Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
ccree had a mechanism for IV generation which was not compatible
with the Linux seqiv or echainiv iv generator and was never used
in any of the upstream versions so drop all the code implementing it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ccree irq may be shared with other devices, in order to prevent ccree isr
handling while device maybe suspended we added a check to verify that the
device is not suspended.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of driver probe and pm resume we need to check that the cryptocell
hardware reset cycle is completed. during the reset cycle that Cryptocell
provide read only access to the APB interface which allows to verify
through the CC registers that the reset is completed. Until reset
completion we assume that any write/crypto operation is blocked.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
in order to support cryptocell tee fips error that may occurs while
cryptocell ree is suspended, an cc_tee_handle_fips_error call added
to the cc_pm_resume function.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During power management suspend the driver need to prepare the device
for the power down operation and as a last indication write to the
HOST_POWER_DOWN_EN register which signals to the hardware that
The ccree is ready for power down.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On power management resume function first enable the device clk source
to allow access to the device registers.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This sacrificial copyright header update is offered to the legal department
as atonement for any changes made in this driver files in the course of
the current year which have not been duly recorded as such.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were enabling autosuspend, which is using data set by the
hash module, prior to the hash module being inited, casuing
a crash on resume as part of the startup sequence if the race
was lost.
This was never a real problem because the PM infra was using low
res timers so we were always winning the race, until commit 8234f6734c
("PM-runtime: Switch autosuspend over to using hrtimers") changed that :-)
Fix this by seperating the PM setup and enablement and doing the
latter only at the end of the init sequence.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@kernel.org # v4.20
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce basic low level Arm TrustZone CryptoCell HW support.
This first patch doesn't actually register any Crypto API
transformations, these will follow up in the next patch.
This first revision supports the CC 712 REE component.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jianping Liu