Commit 3d1387b3b8 ("media: vidtv: fix some warnings") replaced
the unused flexible array member at the end of struct vidtv_mpeg_ts
with a pointer. This broke the 188-byte alignment since the struct
no longer was 4 bytes in size.
Fix this by removing this field entirely.
Fixes: 3d1387b3b8 ("media: vidtv: fix some warnings")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PMT write function was refactored and this broke the CRC computation.
Fix it.
Fixes: db9569f67e ("media: vidtv: cleanup PMT write table function")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the disconnect error injection control is set, then besides
faking unregistering the device nodes, also call v4l2_event_wake_all()
to ensure any userspace applications will wake up as per a 'normal'
unregister.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mi60
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some rework at the uAPI pixel format docs
- the smiapp driver has started to gain support for MIPI CSS camera
sensors and was renamed
- two new sensor drivers: ov02a10 and ov9734
- Meson gained a driver for the 2D acceleration unit
- Rockchip rkisp1 driver was promoted from staging
- Cedrus driver gained support for VP8
- two new remote controller keymaps were added
- the usual set of fixes cleanups and driver improvements
* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
media: ccs: Add support for obtaining C-PHY configuration from firmware
media: ccs-pll: Print pixel rates
media: ccs: Print written register values
media: ccs: Add support for DDR OP SYS and OP PIX clocks
media: ccs-pll: Add support for DDR OP system and pixel clocks
media: ccs: Dual PLL support
media: ccs-pll: Add trivial dual PLL support
media: ccs-pll: Separate VT divisor limit calculation from the rest
media: ccs-pll: Fix VT post-PLL divisor calculation
media: ccs-pll: Make VT divisors 16-bit
media: ccs-pll: Rework bounds checks
media: ccs-pll: Print relevant information on PLL tree
media: ccs-pll: Better separate OP and VT sub-tree calculation
media: ccs-pll: Check for derating and overrating, support non-derating sensors
media: ccs-pll: Split off VT subtree calculation
media: ccs-pll: Add C-PHY support
media: ccs-pll: Add sanity checks
media: ccs-pll: Add support flexible OP PLL pixel clock divider
media: ccs-pll: Support two cycles per pixel on OP domain
media: ccs-pll: Add support for extended input PLL clock divider
...
As reported by sparse:
drivers/media/test-drivers/vidtv/vidtv_ts.h:47:47: warning: array of flexible structures
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: warning: incorrect type in argument 3 (different base types)
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: expected unsigned short [usertype] service_id
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: got restricted __be16 [usertype] service_id
drivers/media/test-drivers/vidtv/vidtv_s302m.c:471 vidtv_s302m_encoder_init() warn: possible memory leak of 'e'
Address such warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The 'disconnect' error injection functionality suffered from bit rot.
New device nodes were added without updating vivid_user_gen_s_ctrl(), so
that function had to be updated for the new device nodes.
Also, vivid didn't check if specific device nodes were actually ever
created, so the vivid_is_last_user() would fail on that (it would return
true instead of false in that case).
Finally, selecting Disconnect, then unbind the vivid driver would fail
since the remove() would think that the device nodes were already
unregistered. Keep track of whether disconnect was pressed and re-register
the device nodes in remove() before doing the real unregister.
[hverkuil: unsigned uses -> unsigned int uses]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (fwht-ctrls.h).
Now, the FWHT stateless controls is ready to be part
of the stable uAPI.
While not too late:
- Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS.
- Move the contents of fwht-ctrls.h to v4l2-controls.h.
- Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h
to v4l2-controls.h.
- Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation.
- Add p_fwht_params to struct v4l2_ext_control.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined at the driver's code.
While not too late, let's rename them is preparation for promoting
the stateless FWHT codec API as a public API.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some functions has a different name between their prototypes
and the corresponding kernel-doc markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the call to vidtv_psi_pat_table_destroy frees the object
m->si.pat however m->si.pat->num_pmt is being accessed after the
free. Fix this by destroying m->si.pat after the m->si.pmt_secs[]
objects have been freed.
Addresses-Coverity: ("Read from pointer after free")
Reported-by: Cengiz Can <cengiz@kernel.wtf> # sent a similar fix about the same time
Fixes: 039b7caed1 ("media: vidtv: add a PID entry for the NIT table")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into patchwork
Linux 5.10-rc6
* tag 'v5.10-rc6': (1815 commits)
Linux 5.10-rc6
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
x86/mce: Do not overwrite no_way_out if mce_end() fails
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
printk: finalize records with trailing newlines
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
...
Avoid initializing the structs multiple times and pass the
PAT struct as a pointer, instead of a var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Pass struct header_write_args as a pointer, instead of
passing as a var;
- Initialize the psi_args struct only once.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function initializes the psi_args twice, and receives
a struct, instead of a pointer to a struct.
Clean it up.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cleanup the table_section_crc32_write_into() function
by initializing struct psi_write_args only once and by
passing the args as a pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function vidtv_psi_ts_psi_write_into() initializes the
ts_header fields several times, and receives a struct
as argument, instead of using a pointer to struct.
Cleanup the function, in order to reduce its stack usage
and to avoid initializing the ts_header multiple times.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current event is using an undefined date. Instead, it
should be the timestamp when the EIT table was generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The service_id there should be equal to the one used
on other tables, otherwise, EIT entries won't be valid.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the service currently broadcasts just audio, change the
service type to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On normal TS streams, the NIT table has its own entry at PAT,
but not at PMT.
While here, properly handle alloc problems when creating
PMT entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The EIT header ID field should not contain the network ID, but,
instead, the service_id of the program described at EIT.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As defined at ETSI TS 101 162, original network IDs up to 0xfebf
are reserved for registration at dvb.org.
Let's use, instead, an original network ID at the range
0xff00-0xffff, as this is for private temporary usage.
As the same value is also used for the network ID,
the range 0xff01-0xffff also fits better, as values
lower than that depend if the network is used for
satellite, terrestrial, cable of CI.
While here, move the TS ID to the bridge code, where it
is used, and change its value, as it was identical to
the value previously used by network ID. While we could
keep the same value, let's change it, just to make easier
to check for the new code while reading it with DVB tools
like dvbinspector.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Place some text at EIT data, and use ISO 8859-15 encoding for
the German letter "ü" (u mit umlat) letter.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Initialize the destination buffer/size and the initial
offset when creating the local var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of first zeroing all fields at the mux structs and
then filling, do some initialization for the const data
when they're created.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there's no need to access the length of some
tables. So, drop the unused functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do some cleanups at the coding style of the driver:
- remove "inline" declarations;
- use reverse xmas-tree for local var declarations;
- Adjust some indent to avoid breaking 80-cols;
- Cleanup some comments.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Minimize the number of data copies and initialization at
the code, passing them as pointers instead of duplicating
the data.
The only case where we're keeping the data copy is at
vidtv_pes_write_h(), as it needs a copy of the passed
arguments. On such case, we're being more explicit.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Initialize the fields of the arguments directly when
declaring it, and pass the args as a pointer, instead of
copying them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The sheet music used to generate the tones had a few
polyphonic notes. Due to that, its conversion to a
tones sequence had a few errors.
Also, due to a bug at the tone generator, it was missing
the pause at the initial compass.
Fix them.
While here, reduce the compass to 100bpm.
The music was converted from a Music XML file using
this small script:
<snip>
my $count = 0;
my $silent = 0;
my $note;
my $octave;
print "\t";
while (<>) {
$note = $1 if (m,\<step\>(.*)\</step\>,);
$octave = "_$1" if (m,\<octave\>(.*)\</octave\>,);
if (m,\<alter\>1\</alter\>,) {
$note .= "S";
$sharp = 1;
}
if (m,\<rest/\>,) {
$note = "SILENT";
$silent = 1;
}
if (m,\<duration\>(.*)\</duration\>,) {
printf "{ NOTE_${note}${octave}, %d},", $1 * 128 / 480;
$count++;
if ($silent || $count >= 3) {
print "\n\t";
$count = 0;
$silent = 0;
} else {
print " ";
print " " if (!$sharp);
}
$sharp = 0;
$note = "";
$octave = "";
};
};
print "\n";
</snip>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The tone generator logic were repeating the song after the
first silent. There's also a wrong logic at the note
offset calculus, which may create some noise.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While the original plan was to use the first movement of
the 5th Symphony, it was opted to use the Für Elise song,
instead.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Linux stack is too short. So, using recursive functions
is a very bad idea. Convert those into non-recursive ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, there are not checks if something gets bad during
memory allocation: it will simply use NULL pointers and
crash.
Add error path at the logic which allocates memory for the
MPEG-TS generator code, propagating the errors up to the
vidtv_bridge. Now, if something wents bad, start_streaming
will return an error that userspace can detect:
ERROR DMX_SET_PES_FILTER failed (PID = 0x2000): 12 Cannot allocate memory
and the driver doesn't crash.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Place the includes on alphabetical order;
- get rid of asm/byteorder.h;
- add bug.h at vidtv_s302m.c, as it is needed by
inux/fixp-arith.h
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some variables were only assigned once but were used in while
loops as if they had been updated at every iteration. Fix this.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A few fields used only by the tone generator in the s302m encoder
are stored in struct vidtv_encoder. Move them into
struct vidtv_s302m_ctx instead. While we are at it: fix a
checkpatch warning for long lines.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code to append a descriptor to the end of a chain is repeated
throughout the psi generator code. Extract it into its own helper
function to avoid cluttering.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement an Event Information Table (EIT) as per EN 300 468
5.2.4.
The EIT provides information in chronological order regarding
the events contained within each service.
For now only present event information is supported.
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a Network Information Table (NIT) as specified in ETSI EN 300 468.
This table conveys information relating to the physical organization of
the multiplexes carried via a given network and the characteristics of
the network itself.
It is conveyed in the output of vidtv as packets with TS PID of 0x0010
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The same constant (0xffffffff) is used in three different functions.
Extract it into a #define to avoid repetition.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Prevent NULL (or close to NULL) pointer dereference in various places by
registering the video device only when the V4L2 m2m framework has been set
up.
Fixes: commit 96d8eab5d0 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vivid driver is a bit flaky w.r.t. the kthread timing, esp. when
running inside a virtual machine.
This is caused by calling schedule_timeout_uninterruptible(1) which can
actually take more than one jiffie. A while loop with schedule() turns out
to be a lot more precise. Also, if mutex_trylock() fails, then just call
schedule() instead of schedule_timeout_uninterruptible(1). There is no need
to wait until the next jiffer, just schedule(), then try to get the lock
again.
This is still not precise enough, it is still relatively easy to get missed
frames. This really should be converted to use a proper timer, but for now
this solves the worst problems.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_format based ioctls can have an indirect pointer to an array
of v4l2_clip structures for overlay mode, depending on the 'type' member.
There are only five drivers that use the overlay mode and copy the
data through the __user pointer.
Change the five drivers to use memcpy() instead, and copy the data
in common code using the check_array_args() helpers. This allows
for a subsequent patch that use the same mechanism for compat
ioctl handlers.
Note that there is another pointer for a 'bitmap' that is only
used in the 'vivid' driver and nowhere else. There is no easy
way to use the same trick without adding complexity to the
common code, so this remains a __user pointer.
[hverkuil: fix: CHECK: spaces preferred around that '*' (ctx:VxV)]
[hverkuil: fix: CHECK: Alignment should match open parenthesis]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Neither Vlc nor Gstreamer likes the PES_scrambling_control bits.
In the case of GST, this can be seen with:
$ GST_DEBUG=2 LANG=C gst-play-1.0 pcm_audio.ts
...
0:00:00.097973439 12308 0x55f7ddd155e0 WARN pesparser pesparse.c:411:mpegts_parse_pes_header: Wrong '0x10' marker before PES_scrambling_control (0x40)
0:00:00.097987026 12308 0x55f7ddd155e0 WARN tsdemux tsdemux.c:2314:gst_ts_demux_parse_pes_header: Error parsing PES header. pid: 0x111 stream_type: 0x6
...
So, change, it. After such change, the stream now plays
fine with Vlc, Gstreamer, ffmpeg - and with programs
that use such libraries, like Kaffeine.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When compared with a stream generated via ffmpeg, it can be
noticed that the PES doesn't contain any PCR info. That could
cause problems with userspace decoding. So, rewrite the
logic that fills the adaptation info, in order to allow it
to add PCR frames without breaking frame alignment.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of passing struct pes_ts_header_write_args fields as
function parameters, just pass a pointer to the struct.
That would allow adding more args without needing to change
the function prototype.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to better test userspace applications, add an encoding
for the strings. The original channel string is also too big.
As we're just playing the first compasses of the 5th Beethoven
Symphony, change the service name to just "Beethoven". Also,
add a provider's name. For such purpose, let's point it to
the Linux media community website.
With such changes, the SDT table now looks more like one got
from a real digital TV channel:
SDT
| table_id 0x42
| section_length 44
| one 2
| zero 1
| syntax 1
| transport_stream_id 1860
| current_next 1
| version 0
| one2 3
| section_number 0
| last_section_number 0
| network_id 65281
| reserved 255
|\
|- service 0x0880
| EIT schedule 0
| EIT present following 0
| free CA mode 0
| running status 4
| descriptor length 27
| 0x48: service_descriptor
| service type 1
| provider 'LinuxTV.org'
| name 'Beethoven'
|_ 1 services
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's no reason to use static vars to store PSI version
numbers.
Also, currently, version numbers are starting with 0x01,
because there's a code being called that increases it to
1 for all table initializer code, as the code may support
dynamic changes at the PS tables on some future.
So, let's just initialize them to 0x1f, in order for the
versions to be reported as starting from 0.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This field should point to the network ID, and has different
ranges for cable, terrestrial or satellite. It also has
an special range for temporary private usage.
For now, let's use the temporary private one. Once the
Network Information Table (NIT) gets added, this should be
reviewed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Changeset 870e350d4e ("media: vidtv: get rid of ENDIAN_BITFIELD nonsense")
was incomplete. There are still some wrong endannes logic at
the driver. Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's no need to have a check when setting timing.past_jiffies,
as we can simply do the initialization earlier at vidtv_mux_init().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSC API (Colorspace conversion) allows userspace to try
to configure the colorspace, transfer function, Y'CbCr/HSV encoding
and the quantization for capture devices. This patch adds support
to the CSC API in vivid.
Using the CSC API, userspace is allowed to do the following:
- Set the colorspace.
- Set the xfer_func.
- Set the ycbcr_enc function for YUV formats.
- Set the hsv_enc function for HSV formats
- Set the quantization for YUV and RGB formats.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As warned by smatch:
drivers/media/test-drivers/vidtv/vidtv_psi.c:93 vidtv_psi_update_version_num() warn: impossible condition '(h->version > 32) => (0-31 > 32)'
h_version is declared as:
u8 version:5;
Meaning that its value ranges from 0 to 31. Incrementing 31 on such
data will overflow to zero, as expected.
So, just drop the uneeded overflow check.
While here, use "foo++" instead of "++foo", as this is a much
more common pattern.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's no need to use u64 over there. In a matter of fact,
the div is not even needed, as it is multiplying by 1000 and
dividing by 1000.
So, simplify the logic.
While here, constrain the buffer size to a certain range
(between the current value and 10 times it)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following error for builds on 32bit architectures:
ERROR: modpost: "__udivdi3"
[drivers/media/test-drivers/vidtv/dvb-vidtv-bridge.ko] undefined!
Which is due to 64bit divisions that did not go through the helpers
in linux/math64.h
As vidtv_mux_check_mux_rate was not operational in its current form,
drop the entire function while it is not fixed properly.
For now, call vidtv_mux_pad_with_nulls with a constant number of packets
to avoid warnings due to unused functions when building this driver.
The 64bit division used in the s302m is not needed, remove them and use
a fixed number of frames and a constant PTS increment instead.
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Keep playing a single tone is not too nice, and prevents
checking some weird things.
So, instead, implement a simple tone generator, changing
the code to play a public domain song (5th Symphony of
Beethoven), using sinusoidal waves.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A typical digital TV stream has errors that are corrected
by Viterbi. While the error rate after Viterbi is usually
zero, with good signals, there are some chances of getting
random errors before that, which are auto-corrected by
the error code algorithm.
Add a poor guy's implementation that would show some
noise at the pre-BER part of the demod.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Satellite setups are different than terrestrial and cable ones,
as there is a device coupled at the antenna, called LNBf, which
converts the frequency from a GHz range at C-Band or Ku-Band
into an intermediate frequency at S-Band (ranging up to ~2GHz).
There are several different models of LNBf, with different
IF conversions, but the most common nowadays is called
Universal LNBf. Those got their frequency ranges extended in the
past, when Astra 19.2E sattellite was launched.
The universal LNBf has two local oscilators:
- 9.75 GHz
- 10.6 GHz
The first one is used when the frequency is between 10.7 GHz
up to 11.7 GHz. The second one is for frequencies between
11.7 GHz to 12.75 GHz.
With that, the IF signal will be at 950 MHz to 2,150 MHz range.
Add support for doing the above math, and make clear that
the frequencies expected by the driver should be at Ku-Band
range.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As reported by gcc:
drivers/media/test-drivers/vidtv/vidtv_demod.c: In function 'vidtv_demod_set_frontend':
drivers/media/test-drivers/vidtv/vidtv_demod.c:265:42: warning: variable 'cnr2qual' set but not used [-Wunused-but-set-variable]
265 | const struct vidtv_demod_cnr_to_qual_s *cnr2qual = NULL;
| ^~~~~~~~
It turns that the var is not needed at all. So, just drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On real devices, signal strength is always a negative
number when represented in dBm. A more interesting
range is to use dBmV (which is what Kaffeine does,
for example). The conversion from the two units are
simple:
dBmV = dBm - 108
Usually, signal strength ranges up to 100dBmV. Adjust the
maximum value to be around 74 dBmV, when there's no
frequency shift, which represents a good signal.
With that, Kaffeine displays it a lot better.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for incrementing DVBv5 stats for block counters
and post/pre BER byte counts.
For now, the errors won't be incremented yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The dvb_frontend will already call status periodically, when
a channel is tuned. So, no need to have a work queue for
such purpose.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current stats code is broken on so many ways. It ends
reporting 0 for signal strengh, and the work queue doesn't
run. If it would run, the code would crash.
Fix such issues and add the minimum stuff for DVBv5 stats.
Right now, only strength and cnr and UCB are implemented.
pre/post BER stats will always return zero.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, the config data passed from the bridge driver is
just ignored.
Also, let's initialize the delayed work at probing time.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code there is already doing the right thing, as it uses
value & 0xff, value & 0xff00, which already ensures the
expected endiannes.
So, it doesn't make any sense to touch the order depending on
the CPU endiannes.
Yet, as pointed by Daniel at the mailing list:
https://lore.kernel.org/linux-media/e614351c-215c-c048-52af-7c200b164f41@xs4all.nl/T/#m8d221684a151833966359c2ed8bdce0f0ee4e5fd
The reverse code is needed by the decoder. So, keep it
no matter the endiannes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use 474 MHz frequency for DVB-T/DVB-C, as this is the at the
channel range that it is valid on most places for DVB-T.
In the case of DVB-S, let's add Astra 19.2E initial
frequency at the scan files as the default, e. g. 12.5515 GHz.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there are some issues at the tuning logic:
1) the config struct is not copied at the tuner driver.
so, it won't use any frequency table at all;
2) the code that checks for frequency shifts is called
at set_params. So, lock_status will never be zeroed;
3) the signal strength will also report a strong
signal, even if not tuned;
4) the logic is not excluding non-set frequencies.
Fix those issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The two places where ENDIAN_BITFIELD is used is for a single
8-bits integer. No need to correct endiannes on such cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Genmask is always highest order to low order. It doesn't make
any sense to make it depends on endiannes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several warnings produced when the driver is built
for 32-bit archs. Solve them.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is better to use the higher level dev_foo() than pr_foo()
for printks.
Change them at vidtv at the more trivial places.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
menuconfig DVB_TEST_DRIVERS should be added after the V4L_TEST_DRIVERS,
otherwise there are no drivers listed in these two menus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 24fb190e92 ("media: vidtv: implement a tuner driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Digital TV devices consist of several independent hardware components
which are controlled by different drivers.
Each media device is controlled by a group of cooperating drivers with the
bridge driver as the main driver.
This patch adds a bridge driver for the Virtual Digital TV driver [vidtv].
The bridge driver binds to the other drivers, that is, vidtv_tuner and
vidtv_demod and implements the digital demux logic, providing userspace
with a MPEG Transport Stream.
The MPEG related code is split in the following way:
- vidtv_ts: code to work with MPEG TS packets, such as TS headers,
adaptation fields, PCR packets and NULL packets.
- vidtv_psi: this is the PSI generator.
PSI packets contain general information about a MPEG Transport Stream.
A PSI generator is needed so userspace apps can retrieve information
about the Transport Stream and eventually tune into a (dummy) channel.
Because the generator is implemented in a separate file, it can be
reused elsewhere in the media subsystem.
Currently vidtv supports working with 3 PSI tables:
PAT, PMT and SDT.
- vidtv_pes: implements the PES logic to convert encoder data into
MPEG TS packets. These can then be fed into a TS multiplexer and
eventually into userspace.
- vidtv_s302m: implements a S302M encoder to make it possible to
insert PCM audio data in the generated MPEG Transport Stream.
This shall enable passing an audio signal into userspace so it can be
decoded and played by media software.
- vidtv_channels: Implements a 'channel' abstraction
When vidtv boots, it will create some hardcoded channels:
Their services will be concatenated to populate the SDT.
Their programs will be concatenated to populate the PAT
For each program in the PAT, a PMT section will be created
The PMT section for a channel will be assigned its streams.
Every stream will have its corresponding encoder polled to produce TS
packets
These packets may be interleaved by the mux and then delivered to the
bridge
- vidtv_mux - Implements a MPEG TS mux, loosely based on the ffmpeg
implementation
The multiplexer is responsible for polling encoders,
interleaving packets, padding the resulting stream with NULL packets if
necessary and then delivering the resulting TS packets to the bridge
driver so it can feed the demux.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement a I2C demodulator driver, simulating support for DVB-T, DVB-C
and DVB-S.
This demodulator will periodically check the signal quality against a table
and drop the TS lock if it drops below a threshold value, regaining it in
the event that the signal improves.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The virtual DVB test driver serves as a reference DVB driver and helps
validate the existing APIs in the media subsystem. It can also aid
developers working on userspace applications.
This dummy tuner should support common TV standards such as DVB-T/T2/S/S2,
ISDB-T and ATSC when completed.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this warning:
vivid-core.c: In function 'vivid_create_devnodes':
vivid-core.c:1318:11: warning: unused variable 'i' [-Wunused-variable]
1318 | int ret, i;
| ^
and this error:
vivid-core.c: In function 'vivid_create_instance':
vivid-core.c:1885:47: error: 'cec_tx_bus_cnt' undeclared (first use in this function)
1885 | ret = vivid_create_devnodes(pdev, dev, inst, cec_tx_bus_cnt,
| ^~~~~~~~~~~~~~
vivid-core.c:1885:47: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into patchwork
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
If something fails after calling v4l2_device_register(),
it should call v4l2_device_put().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to reduce even further the size of the big
vivid_create_instance() function, let's place the part of the
logic which creates the device nodes into a separate function.
With this and the past patches, those warnings finally
vanishes:
drivers/media/test-drivers/vivid/vivid-core.c: drivers/media/test-drivers/vivid/vivid-core.c:1189 vivid_create_instance() parse error: turning off implications after 60 seconds
drivers/media/test-drivers/vivid/vivid-core.c: drivers/media/test-drivers/vivid/vivid-core.c:1257 vivid_create_instance() parse error: __split_smt: function too hairy. Giving up after 303 seconds
The init code also seems more organized after breaking the long
function into a smaller set.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of placing everything inside vivid_create_instance(),
we can move the part which creates per-type video queues
into a separate function.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move such logic from vivid_create_instance(), as otherwise
smatch takes forever.
The vivid_create_instance() is still a too big for my taste.
So, further cleanups are still needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vivid_create_instance() function is too harry. Smatch can't
process it, because it takes too long.
The detection part is an important piece of it. As such, there
are even comments before and after such block.
So, it makes sense to just move it to a separate function.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following coccinelle reports:
drivers/media/test-drivers/vicodec/vicodec-core.c:1674:2-21:
WARNING: Assignment of 0/1 to bool variable
drivers/media/test-drivers/vicodec/vicodec-core.c:1675:2-26:
WARNING: Assignment of 0/1 to bool variable
By replacing the assignment to 0 with 'false' instead.
Found using - Coccinelle (http://coccinelle.lip6.fr)
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use vb2_video_unregister_device() to automatically stop streaming
at unregister time.
This avoids the use of vb2_queue_release() which should not be
called by drivers that set vdev->queue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put(), so the control request object was never
released.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 997deb811b ("media: vicodec: Add support for stateless decoder.")
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tian Tao