This was removed long ago, back in:
6e16d9409e ([PARISC] Convert soft power switch driver to kthread)
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
This change simplifies the VF initialization check and also minimizes
the delay between acquiring the VSI pointer and using it. As known by
the commit being fixed, there is a risk of the VSI pointer getting
changed. Therefore minimize the delay between getting and using the
pointer.
Fixes: 9889707b06 ("i40e: Fix crash caused by stress setting of VF MAC addresses")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.
First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.
Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.
Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.
Fixes: 152b978a1f ("ice: Rework ice_ena_msix_range")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently users could create more channels than LAN MSI-X available.
This is happening because there is no check against pf->num_lan_msix
when checking the max allowed channels and will cause performance issues
if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not
allowing more channels than LAN MSI-X available in pf->num_lan_msix.
Fixes: 87324e747f ("ice: Implement ethtool ops for channels")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the driver to copy the MAC address configured in ndo_set_mac_address
into dev_addr, even if the MAC filter already exists in HW. In some
situations (e.g. bonding) the netdev's dev_addr could have been modified
outside of the driver, with no change to the HW filter, so the driver
cannot assume that they match.
Fixes: 757976ab16 ("ice: Fix check for removing/adding mac filters")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch is based on a similar change to i40e by Slawomir Laba:
"i40e: Implement flow for IPv6 next header (extension header)".
When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.
The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6.
The extension header was not skipped at all.
The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.
Fixes: a4e82a81f5 ("ice: Add support for tunnel offloads")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The packet classifier would occasionally misrecognize an IPv6 training
packet when the next protocol field was 0. The correct value for
unspecified protocol is IPPROTO_NONE.
Fixes: 165d80d6ad ("ice: Support IPv6 Flow Director filters")
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit d3921cb8be.
Chris Wilson reports that it causes boot problems:
"We have half a dozen or so different machines in CI that are silently
failing to boot, that we believe is bisected to this patch"
and the CI team confirmed that a revert fixed the issues.
The cause is unknown for now, so let's revert it.
Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
raw_fmt->height in never initialized. But width in initialized twice.
Fixes: 88d06362d1 ("media: hantro: Refactor for V4L2 API spec compliancy")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
During H264 API overhaul subtle bug was introduced Cedrus driver.
Progressive references have both, top and bottom reference flags set.
Cedrus reference list expects only bottom reference flag and only when
interlaced frames are decoded. However, due to a bug in Cedrus check,
exclusivity is not tested and that flag is set also for progressive
references. That causes "jumpy" background with many videos.
Fix that by checking that only bottom reference flag is set in control
and nothing else.
Tested-by: Andre Heider <a.heider@gmail.com>
Fixes: cfc8c3ed53 ("media: cedrus: h264: Properly configure reference field")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The BIT macro is not available in userspace, so replace BIT(0) by
0x00000001.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 6446ec6cbf ("media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctl")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the __is_lm_address() check just masks out the top 12 bits
of the address, but if they are 0, it still yields a true result.
This has as a side effect that virt_addr_valid() returns true even for
invalid virtual addresses (e.g. 0x0).
Fix the detection checking that it's actually a kernel address starting
at PAGE_OFFSET.
Fixes: 68dd8ef321 ("arm64: memory: Fix virt_addr_valid() using __is_lm_address()")
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Will Deacon <will@kernel.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210126134056.45747-1-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If the tctx inflight number haven't changed because of cancellation,
__io_uring_task_cancel() will continue leaving the task in
TASK_UNINTERRUPTIBLE state, that's not expected by
__io_uring_files_cancel(). Ensure we always call finish_wait() before
retrying.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fixup_pi_state_owner() tries to ensure that the state of the rtmutex,
pi_state and the user space value related to the PI futex are consistent
before returning to user space. In case that the user space value update
faults and the fault cannot be resolved by faulting the page in via
fault_in_user_writeable() the function returns with -EFAULT and leaves
the rtmutex and pi_state owner state inconsistent.
A subsequent futex_unlock_pi() operates on the inconsistent pi_state and
releases the rtmutex despite not owning it which can corrupt the RB tree of
the rtmutex and cause a subsequent kernel stack use after free.
It was suggested to loop forever in fixup_pi_state_owner() if the fault
cannot be resolved, but that results in runaway tasks which is especially
undesired when the problem happens due to a programming error and not due
to malice.
As the user space value cannot be fixed up, the proper solution is to make
the rtmutex and the pi_state consistent so both have the same owner. This
leaves the user space value out of sync. Any subsequent operation on the
futex will fail because the 10th rule of PI futexes (pi_state owner and
user space value are consistent) has been violated.
As a consequence this removes the inept attempts of 'fixing' the situation
in case that the current task owns the rtmutex when returning with an
unresolvable fault by unlocking the rtmutex which left pi_state::owner and
rtmutex::owner out of sync in a different and only slightly less dangerous
way.
Fixes: 1b7558e457 ("futexes: fix fault handling in futex_lock_pi")
Reported-by: gzobqq@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Too many gotos already and an upcoming fix would make it even more
unreadable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
No point in open coding it. This way it gains the extra sanity checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Nothing uses the argument. Remove it as preparation to use
pi_state_update_owner().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Updating pi_state::owner is done at several places with the same
code. Provide a function for it and use that at the obvious places.
This is also a preparation for a bug fix to avoid yet another copy of the
same code or alternatively introducing a completely unpenetratable mess of
gotos.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
If that unexpected case of inconsistent arguments ever happens then the
futex state is left completely inconsistent and the printk is not really
helpful. Replace it with a warning and make the state consistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
In case that futex_lock_pi() was aborted by a signal or a timeout and the
task returned without acquiring the rtmutex, but is the designated owner of
the futex due to a concurrent futex_unlock_pi() fixup_owner() is invoked to
establish consistent state. In that case it invokes fixup_pi_state_owner()
which in turn tries to acquire the rtmutex again. If that succeeds then it
does not propagate this success to fixup_owner() and futex_lock_pi()
returns -EINTR or -ETIMEOUT despite having the futex locked.
Return success from fixup_pi_state_owner() in all cases where the current
task owns the rtmutex and therefore the futex and propagate it correctly
through fixup_owner(). Fixup the other callsite which does not expect a
positive return value.
Fixes: c1e2f0eaf0 ("futex: Avoid violating the 10th rule of futex")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
The first thing the active retirement worker does is decrement the
i915_active count.
The first thing we do during i915_active_wait is try to increment the
i915_active count, but only if already active [non-zero].
The wait may see that the retirement is already started and so marked the
i915_active as idle, and skip waiting for the retirement handler.
However, the caller of i915_active_wait may immediately free the
i915_active upon returning (e.g. i915_vma_destroy) so we must not return
before the concurrent access from the worker is completed. We must
always flush the worker.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2473
Fixes: 274cbf20fd ("drm/i915: Push the i915_active.retire into a worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121232807.16618-1-chris@chris-wilson.co.uk
(cherry picked from commit 977a372e972cb42799746c284035a33c64ebace9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Object out is not released on path that no VMA instance found. The root
cause is jumping to an unexpected label on the error path.
Fixes: a47e788c23 ("drm/i915/selftests: Exercise CS TLB invalidation")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122015640.16002-1-bianpan2016@163.com
(cherry picked from commit 2b015017d5cb01477a79ca184ac25c247d664568)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Current code is checking only 2 bits in the subplatform, but actually 3
bits are allocated for the field. Check all 3 bits.
Fixes: 805446c834 ("drm/i915: Introduce concept of a sub-platform")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121161936.746591-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 27b695ee1af9bb36605e67055874ec081306ac28)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The MH PHY vswing table does have all the entries these days. Get
rid of the old hacks in the code which claim otherwise.
This hack was totally bogus anyway. The correct way to handle the
lack of those two entries would have been to declare our max
vswing and pre-emph to both be level 2.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Fixes: 9f7ffa2979 ("drm/i915/tc/icl: Update TC vswing tables")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201207203512.1718-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 5ec346476e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since we do a bare context switch with no restore, the clear residual
kernel runs on dirty state, and we must be careful to avoid executing
with bad state from context registers inherited from a malicious client.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2955
Fixes: 09aa9e4586 ("drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail")
Testcase: igt/gem_ctx_isolation # ivb,vlv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210117093015.29143-1-chris@chris-wilson.co.uk
(cherry picked from commit ace44e13e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
More fixes for v5.11, almost all driver specific issues including new
device IDs - there's one error handling fix for the topology stuff too.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAQCxMACgkQJNaLcl1U
h9CmOwf8DWMyWBjrGyWQj6x428W+3abz/rIdyjA09H6cZoriZ9nLqerDQLmFrh/u
jFvCSdla0FDE8uw33nWp9KC5KBH99JdKE9uGTMhwn/kQuOackrw6tRw7SUOwykGr
MfT7Dlge8P3lwjV7/s/VrXpy0I/RTUbw1fELMn8ArqcQxO5qV32JFOWOAYIcwH+l
vAPFP8ZR/aJJ42nT5TZdQTc2gEchE2KJGhmgWNu6hWLHxznW36lYIf+76DWoEcI7
pdD8MmRVyutsauaOdJj3y7LJrmUyE/f6vS9opSfiskKAvd8fq5TMP+wzMvYVwpsP
5MJVW1uVIOYzsb1DRMridM43SRon+g==
=L8rT
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.11-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
More fixes for v5.11, almost all driver specific issues including new
device IDs - there's one error handling fix for the topology stuff too.
This code ends up calling wiphy_apply_custom_regulatory(), for which
we document that it should be called before wiphy_register(). This
driver doesn't do that, but calls it from ndo_open() with the RTNL
held, which caused deadlocks.
Since the driver just registers static regdomain data and then the
notifier applies the channel changes if any, there's no reason for
it to call this in ndo_open(), move it earlier to fix the deadlock.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 51d62f2f2c ("cfg80211: Save the regulatory domain with a lock")
Link: https://lore.kernel.org/r/20210126115409.d5fd6f8fe042.Ib5823a6feb2e2aa01ca1a565d2505367f38ad246@changeid
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
syzbot reported a crash that happened when changing the interface
type around a lot, and while it might have been easy to fix just
the symptom there, a little deeper investigation found that really
the reason is that we allowed packets to be transmitted while in
the middle of changing the interface type.
Disallow TX by stopping the queues while changing the type.
Fixes: 34d4bc4d41 ("mac80211: support runtime interface type changes")
Reported-by: syzbot+d7a3b15976bf7de2238a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210122171115.b321f98f4d4f.I6997841933c17b093535c31d29355be3c0c39628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since cfg80211 doesn't implement commit, we never really cared about
that code there (and it's configured out w/o CONFIG_WIRELESS_EXT).
After all, since it has no commit, it shouldn't return -EIWCOMMIT to
indicate commit is needed.
However, EIWCOMMIT is actually an alias for EINPROGRESS, which _can_
happen if e.g. we try to change the frequency but we're already in
the process of connecting to some network, and drivers could return
that value (or even cfg80211 itself might).
This then causes us to crash because dev->wireless_handlers is NULL
but we try to check dev->wireless_handlers->standard[0].
Fix this by also checking dev->wireless_handlers. Also simplify the
code a little bit.
Cc: stable@vger.kernel.org
Reported-by: syzbot+444248c79e117bc99f46@syzkaller.appspotmail.com
Reported-by: syzbot+8b2a88a09653d4084179@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210121171621.2076e4a37d5a.I5d9c72220fe7bb133fb718751da0180a57ecba4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The recent commit to fix a memory leak introduced an inadvertant NULL
pointer dereference. The `wacom_wac->pen_fifo` variable was never
intialized, resuling in a crash whenever functions tried to use it.
Since the FIFO is only used by AES pens (to buffer events from pen
proximity until the hardware reports the pen serial number) this would
have been easily overlooked without testing an AES device.
This patch converts `wacom_wac->pen_fifo` over to a pointer (since the
call to `devres_alloc` allocates memory for us) and ensures that we assign
it to point to the allocated and initalized `pen_fifo` before the function
returns.
Link: https://github.com/linuxwacom/input-wacom/issues/230
Fixes: 37309f47e2 ("HID: wacom: Fix memory leakage caused by kfifo_alloc")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is inline with the specification described in blkif.h:
* discard-granularity: should be set to the physical block size if
node is not present.
* discard-alignment, discard-secure: should be set to 0 if node not
present.
This was detected as QEMU would only create the discard-granularity
node but not discard-alignment, and thus the setup done in
blkfront_setup_discard would fail.
Fix blkfront_setup_discard to not fail on missing nodes, and also fix
blkif_set_queue_limits to set the discard granularity to the physical
block size if none is specified in xenbus.
Fixes: ed30bf317c ('xen-blkfront: Handle discard requests.')
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-By: Arthur Borsboom <arthurborsboom@gmail.com>
Link: https://lore.kernel.org/r/20210119105727.95173-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Prior to commit 7c03e2cda4 ("vfs: move cap_convert_nscap() call into
vfs_setxattr()") the translation of nscap->rootid did not take stacked
filesystems (overlayfs and ecryptfs) into account.
That patch fixed the overlay case, but made the ecryptfs case worse.
Restore old the behavior for ecryptfs that existed before the overlayfs
fix. This does not fix ecryptfs's handling of complex user namespace
setups, but it does make sure existing setups don't regress.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tyler Hicks <code@tyhicks.com>
Fixes: 7c03e2cda4 ("vfs: move cap_convert_nscap() call into vfs_setxattr()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
VMX also uses KVM_REQ_GET_NESTED_STATE_PAGES for the Hyper-V eVMCS,
which may need to be loaded outside guest mode. Therefore we cannot
WARN in that case.
However, that part of nested_get_vmcs12_pages is _not_ needed at
vmentry time. Split it out of KVM_REQ_GET_NESTED_STATE_PAGES handling,
so that both vmentry and migration (and in the latter case, independent
of is_guest_mode) do the parts that are needed.
Cc: <stable@vger.kernel.org> # 5.10.x: f2c7ef3ba: KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert the dirty/available tracking of GPRs now that KVM copies the GPRs
to the GHCB on any post-VMGEXIT VMRUN, even if a GPR is not dirty. Per
commit de3cd117ed ("KVM: x86: Omit caching logic for always-available
GPRs"), tracking for GPRs noticeably impacts KVM's code footprint.
This reverts commit 1c04d8c986.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the per-GPR dirty checks when synchronizing GPRs to the GHCB, the
GRPs' dirty bits are set from time zero and never cleared, i.e. will
always be seen as dirty. The obvious alternative would be to clear
the dirty bits when appropriate, but removing the dirty checks is
desirable as it allows reverting GPR dirty+available tracking, which
adds overhead to all flavors of x86 VMs.
Note, unconditionally writing the GPRs in the GHCB is tacitly allowed
by the GHCB spec, which allows the hypervisor (or guest) to provide
unnecessary info; it's the guest's responsibility to consume only what
it needs (the hypervisor is untrusted after all).
The guest and hypervisor can supply additional state if desired but
must not rely on that additional state being provided.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even when we are outside the nested guest, some vmcs02 fields
may not be in sync vs vmcs12. This is intentional, even across
nested VM-exit, because the sync can be delayed until the nested
hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those
rarely accessed fields.
However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to
be able to restore it. To fix that, call copy_vmcs02_to_vmcs12_rare()
before the vmcs12 contents are copied to userspace.
Fixes: 7952d769c2 ("KVM: nVMX: Sync rarely accessed guest fields only when needed")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On VMX, if we exit and then re-enter immediately without leaving
the vmx_vcpu_run() function, the kvm_entry event is not logged.
That means we will see one (or more) kvm_exit, without its (their)
corresponding kvm_entry, as shown here:
CPU-1979 [002] 89.871187: kvm_entry: vcpu 1
CPU-1979 [002] 89.871218: kvm_exit: reason MSR_WRITE
CPU-1979 [002] 89.871259: kvm_exit: reason MSR_WRITE
It also seems possible for a kvm_entry event to be logged, but then
we leave vmx_vcpu_run() right away (if vmx->emulation_required is
true). In this case, we will have a spurious kvm_entry event in the
trace.
Fix these situations by moving trace_kvm_entry() inside vmx_vcpu_run()
(where trace_kvm_exit() already is).
A trace obtained with this patch applied looks like this:
CPU-14295 [000] 8388.395387: kvm_entry: vcpu 0
CPU-14295 [000] 8388.395392: kvm_exit: reason MSR_WRITE
CPU-14295 [000] 8388.395393: kvm_entry: vcpu 0
CPU-14295 [000] 8388.395503: kvm_exit: reason EXTERNAL_INTERRUPT
Of course, not calling trace_kvm_entry() in common x86 code any
longer means that we need to adjust the SVM side of things too.
Signed-off-by: Lorenzo Brescia <lorenzo.brescia@edu.unito.it>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <160873470698.11652.13483635328769030605.stgit@Wayrath>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update various words, including the wrong parameter name and the vague
description of the usage of "slot" field.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201208043439.895-1-yuzenghui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The injection process of smi has two steps:
Qemu KVM
Step1:
cpu->interrupt_request &= \
~CPU_INTERRUPT_SMI;
kvm_vcpu_ioctl(cpu, KVM_SMI)
call kvm_vcpu_ioctl_smi() and
kvm_make_request(KVM_REQ_SMI, vcpu);
Step2:
kvm_vcpu_ioctl(cpu, KVM_RUN, 0)
call process_smi() if
kvm_check_request(KVM_REQ_SMI, vcpu) is
true, mark vcpu->arch.smi_pending = true;
The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as
0x0300 in the intel_perfmon_event_map[]. Correct its usage.
Fixes: 62079d8a43 ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:
shift exponent 197 is too large for 64-bit type 'long long unsigned int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348
kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177
kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308
kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709
kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210118025800.34620-1-like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add compile-time asserts in rsvd_bits() to guard against KVM passing in
garbage hardcoded values, and cap the upper bound at '63' for dynamic
values to prevent generating a mask that would overflow a u64.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113204515.3473079-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation classifies KVM_ENABLE_CAP with KVM_CAP_ENABLE_CAP_VM
as a vcpu ioctl, which is incorrect. Fix it by specifying it as a VM
ioctl.
Fixes: e5d83c74a5 ("kvm: make KVM_CAP_ENABLE_CAP_VM architecture agnostic")
Signed-off-by: Quentin Perret <qperret@google.com>
Message-Id: <20210108165349.747359-1-qperret@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
-----BEGIN PGP SIGNATURE-----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=GHVB
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #2
- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
Pull crypto fix from Herbert Xu:
"Fix a regression in the cesa driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvel/cesa - Fix tdma descriptor on 64-bit
Following RFC 6554 [1], the current order of fields is wrong for big
endian definition. Indeed, here is how the header looks like:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
This patch reorders fields so that big endian definition is now correct.
[1] https://tools.ietf.org/html/rfc6554#section-3
Fixes: cfa933d938 ("include: uapi: linux: add rpl sr header definition")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davidlohr Bueso