i915_reset_in_progress helper to make the code
more readable. Also annote the reset-in-progress case with an
unlikely, to help the compiler optimize the fastpath. Do the same for
the terminally wedged case with i915_terminally_wedged.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While auditing the code I've noticed one place (the throttle ioctl)
which does not yet wait for the reset handler to complete and doesn't
properly decode the wedge state into -EAGAIN/-EIO. Fix this up by
calling the right helpers. This might explain the oddball "my
compositor just died in a successfull gpu reset" reports. Or maybe not, since
current mesa doesn't use this ioctl to throttle command submission.
The throttle ioctl doesn't take the struct_mutex, so to avoid busy-looping
with -EAGAIN while a reset is in process, check for errors first and wait
for the handler to complete if a reset is pending by calling
i915_gem_wait_for_error.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And to make Ben Widawsky happier, use the gpu_error instead of
the entire device as the argument in some functions.
Drop the outdated comment on ->wedged for now, a follow-up patch will
change the semantics and add a proper comment again.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has been sprinkled all over the place in dev_priv. I think
it'd be good to also move all the code into a separate file like
i915_gem_error.c, but that's for another patch.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tha one is really big, since it contains tons of comments explaining
how things work. Which is nice ;-)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The reasoning behind our code taking two paths depending upon whether or
not we may have been configured for IOMMU isn't clear to me. It should
always be safe to use the pci mapping functions as they are designed to
abstract the decision we were handling in i915.
Aside from simpler code, removing another member for the intel_gtt
struct is a nice motivation.
I ran this by Chris, and he wasn't concerned about the extra kzalloc,
and memory references vs. page_to_phys calculation in the case without
IOMMU.
v2: Update commit message
v3: Remove needs_dmar addition from Zhenyu upstream
This reverts (and then other stuff)
commit 20652097da
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Thu Dec 13 23:47:47 2012 +0800
drm/i915: Fix missed needs_dmar setting
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Squash in follow-up fix to remove the bogus hunk which
deleted the dma_mask configuration for gen6+.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already had a mapping in both (minus the phys_addr in AGP).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And, move it to where the rest of the logic is.
There is some slight functionality changes. There was extra paranoid
checks in AGP code making sure we never do idle maps on gen2 parts. That
was not duplicated as the simple PCI id check should do the right thing.
v2: use IS_GEN5 && IS_MOBILE check instead. For now, this is the same as
IS_IRONLAKE_M but is more future proof. The workaround docs hint that
more than one platform may be effected, but we've never seen such a
platform in the wild. (Rodrigo, Daniel)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1)
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The AVI infoframe is able to inform the display whether the source is
sending full or limited range RGB data.
As per CEA-861 [1] we must first check whether the display reports the
quantization range as selectable, and if so we can set the approriate
bits in the AVI inforframe.
[1] CEA-861-E - 6.4 Format of Version 2 AVI InfoFrame
v2: Give the Q bits better names, add spec chapter information
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_rgb_quant_range_selectable() will report whether the monitor
claims to support for RGB quantization range selection.
The information can be found in the CEA Video capability block.
v2: s/quantzation/quantization/ in the comment
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a new "Automatic" mode to the "Broadcast RGB" range property.
When selected the driver automagically selects between full range and
limited range output.
Based on CEA-861 [1] guidelines, limited range output is selected if the
mode is a CEA mode, except 640x480. Otherwise full range output is used.
Additionally DVI monitors should most likely default to full range
always.
As per DP1.2a [2] DisplayPort should always use full range for 18bpp, and
otherwise will follow CEA-861 rules.
NOTE: The default value for the property will now be "Automatic"
so some people may be affected in case they're relying on the
current full range default.
[1] CEA-861-E - 5.1 Default Encoding Parameters
[2] VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
v2: Use has_hdmi_sink to check if a HDMI monitor is present
v3: Add information about relevant spec chapters
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The RGB color range select bit on the DP/SDVO/HDMI registers
disappeared when PCH was introduced, and instead a new PIPECONF bit
was added that performs the same function.
Add a new INTEL_MODE_LIMITED_COLOR_RANGE private mode flag, and set
it in the encoder mode_fixup if limited color range is requested.
Set the the PIPECONF bit 13 based on the flag.
Experimentation showed that simply toggling the bit while the pipe is
active doesn't work. We need to restart the pipe, which luckily already
happens.
The DP/SDVO/HDMI bit 8 is marked MBZ in the docs, so avoid setting it,
although it doesn't seem to do any harm in practice.
TODO:
- the PIPECONF bit too seems to have disappeared from HSW. Need a
volunteer to test if it's just a documentation issue or if it's really
gone. If the bit is gone and no easy replacement is found, then I suppose
we may need to use the pipe CSC unit to perform the range compression.
v2: Use mode private_flags instead of intel_encoder virtual functions
v3: Moved the intel_dp color_range handling after bpc check to help
later patches
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mappable_end, ie. size is almost always what you want as opposed to the
number of entries. Since we already have that information, we can scrap
the number of entries and only calculate it when needed.
If gtt_start is !0, this will have slightly different behavior. This
difference can only occur in DRI1, and exists when we try to kick out
the firmware fb. The new code seems like a bugfix to me.
The other case where we've changed the behavior is during init we check
the mappable region against our current known upper and lower limits
(64MB, and 512MB). This now matches the comment, and makes things more
convenient after removing gtt_mappable_entries.
Also worth noting is the setting of mappable_end is taken out of setup
because we do it earlier now in the DRI2 case and therefore need to add
that tiny hunk to support the DRI1 IOCTL.
v2: Move up mappable end to before legacy AGP init
v3: Add the dev_priv inclusion here from previous rebase error in patch
5
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: squash in fix for a printk format flag mismatch warning.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is to fix up a build problem with a wireless driver due to the
dynamic-debug patches in this branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have enough info to not use the intel_gtt bridge stuff.
v2: Move setup of mappable_base above the legacy init stuff because we
still need that on older platforms. (Daniel)
v3: Remove the dev_priv hunk which was rebased in by accident
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The purpose of the gtt structure is to help isolate our gtt specific
properties from the rest of the code (in doing so it help us finish the
isolation from the AGP connection).
The following members are pulled out (and renamed):
gtt_start
gtt_total
gtt_mappable_end
gtt_mappable
gtt_base_addr
gsm
The gtt structure will serve as a nice place to put gen specific gtt
routines in upcoming patches. As far as what else I feel belongs in this
structure: it is meant to encapsulate the GTT's physical properties.
This is why I've not added fields which track various drm_mm properties,
or things like gtt_mtrr (which is itself a pretty transient field).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[Ben modified commit messages]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the assertion from the previous patch in place, it should be safe
to get rid gtt_mappable_total. Keeps things saner to not have to track
the same info in two places.
In order to keep the diff as simple as possible and keep with the
existing gtt_setup semantics we opt to keep gtt_mappable_end. It's not
as consistent with the 'total' used in the previous patch, but that can
be fixed later.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[Ben modified commit message]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Both DRI1 and DRI2 can never specify a mappable size which goes past the
GTT size. Don't pretend otherwise.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's duplicated in the more useful gtt_total.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix up some copypaste errors in the PIPESTAT register for VLV.
SPRITE0_FLIP_DONE_INT_EN_VLV is bit 22, not bit 26.
SPRITE0_FLIPDONE_INT_STATUS_VLV is bit 14, not bit 15.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 623000.0/sec.
i3-330m: 748000.0/sec to 789000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Userspace is able to hint to the kernel that its command stream and
auxiliary state buffers already hold the correct presumed addresses and
so the relocation process may be skipped if the kernel does not need to
move any buffers in preparation for the execbuffer. Thus for the common
case where the allotment of buffers is static between batches, we can
avoid the overhead of individually checking the relocation entries.
Note that this requires userspace to supply the domain tracking and
requests for workarounds itself that would otherwise be computed based
upon the relocation entries.
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 632000.0/sec.
i3-330m: 748000.0/sec to 830000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Fixup merge conflict in userspace header due to different
baseline trees.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of passing around the eb-objects hashtable and a separate object
list, we can include the object list into the eb-objects structure for
convenience.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The difference is that the kernel will then know that this memory will
be reclaimable in the near future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the existing checking inside bind_to_gtt() to the more appropriate
layer in order to prevent recreation of the pages after they have been
explicitly truncated.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As a means to investigate some bad system behaviour related to the
purging of the active, inactive and unbound lists, it is useful to be
able to manually control when those lists should be cleared.
v2: use _safe list iterators as we kick objects from the list as we
walk.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a small comment explaining why we don't need to check and
wait for gpu resets, acked by Chris on irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The two functions are rather similar, so merge them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The two functions are rather similar, so merge them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This variable is only used locally in the irq postinstall
functions for ivybridge and ironlake.
Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise it seems like we can get stuck with concurrent waiters.
Right now this /shouldn't/ be a problem, since all pending pageflip
waiters are serialized by the one mode_config.mutex, so there's at
most on waiter. But better paranoid than sorry, since this is tricky
code.
v2: WARN_ON(waitqueue_active) before waiting, as suggested by Chris
Wilson.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel writes:
- seqno wrap fixes and debug infrastructure from Mika Kuoppala and Chris
Wilson
- some leftover kill-agp on gen6+ patches from Ben
- hotplug improvements from Damien
- clear fb when allocated from stolen, avoids dirt on the fbcon (Chris)
- Stolen mem support from Chris Wilson, one of the many steps to get to
real fastboot support.
- Some DDI code cleanups from Paulo.
- Some refactorings around lvds and dp code.
- some random little bits&pieces
* tag 'drm-intel-next-2012-12-21' of git://people.freedesktop.org/~danvet/drm-intel: (93 commits)
drm/i915: Return the real error code from intel_set_mode()
drm/i915: Make GSM void
drm/i915: Move GSM mapping into dev_priv
drm/i915: Move even more gtt code to i915_gem_gtt
drm/i915: Make next_seqno debugs entry to use i915_gem_set_seqno
drm/i915: Introduce i915_gem_set_seqno()
drm/i915: Always clear semaphore mboxes on seqno wrap
drm/i915: Initialize hardware semaphore state on ring init
drm/i915: Introduce ring set_seqno
drm/i915: Missed conversion to gtt_pte_t
drm/i915: Bug on unsupported swizzled platforms
drm/i915: BUG() if fences are used on unsupported platform
drm/i915: fixup overlay stolen memory leak
drm/i915: clean up PIPECONF bpc #defines
drm/i915: add intel_dp_set_signal_levels
drm/i915: remove leftover display.update_wm assignment
drm/i915: check for the PCH when setting pch_transcoder
drm/i915: Clear the stolen fb before enabling
drm/i915: Access to snooped system memory through the GTT is incoherent
drm/i915: Remove stale comment about intel_dp_detect()
...
Conflicts:
drivers/gpu/drm/i915/intel_display.c
We stopped reading FORCEWAKE for posting reads in
commit 8dee3eea3c
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Sat Sep 1 22:59:50 2012 -0700
drm/i915: Never read FORCEWAKE
and started using something from the same cacheline instead. On the
bug reporter's machine this broke entering rc6 states after a
suspend/resume cycle. It turns out reading ECOBUS as posting read
worked fine, while GTFIFODBG did not, preventing RC6 states after
suspend/resume per the bug report referenced below. It's not entirely
clear why, but clearly GTFIFODBG was nowhere near the same cacheline
or address range as FORCEWAKE.
Trying out various registers for posting reads showed that all tested
registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true
work. Conversely, most (but not quite all) registers for which
NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced
bug.
Based on the above, add posting reads on ECOBUS where GTFIFODBG was
previously relied on.
In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as
well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same
address range as FORCEWAKE_VLV.
v2: Add more details to the commit message. No functional changes.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411
Reported-and-tested-by: Alexander Bersenev <bay@hackerdom.ru>
CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
[danvet: add cc: stable and make the commit message a bit clearer that
this is a regression fix and what exactly broke.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the slow path, we are forced to copy the relocations prior to
acquiring the struct mutex in order to handle pagefaults. We forgo
copying the new offsets back into the relocation entries in order to
prevent a recursive locking bug should we trigger a pagefault whilst
holding the mutex for the reservations of the execbuffer. Therefore, we
need to reset the presumed_offsets just in case the objects are rebound
back into their old locations after relocating for this exexbuffer - if
that were to happen we would assume the relocations were valid and leave
the actual pointers to the kernels dangling, instant hang.
Fixes regression from commit bcf50e2775
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun Nov 21 22:07:12 2010 +0000
drm/i915: Handle pagefaults in execbuffer user relocations
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@fwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some machines detect an eDP port even if it's not really there, and eDP
initialization has a fail path for this. Typically such machines have an
LVDS display instead. A regression introduced in
commit 82ed61fa1a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Oct 20 20:57:41 2012 +0200
drm/i915: make edp panel power sequence setup more robust
updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS,
and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display.
Split the power sequencer initialization into two, delaying the register
updates until after we know the eDP is real.
Note: Keep the PP_CONTROL unlocking in the first part, even if it does not
update registers, per the commit message of the above mentioned commit.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601
Reported-and-tested-by: Ryan Coe <ryan@rycomotorsports.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All legitimate users of this function outside ttm_bo.c are gone, now
it's only an implementation detail.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Similar rationale to the identical commit in drm/ttm.
Instead of only waiting for unreservation, we make sure we actually
own the reservation, then retry to get the rest.
Changes since v1:
- Increase the seqno before calling ttm_bo_reserve_slowpath
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Probably not a candidate for stable kernels because of conflicts
in DRM versioning.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a hard lock in the gpu reset code after the
rework for DMA support (0ecebb9e0d
"drm/radeon: switch to a finer grained reset for evergreen")
due to not bailing before the MC shutdown if the relevant engines
are idle.
Discussion:
http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.html
Reported-by: Eldad Zack <eldad@fogrefinery.com>
Tested-by: Eldad Zack <eldad@fogrefinery.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This requires re-use of the seqno, which increases fairness slightly.
Instead of spinning with a new seqno every time we keep the current one,
but still drop all other reservations we hold. Only when we succeed,
we try to get back our other reservations again.
This should increase fairness slightly as well.
Changes since v1:
- Increase val_seq before calling ttm_bo_reserve_slowpath_nolru and
retrying to take all entries to prevent a race.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Instead of dropping everything, waiting for the bo to be unreserved
and trying over, a better strategy would be to do a blocking wait.
This can be mapped a lot better to a mutex_lock-like call.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
With the lru lock no longer required for protecting reservations we
can just do a ttm_bo_reserve_nolru on -EBUSY, and handle all errors
in a single path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
There should no longer be assumptions that reserve will always succeed
with the lru lock held, so we can safely break the whole atomic
reserve/lru thing. As a bonus this fixes most lockdep annotations for
reservations.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
This is temporary until the fence framework can be used. With the
lru/reservation atomicity removal it is possible to see your old
sequence number and the buffer being reserved, leading to erroneously
reporting -EDEADLK.
Workaround it by bumping the sequence number every retry.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
These are useful for investigating hangs involving WAIT_FOR_EVENT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Apply a droplet of Future-Proof in the if-ladder.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a left-over from when udl_get_edid returned the amount of bytes
successfully read, which it no longer does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
The buffer passed to usb_control_msg may end up in scatter-gather list, and
may thus not be on the stack. Having it on the stack usually works on x86, but
not on other archs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
udldrmfb only reads the main EDID block, and if that advertises extensions
the drm_edid code expects them to be present, and starts reading beyond the
buffer udldrmfb passes it.
Although it may be possible to read more EDID info with the udl we simpy don't
know how, and even if trial and error gets it working on one device, that is
no guarantee it will work on other revisions. So this patch does a simple fix
in the form of patching the EDID info to report 0 extension blocks, this
fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes for UMS mode which has been broken for a while plus an rn50 fix
and a dma fix.
* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
radeon/kms: fix dma relocation checking
radeon/kms: force rn50 chip to always report connected on analog output
drm/radeon: fix error path in kpage allocation
drm/radeon: fix a bogus kfree
drm/radeon: fix NULL pointer dereference in UMS mode
Regression fixes since rework mostly.
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/fb: fix crash when different mutex is used to protect same list
drm/nouveau/clock: fix support for more than 2 monitors on nve0
drm/nv50/disp: fix selection of bios script for analog outputs
drm/nv17-50: restore fence buffer on resume
drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards
drm/nouveau: fix nouveau_client allocation failure path
drm/nouveau: don't return freed object from nouveau_handle_create
drm/nouveau/vm: fix memory corruption when pgt allocation fails
drm/nouveau: add locking around instobj list operations
drm/nouveau: do not forcibly power on lvds panels
drm/nouveau/devinit: ensure legacy vga control is enabled during post
Fixes regression introduced in commit 861d2107
"drm/nouveau/fb: merge fb/vram and port to subdev interfaces"
nv50_fb_vram_{new,del} functions were changed to use
nouveau_subdev->mutex instead of the old nouveau_mm->mutex.
nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't
have its own fb_vram_del function, using nv50_fb_vram_del instead.
Because of this, on nvc0 a different mutex ends up being used to protect
additions and deletions to the same list.
This patch is a -stable candidate for 3.7.
Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net>
Reported-by: Roy Spliet <r.spliet@student.tudelft.nl>
Tested-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Fixes regression introduced in commit 70790f4f
"drm/nouveau/clock: pull in the implementation from all over the place"
When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set,
the PLLs it is used for got limited to only the first two VPLLs.
nv50_crtc_set_clock was only called to change VPLLs, so it didn't
limit what it was used for in any way. Since nvc0_clock_pll_set is
used for all PLLs, it has to specify which PLLs the code is used for,
and only listed the first two VPLLs.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735
This patch is a -stable candidate for 3.7.
Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net>
Tested-by: Aleksi Torhamo <aleksi@torhamo.net>
Tested-by: Sean Santos <quantheory@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Analog output number was overwritten by value from digital output path.
Fix it.
Fixes resume from s2ram: https://bugs.freedesktop.org/show_bug.cgi?id=58729
(as stumbled on by J Binder, Pontus Fuchs and me)
Fixes blank screen on module load (reported by Sune Mølgaard).
Fixes regression from commit 186ecad21c
("drm/nv50/disp: move remaining interrupt handling into core").
Reported-by: J Binder <wheel@herr-der-mails.de>
Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Reported-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since commit 5e120f6e4b "drm/nouveau/fence:
convert to exec engine, and improve channel sync" nouveau fence sync
implementation for nv17-50 and nvc0+ started to rely on state of fence buffer
left by previous sync operation. But as pinned bo's (where fence state is
stored) are not saved+restored across suspend/resume, we need to do it
manually.
nvc0+ was fixed by commit d6ba6d215a
"drm/nvc0/fence: restore pre-suspend fence buffer context on resume".
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate
from create/destroy") started to call display init routines on pre-nv50
hardware on module load. But LVDS init code sets driver state in a way
which prevents modesetting code from operating properly.
nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to
NV_DPMS_CLEARED.
drm_crtc_helper_set_mode
nv04_dfp_prepare
nv04_lvds_dpms(DRM_MODE_DPMS_OFF)
nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly
assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too,
so it skips calling some crucial lvds scripts.
Reported-by: Chris Paulson-Ellis <chris@edesix.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Depending on the point of failure, freed object would be returned
or memory leak would happen.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If we return freed vm, nouveau_drm_open will happily call nouveau_cli_destroy,
which will try to free it again.
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes memory corruptions, oopses, etc. when multiple gpuobjs are
simultaneously created or destroyed.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
This fix was put in place to fix a bug where the eDP panel on certain
laptops fails to respond over the aux channel after suspend.
It appears that on some systems (Dell M6600, with LVDS panel) there's a
very bad interaction with the eDP init table that causes the SOR to get
very confused and not drive the panel correctly, leading to bleed.
A DPMS off/on cycle is enough to bring it back, but, this will avoid the
problem by not touching the panel GPIOs at times we're not meant to.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Dave Airlie <airlied@redhat.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were checking the index against the size of the relocation buffer
instead of against the last index. This fix kernel segfault when
userspace submit ill formated command stream/relocation buffer pair.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those rn50 chip are often connected to console remoting hw and load
detection often fails with those. Just don't try to load detect and
report connect.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Index into chunks[] array doesn't look right.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
parser->chunks[.].kpage[.] is not always kmalloc-ed
by the parser initialization, so parser_fini should
not try to kfree it if it didn't allocate it.
This patch fixes a kernel oops that can be provoked
in UMS mode.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In UMS mode parser->rdev is NULL, so dereferencing
will cause an oops.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel writes:
"Pretty much all just major fixes:
- 2 pieces of duct-tape for the ilk bug.
- Sprite regression fixes from Chris.
- OOPS fix for a div-by-zero from Chris, regression due to the modeset
rework in 3.7, now brought to light by a benign change in 3.8.
- Fix interrupted bo pinning, used to work around CS coherency issues on
i830/i845 (kernel also has a w/a newly in 3.8, but pinning is more efficient if
possible)."
This partially reverts
commit 6c085a728c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Aug 20 11:40:46 2012 +0200
drm/i915: Track unbound pages
Closer inspection of that patch revealed a bunch of unrelated changes
in the shrinker:
- The shrinker count is now in pages instead of objects.
- For counting the shrinkable objects the old code only looked at the
inactive list, the new code looks at all bounds objects (including
pinned ones). That is obviously in addition to the new unbound list.
- The shrinker cound is no longer scaled with
sysctl_vfs_cache_pressure. Note though that with the default tuning
value of vfs_cache_pressue = 100 this doesn't affect the shrinker
behaviour.
- When actually shrinking objects, the old code first dropped
purgeable objects, then normal (inactive) objects. Only then did it,
in a last-ditch effort idle the gpu and evict everything. The new
code omits the intermediate step of evicting normal inactive
objects.
Safe for the first change, which seems benign, and the shrinker count
scaling, which is a bit a different story, the endresult of all these
changes is that the shrinker is _much_ more likely to fall back to the
last-ditch resort of idling the gpu and evicting everything. The old
code could only do that if something else evicted lots of objects
meanwhile (since without any other changes the nr_to_scan will be
smaller than the object count).
Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only
dentry/inode object caches should scale their shrinker counts with
vfs_cache_pressure. Originally I've had that change reverted, too. But
Chris Wilson insisted that it's too bogus and shouldn't again see the
light of day.
Hence revert all these other changes and restore the old shrinker
behaviour, with the minor adjustment that we now first scan the
unbound list, then the inactive list for each object category
(purgeable or normal).
A similar patch has been tested by a few people affected by the gen4/5
hangs which started to appear in 3.7, which some people bisected to
the "drm/i915: Track unbound pages" commit. But just disabling the
unbound logic alone didn't change things at all.
Note that this patch doesn't fix the referenced bugs, it only hides
the underlying bug(s) well enough to restore pre-3.7 behaviour. The
key to achieve that is to massively reduce the likelyhood of going
into a full gpu stall and evicting everything.
v2: Reword commit message a bit, taking Chris Wilson's comment into
account.
v3: On Chris Wilson's insistency, do not reinstate the rather bogus
vfs_cache_pressure change.
Tested-by: Greg KH <gregkh@linuxfoundation.org>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=55984
References: https://bugs.freedesktop.org/show_bug.cgi?id=57122
References: https://bugs.freedesktop.org/show_bug.cgi?id=56916
References: https://bugs.freedesktop.org/show_bug.cgi?id=57136
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes an original bug in the sprite code that miscomputed the
source offset into a linear YUV packed framebuffer, that was magnified
into an oops with
commit 5a35e99e81
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Fri Oct 26 18:20:12 2012 +0100
drm/i915: adjust sprite base address
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm update from Dave Airlie:
"Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in.
It's a bit big but its mostly exynos license fix ups and I'd rather
not hold those up since its legally stuff.
Radeon has a couple of fixes from dma engine work, TTM is just a
locking fix, and dma-buf fix has been hanging around and I finally got
a chance to review it."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/ttm: fix fence locking in ttm_buffer_object_transfer
drm/prime: drop reference on imported dma-buf come from gem
drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
drm/exynos: move finish page flip to a common place
drm/exynos: fimd: modify condition in fimd resume
drm/radeon: fix DMA CS parser for r6xx linear copy packet
drm/radeon: split r6xx and r7xx copy_dma functions
drm/exynos: Use devm_clk_get in exynos_drm_gsc.c
drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c
drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c
drm/exynos: Use devm_clk_get in exynos_drm_rotator.c
drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c
drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c
drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
drm/exynos: Remove redundant NULL check
drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c
drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c
drm/exynos: fix gem buffer allocation type checking
drm/exynos: remove needless parenthesis.
drm/exynos: fix incorrect interrupt induced by m2m operation.
...
This proves to be very useful when investigating why code suddenly
started failing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes a regression from
commit 57779d0636
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Oct 31 17:50:14 2012 +0200
drm/i915: Fix display pixel format handling
(which even says that they are supported on Ironlake, and then promptly
rejects then...)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Avoid clobbering adjacent blocks if they happen to expire earlier and
amalgamate together to form the requested hole.
In passing this fixes a regression from
commit ea7b1dd448
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Feb 18 17:59:12 2011 +0100
drm: mm: track free areas implicitly
which swaps the end address for size (with a potential overflow) and
effectively causes the eviction code to clobber almost all earlier
buffers above the evictee.
v2: Check the original hole not the adjusted as the coloring may confuse
us when later searching for the overlapping nodes. Also make sure that
we do apply the range restriction and color adjustment in the same
order for both scanning, searching and insertion.
v3: Send the version that was actually tested.
Note that this seems to be ducttape of decent quality ot paper over
some of our unbind related gpu hangs reported since 3.7. It is not
fully effective though, and certainly doesn't fix the underlying bug.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Added note plus bugzilla link and tested-by.]
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984
Tested-by: Norbert Preining <preining@logic.at>
Acked-by: Dave Airlie <airlied@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Noticed while reviewing the fence locking in the radeon pageflip
handler.
v2: Instead of grabbing the bdev->fence_lock in object_transfer just
move the single callsite of that function a few lines, so that it is
protected by the fence_lock. Suggested by Jerome Glisse.
v3: Fix typo in commit message.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex writes:
A few more fixes for DMA and a mac quirk.
* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
drm/radeon: fix DMA CS parser for r6xx linear copy packet
drm/radeon: split r6xx and r7xx copy_dma functions
Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem
makes memory leak. release function of dma-buf cannot be called because f_count
of dma-buf increased by importing gem and gem ref count cannot be decrease
because of exported dma-buf.
So I add dma_buf_put() for imported gem come from its own gem into each drivers
having prime_import and prime_export capabilities. With this, only gem ref
count is increased if importing gem exported from gem of same driver.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Prevent a divide-by-zero by consistently treating an 'active' CRTC
without a mode set as actually disabled.
This looks to have been first introduced with
commit 2492935248
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jul 2 20:28:59 2012 +0200
drm/i915: read out the modeset hw state at load and resume time
but then combined with
commit b0a2658acb
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 18 09:37:54 2012 +0100
drm/i915: don't disable disconnected outputs
it finally started oopsing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
vga-switcheroo with apple-gmux does not switch correctly on my system. The PCI
configuration space is not restored correctly, resulting in MSI not working after switch.
Only useful item in dmesg is:
[ 33.922807] radeon 0000:01:00.0: Refused to change power state, currently in D3
I did some testing, dumping the difference in ms between first succesful switch
from D3 to D0, and it seems that there is slightly more than 20 ms difference when
the device is re-enabled through vga-switcheroo.
So bump the re-enable d3 delay to 20 ms to handle this, which fixes msi not working
on my system after switcheroo-ing. Default d3_delay value is PCI_PM_D3_WAIT, 10 ms.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9756fe38d1.
The bogus lvds output is actually a lvds->hdmi bridge, which we don't
really support. But unconditionally disabling it breaks some existing
setups.
Reported-by: John Tapsell <johnflux@gmail.com>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As along the error path we do not correct the user pin-count for the
failure, we may end up with userspace believing that it has a pinned
object at offset 0 (when interrupted by a signal for example).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch implements the exynos_drm_crtc_finish_pageflip in
exynos_drm_crtc.c. This avoids the duplication of same code
in mixer, fimd and vidi.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Stephane Marchesin <marcheu@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If fimd is runtime suspended (by DPMS OFF), fimd_suspend does not
call fimd_activate(false) and just returns. Similarily the check in
fimd_resume should not resume if previously runtime_suspended.
Instead the existing check does the opposite. So if fimd was not
runtime suspended, suspend will turn off fimd but resume will not turn
it on. This patch fixes this issue by reversing the condition.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull radeon and minor nouveau fixes from Dave Airlie:
"Just a radeon pull from Alex, fixes a few regressions since 3.7 and
reworks some of the reset handling, and two minor nouveau fixes I
found on the list, Ben will be back next week to take care of the
couple of larger nouveau patches that I see outstanding."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix init with agpgart-uninorth
drm: nouveau: Fix build warning seen if HWMON is undefined
drm/radeon: switch to a finer grained reset for SI (v2)
drm/radeon: switch to a finer grained reset for cayman/TN
drm/radeon: switch to a finer grained reset for evergreen
drm/radeon: switch to a finer grained reset for r6xx/7xx
drm/radeon: add GPU reset flags
drm/radeon: fix typo in evergreen dma fence
drm/radeon: Properly handle DDC probe for DP bridges
drm/radeon: reset dma engine on gpu reset (v2)
drm/radeon: print dma status reg on lockup (v2)
drm/radeon: improve ring debugfs printing
drm/radeon: add debugfs file for dma rings
drm/radeon/r6xx: fix DMA engine for ttm bo transfers
drm/radeon: add connector table for Mac G4 Silver
- r6xx actually uses a slightly different packet format,
although both formats seem to work ok.
- r7xx doesn't have the count multiple of 2 limitation.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This eliminates the need for explicit clk_put and makes the
cleanup and exit path code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_request_and_ioremap API checks for NULL. Hence explicit
NULL check is not necessary. Saves some code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_* APIs are device managed and get freed automatically when the
device detaches. Thus explicit freeing is not needed. This saves some
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This eliminates the need for explicit clk_put and makes the
cleanup and exit path code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_request_and_ioremap API checks for NULL. Hence explicit
NULL check is not necessary. Saves some code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_* APIs are device managed and get freed automatically when the
device detaches. Thus explicit freeing is not needed. This saves some
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This eliminates the need for explicit clk_put and makes the
cleanup and exit path code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_request_and_ioremap API checks for NULL. Hence explicit
NULL check is not necessary. Saves some code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_* APIs are device managed and get freed automatically when the
device detaches. Thus explicit freeing is not needed. This saves some
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_kzalloc makes the code simpler by eliminating the need for
explicit freeing.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes gem buffer allocation type checking.
EXYNOS_BO_CONTIG has 0 so the checking should be fixed
to 'if (!(flags & EXYNOS_BO_NONCONTIG))'
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch removes needless parenthesis.
This was pointed out but in case of fimc side. we missed it.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes incorrect interrupt induced by m2m operation.
the m2m operation calls s/w reset every frame but there is the case that
the interrupt to m2m operation occures after s/w reset sometimes.
So this patch makes dma and capture operations stop at s/w reset
to avoid incorrect interrupt.
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes color bar pattern register because we don't use the register anymore.
because it doesn't support color bar feature for writeback operation.
camera driver only supports color bar feature. but IPP doesn't support camera driver.
Signed-off-by: JoongMock Shin <jmock.shin@samsung.com>
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch cleanup corrects some comments to abbreviation.
We would like to prevent it stands misunderstood.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes erroneous register read.
reall function needs register base address + offset but
exynos_drm_gsc module used only offset to read a register.
so this patch uses gsc_read function instead of readl.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch considers both case of vflip and hflip.
If we want that the contents in buffer to be rotated to 180 degree,
then we can use h,vflip or 180 degree.
Changelog v2:
- added EXYNOS_DRM_FLIP_BOTH enum value to avoid build warnning.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes property error handling. because property couldn't be NULL.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch change current command name from cmd to c_node.
because we are using the member name, 'cmd', for command control ioctl in another structure.
so, this patch changes it to c_node to avoid such confusing.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes the issue that when buffer allocation is requested
without iommu, the allocation is failed.
Without iommu, dma_alloc_attrs function allocates some memory region
and returns cpu address so this patch makes the cpu address to be set
to buf->kvaddr correctly.
Changelog v2:
- fix buffer free
. Without iommu, dma_free_attrs function requires kernel space address
as argument. So it changes the argument, buf->pages to buf->kvaddr.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch changes file license to GPL
Most of exynos files had been copied from some random
file and not updated correctly. So this patch corrects
the file license.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch considers no iommu support to kernel space mapping
of console framebuffer.
Without iommu, we get physical address instead of device address
after dma_alloc_attrs function is called. So we should consider
the case without iommu when it maps console framebuffer with
kernel space.
Changelog v2:
- calll vunmap function only with iommu support.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Check that the AGP aperture can be mapped. This follows a similar change
done for Radeon (commit 365048ff, drm/radeon: AGP memory is only I/O if
the aperture can be mapped by the CPU.).
The patch fixes the following error seen on G5 iMac:
nouveau E[ DRM] failed to create kernel channel, -12
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58806
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix:
nouveau_pm.c: In function ‘nouveau_hwmon_init’:
nouveau_pm.c:703:24: warning: unused variable ‘therm’ [-Wunused-variable]
Introduced by commit 095f979a (drm/nouveau/pm: fix build with HWMON off) which
fixed a build error but introduced a build warning.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No change in functionality as we currently set all the reset
flags.
v2: fix typo
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No change in functionality as we currently set all the reset
flags.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No change in functionality as we currently set all the reset
flags.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No change in functionality as we currently set all the reset
flags.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The idea here is to move to a finer grained reset.
In some cases we may not need reset every block, and
in other cases we may not need to re-init the entire
asic.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DDC information can be accessed using AUX CH
Fixes failure to probe monitors on some systems with
DP bridge chips.
agd5f: minor fixes
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This try to reset the dma engine when performing gpu reset. Hopefully
bringing back the gpu dma engine in sane state.
v2: agd5f: fix dma reset on cayman/TN, add support for SI
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To help debug dma related lockup.
v2: agd5f: update SI as well
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print 32dword before last know rptr as problem most likely comes
from previous command. Also small cosmetic change to the printing.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
count must be a multiple of 2. Fixes crashes on
R6xx chips reported by a number of people.
Cc: Borislav Petkov <bp@alien8.de>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apple cards do not provide data tables in the vbios
so we have to hard code the connector parameters
in the driver.
Reported-by: Albrecht Dreß <albrecht.dress@arcor.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 83c0bcb694.
Lucas pointed out this was a mistake, and I missed the discussion,
so just revert it out to save a rebase.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The intention is to program exactly WIN_A, not WIN_A and possibly
others.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no gem.c anymore, those functions are implemented by the
drm_cma_helpers now.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The 720p and 1080p entries are completely redundant, as we are matching
the table entries against <=pclk.
Also generalize the comment, as we are using those table entries even
when driving other modes than the standard TV ones.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Window properties are programmed through a shared aperture and have to
happen atomically. Also we do the read-update-write dance on some of the
shared regs.
To make sure that different functions don't stumble over each other
protect the register access with a mutex.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No real problem for now, as nothing is using this, but leaving it
unitialized is asking for trouble later on.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes wrong picture offset observed when using HDMI output with a
Technisat HD TV.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Mark Zhang <markz@nvidia.com>
Tested-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some fixes for 3.8:
- Watermark fixups from Chris Wilson (4 pieces).
- 2 snb workarounds, seem to be recently added to our internal DB.
- workaround for the infamous i830/i845 hang, seems now finally solid!
Based on Chris' fix for SNA, now also for UXA/mesa&old SNA.
- Some more fixlets for shrinker-pulls-the-rug issues (Chris&me).
- Fix dma-buf flags when exporting (you).
- Disable the VGA plane if it's enabled on lid open - similar fix in
spirit to the one I've sent you last weeek, BIOS' really like to mess
with the display when closing the lid (awesome debug work from Krzysztof
Mazur).
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: disable shrinker lock stealing for create_mmap_offset
drm/i915: optionally disable shrinker lock stealing
drm/i915: fix flags in dma buf exporting
i915: ensure that VGA plane is disabled
drm/i915: Preallocate the drm_mm_node prior to manipulating the GTT drm_mm manager
drm: Export routines for inserting preallocated nodes into the mm manager
drm/i915: don't disable disconnected outputs
drm/i915: Implement workaround for broken CS tlb on i830/845
drm/i915: Implement WaSetupGtModeTdRowDispatch
drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabled
drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations
drm/i915: Clear self-refresh watermarks when disabled
drm/i915: Double the cursor self-refresh latency on Valleyview
drm/i915: Fixup cursor latency used for IVB lp3 watermarks
Misc fixes for reset and new packets for userspace usage.
* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list
drm/radeon: add support for MEM_WRITE packet
drm/radeon: restore modeset late in GPU reset path
drm/radeon: avoid deadlock in pm path when waiting for fence
drm/radeon: don't leave fence blocked process on failed GPU reset
Modesetting seems to work alright, as does graphics (using binary driver
fuc from nve7...).
Lots to be done no doubt, but this'll get an image on the screen for
people.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Note: This patch also adds a little helper intel_crtc_restore_mode for
the common case where we do a full modeset but with the same
parameters, e.g. to undo bios damage or update a property.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Added note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The iomapping of the register region has historically been a uint32_t
for the obvious reason that our PTE size was always 4b. In the future
however, we cannot make this assumption.
By making the type void, it makes the upcoming pointer math we will do
much easier, and hopefully gives the compiler opportunities to warn us
when we do stupid things.
v2: Cast to __iomem, caught by Ville
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Fixup __iomem issue for real.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This removes an unused field from the AGP structure and moves it into
the dev_priv structure (with a slightly better name). This builds upon
the kill-agp series already merged.
GSM is a well defined term in the bspec:
GSM: Graphics Stolen Memory
GTT stolen space is defined for storage of the GFX GTT entries in
physical memory. IA can not access GSM directly , it can only access via
GTTMMADR. GT can access GSM directly or through GTTMMADR.
This is not the entire stolen space.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This really should have been part of the kill agp series.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The mmap offset structure is not part of the drm/i915 code, but
provided by gem helpers. To avoid leaky abstractions (by either
depending upon implementation details of said helper wrt to
preallocations, or reimplementing it in our code and so fuzzing
around in internal details of that helpr) simply disable
the shrinker lock stealing accross calls into the helper functions.
This should fix igt/gem_tiled_swapping.
v2: Fix cleanup path confusion bemoaned by Chris Wilson.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 5774506f15
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Nov 21 13:04:04 2012 +0000
drm/i915: Borrow our struct_mutex for the direct reclaim
added a nice trick to steal the struct_mutex lock in the shrinker if
it's the current task holding it. But this also caused the requirement
that every place which allocates memory needs to be careful about the
gem state of objects, since the shrinker could have pulled the rug out
from under it. We've usually solved this by carefully preallocating
things or ensure that buffers are pinned already.
But the shrinker also reaps mmap offset, so allocating those needs to
be careful, too. Now that code has been factored out into some common
helpers, so either we have fragile code depending upon the common
helper not doing something we don't want it to do. Or we need to
reimplement the mmap offset creation and so also leak implementation
details into our code.
Since this all results in leaky abstraction, cop out by disabling the
lock borrowing trick while calling down into the helpers. That way our
craziness is nicely confined to files in drm/i915.
v2: Split out the change to create_mmap_offset as request by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As pointed out by Seung-Woo Kim this should have been
passing flags like nouveau/radeon have.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm bugfix from Dave Airlie:
"Just a single urgent regression fix, seeing a few wierd behaviours I'd
like not to persist."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling
To make it easier to debug some lockup from userspace add support
to MEM_WRITE packet.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modeset path seems to conflict sometimes with the memory management
leading to kernel deadlock. This move modesetting reset after GPU
acceleration reset.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
radeon_fence_wait_empty_locked should not trigger GPU reset as no
place where it's call from would benefit from such thing and it
actually lead to a kernel deadlock in case the reset is triggered
from pm codepath. Instead force ring completion in place where it
makes sense or return early in others.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Force all fence to signal if GPU reset failed so no process get stuck
on waiting fence.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some broken systems (like HP nc6120) in some cases, usually after LID
close/open, enable VGA plane, making display unusable (black screen on LVDS,
some strange mode on VGA output). We used to disable VGA plane only once at
startup. Now we also check, if VGA plane is still disabled while changing
mode, and fix that if something changed it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This debugs entry can be used to set arbitrary value to next_seqno.
Use i915_gem_set_seqno instead of poking next_seqno.
v2: nasty details of next_seqno and last_seqno handling
moved inside i915_gem_set_seqno as suggested by Chris Wilson.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function can be used to set the driver's next_seqno
to arbitrary value.
i915_gem_set_seqno() will idle the gpu, retire outstanding
requests, clear the semaphore mailboxes and set the hardware
status page's seqno index.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation for setting the seqno to arbitrary value on init or
through debugfs. We need to always clear the semaphores and set the
hws page seqno index by calling intel_ring_init_seqno().
v2: rewrote the commit message as suggested by Chris Wilson.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Hardware status page needs to have proper seqno set
as our initial seqno can be arbitrary. If initial seqno is close
to wrap boundary on init and i915_seqno_passed() (31bit space)
refers to hw status page which contains zero, errorneous result
will be returned.
v2: clear mboxes and set hws page directly instead of going
through rings. Suggested by Chris Wilson.
v3: hws needs to be updated for all gens. Noticed by Chris
Wilson.
References: https://bugs.freedesktop.org/show_bug.cgi?id=58230
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation for setting per ring initial seqno values
add ring::set_seqno().
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we may reap neighbouring objects in order to free up pages for
allocations, we need to be careful not to allocate in the middle of the
drm_mm manager. To accomplish this, we can simply allocate the
drm_mm_node up front and then use the combined search & insert
drm_mm routines, reducing our code footprint in the process.
Fixes (partially) i-g-t/gem_tiled_swapping
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Again fixup atomic bikeshed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Required by i915 in order to avoid the allocation in the middle of
manipulating the drm_mm lists.
Use a pair of stubs to preserve the existing EXPORT_SYMBOLs for
backporting; to be removed later.
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: bikeshedded-away the atomic parameter, it's not yet used
anywhere.]
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This piece of neat lore has been ported painstakingly and bug-for-bug
compatible from the old crtc helper code.
Imo it's utter nonsense.
If you disconnected a cable and before you reconnect it, userspace (or
the kernel) does an set_crtc call, this will result in that connector
getting disabled. Which will result in a nice black screen when
plugging in the cable again.
There's absolutely no reason the kernel does such policy enforcements
- if userspace tries to set up a mode on something disconnected we
might fail loudly (since the dp link training fails), but silently
adjusting the output configuration behind userspace's back is a recipe
for disaster. Specifically I think that this could explain some of our
MI_WAIT hangs around suspend, where userspace issues a scanline wait
on a disable pipe. This mechanisims here could explain how that pipe
got disabled without userspace noticing.
Note that this fixes a NULL deref at BIOS takeover when the firmware
sets up a disconnected output in a clone configuration with a
connected output on the 2nd pipe: When doing the full modeset we don't
have a mode for the 2nd pipe and OOPS. On the first pipe this doesn't
matter, since at boot-up the fbdev helpers will set up the choosen
configuration on that on first. Since this is now the umptenth bug
around handling this imo brain-dead semantics correctly, I think it's
time to kill it and see whether there's any userspace out there which
relies on this.
It also nicely demonstrates that we have a tiny window where DP
hotplug can still kill the driver.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58396
Cc: stable@vger.kernel.org
Tested-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need to clean up the overlay first, before taking down the
stolen memory allocator.
This regression has been introducec in
commit 8040513870
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 15 11:32:29 2012 +0000
drm/i915: Allocate overlay registers from stolen memory
v2: Rework the patch a bit as suggested by Chris Wilson:
- move the overlay teardown up, into the modeset cleanup
- move the stolen mm takedown into i915_gem_cleanup_stolen
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that Chris Wilson demonstrated that the key for stability on early
gen 2 is to simple _never_ exchange the physical backing storage of
batch buffers I've tried a stab at a kernel solution. Doesn't look too
nefarious imho, now that I don't try to be too clever for my own good
any more.
v2: After discussing the various techniques, we've decided to always blit
batches on the suspect devices, but allow userspace to opt out of the
kernel workaround assume full responsibility for providing coherent
batches. The principal reason is that avoiding the blit does improve
performance in a few key microbenchmarks and also in cairo-trace
replays.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet:
- Drop the hunk which uses HAS_BROKEN_CS_TLB to implement the ring
wrap w/a. Suggested by Chris Wilson.
- Also add the ACTHD check from Chris Wilson for the error state
dumping, so that we still catch batches when userspace opts out of
the w/a.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull DRM updates from Dave Airlie:
"This is the one and only next pull for 3.8, we had a regression we
found last week, so I was waiting for that to resolve itself, and I
ended up with some Intel fixes on top as well.
Highlights:
- new driver: nvidia tegra 20/30/hdmi support
- radeon: add support for previously unused DMA engines, more HDMI
regs, eviction speeds ups and fixes
- i915: HSW support enable, agp removal on GEN6, seqno wrapping
- exynos: IPP subsystem support (image post proc), HDMI
- nouveau: display class reworking, nv20->40 z compression
- ttm: start of locking fixes, rcu usage for lookups,
- core: documentation updates, docbook integration, monotonic clock
usage, move from connector to object properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (590 commits)
drm/exynos: add gsc ipp driver
drm/exynos: add rotator ipp driver
drm/exynos: add fimc ipp driver
drm/exynos: add iommu support for ipp
drm/exynos: add ipp subsystem
drm/exynos: support device tree for fimd
radeon: fix regression with eviction since evict caching changes
drm/radeon: add more pedantic checks in the CP DMA checker
drm/radeon: bump version for CS ioctl support for async DMA
drm/radeon: enable the async DMA rings in the CS ioctl
drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
drm/radeon: fix htile buffer size computation for command stream checker
drm/radeon: fix fence locking in the pageflip callback
drm/radeon: make indirect register access concurrency-safe
drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
drm/exynos: support extended screen coordinate of fimd
drm/exynos: fix x, y coordinates for right bottom pixel
drm/exynos: fix fb offset calculation for plane
...
I'm not really sure, since the w/a entry is as thin on details as
ever, and Bspec doesn't say anything about it. But I've figured only
dispatching to rows 0&1 instead of all four should be the right thing
for GT1.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add the missing snb server GT1 to the check, spotted by Chris
Wilson.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Quoting from Bspec, 3D_CHICKEN1, bit 10
This bit needs to be set always to "1", Project: DevSNB "
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ilk+ somehow used #defines in near the PIPESTAT definitions, which
decently confused me. Earlier platforms called it BPP instead of
BPC. Clean this all up.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So we can de-duplicate code that's inside intel_dp_start_link_train
and intel_dp_complete_link_train.
V2: Rebase since patch 3/5 was discarded.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Don't check the CPU, it doesn't have any PCH transcoder.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As the stolen memory region will contain the contents of whatever was
last there, it invariably contains garbage. To be consistent with the
shmemfs backed fb and the expectations of the fb layer, we need to clear
the fb prior to installing it as an fbcon.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58111
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fixup sparse __iomem confusion reported by Wu Fengguang.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only the intel_crtc->active is accurate at the point where we wish to
perform WM computations, so use it instead of crtc->enabled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we elect to disable self-refresh as they require too many FIFO
entries, clear the values prior to writing them into the registers. If
they are too large they may occupy more bits than available and so
corrupt neighbouring WM values.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It operates at twice the declared latency, so double the latency value
used for the cursor watermark calculation.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50248
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It operates at twice the declared latency, so adjust the computation to
avoid potential flicker at low power.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50248
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We ignore all the user requests to handle flushing to the GTT domain if
the user requests such on a snoopable bo, and as such access through the
GTT to such pages remains incoherent. The specs even warn that such
behaviour is undefined - a strong reason never to do so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel writes:
A few leftover fixes for 3.8:
- VIC support for hdmi infoframes with the associated drm helper, fixes
some black TVs (Paulo Zanoni)
- Modeset state check (and fixup if the BIOS messed with the hw) for
lid-open. modeset-rework fallout. Somehow the original reporter went
awol, so this stalled for way too long until we've found a new
victim^Wreporter with broken BIOS.
- seqno wrap fixes from Mika and Chris.
- Some minor fixes all over from various people.
- Another race fix in the pageflip vs. unpin code from Chris.
- hsw vga resume support and a few more fdi link fixes (only used for vga
on hsw) from Paulo.
- Regression fix for DMAR from Zhenyu Wang - I've scavenged memory from my
DMAR for a while and it broke right away :(
- Regression fix from Takashi Iwai for ivb lvds - some w/a needs to be
(partially) moved back into place. Note that these are regressions in
-next.
- One more fix for ivb 3 pipe support - it now actually seems to work.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (25 commits)
drm/i915: Fix missed needs_dmar setting
drm/i915: Fix shifted screen on top of LVDS on IVY laptop
drm/i915: disable cpt phase pointer fdi rx workaround
drm/i915: set the LPT FDI RX polarity reversal bit when needed
drm/i915: add lpt_init_pch_refclk
drm/i915: add support for mPHY destination on intel_sbi_{read, write}
drm/i915: reject modes the LPT FDI receiver can't handle
drm/i915: fix hsw_fdi_link_train "retry" code
drm/i915: Close race between processing unpin task and queueing the flip
drm/i915: fixup l3 parity sysfs access check
drm/i915: Clear the existing watermarks for g4x when modifying the cursor sr
drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardware
drm/i915: Don't allow ring tail to reach the same cacheline as head
drm/i915: Decouple the object from the unbound list before freeing pages
drm/i915: Set sync_seqno properly after seqno wrap
drm/i915: Include the last semaphore sync point in the error-state
drm/i915: Rearrange code to only have a single method for waiting upon the ring
drm/i915: Simplify flushing activity on the ring
drm/i915: Preallocate next seqno before touching the ring
drm/i915: force restore on lid open
...
Inki writes:
"- add dmabuf attach/detach feature
. This patch would resolve performance deterioration issue
when v4l2-based driver is using the buffer imported from gem.
- drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
. With gem allocation, kernel space mapping isn't allocated and
also physical pages aren't mapped with the kernel space.
The physical pages are mapped with kernel space though vmap
function only for console framebuffer.
- add the below two patches I missed.
drm: exynos: moved exynos drm device registration to drm driver
drm: exynos: moved exynos drm hdmi device registration to drm driver
- add IPP subsystem framework and its-based device drivers.
. This patch set includes fimc, rotator and gsc drivers to perform
image scaling, rotation and color space conversion.
- add runtime pm support to hdmi driver.
- And fixups and cleanups."
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (30 commits)
drm/exynos: add gsc ipp driver
drm/exynos: add rotator ipp driver
drm/exynos: add fimc ipp driver
drm/exynos: add iommu support for ipp
drm/exynos: add ipp subsystem
drm/exynos: support device tree for fimd
drm/exynos: support extended screen coordinate of fimd
drm/exynos: fix x, y coordinates for right bottom pixel
drm/exynos: fix fb offset calculation for plane
drm/exynos: hdmi: Fix potential NULL pointer dereference error
drm/exynos: hdmi: Add CONFIG_OF and use of_match_ptr() macro
drm/exynos: add support for hdmiphy power control for exynos5
drm/exynos: add runtime pm support for mixer
drm/exynos: added runtime pm support for hdmi
drm/exynos: fix allocation and cache mapping type
drm/exynos: reorder framebuffer init sequence
drm/exynos/iommu: fix return value check in drm_create_iommu_mapping()
drm/exynos: remove unused vaddr member
drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
drm/exynos: add exception codes to exynos_drm_fbdev_create()
...
This patch adds IPP subsystem-based gsc driver for exynos5 series.
GSC is stand for General SCaler and supports the following features:
- image scaler/rotator/crop/flip/csc and input/output DMA operations.
- image rotation and image effect functions.
- writeback and display output operations.
- M2M operation to crop, scale, rotation and csc.
The below is GSC hardware path:
Memory------->GSC------>Memory
FIMD--------->GSC------>HDMI
FIMD--------->GSC------>Memory
Memory------->GSC------>FIMD, Mixer
This driver is registered to IPP subsystem framework to be used by user side
and user can control the GSC hardware through some interfaces of IPP subsystem
framework.
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
This patch adds IPP subsystem-based rotator driver.
And Rotator supports the following features.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
. as limitaions, the pixel format to source buffer should be
same as the one to destination buffer and no scaler.
This driver is registered to IPP subsystem framework to be used by user side
and user can control the Rotator hardware through some interfaces of IPP
subsystem framework.
Changelog v6:
- fix build warning.
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
FIMC is stand for Fully Interfactive Mobile Camera and
supports image scaler/rotator/crop/flip/csc and input/output DMA operations
and also supports writeback and display output operations.
This driver is registered to IPP subsystem framework to be used by user side
and user can control the FIMC hardware through some interfaces of IPP subsystem
framework.
Changelog v6:
- fix build warning.
Changelog v1 ~ v5:
- add comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds iommu support for IPP subsystem framework.
For this, it adds subdrv_probe/remove callback to enable or
disable ipp iommu.
We can get or put device address to a gem handle from user
through exynos_drm_gem_get/put_dma_addr().
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds Image Post Processing(IPP) support for exynos drm driver.
IPP supports image scaler/rotator and input/output DMA operations
using IPP subsystem framework to control FIMC, Rotator and GSC hardware
and supports some user interfaces for user side.
And each IPP-based drivers support Memory to Memory operations
with various converting. And in case of FIMC hardware, it also supports
Writeback and Display output operations through local path.
Features:
- Memory to Memory operation support.
- Various pixel formats support.
- Image scaling support.
- Color Space Conversion support.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
- Writeback operation support to display blended image of FIMD fifo on screen
A summary to IPP Subsystem operations:
First of all, user should get property capabilities from IPP subsystem
and set these properties to hardware registers for desired operations.
The properties could be pixel format, position, rotation degree and
flip operation.
And next, user should set source and destination buffer data using
DRM_EXYNOS_IPP_QUEUE_BUF ioctl command with gem handles to source and
destinition buffers.
And next, user can control user-desired hardware with desired operations
such as play, stop, pause and resume controls.
And finally, user can aware of dma operation completion and also get
destination buffer that it contains user-desried result through dequeue
command.
IOCTL commands:
- DRM_EXYNOS_IPP_GET_PROPERTY
. get ipp driver capabilitis and id.
- DRM_EXYNOS_IPP_SET_PROPERTY
. set format, position, rotation, flip to source and destination buffers
- DRM_EXYNOS_IPP_QUEUE_BUF
. enqueue/dequeue buffer and make event list.
- DRM_EXYNOS_IPP_CMD_CTRL
. play/stop/pause/resume control.
Event:
- DRM_EXYNOS_IPP_EVENT
. a event to notify dma operation completion to user side.
Basic control flow:
Open -> Get properties -> User choose desired IPP sub driver(FIMC, Rotator
or GSCALER) -> Set Property -> Create gem handle -> Enqueue to source and
destination buffers -> Command control(Play) -> Event is notified to User
-> User gets destinition buffer complated -> (Enqueue to source and
destination buffers -> Event is notified to User) * N -> Queue/Dequeue to
source and destination buffers -> Command control(Stop) -> Free gem handle
-> Close
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This adds the of_match_table to exynos-drm fimd driver to be probed from
the device tree.
Changelog v2:
- fix build error without CONFIG_OF.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Since 0d0b3e7443
drm/radeon: use cached memory when evicting for vram on non agp
evicting from TTM would try and evict to TTM instead of system,
not so good.
This should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58272
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables the functionality added in the previous
patches. Userspace acceleration drivers can use the
CS ioctl to submit command buffers to the async DMA
rings.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.
v2: fix address bounds checking
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.
v2: fix address bounds checking, reloc indexing
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the size computation of the htile buffer.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to hold bdev->fence_lock while grabbing a reference to
the fence, to prevent concurrent clearing/changing of the
ttm_bo->sync_obj field.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the new per-crtc locking mutliple set-cursor calls could happen
in parallel. Out of sheer paranoia I've opted for an irqsave spinlock.
But if there's indeed an access from interrupt contexts to these regs
it's already broken with the old code, so this can likely just be
reduced to a normal spinlock. Otoh the pageflip completion happens
from the vblank irq handler ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just refactoring to make the next patche simpler. Now all indirect register
access in the new modesetting driver should go through the r100_mm_(w|r)reg
fucntions.
RADEON_READ_MM from the old driver seems to be totally unused, so just kill
it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function doesn't use any of the registers mentioned, nor does it
return true or false. Hard to do worse. Remove it, the function is
absolutely descriptive enough to not need any comment.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
CPT+ PCHs have different bit definition to read the HPD live status. I
don't have an ILK with digital ports handy, which is why this patch is
separate from the CPT+ implementation. If the docs don't lie, it should
all be fine though.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Moving the DPCD just after a successful read will allow to:
- log all DPCD reads (eDP ones, changes signalled by HPD IRQ)
- don't log it if we haven't been able to read it
v2: Be sure to log the DPCD when a downstream port does not have HPD
support and the branch device asserts HPD (Jani Nikula)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like:
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Wed Dec 12 19:37:22 2012 +0000
drm/i915/hdmi: Read the HPD status before trying to read the EDID
But this time for DiplayPort.
v2: Adapt to the ibx_ name change and don't add commit hash (Chris
Wilson, Jani Nikula)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If you unplug the hdmi connector slowly enough, the hotplug interrupt
fires but then the kernel code tries to read the EDID and succeeds
(because the connector is still half connected, the HPD pin is shorter
than the others, and DDC works). Since EDID succeeds it thinks the
monitor is still connected.
To prevent that, read the live HPD status in the hotplug handler before
trying to read the EDID.
v2: Rename the function to ibx_ (Chris Wilson)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55372
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Those status bits don't follow the usual pattern: _MASK (those bits are
write 1 to clear, useful to select the value we want to read) and the
values shifted by the same amount.
Cleaned that that up when poking at the register for testing purposes,
might as well upstream that cleanup.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The x, y coordinates of right bottom pixel cannot be negative numbers.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no any reason to change fb offset when CRTC is out of screen.
Also, this fixes a typing error.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Ben Widawsky