The max CPU capacity is the same for all CPUs sharing frequency domain.
There is a way to avoid heavy operations in a loop for each CPU by
leveraging this knowledge. Thus, simplify the looping code in the
sugov_next_freq_shared() and drop heavy multiplications. Instead, use
simple max() to get the highest utilization from these CPUs.
This is useful for platforms with many (4 or 6) little CPUs. We avoid
heavy 2*PD_CPU_NUM multiplications in that loop, which is called billions
of times, since it's not limited by the schedutil time delta filter in
sugov_should_update_freq(). When there was no need to change frequency
the code bailed out, not updating the sg_policy::last_freq_update_time.
Then every visit after delta_ns time longer than the
sg_policy::freq_update_delay_ns goes through and triggers the next
frequency calculation code. Although, if the next frequency, as outcome
of that, would be the same as current frequency, we won't update the
sg_policy::last_freq_update_time and the story will be repeated (in
a very short period, sometimes a few microseconds).
The max CPU capacity must be fetched every time we are called, due to
difficulties during the policy setup, where we are not able to get the
normalized CPU capacity at the right time.
The fetched CPU capacity value is than used in sugov_iowait_apply() to
calculate the right boost. This required a few changes in the local
functions and arguments. The capacity value should hopefully be fetched
once when needed and then passed over CPU registers to those functions.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221208160256.859-2-lukasz.luba@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
ttwu_do_activate() is used for a complete wakeup, in which we will
activate_task() and use ttwu_do_wakeup() to mark the task runnable
and perform wakeup-preemption, also call class->task_woken() callback
and update the rq->idle_stamp.
Since ttwu_runnable() is not a complete wakeup, don't need all those
done in ttwu_do_wakeup(), so we can move those to ttwu_do_activate()
to simplify ttwu_do_wakeup(), making it only mark the task runnable
to be reused in ttwu_runnable() and try_to_wake_up().
This patch should not have any functional changes.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221223103257.4962-2-zhouchengming@bytedance.com
ttwu_runnable() is used as a fast wakeup path when the wakee task
is running on CPU or runnable on RQ, in both cases we can just
set its state to TASK_RUNNING to prevent a sleep.
If the wakee task is on_cpu running, we don't need to update_rq_clock()
or check_preempt_curr().
But if the wakee task is on_rq && !on_cpu (e.g. an IRQ hit before
the task got to schedule() and the task been preempted), we should
check_preempt_curr() to see if it can preempt the current running.
This also removes the class->task_woken() callback from ttwu_runnable(),
which wasn't required per the RT/DL implementations: any required push
operation would have been queued during class->set_next_task() when p
got preempted.
ttwu_runnable() also loses the update to rq->idle_stamp, as by definition
the rq cannot be idle in this scenario.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221223103257.4962-1-zhouchengming@bytedance.com
Add a document explaining the util clamp feature: what it is and
how to use it. The new document hopefully covers everything one needs to
know about uclamp.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20221216235716.201923-1-qyousef@layalina.io
Cc: Jonathan Corbet <corbet@lwn.net>
sched_mm_cid_after_execve() does not expect NULL t->mm, but it may happen
if a usermodehelper kthread fails when attempting to execute a binary.
sched_mm_cid_fork() can be issued from a usermodehelper kthread, which
has t->flags PF_KTHREAD set.
Fixes: af7f588d8f ("sched: Introduce per-memory-map concurrency ID")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/oe-lkp/202212301353.5c959d72-yujie.liu@intel.com
The archs that use cputime_to_nsecs() internally provide their own
definition and don't need the fallback. cputime_to_usecs() unused except
in this fallback, and is not defined anywhere.
This removes the final remnant of the cputime_t code from the kernel.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220070705.2958959-1-npiggin@gmail.com
When select_idle_capacity() starts scanning for an idle CPU, it starts
with target CPU that has already been checked in select_idle_sibling().
So we start checking from the next CPU and try the target CPU at the end.
Similarly for task_numa_assign(), we have just checked numa_migrate_on
of dst_cpu, so start from the next CPU. This also works for
steal_cookie_task(), the first scan must fail and start directly
from the next one.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-3-jiahao.os@bytedance.com
In update_numa_stats() we try to find an idle cpu on the NUMA node,
preferably an idle core. we can stop looking for the next idle core
or idle cpu after finding an idle core. But we can't stop the
whole loop of scanning the CPU, because we need to calculate
approximate NUMA stats at a point in time. For example,
the src and dst nr_running is needed by task_numa_find_cpu().
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-2-jiahao.os@bytedance.com
With a modified container_of() that preserves constness, the compiler
finds some pointers which should have been marked as const. task_of()
also needs to become const-preserving for the !FAIR_GROUP_SCHED case so
that cfs_rq_of() can take a const argument. No change to generated code.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221212144946.2657785-1-willy@infradead.org
Add the mm_cid field to the rseq_update event, allowing tracers to
follow which mm_cid is observed by user-space, and whether negative
mm_cid values are visible in case of internal scheduler implementation
issues.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-22-mathieu.desnoyers@efficios.com
Adapt to the rseq.h API changes introduced by commits
"selftests/rseq: <arch>: Template memory ordering and percpu access mode".
Build a new param_test_mm_cid, param_test_mm_cid_benchmark, and
param_test_mm_cid_compare_twice executables to test the new "mm_cid"
rseq field.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-20-mathieu.desnoyers@efficios.com
Adapt to the rseq.h API changes introduced by commits
"selftests/rseq: <arch>: Template memory ordering and percpu access mode".
Build a new basic_percpu_ops_mm_cid_test to test the new "mm_cid" rseq
field.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-19-mathieu.desnoyers@efficios.com
Introduce a rseq-riscv-bits.h template header which is internally included
to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-18-mathieu.desnoyers@efficios.com
Introduce a rseq-s390-bits.h template header which is internally included
to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-17-mathieu.desnoyers@efficios.com
Introduce a rseq-ppc-bits.h template header which is internally included
to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-16-mathieu.desnoyers@efficios.com
Introduce a rseq-mips-bits.h template header which is internally
included to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-15-mathieu.desnoyers@efficios.com
Introduce a rseq-arm64-bits.h template header which is internally
included to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-14-mathieu.desnoyers@efficios.com
Introduce a rseq-arm-bits.h template header which is internally included
to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-13-mathieu.desnoyers@efficios.com
Introduce a rseq-x86-bits.h template header which is internally included
to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
This introduces changes to the rseq.h selftests API which require to
update the rseq selftest programs. Similar API/templating changes need
to be done for other architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-12-mathieu.desnoyers@efficios.com
This code is not currently build by the test Makefile, adds complexity,
and is not overall useful considering that the abort handling loops to
retry the fast-path.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-10-mathieu.desnoyers@efficios.com
If a memory map has fewer threads than there are cores on the system, or
is limited to run on few cores concurrently through sched affinity or
cgroup cpusets, the concurrency IDs will be values close to 0, thus
allowing efficient use of user-space memory for per-cpu data structures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-9-mathieu.desnoyers@efficios.com
This feature allows the scheduler to expose a per-memory map concurrency
ID to user-space. This concurrency ID is within the possible cpus range,
and is temporarily (and uniquely) assigned while threads are actively
running within a memory map. If a memory map has fewer threads than
cores, or is limited to run on few cores concurrently through sched
affinity or cgroup cpusets, the concurrency IDs will be values close
to 0, thus allowing efficient use of user-space memory for per-cpu
data structures.
This feature is meant to be exposed by a new rseq thread area field.
The primary purpose of this feature is to do the heavy-lifting needed
by memory allocators to allow them to use per-cpu data structures
efficiently in the following situations:
- Single-threaded applications,
- Multi-threaded applications on large systems (many cores) with limited
cpu affinity mask,
- Multi-threaded applications on large systems (many cores) with
restricted cgroup cpuset per container.
One of the key concern from scheduler maintainers is the overhead
associated with additional spin locks or atomic operations in the
scheduler fast-path. This is why the following optimization is
implemented.
On context switch between threads belonging to the same memory map,
transfer the mm_cid from prev to next without any atomic ops. This
takes care of use-cases involving frequent context switch between
threads belonging to the same memory map.
Additional optimizations can be done if the spin locks added when
context switching between threads belonging to different memory maps end
up being a performance bottleneck. Those are left out of this patch
though. A performance impact would have to be clearly demonstrated to
justify the added complexity.
The credit goes to Paul Turner (Google) for the original virtual cpu id
idea. This feature is implemented based on the discussions with Paul
Turner and Peter Oskolkov (Google), but I took the liberty to implement
scheduler fast-path optimizations and my own NUMA-awareness scheme. The
rumor has it that Google have been running a rseq vcpu_id extension
internally in production for a year. The tcmalloc source code indeed has
comments hinting at a vcpu_id prototype extension to the rseq system
call [1].
The following benchmarks do not show any significant overhead added to
the scheduler context switch by this feature:
* perf bench sched messaging (process)
Baseline: 86.5±0.3 ms
With mm_cid: 86.7±2.6 ms
* perf bench sched messaging (threaded)
Baseline: 84.3±3.0 ms
With mm_cid: 84.7±2.6 ms
* hackbench (process)
Baseline: 82.9±2.7 ms
With mm_cid: 82.9±2.9 ms
* hackbench (threaded)
Baseline: 85.2±2.6 ms
With mm_cid: 84.4±2.9 ms
[1] https://github.com/google/tcmalloc/blob/master/tcmalloc/internal/linux_syscall_support.h#L26
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-8-mathieu.desnoyers@efficios.com
Test the NUMA node id extension rseq field. Compare it against the value
returned by the getcpu(2) system call while pinned on a specific core.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-7-mathieu.desnoyers@efficios.com
Adding the NUMA node id to struct rseq is a straightforward thing to do,
and a good way to figure out if anything in the user-space ecosystem
prevents extending struct rseq.
This NUMA node id field allows memory allocators such as tcmalloc to
take advantage of fast access to the current NUMA node id to perform
NUMA-aware memory allocation.
It can also be useful for implementing fast-paths for NUMA-aware
user-space mutexes.
It also allows implementing getcpu(2) purely in user-space.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-5-mathieu.desnoyers@efficios.com
Introduce the extensible rseq ABI, where the feature size supported by
the kernel and the required alignment are communicated to user-space
through ELF auxiliary vectors.
This allows user-space to call rseq registration with a rseq_len of
either 32 bytes for the original struct rseq size (which includes
padding), or larger.
If rseq_len is larger than 32 bytes, then it must be large enough to
contain the feature size communicated to user-space through ELF
auxiliary vectors.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-4-mathieu.desnoyers@efficios.com
Export the rseq feature size supported by the kernel as well as the
required allocation alignment for the rseq per-thread area to user-space
through ELF auxiliary vector entries.
This is part of the extensible rseq ABI.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-3-mathieu.desnoyers@efficios.com
When linking the selftests against a libc which does not handle rseq
registration (before 2.35), rseq thread registration silently succeed
even with CONFIG_RSEQ=n because it erroneously thinks that libc is
handling rseq registration.
This is caused by setting the rseq ownership flag only after the
rseq_available() check. It should rather be set before the
rseq_available() check.
Set the rseq_size to 0 (error value) immediately after the
rseq_available() check fails rather than in the thread registration
functions.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-2-mathieu.desnoyers@efficios.com
CFS bandwidth currently distributes new runtime and unthrottles cfs_rq's
inline in an hrtimer callback. Runtime distribution is a per-cpu
operation, and unthrottling is a per-cgroup operation, since a tg walk
is required. On machines with a large number of cpus and large cgroup
hierarchies, this cpus*cgroups work can be too much to do in a single
hrtimer callback: since IRQ are disabled, hard lockups may easily occur.
Specifically, we've found this scalability issue on configurations with
256 cpus, O(1000) cgroups in the hierarchy being throttled, and high
memory bandwidth usage.
To fix this, we can instead unthrottle cfs_rq's asynchronously via a
CSD. Each cpu is responsible for unthrottling itself, thus sharding the
total work more fairly across the system, and avoiding hard lockups.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221117005418.3499691-1-joshdon@google.com
init_defrootdomain is only used in initialization
Signed-off-by: Bing Huang <huangbing@kylinos.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20221118034208.267330-1-huangbing775@126.com
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message on
fsl_spi hardware, this should be very unusual.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOmIFQACgkQJNaLcl1U
h9BD2Qf/byfpQzO+8mnDIenWP3X/WMNxJybIe1zaZXOEPRdxmE24Q7BvROnu/80C
jiKGJ3x/n5dhgnBvBJYdTw93BwDUJIcoz42WHnJMxRpxHPd/IX9N8NEOtMU5Z7T6
R/9LPpTja33CXXqbvhZw2M1dhVxbEZ9VgPVOemz0nLQtYnM4/Y8wj2RFOGgJFZ91
krY8S7VkLp6ycdv+a9ofMck+l05zpQ7TG54Nmr/0wvexosj7x7JLyZx6CahGL4/E
PMF7MDblLIrCvMtJPs2gpjHTiAReu85akoOvxBcZc5JNNynp8GXmDcOwgPRbZ7pi
bAJzH0LnwPQycTX+e46QMpViyVll7g==
=zqM3
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message
on fsl_spi hardware, this should be very unusual"
* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl_spi: Don't change speed while chipselect is active
Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another fixing
a problem with supply lookup introduced by the fixes for devm related
use after free issues that were introduced in this merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOmHd4ACgkQJNaLcl1U
h9A8hQf/fTezN966/Rp9tvP9YJOPmluqoqDxp/kbyfs3wXlhGR51rytXk/h0DDUD
U8VYIzIyJ7RyqNRtbSqoaNKTCq73Z2/eWl3O/Tsw/mVbpsPHbgDFG4qmM3wE88Rm
u6tOFHouTMQPSJ1yDWJrnR627uRQsnjmJbElSkSWXGWVtJnBqbj+QPGal+hXR/lv
0Fo3nvKvLG5W7GkRh7rRTBu+reJAM4piFQzWxWStiyQwgRLZzpPbgXmpPfto7J5L
WeRMEJkprUVdps+DuylnsHHPD1EA0sBwvs5FQ7yKFuWoejZLC/loW51uColwiIOw
uhQlLzm8WwLePjYQPatHDegxu056fg==
=YhNZ
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another
fixing a problem with supply lookup introduced by the fixes for devm
related use after free issues that were introduced in this merge
window"
* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix deadlock on regulator enable
regulator: core: Fix resolve supply lookup issue
Use "grep -E" instead of "egrep".
-----BEGIN PGP SIGNATURE-----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=m/60
-----END PGP SIGNATURE-----
Merge tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccicheck update from Julia Lawall:
"Modernize use of grep in coccicheck:
Use 'grep -E' instead of 'egrep'"
* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: use "grep -E" instead of "egrep"
Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent allocator,
and then add a check to make sure no one passes the flag ever again.
-----BEGIN PGP SIGNATURE-----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=q0m6
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent
allocator, and then add a check to make sure no one passes the flag
ever again"
* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject GFP_COMP for noncoherent allocations
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
- improve p9_check_errors to check buffer size instead of msize when possible
(e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
-----BEGIN PGP SIGNATURE-----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=xLkl
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include
A few more updates for 6.2 since the last PR: most of changes are
about ASoC device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks
-----BEGIN PGP SIGNATURE-----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=2Uko
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few more updates for 6.2: most of changes are about ASoC
device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks"
* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
ASoC: lochnagar: Fix unused lochnagar_of_match warning
ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
ASoC: SOF: mediatek: initialize panic_info to zero
ASoC: rt5670: Remove unbalanced pm_runtime_put()
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: mediatek: mt8195: add sof be ops to check audio active
ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
ALSA: hda/hdmi: fix i915 silent stream programming flow
ALSA: hda: Error out if invalid stream is being setup
ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
ASoC: codecs: wcd-clsh: Remove the unused function
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY6TcIgAKCRDdBJ7gKXxA
ji/zAQDucpSw+HKksgDpO385EAdF4gQgYDi06zu/vjpF7Hd4KAEAoIX1ygHqHy3u
z9xuulA9q84COV48Is9cU7eiijd0aQo=
=QlXq
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Eight fixes, all cc:stable. One is for gcov and the remainder are MM"
* tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
If mem-type is specified in the device tree
it would end up overriding the record_size
field instead of populating mem_type.
As record_size is currently parsed after the
improper assignment with default size 0 it
continued to work as expected regardless of the
value found in the device tree.
Simply changing the target field of the struct
is enough to get mem-type working as expected.
Fixes: 9d843e8faf ("pstore: Add mem_type property DT parsing support")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Stefani <luca@osomprivacy.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222131049.286288-1-luca@osomprivacy.com
In commit 76d62f24db ("pstore: Switch pmsg_lock to an rt_mutex
to avoid priority inversion") I changed a lock to an rt_mutex.
However, its possible that CONFIG_RT_MUTEXES is not enabled,
which then results in a build failure, as the 0day bot detected:
https://lore.kernel.org/linux-mm/202212211244.TwzWZD3H-lkp@intel.com/
Thus this patch changes CONFIG_PSTORE_PMSG to select
CONFIG_RT_MUTEXES, which ensures the build will not fail.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: Connor O'Brien <connoro@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: kernel-team@android.com
Fixes: 76d62f24db ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221221051855.15761-1-jstultz@google.com
When CFI_CLANG and KASAN are both enabled, LLVM doesn't generate a
CFI type hash for asan.module_ctor functions in translation units
where CFI is disabled, which leads to a CFI failure during boot when
do_ctors calls the affected constructors:
CFI failure at do_basic_setup+0x64/0x90 (target:
asan.module_ctor+0x0/0x28; expected type: 0xa540670c)
Specifically, this happens because CFI is disabled for
kernel/cfi.c. There's no reason to keep CFI disabled here anymore, so
fix the failure by not filtering out CC_FLAGS_CFI for the file.
Note that https://reviews.llvm.org/rG3b14862f0a96 fixed the issue
where LLVM didn't emit CFI type hashes for any sanitizer constructors,
but now type hashes are emitted correctly for TUs that use CFI.
Link: https://github.com/ClangBuiltLinux/linux/issues/1742
Fixes: 8924560094 ("cfi: Switch to -fsanitize=kcfi")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222225747.3538676-1-samitolvanen@google.com
Lukasz Luba