Commit Graph

114 Commits

Author SHA1 Message Date
Greg Kroah-Hartman 0ff21e4663 kobject: convert kernel_kset to be a kobject
kernel_kset does not need to be a kset, but a much simpler kobject now
that we have kobj_attributes.

We also rename kernel_kset to kernel_kobj to catch all users of this
symbol with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Greg Kroah-Hartman 081248de0a kset: move /sys/slab to /sys/kernel/slab
/sys/kernel is where these things should go.
Also updated the documentation and tool that used this directory.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:16 -08:00
Greg Kroah-Hartman 27c3a314d5 kset: convert slub to use kset_create
Dynamically create the kset instead of declaring it statically.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:15 -08:00
Greg Kroah-Hartman 3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
Linus Torvalds 158a962422 Unify /proc/slabinfo configuration
Both SLUB and SLAB really did almost exactly the same thing for
/proc/slabinfo setup, using duplicate code and per-allocator #ifdef's.

This just creates a common CONFIG_SLABINFO that is enabled by both SLUB
and SLAB, and shares all the setup code.  Maybe SLOB will want this some
day too.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02 13:04:48 -08:00
Pekka J Enberg 57ed3eda97 slub: provide /proc/slabinfo
This adds a read-only /proc/slabinfo file on SLUB, that makes slabtop work.

[ mingo@elte.hu: build fix. ]

Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-01 11:32:02 -08:00
Christoph Lameter 76be895001 SLUB: Improve hackbench speed
Increase the mininum number of partial slabs to keep around and put
partial slabs to the end of the partial queue so that they can add
more objects.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-21 15:51:07 -08:00
Christoph Lameter 3811dbf671 SLUB: remove useless masking of GFP_ZERO
Remove a recently added useless masking of GFP_ZERO.  GFP_ZERO is already
masked out in new_slab() (See how it calls allocate_slab).  No need to do
it twice.

This reverts the SLUB parts of 7fd272550b.

Cc: Matt Mackall <mpm@selenic.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Linus Torvalds 7fd272550b Avoid double memclear() in SLOB/SLUB
Both slob and slub react to __GFP_ZERO by clearing the allocation, which
means that passing the GFP_ZERO bit down to the page allocator is just
wasteful and pointless.

Acked-by: Matt Mackall <mpm@selenic.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-09 10:17:52 -08:00
Vegard Nossum 294a80a8ed SLUB's ksize() fails for size > 2048
I can't pass memory allocated by kmalloc() to ksize() if it is allocated by
SLUB allocator and size is larger than (I guess) PAGE_SIZE / 2.

The error of ksize() seems to be that it does not check if the allocation
was made by SLUB or the page allocator.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Christoph Lameter <clameter@sgi.com>, Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:20 -08:00
Denis Cheng efe44183f6 SLUB: killed the unused "end" variable
Since the macro "for_each_object" introduced, the "end" variable becomes unused anymore.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12 10:32:29 -08:00
Christoph Lameter 05aa345034 SLUB: Fix memory leak by not reusing cpu_slab
Fix the memory leak that may occur when we attempt to reuse a cpu_slab
that was allocated while we reenabled interrupts in order to be able to
grow a slab cache.

The per cpu freelist may contain objects and in that situation we may
overwrite the per cpu freelist pointer loosing objects.  This only
occurs if we find that the concurrently allocated slab fits our
allocation needs.

If we simply always deactivate the slab then the freelist will be
properly reintegrated and the memory leak will go away.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05 11:37:12 -08:00
Al Viro 27bb628a1d missing atomic_read_long() in slub.c
nr_slabs is atomic_long_t, not atomic_t

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29 07:41:32 -07:00
Yasunori Goto b9049e2344 memory hotplug: make kmem_cache_node for SLUB on memory online avoid panic
Fix a panic due to access NULL pointer of kmem_cache_node at discard_slab()
after memory online.

When memory online is called, kmem_cache_nodes are created for all SLUBs
for new node whose memory are available.

slab_mem_going_online_callback() is called to make kmem_cache_node() in
callback of memory online event.  If it (or other callbacks) fails, then
slab_mem_offline_callback() is called for rollback.

In memory offline, slab_mem_going_offline_callback() is called to shrink
all slub cache, then slab_mem_offline_callback() is called later.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: locking fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:17 -07:00
Christoph Lameter 4ba9b9d0ba Slab API: remove useless ctor parameter and reorder parameters
Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Christoph Lameter b811c202a0 SLUB: simplify IRQ off handling
Move irq handling out of new slab into __slab_alloc.  That is useful for
Mathieu's cmpxchg_local patchset and also allows us to remove the crude
local_irq_off in early_kmem_cache_alloc().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Andrew Morton ea3061d227 slub: list_locations() can use GFP_TEMPORARY
It's a short-lived allocation.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Christoph Lameter 42a9fdbb12 SLUB: Optimize cacheline use for zeroing
We touch a cacheline in the kmem_cache structure for zeroing to get the
size. However, the hot paths in slab_alloc and slab_free do not reference
any other fields in kmem_cache, so we may have to just bring in the
cacheline for this one access.

Add a new field to kmem_cache_cpu that contains the object size. That
cacheline must already be used in the hotpaths. So we save one cacheline
on every slab_alloc if we zero.

We need to update the kmem_cache_cpu object size if an aliasing operation
changes the objsize of an non debug slab.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Christoph Lameter 4c93c355d5 SLUB: Place kmem_cache_cpu structures in a NUMA aware way
The kmem_cache_cpu structures introduced are currently an array placed in the
kmem_cache struct. Meaning the kmem_cache_cpu structures are overwhelmingly
on the wrong node for systems with a higher amount of nodes. These are
performance critical structures since the per node information has
to be touched for every alloc and free in a slab.

In order to place the kmem_cache_cpu structure optimally we put an array
of pointers to kmem_cache_cpu structs in kmem_cache (similar to SLAB).

However, the kmem_cache_cpu structures can now be allocated in a more
intelligent way.

We would like to put per cpu structures for the same cpu but different
slab caches in cachelines together to save space and decrease the cache
footprint. However, the slab allocators itself control only allocations
per node. We set up a simple per cpu array for every processor with
100 per cpu structures which is usually enough to get them all set up right.
If we run out then we fall back to kmalloc_node. This also solves the
bootstrap problem since we do not have to use slab allocator functions
early in boot to get memory for the small per cpu structures.

Pro:
	- NUMA aware placement improves memory performance
	- All global structures in struct kmem_cache become readonly
	- Dense packing of per cpu structures reduces cacheline
	  footprint in SMP and NUMA.
	- Potential avoidance of exclusive cacheline fetches
	  on the free and alloc hotpath since multiple kmem_cache_cpu
	  structures are in one cacheline. This is particularly important
	  for the kmalloc array.

Cons:
	- Additional reference to one read only cacheline (per cpu
	  array of pointers to kmem_cache_cpu) in both slab_alloc()
	  and slab_free().

[akinobu.mita@gmail.com: fix cpu hotplug offline/online path]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: "Pekka Enberg" <penberg@cs.helsinki.fi>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Christoph Lameter ee3c72a14b SLUB: Avoid touching page struct when freeing to per cpu slab
Set c->node to -1 if we allocate from a debug slab instead for SlabDebug
which requires access the page struct cacheline.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Christoph Lameter b3fba8da65 SLUB: Move page->offset to kmem_cache_cpu->offset
We need the offset from the page struct during slab_alloc and slab_free. In
both cases we also reference the cacheline of the kmem_cache_cpu structure.
We can therefore move the offset field into the kmem_cache_cpu structure
freeing up 16 bits in the page struct.

Moving the offset allows an allocation from slab_alloc() without touching the
page struct in the hot path.

The only thing left in slab_free() that touches the page struct cacheline for
per cpu freeing is the checking of SlabDebug(page). The next patch deals with
that.

Use the available 16 bits to broaden page->inuse. More than 64k objects per
slab become possible and we can get rid of the checks for that limitation.

No need anymore to shrink the order of slabs if we boot with 2M sized slabs
(slub_min_order=9).

No need anymore to switch off the offset calculation for very large slabs
since the field in the kmem_cache_cpu structure is 32 bits and so the offset
field can now handle slab sizes of up to 8GB.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Christoph Lameter 8e65d24c7c SLUB: Do not use page->mapping
After moving the lockless_freelist to kmem_cache_cpu we no longer need
page->lockless_freelist. Restructure the use of the struct page fields in
such a way that we never touch the mapping field.

This is turn allows us to remove the special casing of SLUB when determining
the mapping of a page (needed for corner cases of virtual caches machines that
need to flush caches of processors mapping a page).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Christoph Lameter dfb4f09609 SLUB: Avoid page struct cacheline bouncing due to remote frees to cpu slab
A remote free may access the same page struct that also contains the lockless
freelist for the cpu slab. If objects have a short lifetime and are freed by
a different processor then remote frees back to the slab from which we are
currently allocating are frequent. The cacheline with the page struct needs
to be repeately acquired in exclusive mode by both the allocating thread and
the freeing thread. If this is frequent enough then performance will suffer
because of cacheline bouncing.

This patchset puts the lockless_freelist pointer in its own cacheline. In
order to make that happen we introduce a per cpu structure called
kmem_cache_cpu.

Instead of keeping an array of pointers to page structs we now keep an array
to a per cpu structure that--among other things--contains the pointer to the
lockless freelist. The freeing thread can then keep possession of exclusive
access to the page struct cacheline while the allocating thread keeps its
exclusive access to the cacheline containing the per cpu structure.

This works as long as the allocating cpu is able to service its request
from the lockless freelist. If the lockless freelist runs empty then the
allocating thread needs to acquire exclusive access to the cacheline with
the page struct lock the slab.

The allocating thread will then check if new objects were freed to the per
cpu slab. If so it will keep the slab as the cpu slab and continue with the
recently remote freed objects. So the allocating thread can take a series
of just freed remote pages and dish them out again. Ideally allocations
could be just recycling objects in the same slab this way which will lead
to an ideal allocation / remote free pattern.

The number of objects that can be handled in this way is limited by the
capacity of one slab. Increasing slab size via slub_min_objects/
slub_max_order may increase the number of objects and therefore performance.

If the allocating thread runs out of objects and finds that no objects were
put back by the remote processor then it will retrieve a new slab (from the
partial lists or from the page allocator) and start with a whole
new set of objects while the remote thread may still be freeing objects to
the old cpu slab. This may then repeat until the new slab is also exhausted.
If remote freeing has freed objects in the earlier slab then that earlier
slab will now be on the partial freelist and the allocating thread will
pick that slab next for allocation. So the loop is extended. However,
both threads need to take the list_lock to make the swizzling via
the partial list happen.

It is likely that this kind of scheme will keep the objects being passed
around to a small set that can be kept in the cpu caches leading to increased
performance.

More code cleanups become possible:

- Instead of passing a cpu we can now pass a kmem_cache_cpu structure around.
  Allows reducing the number of parameters to various functions.
- Can define a new node_match() function for NUMA to encapsulate locality
  checks.

Effect on allocations:

Cachelines touched before this patch:

	Write:	page cache struct and first cacheline of object

Cachelines touched after this patch:

	Write:	kmem_cache_cpu cacheline and first cacheline of object
	Read: page cache struct (but see later patch that avoids touching
		that cacheline)

The handling when the lockless alloc list runs empty gets to be a bit more
complicated since another cacheline has now to be written to. But that is
halfway out of the hot path.

Effect on freeing:

Cachelines touched before this patch:

	Write: page_struct and first cacheline of object

Cachelines touched after this patch depending on how we free:

  Write(to cpu_slab):	kmem_cache_cpu struct and first cacheline of object
  Write(to other):	page struct and first cacheline of object

  Read(to cpu_slab):	page struct to id slab etc. (but see later patch that
  			avoids touching the page struct on free)
  Read(to other):	cpu local kmem_cache_cpu struct to verify its not
  			the cpu slab.

Summary:

Pro:
	- Distinct cachelines so that concurrent remote frees and local
	  allocs on a cpuslab can occur without cacheline bouncing.
	- Avoids potential bouncing cachelines because of neighboring
	  per cpu pointer updates in kmem_cache's cpu_slab structure since
	  it now grows to a cacheline (Therefore remove the comment
	  that talks about that concern).

Cons:
	- Freeing objects now requires the reading of one additional
	  cacheline. That can be mitigated for some cases by the following
	  patches but its not possible to completely eliminate these
	  references.

	- Memory usage grows slightly.

	The size of each per cpu object is blown up from one word
	(pointing to the page_struct) to one cacheline with various data.
	So this is NR_CPUS*NR_SLABS*L1_BYTES more memory use. Lets say
	NR_SLABS is 100 and a cache line size of 128 then we have just
	increased SLAB metadata requirements by 12.8k per cpu.
	(Another later patch reduces these requirements)

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Mel Gorman e12ba74d8f Group short-lived and reclaimable kernel allocations
This patch marks a number of allocations that are either short-lived such as
network buffers or are reclaimable such as inode allocations.  When something
like updatedb is called, long-lived and unmovable kernel allocations tend to
be spread throughout the address space which increases fragmentation.

This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE.  The MIGRATE_RECLAIMABLE type is for allocations that can be
reclaimed on demand, but not moved.  i.e.  they can be migrated by deleting
them and re-reading the information from elsewhere.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:00 -07:00
Christoph Lameter 6cb062296f Categorize GFP flags
The function of GFP_LEVEL_MASK seems to be unclear.  In order to clear up
the mystery we get rid of it and replace GFP_LEVEL_MASK with 3 sets of GFP
flags:

GFP_RECLAIM_MASK	Flags used to control page allocator reclaim behavior.

GFP_CONSTRAINT_MASK	Flags used to limit where allocations can occur.

GFP_SLAB_BUG_MASK	Flags that the slab allocator BUG()s on.

These replace the uses of GFP_LEVEL mask in the slab allocators and in
vmalloc.c.

The use of the flags not included in these sets may occur as a result of a
slab allocation standing in for a page allocation when constructing scatter
gather lists.  Extraneous flags are cleared and not passed through to the
page allocator.  __GFP_MOVABLE/RECLAIMABLE, __GFP_COLD and __GFP_COMP will
now be ignored if passed to a slab allocator.

Change the allocation of allocator meta data in SLAB and vmalloc to not
pass through flags listed in GFP_CONSTRAINT_MASK.  SLAB already removes the
__GFP_THISNODE flag for such allocations.  Generalize that to also cover
vmalloc.  The use of GFP_CONSTRAINT_MASK also includes __GFP_HARDWALL.

The impact of allocator metadata placement on access latency to the
cachelines of the object itself is minimal since metadata is only
referenced on alloc and free.  The attempt is still made to place the meta
data optimally but we consistently allow fallback both in SLAB and vmalloc
(SLUB does not need to allocate metadata like that).

Allocator metadata may serve multiple in kernel users and thus should not
be subject to the limitations arising from a single allocation context.

[akpm@linux-foundation.org: fix fallback_alloc()]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
Christoph Lameter f64dc58c54 Memoryless nodes: SLUB support
Simply switch all for_each_online_node to for_each_node_state(NORMAL_MEMORY).
That way SLUB only operates on nodes with regular memory.  Any allocation
attempt on a memoryless node or a node with just highmem will fall whereupon
SLUB will fetch memory from a nearby node (depending on how memory policies
and cpuset describe fallback).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:58 -07:00
Christoph Lameter ef8b4520bd Slab allocators: fail if ksize is called with a NULL parameter
A NULL pointer means that the object was not allocated.  One cannot
determine the size of an object that has not been allocated.  Currently we
return 0 but we really should BUG() on attempts to determine the size of
something nonexistent.

krealloc() interprets NULL to mean a zero sized object.  Handle that
separately in krealloc().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Satyam Sharma 2408c55037 {slub, slob}: use unlikely() for kfree(ZERO_OR_NULL_PTR) check
Considering kfree(NULL) would normally occur only in error paths and
kfree(ZERO_SIZE_PTR) is uncommon as well, so let's use unlikely() for the
condition check in SLUB's and SLOB's kfree() to optimize for the common
case.  SLAB has this already.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Christoph Lameter aadb4bc4a1 SLUB: direct pass through of page size or higher kmalloc requests
This gets rid of all kmalloc caches larger than page size.  A kmalloc
request larger than PAGE_SIZE > 2 is going to be passed through to the page
allocator.  This works both inline where we will call __get_free_pages
instead of kmem_cache_alloc and in __kmalloc.

kfree is modified to check if the object is in a slab page. If not then
the page is freed via the page allocator instead. Roughly similar to what
SLOB does.

Advantages:
- Reduces memory overhead for kmalloc array
- Large kmalloc operations are faster since they do not
  need to pass through the slab allocator to get to the
  page allocator.
- Performance increase of 10%-20% on alloc and 50% on free for
  PAGE_SIZEd allocations.
  SLUB must call page allocator for each alloc anyways since
  the higher order pages which that allowed avoiding the page alloc calls
  are not available in a reliable way anymore. So we are basically removing
  useless slab allocator overhead.
- Large kmallocs yields page aligned object which is what
  SLAB did. Bad things like using page sized kmalloc allocations to
  stand in for page allocate allocs can be transparently handled and are not
  distinguishable from page allocator uses.
- Checking for too large objects can be removed since
  it is done by the page allocator.

Drawbacks:
- No accounting for large kmalloc slab allocations anymore
- No debugging of large kmalloc slab allocations.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Adrian Bunk 1cd7daa51b slub.c:early_kmem_cache_node_alloc() shouldn't be __init
WARNING: mm/built-in.o(.text+0x24bd3): Section mismatch: reference to .init.text:early_kmem_cache_node_alloc (between 'init_kmem_cache_nodes' and 'calculate_sizes')
...

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:51 -07:00
Christoph Lameter ba0268a8b0 SLUB: accurately compare debug flags during slab cache merge
This was posted on Aug 28 and fixes an issue that could cause troubles
when slab caches >=128k are created.

http://marc.info/?l=linux-mm&m=118798149918424&w=2

Currently we simply add the debug flags unconditional when checking for a
matching slab.  This creates issues for sysfs processing when slabs exist
that are exempt from debugging due to their huge size or because only a
subset of slabs was selected for debugging.

We need to only add the flags if kmem_cache_open() would also add them.

Create a function to calculate the flags that would be set
if the cache would be opened and use that function to determine
the flags before looking for a compatible slab.

[akpm@linux-foundation.org: fixlets]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:27 -07:00
Christoph Lameter 5d540fb715 slub: do not fail if we cannot register a slab with sysfs
Do not BUG() if we cannot register a slab with sysfs.  Just print an error.
 The only consequence of not registering is that the slab cache is not
visible via /sys/slab.  A BUG() may not be visible that early during boot
and we have had multiple issues here already.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
Christoph Lameter a2f92ee7e7 SLUB: do not fail on broken memory configurations
Print a big fat warning and do what is necessary to continue if a node is
marked as up (meaning either node is online (upstream) or node has memory
(Andrew's tree)) but allocations from the node do not succeed.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:47 -07:00
Christoph Lameter 9e86943b6c SLUB: use atomic_long_read for atomic_long variables
SLUB is using atomic_read() for variables declared atomic_long_t.
Switch to atomic_long_read().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:47 -07:00
Christoph Lameter 1ceef40249 SLUB: Fix dynamic dma kmalloc cache creation
The dynamic dma kmalloc creation can run into trouble if a
GFP_ATOMIC allocation is the first one performed for a certain size
of dma kmalloc slab.

- Move the adding of the slab to sysfs into a workqueue
  (sysfs does GFP_KERNEL allocations)
- Do not call kmem_cache_destroy() (uses slub_lock)
- Only acquire the slub_lock once and--if we cannot wait--do a trylock.

  This introduces a slight risk of the first kmalloc(x, GFP_DMA|GFP_ATOMIC)
  for a range of sizes failing due to another process holding the slub_lock.
  However, we only need to acquire the spinlock once in order to establish
  each power of two DMA kmalloc cache. The possible conflict is with the
  slub_lock taken during slab management actions (create / remove slab cache).

  It is rather typical that a driver will first fill its buffers using
  GFP_KERNEL allocations which will wait until the slub_lock can be acquired.
  Drivers will also create its slab caches first outside of an atomic
  context before starting to use atomic kmalloc from an interrupt context.

  If there are any failures then they will occur early after boot or when
  loading of multiple drivers concurrently. Drivers can already accomodate
  failures of GFP_ATOMIC for other reasons. Retries will then create the slab.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2007-08-09 21:57:16 -07:00
Christoph Lameter fcda3d89bf SLUB: Remove checks for MAX_PARTIAL from kmem_cache_shrink
The MAX_PARTIAL checks were supposed to be an optimization. However, slab
shrinking is a manually triggered process either through running slabinfo
or by the kernel calling kmem_cache_shrink.

If one really wants to shrink a slab then all operations should be done
regardless of the size of the partial list. This also fixes an issue that
could surface if the number of partial slabs was initially above MAX_PARTIAL
in kmem_cache_shrink and later drops below MAX_PARTIAL through the
elimination of empty slabs on the partial list (rare). In that case a few
slabs may be left off the partial list (and only be put back when they
are empty).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2007-08-09 21:57:15 -07:00
Peter Zijlstra 2208b764c1 slub: fix bug in slub debug support
We ClearSlabDebug() before the last SlabDebug() check. Clear it later.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2007-07-30 12:15:15 -07:00
Peter Zijlstra 02febdf7f6 slub: add lock debugging check
Ingo noticed that the SLUB code does include the lock debugging free
check.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2007-07-30 12:12:39 -07:00
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Linus Torvalds 9550b105b8 slub: fix ksize() for zero-sized pointers
The slab and slob allocators already did this right, but slub would call
"get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty
end results.

Noted by Ingo Molnar.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 13:21:34 -07:00
Christoph Lameter 8ab1372fac SLUB: Fix CONFIG_SLUB_DEBUG use for CONFIG_NUMA
We currently cannot disable CONFIG_SLUB_DEBUG for CONFIG_NUMA.  Now that
embedded systems start to use NUMA we may need this.

Put an #ifdef around places where NUMA only code uses fields only valid
for CONFIG_SLUB_DEBUG.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Christoph Lameter a0e1d1be20 SLUB: Move sysfs operations outside of slub_lock
Sysfs can do a gazillion things when called.  Make sure that we do not call
any sysfs functions while holding the slub_lock.

Just protect the essentials:

1. The list of all slab caches
2. The kmalloc_dma array
3. The ref counters of the slabs.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Christoph Lameter 434e245ddd SLUB: Do not allocate object bit array on stack
The objects per slab increase with the current patches in mm since we allow up
to order 3 allocs by default.  More patches in mm actually allow to use 2M or
higher sized slabs.  For slab validation we need per object bitmaps in order
to check a slab.  We end up with up to 64k objects per slab resulting in a
potential requirement of 8K stack space.  That does not look good.

Allocate the bit arrays via kmalloc.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Christoph Lameter 81cda66261 Slab allocators: Cleanup zeroing allocations
It becomes now easy to support the zeroing allocs with generic inline
functions in slab.h.  Provide inline definitions to allow the continued use of
kzalloc, kmem_cache_zalloc etc but remove other definitions of zeroing
functions from the slab allocators and util.c.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00
Christoph Lameter ce15fea827 SLUB: Do not use length parameter in slab_alloc()
We can get to the length of the object through the kmem_cache_structure.  The
additional parameter does no good and causes the compiler to generate bad
code.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00
Christoph Lameter 12ad6843dd SLUB: Style fix up the loop to disable small slabs
Do proper spacing and we only need to do this in steps of 8.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00
Adrian Bunk 5af328a510 mm/slub.c: make code static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00
Christoph Lameter 7b55f620e6 SLUB: Simplify dma index -> size calculation
There is no need to caculate the dma slab size ourselves. We can simply
lookup the size of the corresponding non dma slab.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00
Christoph Lameter f1b2633936 SLUB: faster more efficient slab determination for __kmalloc
kmalloc_index is a long series of comparisons.  The attempt to replace
kmalloc_index with something more efficient like ilog2 failed due to compiler
issues with constant folding on gcc 3.3 / powerpc.

kmalloc_index()'es long list of comparisons works fine for constant folding
since all the comparisons are optimized away.  However, SLUB also uses
kmalloc_index to determine the slab to use for the __kmalloc_xxx functions.
This leads to a large set of comparisons in get_slab().

The patch here allows to get rid of that list of comparisons in get_slab():

1. If the requested size is larger than 192 then we can simply use
   fls to determine the slab index since all larger slabs are
   of the power of two type.

2. If the requested size is smaller then we cannot use fls since there
   are non power of two caches to be considered. However, the sizes are
   in a managable range. So we divide the size by 8. Then we have only
   24 possibilities left and then we simply look up the kmalloc index
   in a table.

Code size of slub.o decreases by more than 200 bytes through this patch.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00
Christoph Lameter dfce8648d6 SLUB: do proper locking during dma slab creation
We modify the kmalloc_cache_dma[] array without proper locking.  Do the proper
locking and undo the dma cache creation if another processor has already
created it.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:01 -07:00