Commit Graph

2207 Commits

Author SHA1 Message Date
Linus Torvalds 25cfb0c7de Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
 "Only a single change, to enable coldfire preemption entry code for all
  preemption types"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k/coldfire: Use CONFIG_PREEMPTION
2019-12-05 12:20:42 -08:00
Mike Rapoport 60e50f34b1 m68k: mm: use pgtable-nopXd instead of 4level-fixup
m68k has two or three levels of page tables and can use appropriate
pgtable-nopXd and folding of the upper layers.

Replace usage of include/asm-generic/4level-fixup.h and explicit
definitions of __PAGETABLE_PxD_FOLDED in m68k with
include/asm-generic/pgtable-nopmd.h for two-level configurations and
with include/asm-generic/pgtable-nopud.h for three-lelve configurations
and adjust page table manipulation macros and functions accordingly.

[akpm@linux-foundation.org: fix merge glitch]
[geert@linux-m68k.org: more merge glitch fixes]
[akpm@linux-foundation.org: s/bad_pgd/bad_pud/, per Mike]
Link: http://lkml.kernel.org/r/1572938135-31886-6-git-send-email-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:15 -08:00
Mike Rapoport f6f7caeb58 m68k: nommu: use pgtable-nopud instead of 4level-fixup
The generic nommu implementation of page table manipulation takes care
of folding of the upper levels and does not require fixups.

Simply replace of include/asm-generic/4level-fixup.h with
include/asm-generic/pgtable-nopud.h.

Link: http://lkml.kernel.org/r/1572938135-31886-5-git-send-email-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:15 -08:00
Linus Torvalds ad0b314e00 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sysctl system call removal from Eric Biederman:
 "As far as I can tell we have reached the point where no one enables
  the sysctl system call anymore. It still is enabled in a few
  defconfigs but they are mostly the rarely used one and in asking
  people about that it was more cut & paste enabled than anything else.

  This is single commit that just deletes code. Leaving just enough code
  so that the deprecated sysctl warning continues to be printed. If my
  analysis turns out to be wrong and someone actually cares it will be
  easy to revert this commit and have the system call again.

  There was one new xtensa defconfig in linux-next that enabled the
  system call this cycle and when asked about it the maintainer of the
  code replied that it was not enabled on purpose. As of today's
  linux-next tree that defconfig no longer enables the system call.

  What we saw in the review discussion was that if we go a step farther
  than my patch and mess with uapi headers there are pieces of code that
  won't compile, but nothing minds the system call actually disappearing
  from the kernel"

Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sysctl: Remove the sysctl system call
2019-12-01 13:26:18 -08:00
Linus Torvalds 81b6b96475 dma-mapping updates for 5.5-rc1
- improve dma-debug scalability (Eric Dumazet)
  - tiny dma-debug cleanup (Dan Carpenter)
  - check for vmap memory in dma_map_single (Kees Cook)
  - check for dma_addr_t overflows in dma-direct when using
    DMA offsets (Nicolas Saenz Julienne)
  - switch the x86 sta2x11 SOC to use more generic DMA code
    (Nicolas Saenz Julienne)
  - fix arm-nommu dma-ranges handling (Vladimir Murzin)
  - use __initdata in CMA (Shyam Saini)
  - replace the bus dma mask with a limit (Nicolas Saenz Julienne)
  - merge the remapping helpers into the main dma-direct flow (me)
  - switch xtensa to the generic dma remap handling (me)
  - various cleanups around dma_capable (me)
  - remove unused dev arguments to various dma-noncoherent helpers (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3f+eULHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPyPg/+PVHCrhmepudQQFHu6wfurE5U77iNnoUifvG+b5z5
 5mHmTMkQwyox6rKDe8NuFApAhz1VJDSUgSelPmvTSOIEIGXCvX1p+GqRSVS5YQON
 aLzGvbWKE8hCpaPdDHKYDauD1FZGMM8L2P5oOMF9X9fQ94xxRqfqJM6c8iD16Sgg
 +aOgPNzTnxQHJFF/Dbt/mjJrKXWI+XF+bgUbH+l9yKa7Dd7ibmJR8yl9hs1jmp0H
 1CZ+CizwnAs57rCd1a6Ybc6gj59tySc03NMnnbTko+KDxrcbD3Ee2tpqHVkkCjYz
 Yl0m4FIpbotrpokL/FIS727bVvkjbWgoeM+kiVPoYzmZea3pq/tFDr6tp/BxDhFj
 TZXSFfgQljlYMD3ppSoklFlfjGriVWV0tPO3arPXwuuMF5EX/IMQmvxei05jpc8n
 iELNXOP9iZZkY4tLHy2hn2uWrxBRrS1WQwlLg9hahlNRzyfFSyHeP0zWlVDt+RgF
 5CCbEI+HQcUqg1FApB30lQNWTn1+dJftrpKVBlgNBIyIa/z2rFbt8GdSnItxjfQX
 /XX8EZbFvF6AcXkgURkYFIoKM/EbYShOSLcYA3PTUtcuTnF6Kk5eimySiGWZTVCS
 prruSFDZJOvL3SnOIMIiYVmBdB7lEbDyLI/VYuhoECXEDCJpVmRktNkJNg4q6/E+
 fjQ=
 =e5wO
 -----END PGP SIGNATURE-----

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - improve dma-debug scalability (Eric Dumazet)

 - tiny dma-debug cleanup (Dan Carpenter)

 - check for vmap memory in dma_map_single (Kees Cook)

 - check for dma_addr_t overflows in dma-direct when using DMA offsets
   (Nicolas Saenz Julienne)

 - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
   Saenz Julienne)

 - fix arm-nommu dma-ranges handling (Vladimir Murzin)

 - use __initdata in CMA (Shyam Saini)

 - replace the bus dma mask with a limit (Nicolas Saenz Julienne)

 - merge the remapping helpers into the main dma-direct flow (me)

 - switch xtensa to the generic dma remap handling (me)

 - various cleanups around dma_capable (me)

 - remove unused dev arguments to various dma-noncoherent helpers (me)

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:

* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
  dma-mapping: treat dev->bus_dma_mask as a DMA limit
  dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
  dma-direct: don't check swiotlb=force in dma_direct_map_resource
  dma-debug: clean up put_hash_bucket()
  powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
  dma-direct: avoid a forward declaration for phys_to_dma
  dma-direct: unify the dma_capable definitions
  dma-mapping: drop the dev argument to arch_sync_dma_for_*
  x86/PCI: sta2x11: use default DMA address translation
  dma-direct: check for overflows on 32 bit DMA addresses
  dma-debug: increase HASH_SIZE
  dma-debug: reorder struct dma_debug_entry fields
  xtensa: use the generic uncached segment support
  dma-mapping: merge the generic remapping helpers into dma-direct
  dma-direct: provide mmap and get_sgtable method overrides
  dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
  dma-direct: remove __dma_direct_free_pages
  usb: core: Remove redundant vmap checks
  kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
  dma-debug: add a schedule point in debug_dma_dump_mappings()
  ...
2019-11-28 11:16:43 -08:00
Linus Torvalds a308a71022 generic ioremap support
- clean up various obsolete ioremap and iounmap variants
  - add a new generic ioremap implementation and switch csky, nds32 and
    riscv over to it
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3cKcsLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYO1CRAAwFQigsbi0CqqshPWnP0owKV+HA4Xfz/lQZsd7SM/
 BVXhKyDJQum6gp73dW025HCfjidTknsbdCUIP/LNUgAnop3lOlnB31/munDnJJ1H
 6hB1pc+zB9VgbOe0A6TxtxPRm5aE33k1hZIZS99lOh7mY3FvF7mbkkbVoCjdS3Cq
 a9bTX+X+esfUQ5GgaIc2zmz2GLkyFXIeVGs8/CoOX58ESCWQcVZrsQRompo4SgrI
 jqwf47NzdmK8hW4mZ+jdQUiWiAmNs5+2om7Bvi/deFAIFUo1/hLHvQzqEGramq/j
 5SPHax2gWAN3uWYP91QISkUAJWFydwgmUDoTO1M04ov4xLuBrqIQmc43tLjHo2UT
 RwMozWJWN+gkB9zTIboqMPi2qcuDaWcCij7LwHl5zLxPTcOKsrALarL55BQ8MipQ
 x6fpvskrQQvlArNTsRWFRUq0mCtkzE3wMZ9RR3AIETQL2hlAzB1S4gzhD+Z6WTYY
 pXNgkunonVGxwyN/7iJTEl/mvF/+MynGcWqhrwHZLqncyhn/WJJ2USH3nAD1+yjp
 v8v6UUeMXIjUsGAyfTjXy/WXAfwRuSC038AAFcmWKDdh08h4XvPHRficT4U8wr34
 7WzGizHP9f1CqrhYL/4exhPY9X2Yb7HhsFd0bZGG0rRvSillPUp0b8s++m12QuQU
 +VY=
 =ooiA
 -----END PGP SIGNATURE-----

Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap

Pull generic ioremap support from Christoph Hellwig:
 "This adds the remaining bits for an entirely generic ioremap and
  iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
  mess of weird ioremap variants we had with no users outside the arch
  code.

  For now just the three newest ports use the code, but there is more
  than a handful others that can be converted without too much work.

  Summary:

   - clean up various obsolete ioremap and iounmap variants

   - add a new generic ioremap implementation and switch csky, nds32 and
     riscv over to it"

* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
  nds32: use generic ioremap
  csky: use generic ioremap
  csky: remove ioremap_cache
  riscv: use the generic ioremap code
  lib: provide a simple generic ioremap implementation
  sh: remove __iounmap
  nios2: remove __iounmap
  hexagon: remove __iounmap
  m68k: rename __iounmap and mark it static
  arch: rely on asm-generic/io.h for default ioremap_* definitions
  asm-generic: don't provide ioremap for CONFIG_MMU
  asm-generic: ioremap_uc should behave the same with and without MMU
  xtensa: clean up ioremap
  x86: Clean up ioremap()
  parisc: remove __ioremap
  nios2: remove __ioremap
  alpha: remove the unused __ioremap wrapper
  hexagon: clean up ioremap
  ia64: rename ioremap_nocache to ioremap_uc
  unicore32: remove ioremap_cached
  ...
2019-11-28 10:57:12 -08:00
Eric W. Biederman 61a47c1ad3 sysctl: Remove the sysctl system call
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL.  The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL.  However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.

As there appear to be no users of the sysctl system call, remove the
code.  As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.

Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-11-26 13:03:56 -06:00
Linus Torvalds 1d87200446 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Cross-arch changes to move the linker sections for NOTES and
     EXCEPTION_TABLE into the RO_DATA area, where they belong on most
     architectures. (Kees Cook)

   - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
     trap jumps into the middle of those padding areas instead of
     sliding execution. (Kees Cook)

   - A thorough cleanup of symbol definitions within x86 assembler code.
     The rather randomly named macros got streamlined around a
     (hopefully) straightforward naming scheme:

        SYM_START(name, linkage, align...)
        SYM_END(name, sym_type)

        SYM_FUNC_START(name)
        SYM_FUNC_END(name)

        SYM_CODE_START(name)
        SYM_CODE_END(name)

        SYM_DATA_START(name)
        SYM_DATA_END(name)

     etc - with about three times of these basic primitives with some
     label, local symbol or attribute variant, expressed via postfixes.

     No change in functionality intended. (Jiri Slaby)

   - Misc other changes, cleanups and smaller fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  x86/entry/64: Remove pointless jump in paranoid_exit
  x86/entry/32: Remove unused resume_userspace label
  x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
  m68k: Convert missed RODATA to RO_DATA
  x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
  x86/mm: Report actual image regions in /proc/iomem
  x86/mm: Report which part of kernel image is freed
  x86/mm: Remove redundant address-of operators on addresses
  xtensa: Move EXCEPTION_TABLE to RO_DATA segment
  powerpc: Move EXCEPTION_TABLE to RO_DATA segment
  parisc: Move EXCEPTION_TABLE to RO_DATA segment
  microblaze: Move EXCEPTION_TABLE to RO_DATA segment
  ia64: Move EXCEPTION_TABLE to RO_DATA segment
  h8300: Move EXCEPTION_TABLE to RO_DATA segment
  c6x: Move EXCEPTION_TABLE to RO_DATA segment
  arm64: Move EXCEPTION_TABLE to RO_DATA segment
  alpha: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Actually use _etext for the end of the text segment
  vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
  ...
2019-11-26 10:42:40 -08:00
Christoph Hellwig 56e35f9c5b dma-mapping: drop the dev argument to arch_sync_dma_for_*
These are pure cache maintainance routines, so drop the unused
struct device argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-20 20:31:38 +01:00
Michael Schmitz 5ed0794cde m68k/atari: Convert Falcon IDE drivers to platform drivers
Autoloading of Falcon IDE driver modules requires converting these
drivers to platform drivers.

Add platform device for Falcon IDE interface in Atari platform setup
code. Use this in the pata_falcon driver in place of the simple
platform device set up on the fly.

Convert falconide driver to use the same platform device that is used
by pata_falcon also. (With the introduction of a platform device for
the Atari Falcon IDE interface, the old Falcon IDE driver no longer
loads (resource already claimed by the platform device)).

Tested (as built-in driver) on my Atari Falcon.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://lore.kernel.org/r/1573008449-8226-1-git-send-email-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-11-18 10:18:59 +01:00
Kees Cook de7156689d m68k: Convert missed RODATA to RO_DATA
I missed two instances of the old RODATA macro (seems I was searching
for vmlinux.lds* not vmlinux*lds*). Fix both instances and double-check
the entire tree for other "RODATA" instances in linker scripts.

Fixes: c82318254d ("vmlinux.lds.h: Replace RODATA with RO_DATA")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-m68k@lists.linux-m68k.org
Cc: Sam Creasey <sammy@sammy.net>
Link: https://lkml.kernel.org/r/201911110920.5840E9AF1@keescook
2019-11-12 09:56:51 +01:00
Christoph Hellwig 076863473c m68k: rename __iounmap and mark it static
m68k uses __iounmap as the name for an internal helper that is only
used for some CPU types.  Mark it static, give it a better name
and move it around a bit to avoid a forward declaration.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-11-11 21:18:19 +01:00
Thomas Gleixner 3ad3cbe305 m68k/coldfire: Use CONFIG_PREEMPTION
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.

Switch the entry code over to use CONFIG_PREEMPTION.

Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-11-11 10:54:40 +10:00
Kees Cook c9174047b4 vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATA
Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie,
since it's multiple sections and section flags cannot be applied to
the macro.)

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20191029211351.13243-14-keescook@chromium.org
2019-11-04 15:57:41 +01:00
Kees Cook 93240b3279 vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATA
Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section"
is a lie, since it's multiple sections and section flags cannot be
applied to the macro.)

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20191029211351.13243-13-keescook@chromium.org
2019-11-04 15:56:16 +01:00
Geert Uytterhoeven 032f128dbd m68k: defconfig: Enable ICY I2C and LTC2990 on Amiga
Enable support for the ICY I2C board for Amiga, which is typically
equipped with an LTC2990 hwmon chip, in the Amiga and multi-platform
defconfig files.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20191021070438.10819-1-geert@linux-m68k.org
Acked-by: Max Staudt <max@enpas.org>
2019-11-04 10:48:32 +01:00
Geert Uytterhoeven 84ba838990 m68k: defconfig: Update defconfigs for v5.4-rc1
Actual changes:
    -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
    -CONFIG_CRYPTO_AEGIS128L=m
    -CONFIG_CRYPTO_AEGIS256=m
    -CONFIG_CRYPTO_MORUS1280=m
    -CONFIG_CRYPTO_MORUS640=m
    +CONFIG_DM_CLONE=m
    +CONFIG_EROFS_FS=m
    -# CONFIG_LCD_CLASS_DEVICE is not set

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20191001073539.4488-1-geert@linux-m68k.org
2019-11-04 10:48:32 +01:00
Fuqian Huang 7cf78b6b12 m68k: q40: Fix info-leak in rtc_ioctl
When the option is RTC_PLL_GET, pll will be copied to userland
via copy_to_user. pll is initialized using mach_get_rtc_pll indirect
call and mach_get_rtc_pll is only assigned with function
q40_get_rtc_pll in arch/m68k/q40/config.c.
In function q40_get_rtc_pll, the field pll_ctrl is not initialized.
This will leak uninitialized stack content to userland.
Fix this by zeroing the uninitialized field.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-10-21 09:08:15 +02:00
Mark Rutland b4ed71f557 mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26 10:10:44 -07:00
Mike Rapoport 782de70c42 mm: consolidate pgtable_cache_init() and pgd_cache_init()
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.

Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init().  Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.

Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().

Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org>		[arm64]
Acked-by: Thomas Gleixner <tglx@linutronix.de>	[x86]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Nicholas Piggin 13224794cb mm: remove quicklist page table caches
Patch series "mm: remove quicklist page table caches".

A while ago Nicholas proposed to remove quicklist page table caches [1].

I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.

[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com

This patch (of 3):

Remove page table allocator "quicklists".  These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.

The numbers in the initial commit look interesting but probably don't
apply anymore.  If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.

Also it might be better to instead make more general improvements to page
allocator if this is still so slow.

Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Linus Torvalds e070355664 Modules updates for v5.4
Summary of modules changes for the 5.4 merge window:
 
 - Introduce exported symbol namespaces.
 
   This new feature allows subsystem maintainers to partition and
   categorize their exported symbols into explicit namespaces. Module
   authors are now required to import the namespaces they need.
 
   Some of the main motivations of this feature include: allowing kernel
   developers to better manage the export surface, allow subsystem
   maintainers to explicitly state that usage of some exported symbols
   should only be limited to certain users (think: inter-module or
   inter-driver symbols, debugging symbols, etc), as well as more easily
   limiting the availability of namespaced symbols to other parts of the
   kernel. With the module import requirement, it is also easier to spot
   the misuse of exported symbols during patch review. Two new macros are
   introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
   thoroughly documented in Documentation/kbuild/namespaces.rst.
 
 - Some small code and kbuild cleanups here and there.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJdh3n8AAoJEMBFfjjOO8Fy94kP+QHZF39QDvLbxAzEYAETAS+o
 CFu6wix/DrAwFkTU/kX1eAsAwDBEz0xkMciR4BsLX3sIafUVERxtDXVAui/dA1+6
 zfw2c3ObyVwPEk6aUPFprgkj+08gxujsJFlYTsQQUhtRbmxg6R7hD6t6ANxiHaY2
 AQe5TzOWXoIa2hHO+7rPMqf8l6qiFCaL0s3v5jrmBXa5mHmc4PVy95h1J6xQVw2u
 b+SlvKeylHv+OtCtvthkAJS3hfS35J/1TNb/RNYIvh60IfEguEuFsGuQ9JiSSAZS
 pv1cJ+I5d4v8Y/md1rZpdjTJL9gCrq/UUC67+UkejCOn0C+7XM2eR4Bu/jWvdMSn
 ZQDHcPhFSIfmP7FaKomPogaBbw1sI1FvM5930pPJzHnyO9+cefBXe7rWaaB+y0At
 GAxOtmk1dKh01BT7YO/C0oVuX87csWd74NHypVsbs0TgQo5jBFdZRheyDrq5YB+s
 tVK+5H0nqQrCcfo/TvhcsZlgITTGtgTPenaW99/i7qNa9mRUtxC/VkE+aob6HNRF
 1iBxxopOTxGN8akyKOVumtkuTQH3EJfouZee//pWbXLzyDmScg/k67vuao8kxbyq
 NA1piFAGJAHFsHATxrbvNOq6jZ5bfUT8pwSTs83JppuR++8Hxk7zaShS3/LvsvHt
 6ist/epOwTZ7oiNQ04nj
 =72Uy
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull modules updates from Jessica Yu:
 "The main bulk of this pull request introduces a new exported symbol
  namespaces feature. The number of exported symbols is increasingly
  growing with each release (we're at about 31k exports as of 5.3-rc7)
  and we currently have no way of visualizing how these symbols are
  "clustered" or making sense of this huge export surface.

  Namespacing exported symbols allows kernel developers to more
  explicitly partition and categorize exported symbols, as well as more
  easily limiting the availability of namespaced symbols to other parts
  of the kernel. For starters, we have introduced the USB_STORAGE
  namespace to demonstrate the API's usage. I have briefly summarized
  the feature and its main motivations in the tag below.

  Summary:

   - Introduce exported symbol namespaces.

     This new feature allows subsystem maintainers to partition and
     categorize their exported symbols into explicit namespaces. Module
     authors are now required to import the namespaces they need.

     Some of the main motivations of this feature include: allowing
     kernel developers to better manage the export surface, allow
     subsystem maintainers to explicitly state that usage of some
     exported symbols should only be limited to certain users (think:
     inter-module or inter-driver symbols, debugging symbols, etc), as
     well as more easily limiting the availability of namespaced symbols
     to other parts of the kernel.

     With the module import requirement, it is also easier to spot the
     misuse of exported symbols during patch review.

     Two new macros are introduced: EXPORT_SYMBOL_NS() and
     EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
     Documentation/kbuild/namespaces.rst.

   - Some small code and kbuild cleanups here and there"

* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Remove leftover '#undef' from export header
  module: remove unneeded casts in cmp_name()
  module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
  module: remove redundant 'depends on MODULES'
  module: Fix link failure due to invalid relocation on namespace offset
  usb-storage: export symbols in USB_STORAGE namespace
  usb-storage: remove single-use define for debugging
  docs: Add documentation for Symbol Namespaces
  scripts: Coccinelle script for namespace dependencies.
  modpost: add support for generating namespace dependencies
  export: allow definition default namespaces in Makefiles or sources
  module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
  modpost: add support for symbol namespaces
  module: add support for symbol namespaces.
  export: explicitly align struct kernel_symbol
  module: support reading multiple values per modinfo tag
2019-09-22 10:34:46 -07:00
Linus Torvalds d7b0827f28 Kbuild updates for v5.4
- add modpost warn exported symbols marked as 'static' because 'static'
    and EXPORT_SYMBOL is an odd combination
 
  - break the build early if gold linker is used
 
  - optimize the Bison rule to produce .c and .h files by a single
    pattern rule
 
  - handle PREEMPT_RT in the module vermagic and UTS_VERSION
 
  - warn CONFIG options leaked to the user-space except existing ones
 
  - make single targets work properly
 
  - rebuild modules when module linker scripts are updated
 
  - split the module final link stage into scripts/Makefile.modfinal
 
  - fix the missed error code in merge_config.sh
 
  - improve the error message displayed on the attempt of the O= build
    in unclean source tree
 
  - remove 'clean-dirs' syntax
 
  - disable -Wimplicit-fallthrough warning for Clang
 
  - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
 
  - remove ARCH_{CPP,A,C}FLAGS variables
 
  - add $(BASH) to run bash scripts
 
  - change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
    instead of the basename
 
  - stop suppressing Clang's -Wunused-function warnings when W=1
 
  - fix linux/export.h to avoid genksyms calculating CRC of trimmed
    exported symbols
 
  - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl1+OnoeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGoKEQAKcid9lDacMe5KWT
 4Ic93hANMFKZ9Qy8WoxivnOr1a93NcloZ0Bhka96QUt7hYUkLmDCs99eMbxKuMfP
 m/ViHepojOBPzq+VtAGWOiIyPMCA7XDrTPph4wcPDKeOURTreK1PZ20fxDoAR4to
 +qaqKZJGdRcNf2DpJN1yIosz8Wj0Sa2LQrRi9jgUHi3bzgvLfL7P9WM2xyZMggAc
 GaSktCEFL0UzMFlMpYyDrKh2EV6ryOnN8+bVAKbmWP89tuU3njutycKdWOoL+bsj
 tH2kjFThxQyIcZGNHS1VzNunYAFE2q5nj2q47O1EDN6sjTYUoRn5cHwPam6x3Kly
 NH88xDEtJ7sUUc9GZEIXADWWD0f08QIhAH5x+jxFg3529lNgyrNHRSQ2XceYNAnG
 i/GnMJ0EhODOFKusXw7sNlWFKtukep+8/pwnvfTXWQu6plEm5EQ3a3RL5SESubVo
 mHzXsQDFCE0x/UrsJxEAww+3YO3pQEelfVi74W9z0cckpbRF8FuUq/69ltOT15l4
 X+gCz80lXMWBKw/kNoR4GQoAJo3KboMEociawwoj72HXEHTPLJnCdUOsAf3n+opj
 xuz/UPZ4WYSgKdnbmmDbJ+1POA1NqtARZZXpMVyKVVCOiLafbJkLQYwLKEpE2mOO
 TP9igzP1i3/jPWec8cJ6Fa8UwuGh
 =VGqV
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - add modpost warn exported symbols marked as 'static' because 'static'
   and EXPORT_SYMBOL is an odd combination

 - break the build early if gold linker is used

 - optimize the Bison rule to produce .c and .h files by a single
   pattern rule

 - handle PREEMPT_RT in the module vermagic and UTS_VERSION

 - warn CONFIG options leaked to the user-space except existing ones

 - make single targets work properly

 - rebuild modules when module linker scripts are updated

 - split the module final link stage into scripts/Makefile.modfinal

 - fix the missed error code in merge_config.sh

 - improve the error message displayed on the attempt of the O= build in
   unclean source tree

 - remove 'clean-dirs' syntax

 - disable -Wimplicit-fallthrough warning for Clang

 - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC

 - remove ARCH_{CPP,A,C}FLAGS variables

 - add $(BASH) to run bash scripts

 - change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
   instead of the basename

 - stop suppressing Clang's -Wunused-function warnings when W=1

 - fix linux/export.h to avoid genksyms calculating CRC of trimmed
   exported symbols

 - misc cleanups

* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
  genksyms: convert to SPDX License Identifier for lex.l and parse.y
  modpost: use __section in the output to *.mod.c
  modpost: use MODULE_INFO() for __module_depends
  export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
  export.h: remove defined(__KERNEL__), which is no longer needed
  kbuild: allow Clang to find unused static inline functions for W=1 build
  kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
  kbuild: refactor scripts/Makefile.extrawarn
  merge_config.sh: ignore unwanted grep errors
  kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
  modpost: add NOFAIL to strndup
  modpost: add guid_t type definition
  kbuild: add $(BASH) to run scripts with bash-extension
  kbuild: remove ARCH_{CPP,A,C}FLAGS
  kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
  kbuild: Do not enable -Wimplicit-fallthrough for clang for now
  kbuild: clean up subdir-ymn calculation in Makefile.clean
  kbuild: remove unneeded '+' marker from cmd_clean
  kbuild: remove clean-dirs syntax
  kbuild: check clean srctree even earlier
  ...
2019-09-20 08:36:47 -07:00
Linus Torvalds 671df18953 dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
    merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
  - rework handling of the pgprot bits for remapping (me)
  - take care of the dma direct infrastructure for swiotlb-xen (me)
  - improve the dma noncoherent remapping infrastructure (me)
  - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
  - cleanup mmaping of coherent DMA allocations (me)
  - various misc cleanups (Andy Shevchenko, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl2CSucLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPfrhAAgXZA/EdFPvkkCoDrmgtf3XkudX9gajeCd9g4NZy6
 ZBQElTVvm4S0sQj7IXgALnMumDMbbTibW5SQLX5GwQDe+XXBpZ8ajpAnJAXc8a5T
 qaFQ4SInr4CgBZf9nZKDkbSBZ1Tu3AQm1c0QI8riRCkrVTuX4L06xpCef4Yh4mgO
 rwWEjIioYpQiKZMmu98riXh3ZNfFG3mVJRhKt8B6XJbBgnUnjDOPYGgaUwp6CU20
 tFBKL2GaaV0vdLJ5wYhIGXT4DJ8tp9T5n3IYGZv1Ux889RaZEHlCrMxzelYeDbCT
 KhZbhcSECGnddsh73t/UX7/KhytuqnfKa9n+Xo6AWuA47xO4c36quOOcTk9M0vE5
 TfGDmewgL6WIv4lzokpRn5EkfDhyL33j8eYJrJ8e0ldcOhSQIFk4ciXnf2stWi6O
 JrlzzzSid+zXxu48iTfoPdnMr7psTpiMvvRvKfEeMp2FX9Fg6EdMzJYLTEl+COHB
 0WwNacZmY3P01+b5EZXEgqKEZevIIdmPKbyM9rPtTjz8BjBwkABHTpN3fWbVBf7/
 Ax6OPYyW40xp1fnJuzn89m3pdOxn88FpDdOaeLz892Zd+Qpnro1ayulnFspVtqGM
 mGbzA9whILvXNRpWBSQrvr2IjqMRjbBxX3BVACl3MMpOChgkpp5iANNfSDjCftSF
 Zu8=
 =/wGv
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
2019-09-19 13:27:23 -07:00
Linus Torvalds c6b48dad92 USB changes for 5.4-rc1
Here is the big set of USB patches for 5.4-rc1.
 
 Two major chunks of code are moving out of the tree and into the staging
 directory, uwb and wusb (wireless USB support), because there are no
 devices that actually use this protocol anymore, and what we have today
 probably doesn't work at all given that the maintainers left many many
 years ago.  So move it to staging where it will be removed in a few
 releases if no one screams.
 
 Other than that, lots of little things.  The usual gadget and xhci and
 usb serial driver updates, along with a bunch of sysfs file cleanups due
 to the driver core changes to support that.  Nothing really major, just
 constant forward progress.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIYYQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymn8ACfTi8Y2ku/yqw8Nvs4vQjc08MUDhgAoNnbhsI6
 H3HUrZTjJJzuxHCM22Lh
 =8ZRm
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.4-rc1.

  Two major chunks of code are moving out of the tree and into the
  staging directory, uwb and wusb (wireless USB support), because there
  are no devices that actually use this protocol anymore, and what we
  have today probably doesn't work at all given that the maintainers
  left many many years ago. So move it to staging where it will be
  removed in a few releases if no one screams.

  Other than that, lots of little things. The usual gadget and xhci and
  usb serial driver updates, along with a bunch of sysfs file cleanups
  due to the driver core changes to support that. Nothing really major,
  just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: usbcore: Fix slab-out-of-bounds bug during device reset
  usb: cdns3: Remove redundant dev_err call in cdns3_probe()
  USB: rio500: Fix lockdep violation
  USB: rio500: simplify locking
  usb: mtu3: register a USB Role Switch for dual role mode
  usb: common: add USB GPIO based connection detection driver
  usb: common: create Kconfig file
  usb: roles: get usb-role-switch from parent
  usb: roles: Add fwnode_usb_role_switch_get() function
  device connection: Add fwnode_connection_find_match()
  usb: roles: Introduce stubs for the exiting functions in role.h
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  dt-bindings: usb: add binding for USB GPIO based connection detection driver
  dt-bindings: connector: add optional properties for Type-B
  dt-binding: usb: add usb-role-switch property
  usbip: Implement SG support to vhci-hcd and stub driver
  usb: roles: intel: Enable static DRD mode for role switch
  xhci-ext-caps.c: Add property to disable Intel SW switch
  usb: dwc3: remove generic PHY calibrate() calls
  usb: core: phy: add support for PHY calibration
  ...
2019-09-18 10:33:46 -07:00
Linus Torvalds 16da0961d3 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
 "Only a single change, fix up header include in ColdFire specific GPIO
  handling code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: coldfire: Include the GPIO driver header
2019-09-17 13:34:28 -07:00
Matthias Maennich ed13fc33f7 export: explicitly align struct kernel_symbol
This change allows growing struct kernel_symbol without wasting bytes to
alignment. It also concretized the alignment of ksymtab entries if
relative references are used for ksymtab entries.

struct kernel_symbol was already implicitly being aligned to the word
size, except on x86_64 and m68k, where it is aligned to 16 and 2 bytes,
respectively.

As far as I can tell there is no requirement for aligning struct
kernel_symbol to 16 bytes on x86_64, but gcc aligns structs to their
size, and the linker aligns the custom __ksymtab sections to the largest
data type contained within, so setting KSYM_ALIGN to 16 was necessary to
stay consistent with the code generated for non-ASM EXPORT_SYMBOL(). Now
that non-ASM EXPORT_SYMBOL() explicitly aligns to word size (8),
KSYM_ALIGN is no longer necessary.

In case of relative references, the alignment has been changed
accordingly to not waste space when adding new struct members.

As for m68k, struct kernel_symbol is aligned to 2 bytes even though the
structure itself is 8 bytes; using a 4-byte alignment shouldn't hurt.

I manually verified the output of the __ksymtab sections didn't change
on x86, x86_64, arm, arm64 and m68k. As expected, the section contents
didn't change, and the ELF section alignment only changed on x86_64 and
m68k. Feedback from other archs more than welcome.

Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10 10:30:09 +02:00
Linus Walleij 372ea263b3 m68k: coldfire: Include the GPIO driver header
The Coldfire GPIO driver needs to explicitly incldue the
GPIO driver header since it is providing a driver.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-09-09 09:32:32 +10:00
Christoph Hellwig 62fcee9a3b dma-mapping: remove CONFIG_ARCH_NO_COHERENT_DMA_MMAP
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to
!CONFIG_MMU, so remove the separate symbol.  The only difference is that
arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping
implementation including its own mmap method, which is handled by moving
the CONFIG_MMU check in dma_can_mmap so that is only applies to the
dma-direct case, just as the other ifdefs for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
2019-09-04 11:13:18 +02:00
Christoph Hellwig 0f1979b402 m68k: Remove ioremap_fullcache()
No callers of this function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190830161237.23033-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-09-02 09:50:26 +02:00
Christoph Hellwig 2cecd1f11c m68k: Simplify ioremap_nocache()
Just define ioremap_nocache to ioremap instead of duplicating the
inline.  Also define ioremap_uc in terms of ioremap instead of
using a double indirection.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190817073253.27819-9-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-09-02 09:50:26 +02:00
Christoph Hellwig 419e2f1838 dma-mapping: remove arch_dma_mmap_pgprot
arch_dma_mmap_pgprot is used for two things:

 1) to override the "normal" uncached page attributes for mapping
    memory coherent to devices that can't snoop the CPU caches
 2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
    arm systems and some mips platforms

Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
Acked-by: Paul Burton <paul.burton@mips.com>		# mips
2019-08-29 16:43:22 +02:00
Christoph Hellwig cdfee56232 driver core: initialize a default DMA mask for platform device
We still treat devices without a DMA mask as defaulting to 32-bits for
both mask, but a few releases ago we've started warning about such
cases, as they require special cases to work around this sloppyness.
Add a dma_mask field to struct platform_device so that we can initialize
the dma_mask pointer in struct device and initialize both masks to
32-bits by default, replacing similar functionality in m68k and
powerpc.  The arch_setup_pdev_archdata hooks is now unused and removed.

Note that the code looks a little odd with the various conditionals
because we have to support platform_device structures that are
statically allocated.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20190816062435.881-7-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-22 09:41:55 -07:00
Masahiro Yamada 2ff2b7ec65 kbuild: add CONFIG_ASM_MODVERSIONS
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.

scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-22 01:14:11 +09:00
Masahiro Yamada 10df063855 kbuild: rebuild modules when module linker scripts are updated
Currently, the timestamp of module linker scripts are not checked.
Add them to the dependency of modules so they are correctly rebuilt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 21:05:21 +09:00
Geert Uytterhoeven 49ff824a02 m68k: defconfig: Update defconfigs for v5.3-rc2
Actual changes:
     -CONFIG_CHR_DEV_OSST=m
     +CONFIG_CRYPTO_AES=y
     +CONFIG_CRYPTO_ARC4=m
     +CONFIG_CRYPTO_XXHASH=m
     +CONFIG_NF_CONNTRACK_BRIDGE=m
     +CONFIG_NF_TABLES_BRIDGE=m
     -CONFIG_NF_TABLES_BRIDGE=y
     +CONFIG_NFT_BRIDGE_META=m
     +CONFIG_NFT_SYNPROXY=m
     +CONFIG_REED_SOLOMON_TEST=m
     +CONFIG_TEST_BLACKHOLE_DEV=m
     +CONFIG_TEST_MEMINIT=m
     -# CONFIG_VALIDATE_FS_PARSER is not set

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-19 13:24:10 +02:00
Geert Uytterhoeven 053b514295 m68k: atari: Rename shifter to shifter_st to avoid conflict
When test-compiling the BCM2835 pin control driver on m68k:

    In file included from arch/m68k/include/asm/io_mm.h:32:0,
                     from arch/m68k/include/asm/io.h:8,
                     from include/linux/io.h:13,
                     from include/linux/irq.h:20,
                     from include/linux/gpio/driver.h:7,
                     from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17:
    drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set':
    arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile'
     # define shifter ((*(volatile struct SHIFTER *)SHF_BAS))

"shifter" is a too generic name for a global definition.

As the corresponding definition for Atari TT is already called
"shifter_tt", fix this by renaming the definition for Atari ST to
"shifter_st".

Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-19 13:24:10 +02:00
Finn Thain 94c0439022 m68k: Prevent some compiler warnings in Coldfire builds
Since commit d3b41b6bb4 ("m68k: Dispatch nvram_ops calls to Atari or
Mac functions"), Coldfire builds generate compiler warnings due to the
unconditional inclusion of asm/atarihw.h and asm/macintosh.h.

The inclusion of asm/atarihw.h causes warnings like this:

In file included from ./arch/m68k/include/asm/atarihw.h:25:0,
                 from arch/m68k/kernel/setup_mm.c:41,
                 from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/raw_io.h:39:0: warning: "__raw_readb" redefined
 #define __raw_readb in_8

In file included from ./arch/m68k/include/asm/io.h:6:0,
                 from arch/m68k/kernel/setup_mm.c:36,
                 from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/io_no.h:16:0: note: this is the location of the previous definition
 #define __raw_readb(addr) \
...

This issue is resolved by dropping the asm/raw_io.h include. It turns out
that asm/io_mm.h already includes that header file.

Moving the relevant macro definitions helps to clarify this dependency
and make it safe to include asm/atarihw.h.

The other warnings look like this:

In file included from arch/m68k/kernel/setup_mm.c:48:0,
                 from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/macintosh.h:19:35: warning: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration
 extern void mac_irq_enable(struct irq_data *data);
                                   ^~~~~~~~
...

This issue is resolved by adding the missing linux/irq.h include.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-19 13:24:10 +02:00
Finn Thain aee6bff1c3 m68k: mac: Revisit floppy disc controller base addresses
Rename floppy_type macros to make them more consistent with the scsi_type
macros, which are named after classes of models with similar memory maps.

The MAC_FLOPPY_OLD symbol is introduced to change the relevant base
address from 0x50F00000 to 0x50000000 (consistent with MAC_SCSI_OLD).

The documentation for LC-class machines has the IO devices at offsets
from $50F00000. Use these addresses for MAC_FLOPPY_LC (consistent with
MAC_SCSI_LC) because they may not be aliased elsewhere in the memory map.

Add comments with controller type information from 'Designing Cards and
Drivers for the Macintosh Family', relevant Developer Notes and
http://mess.redump.net/mess/driver_info/mac_technical_notes

Adopt phys_addr_t to avoid type casts.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-19 13:24:10 +02:00
Christian Brauner 1a271a68e0
arch: mark syscall number 435 reserved for clone3
A while ago Arnd made it possible to give new system calls the same
syscall number on all architectures (except alpha). To not break this
nice new feature let's mark 435 for clone3 as reserved on all
architectures that do not yet implement it.
Even if an architecture does not plan to implement it this ensures that
new system calls coming after clone3 will have the same number on all
architectures.

Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/r/20190714192205.27190-2-christian@brauner.io
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-15 00:39:33 +02:00
Linus Torvalds ef8f3d48af Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
 "Am experimenting with splitting MM up into identifiable subsystems
  perhaps with a view to gitifying it in complex ways. Also with more
  verbose "incoming" emails.

  Most of MM is here and a few other trees.

  Subsystems affected by this patch series:
   - hotfixes
   - iommu
   - scripts
   - arch/sh
   - ocfs2
   - mm:slab-generic
   - mm:slub
   - mm:kmemleak
   - mm:kasan
   - mm:cleanups
   - mm:debug
   - mm:pagecache
   - mm:swap
   - mm:memcg
   - mm:gup
   - mm:pagemap
   - mm:infrastructure
   - mm:vmalloc
   - mm:initialization
   - mm:pagealloc
   - mm:vmscan
   - mm:tools
   - mm:proc
   - mm:ras
   - mm:oom-kill

  hotfixes:
      mm: vmscan: scan anonymous pages on file refaults
      mm/nvdimm: add is_ioremap_addr and use that to check ioremap address
      mm/memcontrol: fix wrong statistics in memory.stat
      mm/z3fold.c: lock z3fold page before  __SetPageMovable()
      nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header
      MAINTAINERS: nilfs2: update email address

  iommu:
      include/linux/dmar.h: replace single-char identifiers in macros

  scripts:
      scripts/decode_stacktrace: match basepath using shell prefix operator, not regex
      scripts/decode_stacktrace: look for modules with .ko.debug extension
      scripts/spelling.txt: drop "sepc" from the misspelling list
      scripts/spelling.txt: add spelling fix for prohibited
      scripts/decode_stacktrace: Accept dash/underscore in modules
      scripts/spelling.txt: add more spellings to spelling.txt

  arch/sh:
      arch/sh/configs/sdk7786_defconfig: remove CONFIG_LOGFS
      sh: config: remove left-over BACKLIGHT_LCD_SUPPORT
      sh: prevent warnings when using iounmap

  ocfs2:
      fs: ocfs: fix spelling mistake "hearbeating" -> "heartbeat"
      ocfs2/dlm: use struct_size() helper
      ocfs2: add last unlock times in locking_state
      ocfs2: add locking filter debugfs file
      ocfs2: add first lock wait time in locking_state
      ocfs: no need to check return value of debugfs_create functions
      fs/ocfs2/dlmglue.c: unneeded variable: "status"
      ocfs2: use kmemdup rather than duplicating its implementation

  mm:slab-generic:
    Patch series "mm/slab: Improved sanity checking":
      mm/slab: validate cache membership under freelist hardening
      mm/slab: sanity-check page type when looking up cache
      lkdtm/heap: add tests for freelist hardening

  mm:slub:
      mm/slub.c: avoid double string traverse in kmem_cache_flags()
      slub: don't panic for memcg kmem cache creation failure

  mm:kmemleak:
      mm/kmemleak.c: fix check for softirq context
      mm/kmemleak.c: change error at _write when kmemleak is disabled
      docs: kmemleak: add more documentation details

  mm:kasan:
      mm/kasan: print frame description for stack bugs
      Patch series "Bitops instrumentation for KASAN", v5:
        lib/test_kasan: add bitops tests
        x86: use static_cpu_has in uaccess region to avoid instrumentation
        asm-generic, x86: add bitops instrumentation for KASAN
      Patch series "mm/kasan: Add object validation in ksize()", v3:
        mm/kasan: introduce __kasan_check_{read,write}
        mm/kasan: change kasan_check_{read,write} to return boolean
        lib/test_kasan: Add test for double-kzfree detection
        mm/slab: refactor common ksize KASAN logic into slab_common.c
        mm/kasan: add object validation in ksize()

  mm:cleanups:
      include/linux/pfn_t.h: remove pfn_t_to_virt()
      Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect":
        arm: remove ARCH_SELECT_MEMORY_MODEL
        s390: remove ARCH_SELECT_MEMORY_MODEL
        sparc: remove ARCH_SELECT_MEMORY_MODEL
      mm/gup.c: make follow_page_mask() static
      mm/memory.c: trivial clean up in insert_page()
      mm: make !CONFIG_HUGE_PAGE wrappers into static inlines
      include/linux/mm_types.h: ifdef struct vm_area_struct::swap_readahead_info
      mm: remove the account_page_dirtied export
      mm/page_isolation.c: change the prototype of undo_isolate_page_range()
      include/linux/vmpressure.h: use spinlock_t instead of struct spinlock
      mm: remove the exporting of totalram_pages
      include/linux/pagemap.h: document trylock_page() return value

  mm:debug:
      mm/failslab.c: by default, do not fail allocations with direct reclaim only
      Patch series "debug_pagealloc improvements":
        mm, debug_pagelloc: use static keys to enable debugging
        mm, page_alloc: more extensive free page checking with debug_pagealloc
        mm, debug_pagealloc: use a page type instead of page_ext flag

  mm:pagecache:
      Patch series "fix filler_t callback type mismatches", v2:
        mm/filemap.c: fix an overly long line in read_cache_page
        mm/filemap: don't cast ->readpage to filler_t for do_read_cache_page
        jffs2: pass the correct prototype to read_cache_page
        9p: pass the correct prototype to read_cache_page
      mm/filemap.c: correct the comment about VM_FAULT_RETRY

  mm:swap:
      mm, swap: fix race between swapoff and some swap operations
      mm/swap_state.c: simplify total_swapcache_pages() with get_swap_device()
      mm, swap: use rbtree for swap_extent
      mm/mincore.c: fix race between swapoff and mincore

  mm:memcg:
      memcg, oom: no oom-kill for __GFP_RETRY_MAYFAIL
      memcg, fsnotify: no oom-kill for remote memcg charging
      mm, memcg: introduce memory.events.local
      mm: memcontrol: dump memory.stat during cgroup OOM
      Patch series "mm: reparent slab memory on cgroup removal", v7:
        mm: memcg/slab: postpone kmem_cache memcg pointer initialization to memcg_link_cache()
        mm: memcg/slab: rename slab delayed deactivation functions and fields
        mm: memcg/slab: generalize postponed non-root kmem_cache deactivation
        mm: memcg/slab: introduce __memcg_kmem_uncharge_memcg()
        mm: memcg/slab: unify SLAB and SLUB page accounting
        mm: memcg/slab: don't check the dying flag on kmem_cache creation
        mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock
        mm: memcg/slab: rework non-root kmem_cache lifecycle management
        mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages
        mm: memcg/slab: reparent memcg kmem_caches on cgroup removal
      mm, memcg: add a memcg_slabinfo debugfs file

  mm:gup:
      Patch series "switch the remaining architectures to use generic GUP", v4:
        mm: use untagged_addr() for get_user_pages_fast addresses
        mm: simplify gup_fast_permitted
        mm: lift the x86_32 PAE version of gup_get_pte to common code
        MIPS: use the generic get_user_pages_fast code
        sh: add the missing pud_page definition
        sh: use the generic get_user_pages_fast code
        sparc64: add the missing pgd_page definition
        sparc64: define untagged_addr()
        sparc64: use the generic get_user_pages_fast code
        mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUP
        mm: reorder code blocks in gup.c
        mm: consolidate the get_user_pages* implementations
        mm: validate get_user_pages_fast flags
        mm: move the powerpc hugepd code to mm/gup.c
        mm: switch gup_hugepte to use try_get_compound_head
        mm: mark the page referenced in gup_hugepte
      mm/gup: speed up check_and_migrate_cma_pages() on huge page
      mm/gup.c: remove some BUG_ONs from get_gate_page()
      mm/gup.c: mark undo_dev_pagemap as __maybe_unused

  mm:pagemap:
      asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel]
      alpha: switch to generic version of pte allocation
      arm: switch to generic version of pte allocation
      arm64: switch to generic version of pte allocation
      csky: switch to generic version of pte allocation
      m68k: sun3: switch to generic version of pte allocation
      mips: switch to generic version of pte allocation
      nds32: switch to generic version of pte allocation
      nios2: switch to generic version of pte allocation
      parisc: switch to generic version of pte allocation
      riscv: switch to generic version of pte allocation
      um: switch to generic version of pte allocation
      unicore32: switch to generic version of pte allocation
      mm/pgtable: drop pgtable_t variable from pte_fn_t functions
      mm/memory.c: fail when offset == num in first check of __vm_map_pages()

  mm:infrastructure:
      mm/mmu_notifier: use hlist_add_head_rcu()

  mm:vmalloc:
      Patch series "Some cleanups for the KVA/vmalloc", v5:
        mm/vmalloc.c: remove "node" argument
        mm/vmalloc.c: preload a CPU with one object for split purpose
        mm/vmalloc.c: get rid of one single unlink_va() when merge
        mm/vmalloc.c: switch to WARN_ON() and move it under unlink_va()
      mm/vmalloc.c: spelling> s/informaion/information/

  mm:initialization:
      mm/large system hash: use vmalloc for size > MAX_ORDER when !hashdist
      mm/large system hash: clear hashdist when only one node with memory is booted

  mm:pagealloc:
      arm64: move jump_label_init() before parse_early_param()
      Patch series "add init_on_alloc/init_on_free boot options", v10:
        mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options
        mm: init: report memory auto-initialization features at boot time

  mm:vmscan:
      mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned
      mm: vmscan: correct some vmscan counters for THP swapout

  mm:tools:
      tools/vm/slabinfo: order command line options
      tools/vm/slabinfo: add partial slab listing to -X
      tools/vm/slabinfo: add option to sort by partial slabs
      tools/vm/slabinfo: add sorting info to help menu

  mm:proc:
      proc: use down_read_killable mmap_sem for /proc/pid/maps
      proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
      proc: use down_read_killable mmap_sem for /proc/pid/pagemap
      proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
      proc: use down_read_killable mmap_sem for /proc/pid/map_files
      mm: use down_read_killable for locking mmap_sem in access_remote_vm
      mm: smaps: split PSS into components
      mm: vmalloc: show number of vmalloc pages in /proc/meminfo

  mm:ras:
      mm/memory-failure.c: clarify error message

  mm:oom-kill:
      mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks()
      mm, oom: refactor dump_tasks for memcg OOMs
      mm, oom: remove redundant task_in_mem_cgroup() check
      oom: decouple mems_allowed from oom_unkillable_task
      mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process()"

* akpm: (147 commits)
  mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process()
  oom: decouple mems_allowed from oom_unkillable_task
  mm, oom: remove redundant task_in_mem_cgroup() check
  mm, oom: refactor dump_tasks for memcg OOMs
  mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks()
  mm/memory-failure.c: clarify error message
  mm: vmalloc: show number of vmalloc pages in /proc/meminfo
  mm: smaps: split PSS into components
  mm: use down_read_killable for locking mmap_sem in access_remote_vm
  proc: use down_read_killable mmap_sem for /proc/pid/map_files
  proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
  proc: use down_read_killable mmap_sem for /proc/pid/pagemap
  proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
  proc: use down_read_killable mmap_sem for /proc/pid/maps
  tools/vm/slabinfo: add sorting info to help menu
  tools/vm/slabinfo: add option to sort by partial slabs
  tools/vm/slabinfo: add partial slab listing to -X
  tools/vm/slabinfo: order command line options
  mm: vmscan: correct some vmscan counters for THP swapout
  mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned
  ...
2019-07-12 11:40:28 -07:00
Mike Rapoport 14c0a39c9a m68k: sun3: switch to generic version of pte allocation
The sun3 MMU variant of m68k uses GFP_KERNEL to allocate a PTE page and
then memset(0) or clear_highpage() to clear it.

This is equivalent to allocating the page with GFP_KERNEL | __GFP_ZERO,
which allows replacing sun3 implementation of pte_alloc_one() and
pte_alloc_one_kernel() with the generic ones.

The pte_free() and pte_free_kernel() versions are identical to the generic
ones and can be simply dropped.

Link: http://lkml.kernel.org/r/1557296232-15361-8-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 11:05:45 -07:00
Linus Torvalds ba6d10ab80 SCSI misc on 20190709
This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
 mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
 removal of the osst driver (I heard from Willem privately that he
 would like the driver removed because all his test hardware has
 failed).  Plus number of minor changes, spelling fixes and other
 trivia.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTl4yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdcxAQDCJVbd
 fPUX76/V1ldupunF97+3DTharxxbst+VnkOnCwD8D4c0KFFFOI9+F36cnMGCPegE
 fjy17dQLvsJ4GsidHy8=
 =aS5B
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...
2019-07-11 15:14:01 -07:00
Linus Torvalds 5450e8a316 pidfd-updates-v5.3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSMhUgAKCRCRxhvAZXjc
 okkiAQC3Hlg/O2JoIb4PqgEvBkpHSdVxyuWagn0ksjACW9ANKQEAl5OadMhvOq16
 UHGhKlpE/M8HflknIffoEGlIAWHrdwU=
 =7kP5
 -----END PGP SIGNATURE-----

Merge tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd updates from Christian Brauner:
 "This adds two main features.

   - First, it adds polling support for pidfds. This allows process
     managers to know when a (non-parent) process dies in a race-free
     way.

     The notification mechanism used follows the same logic that is
     currently used when the parent of a task is notified of a child's
     death. With this patchset it is possible to put pidfds in an
     {e}poll loop and get reliable notifications for process (i.e.
     thread-group) exit.

   - The second feature compliments the first one by making it possible
     to retrieve pollable pidfds for processes that were not created
     using CLONE_PIDFD.

     A lot of processes get created with traditional PID-based calls
     such as fork() or clone() (without CLONE_PIDFD). For these
     processes a caller can currently not create a pollable pidfd. This
     is a problem for Android's low memory killer (LMK) and service
     managers such as systemd.

  Both patchsets are accompanied by selftests.

  It's perhaps worth noting that the work done so far and the work done
  in this branch for pidfd_open() and polling support do already see
  some adoption:

   - Android is in the process of backporting this work to all their LTS
     kernels [1]

   - Service managers make use of pidfd_send_signal but will need to
     wait until we enable waiting on pidfds for full adoption.

   - And projects I maintain make use of both pidfd_send_signal and
     CLONE_PIDFD [2] and will use polling support and pidfd_open() too"

[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22
    https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22
    https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22

[2] aab6e3eb73/src/lxc/start.c (L1753)

* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add pidfd_open() tests
  arch: wire-up pidfd_open()
  pid: add pidfd_open()
  pidfd: add polling selftests
  pidfd: add polling support
2019-07-10 22:17:21 -07:00
Linus Torvalds 29cd581b59 m68k updates for v5.3 (take two)
- Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXSXP0xUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XCjtAEAiqVBOG4QAWdyk3DOUvDPZ7V5CqjP
 IH5WXOUMRSd21EcBAKwmPFe7vmcNjq5XkCvIVxcLBSGbyy+cZFL9Cunv4N4K
 =67YF
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v5.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k fix from Geert Uytterhoeven:
 "Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire.

  This is a fix for an issue detected in next, to avoid introducing
  build failures when merging Christoph's dma-mapping tree later"

* tag 'm68k-for-v5.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire
2019-07-10 21:44:07 -07:00
Linus Torvalds 398364a35d Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68nommu updates from Greg Ungerer:
 "A series of cleanups for the FLAT format binary loader, binfmt_flat,
  from Christoph.

  The end goal is to support no-MMU on RISC-V, and the last patch
  enables that"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  riscv: add binfmt_flat support
  binfmt_flat: don't offset the data start
  binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c
  binfmt_flat: remove the persistent argument from flat_get_addr_from_rp
  binfmt_flat: provide an asm-generic/flat.h
  binfmt_flat: make support for old format binaries optional
  binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option
  binfmt_flat: add endianess annotations
  binfmt_flat: use fixed size type for the on-disk format
  binfmt_flat: consolidate two version of flat_v2_reloc_t
  binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition
  binfmt_flat: remove the uapi <linux/flat.h> header
  binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable
  binfmt_flat: remove flat_old_ram_flag
  binfmt_flat: provide a default version of flat_get_relocate_addr
  binfmt_flat: remove flat_set_persistent
  binfmt_flat: remove flat_reloc_valid
2019-07-10 21:42:03 -07:00
Linus Torvalds e9a83bd232 It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro.  These create more
    than the usual number of simple but annoying merge conflicts with other
    trees, unfortunately.  He has a lot more of these waiting on the wings
    that, I think, will go to you directly later on.
 
  - A new document on how to use merges and rebases in kernel repos, and one
    on Spectre vulnerabilities.
 
  - Various improvements to the build system, including automatic markup of
    function() references because some people, for reasons I will never
    understand, were of the opinion that :c:func:``function()`` is
    unattractive and not fun to type.
 
  - We now recommend using sphinx 1.7, but still support back to 1.4.
 
  - Lots of smaller improvements, warning fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
 gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
 raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
 3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
 DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
 dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
 =D0eO
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
2019-07-09 12:34:26 -07:00
Christoph Hellwig f28a1f1613 m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire
M68k only provides the arch_dma_prep_coherent symbol when an mmu is
enabled and not on the coldfire platform.  Fix the Kconfig symbol
selection up to match this.

Fixes: 69878ef475 ("m68k: Implement arch_dma_prep_coherent()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-07-09 09:13:24 +02:00
Linus Torvalds 5ad18b2e60 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...
2019-07-08 21:48:15 -07:00
Linus Torvalds 278ecbf027 m68k updates for v5.3
- Switch to using the generic remapping DMA allocator,
   - Defconfig updates.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXSL2rhUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XBcgQEAgcOMl12clyZtus960R+OpKhTyjn/
 oTPrDFu/jSj2ZY0BAPg9KaQjMhInXHzRs5S9IbwKcbsWogRGg76NbR09ehsM
 =9T08
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

  - switch to using the generic remapping DMA allocator

  - defconfig updates

* tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Implement arch_dma_prep_coherent()
  m68k: Use the generic dma coherent remap allocator
  m68k: defconfig: Update defconfigs for v5.2-rc1
2019-07-08 10:00:58 -07:00